BeyerDynamic DT 770 Pro 80 Ohm

BEYERDYNAMIC DT-770 PRO, studio headphone, dynamic, closed, impedance 80 Ohm, pressure level 96dB/SPL, frequency response 5-35.000 Hz, diffusfeldentzerrt, weight 270g incl. cable, 3,5mm stereo jack with adapter 6.3mm, cable lenght 3m, coiled cable.

133 €

Presonus Eris E3.5 (Pair)

Nothing But the Truth.Eris E3.5 Active Media Reference MonitorsSound you can trust.PreSonus® Eris-series studio monitors are used worldwide by audio engineers who need to hear every detail of their recordings. Ideal for gaming and home video production, the Eris E3.5 employs the same technology as the larger Eris models to deliver studio-quality sound, with a smooth and accurate frequency response. Yet they’re compact enough to fit almost anywhere.Woofers that deliver a cleaner overall sound.Every Eris-series studio monitor utilizes a woven composite, low-frequency driver. The weave and nature of the Eris E3.5’s 3.5-inch woofer result in a more constant dispersion pattern throughout the frequency range, resulting in less time-smeared audio and cleaner overall sound.Smooth high end and wide sweet spot.The Eris E3.5 is equipped with a one-inch silk-dome tweeter that produces a smooth and refined sound, accurately reproducing transients and high frequencies. The tweeter is designed to radiate sound with a fairly wide dispersion pattern, creating a large optimal listening area or “sweet spot” so you can move around and still hear everything accurately.Easy-to-use controls.A speaker’s response is affected by where you place it and the acoustics of your space. That’s why Eris E3.5 active media reference monitors offer easy-to-adjust high- and low-frequency controls. A convenient front-panel volume knob sets both the speaker level and the integrated headphone amplifier level. Be careful with that volume knob, though: Eris E3.5s are driven by an onboard 25 watt/side power amplifier and can get a lot louder than you may expect, while still delivering clear, accurate audio.Connect to virtually any line-level source.With three different types of audio inputs, it’s easy to feed audio to your Eris monitors from a mixer, an interface, a media player, or almost any other line-level source. The Eris E3.5 is equipped with rear-panel, ¼-inch TRS and RCA inputs, as well as front-panel ⅛-inch stereo, unbalanced line inputs for use with mobile audio devices. With this selection, you’ll have no problem hooking your Eris speakers up with virtually any line-level source, including your smartphone or tablet. The loud, clear, front-panel headphone amplifier lets you work and play in stealth mode, without disturbing your housemates.Accuracy defined.Like all PreSonus monitor speakers, the Eris E3.5 offers consistent, accurate listening, with the smooth and even frequency response that has made Eris monitors popular around the world. Their compact and powerful design makes them an ideal solution for any small space.Want extra-deep low end? Pair compact Eris E3.5s with PreSonus’ powerful Temblor® T8 active subwoofer for a truly full-range sound system that fits almost anywhere. Specifications :3.5" Woofer with Kevlar diaphragm1" Tweeter with silk membraneFrequency range: 80-20,000 HzSound pressure level (SPL): 100 dBA (peak)Inputs: TRS jack (L/R balanced)RCA pair (L/R)Treble controlMF & HF controls (each -6 to +6 dB)AUX input on the front panel (stereo mini jack) for Smartphones, etc.Headphone jack on the front panel (stereo mini jack)Volume control on the front panel with on / off switch and LEDClass AB power amplifier (2x 25 W / side)Shielded against RF interferenceSwitch-on delay and output current limiterProtection against overheating and subsonic filterIncludes a mini jack cable (TRS to TRS, 1.5 m), adapter cable (mini jack TRS to 2x RCA, 1.5 m), and a connection cable that connects the left to the right monitorDimensions (W x D x H): 210 x 141 x 162 mmWeight: 2.9 k

107 €

Naim Uniti Atom (HDMI)

Uniti Atom is a beautiful, compact multi-source music player that will seduce you with its amazing sound quality and outstanding feature-set. Its 40-watt integrated amplifier and high-resolution music streaming capabilities will fill your home with stunning high-fidelity sound. Uniti Atom is perfect as a high-end main system or even for use in the kitchen or study, where space is at a premium. Just add speakers. Our Naim App for iOS and Android combines all of your music sources in one place, making Uniti Atom even more appealing.

3.290 €

Focal Chora 826-D Black (Pair)

Chora 826-D is a loudspeaker equipped with a specific speaker driver that reproduces Dolby Atmos® effects: for ultra-realistic 3D soundtracks and total immersion in the films you watch. Positioned on the top of the loudspeaker, this full-range speaker driver directs the sound towards the ceiling to reflect it back to the listener.  Action scenes in the air, pouring rain or a rolling thunder are all brought to life. At the same time, its directional baffle allows you to locate the sounds effects as though you had loudspeakers in the ceiling! Imagine a scene in a house: you hear conversations, but also the noise of cutlery, of footsteps... all of these spatialised in three dimensions as though you were actually there! Combining French manufacturing and design, this product also incorporates exclusive Focal technologies, particularly the Slatefiber cone of the midrange and bass speaker drivers or the Aluminium/Magnesium TNF tweeter for greater treble clarity.   For example, combined with the Chora Surround and Chora Center speakers, or the Chora Center and Chora 806 speakers, Chora 826-D guarantees a sensational system. THE TNF TWEETER A Focal exclusive and made in France in our workshops from an Aluminium/Magnesium alloy, this tweeter offers many benefits, particularly in sound spatialisation. With this tweeter, there is no shortage of sound harmony and precision. THE SLATEFIBER CONE Also made in France in Focal's workshops, it is characterised by a rich, dynamic and balanced sound, particularly in the midranges, as well as a stunning aesthetic thanks to its “slate” effect. It is the fruit of several years of R&D: the engineers have mixed ultra-lightweight recycled non-woven carbon fibres –a first in the world of audio– with thermoplastic polymer. The combination of these materials offers excellent acoustic performance. Specifications: Type: 3-way bass-reflex floorstanding loudspeaker.  Speaker drivers: 2x61/2" (16.5cm) Slatefiber Woofer 61/2" (16.5cm) Slatefiber Midrange 1" (25mm) TNF Al/Mg inverted dome tweeter. Sensitivity (2,83V/1m): 91dB Frequency response (±3 dB): 48Hz-28kHz  Low frequency point (-6 dB): 39Hz  Nominal impedance: 8Ω Minimum impedance: 2.9Ω Recommanded amplifier power: 40/250W  Crossover frequency: 270Hz - 2,700Hz  Dimensions (HxWxD): 417/16"x1115/16x151/4 (105,3cmx30,3x38,8cm)  Net weight (with grille): 48.5lbs (22.2kg)  Packaging dimensions (HxWxD): 441/2"x133/8x187/8 (113x34x48cm)  Net weight (with packaging): 59.5lbs (27kg)

