In Ceiling Speakers
Looking for a high performance affordable alternative to the “Contractor Quality” in-walls your builder might suggest? The Invisa 600 is based on our best-selling Invisa 650, with the same one-piece marble-infused unitized driver/frame/flange construction built around the same 6.5" driver. It also offers the same minimal footprint, which delivers the exceptional performance advantages of a 6.5" driver based system, in a compact size comparable to the size of most competitors' 5.25" systems. Of course, it also features a paintable MagneLock grille with an optional square grille available.Instead of our signature HVFR tweeter, the 600 incorporates a 1" pure titanium dome tweeter, which has a special silk surround. It is pivotable, of course. Its performance, while not quite that of our folded ribbon, is excellent and we believe the best of any dome tweeter available in in-wall, in-ceiling architectural products. Of course, a complex crossover is utilized to ensure seamless blending and voicing is signature GoldenEar all the way.
The GoldenEar Invisa HTR (Home Theater Reference) 8000 is a no-holds-barred ceiling-mounted L/C/R speaker that shares essential DNA with our critically acclaimed Triton Reference Towers. Equally suited to sophisticated home theaters and audiophile music systems, the HTR 8000 is the perfect choice for side- or rear-surround speakers in 5.1-channel or 7.1-channel systems and makes an ideal height-channel speaker for Dolby Atmos/DTS:X systems. The HTR 8000’s thoughtful design features a magnetically attached micro-perforated grille that covers all mounting hardware, allowing the speaker to seamlessly blend into most any environment. GoldenEar’s FocusField™ Technology uses drivers mounted at precisely calculated angles to create palpable, well-focused images across an expansive soundstage.The overall result is a large, open presentation with precise three-dimensional imaging that doesn’t just come from the ceiling but convincingly fills the entire room with realistic sound. For superior frequency response and remarkable clarity, the HTR 8000 combines GoldenEar’s Reference High-Velocity Folded Ribbon (HVFRTM) tweeter with an 8" high-definition, cast-basket bass/midrange driver. In addition, it employs a highly refined crossover network with a high-frequency equalization switch, assuring well-balanced sound in virtually any room.
The 1000 ICW6 in-wall and in-ceiling loudspeaker is a fully-integrated solution for a high-calibre Stereo and Home Cinema sound experience. Made in France, it brings together exclusive technology, such as the ‘W’ cone of its midrange/bass speaker driver and the pure Beryllium tweeter. The tweeter is also positionable and adjustable, for optimal adjustment to your listening room. The square and circular magnetic grilles supplied with the product are also ready to paint, ensuring they are completely unobtrusive. Meanwhile, installation is quick thanks to the patented Quick Install system. Featuring a rear dust guard and positioning handles to fix the loudspeaker into the mounting frame without the need for tools, 1000 ICW6 is an incredibly accomplished high-end product.This 1000 Series range of loudspeakers embodies Focal excellence for the most sensational—and discreet—listening experience.
Compact and high-performance, this 2-way speaker driver is perfect for covering any space exposed to environmental constraints. Its design, originally intended for a marine application, lends it a faultless longevity and robustness while meeting Focal's internationally renowned standards. In yachting, humid spaces or outdoors, Littora 200 ICW6 is the leading choice for discreet integration and wide sound coverage.
Compact and high-performance, this 2-way speaker driver is perfect for covering any space exposed to environmental constraints. Its design, originally intended for a marine application, lends it a faultless longevity and robustness while meeting Focal's internationally renowned standards. In yachting, humid spaces or outdoors, Littora 200 ICW8 delivers a generous bass, and is the perfect compromise for intensive use anddiscreet integration.
This subwoofer is the perfect partner in any system, offering power and dynamics, even at high volumes. The more there are, the more the effect is increased. Its very shallow mounting depth and its 10-inch (25.4cm) diameter make the product easy to conceal within a system. Like a dive watch, it has been rigorously developed to perfectlysuit being used in extreme conditions, such as yachting or for outdoor or indoor use at home. This speaker driver is characterised by excellence and versatility. The power and refinement of the Focal sound in all conditions, no compromise.
