Passive Subwoofers
Metro Audio Hammer-12P Professional passive subwoofer (without amplifier) 12" with power 400 W RMS / 1600 W Peak, frequency response 39 Hz - 120Hz(±10dB), 127dB max SPL(peak), sensitivity 96dB. Impedance: 4Ω. Has 2 NL4 inputs.Birch cabinet in black color, with two handles for easy transport and speaker socket.
Metro Hammer-10P Professional 10" passive subwoofer with 300W RMS / 1200W Peak power, frequency response starts from 42Hz to 350Hz (±10dB), with 94dB sensitivity and 124dB max SPL(peak).The resistance is 4Ω. It has 2 NL4 inputs and the cabin is made of birch in black color, with two handles for easy transport and a slot for a speaker.
Metro Audio Systems Hammer-15P Professional passive subwoofer (without amplifier) 15" with power 450 W RMS / 1800 W Peak, frequency response 35 Hz - 200Hz(±10dB), 129dB max SPL(peak), sensitivity 97dB. Impedance: 8Ω. It has speakon inputs and outputs.
The AMS115 compact subwoofer features a 15-inch neodymium transducer and offers low frequency down to 35 Hz. With a lightweight enclosure, ergonomic handles, M20 threaded pole mount, and 12 M10 suspension points, this passive subwoofer is ideal for a variety of applications in portable setups or permanent installations — especially when paired with Bose AMM multipurpose loudspeakers. For example, combine an AMM112 with the AMS115 subwoofer for fill applications. Or, for front-of-house applications, combine an AMM108 and AMS115 sub to give audiences an impactful, full-spectrum audio experience.FeaturesCompact high-output design with a lightweight, 15-inch neodymium transducer, low frequency down to 35 Hz, and 130 dB peak outputDirect-radiating bass reflex-tuned enclosure with large, ergonomic handles and caster mounting pointsPair with Bose PowerMatch amps and ControlSpace DSP for best performance and loudspeaker protectionDeploy easily in permanent or portable applications with 28 kg (63 lb) design featuring 12 M10 threaded inserts for suspension in permanent installations and integrated M20 threaded pole mount for use in temporary applications
The SX112 is an ultra-compact direct radiating sub-bass system designed to extend the bandwidth and increase the headroom of full-range loudspeaker models. It features a very efficient 12" (300mm) long-throw bass driver with a high power 3" (75mm) voice coil and generously-sized reflex ports for low noise, high power operation.FeaturesUltra-Compact, single driver, direct radiating subwoofer12” (300mm) driver with 3” (75mm) voice coilWater resistant coneLarge ports for reduced air noisePerforated steel grilleBlack or white standard colour optionsIntegrated flying points
Bose Professional MB210-WR compact subwoofers are designed for outdoor installations of background/ foreground music and small sound-reinforcement systems that require low-frequency extension down to 37 Hz. The MB210-WR subwoofer features two (2) 10-inch high- excursion woofers, derived from the award-winning Bose Professional F1 subwoofer, in a compact, exterior-grade plywood enclosure optimized for outdoor, fixed-installation applications. Featuring outstanding performance to size ratio, the MB210-WR is designed to complement Bose Professional loudspeaker lines, in outdoor applications, such as ArenaMatch Utility, Panaray, DesignMax, and Freespace, with additional bass impact.
Bose Professional MB210-WR compact subwoofers are designed for outdoor installations of background/ foreground music and small sound-reinforcement systems that require low-frequency extension down to 37 Hz. The MB210-WR subwoofer features two (2) 10-inch high- excursion woofers, derived from the award-winning Bose Professional F1 subwoofer, in a compact, exterior-grade plywood enclosure optimized for outdoor, fixed-installation applications. Featuring outstanding performance to size ratio, the MB210-WR is designed to complement Bose Professional loudspeaker lines, in outdoor applications, such as ArenaMatch Utility, Panaray, DesignMax, and Freespace, with additional bass impact.