1.690 €

Sonos One Alexa Gen 2 White

Smart Sound The powerful smart speaker with voice control built-in. Get rich, room-filling sound with Sonos One, and control it with your voice, the Sonos app, Apple AirPlay 2, and more. Brilliant sound for every room The compact design fits just about any space. Put it on your kitchen countertop or tuck it away on your office bookshelf. Voice control The Google Assistant and Amazon Alexa are built right-in so you can play music, check news, set alarms, get your questions answered, and more, completely hands-free. Stereo sound with two Pair two Sonos Ones together in the same room for stereo separation and more detailed sound. Use a pair as rear home cinema surrounds with Playbar, Playbase, or Beam. Introducing Sonos Radio Enjoy thousands of stations, including live radio and exclusive programming, on your system through the Sonos app. Features: Two Class-D digital amplifiers perfectly tuned to match the speaker drivers and acoustic architecture. Responsive audio chime lets you know Sonos One has heard you and is working on a response. Far-field microphone array, used for smart voice capture and noise cancellation. One tweeter creates a crisp and clear high-frequency response. One mid-woofer ensures you’ll hear the faithful playback of mid-range vocal frequencies plus deep, rich bass. Specifications: Dimensions - H x W x D: 6.36 x 4.69 x 4.69 in. (161.45 x 119.7 x 119.7 mm). Product finish:White with white matte grille or black with black matte grille. Top-panel features: Capacitive touch control for volume up/down, previous/next track, play/pause, microphone mute. LED indicates status, mute status and voice feedback. Complete privacy: An illuminated LED indicator light ensures you’re always aware when the speaker’s microphone is active. Weight: 4.08 lbs. (1.85 kg). Ethernet port: One 10/100 Mbps Ethernet port. Wire directly to your router to operate your Sonos if WiFi is unstable. Power supply: Auto-switching 100-240 V, 50-60 Hz AC universal input. WiFi, not Bluetooth: Connects to your home WiFi network with any 802.11b/g, 2.4 GHz broadcast-capable router for uninterrupted wireless streaming. Apple AirPlay 2: Works with AirPlay 2 on Apple devices iOS 11.4 and higher. Sonos One, power cord, Sonos One QuickStart Guide, and Legal/Warranty information.

229 €

Naim Mu-so Light Wood

Mu-so Wood Edition is an elegant new design based on the multi-award-winning wireless speaker system. Offering authentic audio expertise blended with the latest music-streaming technology, multiroom, delightful usability and the ability to transform your TV sound.

1.690 €

New

Focal Alpha 65 Evo

Evo stands for “evolution”. New features, new technologies, new design: the  Alpha 65 Evo studio monitors offer versatility and high performance at a competitive price point in their market. Designed for professional mixing in very heterogeneous environments, they make very reliable tools as accessible as possible.  Equipped with a Slatefiber cone, made in our workshops in France, the new Alpha Evo line also stands out for its robust design.

342 €

Warm Audio WA-47Jr Black

The WA-47jr is an FET transformerless version of the highly renowned classic ‘47 microphone that has been used on countless hit records for the last 50+ years.  The WA-47jr is fully discrete, has 3 polar patterns and is designed for pro studio, home studio, live, and broadcast applications.  The WA-47jr sounds great on vocals, acoustic/electric guitars, acoustic/electric bass, drums, piano, strings, brass/woodwind instruments, and an array of other sources.​The WA-47jr proudly utilizes a custom k47 style capsule reproduction, designed with the same hole pattern and frequency response as the vintage design.  Our version of this capsule (model# WA-47-B-80v) is carefully manufactured by an Australian capsule manufacturer with careful precision and repeat-ability that allows the most important sonic piece of the classic mic to be heard and influence the tone and signature of the WA-47jr.  The WA47jr's low-noise and discrete signal path, when paired with this excellent true '47 style capsule, allows it to obtain a very similar tone to the classic ‘47 microphone, but at a much lower price tag.  The WA-47jr utilizes the same k47 style capsule found in our flagship WA-47 tube condenser microphone.  Quality components make a better mic.The WA-47jr proudly utilizes a custom k47 style capsule reproduction, designed with the same hole pattern and frequency response as the vintage part.  Our version of this capsule (model# WA-47-B-80v) is carefully manufactured by an Australian capsule manufacturer with careful precision and repeat-ability.  The WA47jr's low-noise and discrete signal path then paired with an excellent true '47 style capsule allows this mic to obtain a very similar tone to the classic ‘47 microphone at a much lower price tag.  Specifications:FET transformerless '47 style condenser microphone.Custom true '47 capsule reproduction (k47 style) - Model# WA-47-B-80v.  Capsule makeup: Gold sputtered, dual large diaphragm, single backplate, 6 microns NOS mylar (PET film).Fully discrete signal path, Toshiba FET’s, Wima film capacitors, Panasonic electrolytic capacitors.Polar Patterns: Cardioid, figure-of-eight, and omnidirectional.High-pass filter: 70HzPad: -10dbSelf-noise: 9dBADynamic range: 138dBAMaximum SPL: 147/157dB (@1kHz 1kOhms 0.5% THD, 0/-10dB)Frequency Range: 20 Hz~20 kHzSensitivity: 10mV/Pa or -40dBOutput Impedance: 100 ohms​