As a flagship product from the Focal yachting offering, the Littora 1000 ICW8 speaker driver is simply the best in its category and impeccable across the board. It boasts the latest Focal technologies to deliver a powerful and captivating sound, while preserving a sound signature inspired by Focal's floorstanding loudspeakers. Like a dive watch, it has been rigorously developed to perfectly suit being used in extreme conditions, such as yachting or for outdoor or indoor use at home. This speaker driver is characterised by excellence and versatility.
The highest performance. Unique for its type, the Littora 1000 ICW10 speaker driver is focused on power, offering features that are unrivalled in its category. Preserving a sound signature inspired by Focal floorstanding loudspeakers, this speaker driver is as at home being used for a celebration as for audiophile listening sessions.Like a dive watch, it has been rigorously developed to perfectly suit being used in extreme conditions, such as yachting or for outdoor or indoor use at home. This speaker driver is characterised by excellence and versatility.The Focal sound in all conditions, no compromise.
The CCM683 is a true high performance ceiling-mount speaker. The speaker features a 200mm (8in) woven blue Aramid fiber cone bass/midrange driver and an aluminium tweeter in a neat circular die-cast chassis. The tweeter’s housing pivots for adjustable off-axis treble response and the die-cast chassis provides extra rigidity that results in a cleaner, faster bass. The speaker also has a three-position EQ switch for a better off-axis response. The blue Aramid fiber cone means that the unit is well hidden behind the grille but still produces a remarkably clear and dynamic sound.
THE PERFECT HOME CINEMA COMPLEMENT300 ICA6 is an in-ceiling/in-wall loudspeaker fitted with a speaker driver angled at 35° that makes it perfectly adjustable to suit the position you are listening from. This removes any “shower effect”, for a high-quality sound experience. The angle also means that it can be positioned in several ways in the ceiling, including in corners, for fully discreet sound delivery. Using the product as a Dolby Atmos® / DTS:X loudspeaker greatly enhances the effects experienced in 3D audio, making it the perfect complement for a 300 Series Home Cinema system.300 ICA6 includes exclusive technologies that are made in France in Focal's workshops, such as the Flax cone, delivering extremely natural sound and the Aluminium/Magnesium inverted dome tweeter for silky treble. The grills delivered with the product guarantee a total discretion whilst the patented Easy Quick Install technology ensures a quick, tool-free installation.*300 ICA6 is similar in design and exactly the same size as the 100 Series products. This makes it possible to develop your system easily depending on your requirements.CREATE AN INVISIBLE SYSTEMRound or square, the grilles are magnetic making them easy to place on the loudspeakers. They are fitted with anti-vibration pads so as not to interfere with listening. Available in a white finish, the grilles have been designed to be painted and to blend in seamlessly with the interior.THE INIMITABLE FLAX CONEThe Flax cone is an exclusive Focal technology manufactured in France. It is a sandwich cone formed of an extremely high-quality flax fibre core placed between two thin sheets of glass fibre. It ticks all the boxes for a high-fidelity cone: it is lightweight for good dynamics, rigid to support the bass and dampening to deliver a neutral and natural listening experience. The sounds are strikingly real, voices are reproduced with clarity and detail.
Taking up the aesthetic codes of the IN-CEILING, these in-wall and in-ceiling speakers are much more accomplished in their sound rendering and allow you to provide sound in large spaces, to offer a quality worthy of a home cinema to your interior, or even to complete in Atmos the In/On Wall speakers of the famous Infinite range. Developed as a 2-way coaxial speaker, the INFINITE IN-CEILING 8 features a 20cm carbon fibre midrange/bass driver pioneered by the Infinite 8 & 12, offering a rich midrange and deep, accurate bass. The 25mm titanium dome tweeter, which can be rotated by 30 degrees in all directions, contributes to the harmonic richness.
Taking up the aesthetic codes of the IN-CEILING, these in-wall and in-ceiling speakers are much more accomplished in their sound rendering and allow you to provide sound in large spaces, to offer a quality worthy of a home cinema to your interior, or even to complete in Atmos the In/On Wall speakers of the famous Infinite range. Developed as a 2-way coaxial speaker, the INFINITE IN-CEILING 6 features a 16cm carbon fibre midrange driver pioneered by the Infinite 8 & 12, offering a rich midrange and deep, accurate bass. The 19mm titanium dome tweeter, which can be rotated by 30 degrees in all directions, contributes to the harmonic quality.
