. go to top icon

Ethernet

Filters
8  Products

The PreSonus SW5E is a five-port AVB switch. Four of the ports can provide Power over Ethernet (PoE) for PoE-compatible devices, while the fifth port is non-PoE, which is useful for linking to additional switches. Housed in a rugged, all-metal chassis, it can be rack mounted using a rack tray (not included). All ports employ secure, rugged XLRnet locking XLR Ethernet jacks, making the SW5E a great choice for live sound systems.

433 €
36 Instalments 14,95€ / month
Upon Order

The new HP4 from PreSonus answers the need for a headphone distribution amplifier with professional specifications in a small package at an affordable price. The HP4 features four discrete headphone outputs on the front panel each with its own volume potentiometer and 150mW of amplification per channel. The HP4 also features adjustment over control room monitors with a separate volume control, monitor mute switch and mono switch giving you an extremely powerful monitoring solution at an amazingly low price.HP4 Features:Four High Power Headphone OutputsUltra loud (150mW per channel)Ultra quiet operationMusical Wide Dynamic RangeControl Room Monitor Outputs with Level ControlMono or Stereo OperationMonitor Mute SwitchDaisy Chain an Infinite Number of UnitsCompact package

599 €
12 Interest Free Instalments 49,92€ / month
Upon Order

As a stage box or audio interface for your DAW, the MOTU Stage-B16 combines ample I/O with ultra-low latency and networking capabilities via AVB Ethernet connectivity. Built-in DSP means you can add modeled analog EQ, vintage compression, and outstanding reverb to inputs and outputs, while mixing up to 48 channels and 12 stereo buses. You get 16 stellar mic preamps, and you can link multiple Stage-B16s via Ethernet if you need more I/O. For studio recording on your Mac or with your iOS device, connect via USB 2.0 for high-quality audio recording up to 192kHz.Audio Video Bridging over Ethernet (AVB) is a way to transmit digital audio and video over an Ethernet cable and allows you to network devices together for better system management and higher capacity. You can connect the MOTU Stage-B16 directly to the Ethernet port on your Mac computer, or you can connect it to a network switch like MOTU's AVB Switch so that any device on the network can access it. Basically, AVB allows for high channel counts, ultra-low latency, and network audio over a simple Ethernet cable.Like all MOTU equipment, the Stage-B16 is reassuringly rugged for reliable performance on the road. Connect your mics and stage monitors, then run a single Ethernet cable to your Mac or your MOTU AVB Switch. You'll have control over all functionality from any computer, iOS, or Android device that can access the network, no matter where you are in the venue.Features:16 x 8 digital mixer, stage box, and AVB/USB audio interfaceBuilt-in DSP for EQ, compression, and reverb on all inputs and outputsEthernet connectivity offers ultra-low latency, even with 100m cable runsA smart way to add more audio channels to your AVB networkMultiple units can be daisy-chained for higher channel countsStellar sound quality with up to 192kHz resolutionPowerful mixer with up to 48 channels and 12 stereo busesCan be used as an iOS audio interface via USB (requires Camera Connection Kit)Built ruggedly to withstand stage useControl all functionality with the web-based app from any computer or device connected to the network