295 €

Technics SU-C700EG-S

Premium Class Amplifier Employs innovative fully-digitised processing that delivers a pure and accurate signal to the speakers. Stereo Integrated Amplifier SU-C700 JENO Engine (Jitter Elimination and Noise-shaping Optimization) Just like the R1, the SU-C700 is a fully-digital amplifier and delivers high-resolution digital signals without any distortion being introduced between the input stage and output to the speakers. Technics has developed an original jitter-reduction circuit, avoiding the sound quality degradation due to jitter common to conventional digital amps. It uses a clock generator for the noise-shaping system to reduce jitter in the low-frequency range and a high-precision sample rate converter to suppress jitter in the high-frequency range. LAPC (Load Adaptive Phase Calibration) Technics has developed a speaker impedance optimisation algorithm, using digital signal processing to flatten both the amplitude and phase-frequency response to make the most of your speakers. The result is a sound with better focus, spaciousness and definition. High-speed Silent Linear Power Supply Using a large-current Schottky-barrier diode, a rectifier circuit with electrolytic capacitors, and a stabilised power supply circuit, the SU-C700 ensures ample power supply at all times, even when dynamic music demands high current. Battery Driven Clock Generator Technics used battery power for low-noise applications in analogue amplifiers in the past: here, this same technology is used to improve digital clock precision, enhancing the definition of the sound. High Rigidity Metal Double Chassis To reduce vibration and noise that degrade the purity of sound, the Premium Series features a High Rigidity Metal Double Chassis, using inner and outer steel plates. Various Inputs The SU-C700 supports a wide range of inputs, such as SPDIF, Analogue and Phono, as well as USB-DAC for connection of a PC. The digital input terminal supports coaxial 192-kHz/24-bit PCM and optical 96-kHz/24-bit. The USB DAC input terminal supports 192-kHz 32-bit PCM and 2.8-MHz/5.6-MHz DSD native playback (analogue output) and asynchronous transmission. The SU-C700 converts analogue signals to high-precision 192-kHz/24-bit PCM signals using the A/D converter. The full-digital system achieves high-purity reproduction from any content.

1.299 €

Deal

Technics SL-1210GREGK

Fusing Technics' traditional analogue and leading-edge digital technologies Launched in 2016, the SL-1200G combined Technics‘ traditional analogue technology and advanced digital technology, while redesigning parts throughout. Its outstanding performance literally rocked the hi-fi market and redefined the reference for direct-drive turntables. Parts that were inherited from the SL-1200G were newly developed for the SL-1210GR, beginning with the coreless direct-drive motor and precise motor control technology that eliminated the cogging that originated from rotation irregularity, and including a low-vibration, high-rigidity platter and high-sensitivity tonearm. By these measures, the level of performance clearly outperforms the usual standards of its class. The SL-1210GR invites more audio enthusiasts to enjoy music with the rich, robust sound of analogue records. Coreless Direct-Drive Motor Achieving Stable Rotation In 1970, Technics commercialized the world‘s first direct-drive turntable, and the system took the world by storm. Unlike belt-drive and other systems, direct-drive systems rotate the motor at low speed and directly drive the platter, thus providing numerous advantages, such as the almost complete absence of degradation in S/N ratio due to motor vibration and deceleration mechanisms, as well as high reliability over a long period time because of not requiring parts replacement. And in 2016, Technics developed the twin-rotor, surface-facing, coreless direct-drive motor with rotor magnets placed on both sides, thereby eliminating the rotation irregularity of the motor, referred to as "cogging," which was a unique issue for direct-drive systems. This motor was adopted for the SL-1200G, which once again drew a significant response in the hi-fi market. The SL-1210GR inherits the same design philosophy with the new development of a single-rotor, surface-facing, coreless direct-drive motor, resulting in the elimination of cogging. High-precision Motor Control for Ideal Rotation Conditions The rotation control, which verifies and corrects the precision of the motor, uses the latest motor control technology cultivated in the development of Blu-ray disc devices, just as that used by the SL-1200G. Sine waves stored in ROM are used for the control waveforms at constant speed, and this achieves smoother and more stable rotation compared with using the simple sine wave generation with an external coil as in the conventional SL-1200MK5. In addition, the electrical circuitry has had tuning performed so that the newly developed motor of the SL-1210GR achieves maximum performance. The starting torque achieves 2.2 kg x cm with only a single rotor. The same startup time of 0.7 s (at 33 1/3 rpm) as the SL-1200G has been achieved. Pursuing Rigidity and Vibration Damping Characteristics The platter achieves high rigidity and vibration damping characteristics by using a two-layer construction with deadening rubber applied to the entire rear surface of the aluminium die-cast to eliminate the unnecessary resonance that is otherwise relayed to the record, thereby producing clear sound. To increase the inertial mass and reduce vibration, the shape of the aluminium die-cast portion was optimized by simulation. At 2.5 kg (including the rubber mat), the SL-1210GR platter is 0.8 kg heavier than that of the previous SL-1200MK5. Also, the back surface of the platter has strengthening ribs added to improve rigidity. Increasing the surface area of contact with the deadening rubber achieves damping characteristics that are more than twice those of the SL-1200MK5. Tonearm Achieving High Initial-Motion Sensitivity The tonearm tracks the rotation of the record and enables reading with high precision, and the tonearm inherited by Technics is the traditionally used static-balance universal S-shaped tonearm, employing an aluminium pipe with excellent light weight and rigidity for the material of the tonearm pipe. With its gimbal suspension construction, the tonearm bearing section uses a cut-processed housing that employs high-precision bearings, as in the SL-1200G. The high initial-motion sensitivity of 5 mg or less is achieved through manual assembly and adjustment by skilled Japanese artisans. This enables the grooves etched into the records to be accurately traced. In addition, one type of auxiliary weight comes included, and the cartridge can be swapped with a variety of other cartridges to match the music genre or feeling. (Applicable cartridge weight when using the supplied auxiliary weight: 10 - 16.4 g (not including the supplied head shell)) High-quality Terminals for Both Sound and Appearance The turntable uses gold-plated phono terminals for detachable cables, and so a wide variety of cables can be selected. Also, the use of metal shielding construction inside the case reduces the effects of external noise. High-rigidity Body and High-damping Silicon Insulators for Smooth Sound and Isolation from Various Vibrations The SL-1210GR ensures high rigidity by using a body with a two-layered construction solidly unifying the BMC and the aluminium die-cast chassis. For the insulators supporting the body, as with the SL-1200G, the SL-1210GR uses special silicon rubber that ensures both high vibration damping characteristics and long-term reliability. Vibration in the horizontal direction is absorbed by reinforcement with cylindrical tubes using microcell polymers. While inheriting the technology of the SL-1200G, the insulators have had tuning performed specifically for the SL-1210GR. Also, the installation section of the insulators is equipped with a vertical adjustment mechanism using screws. This eliminates the rattle that occurs when the turntable is installed in a rack or the like, and prevents unwanted vibration. In addition, exact horizontal adjustment of the platter and record surface reduces rotation irregularity due to slanting, thereby enabling more stable record playing.

