Bulk Speaker Cables
Rega Duet Speaker Cable Available to buy off the reel by the metre, please enter how many metres you require into the quantity box when ordering.Note this cable is supplied without terminations.A brand new high quality Rega designed flat, flexible speaker cable containing 250 strands per channel and totalling 4mm square cross section made from the highest grade 99.99% copper. Designed to maximise the potential of your Rega system, this cable is also a versatile solution for other systems and installs.
The BLS225 are double isolated loudspeaker cables composed of two twisted conductors in a flexible PVC outer jacket. The double isolated construction allows the cable being used in public address (100V) audio systems while the smooth and durable outer jacket offers a great installers convenience for easy installation and pulling.The cable consist of individualy isolated conductors with a section of 2 x 2.5 mm² (13 AWG) which are composed out of stranded copper clad aluminum (CCA) wires. The stranding keeps the cable flexible and easy to handle while the copper clad aluminum construction results in a electrical performance between copper and aluminum cables. It combines the advantages from two sides, such as solderability, lower weight and lower material cost than bare copper with the higher conductivity and higher strength than pure aluminum. The cable composition is made of 75% aluminum with 25% copper.
Unbending and yet bendable ...is the new SC-AQUA MARINEX SPEAKER 225 speaker cable for permanent underwater use. Originally this robust cable was intended for use in theme or amusement parks. But it also enjoys a high popularity for installations at long-term events such as Christmas markets, lake festivals or sporting events under extremely adverse conditions (e.g. equestrian events). We have added an extra stabilization to the inner wires and a tight, braided shield so that the SC-AQUA MARINEX SPEAKER 225 can equally withstand high water pressure as well as mechanical and electrical influences. Of course, the cables can also be used for live sound reinforcement applications, however, they are slightly stiffer than conventional PVC cables, yet super robust.Advantages:Sea- and freshwater resistant outer jacketTransversely watertight due to water-absorbing, pressure-compensating protective bandingHalogen-freeCold-flexible and reelableUV- and microbe-resistantShielded by a tight CU meshworkChlorine water resistantApplication:Permanent laying in a maximum water depth of 50 mDemanding outdoor installation (e.g. with long-time events)Installation and usage near the coast and in boat-buildingIn- and outdoor installation in leisure parks and water oasesUnderwater sound reinforcement in theme parks or aqua parks
DescriptionMogami W3103 is a high quality speaker cable designed to allow your audio devices and speakers to reach their full potential. Each conductor, with a cross-section of 4mm² (12AWG), is made from OFC Mogami Neglex Copper in a configuration designed to provide transparency and sound precision.
Speaker Cable Meridian Mobile SP225; 2 x 2,50 mm²; PUR Master-Blend Ø 7,80 mm; blackWhere brute force reigns in a useful manner...the sound people are at work and they will treat the cables not exactly squeamishly.No problem for our robust MERIDIAN. This cable has been designed particularly forloudspeakers and here it meets all specific technical requirements. Low-oxygen Cu wires ensure better sound quality and a longer life.Advantages:Small in diameterVery durable due to the use of special coating mixturesAffordable priceApplication:PA sound systems of all kindsFor ELA technologyCabling of HiFi systemsmobile outdoor area
Flexible speakercable on a Roll 2x2,5mm (2 wires), length: 100m, color: black
The ultra low resistance offered by the silver-plated ultra pure copper conductors of the SV150 ensures a firm grip and transient precision.This bi-wire cable allows unparalleled musical cohesion and a truly 3 dimensional soundstage with solid, believable images you can almost reach out and touch, even during the most complex musical passages.Every single micro data of the musical signal will surely reach the speaker.Price per meter. Specifications:Conductor: OFC + Silver platedConductor section: 2 x 0.1 in² / 2 x 2.5 mm²Resistance: 0.008 ΩCapacitance: 61.560 pF/m