1.975 €
12 Interest Free Instalments 164,58€ / month
Upon Order

A valuable addition to Focusrite’s RedNet range of audio-over-IP interfaces, RedNet AM2 is a compact, flexible Dante-compatible stereo monitoring unit combining headphone and line outputs for monitoring of signals from the Dante network wherever required. RedNet AM2 features a ¼" front-panel TRS headphone socket plus a pair of rear-mounted balanced line outputs with male XLR connectors for loudspeaker monitoring and other applications.Designed to drive high or low impedance headphones at high levels, the headphone output delivers significant audio output power. The compact unit, mounted in an enclosure based around a sturdy road-worthy aluminium extrusion, is fitted with non-slip feet, and can either sit securely on a flat surface or be mounted on top of a mic stand using the standard threaded bush incorporated in the base.RedNet AM2 includes the latest two-channel Dante receiver and provides high-quality digital to analogue conversion at up to 96kHz for accurate monitoring on loudspeakers or headphones. Two large volume control knobs are provided for Headphone and Line output levels, the latter featuring a mute button with associated LED. Other indicators show the presence of power, network and signal level.Dual locking etherCON connectors are included to connect the network and to daisy-chain to additional network devices. The unit is powered via Power over Ethernet (PoE) or via the rear-panel barrel connector and included DC power supply. Features:Cost-effective headphone/loudspeaker stereo monitoring solution for Dante offers lower system deployment costsSuperb digital to analogue conversion at up to 96kHz provides transparent and accurate audio qualityPowerful headphone amp delivers plenty of level even with high-Z headphones for maximum high-quality audibilityIndependent headphone/line output level controls for maximum controlLine output mute switch instantly kills the signal to external speakers or power ampsIntegrated Gigabit Ethernet switch allows connection of a second device for simpler cablingBuilt-in mic stand mount plus non-slip feet – mount RedNet AM2 to a mic stand or place securely on a surface​Specifications:Computer Connectivity: DanteForm Factor: DesktopSimultaneous I/O: 2 x 2Analog Outputs: 2 x XLR, 1 x 1/4" (headphones)Digital Inputs: 2 x EtherCON DantePower Supply: Power over Ethernet or 12V DC power supplySample Rate: 44.1kHz - 96kHzManufacturer Part Number: AM2​​

787 €
36 Instalments 27,17€ / month
4-10 days

RedNet D64R provides the link between a Dante Ethernet-based audio system and any MADI / AES10 setup. D64R supports up to 64 channels of both coaxial and optical MADI interfaces and is completely bi-directional, allowing the use of any Dante components including RedNet’s high quality interface products with a MADI system – or MADI components with a Dante system. D64R features a sample rate converter (SRC) on each input and output allowing interfacing between MADI and Dante irrespective of the sample rate at which either system is operating. Connect a Dante network to MADI-based digital consoles, computer cards, converters and much more. In addition to both coax and optical MADI interfaces, RedNet D64R provides Word Clock in and out. The D64R features a rugged, roadworthy exterior and high internal build quality, with Ethernet and power supply redundancy. In addition, it offers a compact 1U rack-mount form factor for a full 64 channels of I/O. Features:Connects a MADI system and a Dante network seamlessly together. Connect Dante to digital mixing consoles, interfaces and cards that use MADI; or extend a MADI system with RedNet’s versatile, superb-quality audio interfaces and connectivity – or any other Dante compatible devices.Built-in redundancy with dual locking power and etherCON network connectors.Supports both coax and optical interfaces – connect simply to any MADI equipment.Slave either the Dante system or MADI streams to an external clockSupports up to 64 channels of digital audio I/O at standard sample rates (44.1/48kHz) from a MADI system, 32 channels at 96kHz and 16 at 192kHz.Sample rate conversion (SRC) on each input and output, allowing MADI and Dante systems to operate simultaneously at different sample rates.Simple 1U rack-mount module with the classic red aluminium faceplate.RedNet Control and Dante software allow remote routing and control from the audio computer system via a software control panel – no hardware patching required.​Specifications:Computer Connectivity: IP NetworkForm Factor: RackmountSimultaneous I/O: 64 x 64Digital Inputs: 1 x BNC (MADI Coaxial), 1 x Optical (MADI)Digital Outputs: 1 x BNC (MADI Coaxial), 1 x Optical (MADI)Clock I/O: 1 x Word Clock (In), 1 x Word Clock (Out)Data I/O: 2 x etherCON EthernetRack Spaces: 1U

