go to top icon

Pop Filters and Windshields

Filters
42  Products

TM-AG1 is a pop filter that helps to achieve cleaner vocal recordings. It consists of a dual-layer nylon screen with side air vents that effectively reduces plosives and protects the microphone from saliva. With its gooseneck clamp, it can be easily attached to the mic stand and adjusted in a variety of positions.

25 €
36 Instalments 0,86€ / month
In Stock

Not your ordinary pop screen. This unique metal screen is not simply perforated, but implements a slightly convex shape to redirect low-frequency air blasts to the side of the screen. This process does not attenuate high frequencies (as fabric screens can) and leaves the vocal performance completely unaffected, minus any disruptive low frequency "pops". The gooseneck holds its position at any angle, keeping you covered at all times. And since the whole thing is made of metal, it will take a lot more abuse than a traditional fabric shield. This tool is built to last.

32 €
36 Instalments 1,10€ / month
Available in warehouse

The Pop is a universal windscreen for use with any microphone. Simply clamp it to the mic stand and position where desired. The sturdy wire mesh and frame ensure years of durability.

35 €
36 Instalments 1,21€ / month
In Stock

The DeadCat GO is a furry wind cover for the VideoMic GO, designed for use in windy environments.Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.

27 €
36 Instalments 0,93€ / month
Available in warehouse

The DeadCat VMPR is a furry wind cover for the VideoMic Pro, designed for use in windy environments. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent. The DeadCat VMPR is compatible with the VideoMic Pro featuring Rycote Lyre shockmounting (after May 2015). For VideoMic Pro models with band suspension please see DeadCat VMP.

33 €
36 Instalments 1,14€ / month
Available in warehouse

The K and M Popkiller - a world-wide classic. For stands with diameter of up to 30 mm. Double nylon screen for superior performance. Unobtrusive black round filter frame. Non-marring locking screw prevents scratching of mic stand. Specifications:Goose neck diameter: 8 mmGoose neck length: 330 mmMaterial: steelScrew-on to: tube diameter up to 30 mmShield diameter: 130 mmType: blackWeight: 0.22 kg

24 €
36 Instalments 0,83€ / month
Upon Order

The large Popkiller for modern studio engineering. The large 200 mm nylon screen guarantees optimum sound filtering during studio recording. The Popkiller with flexible gooseneck can be screwed to all standard microphone stands (rod diameter max. 30 mm). Specifications:Goose neck diameter: 8 mmGoose neck length: 330 mmMaterial: steelScrew-on to: tube diameter up to 30 mmShield diameter: 200 mmType: blackWeight: 0.32 kg

31 €
36 Instalments 1,07€ / month
Upon Order

Artificial Fur Wind Shield for Blimp .

42 €
36 Instalments 1,45€ / month
In Stock

The RØDE Blimp is a complete windshield and shock mounting accessory for the NTG1, NTG2 and NTG3 microphones, as well as any third party shotgun microphone up to 325mm (12 ¾”) in length.Now featuring the Rycote Lyre suspension system, the Blimp provides the ultimate in microphone suspension and isolation. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.The Blimp’s handle has also been completely redesigned, reducing the product weight significantly, while increasing the ergonomics for handheld use. Housed inside the grip is a heavy-duty Mogami cable which splits via a junction box to a highly-flexible thin cable inside the Blimp, to minimise the transference of vibration to the microphone.With the lightweight design of the handle and suspension system the new Blimp design is over 25% lighter (550gm without microphone or DeadWombat fitted).The Blimp attaches to any standard boompole via 3/8' thread attachment at the base. The Universal Blimp Mount is available as an option to remove the handle when the Blimp is being used primarily on a boompole to reduce weight.Features:Type: Basket

225 €
36 Instalments 7,77€ / month
Available in warehouse

The Isolation Pack is an essential accessory package for anyone wishing to record vocals and consists of a shock mount and an integrated pop shield. The new quick-release shock mount is designed specifically for the Magneto, X1 Series and sE 2200a II series of microphones.  Along with the shock mount comes an integrated, height adjustable pop shield with a quick release mechanism for instrument mic’ing.The Pop Shield is an essential part of any vocal recording set-up, the pop shield is made from metal as oppose to the usual fabric shield, creating a much more durable product which is built to last. The Isolation Pack is a cost effective and versatile product, crucial for any vocal recording situation.