The Control SB2210 provides low frequency reinforcement for a wide variety of sound system applications. Its compact size, high output and outdoor capable design makes it one of the most versatile subwoofers in the installation market. Features: 2 x 250 mm (10 in.) Woven Fiberglass Cone LF Drivers 500 Watts Power handling Frequency Response Down to 38 Hz 13 x M6 Insert Points Including Inserts for Optional U-Bracket Compact, Low Profile Design Specifications: Frequency Range (-10 dB) 38 Hz - 500 Hz Frequency Response (-3 dB) 48 Hz - 95 Hz Power Rating 500W (2000W peak) Continuous Pink Noise (2 hrs) 1000W Continuous Program(2 hrs) 400W (1600W peak) Continuous Pink Noise (100 hrs) Maximum Input Voltage 60.0VRMS (2 hrs), 120V peak Sensitivity 95 dB, 1W @ 1m in half-space (2π loading, average 50 – 90 Hz) Max SPL 122 dB in half-space (2π loading) Nominal Impedance 8Ω Minimum Impedance 7.2Ω at 160 Hz Recommended Filter 45 Hz, 24 dB/oct high-pass filter Low Frequency Two 250 mm (10 inch) diameter LF drivers, long-excursion design, woven fiberglass cone, highly damped butyl rubber surround, linear suspension spider , high temperature anodized aluminum voice coil former, high-temp voice coil wire and coil adhesive, FEA optimized motor construction, aluminum conductive ring. Enclosure Material High Impact PolyStyrene (HIPS) w/ 10% glass fill and internal 8 mm polyurethane co-mold, painted with highly-UV-resistant paint on white (-WH) model for maximum UV fade resistance. Grille Thermoset composite coated steel, zinc-plated, 3-layer foam backing. Environmental IP-45 rating per IEC529 when installed with included MTC-PC2 terminal panel cover. Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Terminals Screw-down terminal strip, zinc plated copper base, nickel-plated metal screws/washers. Accepts up to 9 mm outside, 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5mm2). Included MTC-PC2 and optional MTC-PC3 protective covers available to provide sealed entrance for additional weather protection. Agency Rating ROHS-compliant. Optional MTC-SBT300 transformer is UL recognized per UL1876. Colors Black or white (-WH) Dimensions (H x W x D) 355 x 590 x 570 mm (14 x 23.3 x 22.5 in.) Net Weight 23.31 kg (51.4 lb) Shipping Weight 25.85 kg (57.0 lb) Included Accessories 1 pc MTC-PC2 input panel cover, 4 pcs floor standing feet 4 pcs beveled washers. Optional Accessories MTC-210UB (&-WH) U-BracketMTC-SBT300 70V/100V Transformer, 300W multi-tap, installs onto inside of back input panel using included 4 studs.Transformer Taps:70V: 300W, 150W, 75W, 38W100V: 300W, 150W, 75W
The Control SB2210 provides low frequency reinforcement for a wide variety of sound system applications. Its compact size, high output and outdoor capable design makes it one of the most versatile subwoofers in the installation market. Features: 2 x 250 mm (10 in.) Woven Fiberglass Cone LF Drivers 500 Watts Power handling Frequency Response Down to 38 Hz 13 x M6 Insert Points Including Inserts for Optional U-Bracket Compact, Low Profile Design Specifications: Frequency Range (-10 dB) 38 Hz - 500 Hz Frequency Response (-3 dB) 48 Hz - 95 Hz Power Rating 500W (2000W peak) Continuous Pink Noise (2 hrs) 1000W Continuous Program(2 hrs) 400W (1600W peak) Continuous