The round ICT 62 in-ceiling speaker completes the product range. It combines a 160 mm woofer with a 25 mm tweeter dome, and its angled design allows perfect alignment to the listening position, meaning that even if a mounting position is only available in the ceiling, an appealing, spatial representation is still produced. In addition, the ICT 62 is also perfectly suited for use with Dolby Atmos configurations in a direct sound mode. Thanks to the acoustic coordination that is compatible with the rest of the Signature series, all imaginable setups and configurations can be realized. With an outer diameter of 238 mm and an installation depth of 130 mm, it is extremely compact despite its high performance. Highlights Large high-end fabric dome with protective diffusor for excellent dynamics and harmonic coupling to the woofer-midrange Woofer-midrange with powerful drive system and 3-layer aluminium/ceramic sandwich cone for deep bass reproduction and highest sound precision Durable long-throw rubber surrounds for linear operation of the woofer-midrange drivers to handle even large cone excursions Woofer-midranges with magnet protection cover to prevent any damage and undesirable background noise Elaborate phase-optimized crossover with 3 settings for the tweeter level Removable magnetic metal grill with fine perforations and very slim design for an elegant appearance Gold-plated push terminals for cables with cross-sections of up to 6 mm² Designed for installation in drywalls (no housing required) or in closed volumes (30 liters or more) Angled speaker unit (15°) allows perfect alignment to the listening area Tweeter can be pivoted by up to +/-15° 4fold clamping mechanism for very easy and robust installation in surfaces of up to 30 mm thicknes Klippel®-optimized speaker drivers for high efficiency and maximum level Cabinet Surface: white
2 x 2-way high-end recessed speaker This built-in ceiling loudspeaker with particularly high-quality workmanship follows all the major parameters of Magnat´s Quantum technology. Just like the classic home-audio boxes, the ICQ 262 has also been equipped with bass/mid-range cones made from highly stable and torsion-resistant ceramic-aluminium. This material results in extremely accurate reproduction and reveals even the finest of acoustic details. This special model possesses two angularly disposed tweeters as well as an additional three-way treble level adjustment and, thanks to the dual voice coil and switch, may be used in mono and stereo mode. Cascading also is possible. Highlights High-End in-wall/in-ceiling loudspeaker Special clamping mechanism for easy installation Moisture-proof speaker system, suitable for use in humid rooms (bathroom) Crossover Crossover with high-quality components and 3 settings for the tweeter level Connections Gold-plated push terminal Loudspeaker Drivers Double tweeter, double voice-coil for woofer, Stereo/Mono mode Long-throw rubber surround for maximum excursion Exclusive aluminium design protection grille Coated silk soft dome tweeter Low-resonance aluminium woofer cone with hairline finish Cabinet Surface: white
2-way high-end recessed speaker This particularly high-quality recessed ceiling speaker follows in all essential parameters of the Magnat Quantum technology. Like traditional home-audio boxes, the ICQ 82 is equipped with woofer and mid-tone diaphragms made with highly stable and rigid anodized ceramic-aluminum cones. This material provides extremely accurate reproduction and reveals even the finest acoustic details. All high frequencies are reproduced with the highest pulse fidelity and freedom from distortion by a coated fabric dome tweeter. The elaborate crossover also ensures precision allocation between the high and low frequencies. Highlights High-End in-wall/in-ceiling loudspeaker Special clamping mechanism for easy installation Moisture-proof speaker system, suitable for use in humid rooms (bathroom) Crossover Crossover with high-quality components and 3 settings for tweeter and midrange level. Connections Gold-plated push terminal Loudspeaker Drivers Tweeter with Swivel technology (can be turned by 35°) Long-throw rubber surround for maximum excursion Exclusive aluminium design protection grille Coated silk soft dome tweeter Low-resonance aluminium woofer cone with hairline finish Cabinet Surface: white
2-way high-end recessed speaker This built-in ceiling loudspeaker with particularly high-quality workmanship follows all the major parameters of Magnat´s Quantum technology. Just like the classic home-audio boxes, the ICQ 62 has also been equipped with bass/mid-range cones made from highly stable and torsion-resistant ceramic-aluminium. This material results in extremely accurate reproduction and reveals even the finest of acoustic details. All the high frequencies are reproduced through a coated fabric dome tweeter delivering highest pulse fidelity and freedom from distortion. Also, a complex crossover is responsible for precisely distributing the high and low frequencies. Highlights Moisture-proof speaker system, suitable for use in humid rooms (bathroom) High-End in-wall/in-ceiling loudspeaker Special clamping mechanism for easy installation Crossover Crossover with high-quality components and 3 settings for tweeter and midrange level Connections Gold-plated push terminal Loudspeaker Drivers Tweeter with Swivel technology (can be turned by 35°) Long-throw rubber surround for maximum excursion Exclusive aluminium design protection grille Coated silk soft dome tweeter Low-resonance aluminium woofer cone with hairline finish Cabinet Surface: white
