Turntables Stylus

Replacement stylus for the Audio-Technica AT3600L cartridge Trusted by countless music lovers for more than 50 years, it features a new modern design while maintaining the ease of use, reliability, and sound quality that have made it the replacement stylus of choice for so many turntables. The 0.6 mil conical stylus ensures proper contact with the record groove, even when the cartridge is not completely level.

The most cost-effective upgrade for your PlanarThe Rega Carbon Pro Stylus is an upgrade stylus that replaces the standard stylus of the Rega Carbon moving magnet cartridge. In place of the original conical profile, it offers a bonded elliptical stylus that reads the groove more precisely and delivers better dynamics and more detail. Rega recommends it as a cost-effective upgrade for the Planar 1, Planar 1 Plus and Planar 2 turntables with their factory Carbon cartridge, and for any Carbon cartridge fitted to another turntable.Fitted in secondsThe upgrade takes just seconds, with no tools and no need to remove the cartridge from the tonearm. Remove the old stylus by gently pulling its plastic housing, then insert the new one at an angle until it clicks into place. The cartridge stays aligned, and the recommended tracking force remains 2 to 3 g.Ideal as a replacement tooWhen the time comes to replace a worn Carbon stylus, the Carbon Pro is a smart choice: for a small difference in cost, your turntable does not just return to its original performance, it surpasses it.

The original Carbon stylusThe Rega Carbon Stylus is the genuine replacement stylus for the Rega Carbon moving magnet cartridge, the cartridge factory-fitted to the Planar 1, Planar 1 Plus and Planar 2 turntables. It has the same conical profile as the stylus supplied with the cartridge from the factory, so it restores the Carbon to exactly the sound and performance it had when new.When to replace itA stylus is a consumable part that wears gradually with every play. A worn stylus loses detail and clarity, adds distortion, especially in the inner grooves, and over time can put stress on your records. Replacing it in good time protects your collection and keeps the turntable in the best possible condition. And if the stylus is damaged in an accident, replacing it costs far less than a new cartridge.CompatibilityIt fits any Rega Carbon cartridge, whether it is mounted on a Rega turntable or on a turntable from another manufacturer. For those who want more detail, Rega also offers the Carbon Pro Stylus upgrade with an elliptical stylus.

The Audio-Technica AT-VMN95EBK is a genuine VM95 Series replacement stylus with a elliptical tip (0.3 × 0.7 mil) and an aluminium cantilever. It is the black-housing version of the AT-VMN95E, for the AT-VM95E cartridge, and fits every VM95 cartridge.Upgrade without a new cartridgeAll VM95 cartridges (C, E, EN, ML, SH, SP) share the same body, so every stylus in the series fits every cartridge. When the stylus wears, you buy only the stylus, or upgrade the sound by choosing a different tip.Stylus lifeA elliptical stylus lasts approximately 300 hours of play. After that the sound loses clarity and record grooves wear, so replacing it on time protects your collection.Easy to changeThe old stylus slides out by pulling it forward and the new one clicks into place in seconds, with no tools and no new tonearm setup.

The Audio-Technica ATN3600LE is a replacement stylus with a 0.3 × 0.7 mil elliptical tip for the AT3600L cartridge. It is the easiest sound upgrade for any turntable using the ATN3600L or ATN3600LC conical stylus: more detail, cleaner highs and less distortion, without changing the cartridge.Compatible Audio-Technica turntablesAT-LP60X series (including AT-LP60XBT and AT-LP60XUSB), AT-LP60 series, AT-LP2D series, AT-PL300 series, AT-SB727, AT-SB2022, AT-LPGO-BT and AT-PL50. It also fits other brands’ turntables with an AT3600L cartridge: check your turntable’s manual.Easy to changeThe old stylus slides out by pulling it forward and the new one fits in place with no tools. Recommended tracking force 3.0 – 4.0 g (3.5 g standard), stylus life approximately 300 hours.