Pink Noise (100 hrs) Maximum Input Voltage 60.0VRMS (2 hrs), 120V peak Sensitivity 95 dB, 1W @ 1m in half-space (2π loading, average 50 – 90 Hz) Max SPL 122 dB in half-space (2π loading) Nominal Impedance 8Ω Minimum Impedance 7.2Ω at 160 Hz Recommended Filter 45 Hz, 24 dB/oct high-pass filter Low Frequency Two 250 mm (10 inch) diameter LF drivers, long-excursion design, woven fiberglass cone, highly damped butyl rubber surround, linear suspension spider , high temperature anodized aluminum voice coil former, high-temp voice coil wire and coil adhesive, FEA optimized motor construction, aluminum conductive ring. Enclosure Material High Impact PolyStyrene (HIPS) w/ 10% glass fill and internal 8 mm polyurethane co-mold, painted with highly-UV-resistant paint on white (-WH) model for maximum UV fade resistance. Grille Thermoset composite coated steel, zinc-plated, 3-layer foam backing. Environmental IP-45 rating per IEC529 when installed with included MTC-PC2 terminal panel cover. Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Terminals Screw-down terminal strip, zinc plated copper base, nickel-plated metal screws/washers. Accepts up to 9 mm outside, 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5mm2). Included MTC-PC2 and optional MTC-PC3 protective covers available to provide sealed entrance for additional weather protection. Agency Rating ROHS-compliant. Optional MTC-SBT300 transformer is UL recognized per UL1876. Colors Black or white (-WH) Dimensions (H x W x D) 355 x 590 x 570 mm (14 x 23.3 x 22.5 in.) Net Weight 23.31 kg (51.4 lb) Shipping Weight 25.85 kg (57.0 lb) Included Accessories 1 pc MTC-PC2 input panel cover, 4 pcs floor standing feet 4 pcs beveled washers. Optional Accessories MTC-210UB (&-WH) U-BracketMTC-SBT300 70V/100V Transformer, 300W multi-tap, installs onto inside of back input panel using included 4 studs.Transformer Taps:70V: 300W, 150W, 75W, 38W100V: 300W, 150W, 75W
The E118sw is a high-performance direct radiation subwoofer with a single, 800W, 18-inch, aluminum frame woofer. It’s designed to produce crushing low-end for live performance with kick-drum and bass in the PA or for high-level, high-energy dance music. A threaded, M20 pole socket and speaker pole are provided for sub/satellite use with any of the E Series two-way models. For portable applications it includes attachment points for four optional casters. The subwoofer’s 4-ohm impedance means that a single woofer can be optimally powered by a less expensive amplifier. E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke. Features: High output, professional quality sound with 800 W continuous power E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers. E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers: For PLD/CXD visit Amplifier Navigator Software. For GXD visit the GXD Firmware Updater Rugged tour-grade textured paint Foam-lined perforated steel grill E18SW includes speaker pole Model: E118sw Configuration: 1 x 18-inch, subwoofer, non-powered Frequency Response: (-6 dB) 37 Hz to 230 Hz Frequency Range: (-10 dB) 32 Hz to 230 Hz Power capacity1: continuous/peak 800 W / 3200 W Sensitivity: 98 dB, 1 W @ 1 m Coverage Angle: N/A Ouput2 (peak SPL @ 1 m): 133 dB Drivers: LF: 457 mm (18-inch) driver with 102 mm (4-inch) voice coil, HF: N/A Specificarions: Nominal Impedance: 4Ω Cross-over Recommended: 80 – 120 Hz LPF Input connectors: 2 x NL4, 1 x barrier strip Enclosure: Rectangular, plywood, black texture paint finish. Four side mounted handles. Rear panel provision for optional: 4-inch casters. Perforated, powder-coated steel grille with foam lining. Mounting and suspension: M20 threaded pole-mount socket 24-inch (610 mm) pole included Dimensions: 590 x 616 x 605 mm (WxHxD): 23.2 x 24.2 x 23.8 in Net weight: 43 kg / 95 lbs Shipping weight: 48 kg / 106 lb
SRX828S is a dual 18” subwoofer for concert, touring, or installed use. Featuring a wide stance for splaying top boxes, indexing feet for stacking in both the standard and cardioid position, and a 141dB max SPL, the SRX828S is an ideal solution for musicians, bands, and DJs, concert use, public speaking, or installations such as performance venues, corporate spaces, educational facilities or houses of worship. Tunings and presets are available for Crown ITech HD and XTI 2 amps as well as dbx VENU360 signal processors.Features:Premium JBL TransducersRugged, versatile enclosuresTunings available for Crown amps and dbx signal processorsFully supported in Audio ArchitectPower Handling: 4800W Peak, 2400W Program, 1200W ContinuousFrequency Range: 30Hz-150HzFrequency Response: 47Hz-150HzMax SPL: 141dBAmplification options: Passive2x 2279 LF 8 Ohm 18” WooferSpecifications:System Type: Passive dual 18”, subwoofer systemMaximum SPL Output: 141dBFrequency Range (-10dB): 30hz - 150hzFrequency Response (- 3dB): 47hz - 150hzSensitivity (1W/1m): 96dBSystem Power Rating: 4800W Peak, 2400W Program, 1200W ContinuousNominal Impedance: 4 OhmConnectors: NL4 Input, NL4 Loop-thru (+/-1 or +/-2 Selectable)Operational Modes: PassiveLF Driver: (2x) 2279HCrossover Frequency: 80hzEnclosure Material: 18mm plywoodCasters: Accepts JBL WK-4S KitHandles: 8Finish: Obsidian Duraflex™ finishGrille: Powder coated, Obsidian, 14-gauge perforated steel with acoustically transparent black cloth backingDimensions (L x W x H): 26.79" x 47.42" x 22.57" (681mm x 1205mm x 574mm)Weight: 137.0 lbs (62.1g)Shipping Weight: 147.0 (66.5kg)
Passive Subwoofer made of plywood. Specifications:Type: Subwoofer.Woofer: 18".Impedance: 8 Ohms.Power Output: 1500W.Frequency Response: 20 Hz - 300 Hz.Sensitivity: 98 dB.Max. SPL: 128 dB.Impedance: 8 Ohms.Connector: 2 x XLN4.Material: MDF.Dimensions (W x H x D): 700 x 630 x 650 mm.Weight: 47 kg.
This passive subwoofer is the perfect add-on for applications demanding even more powerful low-end response. It is powered by a connected E 110 Sub A or EA 600 amp module. It also sports an E-Connect port (without integrated signal path) for mid/ high units with the amp module.Specifications:Passive system subwoofer, perfect for enhancing low-end responseRemarkably compact and powerfulOne E-Connect coupler with an integrated busExceedingly light weight (16.5 kg)Product Class: ElementsPower-handling nominal (RMS): 250 WFrequency response -10 dB: 45 Hz – 150 Hz, via the active system crossoverLF Speaker: 1x 10"Connections: 1x Speakon In, 1x Speakon Out, 1x E-Connect outPole mount: 1 E-Connect sleeveDimensions (WxHxD): 30 x 48 x 46 cmWeight: 16,5 kg / 36,4 lbs.