4.822 €
36 Instalments 166,47€ / month
4-10 days

RedNet A8R expands Focusrite’s growing range of 1U Dante interfaces with network and power supply redundancy, providing eight channels of analogue input and output. RedNet A8R offers high quality 192kHz/24-bit A-D and D-A digital conversion with up to 119dB dynamic range, plus two channels of AES/EBU digital I/O, to and from the Dante network.RedNet A8R provides 24-bit conversion at 44.1, 48, 88.2, 96, 176.4 and 192kHz sample rates (remotely-selectable) and includes pull-up/down capability. Electronically-balanced analogue audio I/O is provided on DB25 connectors wired to AES59 specifications. Internal signals are balanced throughout. Inputs and outputs are remotely configurable for 0dBFS= +18dBu or +24dBu signal levels. In addition, two channels of AES/EBU I/O are provided on XLR connectors, with sample rate conversion on the input. The clock source for the unit may be internal, or external via Word Clock or DARS (via the XLR input). RedNet A8R also outputs Word Clock.RedNet A8R features power and network redundancy, with two separate universal (100–240V) PSUs, which include IEC connectors with retaining clips, plus dual network interfaces on locking etherCON connectors. These ports can be configured remotely to Redundant or Switched (daisy-chain) mode.Specifications:Eight channels of high-quality line-level analogue I/O24-bit precision Focusrite conversion up to 192kHz119dB dynamic range, flat from 20Hz – 20kHz, +/-0.15dBInternally balanced throughoutDante-based remote-controlled audio-over-IP connectivityDual power supplies and network connections with full power and network redundancy, including latching connectors for maximum reliabilityWord Clock I/O and DARS for increased flexibility, plus an additional two channels of AES/EBU I/OAnalogue I/O to AES59 standard on DB25 connectorsComprehensive front-panel indicatorsSoftware-based routing and control – no hardware patching required

1.958 €
36 Instalments 67,60€ / month
Available in warehouse

RedNet 1 connects to your network with a single Ethernet cable. It’s remotely controlled via the network and can be placed anywhere in your facility. It offers eight channels of line-level analogue in and out, with Focusrite’s precision 24-bit A-D and D-A conversion for superb audio performance, and 119dB dynamic range at sample rates up to 192kHz.\The rear panel includes standard DB25 connectors for analogue patchbay or breakout cable interfacing.RedNet 1 can be used simply as a means of converting 8 channels of audio and delivering it somewhere else on the network at near-zero latency. If you need to connect RedNet 1 to your computer there are three methods:The RedNet PCIe card for Core Audio and ASIO applications such as Logic and Nuendo RedNet 5 for Pro Tools HD, Pro Tools HDX and Pro Tools HD Native via DigiLink connectorsDirectly to your computer’s Ethernet port using a standard Ethernet cable (with “Dante Virtual Soundcard”)​Specifications:Reliable, robust digital audio networking for the studio24-bit operation at up to 192kHz sampling rateUp to 128 inputs and 128 outputs at 48 and 96kHzSuperb audio quality with a dynamic range of 119dBProven Dante networking technology uses standardnetworking componentsJetPLLTM technology provides ultra-low-jitter in all I/O unitsUnits are hot-swappable, detected and configured automaticallyon plug-inRedNet 1 Features:Dynamic Range: 119dBTHD+Noise (input and output)