49 €
36 Instalments 1,69€ / month
Available in warehouse

Another first from sE... simple, but highly effective. This is our professional solution to the problem of needing different pop shields to suit vocal performances. The device has a stong goose neck with both a standard fabric membrane and our pro metal pop shield on a hinge mechanism. You can use either separately or both simultaneously depending on the application.

40 €
36 Instalments 1,38€ / month
Available in warehouse

There is a difference between pop filters! Here are four good reasons to choose DPA's exclusive pop filter:MountingThe DPA pop filter is mounted between the mic stand and the mic holder. It will always follow any movement of the microphone. Its adjustability in distance and angle makes it suitable for all microphones.Sound qualityYou won't hear this pop filter! The pop-screen does not attenuate the higher frequencies beyond the tolerance field of the microphone's frequency response.Wind protectionThe DPA pop filter is one of the most efficient pop reducing products on the market today.Durability The DPA pop filter is a stainless steel construction and will not wear out like a gooseneck. The screen can be replaced if necessary.

163 ,6 €
36 Instalments 5,65€ / month
Upon Order

Shotgun windscreen (black).

20 €
36 Instalments 0,69€ / month
Upon Order

Large studio foam windscreen (black).

46 €
36 Instalments 1,59€ / month
Upon Order

Small foam windscreen (black).

12 €
36 Instalments 0,41€ / month
Upon Order

Ball-shaped foam windscreen (black). Fits Audio-Technica Case Style(s): S7, T1, T4, T6, T7.

14 €
36 Instalments 0,48€ / month
Upon Order

Small foam windscreen for ATM73 models (black). Fits Audio-Technica Case Style(s): M5.

10 €
36 Instalments 0,35€ / month
Upon Order

Large ball-shaped foam windscreen (black).

18 €
36 Instalments 0,62€ / month
Upon Order

Black foam windshield used with the AT8418 gooseneck clip-on mount for use with the ATM350 and PRO35 instrument microphones.

5 €
36 Instalments 0,17€ / month
Upon Order

Shield your microphone against wind and moisture with this Sennheiser MKW 4 foam windscreen that fits Sennheiser MK4 condenser microphones.

29 €
36 Instalments 1,00€ / month
Upon Order

Foam windshield for MD 21 and MD 421

35 €
36 Instalments 1,21€ / month
Upon Order

Foam windshield for use with MD 425, MD 431 and all Evolution 800 & 900 Series

50 €
36 Instalments 1,73€ / month
Available in warehouse

Foam windshield for use with ME66 microphone head Lenght: 190mm Diameter: 58mm

65 €
36 Instalments 2,24€ / month
In Stock

Used in conjuction with MZW 60-1 

185 €
36 Instalments 6,39€ / month
In Stock

Lightweight protective basket windshield for MKH-70-1

285 €
36 Instalments 9,84€ / month
Upon Order

Foam windshield for SKM 100/300/500

19 €
36 Instalments 0,66€ / month
Available in warehouse

Foam windshield for MD 441

35 €
12 Interest Free Instalments 2,92€ / month
Upon Order

Velour foam windshield for use with MKH416 & MKH 60 Lenght:188mm Diameter: 68mm

88 €
36 Instalments 3,04€ / month
Upon Order

Velour foam windshield for MKH 70 lenght: 320mm Diameter: 70mm

139 €
36 Instalments 4,80€ / month
Upon Order

Lightweight rugged protective basket windshield for MKH 60 and MKH 416 

289 €
36 Instalments 9,98€ / month
Available in warehouse

Foam windscreen for Shure's SM94, 849, BG4.1, KSM109/SL, and PG81 microphones.