This 33/45 RMP replacement stylus is compatible with TEAC turntables MC-D800 LP-P1000/LP-R500/LP-R550.Product weight:0.02 kilograms

TA-HS2 Headshell for TN-280BT, BlackManufacturer number:TA-HS2Product weight:30.0 kilogramsPieces per master carton:1 Piece

This 78 RMP replacement stylus is compatible with TEAC turntables LP-P1000/LP-R500/LP-R550.Product weight:0.01 kilograms

Replacement stylus Nagaoka MP-110 JN-P110, Tonar article 6821 Cantilever: aluminum alloyStylus: 0.4 x 0.7 Mil bonded elliptical diamond stylus tip

AT-VMN95ML, VM95 series Microlinear replacement stylusAluminium CantileverMicrolinear StylusNude Square ShankEvery cartridge diamond stylus becomes worn after a period of play.Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

Replace Stylus for the Audio Technica AT-XP7 Cartridge

The Audio-Technica AT-VMN95C is a genuine VM95 Series replacement stylus with a conical tip (0.6 mil, bonded round shank) and an aluminium cantilever. It is the original stylus of the AT-VM95C cartridge and fits every VM95 cartridge, as well as the AT-LP70XBT and AT-LP70X turntables fitted with the AT-VM95C.Upgrade without a new cartridgeAll VM95 cartridges (C, E, EN, ML, SH, SP) share the same body, so every stylus in the series fits every cartridge. When the stylus wears, you buy only the stylus, or upgrade the sound by choosing a different tip.Stylus lifeA conical stylus lasts approximately 500 hours of play. After that the sound loses clarity and record grooves wear, so replacing it on time protects your collection.Easy to changeThe old stylus slides out by pulling it forward and the new one clicks into place in seconds, with no tools and no new tonearm setup.

ATN-XP30.6 mil conical replacement stylus for these cartridges: AT-XP3

Replacement stylus for the 2M Bronze cartridge.

Ανταλακτική βελόνα για την κεφαλή της ortofon DJ s

Ανταλακτική βελόνα για την κεφαλή της ortofon Concorde Mix MKII

Physically 2M styli will fit on alternative 2M cartridges bodies, but 2M Series cartridges’ engines, coils and magnets configurations are not quite identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. 2M Silver phono cartridge is an OEM (Original Equipment Manufacturer) model that takes most of the characteristics of the 2M Red. 2M Silver's special feature is silver plated copper coils, the same coil wire material as in the 2M Bronze and Black models, with a reduced number of windings. Frequency range - 20-22.000 Hz  Frequency response - 20-20.000 Hz + 3 / - 1 dB  Tracking ability at 315Hz at recommended tracking force *) - 70 µm  Compliance, dynamic, lateral - 20 µm/mN  Stylus type - Elliptical  Stylus tip radius - r/R 8/18 µm  Equivalent stylus tip mass - 0.5 mg  Tracking force range - 1.6-2.0 g (16-20 mN)  Tracking force, recommended - 1.8 g (18 mN)  Tracking angle - 20°

Replacement stylus for the AT-XP5 head. Upgrade for the AT-XP3 head. Compatible with AT-XP3 and AT-XP7 heads. The product has a factory authenticity tape. Handmade in Japan.

The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club.The CLUB features a Special-Elliptic stylus that allows for detailed sound quality: Special-Elliptic stylus fits better in the groove and therefore has more contact area with the groove itself, extracting more intricate details, than is possible with a spherical diamond.The CLUB’s 8 mV output voltage requires less gain from the preamps, providing cleaner sound reproduction and less susceptibility to feedback in live environments.The CLUB offers an outstanding platform for archival and sampling.

The Concorde ELITE is a premium Moving Magnet cartridge, based on the legacy of the Ortofon Concorde MkII Series. Owing to the number of components' upgrades, the ELITE achieves a new level of sound quality, not previously found in the DJ categorized cartridges.

Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.   Larger, wider and more robust stylus body Easier to grip and handle Better fix by metal spring Tactile feedback of correct mount Large stylus viewing cut‐out

Replacement stylus for VM670SP VMN70SP Replacement stylus for VM670SP. Conical (3mil) stylus, Nude Rectangular Shank construction in grey

Replacement stylus for VM760SLC VMN60SLC Replacement stylus for VM760SLC. Special Line Contact stylus, Nude Rectangular Shank construction in black

2.7 x 0.26 - Shibata Replacement Stylus for these cartridges: VM750SH

2.2 x 0.12 - MicroLine® Replacement Stylus for these cartridges: VM540ML, VM740ML

0.3 x 0.7 - Elliptical Replacement Stylus for these cartridges: VM530EN

Replacement stylus for VM520EB. VMN20EB Replacement stylus for VM520EB. Elliptical Bonded stylus, Bonded Round Shank construction in blue.

Replacement stylus for VM510CB & VM610MONO. VMN10CB Replacement stylus for VM510CB & VM610MONO. Conical Bonded stylus, Bonded Round Shank construction in blue.