Housed in a bass reflex enclosure, the two 10" woofers pack a powerful punch and deliver lowranging bass response that is sure to impress and amaze. Remarkably compact, versatile and light at less than 26 kg, it is readily combined with mid/ high units to deliver outstanding performance as a system. Setting up and operating such a powerful yet inconspicuous rig is a piece of cake.Features:Application: SubwooferPower handling: 500 watts RMSMax. SPL: 127 dBFrequency response: 40 Hz - 150 HzBuilt-in system crossover for connecting satellites directlySpecifications:Power-handling nominal (RMS): 500 WPower-handling, program: 1000 WPower-handling, peak: 1500 WNominal impedance: 4 ohmsMax SPL: 126 dB half space (@10% THD)Sensitivity 1W/1m: 101 dB half spaceFrequency response +/- 3 dB: 60 Hz – X-overFrequency response -10 dB: 40 Hz – X-overLF Speaker: 2x 10"Crossover frequency: 150 Hz, 12 dB/oct.Connections: 2x Speakon NL4Pole mount: 2x M20Handles: 2, integratedEnclosure: MDF
Boasting an 18" woofer in a bass reflex housing, this bin delivers a low-ranging bass foundation. The specially designed active stereo x-over routes the right frequency spectrum to the mid/ high unit connected via the Satellite Out. The active PR:O 18 SUB A model also ships with a 600W RMS power amp and a port for active satellites.Features:Application: SubwooferPower Capacity: 500/1000 WattMax. SPL: 129 dBFrequency Range: 38 Hz – fxBuilt-in Crossover Output for SatellitesSpecifications:Power-handling nominal (RMS): 500 WPower-handling, program: 1000 WPower-handling, peak: 1500 WNominal impedance: 4 ohmsMax SPL: 128 dB half space (@10% THD)Sensitivity 1W/1m: 104 dB half spaceFrequency response +/- 3 dB: 48 Hz – X-overFrequency response -10 dB: 38 Hz – X-overLF Speaker: 1x 18"Crossover frequency: 150 Hz, 12 dB/oct.Connections: 2x Speakon NL4Pole mount: 1x M20Handles: 2, integratedCasters: optional 100 mmEnclosure: MDF
12" passive subwoofer1600 W (peak), 129 dB peak SPL utilizing high sensitivity transducer designed and engineered by EV for maximum punch.High-output EVS-12L woofer designed to exacting specifications for superior durability and exceptional low-frequency reproduction.System reliability verified with over 500 hours of abuse testing and endurance testing.Ideal for portable and installed applications. Lightweight, compact 15 mm wood enclosure with internal bracing with durable polyurea top-coat finish.Professional-grade hardware: integrated M20 threaded pole mount plate and two-handle design for easy lifting.The ELX series is designed to deliver an unprecedented combination of sound quality, portability and durability at its price point. All-new custom components—tested to levels far exceeding the industry norm—make ELX200 a robust workhorse capable of handling real-world abuse and professional applications beyond the capability of competitors’ products in its category.Every aspect of ELX200 is designed for ideal results as part of the whole - the acoustical, electrical and mechanical components all work together seamlessly. The subwoofers pack powerful low-frequency output into a surprisingly compact footprint, and feature tuned 15 mm thick wood enclosures with a premium top-coat finish. The proprietary features that have made the other members of the EV portable speaker family a go-to for best-in-class performance are also present.EV's industry-leading quality and testing procedures yield efficient transducer design and meaningful specs, resulting in components that deliver accurate, linear response at the system’s highest output levels. Translation: loud and clear all the way up to the limit. Unified in one of the strongest full-range composite enclosures ever built by EV. The ELX200 is established as the new benchmark for toughness - both acoustically and physically; maximum efficiency with maximum toughness.
