Microphone accessories

Professional drum mic clampDrum mic clamp for tom-tom and snare drums.Thanks to their size and to their sturdiness, these clamps are the ideal support for your toms and snare drums mics:Compact Easy to fix and to removeThe ribbon absorbs the noises and the shocks

The EA 89 A has a swivel mount with a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands.

The new WA-MBA professional broadcast boom arm from Warm Audio adds the finishing touch to your broadcast or streaming setup, allowing you to properly position your microphone for ultimate sound quality. With a hidden internal cable management system and easy-to-grab tension hinges, getting the professional appearance and performance you’ve been looking for onstream has never been easier. The Finishing Touch For Your Streaming Setup

Not your ordinary pop screen. This unique metal screen is not simply perforated, but implements a slightly convex shape to redirect low-frequency air blasts to the side of the screen. This process does not attenuate high frequencies (as fabric screens can) and leaves the vocal performance completely unaffected, minus any disruptive low frequency "pops". The gooseneck holds its position at any angle, keeping you covered at all times. And since the whole thing is made of metal, it will take a lot more abuse than a traditional fabric shield. This tool is built to last.

Microphone Stand With noise reductive cast-iron base Height adjustable from 87 to 157 cm Weight: 3.6 kg Colour: Pure white

Microphone Stand Gray soft-touch coating Solo tripod with footfall sound absorbing iron base Diameter base: 25 cm Height adjustable 87 - 157.5 cm Weight: 3.6 kg

Microphone Stand With impact noise dampening cast base Base diameter: 250 mm Height-adjustable tube construction Height: 87 - 157 cm Weight: 2.8 kg Colour: Black

Bάση Μικροφώνου ιδανικό για Broadcast δραστηριότητα

Inexpensive stand with professional features. Fiberglass-reinforced plastic base with foldable legs. Complete with boom arm.

The Pop is a universal windscreen for use with any microphone. Simply clamp it to the mic stand and position where desired. The sturdy wire mesh and frame ensure years of durability.

Shock mount with an integrated pop filter

  Microphone StandBlackCast-iron base with special rubber insert for silencingScrewed, adjustable tube combinationWeight: 2.5kgH: 217-347 mmBase-Ø 180 mm

The K&M 25905 Low Profile Kick Drum Mic Stand is a kick drum mic stand, featuring a low profile, an adjustable bar, and an adjustable height from 380-600mm. The bar on this microphone stand can be adjusted from a length of 460mm to 765mmSpecifications:Kick drum mic standLow profileAdjustable bar: 460-765mmAdjustable height: 380-600mmWeight: 1.4 kg

Straight microphone stand with tripod leg base and.  Height 1-1.76m. Boom Lenght : 850mm.   

TM-AG1 is a pop filter that that helps to achieve cleaner vocal recordings. It consists of a dual-layer nylon screen with side air vents that effectively reduces plosives and protects the microphone from saliva. With its gooseneck clamp, it can be easily attached to the mic stand and adjusted in a variety of positions.  Specifications:Reduces plosives during vocal recordings (speech or singing)Dual nylon screen with side air vents for efficient noise reductionLong gooseneck with clamp for flexible attachment and adjustmentNo logo on the screen, so the speaker/singer can concentrate on their performanceDimensions (W × H × D): 152 mm × 514 mm × 177 mmGooseneck length: 351 mmWeight: 270 g

he APM is a microphone base, designed to be used with the CMX series gooseneck microphones (or any other gooseneck microphone with XLR connector) on any amplifier with microphone inputs.