2-way recessed ceiling speaker The IC 82 is the larger of two strong-sounding built-in ceiling loudspeakers in the Interior series. As with all models in the series, the bass/mid-range cone has been manufactured from a carbon-glass-fibre mix – which guarantees extremely high stability and a very clear and dynamic sound. The two built-in coaxial tweeters make two circuit versions possible – sound directed over a wide area or at specific points. A sophisticated fastening system allows the loudspeaker to be quickly installed with extreme ease. Highlights Multi-Directivity circuit to optimize the speaker to the room High-End in-wall/in-ceiling loudspeaker Simple mounting with special mechanism Crossover High quality crossover with APOC Connections Massive connecting terminal Loudspeaker Drivers Special tweeter alignement for best sound Woofer and midrange with carbon fibre cone and phase plug Tweeter with 19 mm aluminium dome and strong neodymium drive Cabinet Surface: white
2-way recessed ceiling speaker The IC 62 is the smaller of two strong-sounding built-in ceiling loudspeakers in the Interior series. As with all models in the series, the bass/mid-range cone has been manufactured from a carbon-glass-fibre mix – which guarantees extremely high stability and a very clear and dynamic sound. The two built-in coaxial tweeters make two circuit versions possible – sound directed over a wide area or at specific points. A sophisticated fastening system allows the loudspeaker to be quickly installed with extreme ease. Highlights Multi-Directivity circuit to optimize the speaker to the room Simple mounting with special mechanism High-End in-wall/in-ceiling loudspeaker Crossover High quality crossover with APOC Connections Massive connecting terminal Loudspeaker Drivers Twin tweeter with 19mm aluminium dome and high power Neodym magnet Special tweeter alignement for best sound Woofer and midrange with carbon fibre cone and phase plug Cabinet Surface: white
2-way recessed ceiling speaker The ICP 82 is the largest of the four recessed ceiling speakers of the Interior Performance series. Equipped with a 19 mm tweeter than can be pivoted by 35° in all directions, the in-ceiling system can also be adapted to very custom installation scenarios. As a result, most installation situations can be handled successfully. Thanks to the coated surface of the cone and high-quality components, installation in humid areas such as in bathroom or near a swimming pool is no problem. In addition, installation with the help of the rugged clamping mechanism is easy Highlights In-wall/in-ceiling loudspeaker Special clamping mechanism for easy installation Moisture-proof speaker system, suitable for use in humid rooms (bathroom) Crossover Crossover with high-quality components and 3 settings for the tweeter level Connections Gold-plated push terminal Loudspeaker Drivers PET dome tweeter Tweeter with Swivel technology (can be turned by 35°) Hairline polypropylene woofer cone Long-throw rubber surround for maximum excursion Solid protection grille Cabinet Surface: white
Highlights High-End in-wall/in-ceiling loudspeaker Simple mounting with special mechanism Cabinet Surface: white
2-way recessed ceiling speaker The ICP 62 is a medium-sized recessed ceiling speaker and belongs to the Interior Performance series. Equipped with a 19 mm tweeter than can be pivoted by 35° in all directions, the in-ceiling system can also be adapted to very custom installation scenarios. As a result, most installation situations can be handled successfully. Thanks to the coated surface of the cone and high-quality components, installation in humid areas such as in bathroom or near a swimming pool is no problem. In addition, installation with the help of the rugged clamping mechanism is easy. Highlights Moisture-proof speaker system, suitable for use in humid rooms (bathroom) Special clamping mechanism for easy installation In-wall/in-ceiling loudspeaker Crossover Crossover with high-quality components and 3 settings for the tweeter level Connections Gold-plated push terminal Loudspeaker Drivers PET dome tweeter Tweeter with Swivel technology (can be turned by 35°) Hairline polypropylene woofer cone Long-throw rubber surround for maximum excursion Solid protection grille Cabinet Surface: white
