Amplifiers

Technics SU-C700EG-S

Premium Class Amplifier Employs innovative fully-digitised processing that delivers a pure and accurate signal to the speakers. Stereo Integrated Amplifier SU-C700 JENO Engine (Jitter Elimination and Noise-shaping Optimization) Just like the R1, the SU-C700 is a fully-digital amplifier and delivers high-resolution digital signals without any distortion being introduced between the input stage and output to the speakers. Technics has developed an original jitter-reduction circuit, avoiding the sound quality degradation due to jitter common to conventional digital amps. It uses a clock generator for the noise-shaping system to reduce jitter in the low-frequency range and a high-precision sample rate converter to suppress jitter in the high-frequency range. LAPC (Load Adaptive Phase Calibration) Technics has developed a speaker impedance optimisation algorithm, using digital signal processing to flatten both the amplitude and phase-frequency response to make the most of your speakers. The result is a sound with better focus, spaciousness and definition. High-speed Silent Linear Power Supply Using a large-current Schottky-barrier diode, a rectifier circuit with electrolytic capacitors, and a stabilised power supply circuit, the SU-C700 ensures ample power supply at all times, even when dynamic music demands high current. Battery Driven Clock Generator Technics used battery power for low-noise applications in analogue amplifiers in the past: here, this same technology is used to improve digital clock precision, enhancing the definition of the sound. High Rigidity Metal Double Chassis To reduce vibration and noise that degrade the purity of sound, the Premium Series features a High Rigidity Metal Double Chassis, using inner and outer steel plates. Various Inputs The SU-C700 supports a wide range of inputs, such as SPDIF, Analogue and Phono, as well as USB-DAC for connection of a PC. The digital input terminal supports coaxial 192-kHz/24-bit PCM and optical 96-kHz/24-bit. The USB DAC input terminal supports 192-kHz 32-bit PCM and 2.8-MHz/5.6-MHz DSD native playback (analogue output) and asynchronous transmission. The SU-C700 converts analogue signals to high-precision 192-kHz/24-bit PCM signals using the A/D converter. The full-digital system achieves high-purity reproduction from any content.

