go to top icon

Adjustment Tools

Filters
16  Products

Description An alignment protractor is used to find the correct distance from stylus tip to tonearm pivot.When aligning a cartridge for tangency using the alignment protractor, it is essential to remember that you are attempting to align the cantilever (and, hence, the stylus), not the cartridge body. There is no guarantee that the cantilever is perfectly aligned within the cartridge body, so simply aligning the cartridge body will not necessarily produce the desired result.Furthermore, many cartridge bodies have non-parallel sides, making tangential alignment of the cartridge body with the lines of tangency on the gauge virtually impossible.An alignment protractor is a plastic template onto which are printed the null point(s) and lines of tangency against which the cartridge should be aligned. The template is placed over the turntable's spindle (made possible via a spindle-sized hole drilled in the template) and placed against the platter.Cartridge must be adjusted until the cantilever is parallel to the set of parallel lines. And this should be achieved for both the indicated points. When the cartridge's longitudinal axis is parallel with the horisontal lines, tracking error will be at a minimum.

6 €
36 Instalments 0,21€ / month
In Stock

Cartridge alignment tool. Tool for cartridge alignment and adjustment. Special slip-proof tool for defining the turning centre of Pro-Ject tonearms. Adaptable to accommodate differing tonearm lengths. Also suitable for other manufacturers’ tonearms.

120 €
36 Instalments 4,14€ / month
Upon Order

Pro-Ject's Measure-It digital tracking force gauge is very accurate, measuring down to three hundredths of a gram!Specifications: 4 digit LCD-Display with backlight   Capacity 0 - 5g   Variance ±0,002g   Auto calibration function   Auto off after 120 seconds   Replacement batteries supplied 

40 €
36 Instalments 1,38€ / month
Upon Order

Manual stylus gauge for simple and accurate adjustment of the tracking force.

15 €
36 Instalments 0,52€ / month
In Stock

The Stabilizer improves stability and tracking. Supplied in a wooden box. Available in silver, matt gold, black and blue.

159 €
36 Instalments 5,49€ / month
Upon Order

Vinyl sound can be significantly improved, when unwanted resonances between record and platter can be reduced, while playback. Therefore surfaces of record and platter should connect tigthly.  Standard record pucks, that use weight to achieve this, have 2 disadvantages:  1) The weight can induce higher levels of rumble, when used with lower cost turntables which have less massive main bearings  2) Instead of tightening the records surface to the platter, heavy weight record pucks can cause the opposite: Vinyl will get shaped like a bowl with no contact of the outer edges of the record to the platter.  Clamp it is the real solution, an accessory with a clamp mechanism around the center spindle, that will not add weight, which would induce rumble. You can fine-adjust pressure according condition of your warped records. Fitting of Clamp it is easily done within seconds. This accessory will not only please your ears, its beautifully machined diamond-cut edges will also look extremely cool on any turntable!  Specifications: Sound improvement for all turntables   Reduces unwanted resonances while playback   Fast and easy mounting  • Fine-adjustment of thightening force   Full metal accessory with leather coating   Diamond cut finish  

99 €
36 Instalments 3,42€ / month
Upon Order

Leveling a turntable is essential to ensure proper performance. If your turntable isn’t level, its speed, tracking ability and tone-arm motion may be affected. The Audio-Technica AT615 machined aluminum turntable level is simple to use, allowing for quick and accurate measurements.

39 ,32 €
36 Instalments 1,36€ / month
In Stock

Stroboscopique disc (50 Hz / 60 Hz) 33 - 45 - 78 rpm.

30 €
36 Instalments 1,04€ / month
Upon Order

Fits all brands and types of turntables and places your 7“ vinyls exactly centrally on the turntable. Adapt it is made from nonmagnetic metal, that makes it look first-class. Unlike cheap plastic solutions, Adapt it is unbreakable and doesn‘t gets lost easily! Specifications: Adaptor for use with 7-inch single records   Locates record centrally on turntable   No plastic - precision CNC-machined   Non-magnetic aluminium   Suitable for all brands and types of record players   2 colour options: black or blue  

18 €
36 Instalments 0,62€ / month
Upon Order

Spirit level for optimum positioning of a turntable. 

29 €
36 Instalments 1,00€ / month
Upon Order

Fits all Pro-Ject tonearms and allows qualified personnel to optimise bearing adjustment,when bearings are misadjusted, because of unassured transport of a turntable. If you are not sure about correct adjustment, please contact your local dealer!  CAUTION: Misuse of this adjustment tool may damage tonearm bearings! Specifications: Suitable for all Pro-Ject tonearms   Allows fine adjustment of bearings, if misadjusted   Caution: for qualified personnel only   Includes 2 inserts for different bearings   Full metal (aluminium & brass)  

29 €
36 Instalments 1,00€ / month
Upon Order

Control of turntable speed.

30 €
36 Instalments 1,04€ / month
Upon Order

The Q UP is a high precision device that safely lifts your tonearm at the end of the record. The Q UP can be installed in minutes, without tools, and is designed to fit on most manual turntables. Based upon a trigger and lift design, now reborn and modernized to work with either classic or contemporary turntable / tonearm combinations. The Q UP can be configured for a variety of tonearm heights, thicknesses and shapes. The Q UP only interacts with the tonearm at the end of record and does NOT adversely effect the tonal quality of your system in any way. No need to worry about falling asleep with your record playing or forgetting it is playing if you get distracted.Specifications: Lifts tonearm, when it moves to the end of a record   Extends stylus life   Suits nearly all tonearms and manual turntables   Includes three stackable platforms for turntables with thick platters   Adjustable trigger sensitivity   No AC or battery power needed   Easy to mount, no additional tools necessary

59 €
36 Instalments 2,04€ / month
Upon Order

33/45 rpm adaptor for Alpha and Omega turntables - Dimensions : 38 x H15 mm - Central hole : 8 mm - Black polyamid 

4 €
24 Interest Free Instalments 0,17€ / month
In Stock

Elipson's digital scale enables extremely precise adjustment of the counterweight situated at the back of the tonearm. It is easy to use and exceptionally accurate, allowing for 0.001g accuracy and measuring vertical tracking forces between 0.1 and 100 grams. It is powered by an included CR2032 battery. Specifications:Accuracy: 0,01 gDimensions: 40 x 72 x 12 mmMax weight: 100 gWeight: 37 gDimensions packaging (W x H x D): 47 x 77 x 17 mmWeight with packaging, unit: 46 g

23 €
24 Interest Free Instalments 0,96€ / month
In Stock

The Elipson spirit level is designed to ensure that your turntable is properly installed. When the turntable is perfectly horizontal, its rotational speed, vertical tracking force and accuracy are optimized. 

15 €
24 Interest Free Instalments 0,63€ / month
In Stock