0.3 x 0.7 mil elliptical replacement stylus for these cartridges: AT85EP, AT301EP, AT311EP, AT316EP, AT92ECD

Genuine Denon replacement stylus for Denon MM turntable cartridges. Replacing the stylus in time keeps sound quality high and protects your records from wear.The role of the stylusThe stylus is the only point of contact between the turntable and the record. Its condition determines how faithfully the information cut into the groove is conveyed, and how well your records are preserved over the years. That is why replacing it in good time is one of the simplest and most effective care steps for any vinyl system.Small part, big responsibilityThe stylus tip moves within the groove and turns its tiny modulations into motion, which the cartridge converts into an electrical signal. Any deviation in the shape of the tip directly affects sound quality.Normal wearLike any part that works through friction, the stylus wears gradually with use. Wear is slow and often not noticed straight away, so its condition is worth checking at regular intervals.Replacement without changing the cartridgeIn moving magnet (MM) cartridges, such as those supplied with many Denon turntables, the stylus is a separate, removable part. You can renew the most delicate part of the cartridge without changing the whole cartridge and without re-adjusting the tonearm.Why genuine mattersA genuine Denon spare part is designed for the specific cartridge body, so it fits correctly and preserves the sound the manufacturer intended. Correct fit also ensures the tip sits in the right position within the groove, avoiding needless wear on your records.When to replace itThere is no single number of hours that applies to everyone, as stylus wear depends on how often you listen, how clean your records are and how well the turntable is set up. There are, however, clear signs that it is time for a new one, as well as simple habits that extend its life. Paying attention to them protects your collection.Audible signsIf the sound becomes dull or veiled, the treble loses its sparkle, or distortion appears in loud passages and on vocals, especially towards the end of a side, the stylus has most likely worn.Mechanical signsA stylus that skips grooves, slides across the record, or looks bent or crooked when viewed up close needs replacing immediately. Continued use can cause permanent damage to the grooves, which no new stylus can undo.Proper careClean the stylus regularly with a soft brush designed for the purpose, always moving it from back to front, and keep your records free of dust. Fit the stylus guard whenever you move or clean the turntable, when accidental knocks are most likely.Regular checksAn occasional check with a magnifying glass, or by your technician, helps spot wear early. It is a good idea to keep a spare stylus on hand, so listening is not interrupted when the time comes to change it. A worn stylus costs far less than a damaged record.Choosing and fittingDenon offers different replacement styli, each designed for a specific cartridge body. Choosing the correct code is the most important step. Once you have the right part, fitting is a simple process that takes a few minutes, needs no tools and restores your turntable's sound quality to how it was on the first day.Find the correct codeThe replacement stylus code is listed in the specifications and owner's manual of your turntable or cartridge. Compare it with the product code before buying. If in doubt, our team can help you confirm compatibility.Removing the old stylusBefore you start, lock the tonearm in its rest and switch the turntable off. Then gently pull the old stylus assembly forwards, without putting pressure on the cartridge body.Fitting the new oneSlide the new stylus into place, holding it by its plastic body, until it is fully seated. Then check the tracking force according to the manufacturer's instructions, so it reads the groove correctly and wears evenly. Finally, give the new tip a gentle clean before playing your first record.Ready to listenWith a new stylus, detail and clarity return and your records are protected. Make a note of the date you changed it, so you know when the next check is due, and keep the stylus guard fitted whenever the turntable is not in use.

Replacement stylus for AT5V cartridge with stainless tension wire.

VM95 series 78rpm SP replacement stylus Aluminium cantilever SP 3mil Conical Stylus Bonded Round Shank VM95 Series - Styli compatibility Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus. Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible. AT-VMN95C,AT-VMN95E,AT-VMN95EN,AT-VMN95ML,AT-VMN95SH,AT-VMN95SP Conical Bonded (3mil) Stylus A conical bonded stylus with a large curvature radius at the tip. The curvature radius is 3 mil, and suitable for playing 78 RPM records from a wide variety of eras.

The Audio-Technica AT-VMN95SH is a genuine VM95 Series replacement stylus with a Shibata tip (nude diamond, square shank) and an aluminium cantilever. It is the original stylus of the AT-VM95SH cartridge and fits every VM95 cartridge.The Shibata tip has a large contact area with the groove, for excellent high-frequency resolution, low distortion and long life. It is the top stylus in the VM95 Series.Upgrade without a new cartridgeAll VM95 cartridges (C, E, EN, ML, SH, SP) share the same body, so every stylus in the series fits every cartridge. When the stylus wears, you buy only the stylus, or upgrade the sound by choosing a different tip.Stylus lifeA Shibata stylus lasts approximately 800 hours of play. After that the sound loses clarity and record grooves wear, so replacing it on time protects your collection.Easy to changeThe old stylus slides out by pulling it forward and the new one clicks into place in seconds, with no tools and no new tonearm setup.

