go to top icon

Mini Jack - RCA Cables

Filters
32  Products

With Oxygen-Free Copper conductors in Wireworld’s unique DNA Helix cable design, Pulse Nano cable provides superior imaging and expressive dynamics, while the COMPOSILEX 2 insulation improves focus and clarity. An amazing, cost-effective upgrade for your portable devices. Technical Specifications: DESIGN: DNA Helix SIGNAL CONDUCTORS: Qty: 2 (8 strands)    Gauge: 27AWG  |  0.1 sq. mm CONDUCTOR MATERIAL: Oxygen-Free Copper INSULATION: COMPOSILEX 2 PLUG CONTACTS: 24K Gold-plated NOTE: PUN (Mini to 2 RCAs)  PUM (Mini to Mini)

69 €
36 Instalments 2,38€ / month
Upon Order

With Oxygen-Free Copper conductors in Wireworld’s unique DNA Helix cable design, Pulse Nano cable provides superior imaging and expressive dynamics, while the COMPOSILEX 2 insulation improves focus and clarity. An amazing, cost-effective upgrade for your portable devices. Technical Specifications: DESIGN: DNA Helix SIGNAL CONDUCTORS: Qty: 2 (8 strands)    Gauge: 27AWG  |  0.1 sq. mm CONDUCTOR MATERIAL: Oxygen-Free Copper INSULATION: COMPOSILEX 2 PLUG CONTACTS: 24K Gold-plated NOTE: PUN (Mini to 2 RCAs)  PUM (Mini to Mini)

59 €
36 Instalments 2,04€ / month
Upon Order

With Oxygen-Free Copper conductors in Wireworld’s unique DNA Helix cable design, Pulse Nano cable provides superior imaging and expressive dynamics, while the COMPOSILEX 2 insulation improves focus and clarity. An amazing, cost-effective upgrade for your portable devices. Technical Specifications: DESIGN: DNA Helix SIGNAL CONDUCTORS: Qty: 2 (8 strands)    Gauge: 27AWG  |  0.1 sq. mm CONDUCTOR MATERIAL: Oxygen-Free Copper INSULATION: COMPOSILEX 2 PLUG CONTACTS: 24K Gold-plated NOTE: PUN (Mini to 2 RCAs)  PUM (Mini to Mini)

55 €
36 Instalments 1,90€ / month
Upon Order

With Oxygen-Free Copper conductors in Wireworld’s unique DNA Helix cable design, Pulse Nano cable provides superior imaging and expressive dynamics, while the COMPOSILEX 2 insulation improves focus and clarity. An amazing, cost-effective upgrade for your portable devices. Technical Specifications: DESIGN: DNA Helix SIGNAL CONDUCTORS: Qty: 2 (8 strands)    Gauge: 27AWG  |  0.1 sq. mm CONDUCTOR MATERIAL: Oxygen-Free Copper INSULATION: COMPOSILEX 2 PLUG CONTACTS: 24K Gold-plated NOTE: PUN (Mini to 2 RCAs)  PUM (Mini to Mini)

45 €
36 Instalments 1,55€ / month
Upon Order

Analog-Audio Interconnect Cable named after the Tower Bridge in London that was completed in 1894. In all Bridges & Falls, you'll find better metals and more sophisticated technologies including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System at lower prices than ever before. Note: All cables in our Bridges & Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today¡¯s connections, including 3.5mm (male or female), DIN, and RCA.Do keep in mind, however, that, by necessity, the plugs on Bridges & Falls cables are fairly close together. If the L and R inputs of your components are more than 3¡å (7.6cm) apart, please consider models from our Rivers or Elements Series. Features :ASYMMETRICAL DOUBLE-BALANCED GEOMETRYPurpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.SOLID LONG-GRAIN COPPER (LGC) CONDUCTORSLong-Grain Copper (LGC) has fewer impurities and fewer internal grain junctions, reducing distortion and digital timing errors.COLD-WELDED, GOLD-PLATED TERMINATIONSThis plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.METAL-LAYER NOISE-DISSIPATION SYSTEMIt's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDS "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.FOAMED-POLYETHYLENE INSULATIONAny solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