2-way recessed ceiling speaker The ICP 52 is the smallest recessed ceiling speakers of the Interior Performance series. Equipped with a 19 mm tweeter than can be pivoted by 35° in all directions, the in-ceiling system can also be adapted to very custom installation scenarios. As a result, most installation situations can be handled successfully. Thanks to the coated surface of the cone and high-quality components, installation in humid areas such as in bathroom or near a swimming pool is no problem. In addition, installation with the help of the rugged clamping mechanism is easy. Highlights In-wall/in-ceiling loudspeaker Special clamping mechanism for easy installation Moisture-proof speaker system, suitable for use in humid rooms (bathroom) Crossover Crossover with high-quality components and 3 settings for the tweeter level Connections Gold-plated push terminal Loudspeaker Drivers PET dome tweeter Tweeter with Swivel technology (can be turned by 35°) Hairline polypropylene woofer cone Long-throw rubber surround for maximum excursion Solid protection grille Cabinet Surface: white
The unbeatable one. The CENA series are full-range ceiling speakers, designed to offer an unmatched solution for large scale public address projects. The SpringFit™ fixation offers the fastest possible installation time of any speaker available on the market, while the borderless grill design is absolutely unseen for any ceiling speaker in this segment. With the selection of high-quality cone materials, exceptional intelligibility and background music performance are guaranteed. The CENA Series are equipped with SnapConnect™, a faster, more reliable and safer choice for fixed installations, accepting solid and stranded wires with sections up to 4.0 mm². The CENA3 features a 2,5” broadband driver with a continuous power handling of 10 Watt (RMS) and maximum power handling of 20 Watt. It is fitted with a multi-tapping 100V line transformer with tappings for 6W and 3W.
The unbeatable one. The CENA series are full-range ceiling speakers, designed to offer an unmatched solution for large scale public address projects. The SpringFit™ fixation offers the fastest possible installation time of any speaker available on the market, while the borderless grill design is absolutely unseen for any ceiling speaker in this segment. With the selection of high-quality cone materials, exceptional intelligibility and background music performance are guaranteed. The CENA Series are equipped with SnapConnect™, a faster, more reliable and safer choice for fixed installations, accepting solid and stranded wires with sections up to 4.0 mm². The CENA506 features a 5” broadband driver with a continuous power handling of 10 Watt (RMS) and maximum power handling of 20 Watt. They are fitted by multi-tapping 100V line transformers with tappings for 6W and 3W.
The unbeatable one. The CENA series are full-range ceiling speakers, designed to offer an unmatched solution for large scale public address projects. The SpringFit™ fixation offers the fastest possible installation time of any speaker available on the market, while the borderless grill design is absolutely unseen for any ceiling speaker in this segment. With the selection of high-quality cone materials, exceptional intelligibility and background music performance are guaranteed. The CENA Series are equipped with SnapConnect™, a faster, more reliable and safer choice for fixed installations, accepting solid and stranded wires with sections up to 4.0 mm². The CENA706 features a 6.5” broadband driver with a continuous power handling of 10 Watt (RMS) and maximum power handling of 20 Watt. It is fitted with a multi-tapping 100V line transformer with tappings for 6W and 3W.
Featuring the same balanced wide-angle listening as the other in-ceiling speakers in the CI300 range the B&W CCM362 also benefits from a larger 8-inch driver. This enables the speakers to produce a deep more controlled bass thanks to the woofers larger form factor. The CCM 362's also offer minimal bezel finish allowing for a discrete install. Featuring a 1 x 160mm (6.5 in) Polypropylene cone bass/midrange driver, and a 1 x 25mm (1in) soft dome tweeter. Humidity resistance allows the CCM362 speakers to be installed in bathrooms or swimming pools. B&W CCM362 Features * Extended bass from its 6.5-inch woofer* Balanced wide-angle listening* Shallow ceiling depth installation* Minimal bezel for discrete installation* Bowers & Wilkins Heritage sound
Featuring the same balanced wide-angle listening as the other in-ceiling speakers in the CI300 range the B&W CCM382 also benefits from a larger 8-inch driver. This enables the speakers to produce a deep more controlled bass thanks to the woofers larger form factor. The CCM 382's also offer minimal bezel finish allowing for a discrete install. Featuring a 1 x 200mm (8 in) Polypropylene cone bass/midrange driver, and a 1 x 25mm (1in) soft dome tweeter. Humidity resistance allows the CCM382 speakers to be installed in bathrooms or swimming pools. B&W CCM382 Features * Extended bass from its 8-inch woofer* Balanced wide-angle listening* Shallow ceiling depth installation* Minimal bezel for discrete installation* Bowers & Wilkins Heritage sound
The architectural speakers by Sonance for ambient listening. Enjoy crystal clear sound and comfortable listening from anywhere in the room with Sonos In-Ceiling by Sonance. Power these wired speakers with Amp for the full Sonos experience, including custom Trueplay™ tuning.