1.499 €

Warm Audio WA-47F

Large-Diaphragm Condenser Microphone.A Secret Weapon Of Pro StudiosThe WA-47F is a faithful recreation of a high-SPL, low-noise classic celebrated as a 'secret weapon' across world-class studios. The original '47-style FET was released in 1969 and gained massive popularity inside recording studios for its ability to handle fast transients with exceptional detail. Compared to popular tube microphones, the WA-47F has a more pristine top end and a tighter, more controllable bass response. Famous artists such as Dave Grohl and Daft Punk used the original 47FET on kick drums, inspiring generations of drummers and engineers. For vocals, legends like David Lee Roth and Michael Stipe used the original to create some of the most beloved music of all time.The WA-47F shares the same sonic profile as that original microphone, making the WA-47F a studio workhorse that will quickly become a go-to mic in your locker.Full Volume. Powerful Detail. No CompromiseLike all Warm Audio microphones, the WA-47F is a no-nonsense studio tool with premium components and elite build quality. Like the originals, the WA-47F takes the sound of the WA-47 tube mic and swaps the valve for solid-state FETs, meaning there’s no compromise between capturing rich midrange, detailed bass, and handling very loud sources. At its core, the WA-47F uses a premium reproduction of the vintage K47-style capsule found in the original microphone for ultra-wide frequency response and detail. The WA-47F uses a single backplate, cardioid-only version of the same capsule used in our award-winning WA-47 tube microphone.The capsule is joined by a custom TAB-Funkenwerk USA Output Transformer that drives the punchy, powerful sound captured by this capsule. The WA-47F pairs premium Fairchild FETs with polystyrene & Wima capacitors and the AMI output transformer, giving the WA-47F the ideal frequency response to capture extra detail and depth. The -10dB pad gives you extra headroom for those loud sources that you need to keep loud. When you need to eliminate unwanted bass frequencies on sources like lead vocals or electric guitar cabs, engage the included 140 Hz low-cut filter to save yourself from unnecessary post-EQ. Our meticulous R&D process allowed us to dial in a true-to-original output level and frequency response that matches the performance expectations of world-class audio engineers and recording facilities.Studio WorkhorseLike the original, the WA-47F’s custom-tuned frequency response captures huge kick drum sounds, punchy guitar & bass cabs, and adds a pristine edge to solo vocals that need to stand out.Kick DrumIn addition to a dynamic mic on the inside of the kick, aimed right at the beater, many engineers choose to add a 47FET-style microphone to the outside of the kick drum on the front head. The dynamic mic on the beater tends to capture the “snap” of the kick, while the WA-47F on the outside will get the “thump” from the drum. The air pressure “boom” of the resonant kick drum head is a huge sound easily missed by the dynamic mic. Adding a WA-47F to your kick will have a huge spatial effect on the sound, making tracks feel more alive and less robotic.VocalsThe original mic was chosen to capture some very famous vocals including Bon Scott (AC/DC), David Lee Roth (Van Halen), and REM’s Michael Stipe. Like the original, the WA-47F delivers powerful, detailed vocals ranging from screaming hair metal all the way to soft falsettos over iconic indie rock.Guitar & Bass CabinetsThe original is also a favorite inside studios for tracking guitar and bass cabinets - especially for percussive, loud guitar parts like you might find on an AC/DC record. The openness of the condenser capsule and the ability for the circuit to handle higher-than-normal SPLs means that you can track guitars LOUD without compromising detail. For those about to rock - you'll notice a difference.WA-47-B-50v CapsuleThe WA-47-B-50v capsule is a true reproduction of the single-backplate K47-style capsule found in the original 47Fet mic. This capsule captures incredible detail across the 20Hz-19kHz frequency response. With a unique gradual climb in the mids and slight scoop in the high end, the capsule inside the WA-47F will quickly make this a favorite mic for any source that demands critical detail and pleasing high end at louder volumes.AMI USA-Made Output TransformerThe history of TAB-Funkenwerk (AMI) transformers goes all the way back to the founding of the most sought-after German analog audio innovations. The TAB (AMI) transformer in the WA-47F is American-made and built to exacting standards as designed by Oliver Archut. The sweet sonic character of the WA-47F would not be possible without the amazing, historically-correct transformer supplied by TAB-Funkenwerk.Fairchild Transistors & Premium CapacitorsThe WA-47F uses premium Fairchild FETs - the same component found in the most exacting and expensive reissues. The polystyrene and premium WIMA capacitors in the WA-47F provide the excellent signal conversion that this circuit demands.Authentic Appearance & Elite Build QualityThe WA-47F is encased in an ultra-durable nickel-plated brass body with an updated headbasket shape adding additional space around the capsule. Every single WA-47F is meticulously hand-inspected at Warm HQ in Austin,TX by real musicians and engineers with a passion for superior sound.