The large Popkiller for modern studio engineering. The large 200 mm nylon screen guarantees optimum sound filtering during studio recording. The Popkiller with flexible gooseneck can be screwed to all standard microphone stands (rod diameter max. 30 mm). Specifications:Goose neck diameter: 8 mmGoose neck length: 330 mmMaterial: steelScrew-on to: tube diameter up to 30 mmShield diameter: 200 mmType: blackWeight: 0.32 kg

The K and M Popkiller - a world-wide classic. For stands with diameter of up to 30 mm. Double nylon screen for superior performance. Unobtrusive black round filter frame. Non-marring locking screw prevents scratching of mic stand. Specifications:Goose neck diameter: 8 mmGoose neck length: 330 mmMaterial: steelScrew-on to: tube diameter up to 30 mmShield diameter: 130 mmType: blackWeight: 0.22 kg

The Isolation Pack is an essential accessory package for anyone wishing to record vocals and consists of a shock mount and an integrated pop shield. The new quick-release shock mount is designed specifically for the Magneto, X1 Series and sE 2200a II series of microphones.  Along with the shock mount comes an integrated, height adjustable pop shield with a quick release mechanism for instrument mic’ing.The Pop Shield is an essential part of any vocal recording set-up, the pop shield is made from metal as oppose to the usual fabric shield, creating a much more durable product which is built to last. The Isolation Pack is a cost effective and versatile product, crucial for any vocal recording situation.

Another first from sE... simple, but highly effective. This is our professional solution to the problem of needing different pop shields to suit vocal performances. The device has a stong goose neck with both a standard fabric membrane and our pro metal pop shield on a hinge mechanism. You can use either separately or both simultaneously depending on the application.

The new star in your show! The avant-garde, one-hand microphone stand is setting new standards in design and function. The elegant combination of triangular-shaped sections and the new design of the slender one-hand adjustment mechanism go harmoniously with standard microphone clips and microphones. The integrated knurled screw is impossible to lose and makes tightening and positioning the microphone clip easy. The stand's simple elegance loses nothing by the addition of König & Meyer's classic swivel arm. The height of the stand can be adjusted soundlessly, simply and easily using the unique one-hand clutch. The stand is significantly lightweight, but nonetheless stable due to the ingenious round base with an integrated steel plate with an attractive plastic cover. The base's circumferential rubber profile reduces undesirable vibration and footfall noise even when the stand is tilted far over to the side. Damage to flooring (e.g. parquet) is also prevented.

Consists of tubing assembly and extendable boom arm. Zinc die-cast base with long folding legs. Square swivel joint with large wing nut.

Attaches to stands with diameter from 15 to 22 mm. With prismatic clamp connector. Comes complete with adjustable and swiveling boom arm with 3/8" thread.

Mobile heavy steel microphone stand for studio or stage. 10 kg cast metal base, low centre of gravity for high level safety with 3 lockable castor wheels. Rod combination extends to over 2 m with additional locking mechanism. Extendable boom arm with a 3 kg counterweight and 5/8" connecting thread. Additional mini boom arm with 5/8"- and 3/8"- connecting thread, fully adjustable regardless of the position of the main boom arm, e.g. to use with studio microphones.

Beautifully designed, compact, zinc die-cast base. 3-pin XLR connections (male/female), completely mounted, crackle-free switching, with phantom powering-pilot light, with switch (gray). Two diodes indicate the operating state (voltage / microphone ON/OFF).

Perfect presentation and function: this heavy duty, large round base microphone stand is impressive both for the studio and on stage. The robust and tall tubing combination with the slim clutch provide a very tight and secure connection. A full circle anti-vibration rubber damping ring prevents unwanted floor vibration impacting the sound. The formidable base scores additional points for its clean design, visually appealing plastic covering and advanced functionality - and the integrated metal plate makes the stand extraordinarily stable. In addition, due to the extremely solid and stable base, an extendable boom arm can also be installed on the stand.

The K&M 25900 Soft-Touch microphone boom stand makes it easy to mic low- to mid-height sound sources, while keeping your microphone's position very stable. The 25900 Soft-Touch stand comes with a handy 2-piece boom arm for accurate positioning, and its foldable legs give it a sturdy, solid base as well as convenient portability. Finished in a durable and classy gray powdercoat, this stand is built to take the rigors of the road and the exacting demands of the studio alike. You'll also appreciate the light weight (4.85 lbs.) of the 25900 Soft-Touch stand.

Consists of tubing assembly and extendable boom arm. Zinc die-cast base with long folding legs. Square swivel joint with large wing nut.