41 ,95 €
36 Instalments 1,45€ / month
Upon Order

  Unique SINOX Flexi Plug DesignAllows both Cable and Plug to flex to required position Super Slim 3.5mm Jacks Allow usage with any generation iPhone,iPod, iMac 24K Gold Plated Connectors Ensures plugs do not oxidise 99.96% High Purity OFC Copper Clearer Sound and purer signal transmission

19 €
36 Instalments 0,66€ / month
Upon Order

  Unique SINOX Flexi Plug DesignAllows both Cable and Plug to flex to required position Super Slim 3.5mm Jacks Allow usage with any generation iPhone,iPod, iMac 24K Gold Plated Connectors Ensures plugs do not oxidise 99.96% High Purity OFC Copper Clearer Sound and purer signal transmission

20 €
36 Instalments 0,69€ / month
In Stock

  Unique SINOX Flexi Plug DesignAllows both Cable and Plug to flex to required position Super Slim 3.5mm Jacks Allow usage with any generation iPhone,iPod, iMac 24K Gold Plated Connectors Ensures plugs do not oxidise 99.96% High Purity OFC Copper Clearer Sound and purer signal transmission

20 €
36 Instalments 0,69€ / month
Upon Order

  Unique SINOX Flexi Plug DesignAllows both Cable and Plug to flex to required position Super Slim 3.5mm Jacks Allow usage with any generation iPhone,iPod, iMac 24K Gold Plated Connectors Ensures plugs do not oxidise 99.96% High Purity OFC Copper Clearer Sound and purer signal transmission

13 €
36 Instalments 0,45€ / month
Upon Order

  Unique SINOX Flexi Plug DesignAllows both Cable and Plug to flex to required position Super Slim 3.5mm Jacks Allow usage with any generation iPhone,iPod, iMac 24K Gold Plated Connectors Ensures plugs do not oxidise 99.96% High Purity OFC Copper Clearer Sound and purer signal transmission

10 €
36 Instalments 0,35€ / month
In Stock

  Unique SINOX Flexi Plug DesignAllows both Cable and Plug to flex to required position Super Slim 3.5mm Jacks Allow usage with any generation iPhone,iPod, iMac 24K Gold Plated Connectors Ensures plugs do not oxidise 99.96% High Purity OFC Copper Clearer Sound and purer signal transmission

7 €
36 Instalments 0,24€ / month
In Stock

  Unique SINOX Flexi Plug DesignAllows both Cable and Plug to flex to required position Super Slim 3.5mm Jacks Allow usage with any generation iPhone,iPod, iMac 24K Gold Plated Connectors Ensures plugs do not oxidise 99.96% High Purity OFC Copper Clearer Sound and purer signal transmission

5 €
36 Instalments 0,17€ / month
Upon Order

Analog-Audio Interconnect Cable named after the Tower Bridge in London that was completed in 1894. In all Bridges & Falls, you'll find better metals and more sophisticated technologies including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System at lower prices than ever before. Note: All cables in our Bridges & Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today¡¯s connections, including 3.5mm (male or female), DIN, and RCA.Do keep in mind, however, that, by necessity, the plugs on Bridges & Falls cables are fairly close together. If the L and R inputs of your components are more than 3¡å (7.6cm) apart, please consider models from our Rivers or Elements Series. Features :ASYMMETRICAL DOUBLE-BALANCED GEOMETRYPurpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.SOLID LONG-GRAIN COPPER (LGC) CONDUCTORSLong-Grain Copper (LGC) has fewer impurities and fewer internal grain junctions, reducing distortion and digital timing errors.COLD-WELDED, GOLD-PLATED TERMINATIONSThis plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.METAL-LAYER NOISE-DISSIPATION SYSTEMIt's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDS "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.FOAMED-POLYETHYLENE INSULATIONAny solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

