Microphone Accesories

K&M 23600 Microphone Bar - Black

Standsteel ST-MC1480 - Professional floor stand with XLR connector for gooseneck microphones. It has a hidden internal cable management system, an adjustable height of 1 - 1.48m and a round base with a diameter of 35cm. It is made by steel to offer great stability.Weight: 5,4kg

Microphone stand made from steel with adjustable height up to 1.50m

Microphone clip mounts a handheld transmitter.

Black tripod floor stand for microphone, with horizontal arm. Arm length: 750mm Minimum height: 790mm Maximum height: 1450mm Weight 2.7kg

Prodipe clamp for BL21 Contrabass micThis clamp is only compatible with BL21 Contrabass mic

One-Hand Microphone Stand.

Description Dent-resistant grille replaces Beta 58A wired and wireless microphone grilles.

More room for maneuvre! The flexible universal joint can be used on practically any microphone stand and gives you more freedom than ever by providing maximum flexibility for positioning a range of equipment such as microphones, hand-held recorders, etc. Included are a 3/8" female thread and 1/4" male thread. The integrated thread adapter allows for even more combinations. 

Βασικά χαρακτηριστικά :Κλιπ ασύρματου πομπού GO για ρούχαΤο μαγνητικό κλιπ κρατά τα ρούχα στη θέση τουςΠαρέχει πλήρη ευελιξίαΜετατρέψτε τον ασύρματο πομπό σας GO σε ένα κομμάτι φορητής τεχνολογίας με το RODE MagClip GO, ένα μαγνητικό κλιπ που σας επιτρέπει να τοποθετήσετε τον πομπό σε σχεδόν οποιοδήποτε ρούχο. Στηρίξτε τον πομπό σε γραβάτα, γιακά πουκάμισου και άλλα.

Microphone Stand With noise reductive cast-iron base Height adjustable from 87 to 157 cm Weight: 3.6 kg Colour: Pure white

Prodipe clamp for CL21 Cello mic This clamp is only compatible with CL21 Cello mic

Inexpensive stand with professional features. Fiberglass-reinforced plastic base with foldable legs. Complete with boom arm.

Universal thread adaptor 5/8" male to 3/8" female for microphone stands

Small professional ABS microphone holder (Ø Min-Max: 18 - 22 mm).

ABS microphone holder with fi xing clip, ideal for drum microphoning. On the APM47 can be applied all PROEL microphone holders.

Big professional ABS microphone holder (O Min-Max: 32 - 39 mm).

Black microphone holder with ABS body 22-26mm

The K&M 25905 Low Profile Kick Drum Mic Stand is a kick drum mic stand, featuring a low profile, an adjustable bar, and an adjustable height from 380-600mm. The bar on this microphone stand can be adjusted from a length of 460mm to 765mmSpecifications:Kick drum mic standLow profileAdjustable bar: 460-765mmAdjustable height: 380-600mmWeight: 1.4 kg

Shure RK 143 G original replacement grill for SM58 Microphone.

Special rubber microphone holder (Ø Min-Max: 22 - 26 mm).

The MZH 3015 is a metal gooseneck for use with the ME 34, ME 35 and ME 36 microphone heads. The rugged, matte black gooseneck is fitted with a balanced, floating XLR-3 output, enabling the microphone to be powered from 12 – 48 V phantom power. Length: 150 mm.

Attaches to stands with diameter from 15 to 22 mm. With prismatic clamp connector. Comes complete with adjustable and swiveling boom arm with 3/8" thread.

The K&M 25900 Soft-Touch microphone boom stand makes it easy to mic low- to mid-height sound sources, while keeping your microphone's position very stable. The 25900 Soft-Touch stand comes with a handy 2-piece boom arm for accurate positioning, and its foldable legs give it a sturdy, solid base as well as convenient portability. Finished in a durable and classy gray powdercoat, this stand is built to take the rigors of the road and the exacting demands of the studio alike. You'll also appreciate the light weight (4.85 lbs.) of the 25900 Soft-Touch stand.

Consists of tubing assembly and extendable boom arm. Zinc die-cast base with long folding legs. Square swivel joint with large wing nut.

Extra low design for bass drums or special use. Die-cast base with folding legs. Comes complete with boom arm.

Perfect presentation and function: this heavy duty, large round base microphone stand is impressive both for the studio and on stage. The robust and tall tubing combination with the slim clutch provide a very tight and secure connection. A full circle anti-vibration rubber damping ring prevents unwanted floor vibration impacting the sound. The formidable base scores additional points for its clean design, visually appealing plastic covering and advanced functionality - and the integrated metal plate makes the stand extraordinarily stable. In addition, due to the extremely solid and stable base, an extendable boom arm can also be installed on the stand.

Consists of tubing assembly and extendable boom arm. Zinc die-cast base with long folding legs. Square swivel joint with large wing nut.

Mobile heavy steel microphone stand for studio or stage. 10 kg cast metal base, low centre of gravity for high level safety with 3 lockable castor wheels. Rod combination extends to over 2 m with additional locking mechanism. Extendable boom arm with a 3 kg counterweight and 5/8" connecting thread. Additional mini boom arm with 5/8"- and 3/8"- connecting thread, fully adjustable regardless of the position of the main boom arm, e.g. to use with studio microphones.

K&M 25935 Small Boom Mic Stand - perfect for bass, drums, guitar amps etc. Specifications: Adjustable telescopic bar (460-765mm) Height: 260mm Weight: 1.4kg Colour: Black

Inexpensive stand with professional features. Fiberglass-reinforced plastic base with foldable legs. Complete with boom arm.

Specially designed and easy to use double-sided tape pads for the DPA Miniature Concealers. Store tape away from excessive heat and light.

Round base for stacking up to 6 stands, black, height 106 cm - 179 cm, weight: 3,4 kg

Stand adapter for C1000S incl. LED and/or WMS-mics.

Professional space-saving straight microphone stand with heavy stackable iron-cast base and nylon clutch-style height-adjustment. (Diameter: 255mm, Weight: 3,95kg, Minimum Height: 910mm, Maximum Height: 1650mm).ANTIVIBRATION BASE - Round base with innovative anti-vibration and scratch-proof design.IRON-CAST BASE - Sturdy iron-cast base for a firm stand on the floor.STACKING SYSTEM - The special design of the iron-cast base allows up to 6 stands stacking on top of each other.ONE-HAND HEIGHT ADJUSTMENT - Innovative spring-loaded locking system for an accurate and no-slip adjustment even with just one hand.SIMPLE AND GENIAL - Technical drawing of the new locking device to adjust height in a simple way.

Small ABS microphone holder 22-27mm

Big ABS microphone holder 27 - 31 mm

ABS microphone clip holder 20-32mm

Big ABS microphone holder 30-35mm

Microphone Clamp 

Microphone clamp for MD 441 

Shure 95B2207C PG58 Replacement Grille

Dual microphone mount for Shure 545 Series, SM57 and Beta 57A.

Shock Stopper isolation mount/swivel adapter, reduces transmission of mechanical noise and vibration by more than 20 decibels. Compatible with Shure models 849, SM81, SM94, VP64, KSM137, KSM141, or any 3/4 inch (1.875 cm) microphone.

 Camera shoe mount for FP5 Portable Receiver.