The PHANTOM H-80 is the loudspeaker you choose, when large, dynamic and well-defined sound really matters. The sound performance is clear, detailed and yet controlled and powerful. As for the soundstage, it will extend into every corner of even larger rooms and home cinemas. The PHANTOM H series: The DALI PHANTOM H-80 is an in-wall speaker build around traditional loudspeaker technologies. At its centre is the easy to recognize the DALI woofer cone made from a mix of paper pulp and wood fibre. This gives the cone a light, well behaved, but random structure that helps reproduce even the smallest details in the music. The powerful low-loss magnet system deliver precision and timing to the low frequencies and the ultra lightweight soft dome tweeter adds great resolution to the high frequencies. Together they blend into a very coherent, highly detailed, clear and natural soundstage. The PHANTOM H-80 is a true full range speaker and needs no supplement subwoofer - it is all about true hi-fi sound, versatility, and flexibility.
With the PHANTOM H-60, you will get a loudspeaker with the perfect balance between size and performance. It will provide a full and complete audio experience in mid-sized rooms and home cinemas. The PHANTOM H series: The DALI PHANTOM H-60 is an in-wall speaker build around traditional loudspeaker technologies. At its centre is the easy to recognize the DALI woofer cone made from a mix of paper pulp and wood fibre. This gives the cone a light, well behaved, but random structure that helps reproduce even the smallest details in the music. The powerful low-loss magnet system deliver precision and timing to the low frequencies and the ultra lightweight soft dome tweeter adds great resolution to the high frequencies. Together they blend into a very coherent, highly detailed, clear and natural soundstage. The PHANTOM H-60 is a true full range loudspeaker and needs no supplement subwoofer - it is all about true hi-fi sound, versatility, and flexibility.
The compact PHANTOM H-50 delivers impressive clarity, and despite its size, it manages to generate a great deal of bass. It will easily fill small rooms with great sound in a stereo or home cinema setup in smaller rooms. The PHANTOM H series: The DALI PHANTOM H-50 is an in-wall speaker build around traditional loudspeaker technologies. At its centre is the easy to recognize the DALI woofer cone made from a mix of paper pulp and wood fibre. This gives the cone a light, well behaved, but random structure that helps reproduce even the smallest details in the music. The powerful low-loss magnet system deliver precision and timing to the low frequencies and the ultra lightweight soft dome tweeter adds great resolution to the high frequencies. Together they blend into a very coherent, highly detailed, clear and natural soundstage. The PHANTOM H-50 is a true full range loudspeaker and needs no supplement subwoofer - it is all about true hi-fi sound, versatility, and flexibility.
With the PHANTOM E-80, it’s all about big sound. Drawing on every part of its 8” woofer, it will fill even very large rooms with sound, while keeping the bass under control. This makes it perfect as the main loudspeakers in a living room setup for either a stereo setup or a home cinema surround system. The PHANTOM E series The DALI PHANTOM E-80 is designed for optimum in-ceiling use, but will also work if mounted in-wall. It is all about true hi-fi sound, versatility, and flexibility. The compact sized construction and the easy-to-use compass positioning system makes placing the speaker for the optimum sound experience very straight forward. Two discreet switches offer audio adjustment options to ensure that the listener gets the most from the speakers, even in rooms that traditionally are difficult. The tilted woofer and the slightly of centre soft dome tweeter, blends gracefully and produces a richly detailed and crisp soundstage. The polypropylene cone is more resilient towards humidity than the traditional DALI cone material – wood fibre, making the PHANTOM E-80 flexible in regards to placements in covered outdoor areas and bathrooms. Optionally, the PHANTOM E-80 can be fitted with a square front grill.