14 ,9 €
36 Instalments 0,51€ / month
In Stock

The Shure A32WS Windscreen is designed with acoustically transparent foam to reduce unwanted breath and wind noise without affecting the sound quality. It is particularly effective in reducing pops and ticks caused by talking or singing closely into the microphone as well as reducing wind noise when using the microphones in outdoor applications. For use with Shure KSM27, KSM32 and KSM44 microphones.

13 €
36 Instalments 0,45€ / month
Upon Order

Reduces unwanted breath and wind noise. For use with Shure Microflex Gooseneck Microphones. Available in black.

7 €
36 Instalments 0,24€ / month
Upon Order

Foam windscreen for SM85, SM86, SM87A, Beta

12 ,9 €
36 Instalments 0,45€ / month
In Stock

The Shure A58WS Windscreen is designed with acoustically transparent foam to reduce unwanted breath and wind noise without affecting the sound quality. It is particularly effective in reducing pops and ticks caused by talking or singing closely into the microphone as well as reducing wind noise when using the microphones in outdoor applications. For use with all larger Shure "ball-type" microphones including the SM58, Beta58A, SM48, and the 565SD microphones.

7 €
36 Instalments 0,24€ / month
Upon Order

Foam wind shield for NT-5 and NT-6 microphones.

14 €
36 Instalments 0,48€ / month
Available in warehouse

The RODE WS6 Deluxe Windshield is designed to reduce wind noise when recording in adverse environmental conditions.Suitable for the RΨDE NTG-1 and NTG-2, as well as any shotgun microphone with a maximum slot length of 160.5mm (6 1/4') and a diameter of 21-22.5mm.

49 €
36 Instalments 1,69€ / month
In Stock

Foam wind shield for ΝΤ-1Α, ΝΤ-2Α, ΝΤ-1000, ΝΤ-2000, ΝΤΚ, Κ2, BroadCaster microphones.

15 €
36 Instalments 0,52€ / month
Available in warehouse

Καλάμι boom 0,84 έως 3m. 850gr με standard πάσσο 3/8

39 €
36 Instalments 1,35€ / month
Available in warehouse

The Shure PS-6 Popper Stopper is widely recognized throughout the recording and post-production communities as the leading tool in pop elimination technology. With a 6 inch (7.62cm) diameter, the highly durable four-layer screen stops plosive consonants such as "p" and "b", while the fully adjustable 14 inch (35.56cm) gooseneck and mic stand clamp ensure flexibility across any number of applications.

40 €
36 Instalments 1,38€ / month
Upon Order

The Sontronics ST-POP is an adjustable pop filter, and is an essential piece of equipment for anyone recording speech or vocals. The dual-layer nylon mesh significantly reduces the ‘popping’ noises associated with plosive consonants, such as ‘p’ and ‘b’. Similarly, the harshness caused by sibilant sounds – ‘s’, ‘z’, ‘sh’, ‘ch’ – is also dramatically reduced, helping you capture the best possible recording from the very beginning. The flexible arm allows simple and accurate positioning when clamped to any microphone stand. Maintenance is easy too: just unscrew the clamp at the bottom of the ring and remove the cartridge. This can be cleaned in warm, soapy water and left to dry naturally. A replacement nylon cartridge is also included, so that your Sontronics pop filter is always there when you need it.

40 €
36 Instalments 1,38€ / month
Available in warehouse

Pop Shield for stands with diameter of up to 30 mm. Double nylon screen for superior performance. Unobtrusive black round filter frame. Non-marring locking screw prevents scratching of mic stand.Specifications:Dampens the plosives (when you pronounce a p or a b) and protects your mic during voice recordingsFilter with double acoustic screen made from high quality nylon meshAdjustable universal clamp fixes securely to any mic standFlexible metal goose neck for precise and stable positioning16 cm diameter

19 €
36 Instalments 0,66€ / month
Upon Order