The Nortsone Quad speaker cable is a model with a PVC sheath and four multi-stranded conductors surrounded by an aluminum strip. CL3, it resists a temperature of 80°c, delays its combustion and releases less toxic gases in the event of a fire. 99.999% OFC, it offers excellent performance with better dynamics and a more intelligible sound message. TECHNICAL FEATURES: 150 CL3 Structure: Copper 99.999% OFC - CL3 Heat resistant (80°C) Resistance: 0.01428 Ω 300 Volts: ok Capacitance: 205,170 pF/m Section: 4 x 1.5 mm2, external diameter 6 mm Length: 150m 250 CL3 Structure: Copper 99.999% OFC - CL3 Heat resistant (80°C) Resistance: 0.00873 Ω 300 Volts: ok Capacitance: 275,160 pF/m Section: 4 x 2.5 mm2, external diameter 6 mm Length: 150m
The Nortsone Quad speaker cable is a model with a PVC sheath and four multi-stranded conductors surrounded by an aluminum strip. CL3, it resists a temperature of 80°c, delays its combustion and releases less toxic gases in the event of a fire. 99.999% OFC, it offers excellent performance with better dynamics and a more intelligible sound message. TECHNICAL FEATURES: 150 CL3 Structure: Copper 99.999% OFC - CL3 Heat resistant (80°C) Resistance: 0.01428 Ω 300 Volts: ok Capacitance: 205,170 pF/m Section: 4 x 1.5 mm2, external diameter 6 mm Length: 150m 250 CL3 Structure: Copper 99.999% OFC - CL3 Heat resistant (80°C) Resistance: 0.00873 Ω 300 Volts: ok Capacitance: 275,160 pF/m Section: 4 x 2.5 mm2, external diameter 6 mm Length: 150m
The Nortsone Dual speaker cable is a model with a PVC sheath and two multi-stranded conductors surrounded by an aluminum strip. CL3, it resists a temperature of 80°c, delays its combustion and releases less toxic gases in the event of a fire. 99.999% OFC, it offers excellent performance with better dynamics and a more intelligible sound message. TECHNICAL FEATURES: 150 CL3 Structure: Copper 99.999% OFC - CL3 Heat resistant (80°C) Resistance: 0.01451 Ω 300 Volts: ok Capacitance: 273,443 pF/m Section: 2 x 1.5 mm2, external diameter 6 mm Length: 150m 250 CL3 Structure: Copper 99.999% OFC - CL3 Heat resistant (80°C) Resistance: 0.00893 Ω 300 Volts: ok Capacitance: 306,580 pF/m Section: 2 x 2.5 mm2, external diameter 7 mm Length: 150m
The Nortsone Dual speaker cable is a model with a PVC sheath and two multi-stranded conductors surrounded by an aluminum strip. CL3, it resists a temperature of 80°c, delays its combustion and releases less toxic gases in the event of a fire. 99.999% OFC, it offers excellent performance with better dynamics and a more intelligible sound message. TECHNICAL FEATURES: 150 CL3 Structure: Copper 99.999% OFC - CL3 Heat resistant (80°C) Resistance: 0.01451 Ω 300 Volts: ok Capacitance: 273,443 pF/m Section: 2 x 1.5 mm2, external diameter 6 mm Length: 150m 250 CL3 Structure: Copper 99.999% OFC - CL3 Heat resistant (80°C) Resistance: 0.00893 Ω 300 Volts: ok Capacitance: 306,580 pF/m Section: 2 x 2.5 mm2, external diameter 7 mm Length: 150m
Every link in the hi-fi chain is important. Connections between components, including those to the loudspeakers, are crucial to the performance of any audio system. NAC A5 is our multi-strand loudspeaker cable, consisting of two separated 4mm2 conductors. Its design is optimised for use with Naim Audio amplifiers and any loudspeakers by ensuring that its capacitance, inductance and resistance are entirely compatible. We strongly recommend its use, along with our right-angled, twin loudspeaker plugs, which provide a safe, convenient and very effective connection. Even their plating has been the subject of research and development work. Features Twin separated 4mm2 conductors Design and build optimised for Naim Audio amplifiers Available in black and white