1600 W (peak), 134 dB peak SPL on the EKX-18S utilizing highsensitivity transducers designed and engineered by EV. Lightweight, compact 15-mm wood enclosure with internal bracing, and durable EVCoat finish. Large slot ports for low distortion and excellent bass extension. Metal grille reinforcement bar (two bars on the EKX-18S). M20 threaded pole mount plate.Specifications:Axial Sensitivity (SPL, 1 W - 1 m): 96 dBNominal Impedance: 8 Ω Frequency Response (-10 dB): 35 Hz - 300 Hz Half Space MeasurementConnector Type: Dual NL4 Enclosure Material: 15 mm, plywood with EVCoat Grill: Grill 18 AWG steel with powdercoatWeight Net: 31.8 kg (70.11 lbs)
12" passive subwoofer1600 W (peak), 129 dB peak SPL utilizing high sensitivity transducer designed and engineered by EV for maximum punch.High-output EVS-12L woofer designed to exacting specifications for superior durability and exceptional low-frequency reproduction.System reliability verified with over 500 hours of abuse testing and endurance testing.Ideal for portable and installed applications. Lightweight, compact 15 mm wood enclosure with internal bracing with durable polyurea top-coat finish.Professional-grade hardware: integrated M20 threaded pole mount plate and two-handle design for easy lifting.The ELX series is designed to deliver an unprecedented combination of sound quality, portability and durability at its price point. All-new custom components—tested to levels far exceeding the industry norm—make ELX200 a robust workhorse capable of handling real-world abuse and professional applications beyond the capability of competitors’ products in its category.Every aspect of ELX200 is designed for ideal results as part of the whole - the acoustical, electrical and mechanical components all work together seamlessly. The subwoofers pack powerful low-frequency output into a surprisingly compact footprint, and feature tuned 15 mm thick wood enclosures with a premium top-coat finish. The proprietary features that have made the other members of the EV portable speaker family a go-to for best-in-class performance are also present.EV's industry-leading quality and testing procedures yield efficient transducer design and meaningful specs, resulting in components that deliver accurate, linear response at the system’s highest output levels. Translation: loud and clear all the way up to the limit. Unified in one of the strongest full-range composite enclosures ever built by EV. The ELX200 is established as the new benchmark for toughness - both acoustically and physically; maximum efficiency with maximum toughness.
The Baso cabinets are universally useable passive bass cabinets. Their bass reflex design is engineered to be as compact as possible while giving the maximum performance in terms of sound quality and pressure. Their enclosures are crafted out of sturdy high-quality plywood while their elegant design enables them to be placed in any environment.The Baso15 is loaded with a 15” high-performance woofer with an RMS power rating of 700 Watt and maximum power of 1400 Watt. The strength of this loudspeaker originates from a 4” voice coil which is allowed to extra long excursions. Displacements are precisely controlled by the dual low-loss suspension resulting in a superior linear behaviour.These carefully selected high-grade materials in collaboration with accurate acoustical craftmanship results in an impressive combination of punch and low frequency extension without compromises. The highly efficient design results in a sensitivity of 99 dB with a capability of continuous sound pressure production up to 127 dB. The frequency response ranges from 38 Hz up to 300 Hz while going down to 34 Hz at -10 dB.Besides these acoustical aspects, a lot of attention has been paid to all other aspects making it as versatile as possible. The enclosure is compact designed without any sacrifice to robustness due to the 18 mm high-quality plywood material finished with structured coating. The integrated carry handles and possibility to add an optional 35 mm pole adapter improve its mobility.Connections are made using two speakon compatible connectors located in a recessed connector dish, allowing link-through to other cabinets. This also allows close placement to any wall or corner.
The Baso cabinets are universally useable passive bass cabinets. Their bass reflex design is engineered to be as compact as possible while giving the maximum performance in terms of sound quality and pressure. Their enclosures are crafted out of sturdy high-quality plywood while their elegant design enables them to be placed in any environment.The Baso12 is loaded with a 12” high-performance woofer with an RMS power rating of 500 Watt and maximum power of 1000 Watt. The strength of this loudspeaker originates from a 4” voice coil which is allowed to extra long excursions. Displacements are precisly controlled by the dual low-loss suspension resulting in a superior linear behaviour.These carefully selected high-grade materials in collaboration with accurate acoustical craftmanship results in an impressive combination of punch and low frequency extension without compromises. The highly-efficient design results in a sensitivity of 98 dB with capability of continuous sound pressure production up to 125 dB. The frequency response ranges from 40 Hz up to 300 Hz while going down to 35 Hz at -10 dB.Besides these acoustical aspects, a lot of attention has been paid to all other aspects making it as versatile as possible. The enclosure is compact designed without any sacrifice to robustness due to the 18 mm high-quality plywood material finished with structured coating.Connections are made using two speakon compatible connectors located in a recessed connector dish, allowing link-through to other cabinets. This also allows close placement to any wall or corner.