32 €
36 Instalments 1,10€ / month
Upon Order

Analog-Audio Interconnect Cable named after the Tower Bridge in London that was completed in 1894. In all Bridges & Falls, you'll find better metals and more sophisticated technologies including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System at lower prices than ever before. Note: All cables in our Bridges & Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today¡¯s connections, including 3.5mm (male or female), DIN, and RCA.Do keep in mind, however, that, by necessity, the plugs on Bridges & Falls cables are fairly close together. If the L and R inputs of your components are more than 3¡å (7.6cm) apart, please consider models from our Rivers or Elements Series. Features :ASYMMETRICAL DOUBLE-BALANCED GEOMETRYPurpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.SOLID LONG-GRAIN COPPER (LGC) CONDUCTORSLong-Grain Copper (LGC) has fewer impurities and fewer internal grain junctions, reducing distortion and digital timing errors.COLD-WELDED, GOLD-PLATED TERMINATIONSThis plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.METAL-LAYER NOISE-DISSIPATION SYSTEMIt's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDS "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.FOAMED-POLYETHYLENE INSULATIONAny solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

35 €
36 Instalments 1,21€ / month
Upon Order

Analog-Audio Interconnect Cable named after the Tower Bridge in London that was completed in 1894. In all Bridges & Falls, you'll find better metals and more sophisticated technologies including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System at lower prices than ever before. Note: All cables in our Bridges & Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today¡¯s connections, including 3.5mm (male or female), DIN, and RCA.Do keep in mind, however, that, by necessity, the plugs on Bridges & Falls cables are fairly close together. If the L and R inputs of your components are more than 3¡å (7.6cm) apart, please consider models from our Rivers or Elements Series. Features :ASYMMETRICAL DOUBLE-BALANCED GEOMETRYPurpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.SOLID LONG-GRAIN COPPER (LGC) CONDUCTORSLong-Grain Copper (LGC) has fewer impurities and fewer internal grain junctions, reducing distortion and digital timing errors.COLD-WELDED, GOLD-PLATED TERMINATIONSThis plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.METAL-LAYER NOISE-DISSIPATION SYSTEMIt's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDS "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.FOAMED-POLYETHYLENE INSULATIONAny solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

37 €
36 Instalments 1,28€ / month
Upon Order

Analog-Audio Interconnect Cable named after the Tower Bridge in London that was completed in 1894. In all Bridges & Falls, you'll find better metals and more sophisticated technologies including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System at lower prices than ever before. Note: All cables in our Bridges & Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today¡¯s connections, including 3.5mm (male or female), DIN, and RCA.Do keep in mind, however, that, by necessity, the plugs on Bridges & Falls cables are fairly close together. If the L and R inputs of your components are more than 3¡å (7.6cm) apart, please consider models from our Rivers or Elements Series. Features :ASYMMETRICAL DOUBLE-BALANCED GEOMETRYPurpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.SOLID LONG-GRAIN COPPER (LGC) CONDUCTORSLong-Grain Copper (LGC) has fewer impurities and fewer internal grain junctions, reducing distortion and digital timing errors.COLD-WELDED, GOLD-PLATED TERMINATIONSThis plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.METAL-LAYER NOISE-DISSIPATION SYSTEMIt's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDS "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.FOAMED-POLYETHYLENE INSULATIONAny solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

39 ,95 €
36 Instalments 1,38€ / month
Upon Order

Analog-Audio Interconnect Cable named after the Evergreen Bridge that connects Seattle, Washington (USA) to the Bellevue area across Lake Washington.In all Bridges & Falls, you’ll find better metals and more sophisticated technologies — including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System — at lower prices than ever before. Note: All cables in our Bridges & Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors.  This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today’s connections, including 3.5mm (male or female), DIN, and RCA. Do keep in mind, however, that, by necessity, the plugs on Bridges & Falls cables are fairly close together. If the L and R inputs of your components are more than 3″ (7.6cm) apart, please consider models from our Rivers or Elements Series.   Features : ASYMMETRICAL DOUBLE-BALANCED GEOMETRY Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance. SOLID LONG-GRAIN COPPER (LGC) CONDUCTORS Long-Grain Copper (LGC) has fewer impurities and fewer internal grain junctions, reducing distortion and digital timing errors. COLD-WELDED, GOLD-PLATED TERMINATIONS This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability. METAL-LAYER NOISE-DISSIPATION SYSTEM It's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDS "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground. FOAMED-POLYETHYLENE INSULATION Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