The quality of speaker cables plays a major role in delivering music signal from your source to your loudspeakers. The Classic line uses ultra pure (Oxygen Free Copper 99.99%) copper in a transparent outer jacket. Polarity can easily be recognized thanks to the outer jacket geometry (round and square). Specifications: Conductor: OFC Conductor section: 2 x 0.1 in² / 2 x 4 mm² Length: 1 m Resistance: 0.008 Ω Capacitance: 55.350 pF/m
The quality of speaker cables plays a major role in delivering music signal from your source to your loudspeakers.The Classic line uses ultra pure (Oxygen Free Copper 99.99%) copper in a transparent outer jacket. Polarity can easily be recognized thanks to the outer jacket geometry (round and square). The Classic CL150 is ideal to connect small floorstanders, bookshelves and surround speakers in hi-fi or home-theatre systems for length up to 10 meters. Specifications:Conductor: OFCConductor section: 2 x 0.1 in² / 2 x 1.5 mm²Length: 1 mResistance: 0.013 ΩCapacitance: 55.530 pF/m
A specially developed high performance yet economical series of low impedance balanced microphone cables. These cables are small in size and special rubber - like PVC jacket is extremely flexible and exhibits good resistance to rough handling and abrasion. High grade insulation material is designed to minimize heat shrinkage during soldering which allows easy termination to XLR type connectors. Available in both overall and individually sheilded types.
The CLEARWATER is especially intended for use as a twin line loudspeaker cable in areas with an increased corrosion activity such as industrial, coastal and humid tropical areas. Due to its maximum corrosion protection The CLEARWATER is excellently suited for use in permanent professional, commercial and industrial distribution setups such as church sound systems and shopping mall, airport and alike music distribution systems as well as in car hi-fi applications.Both leads each consist of 98 high purity dense Silver coated high purity Matched Crystal OFC strands with an effective cross-section area of 1.97 mm² closely approaching AWG 14. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Conductor Material:High purity dense Silver coated high purity Matched Crystal OFCDesign Purpose/Application Area(s):Loudspeaker cableEff. Conductor Ø/Eq. AWG No./Strands:2x(1.97 mm² / ~AWG 14 / 98)External Diameter /-Dimensions:16.6 mm. wide; 5.0 mm. thickResistance 20 °C / 68 °F:0.9 Ohm/100 m.Capacitance:22 pF/m.Insulation / Dielectric Strength / Test Voltage:HULLIFLEX ® / 300 Vrms min.
Kimber 4PR. Price per meter.(Cp) parallel capacitance: 312.0 pF 20 kHz(Ls) series inductance: 0.654 µH 20 kHz(Rdc) dc loop resistance: 0.041 Ω(Xt) total reactance: 0.0825 Ω 20 kHzFrequency response ± 0.5 dB: dc - 100 kHz
Kimber 4VS. Price per meter.(Cp) parallel capacitance: 340.0 pF 20 kHz(Ls) series inductance: 0.596 µH 20 kHz(Rdc) dc loop resistance: 0.041 Ω(Xt) total reactance: 0.075 Ω 20 kHzFrequency response ± 0.5 dB: dc - 250 kHz
Kimber 8PR. Price per meter.(Cp) parallel capacitance: 742.0 pF 20 kHz(Ls) series inductance: 0.459 µH 20 kHz(Rdc) dc loop resistance: 0.021 Ω(Xt) total reactance: 0.057 Ω 20 kHzFrequency response ± 0.5 dB: dc - 50 kHz
The GOLDWATER is especially intended for use as a twin line loudspeaker cable in areas with an increased corrosion activity such as industrial, coastal and humid tropical areas. Due to its maximum corrosion protection The GOLDWATER is excellently suited for use in permanent professional, commercial and industrial distribution setups such as church sound systems and shopping mall, airport and alike music distribution systems as well as in car hi-fi applications.Both leads each consist of 98 high purity dense Silver coated high purity Matched Crystal OFC strands with an effective cross-section area of 1.97 mm² closely approaching AWG 14. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Conductor Material:High purity dense Silver coated high purity Matched Crystal OFCDesign Purpose/Application Area(s):Loudspeaker cableEff. Conductor Ø/Eq. AWG No./Strands:2x(1.97 mm² / ~AWG 14 / 98)External Diameter /-Dimensions:16.6 mm. wide; 5.0 mm. thickResistance 20 °C / 68 °F:0.9 Ohm/100 m.Capacitance:22 pF/m.Insulation / Dielectric Strength / Test Voltage:HULLIFLEX ® / 300 Vrms min.
