go to top icon

Reamping

Filters
3  Products

Re-amping Made Easy! What do you do to make your guitar track thicker? Re-amp! The Radial Reamp JCR is the latest incarnation of the fabled John Cuniberti Reamp products, and it is ready for all your re-amping needs. Why use just one amp on a track? Why not take the dry guitar signal and put it through another amp, or new effects, and re-amp it? With the Radial Reamp JCR it is easier than ever. The JCR takes care of your impedance, phase and connectivity issues, making re-amping quick and simple.Radial Reamp JCR Passive Re-amping Device at a Glance: * Get more out of your tracks with re-amping * Input Control and Noise-free Output * Solid construction Get more out of your tracks with re-amping With the Radial Reamp JCR you can take a pre-recorded guitar track, and send it through a second distortion pedal and amplifier and then slightly delay the track to add a thick doubling effect. You could also use the Reamp JCR from a voice track to a distortion pedal to ad some grit to a performance. Input Control and Noise-free OutputThe Radial Reamp JCR features include balanced line level input, a custom USA-made transformer that converts your signal impedance for use with guitar amps, three-position filter switch, 180-degree polarity reverse to bring your signal into phase, and ground lift options for noise-free operation.Solid constructionAs with all Radial products, the Reamp JCR is built like a tank to provide years of trouble-free performance. A welded I-beam internal skeleton provides a separate housing for maximum protection against external forces, which may cause stress on the PC board assembly while the outside bookend cover provides a protective zone for the switches, potentiometer and connectors. A full bottom no-slip pad performs double duty by keeping the Radial Reamp JCR from sliding around when placed on a vibrating amplifier while also providing electrical and mechanical isolation. Radial Reamp JCR Passive Re-amping Device Features: * Custom transformer * Passive design * 14-Gauge steel welded I-beam construction * Ground lift switch - recessed to prevent accidental use * Phase inverter * Mute switch * Tone control * XLR and TRS inputs * TS outputRe-amping is made simple with the Radial Reamp JCR!Tech Specs* Type: DI * Channels: 1 * Polarity Switch: Yes * Ground Lift: Yes * Inputs: 1 x XLR, 1 x TRS * Outputs: 1 x TS * Height: 2" * Width: 3.5" * Depth: 5.5" * Weight: 2.2 lbs. * Manufacturer Part Number: R800 1030 00

215 €
36 Instalments 7,42€ / month
Available in warehouse

Borrowing the same award-winning microphone preamplifiers found on their 744T digital portable interface, the Sound Devices USBPre 2 provides one of the highest quality portable interfaces available for both Mac and Windows computers. The USBPre 2 is equipped with a pair of fully discrete, transistor-based XLR inputs and impressively lucid 24-bit converters that are capable of up to 192kHz sample rates.Additional inputs for line-level sources and consumer audio electronics, as well as S/PDIF optical Toslink digital devices are also available. A 23-segment, multicolor LED meter provides you with the essential feedback you need to keep an eye on your levels, and are an invaluable asset when using the USBPre 2 as a standalone preamp and A-to-D converter.The MM-1 is at home in high-definition television production, corporate/industrial environments, radio/television announce booths, and music production.Its headphone monitor is an advantage in applications where communications channels or mix-minus feeds need to be monitored in headphones. The user can monitor both microphone audio and external audio sources in headphones with level control. The MM-1 is designed to be durable. Its aluminum chassis, oversized end panels, machined knobs, and panel mounted connectors assure reliable mechanical operation.Sound Devices’ MM-1 is a single-channel, portable microphone preamplifier with a powerful headphone monitoring function. Proven in mission-critical applications, the high-performance microphone preamplifier uses a transformer-balanced input and output with a bipolar ±15 volt power supply to produce low-noise, low-distortion gain at all switch positions. It features an “unclippable” dual-stage limiter and two-position high-pass filter. Flexible microphone powering provides phantom power at 48 volts or 12 volts and 12-volt T-power. It is powered from two-AA batteries or external 5-17 VDC, such as via the PIX-E PSU.Features:Maximum of 66 dB of gain, in eleven discrete stepsDynamic range exceeding 120 dB10 Hz to 50 kHz audio bandwidthHigh immunity to RF interferenceHigh current line output driverTransformer-balanced input and outputExtended range peak limiter via dual opto-isolators makes preamplifier virtually “unclippable”Selectable 48-volt / 12-volt phantom power or 12-volt “T” powerHigh-pass filter @ 80 or 160 Hz, 6 dB per octaveHeadphone monitoring of microphone audio, monitor audio, or a mix of bothMonitor input accepts mono, balanced or unbalanced line-level inputs on 1/4-inch tip-ring-sleeve connectorSeparate level control of Monitor gain and overall headphone gainSplit ear function via DIP switchesInternal battery power (two-AA)Excellent battery life with alkaline and NiMH rechargeable batteriesExternal 5-17 VDC poweringHigh-strength aluminum chassis with durable belt clip   

693 €
36 Instalments 23,92€ / month
Upon Order

The Radial X-Amp is an active Reamper™ that allows the engineer to play a pre-recorded track back through guitar amplifiers and pedals. This opens the door to explore new musical sounds and spur on the creative process so that your recording stands out.Using the X-Amp is easy: start by recording a dry track using a high quality direct box like the Radial J48. Send the new track from your recorder via the X-Amp to your guitar amps, effect pedals or combinations thereof. Once the basic track has been recorded, replacing or adding tracks can be done well after the session player has gone home. This eliminates tiresome repetition and assures a fresh vibrant performance on the final recording. Furthermore, by driving two amps at the same time, new sounds and textures can be created while allowing you to make artistic decisions as the recording progresses.Following the critically acclaimed Radial JD7 Injector, the X-Amp employs a unique class-A circuit design that has been optimized for use with guitars. Features include balanced line level input with LED peak indicator and level control, class-A circuit topology for optimal reach and frequency response, a transformer isolated output to eliminate hum and buzz caused by ground loops, a 180º polarity reverse switch to bring both amps into phase, and a dual ground lift switch for noise-free operation.As with all Radial products, the X-Amp is built like a tank to provide years of trouble-free performance. An internal I-beam skeleton provides maximum protection against external stress which could cause solder points to fail. This is supplemented with an innovative bookend design that creates a protective zone around the switches, potentiometer and connectors. A full bottom no-slip pad performs double duty by keeping the X-Amp from sliding around when placed on a vibrating amplifier while also providing electrical and mechanical isolation. Reamping works equally well on bass, keyboards, drums and voice. Once you start Reamping, you will never record any other way. The Radial X-Amp… the active Reamp® for professional recording engineers.Features:Active Reamp® with two outputs100% discrete class-A signal pathTransformer isolated to eliminate noiseVariable 'set & forget' level control

195 €
12 Interest Free Instalments 16,25€ / month
Available in warehouse