79 €
36 Instalments 2,73€ / month
Upon Order

Analog-Audio Interconnect Cable named after the Evergreen Bridge that connects Seattle, Washington (USA) to the Bellevue area across Lake Washington.In all Bridges & Falls, you’ll find better metals and more sophisticated technologies — including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System — at lower prices than ever before. Note: All cables in our Bridges & Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today’s connections, including 3.5mm (male or female), DIN, and RCA. Do keep in mind, however, that, by necessity, the plugs on Bridges & Falls cables are fairly close together. If the L and R inputs of your components are more than 3″ (7.6cm) apart, please consider models from our Rivers or Elements Series. Features :ASYMMETRICAL DOUBLE-BALANCED GEOMETRYPurpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.SOLID LONG-GRAIN COPPER (LGC) CONDUCTORSLong-Grain Copper (LGC) has fewer impurities and fewer internal grain junctions, reducing distortion and digital timing errors.COLD-WELDED, GOLD-PLATED TERMINATIONSThis plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.METAL-LAYER NOISE-DISSIPATION SYSTEMIt's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDS "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.FOAMED-POLYETHYLENE INSULATIONAny solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

89 €
36 Instalments 3,07€ / month
Upon Order

Analog-Audio Interconnect Cable named after the Evergreen Bridge that connects Seattle, Washington (USA) to the Bellevue area across Lake Washington.In all Bridges & Falls, you’ll find better metals and more sophisticated technologies — including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System — at lower prices than ever before. Note: All cables in our Bridges & Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today’s connections, including 3.5mm (male or female), DIN, and RCA. Do keep in mind, however, that, by necessity, the plugs on Bridges & Falls cables are fairly close together. If the L and R inputs of your components are more than 3″ (7.6cm) apart, please consider models from our Rivers or Elements Series. Features :ASYMMETRICAL DOUBLE-BALANCED GEOMETRYPurpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.SOLID LONG-GRAIN COPPER (LGC) CONDUCTORSLong-Grain Copper (LGC) has fewer impurities and fewer internal grain junctions, reducing distortion and digital timing errors.COLD-WELDED, GOLD-PLATED TERMINATIONSThis plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.METAL-LAYER NOISE-DISSIPATION SYSTEMIt's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDS "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.FOAMED-POLYETHYLENE INSULATIONAny solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

99 €
36 Instalments 3,42€ / month
Upon Order

Analog-Audio Interconnect Cable named after the Evergreen Bridge that connects Seattle, Washington (USA) to the Bellevue area across Lake Washington.In all Bridges & Falls, you’ll find better metals and more sophisticated technologies — including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System — at lower prices than ever before. Note: All cables in our Bridges & Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today’s connections, including 3.5mm (male or female), DIN, and RCA. Do keep in mind, however, that, by necessity, the plugs on Bridges & Falls cables are fairly close together. If the L and R inputs of your components are more than 3″ (7.6cm) apart, please consider models from our Rivers or Elements Series. Features :ASYMMETRICAL DOUBLE-BALANCED GEOMETRYPurpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.SOLID LONG-GRAIN COPPER (LGC) CONDUCTORSLong-Grain Copper (LGC) has fewer impurities and fewer internal grain junctions, reducing distortion and digital timing errors.COLD-WELDED, GOLD-PLATED TERMINATIONSThis plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.METAL-LAYER NOISE-DISSIPATION SYSTEMIt's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDS "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.FOAMED-POLYETHYLENE INSULATIONAny solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

109 €
36 Instalments 3,76€ / month
Upon Order

Cable 2 x RCA - Jack 3.5mm Male Stereo plugs with Rean Gold in White color and dimension with Cordial cable 1.5m.

15 €
36 Instalments 0,52€ / month
Upon Order

Cable 2 x RCA - Jack 3.5mm Male Stereo plugs with Rean Gold in White color and dimension with Cordial cable 3m.

16 ,74 €
36 Instalments 0,58€ / month
Upon Order

Cable 2 x RCA - Jack 3.5mm Male Stereo with connectors and cable Rean Gold Cordial with dimension 0.9m.