The INSPIRATION HYBRID is a new product in our state of the art FUSION SERIES of audio interconnects and loudspeaker cables which incorporate our new developed highly advanced FUSION conductor material.It’s main application area is to serve as a highest quality twin lead loudspeaker cable, though it equally exels when used for bi-wiring, bi-amping.INSPIRATION HYBRID’s design incorporates a number of unique features which widen its field of application and improve performance compared to regular twin lead loudspeaker cables:The cable is equipped with a heavy shield.The signal leads are placed in a so-called star quad configuration.The cable contains a separate central ground lead which, if applicable,is intended to serve as ground connection between loudspeaker cabinet and amplifier ground.The above mentioned design features avoid possible audio signal interference caused by external electromagnetic noise radiating into your power amplifier’s signal (feedback) path, entering through the loudspeaker lines.Furthermore, when using digital (switchmode) power amplifiers, any radiation of residual noise from the loudspeaker lines is prevented.As such, these measures help to keep your system’s noise floor down, thereby allowing it to reveal more detail. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Cable Type:Screened 5 conductorConductor Material:FUSION TECHNOLOGY: amorphous Cu/Zn/Ag alloy + HYBRID: Linear Structured Carbon ® saturated layer(s)Design Purpose/Application Area(s):Highest quality loudspeaker cable / Exotic DIY interconnectEff. Conductor Ø/Eq. AWG No./Strands:Each signal lead: 1.97 mm² / ~AWG 14 / 98Ground lead: 0.56 mm² / AWG 19.6 / 7Screen: 4.45 mm² / AWG 10.7 / 252External Diameter /-Dimensions:11.5 mm.Resistance 20 °C / 68 °F:Two red or blue signal leads combined: 1.4 Ohm/100 m.Central ground lead: 3.2 Ohm/100 m.Screen: 0.45 Ohm/100 m.Capacitance:318 pF/m.Insulation / Dielectric Strength / Test Voltage:Cores: HULLIFLEX ® 4; Jacket: HULLIFLEX ® 4 / 300 Vrms min.