865 €

New

Warm Audio WA-CX12

Coveted & Rare. Until Now.The WA-CX12 is a faithful recreation of the most natural and balanced tube mic of all time, lauded for its organic tone and pleasing top end. The original AKG C12 was produced in Austria from 1953 - 1963 and is the definitive version of the 12-style mic. The WA-CX12 sound profile and circuit design is inspired by the original production run of only 2500 mics, which are highly coveted for their ability to capture the natural beauty of vocal performances, room sounds, and other far miking techniques. The list of famous recording artists who have never used a 12-style microphone is likely shorter than the list of those who have. Some of the most notable artists to create music with the original includeThe Beatles, Lupe Fiasco, Tom Petty, Michael Jackson, Alanis Morissette, and Taylor Swift, just to name a few. The WA-CX12 cuts no corners in achieving the highly coveted open, airy, and natural sound profile used over and over again by some of the world’s most recognized engineers and artists.No-Compromise ComponentsThe WA-CX12 is a professional large-diaphragm tube microphone with premium components, elite build quality, and is hand-inspected in Austin, Texas. The circuit design of the WA-CX12 is faithful to the original production run from 1953-1963, and serves as the basis for the historically accurate sound profile. Like the original, the WA-CX12 tone is mostly flat until a slight dip at 2kHz with a gradual boost between 5-10kHz. At the beginning of the chain, the CX12 has an edge-terminated, all-brass CK12-style capsule, that stays true to the frequency response of the original-run 12-style microphones.This capsule allows the WA-CX12 to have 9 polar patterns with the typical cardioid, omni, and figure-8, in addition to 6 intermediate patterns. . Moving down from the capsule, the WA-CX12 uses a premium 12AY7 vacuum tube for added warmth. At the end of the circuit, the WA-CX12 uses a custom TAB-Funkenwerk (AMI) USA Output Transformer, which gives the WA-CX12 a very full, wide, and open sound, getting the most out of the capsule and additional circuit components. The WA-CX12 has premium capacitors throughout, and a no-solder mask board for the lowest noise possible. As with all Warm Audio products, we focus heavily on quality components to ensure we release the best sounding product possible.True To Legacy, True To SoundThe WA-CX12 sound profile is known for capturing the real sound of a performance. Designed to provide clarity in the midrange and smooth out any high end harshness, the WA-CX12 delivers professional solo vocals, intricate piano performances, and epic, natural room sounds.VocalsThe gently tuned 5-10kHz boost of the WA-CX12 accentuates and smoothes out the upper register in many vocal performances.PianoOne of the more popular studio uses for the original 12-style microphone is as a stereo pair on grand piano. Because of the mic’s relatively flat frequency at 0dB until the top-end boost kicks in, the WA-CX12 adds just the right amount of pristine high end to a piano performance.Room SoundsWhether it’s room reflections, splashy cymbals, or guitar & bass cabinets - mixing in a distant WA-CX12 can bring a natural “live” sound to professional recordings.Premium Components - Elite Build Quality - Superior SoundWA-12-B-60V CEK12-Style CapsuleThe WA-12-B-60V CK12-style capsule accurately matches the frequency response of the original capsule found in vintage C12 mics. This capsule captures incredible detail across the 30Hz-20kHz frequency response. With a remarkably flat response until the top-end boost starts to hit around 3k, the capsule inside the WA-CX12 will help you capture natural sounds with some added top-end smoothness before the pleasant 19kHz rolloff.AMI USA-MADE Output TransformerThe history of TAB-Funkenwerk (AMI) transformers goes all the way back to the founding of the most sought-after German analog audio innovations. The TAB (AMI) transformer in the WA-CX12 is American-made with large-core German laminations and built to exacting standards as designed by Oliver Archut. The custom transformer drives the full natural sound captured by the capsule delivering that renowned Austrian sound.Premium Tubes, Capacitors, & BoardsThe WA-CX12 uses a premium 12AY7 vacuum tube that adds warmth and depth to the microphone’s signal. Like all Warm Audio products, we use premium capacitors in the circuit for ideal signal transfer. The PCB board in the WA-CX12 does not have solder masks which allows for the lowest noise floor possible, preventing crosstalk from added capacitance.Authentic Appearance, Elite Build Quality, Premium AccessoriesThe WA-CX12 is encased in an ultra-durable nickel-plated brass body. Every WA-CX12 comes with a custom tweed carrying case housing the mic, wood mic case, premium Gotham 7-pin cable, IEC cable, shockmount, and external power supply. Every WA-CX12 is meticulously hand-inspected at Warm HQ in Austin,TX by real musicians and engineers with a passion for superior sound.

1.154 €

New

Presonus Eris E5 BT

Our most powerful media reference monitors. If you’re interested in the best music and media listening experience PreSonus can provide, look no further than Eris® E5 BT. With 50 watts of Class-D power for each speaker, they offer all the volume you want without ever sacrificing tonal balance or sonic clarity. Add Bluetooth 5.0 wireless technology and both balanced and unbalanced inputs, and you’ve got a remarkably versatile set of speakers, great for both music fans and creators—and everyone in-between.