VM95 series Elliptical Nude replacement stylus Aluminium cantilever Elliptical Nude Stylus Nude Round Shank VM95 Series - Styli compatibility Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus. Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible. AT-VMN95C,AT-VMN95E,AT-VMN95EN,AT-VMN95ML,AT-VMN95SH,AT-VMN95SP Elliptical Nude Stylus Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

The Audio-Technica ATN95EX is a genuine replacement stylus for the AT95EX cartridge, with a 0.3 × 0.7 mil elliptical diamond on a bonded round shank. It restores your cartridge’s clear, detailed sound and protects your records from wear.When to replace the stylusAn elliptical stylus lasts approximately 300 hours of play. If the sound becomes dull or distorted, it is time to replace it.Easy to changeThe old stylus slides out by pulling it forward and the new one fits in place with no tools.

0.6 mil conical replacement stylus for these cartridges: AT91R and CN5625AL

The Audio-Technica ATN91 is a genuine replacement stylus for the AT91 cartridge. It also fits the discontinued CN5625AL and AT90 cartridges, so you can keep using your cartridge with a fresh stylus.Upgrade for the AT3600LThe ATN91 can also be used as an upgrade on the AT3600L cartridge. Note: with the ATN91, the AT3600L needs a tracking force of 2 g, so do not replace the ATN3600L with it if your tonearm does not allow tracking force adjustment.Easy to changeThe old stylus slides out by pulling it forward and the new one fits in place with no tools.

ATN81CP  Replacement stylus for AT81CP cartridge Replacement stylus for AT81CP Conical Stylus Bonded Round Shank Construction Tracking force: 1.0 to 1.5 g (1.25 g standard)

Physically 2M styli will fit on alternative 2M cartridges bodies, but 2M Series cartridges’ engines, coils and magnets configurations are not quite identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. 2M Silver phono cartridge is an OEM (Original Equipment Manufacturer) model that takes most of the characteristics of the 2M Red. 2M Silver's special feature is silver plated copper coils, the same coil wire material as in the 2M Bronze and Black models, with a reduced number of windings. Frequency range - 20-22.000 Hz  Frequency response - 20-20.000 Hz + 3 / - 1 dB  Tracking ability at 315Hz at recommended tracking force *) - 70 µm  Compliance, dynamic, lateral - 20 µm/mN  Stylus type - Elliptical  Stylus tip radius - r/R 8/18 µm  Equivalent stylus tip mass - 0.5 mg  Tracking force range - 1.6-2.0 g (16-20 mN)  Tracking force, recommended - 1.8 g (18 mN)  Tracking angle - 20°

The Audio-Technica AT-VMN95E is a genuine VM95 Series replacement stylus with a elliptical tip (0.3 × 0.7 mil, bonded round shank) and an aluminium cantilever. It is the original stylus of the AT-VM95E cartridge and fits every VM95 cartridge.Upgrade without a new cartridgeAll VM95 cartridges (C, E, EN, ML, SH, SP) share the same body, so every stylus in the series fits every cartridge. When the stylus wears, you buy only the stylus, or upgrade the sound by choosing a different tip.Stylus lifeA elliptical stylus lasts approximately 300 hours of play. After that the sound loses clarity and record grooves wear, so replacing it on time protects your collection.Easy to changeThe old stylus slides out by pulling it forward and the new one clicks into place in seconds, with no tools and no new tonearm setup.

The Audio-Technica ATN95E is a genuine replacement stylus for the classic AT95E cartridge, one of the most widely used phono cartridges. It also fits the discontinued AT93 and AT95 cartridges.When to replace the stylusThe stylus tip wears gradually with use. If the sound becomes dull or distorted, it is time to replace it so your record grooves are not damaged.Easy to changeThe old stylus slides out by pulling it forward and the new one fits in place with no tools and no new setup.