1.299 €

Onkyo TX-NR696 7.2 Black

THX® Certified Select™ cinema-reference sound THX Certified Select guarantees the same reference volume and sound quality of at a commercial cinema in rooms where the viewing position is about 3.5 m from the screen. To deliver THX reference movie sound, receivers must pass 2,000 bench-tests in 75 categories covering 14,000 data points. Dolby Atmos® and DTS:X® – setting sound free Dolby Atmos® and DTS:X® formats allow engineers to map sound anywhere in 3D space, effects moving from speaker to speaker all around the room and wrapping your audience in the latest films and games. You can also enjoy your 3D speaker layout with classic titles. Dolby Surround® and DTS® Neural:X find overhead cues in legacy soundtracks and upmix for awesome spatial realism. Dolby Atmos Height Virtualizer When playing any Dolby® format, engaging Dolby Atmos Height Virtualizer* enables a more immersive listening experience, creating a virtual surround and height effect from traditional speaker layouts without employing additional surround or height speakers. * Enabled with a future firmware update. Flexible 3D sound with DTS Virtual:X™ DTS Virtual:X* is a surround virtualization technology that creates an immersive 3D sound-field from horizontal speaker layouts without requiring height-speaker connection. It uses DSP algorithms to create a sense of 3D spatiality and is effective in rooms of any size and shape. DTS Virtual:X works with DTS:X, DTS® formats, and non-encoded stereo soundtracks. * Enabled with a future firmware update. Dynamic Audio Amplification Refined over 70 years to deliver an emotional listening experience, DAA features a custom High-Current Low-Noise Power Transformer, customized capacitors, and discrete amp output stage. Unique circuit topology prevents phase-shift for accurate sound, while high current improves speaker control for thrilling dynamics. Driving 4-ohm loads through all channels, DAA has power to move you. Key design enhancements improve sound While cosmetically familiar, the TX-NR696 has significant upgrades inside that control noise, boost driving power, and improve S/N performance. A new HDMI® board features larger, stronger, better-finished grounds and shortened signal-paths to reduce noise on A/V signals. New SoC processor has its own board remote from audio signal-paths to reduce noise. Power-supply line has been strengthened in pursuit of driving power, while the Front (L/R) and Center amps now feature two transistors each, effectively doubling current-handling capabilities. You can hear the result in the blistering attack speed and force of the bass, and in the clearer separation and localization of instruments across a large and spacious soundstage. Next-Generation Network Audio Access streaming content from Amazon Music, Spotify®, TIDAL, Deezer, and TuneIn and share network audio around your home as part of a multi-room system via Works with Sonos, Chromecast built-in*, AirPlay 2, DTS Play-Fi®, and FlareConnect™. * The unit may automatically download and apply an Over-the-Air software update during setup. Works with Sonos The TX-NR696 can join your existing Sonos Home Sound System, or be the start of a new one, just by pairing it with a Sonos Connect*. The AVR ties into the Sonos ecosystem, waking, changing inputs, and playing at the desired volume on command from the Sonos app*. * Sonos Connect sold separately. Sonos app is available free for iPad, iPhone, and Android™ at the App Store and Google Play. Please check device and OS compatibility before installation. Chromecast built-in* with the Google Assistant Stream any music from your smartphone, laptop, or PC to the receiver with ease. Control playback with Chromecast-enabled apps you know and love from your iPhone, iPad, Android™ phone or tablet, Mac or Windows® laptop, or Chromebook™. If you have a smart speaker featuring the Google Assistant, you can cue, play, and control music playback by voice. * The unit may automatically download and apply an Over-the-Air software update during setup. Quad-core SoC supports 802.11ac Wi-Fi® A quad-core SoC (System on a Chip) has power to perform multiple processing tasks at once. It evolves network functions and supports the latest high-speed 802.11ac (2x2 MIMO) specification while compatible with 802.11b/g/n dual-band routers. Note: Some countries or regions have regulations that affect wireless signal strength and the use of Wi-Fi channels. Share audio flexibly in Zone 2 The TX-NR696 supports flexible 3D-ready 5.2-ch cinema surround speaker layouts with two channels to spare for playback in another room. Zone 2 outputs distribute amplified analog, NET, Bluetooth®, SPDIF, and HDMI audio sources in either or both zones at the same time (there’s a Zone 2 DAC). Output from Zone 2 and Zone 2 line-out is enabled. * HDMI and SPDIF supports PCM audio only. HDMI audio available on inputs 1–3. Share audio or listen privately Connect an audio system via analog RCA input and the AVR’s Zone 2/Zone B line-out. With Zone 2, you can play the same or different analog/digital sources (including SPDIF and HDMI) in either or both rooms at the same time. Zone B is ideal for connecting a compatible transmitter so you can listen to any source—including the TV—through wireless headphones, perfect for midnight movies and TV. Hi-fi buffs will love the ability to pass Front L/R signals to an outboard power amp in Front Pre-Out mode, and personalize the sound character through their favorite speakers. Clearer dialog at the touch of a button This technology solves inaudible dialog in TV programs and movies. DSP-controlled Vocal Enhancer identifies voice frequencies so you can raise or lower them with keys on the remote or via the controls on the front panel. Relax with Stereo Assign Mode At the touch of a button, Stereo Assign Mode switches playback from Front speakers to either Surround, Rear Surround, or Height speaker pairs. Ideal for ambient listening, BGM, or any time you want to create a relaxing atmosphere. AccuEQ Room Acoustic Calibration with AccuReflex™ AccuEQ creates a harmonious sound-field in your room. It detects speaker presence, size, impedance, and distance from a measurement position, and sets sound-pressure levels. It then selects the subwoofer crossover and EQ’s all speakers, including the sub. AccuReflex optimizes 3D audio reproduction through Dolby Atmos-enabled speakers. It resolves phaseshift that arises from path differences between directional and non-directional sounds. Enjoy a cohesive 3D sound-field with vertical movement and overhead dimensionality. For more specifications, see the datasheet in the downloads tab.

799 €

Deal

Denon AVR-X1700H 7.2 Black

Designed for 4K or 8K setups, the AVR-X1700H delivers the ultimate 3D audio home theater/gaming experiences and supports the latest HDMI specifications. Powerful, discrete 7-channel amplifier Delivers maximum performance and 80W per channel to provide the classic and dynamic Denon sound experience. Advanced 8K HDMI video with eARC support Three 8K inputs support the latest HDMI specifications—8K/60Hz, select 4K/120Hz pass-through, VRR, Dolby Vision™, HDR10+, ALLM. Full 3D audio support with virtual surround sound Enjoy immersive 3D audio with Dolby Atmos®, Dolby Atmos Height Virtualization Technology, DTS:X®, and DTS Virtual:X™. Enhanced gaming experiences Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM) care for amazing imaging as well as reduced lag and latency.