235 €

New

Focal Utopia Headphones 2022

Hi-fi open-back headphones for the home. Experience sensational listening quality at home with Utopia, the exceptional headphones made in France by Focal, and the fruit of over 40 years of sound innovation. Unveiled in 2016, it returns in 2022 with a reworked design and improvements to the sound for even more music-inspired emotion.

4.950 €

New

Motu M4

A High-quality Audio Interface That Won’t Break the Bank Looking for a high-quality audio interface that won’t break the bank? The MOTU M4 fits that description to a T. This 4-in/4-out USB-C audio interface includes ESS Sabre32 Ultra DAC technology for top-shelf sound, along with optimized drivers that yield impressive low-latency performance. Two great-sounding mic preamps include individual gain adjustment and phantom power, while 1-touch hardware monitoring ensures smooth tracking. You’ll also benefit from convenient front-panel metering, by way of the M4’s full-color LCD screen. Podcasters will appreciate the built-in loopback functionality, which includes a mix knob for balancing your live input with your computer’s playback. Bus-powered for the ultimate in portability, the MOTU M4 packs a lot of performance into a compact, high-powered audio interface. Best-in-class D/A, low latency, and ample I/O Sweetwater and MOTU have enjoyed a long-standing relationship, due to MOTU's products offering our customers superb sound and solid performance. The M4 follows suit, packing top-notch sound, impressively low latency, and ample I/O into a single-rack enclosure. Renowned ESS Sabre32 Ultra DAC technology delivers 120dB of dynamic range, ensuring that the M4's analog audio quality can hang with the most impressive gear on the market. Optimized drivers yield round-trip latency as low as 2.5ms at 24-bit/96kHz with a 32 sample buffer. The M4 includes all of the essential connections, including two mic preamps, four DC-coupled analog outputs, and an ESS-driven stereo headphone output. MIDI I/O is also included. Loopback functionality makes live internet streaming easy If you do live streaming or podcasting, you’ll appreciate the MOTU M4’s loopback functionality. Loopback blends your mic or other input signals with the output from your computer, then sends the blended signal back to your computer. This enables you to record your computer’s output, along with the inputted material. The M4 also includes a mix knob for balancing your live input with your computer’s playback. Hardware monitoring offers zero-latency operation Latency can really take the mojo out of a performance — it’s a jarring sensation. That’s why the M4 includes 1-touch hardware monitoring. This feature enables all of the interface’s analog inputs to be routed directly to its analog outputs, resulting in zero-latency operation. This means that there is no delay between what you play and/or sing and what you hear in your headphones. The M4’s inputs can also be recorded simultaneously, allowing you to monitor with zero latency while tracking — a must for achieving a natural-sounding performance. MOTU M4 USB-C Audio Interface Features: 4-in/4-out USB-C audio interface ESS Sabre32 Ultra DAC technology delivers 120dB of dynamic range and superb audio quality Optimized drivers yield round-trip latency as low as 2.5ms at 24-bit/96kHz with a 32 sample buffer Full-color LCD screen supplies convenient front-panel metering 2 great-sounding microphone preamps with individual gain and phantom power 1-touch hardware monitoring on all inputs Loopback for live streaming and podcasting Mix knob for balancing live input with your computer’s playback USB bus-powered for the ultimate in portability 6+GB of free loops, samples, and 1-shots from industry-leading libraries Tech Specs Computer Connectivity:USB 2.0 Form Factor:Desktop Simultaneous I/O:4 x 4 Number of Preamps:2 Phantom Power:Yes A/D Resolution:Up to 24-bit/192kHz Analog Inputs:2 x XLR-1/4" TRS (mic/line/Hi-Z), 2 x 1/4" (line) Analog Outputs:2 x 1/4" TRS (DC coupled, monitor), 2 x 1/4" TRS (DC coupled, line), 1 x Dual RCA Stereo (monitor), 1 x Dual RCA Stereo (line) Headphones:1 x 1/4" MIDI I/O:In/Out/USB USB:1 x USB-C Software:MOTU Performer Lite, Ableton Live 10 Lite, Bundled Loops/Sounds OS Requirements - Mac:OS X 10.11 or later OS Requirements - PC:Windows 7 SP1 or later Bus Powered:Yes Power Supply:USB bus powered Height:1.75" Width:8.25" Depth:4.25" Weight:1.55 lbs. Manufacturer Part Number:3140

259 €

New

Focal Twin 6

Made in France the new Twin6 is a 2.5-way monitor offering unrivaled transparency, definition level, dynamics, and soundstage precision. It's Focus Mode uses a two-way configuration, preserving the sweet spot when mixing, saving space on the console and simplifying cabling and monitor changes.

1.999 €

New

Focal Solo 6

Made in France the new Solo6 is a 2-way monitor offering unrivalled transparency, definition control, dynamics and soundstage precision. Thanks to its full-range Focus Mode, Solo6 forms two monitors in one, preserving the sweet spot during the mix, saving space on the console and simplifying cabling and monitor changes.

1.328 €

New

Focal Celestee Headphones

Celestee combines modern design, luxurious finishes and impressive sound performance. Their exclusive Focal speaker drivers guarantee excellent dynamics and high precision sound. The earcups have undergone acoustic treatment to restrict resonance and achieve uncompromising audio quality: the sound is clean, precise and with good bass extension.

995 €

New

Naim Uniti Atom Headphones Edition

The Uniti Atom Headphone Edition can transform any space into your own audio cocoon. Where typical headphone amplifiers demand tethering to a computer the Uniti Atom Headphone Edition has all the brains – and Naim’s exclusive streaming platform.

