. go to top icon

Special Microphone Adapters

Filters
17  Products

Ευρυζωνικό antenna booster. για τις σειρές EM3731/3732 και EM2000/2050

539 €
36 Instalments 18,61€ / month
Upon Order

Καλώδιο από ένα ίσιο αρσενικό Lightning σε ένα γωνιακό αρσενικό USB-C 300mm Σημείωση  – To καλώδιο δεν θα φορτίσει και δεν θα συγχρονίσει τις iOS συσκευές σας . Xαρακτηριστικά : Yψηλής ποιότητας shielded USB-C σε Lightning καλώδιο Junction box για την διαχείριση των καλωδίων 300mm μήκος καλωδίου Xρώμα  Mαύρο Bαρος : 5 g. Συμβατά RODEπροϊόντα : VideoMic NTG 

25 €
36 Instalments 0,86€ / month
Available in warehouse

Lectrosonics LM, SM and UM series (for low DC microphones).

86 €
36 Instalments 2,97€ / month
Upon Order

Sennheiser BF1083-U/BF1053-U. Adapter for use with DPA's series of Miniature Microphones.

86 €
36 Instalments 2,97€ / month
Upon Order

Audio Ltd. Mini TX.

87 ,6 €
36 Instalments 3,02€ / month
Upon Order

Trantec S5.5 (UHF).

87 ,6 €
36 Instalments 3,02€ / month
Upon Order

Adapter for DPA Miniature Microphones with low DC, Type 4063 and 4067. MicroDot to Mini-Jack.

87 ,6 €
36 Instalments 3,02€ / month
Upon Order

Power module for AT892 MicroSet. Also suitable for use with any Audio-Technica Wireless Essentials microphone terminated with 4-pin locking connector. The AT8539 allows you to convert your wireless microphone into a wired model. Comes equipped with a snap-on belt clip.

114 €
36 Instalments 3,94€ / month
Upon Order

The Shure A96F transformer connects microphones with an XLR-type connector to the 3.5 mm inputs found on camcorders and other recording devices. It increases the signal level from the microphone, provides a balanced input, and prevents distortion due to the DC bias voltage typically found in camcorder microphone inputs. The A96F can be modified for microphones rated at 150 ohms. This modification is only necessary if the output level from the A96F is insufficient for your recording device. It features a female XLR connector on the microphone end and .6 meter (2 ft) cable with 3.5 mm phono plug on the recorder end.

104 €
36 Instalments 3,59€ / month
Upon Order

Shure A15HP Passive High Pass Filter (100Hz/12dB) Plug Adaptor, XLR in/out.

85 €
36 Instalments 2,93€ / month
Upon Order

 The Shure A85F is a low- to high-impedance microphone-matching transformer that provides 24 dB of signal increase gain. It has balanced female XLR and unbalanced high impedance male 1/4'' phone plug connectors, and may be used in reverse. The A85F is typically used to connect a balanced low-impedance microphone output to an unbalanced high impedance input on a mixer or recorder. NOTE: Not for connection to the balanced line-level output of a mixer.

33 €
36 Instalments 1,14€ / month
In Stock

Shure A400SMXLR Wired Microphone Accessory The A400SMXLR is an accessory that allows permanent installation of a quick-release shock mount for use with a wide variety of gooseneck.

33 €
36 Instalments 1,14€ / month
Upon Order

VXLR ADAPTER MET 1XLRM -> 1J3P35F RODE 

9 €
36 Instalments 0,31€ / month
In Stock

The RODE MiConTM connector system provides seamless integration between the RΨDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems.The MICON-3 is designed to connect to Shure transmitters UR1, UR1M, ULX1, SLX1, PGX1 and PG1.Shure and the Shure products listed are registered names and trademarks owned by Shure.

12 €
36 Instalments 0,41€ / month
Available in warehouse

 The RODE MiConTM connector system provides seamless integration between the RΨDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems.The MiCon-5 is designed to connect to a standard 3 pin XLR, with P48 phantom power.

19 €
36 Instalments 0,66€ / month
In Stock

 The RODE MiConTM connector system provides seamless integration between the RΨDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems.The MICON-2 is designed to connect to a standard 3.5mm stereo minijack, with a power supply of 1V minimum.

13 €
36 Instalments 0,45€ / month
Available in warehouse

The RODE MiConTM connector system provides seamless integration between the RΨDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems.The MICON-6 is designed to connect to AKG transmitters PT40, PT60, PT61, PT80, PT400, PT2000 and PT4000, as well as the Audix RAD-360.AKG, Audix and the AKG and Audix products listed are registered names and trademarks of their respective owners.

14 €
36 Instalments 0,48€ / month
Available in warehouse