798 ,87 €

Elipson Music Center Connect HD

The Music Center Connect HD is Elipson’s newest receiver which is now equipped with a Wi-Fi connection. DESCRIPTION Then you will be able to enjoy all the music from streaming platforms (Qobuz, Spotify, Tidal, Deezer, Internet Radio …) or from your stored music files. This class-D amplifier features ICE Power technology. Its power rating is largely sufficient (2x120W), and a comprehensive range of connections is included. In addition to standard inputs and outputs, the Music Center BT HD features an optical input, a Wi-Fi connexion playing Hi-Res audio files (Solo mode) or playing CD quality audio files (Muti-room mode). It is also compatible with the Apt-X HD protocol, which enables playback of high-resolution files up to 24-bits, and a pre-out connection for a power amplifier. A subwoofer may be connected to the SUB output. This output features an adjustable filter which covers frequencies between 50 and 200 Hz, thus guaranteeing optimal compatibility with the main speakers. The touch user interface is situated under the CD slot. The RDS FM tuner adds the finishing touch to this very versatile receiver. To enjoy optimal integration into your living room decor, a specially designed stand featuring a cable path is also available. Simply put, this is one of the rare ultra-connected circular receivers to offer a truly exceptional audiophile-grade listening experience. The Music Center Connect HD is perfectly compatible with the other products of the ELIPSON CONNECT range. SPECIFICATIONS: Amplifier: ICEpower ® 2 x 120W / 4Ω Internal DSP 32bit / 192kHz Radio: FM / DAB / DAB+ with 40 memories   CD player: MP3 / WMA / CDText Compatible   Bluetooth input: SBC, AAC, aptX, aptX HD Codecs   Auxiliary inputs: 2x stereo RCA - 0.55V sensitivity 1x stereo minijack - 0.13V sensitivity   Optical input: TOS LINK input - up to 96KHz   Subwoofer output: 1x RCA output with variable crossover (50 ~ 200 Hz / 12dB/oct) 8V sensitivity   Pre-output: 1x stereo RCA output - 8V sensitivity   USB: Compatible MP3 / WMA + 1A load current   Audio streaming: FLAC,WAV,ALAC,AAC,AAC+,MP3 codecs up to 24bit / 96kHz   Network: Wi-Fi 2,4GHz IEEE 802.11 b/g/n Ethernet Audio multiroom up to 10 rooms, depending on the quality of the network   Power supply: 100-120 / 220-240V - 200W   Operating temperature range: -5 to 40 ºC

875 €

Mola Mola Kula

ANALOGUE DESIGN FOR A DIGITAL AGEWith the knowledge in hand to design minimally invasive electronics without needing to be minimalist, we decided that our preamp should be complete. Very complete. The basic Makua is an extremely transparent gain stage and a programmable routing matrix. The chassis has ample room to fit optional extras, most notably a DAC and a phono stage. The 6 preset buttons are programmable via USB or Bluetooth to access any combination of channel, processing and routing. In a system with mainly digital sources, the preset buttons would be programmed to select between them.   Vinl lovers on the other hand might want to use several buttons to select the same turntable but with different EQ settings to suit their large collection of historic LP's. All five inputs are switchable between XLR and floating RCA connections, and all can be assigned as either phono or line. All stages in the Makua use discrete amplifier modules in a little known topology called “single-ended driven differential”. Compared to doubly executed signal paths, this structure prevents noise from propagating all the way through.   The Makua is amazingly immune to influences like mains quality and choice of interlinks. The relay-based volume control directly controls the gain of the output stage. Dynamic range and linearity of this arrangement is much greater than those of stepped attenuators. Operation is smooth and entirely glitch free. I/O5 balanced and 5 unbalanced inputs, all routable through optional processor boards like the phono stage.2 parallel outputs for bi-amping.4 programmable trigger outputs.​ProcessingBalance and input gain offset.Phase invert and mono sum.Full software control of routing and processing​PerformanceMaximum input/output level: 20 dBu (7.75 Vrms)Unweighted noise voltage at unity gain: 1.9 uVInput impedance: 100 kohmOutput impedance: 44 ohmDistortion at maximum signal level (THD, IMD): not measurable, estimated around -150dB.Bandwidth >200 kHzGain range: -70 dB to +15 dB.Gain resolution:

10.990 €

Denon DRA-800H Black

Denon DRA-800H two-channel Hi-Fi network receivers high quality audio performance listening to analogue and digital sources. With FM/DAB+ radio, a wide array of connectivity including Phono input, network integration and HDMI you will upgrade your listening and home theatre experience. Featuring advanced custom amplifier design and a strong power supply, the DRA-800H ensures your loudspeakers drive detailed, precise imaging and impactful sound. With 4K Ultra HD HDMI and the latest wireless music streaming technologies (Wi-Fi, AirPlay 2, Bluetooth and HEOS Built-in), the DRA-800H integrates seamlessly with your TV, music services and Hi-Fi system. Enjoy network streaming and USB front-panel audio playback of MP3, WAV, FLAC, ALAC and DSD (2.8/5.6MHz) files. Equipped with A/B speaker terminals, dual subwoofer pre-outs, three digital and two analog inputs, one phono (MM) input and ARC for TV audio, the DRA-800H delivers a premium stereo listening experience for your music collection and home theatre viewing. Bluetooth Headphone Transmission: Use Bluetooth headphones to listen to audio playing through your device. Playback can be performed simultaneously on the speakers and Bluetooth headphones or on the Bluetooth headphones only depending on the needs. Two-channel Hi-Fi network receiver with 100W per channel: Enjoy Denon Hi-Fi sound seamlessly integrated with the latest receiver technology Expert sound engineering: Carefully selected Hi-Fi parts, dedicated circuitry with short, straight paths between power supply, signal and amplification to deliver a premium audio experience Denon Hi-Fi amplifier: Discrete amplification for left and right channels — feel the power and hear every detail as the artist intended with 100W power per channel (8 ohm, 20Hz – 20kHz, THD: 0,07%, 2ch driven) Integrated phono input and MM equalizer: Directly connect your turntable and enjoy the world of vinyl FM analogue radio and digital DAB+: Listen to the full bandwidth of local radio stations without the need of network connection  Hi-Res audio certified: Network and front panel USB allows for gapless playback of high-resolution audio including 192kHz/24bit FLAC, WAV, ALAC and DSD 2.8/5.6MHz  Supports Spotify, Amazon Music, TuneIn, Deezer and more: Wirelessly stream and enjoy the most popular music services HEOS Built-in wireless multi-room music streaming technology: Listen from any room for a connected, whole-home audio experience Amazon Alexa, Google Assistant and Apple Siri voice control: Use your voice to control the DRA-800H and wireless music services hands-free Direct access tone control and direct mode: Fine-tune your treble, bass and balance audio settings for pristine listening Premium DAC: Hear the fine details of your music with the 32-bit 8ch AKM DAC — operates in double differential mode to deliver high-resolution audio decoding with multiple lossless files  4K/60 Hz, HDR10, HLG, 4:4:4 colour resolution and BT.2020: Provides the greatest video quality with exceptional brightness, contrast and colour Award-winning Denon Setup Assistant and graphical user interface: Easy and intuitive out-of-box setup experience Smart TV compatibility: Easily control the DRA-800H with most TV remotes via HDMI-CEC Analog and digital audio inputs: No limitations connecting all your sources Speaker A/B and Zone 2 pre-out: Connect two pairs of speakers for easy A/B switching, or extend your system to a second room and listen to a different source in Zone 2 via pre-outs  Four Quick Select Buttons: Featured on the front panel — store your preferred audio settings for each source HIGH-PERFORMANCE DISCRETE 2-CHANNEL AMPLIFIER The DRA-800H Hi-Fi network receiver amplifier is specifically designed to meet the needs of your two-channel system. Featuring a custom discrete high-current power amplifier, symmetrical design and an OFC (oxygen-free copper) winding power transformer, the DRA-800H delivers maximum performance and 100W of power per channel (8 ohm, 20Hz – 20kHz, THD: 0,08%, 2ch Driven). With low impedance drive capability, it offers greater stability with a wide range of floor-standing and bookshelf loudspeakers for balanced, quality sound, every time. Auto ECO mode helps reduce power consumption, without sacrificing audio quality.

899 €

Naim Uniti Atom (HDMI)

Uniti Atom is a beautiful, compact multi-source music player that will seduce you with its amazing sound quality and outstanding feature-set. Its 40-watt integrated amplifier and high-resolution music streaming capabilities will fill your home with stunning high-fidelity sound. Uniti Atom is perfect as a high-end main system or even for use in the kitchen or study, where space is at a premium. Just add speakers. Our Naim App for iOS and Android combines all of your music sources in one place, making Uniti Atom even more appealing.