3.290 €

New

Focal Aria K2 906 (Pair)

2-WAY BOOKSHELF LOUDSPEAKER Aria K2 906 is a compact bookshelf loudspeaker with a premium sound.The iconic K2 Power cone in its two mid-bass speaker drivers produces a sound that is precise, dynamic and with high power handling. The TNF tweeter delivers silky treble whilst the surrounding plate with waveguide improves the sound's horizontal directionality for a better sound image.Aria K2 906 is assuredly stylish. The side panels of the loudspeaker feature the high-end Ash Grey finish from the Utopia line for an extra dose of elegance.It is recommended for rooms from 161.46 sq ft (15m²) and a listening distance of around 8,2ft (2.5m).

1.499 €

New

Warm Audio WA-8000

The WA-8000 is a nod to a very special large diaphragm tube condenser microphone that made its way onto countless platinum recordings starting in the early 90s and continuing today. The sound of this mic has delivered hits for artists ranging from Dr. Dre, Mariah Carey, Boyz II Men and Brian McKnight to Eminem, Rihanna, Drake and more. The original stood out, boasting a natural and open top end, supremely clear midrange, and the ability to render detail in a vocal performance unlike most other mics on the planet. The WA-8000 rises to the occasion and delivers all that top end, beat by beat, at a price that will leave you hypnotized.

1.099 €

New

Focal Radiance Bentley

Focal for Bentley Radiance high-end headphones are a special edition manufactured in France in honour of the partnership between Focal, Naim Audio and the luxury car manufacturer Bentley Motors. Their teams of engineers and designers have worked together to develop these unique headphones, selecting quality materials such as full-grain leather and solid aluminium. An authentic, refined Bentley touch is added with Copper finishes and Diamond motifs.These closed-back circum-aural headphones incorporate a combination of exclusive Focal technologies, such as the Aluminium/Magnesium ‘M’-profile dome full-range speaker driver. The first few seconds of listening reveal strikingly natural sound.Radiance offers the absolute pleasure of hi-fi listening combined with unparalleled comfort and elegance. Every detail has been considered, making these headphones a collector’s item that you can use at home or take with you, wherever you go. ACCESSORIES INCLUDED     ● A 1/8" (3.5mm) stereo jack cable    ● A 1/8" (3.5mm) to 1/4" (6.35mm) jack adapter    ● An elegant carrying case     ● Special Bentley finishes    ● Black leather-effect packaging

1.299 €

New

Focal Sub One

The Focal Sub One design leverages cutting-edge materials and engineering to advance the state of the art in studio monitoring. This compact twin active subwoofer employs dual 8-inch woofers with Slatefiber cones developed and handcrafted in Focal’s Saint-Étienne, France-based facility. Powered by 200 watts of optimized Class D bi-amplification and engineered to deliver flat tonal balance and outstanding dynamic range, the Sub One is a versatile, robust subwoofer that will complement your modern production environment and provide the honest, accurate monitoring, high SPL, and deep low-end extension you need to produce world-class results.

799 €

New

Focal Sub12

Made in France in Focal’s own workshops, this new subwoofer delivers unrivalled articulation, impact and depth. Focal Sub12 is a highly articulate subwoofer offering a level of definition, dynamics and sub-bass that is unrivalled in its price bracket. Thanks to its high excursion woofer and 1000W peak amplification, the Sub12's transcription is more powerful and truer than ever.

2.150 €

New

Presonus R80 v2

You won’t miss a thing.Clarity is king—and with the R80 V2s, you’ll hear every single detail in your music: the gentle breath in every exhale, the subtle finger noise in a nylon-string classical guitar; the nuanced overtones of brass and woodwinds; and exquisite reverb tails that decay gracefully into the void. Not only will your mixes sound their absolute best on R80 V2, but you’ll also be able to hear trouble spots in your tracks with surgical clarity. If you’re mixing or mastering high-resolution audio, the R80 V2 will ensure that you’ll hear every detail captured in your recordings.Air and transient response.Driven by a dedicated 65 watt Class A/B amp, the R80 V2’s custom-designed 6.8-square-inch Air Motion Transformer (AMT) excels at accurate reproduction of the highest of high frequencies—those responsible for a sense of air, space, and dimensionality. And the AMT’s astonishingly thin (< 0.01 mm) folded Kapton® membrane allows the tweeter to move in the same instant as the voltage cycles that power it, providing nothing less than wave cycle-accurate transient reproduction.Wide with pride.The unique AMT design also allows the R80 V2 to handle 8 to 13 times the projection area of more traditional tweeter designs, while the R80 V2’s unique housing constrains this projection area to the horizontal axis. The result is a very wide sweet spot with focused vertical dispersion, —minimizing reflections off of your desk, ceiling, and floor that could otherwise introduce problematic phase and coherence issues. And because it’s less subject to room-anomaly interference, the R80 V2 studio monitor reacts predictably and sounds consistent, even if moved to different listening environments.The lowdown on the down-low.R80 V2’s woofer is eight inches of rigid, custom-woven composite that offers consistent dispersion across its frequency range for the flattest response we could design. A dedicated 75 watt Class A/B amplifier provides ample headroom and impressive distortion-free, non-fatiguing performance—even at higher volumes.The new versatility.Improving the respected R-series classics wasn’t easy, but we found a way: by giving you more control than was available on the original R80. The updated R80 V2 features analog acoustic tuning controls that will be familiar to users of our celebrated Eris® line—you get Low Cut, Mid Frequency, and High Frequency controls, as well as a three-way Acoustic Space switch that allow you to easily compensate for the sonic consequences of speaker placement against a wall or in a corner. We also added a new Class A/B amplifier to provide an even warmer and smoother overall frequency response.Studio monitor connections.Of course, you also get classic PreSonus monitor connectivity, as R80 V2 provides balanced XLR, balanced ¼-inch TRS, and unbalanced RCA line-level inputs, so you can hook them up to an audio interface, mixer, monitor controller, or almost any other line-level source.Accuracy defined.The R80 V2 studio monitor provides lifelike audio reproduction that will allow you to hear the room in your recordings. Its transparent sound and responsive transient reproduction makes it an ideal solution for anyone who is mixing high-resolution audio. The exact same AMT technology that provides the R80 V2’s natural-sounding, honest playback also ensures that potential trouble spots in your mixes won’t slip past your critical ear.