The main idea behind this concept is that a pure metal conductor is a wonderful collection and compilation of crystals where the inter-crystal relations are not perfectly arranged.In our The REVELATION HYBRID the bridging factor between these crystals is the thick conductive Linear Structured Carbon ® (LSC) saturated layer covering the centre conductor.Due to the special properties of this LSC saturated coating, the sonic improvements are remarkable. Especially the very fine details of a recording and the spatial information are transmitted without the slightest harshness.All metal strands used in The REVELATION HYBRID are of a very high grade Matched Crystal (MC) OFC with a thick and very dense coating of pure silver.The centre conductor is made of 294 single strands each 0.15 mm. in diameter exhibiting a total cross-section area of 5.20 mm² and a low resistance of 0.332 Ohm/100 meter.The LSC saturated layer covering the centre group is extruded under very high pressure to ensure a good bridging contact.The total diameter of this combined group is 7.50 mm.Around this core 16 helically wound conductors are applied. These 16 outer conductors are individually insulated and are standardly wired in parallel with the centre conductor, giving a single lead cable. Their being individually insulated however also allows them to be wired together as a separate signal return. (Versions wired as such and fit with matching connectors are available either as twin-lead speaker cable or as single-ended interconnect on special customer demand).Each of these 16 conductors consists of 42 strands of 0.15 mm. diameter. These 16 conductors exhibit a combined cross-section area of 11.88 mm² and a combined resistance of just 0.145 Ohm/100 meter.The core combined with these 16 conductors in parallel give The REVELATION HYBRID its very low resistance of 1 Ohm/km.The outer insulation jacket is made of red HULLIFLEX ® 3, a mechanically superb insulation material.The external diameter is 12.5 mm.*Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Cable Type:Single lead, multistrandConductor Material:HYBRID: Both centre conductor and outer groups: High purity dense Silver coated high purity Matched Crystal OFC + Linear Structured Carbon ® saturated layer(s)Design Purpose/Application Area(s):Highest quality loudspeaker cable / Exotic DIY interconnectEff. Conductor Ø/Eq. AWG No./Strands:Core: 5.20 mm².; Outer groups combined: 11.88 mm².; Total: 17.07 mm². / Total: ~AWG 5 / Core: 294; Outer 16 groups each: 42External Diameter /-Dimensions:12.5 mm.Resistance 20 °C / 68 °F:Core: 0.332 Ohm/100 m.; Outer groups combined: 0.145 Ohm/100 m.; Both parallel: 0.101 Ohm/100 m.Insulation / Dielectric Strength / Test Voltage:Jacket: HULLIFLEX ® 3 / 300 Vrms min.
The SCS - 2 for certain is the very best PTFE insulated pure metal loudspeaker line available in the world.The size is 2 gauge with 665 strands and a conductor cross-section area of 33.9 mm².Ext. diam. is: 9.70 mm.The resistance is an extremely low 0.51 Ohm/km.Each strand is made of a very high grade Matched Crystal (MC) OFC covered with a dense and very pure silver coating in an extrusion process.The SCS - 2 is available on 50 meter reels or in any specified length with beige PTFE jacket with “ van den Hul SCS - 2 ” printing in a brown colour. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Cable Type:Single wire, multistrandConductor Material:High purity dense Silver coated high purity Matched Crystal OFCDesign Purpose/Application Area(s):Loudspeaker cableEff. Conductor Ø/Eq. AWG No./Strands:33.9 mm² / AWG 2 / 665External Diameter /-Dimensions:9.70 mm.Resistance 20 °C / 68 °F:0.51 Ohm/km.Insulation / Dielectric Strength / Test Voltage:PTFE / 1000 Vrms / 3500 Vrms
The SCS - 4 comes very close to the sonic qualities of the SCS - 2. The size is 4 gauge with 133 strands and a total conductor cross-section area of 21.6 mm².The external diameter is 8.10 mm.The resistance is a remarkably low 0.80 Ohm/km.Each strand is made of a very high grade Matched Crystal (MC) OFC with a dense and very pure silver coating in an extrusion process.The jacket of the SCS - 4 is made of beige PTFE with “ van den Hul SCS - 4 ” printing in brown colour. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Cable Type:Single wire, multistrandConductor Material:High purity dense Silver coated high purity Matched Crystal OFCDesign Purpose/Application Area(s):Loudspeaker cableEff. Conductor Ø/Eq. AWG No./Strands:21.6 mm² / ~AWG 4 / 133External Diameter /-Dimensions:8.10 mm.Resistance 20 °C / 68 °F:0.80 Ohm/km.Insulation / Dielectric Strength / Test Voltage:PTFE / 1000 Vrms / 3500 Vrms