1.758 ,69 €
36 Instalments 60,72€ / month
Available in warehouse

64x64 Premium Audio Interface For Pro Tools | HD™ And Thunderbolt™ 2 Workflows, Featuring Eight Red Evolution Mic Pres And 32x32 Dante™ Audio-Over-IP Connectivity Red 8Pre features both Thunderbolt 2 connectivity and dual mini-DigiLink ports allowing you the best of both Core Audio and Pro Tools | HD workflows. Take Red 8Pre on the road for location recording over Thunderbolt then connect the same interface to Pro Tools|HDX or Pro Tools|HD Native back at the studio for mixdown. Switch easily between Pro Tools | HD and any Thunderbolt-connected DAW with Host Mode. The combination of low-latency conversion and driver technology allows real-time foldback mixes to be created in the DAW while you continue to use your native plug-ins. Unlike many interfaces, both mini-DigiLink and Thunderbolt 2 connectivity comes as standard, so there's no need to buy an additional option card. Eight Red Evolution Mic Pres Focusrite's Red Evolution mic pres draw on many decades of design prowess as well as many of the elements behind the incredibly popular RedNet mic pre used in many studios, broadcast facilities and live performances around the world. The digitally-controlled mic pres deliver a clear and honest sound with very low noise and plenty of gain available for the most-quiet of sources. They can be controlled from the front panel or remotely over Thunderbolt using RedNet Control. Additionally the mic pre settings can be saved and recalled allowing you to quickly re-setup for your next session. They also include our unique 'Air' effect, recreating the sound of the transformer-based mic preamps in the ISA and original Red ranges. When 'Air' is enabled, the microphone impedance is lowered and the sound is given a subtle mid-high boost – all in the analogue domain. Parallel Path Conversion Focusrite has been designing digital converters for over 20 years. From the original Blue 245 and 260 mastering-grade A-D and D-A, through the Liquid Channel and more recently RedNet, digital conversion is a key part of our design heritage and philosophy. Every converter we design starts with the same objectives: low latency, high dynamic range and a flat, wide frequency response. Red 8Pre's conversion achieves just that, lightning fast performance, a dynamic range of 118dB A-D and 121dB D-A and a flat response to 35kHz. By using “parallel path summing" we have achieved even greater noise-performance than ever. Room For Expansion While Red 8Pre has enough I/O for many scenarios, sometimes more is needed. That's why Red 8Pre includes two ADAT ports, for up to 16 additional inputs and outputs. Simply connect any ADAT equipment, such as the Focusrite Octopre, using light pipes. However in today's modern studio, audio networking is taking over. Focusrite's RedNet range is the world's most popular modular audio-over-IP platform. We've brought some of that technology to Red 8Pre, allowing up to 32 channels of Dante inputs and outputs to be connected. Simply plug in an Ethernet cable and add additional mic pres or line I/O with ease. Alternatively arrive at the studio or venue and simply connect one Ethernet cable to Red 8Pre to gain access to the whole network. The possibilities are huge. Hugely Flexible Since Red 8Pre allows the user to assign any physical input or output to any driver/Pro Tools|HD channel, it's easier than ever to customise the interface layout and integrate hardware inserts. Simply open RedNet Control software and reallocate the channels as required. Simple Switching Between DAWs Switch between Pro Tools | HD and a DAW connected to the Thunderbolt interface using the Host Mode setting in the included RedNet Control software. For example, you can switch quickly and easily between Pro Tools | HD and Ableton, Logic or Pro Tools software - just keep both connected at all times and make the switch whenever you need. Ultra-Low Latency Monitoring latency is the enemy of any performer and if the performance isn't excellent, the final mix won't be either. By utilising the lowest-latency conversion available, coupled with a high-performance Core Audio driver, Red 8Pre's analogue round trip latency is kept to an exceptionally low minimum of 1.67ms. Included Software Red 8Pre includes the new RedNet Control software, providing a straightforward and intuitive way to set up mixes and monitoring - and more! Control the mic pres – recall settings, assign stereo pairs, adjust gain and enable features such as highpass filtering and phantom power. Switch quickly between Pro Tools | HD and a Thunderbolt-connected DAW with the Host Mode setting. In addition, Red 8Pre is packaged with Hitmaker Expansion. The Focusrite Studio Console Reborn In Your DAW The Focusrite Studio Console defined countless hits of the 80s and 90s, thanks in large part to its ISA 110 Equaliser and ISA 130 Dynamics Modules. Brainworx's bx_console Focusrite plug-in brings you stunningly accurate emulations of both in a single plug-in, perfectly capturing the famously warm, open sound of two of the most revered pieces of studio hardware ever made. Hitmaker Expansion Improve your sound with studio quality vocals, powerful guitars, rich keys and huge drums, then mix and master with iconic Focusrite studio hardware — all in the box. Every new Red interface comes with an unbeatable range of tried-and-tested studio tools from some of the biggest names in the business. Hitmaker Expansion — available with every newly registered Red interface — is built to get you mixing and mastering release-ready music immediately. These are all the plug-ins you need to take your studio-quality tracks to the next level and achieve professional results.

3.538 €
36 Instalments 122,14€ / month
4-10 days