395 €

New

Presonus R65 v2

You won’t miss a thing.Clarity is king—and with the R65 V2s, you’ll hear every single detail in your music: the gentle breath in every exhale, the subtle finger noise in a nylon-string classical guitar; the nuanced overtones of brass and woodwinds; and exquisite reverb tails that decay gracefully into the void. Not only will your mixes sound their absolute best on R65 V2, but you’ll also be able to hear trouble spots in your tracks with surgical clarity. If you’re mixing or mastering high-resolution audio, the R65 V2 will ensure that you’ll hear every detail captured in your recordings.Air and transient response.Driven by a dedicated 65 watt Class A/B amp, the R65 V2’s custom-designed 6.8-square-inch Air Motion Transformer (AMT) excels at accurate reproduction of the highest of high frequencies—those responsible for a sense of air, space, and dimensionality. And the AMT’s astonishingly thin (< 0.01 mm) folded Kapton® membrane allows the tweeter to move in the same instant as the voltage cycles that power it, providing nothing less than wave cycle-accurate transient reproduction.Wide with pride.The unique AMT design also allows the R65 V2 to handle 8 to 13 times the projection area of more traditional tweeter designs, while the R65 V2’s unique housing constrains this projection area to the horizontal axis. The result is a very wide sweet spot with focused vertical dispersion, —minimizing reflections off of your desk, ceiling, and floor that could otherwise introduce problematic phase and coherence issues. And because it’s less subject to room-anomaly interference, the R65 V2 studio monitor reacts predictably and sounds consistent, even if moved to different listening environments.The lowdown on the down-low.R65 V2’s woofer is six and a half inches of rigid, custom-woven composite that offers consistent dispersion across its frequency range for the flattest response we could design. A dedicated 75 watt Class A/B amplifier provides ample headroom and impressive distortion-free, non-fatiguing performance—even at higher volumes.The new versatility.Improving the respected R-series classics wasn’t easy, but we found a way: by giving you more control than was available on the original R65. The updated R65 V2 features analog acoustic tuning controls that will be familiar to users of our celebrated Eris® line—you get Low Cut, Mid Frequency, and High Frequency controls, as well as a three-way Acoustic Space switch that allow you to easily compensate for the sonic consequences of speaker placement against a wall or in a corner. We also added a new Class A/B amplifier to provide an even warmer and smoother overall frequency response.Studio monitor connections.Of course, you also get classic PreSonus monitor connectivity, as R65 V2 provides balanced XLR, balanced ¼-inch TRS, and unbalanced RCA line-level inputs, so you can hook them up to an audio interface, mixer, monitor controller, or almost any other line-level source. Accuracy defined.The R65 V2 studio monitor provides lifelike audio reproduction that will allow you to hear the room in your recordings. Its transparent sound and responsive transient reproduction makes it an ideal solution for anyone who is mixing high-resolution audio. The exact same AMT technology that provides the R65 V2’s natural-sounding, honest playback also ensures that potential trouble spots in your mixes won’t slip past your critical ear.

277 €

New

Focal 300 ICA6

THE PERFECT HOME CINEMA COMPLEMENT300 ICA6 is an in-ceiling/in-wall loudspeaker fitted with a speaker driver angled at 35° that makes it perfectly adjustable to suit the position you are listening from. This removes any “shower effect”, for a high-quality sound experience. The angle also means that it can be positioned in several ways in the ceiling, including in corners, for fully discreet sound delivery. Using the product as a Dolby Atmos® / DTS:X loudspeaker greatly enhances the effects experienced in 3D audio, making it the perfect complement for a 300 Series Home Cinema system.300 ICA6 includes exclusive technologies that are made in France in Focal's workshops, such as the Flax cone, delivering extremely natural sound and the Aluminium/Magnesium inverted dome tweeter for silky treble. The grills delivered with the product guarantee a total discretion whilst the patented Easy Quick Install technology ensures a quick, tool-free installation.*300 ICA6 is similar in design and exactly the same size as the 100 Series products. This makes it possible to develop your system easily depending on your requirements.CREATE AN INVISIBLE SYSTEMRound or square, the grilles are magnetic making them easy to place on the loudspeakers. They are fitted with anti-vibration pads so as not to interfere with listening. Available in a white finish, the grilles have been designed to be painted and to blend in seamlessly with the interior.THE INIMITABLE FLAX CONEThe Flax cone is an exclusive Focal technology manufactured in France. It is a sandwich cone formed of an extremely high-quality flax fibre core placed between two thin sheets of glass fibre. It ticks all the boxes for a high-fidelity cone: it is lightweight for good dynamics, rigid to support the bass and dampening to deliver a neutral and natural listening experience. The sounds are strikingly real, voices are reproduced with clarity and detail. 

399 €

New

SPL MTC MK2

The MTC Mk2 gives you full control over your monitoring chain. A solid-feeling aluminum knob provides easy, intuitive volume adjustment. Three monitoring modes ensure maximum flexibility. Stereo monitoring — complete with a mono compatibility check — is the standard. You can monitor a reverse-phase version of your mix via the Ø switch. You can also audition a reverse stereo version of your mix via the LR Swap switch — a must-have for film work. What's more, by using the Mono and Ø switches in concert you can monitor the mid and side portions of your mix individually. The MTC Mk2 also includes a Dim switch, plus separate Mute switches for your speakers and headphones.

1.295 €

New