The SCS - 6 comes very close to the sonic qualities of the SCS - 4.The size is 6 gauge with 133 strands.Each strand is made of a very high grade Matched Crystal (MC) OFC with a dense and very pure silver coating in an extrusion process.The jacket of the SCS - 6 is made of beige PTFE with “ van den Hul SCS - 6 ” printing in brown.The tonal quality is extremely good. Especially its smooth high frequency reproduction is reference quality. This is the direct result of the special production methods involved. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Cable Type:Single wire, multistrandConductor Material:High purity dense Silver coated high purity Matched Crystal OFCDesign Purpose/Application Area(s):Loudspeaker cableEff. Conductor Ø/Eq. AWG No./Strands:13.5 mm² / ~AWG 6 / 133External Diameter /-Dimensions:6.35 mm.Resistance 20 °C / 68 °F:1.3 Ohm/km.Insulation / Dielectric Strength / Test Voltage:PTFE / 1000 Vrms / 3500 Vrms
The general construction is the same as with The REVELATION HYBRID:First an inner group with 308 x 0.14 mm. very high grade Matched Crystal (MC) OFC strands with a dense coating of very pure silver. The inner group exhibits a total metal cross-section area of 4.74 mm².Covering this core is a Linear Structured Carbon ® (LSC) saturated layer which bridges minor defects and captures and transforms the radiated magnetic field of the inner conductor to an audio signal again.The helically wound outer conductor structure employs the same silver coated MC OFC metal quality as found in the core and consists of 16 separate conductors, each with 19 strands of 0.11 mm. This produces a metal cross-section area of 2.89 mm². These 16 outer conductors are individually insulated and are standardly wired in parallel with the centre conductor, giving a single lead cable. Their being individually insulated however also allows them to be wired together as a separate signal return. (Versions wired as such and fit with matching connectors are available either as twin-lead speaker cable or as single-ended interconnect on special customer demand).The total metal cross-section area of The REVOLUTION HYBRID is 7.63 mm² giving the cable its very low resistance of 0.226 Ohm/100 m.The outer jacket is made of red HULLIFLEX ® 3, a mechanically superb insulation material. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Cable Type:Single lead, multistrandConductor Material:HYBRID: Both centre conductor and outer groups: High purity dense Silver coated high purity Matched Crystal OFC + Linear Structured Carbon ® saturated layer(s)Design Purpose/Application Area(s):Highest quality loudspeaker cable / Exotic DIY interconnectEff. Conductor Ø/Eq. AWG No./Strands:Core: 4.74 mm²; Outer groups combined: 2.89 mm²; Total: 7.63 mm² / Total: AWG 8.4 / Core: 308; Outer 16 groups each: 19External Diameter /-Dimensions:8.0 mm.Resistance 20 °C / 68 °F:Core: 0.364 Ohm/100 m.; Outer groups combined: 0.597 Ohm/100 m.; Both parallel: 0.226 Ohm/100 m.Insulation / Dielectric Strength / Test Voltage:Jacket: HULLIFLEX ® 3 / 300 Vrms min.
The WIND Mk II HYBRID consists of a total of 173 single non insulated strands in 5 different layers with a total cross-section area of 4.67 mm² equalling AWG 10.5.To improve the overall transmission quality even more, we have coated the total metal construction with a Linear Structured Carbon ® saturated layer.This extra item dramatically improves the sound quality.The sonic result is a very detailed signal transmission with a superb spacious character.The resistance of The WIND Mk II HYBRID is 3.7 Ohm/km. The external diameter is 6.2 mm.The peach colored jacket is made of HULLIFLEX ® 3, a very flexible and mechanically superb insulation material.Before connecting The WIND Mk II HYBRID to your equipment we advise to mildly twist both leads to keep them together. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Cable Type:Single wire, multistrandConductor Material:HYBRID: High purity dense Silver coated high purity Matched Crystal OFC + Linear Structured Carbon ® saturated layer(s)Design Purpose/Application Area(s):Highest quality level loudspeaker cable / External and internal (re)wiringEff. Conductor Ø/Eq. AWG No./Strands:4.67 mm² / AWG 10.5 / 173External Diameter /-Dimensions:6.2 mm.Resistance 20 °C / 68 °F:3.7 Ohm/km.Insulation / Dielectric Strength / Test Voltage:Jacket: HULLIFLEX ® 3 / 300 Vrms min.