The Baso cabinets are universally useable passive bass cabinets. Their bass reflex design is engineered to be as compact as possible while giving the maximum performance in terms of sound quality and pressure. Their enclosures are crafted out of sturdy high-quality plywood while their elegant design enables them to be placed in any environment.The Baso10 is loaded with a 10” high-performance woofer with an RMS power rating of 225 Watt and maximum power of 450 Watt. The strength of this loudspeaker originates from a four layer wounded 1.5” voice coil in combination with an over-sized ferrite type magnet which provides an unusual high force factor. In combination with the low-loss suspension, this results in a linear behaviour with high efficiency and extremely wide frequency range.These carefully selected high-grade materials in collaboration with accurate acoustical craftmanship results in a deep and true to nature reproduction of bass. The highly-efficient design results in a sensitivity of 96 dB with capability of continuous sound pressure production up to 120 dB. The frequency response ranges from 54 Hz up to 1.2 kHz while going down to 38 Hz at -10 dB.Besides these acoustical aspects, a lot of attention has been paid to all other aspects making it as versatile as possible. The enclosure is compact designed without any sacrifice to robustness due to the 15 mm high-quality plywood material finished with structured coating.Connections are made using two speakon compatible connectors located in a recessed connector dish, allowing link-through to other cabinets. This also allows close placement to any wall or corner.
QSC AD-S28Tw Surface Mount Subwoofer 250W, Dual 8 Inch Woofers, 70/100 V Multitap Transformer.Specifications:Dual 8" polypropylene cone woofers.Large port area for extended low-frequency performance.Dual chamber ported bandpass cabinet.Defeatable passive 120 Hz low-pass filter with impedance compensation.250 watts continuous power handling, 700 watts peak.
JBL JRX 218S. 18 in. compact subwoofer. - 350 W (continuous), 1400 W (peak) power capacity. The rugged enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for durability and improved low-frequency performance.The enclosure is covered in black carpet. A top mounted, cast aluminum 36 mm pole mount receptacle can receive an optional SS3BK pole to facilitate use of the JRX218S as a base for a midhigh speaker cabinet. Non-resonant, all steel handles are used. Attractive 18-gauge perforated steel grille protects components from damage. Specifications:Power Rating350 / 1400 WFrequency RangeAt -10 dB: 38 to 300 HzFrequency ResponseAt ±3 dB: 55 to 300 HzSensitivity96 dB SPL (1m)Nominal Impedance4ΩAmplifier Power350 to 700 W into 4ΩCrossover Adjustment30 Hz HPF, 24 dB / octave; 80 to 100 Hz LPF, 24 dB / octaveMaximum SPL127 dBLow Frequency DriverJBL 2043-GInput Connectors1 x Neutrik Speakon NL-41 x 0.25" (6.35 mm) TS phone jack; parallelDimensions (H x W x D)23.5 x 20.3 x 22.0" (605.0 x 508.0 x 551.0 mm)Weight89.0 lb (40.4 kg)
PRX418S is an eighteen inch subwoofer which, when combined with the two-way models, provides a sub/sat system capable of generating 135 dB of full-range, high quality audio. Features : Tough DuraFlexT finish enclosure Heavy Duty 16 gauge protective screen backed steel grille.Specifications:Handles 800W Continuous / 1,600W Program3,200W Peak Handling8Ω Nominal Impedance80Hz Low-Pass Crossover35Hz Hi-Pass FilterSpeakon NL-2 and 1/4" Combo InputsDurable Design Protects WooferPole Mount Cup for Full-Range Speaker
JBL ASB 6118. High Power Single 18" Subwoofer. 1 x 18" 2242H VGC Driver. Suspension Eyebolts Not Included. Arrays with AM6200 and AM4200 Mid-High Loudspeakers Using Optional PAF-2K Planar Array Frame Kit.