11 ,16 €
36 Instalments 0,39€ / month
Upon Order

Cable 2 x RCA - Jack 3.5mm Male Stereo with connectors and cable Rean Gold Cordial with dimension 1.5m.

11 ,9 €
36 Instalments 0,41€ / month
Upon Order

Cable 2 x RCA - Jack 3.5mm Male Stereo with connectors and cable Rean Gold Cordial with dimension 3m.

13 ,27 €
36 Instalments 0,46€ / month
Upon Order

The GQ Mini Cu cable utilizes Kimber's sophisticated GyroQuadratic (4-wire) braid, which effectively rejects various forms of interference, amounting to clean and quite transmission of the audio signal.(Cp) parallel capacitance: 61.0 pF  20 kHz(Ls) series inductance: 0.84 µH  20 kHz(Rdc) dc loop resistance: 0.089 Ω(Xt) total reactance: 0.104 Ω  20 kHzCrosstalk  -60dB 92.0 kHz

200 €
36 Instalments 6,90€ / month
Upon Order

To facilitate the connection of an iPod, MP3 player, satellite radio or even a computer to your home stereo system Kimber Kable developed the GQ Mini series of multi-purpose cables. The GQ Mini uses the advanced OGQ/2™ geometry (4-wire) braid which keeps the grunge (not the rock and roll type) away and the music powerful. Just connect the 1/8" (3.5mm) mini plug to your portable device (or computer) and the end with the stereo RCA connectors to your home stereo system.(Cp) parallel capacitance: 58.0 pF  20 kHz(Ls) series inductance: 0.81 µH  20 kHz(Rdc) dc loop resistance: 0.087 Ω(Xt) total reactance: 0.097 Ω  20 kHzCrosstalk  -60dB 150.0 kHzFrequency response ± 0.5 dB dc - 8 MHz

570 €
36 Instalments 19,68€ / month
Upon Order

To facilitate the connection of an iPod, MP3 player, satellite radio or even a computer to your home stereo system Kimber Kable developed the GQ Mini series of multi-purpose cables. The GQ Mini uses the advanced OGQ/2™ geometry (4-wire) braid which keeps the grunge (not the rock and roll type) away and the music powerful. Just connect the 1/8" (3.5mm) mini plug to your portable device (or computer) and the end with the stereo RCA connectors to your home stereo system.(Cp) parallel capacitance: 58.0 pF  20 kHz(Ls) series inductance: 0.81 µH  20 kHz(Rdc) dc loop resistance: 0.087 Ω(Xt) total reactance: 0.097 Ω  20 kHzCrosstalk  -60dB 150.0 kHzFrequency response ± 0.5 dB dc - 8 MHz

255 €
36 Instalments 8,80€ / month
Upon Order

To facilitate the connection of an iPod, MP3 player, satellite radio or even a computer to your home stereo system Kimber Kable developed the GQ Mini series of multi-purpose cables. The GQ Mini uses the advanced OGQ/2™ geometry (4-wire) braid which keeps the grunge (not the rock and roll type) away and the music powerful. Just connect the 1/8" (3.5mm) mini plug to your portable device (or computer) and the end with the stereo RCA connectors to your home stereo system.(Cp) parallel capacitance: 58.0 pF  20 kHz(Ls) series inductance: 0.81 µH  20 kHz(Rdc) dc loop resistance: 0.087 Ω(Xt) total reactance: 0.097 Ω  20 kHzCrosstalk  -60dB 150.0 kHzFrequency response ± 0.5 dB dc - 8 MHz

415 €
36 Instalments 14,33€ / month
Upon Order

Mini Jack Male Stereo - to - 2x RCA/Cinch Male - 3 meter

7 €
12 Interest Free Instalments 0,58€ / month
In Stock

Mini Jack Male Stereo - to - 2x RCA/Cinch Male - 1,5 meter

9 €
36 Instalments 0,31€ / month
In Stock

Mini Jack Male Stereo - to - 2x RCA/Cinch Male - 5 meter

12 ,5 €
36 Instalments 0,43€ / month
Upon Order