This model is the perfect all-around loudspeaker. Its compact size makes it easy to place, but it is still big enough to deliver a full and complete audio experience. Use it for a stereo setup in a kitchen or family room, or to complete a home cinema in a larger room as side or rear loudspeakers. The PHANTOM E series The DALI PHANTOM E-60 is designed for optimum in-ceiling use, but will also work if mounted in-wall. It is all about true hi-fi sound, versatility, and flexibility. The compact construction and the easy-to-use compass positioning guide makes it straight forward to place the speaker for the optimum sound experience. Two discreet switches offer audio adjustment options to ensure that the listener gets the most from the speakers, even in rooms that traditionally are difficult. The tilted woofer and the slightly off-centre soft dome tweeter blend gracefully and produce a richly detailed and crisp soundstage. The polypropylene cone is more resilient towards humidity than the traditional DALI wood fibre cone material, making the PHANTOM E-60 flexible in regards to placement in covered outdoor areas and bathrooms. Optionally, the PHANTOM E-60 can be fitted with a square front grill. Back box The PHANTOM E-60 can be combined with the optional, well-known DALI backbox, which protects the speaker against moisture, dust and dirt. It keeps the sound quality consistent (symmetrical loading), even if the acoustic environment behind the walls/ceiling is uneven. With the backbox, you avoid rear sound radiation, reducing acoustic leakage from room to room and from floor to floor. The DALI backbox is not included with the PHANTOM E-60, but can be chosen as an optional accessory.
Hi-Fi To Bring Your Room To Life The 1000 ICA6 loudspeaker is a coaxial solution fully integrated in the ceiling for a discreet, high-calibre Stereo and Home Cinema sound. Made in France, it brings together exclusive technology, such as the ‘W’ cone and the pure Beryllium tweeter. Its 6 1/2” (16.5cm) midrange/bass speaker driver and 35° tilt, allows you to adjust it to suit the listening position and meets Dolby Atmos specifications. The tweeter can also be positioned and adjusted, for an optimised listening room. Finally, the square and circular magnetic grilles supplied with the product ensure they are completely unobtrusive. The installation is quick and requires no tools, thanks to the patented Easy Quick Install system. This 1000 Series range of loudspeakers embodies Focal excellence for the most sensational—and discreet—listening experience. * The design and dimensions are identical to the 300 Series products. If you have any 300 Series products, you can upgrade your Focal system very easily.
The DALI PHANTOM E-50 in-ceiling speaker delivers an incredible clear and well-defined audio experience, and impresses with the level of bass it can produce, despite its size. The E-50 is equipped with a 5.25" woofer and designed for optimum in-ceiling use, but can also be mounted in-wall. EASY INSTALLATION The dogleg mounting system makes the install process an easy one-step action simply by tightning the dedicated screws to swing out the dogleg brackets. INVISIBLE DESIGN The very thin magnetic front grilles integrates almost seamlessly into any home environment. FLEXIBILITY IN FUNCTION The PHANTOM E-series are easy to place anywhere in any room, and will even work perfectly off-axis in challenging situations and environments due to two audio settings used for adjusting the performance of the speaker. WIDE DISPERSION All speakers by DALI are designed around the principle of wide dispersion. This entails an off-axis optimisation of the audio reproduction. The technology is perfect for use in install speakers, since they are always mounted flush against either a wall or ceiling. This compact in-ceiling loudspeaker delivers an incredible clear and well-defined audio experience, and impresses with the level of bass it can produce, despite its size. The size makes it perfect for a stereo setup in a small room, or as rear speakers in a larger home cinema. The PHANTOM E series The DALI PHANTOM E-50 is designed for optimum in-ceiling use, but will also work if mounted in-wall. It is all about true hi-fi sound, versatility, and flexibility. The compact sized construction and the easy-to-use compass positioning system makes placing the speaker for the optimum sound experience very straight forward. Two discreet switches offer audio adjustment options to ensure that the listener gets the most from the speakers, even in rooms that traditionally are difficult. The tilted woofer and the slightly of centre soft dome tweeter, blends gracefully and produces a richly detailed and crisp soundstage. The polypropylene cone is more resilient towards humidity than the traditional DALI cone material – wood fibre, making the PHANTOM E-50 flexible in regards to placements in covered outdoor areas and bathrooms. Optionally, the PHANTOM E-50 can be fitted with a square front grill.