This twin lead loudspeaker cable is the twin version of the CS - 12 HF. Main aim is to provide a high quality flat twin lead cable at a low price.The 2 conductors are made of 147 strands of 0.16 mm. diameter high purity Matched Crystal OFC with a very dense pure silver coating. Each conductor exhibits a cross-section area of 2.96 mm², equalling AWG 12.5.Covering the two conductors you find an extra Linear Structured Carbon ® saturated layer to improve the sonic performance and to transform the radiated magnetic field into an audio-signal again.The cable jacket is made of our HULLIFLEX ® 3, a very flexible and mechanically superb insulation material.The insulation of the plus and minus leads is different in shape with printing in the flat middle section. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Conductor Material:HYBRID: High purity dense Silver coated high purity Matched Crystal OFC + Linear Structured Carbon ® saturated layer(s)Design Purpose/Application Area(s):Loudspeaker cableEff. Conductor Ø/Eq. AWG No./Strands:2x(2.96 mm² / AWG 12.5 / 147)External Diameter /-Dimensions:16.5 mm. wide; 6.0 mm. thickResistance 20 °C / 68 °F:0.58 Ohm/100 m.Capacitance:32 pF/m.Insulation / Dielectric Strength / Test Voltage:HULLIFLEX ® 3 / 300 Vrms min.
This twin lead brown metallic coloured speaker cable is designed to provide a very high transfer quality at a moderate price.Each lead is made of 296 x 0.15 mm. Matched Crystal (MC) high purity OFC strands with a dense and very pure silver coating.Covering the two conductors an extra layer saturated with Linear Structured Carbon ® is applied to improve the sonic performance and to transform the radiated magnetic field into an audio signal again.The cable jacket is made of our HULLIFLEX ® 3, a very flexible and mechanically superb insulation material.The resistance per lead is: 0.34 Ohm/100 meter.Total metal cross-section area for each conductor is 5.23 mm², equalling AWG 10. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Cable Type:Twin conductorConductor Material:HYBRID: High purity dense Silver coated high purity Matched Crystal OFC + Linear Structured Carbon ® saturated layer(s)Design Purpose/Application Area(s):Loudspeaker cableEff. Conductor Ø/Eq. AWG No./Strands:2x(5.23 mm² / AWG 10 / 296)External Diameter /-Dimensions:21.0 mm. wide; 6.5 mm. thickResistance 20 °C / 68 °F:0.34 Ohm/100 m.Capacitance:32.5 pF/m.Insulation / Dielectric Strength / Test Voltage:HULLIFLEX ® 3 / 300 Vrms min.
The SNOWLINE is made of 2 conductor groups, each with 98 x 0.16 mm. strands. The total cross-section area per conductor is 1.97 mm²; close to AWG 14. The conductor material is a very high grade large crystal OFC with a dense pure silver coating. The resistance per lead is 0.88 Ohm/100 meter. The external dimensions are 8.5 x 3.4 mm. The white jacket is made of HULLIFLEX ® 3, a superior insulation material exhibiting a very good mechanical protection and a high chemical stability. The two conductors have different insulator shapes: one is round and the other has two edges with type printing on the flat surface: the most simple polarity finder you can think of. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Conductor Material:High purity dense Silver coated high purity OFCDesign Purpose/Application Area(s):Loudspeaker cable / Car and general hi-fi applicationsEff. Conductor Ø/Eq. AWG No./Strands:2x(1.97 mm² / ~AWG 14 / 98)External Diameter /-Dimensions:8.5 mm. wide; 3.4 mm. thickResistance 20 °C / 68 °F:0.88 Ohm/100 m.Capacitance:69 pF/m.Insulation / Dielectric Strength / Test Voltage:Jacket: HULLIFLEX ® 3 / 300 Vrms min.