Extra low design for bass drums or special use. Die-cast base with folding legs. Comes complete with boom arm.

The K&M 23280 Transparent Glass Round Base is a stylish microphone stand with a rubber-lined base that absorbs vibration and minimizes noise. The base measures 4.3" (110mm) in diameter and features a 2.75" (70mm) microphone mount with a 3/8" stud.

This exclusive microphone arm with a 3/8" or 5/8" thread connector in a modern design with a new innovative table clamp for quick and easy positioning of a microphone in the studio or at a multimedia work station. The 236.22" long internally guided microphone cable has a 3 pin XLR plug connector. Microphones to max. 3.307 lbs are easily held in any position. The clamping width of 0 to 2.087" allows the clamp to be attached to a wide variety of surfaces. The stable metal construction with high quality plastic inserts guarantees secure and strong hold. The cleverly shaped clamping parts allow the clamp to be used on smooth surfaces and round-shaped tubes. The microphone arm can also be fixed with the table flange 23855 available as an optional extra.

The telescopic microphone stand with a 3/8" threaded connector is extremely versatile. Its height can be adjusted from 230 to 400 mm using the practical clamping lever. This light-weight three-legged stand with folding legs is suitable for mobile operation. The robust foot end caps provide stability and reduce undesirable transmission noise.

There is a difference between pop filters! Here are four good reasons to choose DPA's exclusive pop filter:MountingThe DPA pop filter is mounted between the mic stand and the mic holder. It will always follow any movement of the microphone. Its adjustability in distance and angle makes it suitable for all microphones.Sound qualityYou won't hear this pop filter! The pop-screen does not attenuate the higher frequencies beyond the tolerance field of the microphone's frequency response.Wind protectionThe DPA pop filter is one of the most efficient pop reducing products on the market today.Durability The DPA pop filter is a stainless steel construction and will not wear out like a gooseneck. The screen can be replaced if necessary.

Inexpensive stand with professional features. Fiberglass-reinforced plastic base with foldable legs. Complete with boom arm.

K&M 25935 Small Boom Mic Stand - perfect for bass, drums, guitar amps etc. Specifications: Adjustable telescopic bar (460-765mm) Height: 260mm Weight: 1.4kg Colour: Black

Round base for stacking up to 6 stands, black, height 106 cm - 179 cm, weight: 3,4 kg

Lightweight plastic moulded table stand, suitable for all microphones with 19mm diameter

Solid metal table stand with 3/8' thread for mounting microphones and other equipment 

With black lacquered cast iron base of Ø 10,5 cm and a black steel pipe with a screw base of 5/8” and a height of 10 cm. color : black Weight 1 kg 

Consisting of the ST301B and a standard boom arm, ST310 with a length of 84 cm. Includes cable fixation claps and 5/8" to 3/8" thread reduction. Height adjustable from 89 to 160 cm. Base spread diameter : 65 cm Screw base 3/8” Weight 3.5 kg. 

Easy running microphone desk arm with 3/8" or 5/8" thread for studios and multi-media workstations; black powder-coated. Easy to handle. The microphone arm keeps the position which you select. The included screw-on clamp (adjust-able up to 2.17") or the additional available table flange offer a multi-purpose use. Max. load capacity 1.76 lbs. 197" microphone cable (3-pole XLR connection) is included.

Stable steel stand with broad completely level round cast-iron base-diameter 450 mm. Rod combination height adjustable using clamping screw and safety splint. Speaker will be fixed with flange adapter. Also available as monitor stand.

The industry standard for a mic stand and boom arm combination. Package consists of the 201A/2 microphone stand and the 211 boom arm. Folding base for ease of transport. Long legs for added stability. The 210/2 - a classic for 30 years. More than 2 million sold.

New extensible arm microphone stand featuring fixed elevation arm, fixed desktop stand and clip-on base desktop stand. Suggested for radio installations and dubbing studios. Available in matt black (DST260) finish.

Boom microphone stand with telescopic boom and folding tripod base.