2.899 €

Deal

Musical Fidelity M2si Black

The M2si integrated amplifier takes our peerless premium-amp experience and applies it to a more affordable price point. It boasts trickle-down technology from our mighty and legendary Titan flagship, plus other high-end touches such as solid metal controls. The M2si delivers 76 watts per channel into 8 ohms and 137 watts into 4 ohms. This means the M2si will drive a wide range of speakers, even power-hungry models. Further flexibility is provided by the M2si's excellent connectivity, which includes six line-level inputs and switchable home-theatre throughput. It features a Class A preamp stage with its own, independant power supply, coupled with a discrete pair of power amps. In effect, this means the M2si offers the performance benefits of a pre/power configuration with the compact convenience of a one-box design. Its performance is rock-solid, it's sonically well-rounded and it's comfortable with a wide array of speakers. And it's all served up in an elegant, no-nonsense package. Specifications: Output Power 72 Watts per channel into 8 Ohms (18dBW) Voltage 22 Volts RMS, 20Hz to 20 kHz; onset of clipping 62 Volts peak to peak Current 25 Amps peak to peak Damping factor 36 Output devices 1 pair per channel Line input THD+N < 0.014 % typical, 20Hz to 20 kHz Signal / noise ratio > 96dB ‘A’-weighted Input impedance 40 k Ohms Frequency response +0, –0.1dB, 10Hz to 20 kHz Connections Line level inputs 6 pairs line level RCA connectors Line level outputs 1 pair line level RCA connectors, constant level TAPE outputs 1 pair line level RCA connectors, preamp outputs for e.g. bi-amping Speaker outputs 2 pairs 4mm banana plug/binding posts Power requirement Mains voltages 115/230VAC 50/60Hz (factory pre-set) 100VAC 50/60Hz (alternative) Consumption 320 Watts maximum Weight Unit only, unboxed 9.2 kg (20¼ lbs) In shipping carton 13 kg (30⅔ lbs) Dimensions Wide 440 mm (17⅓”) High, including feet 100 mm (4”) Deep (front to back) including terminals 400 mm (15¾”)

799 €

Naim Nait 5Si

The NAIT 5si is our 60W per channel introduction to high-performance integrated amplification. Another Naim Audio amplifier that can claim a common heritage with our classic NAIT model, the NAIT 5si will get straight to the heart of your music. It engages even the most complex rhythms and demanding dynamics with all the grip and authority you would expect from us.Its clever AV bypass mode, which facilitates an easy co-existence of otherwise distinct AV and hi-fi systems, simply adds to its appeal.Features:60W per channel power outputFour inputs with support for both DIN and RCA connections1/4” (6.35mm) headphone outputAV bypass mode for simple connection to an existing AV systemDecades have passed, but the role of the NAIT 5si is fundamentally the same as its original forebear. So the engineering challenge - to maximise performance whilst maintaining engineering efficiency, quality and reliability - hasn&#39;t changed. Amplifier technology has moved on considerably however, and while the NAIT 5si occupies the same position in the Naim Audio range as the original NAIT, its performance might be from a different world.The NAIT 5si provides four analogue inputs and a 60 Watt per channel power amplifier. It borrows numerous technologies from across the spectrum of Naim Audio products; all dedicated towards maximising its ability to communicate the fundamentals of music. And communicate it does. The NAIT 5si brings clarity, engaging dynamics and, most of all, infectious enthusiasm to every music source and genre.Specifications:Input Sensitivity: 150mVInput Impedance: 20kΩAnalogue Input: 2 x DIN, 4 x RCALine Outputs Fixed (level): 150mV, 600ΩAudio Outputs: Speakers, HDDOther Outputs: Headphone, 1/4" jackPower Output: 60W/channel, 8ΩTransient: 300VARemote Control: Infra Red (RC5)Front Panel: Volume Control, four button matrixMains Supply: 100V, 115V, 230V; 50 or 60HzPower Consumption (max.): 300VAPower Consumption (quiescent): 19VADimensions (HxWxD): 70 x 432 x 301 mm Weight: 6.8 kgShipping Dimensions: 200 x 590 x 500 mmShipping Weight: 8.6 kgSupplied with: NARCOM-4 Remote ControlFront: Black powder coatedCase: Black powder coated

1.490 €