Microphone accessories

The K&M 23280 Transparent Glass Round Base is a stylish microphone stand with a rubber-lined base that absorbs vibration and minimizes noise. The base measures 4.3" (110mm) in diameter and features a 2.75" (70mm) microphone mount with a 3/8" stud.

Extra low design for bass drums or special use. Die-cast base with folding legs. Comes complete with boom arm.

Consists of tubing assembly and extendable boom arm. Zinc die-cast base with long folding legs. Square swivel joint with large wing nut.

The new star in your show! The avant-garde, one-hand microphone stand is setting new standards in design and function. The elegant combination of triangular-shaped sections and the new design of the slender one-hand adjustment mechanism go harmoniously with standard microphone clips and microphones. The integrated knurled screw is impossible to lose and makes tightening and positioning the microphone clip easy. The stand's simple elegance loses nothing by the addition of König & Meyer's classic swivel arm. The height of the stand can be adjusted soundlessly, simply and easily using the unique one-hand clutch. The stand is significantly lightweight, but nonetheless stable due to the ingenious round base with an integrated steel plate with an attractive plastic cover. The base's circumferential rubber profile reduces undesirable vibration and footfall noise even when the stand is tilted far over to the side. Damage to flooring (e.g. parquet) is also prevented.

Perfect presentation and function: this heavy duty, large round base microphone stand is impressive both for the studio and on stage. The robust and tall tubing combination with the slim clutch provide a very tight and secure connection. A full circle anti-vibration rubber damping ring prevents unwanted floor vibration impacting the sound. The formidable base scores additional points for its clean design, visually appealing plastic covering and advanced functionality - and the integrated metal plate makes the stand extraordinarily stable. In addition, due to the extremely solid and stable base, an extendable boom arm can also be installed on the stand.

The telescopic microphone stand with a 3/8" threaded connector is extremely versatile. Its height can be adjusted from 230 to 400 mm using the practical clamping lever. This light-weight three-legged stand with folding legs is suitable for mobile operation. The robust foot end caps provide stability and reduce undesirable transmission noise.

This exclusive microphone arm with a 3/8" or 5/8" thread connector in a modern design with a new innovative table clamp for quick and easy positioning of a microphone in the studio or at a multimedia work station. The 236.22" long internally guided microphone cable has a 3 pin XLR plug connector. Microphones to max. 3.307 lbs are easily held in any position. The clamping width of 0 to 2.087" allows the clamp to be attached to a wide variety of surfaces. The stable metal construction with high quality plastic inserts guarantees secure and strong hold. The cleverly shaped clamping parts allow the clamp to be used on smooth surfaces and round-shaped tubes. The microphone arm can also be fixed with the table flange 23855 available as an optional extra.

K&M 25935 Small Boom Mic Stand - perfect for bass, drums, guitar amps etc. Specifications: Adjustable telescopic bar (460-765mm) Height: 260mm Weight: 1.4kg Colour: Black

Inexpensive stand with professional features. Fiberglass-reinforced plastic base with foldable legs. Complete with boom arm.

Ball-shaped foam windscreen (black). Fits Audio-Technica Case Style(s): S7, T1, T4, T6, T7.

Small foam windscreen for ATM73 models (black). Fits Audio-Technica Case Style(s): M5.

Large ball-shaped foam windscreen (black).

Shotgun windscreen (black).

Large studio foam windscreen (black).

Small foam windscreen (black).

Black foam windshield used with the AT8418 gooseneck clip-on mount for use with the ATM350 and PRO35 instrument microphones.

Round base for stacking up to 6 stands, black, height 106 cm - 179 cm, weight: 3,4 kg

Shield your microphone against wind and moisture with this Sennheiser MKW 4 foam windscreen that fits Sennheiser MK4 condenser microphones.

Foam windshield for MD 21 and MD 421

Foam windshield for use with MD 425, MD 431 and all Evolution 800 & 900 Series

Lightweight rugged protective basket windshield for MKH 60 and MKH 416 

Foam windshield for MD 441

Lightweight protective basket windshield for MKH-70-1

Solid metal table stand with 3/8' thread for mounting microphones and other equipment 

Lightweight plastic moulded table stand, suitable for all microphones with 19mm diameter

Foam windshield for SKM 100/300/500

Velour foam windshield for MKH 70 lenght: 320mm Diameter: 70mm

Used in conjuction with MZW 60-1 

Velour foam windshield for use with MKH416 & MKH 60 Lenght:188mm Diameter: 68mm

Foam windscreen for Shure's SM94, 849, BG4.1, KSM109/SL, and PG81 microphones.

The Shure A32WS Windscreen is designed with acoustically transparent foam to reduce unwanted breath and wind noise without affecting the sound quality. It is particularly effective in reducing pops and ticks caused by talking or singing closely into the microphone as well as reducing wind noise when using the microphones in outdoor applications. For use with Shure KSM27, KSM32 and KSM44 microphones.

The Shure A202BB Desk Stand is designed to permit using the Shure Model MX202 Overhead Microphone on a flat horizontal surface.

Reduces unwanted breath and wind noise. For use with Shure Microflex Gooseneck Microphones. Available in black.

Foam windscreen for SM85, SM86, SM87A, Beta

The Shure A58WS Windscreen is designed with acoustically transparent foam to reduce unwanted breath and wind noise without affecting the sound quality. It is particularly effective in reducing pops and ticks caused by talking or singing closely into the microphone as well as reducing wind noise when using the microphones in outdoor applications. For use with all larger Shure "ball-type" microphones including the SM58, Beta58A, SM48, and the 565SD microphones.

Foam wind shield for ΝΤ-1Α, ΝΤ-2Α, ΝΤ-1000, ΝΤ-2000, ΝΤΚ, Κ2, BroadCaster microphones.

Foam wind shield for NT-5 and NT-6 microphones.

The RODE WS6 Deluxe Windshield is designed to reduce wind noise when recording in adverse environmental conditions.Suitable for the RΨDE NTG-1 and NTG-2, as well as any shotgun microphone with a maximum slot length of 160.5mm (6 1/4') and a diameter of 21-22.5mm.

Consisting of the ST301B and a standard boom arm, ST310 with a length of 84 cm. Includes cable fixation claps and 5/8" to 3/8" thread reduction. Height adjustable from 89 to 160 cm. Base spread diameter : 65 cm Screw base 3/8” Weight 3.5 kg. 

With black lacquered cast iron base of Ø 10,5 cm and a black steel pipe with a screw base of 5/8” and a height of 10 cm. color : black Weight 1 kg 

Easy running microphone desk arm with 3/8" or 5/8" thread for studios and multi-media workstations; black powder-coated. Easy to handle. The microphone arm keeps the position which you select. The included screw-on clamp (adjust-able up to 2.17") or the additional available table flange offer a multi-purpose use. Max. load capacity 1.76 lbs. 197" microphone cable (3-pole XLR connection) is included.

Stable steel stand with broad completely level round cast-iron base-diameter 450 mm. Rod combination height adjustable using clamping screw and safety splint. Speaker will be fixed with flange adapter. Also available as monitor stand.

The industry standard for a mic stand and boom arm combination. Package consists of the 201A/2 microphone stand and the 211 boom arm. Folding base for ease of transport. Long legs for added stability. The 210/2 - a classic for 30 years. More than 2 million sold.

Καλάμι boom 0,84 έως 3m. 850gr με standard πάσσο 3/8

New extensible arm microphone stand featuring fixed elevation arm, fixed desktop stand and clip-on base desktop stand. Suggested for radio installations and dubbing studios. Available in matt black (DST260) finish.