The SKYLINE HYBRID is an elegant small twin conductor loudspeaker cable with outstanding qualities.Each lead combines 19 high purity Oxygen Free Copper strands with a coating containing our Linear Structured Carbon ®This combination of metal and carbon (hybrid technology) has excellent properties when it comes to resolution and neutrality, and therefore is standard applied in all of our heavier loudspeaker cables. *Price per meter,not terminated.Call/email us for termination cost. TECHNICAL SPECIFICATIONS:Conductor Material:HYBRID: High purity OFC + Linear Structured Carbon ®saturated layer(s)Design Purpose/Application Area(s):Loudspeaker cableEff. Conductor Ø/Eq. AWG No./Strands:2x(2.04 mm² / ~AWG 14 / 19)External Diameter /-Dimensions:8.5 mm. wide; 3.4 mm. thickResistance 20 °C / 68 °F:0.84 Ohm/100 m.Capacitance:46 pF/m.Insulation / Dielectric Strength / Test Voltage:Jacket: HULLIFLEX ® 3 / 300 Vrms min.
The quality of speaker cables plays a major role in delivering music signal from your source to your loudspeakers. The Classic line uses ultra pure (Oxygen Free Copper 99.99%) copper in a black outer jacket. Polarity can easily be recognized thanks to the outer jacket geometry (round and square). The Classic B150 is ideal to connect small floorstanders, bookshelves and surround speakers in hi-fi or home-theatre systems for length up to 10 meters.Price per meter Specifications:Conductor: OFCResistance: 0.013 ΩCapacitance: 60.270 pF/m
The very low linear resistance of the silver-plated OFC copper conductors ensures even more analytical listening. Its construction reduces all online losses to barely measurable levels. The result is a chiselled listening experience where each micro information is restored to the speakers and a three-dimensional sound image, with almost palpable sensations, even in the most complex musical passages. Silver NorStone cables challenge what we thought we could expect from a cable of this price.DESIGNShape: Square section for - / Round section for + Finish: GlossyMarking: Indication on the remaining length
The quality of speaker cables plays a major role in delivering music signal from your source to your loudspeakers. The Classic line uses ultra pure (Oxygen Free Copper 99.99%) copper in a transparent outer jacket. Polarity can easily be recognized thanks to the outer jacket geometry (round and square). The Classic CL150 is ideal to connect small floorstanders, bookshelves and surround speakers in hi-fi or home-theatre systems for length up to 10 meters.Price per meter. Specifications: Conductor: OFCConductor section: 2 x 0.1 in² / 2 x 1.5 mm²Resistance: 0.013 ΩCapacitance: 60.270 pF/m
The quality of speaker cables plays a major role in delivering music signal from your source to your loudspeakers.The Classic line uses ultra pure (Oxygen Free Copper 99.99%) copper in a black outer jacket.Polarity can easily be recognized thanks to the outer jacket geometry (round and square)..Price per meter Specifications:Conductor: OFCResistance: 0.008 ΩCapacitance: 60.270 pF/m
The quality of speaker cables plays a major role in delivering music signal from your source to your loudspeakers.The Classic line uses ultra pure (Oxygen Free Copper 99.99%) copper in a transparent outer jacket. Polarity can easily be recognized thanks to the outer jacket geometry (round and square). Specifications:Conductor: OFCConductor section: 2 x 0.1 in² / 2 x 2.5 mm²Length: 1 mResistance: 0.008 ΩCapacitance: 55.350 pF/m
The quality of speaker cables plays a major role in delivering music signal from your source to your loudspeakers. The Classic line uses ultra pure (Oxygen Free Copper 99.99%) copper in a transparent outer jacket. Polarity can easily be recognized thanks to the outer jacket geometry (round and square). Specifications:Conductor: OFCConductor section: 2 x 0.1 in² / 2 x 2.5 mm²Length: 1 mResistance: 0.008 ΩCapacitance: 62.890 pF/m