Replacement needle for Ortofon Super OM 10, OM 10, OMP-mount 10, OMBulk 10, OMT 10, LM 10, Concorde 10, Concorde EC 10, Concorde STD, TM 10H, LMB 12, SMB 12, LMA 12. Frequency range: 20-24.000 Hz Frequency response: 20-20.000 Hz + 3 / - 1 dB Tracking ability at 315Hz at recommended tracking force*): 70 µm Compliance, dynamic, lateral: 25 µm/mN Stylus type: Elliptical Stylus tip radius: r/R 8/18 µm Tracking force range: 1.25-1.75 g (12.5-17.5 mN) Tracking force, recommended: 1.5 g (15 mN) Tracking angle: 20° Stylus colour: Black

Phono cartridge for turntables Audiophile vinyl enjoyment because pure silver offers crystal clear performance!2M series uses Ortofons own technology, that allows to reach same levels of flat frequency response than Moving Coil cartridges. 2M Silver combines these technologies with ultimate simple mounting procedure for nearly all available turntables. Due to MM principle, 2M cartridges are compatible with most phono preamplifiers. An absolutely feature unique in this price range, 2M Silver uses internal silver plated copper coils, which guarantees outstanding sonic results! Features : Moving Magnet principle Silver plated copper coils windings to achieve higher quality and more dynamic playback compared with conventional MM cartridges Suitable for low to medium tonearm masses 1/2 inch mounting standard High trackability 2M Silver should be connected to phono MM inputs As with most MM cartridges, stylus may be exchanged Specifications : Weight 7.2 g Stylus type elliptical Stylus tip radius 8 x 18 µm Frequency response 20 - 25.000 Hz Output voltage 5.5 mV Channel separation >25dB @ 1kHz Compliance dynamic/lateral 20/20 µm/mN Auflagekraftbereich 1.6-2,0 g Recommended tracking force 1.8 g Trackability (315 Hz, lateral) >70 µm Tracking angle 20° Internal inductance 700 mH Recommended load resistance 47 kΩ

The OM 5S is a moving magnet cartridge for general purpose applicationIf your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate. If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5 g. Styli types and interchangeabilityBy adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application and budget. In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Specifications : Output voltage at 1000 Hz, 5cm/sec. - 4.5 mV Channel balance at 1 kHz - 2 dB Channel separation at 1 kHz - 20 dB Channel separation at 15 kHz - 12 dB Frequency range at - 3dB - 20-20.000 Hz Frequency response - 20-22.000 Hz Tracking ability at 315Hz at recommended tracking force *) - 60 µm Compliance, dynamic, lateral - 20 µm/mN Stylus type - Spherical Stylus tip radius - R 18 µm Tracking force range - 1.5-2.0 g (15-20 mN) Tracking force, recommended - 1.75 g (17.5 mN) Tracking angle - 20° Internal impedance, DC resistance - 750 Ohm Internal inductance - 450 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-500 pF Cartridge colour, body/stylus - Black/Black Cartridge weight incl. extra weight - 5 g Cartridge weight excl. extra weight - 2.5 g

The Super OM 5E major improvements: 1. By means of computer simulations it has been possible to define the natural pivot point of the system with unprecedented accuracy while achieving an optimum oscillation balance. The result: improved linearity, higher channel separation and reduced distortion. 2. Slit less than 1 mm dia. hollow pole pins significantly reduces eddy current losses caused by magnetic hysteresis. This technology extends the frequency range and improves phase linearity. 3. OM Super 5 cartridge body is manufactured from a Noryl (plastic & glass compound) which ensures high rigidity and freedom from resonances. Optimal fit and sound reproductionIf your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate. If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5g. Super OM 5E features Elliptical stylus that provides balanced and distortion-free playback. Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion. Styli types and interchangeabilityThe OM 5s features a Spherical diamond. Spherical diamonds are the simplest and most robust diamonds. The OM 5E and Super OM 5E feature an Elliptical diamond. In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Specifications : Output voltage at 1000 Hz, 5cm/sec. - 4 mV Channel balance at 1 kHz - 1.5 dB Channel separation at 1 kHz - 22 dB Channel separation at 15 kHz - 15 dB Frequency range at - 3dB - 20-25.000 Hz Frequency response - 20-20.000 Hz ± 2 dB Tracking ability at 315Hz at recommended tracking force - 65 µm Compliance, dynamic, lateral - 20 µm/mN Stylus type - Elliptical Stylus tip radius - r/R 8/18 µm Tracking force range - 1.5-2.0 g (15-20 mN) Tracking force, recommended - 1.75 g (17.5 mN) Tracking angle - 20° Internal impedance, DC resistance - 1 kOhm Internal inductance - 580 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-500 pF Cartridge colour, body/stylus - Black/Black Cartridge weight incl. extra weight - 5 g Cartridge weight excl. extra weight - 2.5 g