See nothing, hear everything The combination of convenience and performance that is a feature of the entire custom installation range is no better demonstrated than by the CCM663SR ceiling speaker. It marries a woven Aramid Fibre coned twin voice-coil 150mm (6in) bass/midrange driver with an offset array of two 25mm (1in) soft dome tweeters. Thanks to its highly accurate and natural sound, Aramid Fibre features on our most advanced high performance hi-fi speakers and it brings the same qualities to the CCM663SR. The twin voice coils and tweeters combine the stereo signal to enable the use of just one ceiling speaker in an installation zone without the loss of one audio channel. The CCM663SR also includes a two-position stereo/surround switch to instantly make the speaker very suitable to be used as a surround channel. Specifications: Description:2-way dual channel in-ceiling system Drive Units:2x ø20mm (1in) soft dome tweeter,1x ø150mm (6in) blue Aramid Fibre cone bass/midrange Frequency Range (-6dB):48Hz – 30kHz Recommended Amp Power:25 – 80w (per channel) Sensitivity SPL (2.83V, 1m):83dB (per channel),89dB (both channels driven) Impedance Nominal (min):8Ω (4Ω) (per channel) Frame diameter:240mm (9.5in) Cut-out diameter:202mm (8in) Depth behind surface:133mm (5.2in) Protrusion:4mm (0.2in) Pre-mount Kit:C6 Back Box:6C
See nothing, hear everything The CCM664SR is a dual, two-way ceiling speaker featuring a 150mm(6in) woven glass fibre cone bass/midrange driver and two offset soft dome tweeters. The twin voice coil bass/midrange driver and tweeters allow a stereo signal to be combined to facilitate the use of just one ceiling speaker in a single installation area without the loss of one audio channel. The CCM664SR also includes a two-position stereo/surround switch to instantly make the speaker very suitable to be used as a surround channel.Incorporating QuickDogs™ and plug-and-play functionality it is quick and easy to install. Specifications: Description: 2-way dual channel in-ceiling system Drive Units:2x ø20mm (1in) soft dome tweeter,1x ø150mm (6in) black glassfibre cone bass/midrange Frequency Range (-6dB):48Hz – 30kHz Recommended Amp Power:25 – 80w (per channel) Sensitivity SPL (2.83V, 1m):82dB (per channel) Impedance Nominal (min):88dB (both channels driven),8Ω (4Ω) (per channel) Frame diameter:240mm (9.5in) Cut-out diameter:202mm (8in) Depth behind surface:133mm (5.2in) Protrusion:4mm (0.2in) Pre-mount Kit:C6 Back Box:6C
See nothing, hear everything The CCM664 is a ceiling speaker distinguished by its adjustable tilt offset 25mm (1in) soft dome tweeter. It brings both a smoother and more detailed high frequency performance to a package that also includes a woven glass fibre150mm (6in) bass/midrange driver and three-position EQ switch for a better off-axis response. CCM664 is a classically simple and cost effective route to high quality ceiling mount sound and is simple and quick to install. Specifications: Description: 2-way in-ceiling system Drive Units:1x ø25mm (1in) soft dome tweeter, 1x ø150mm (6in) black glassfibre cone bass/midrange Frequency Range (-6dB):45Hz – 35kHz Recommended Amp Power:25 – 130w Sensitivity SPL (2.83V, 1m):87dB Impedance Nominal (min):8Ω (4.5Ω) Frame diameter:240mm (9.5in) Cut-out diameter:202mm (8in) Depth behind surface:133mm (5.2in) Protrusion:4mm (0.2in) Pre-mount Kit:C6 Back Box:6C
See nothing, hear everything CCM665 is a high performance ceiling speaker that’s simplicity itself to install and use. A 2-way design, featuring a 150mm (6in) woven glass fibre cone bass/midrange driver and a soft dome tweeter in a neat circular ceiling mount chassis. Incorporating QuickDogs™ and plug and play functionality it is quick and easy to install. A perfect speaker for those indulgent extra locations - the bathroom, the kitchen - that define the real luxury of custom installed audio Specifications: Description:2-way in-ceiling system Drive Units:1x ø25mm (1in) soft dome tweeter,1x ø150mm (6in) black glassfibre cone bass/midrange Frequency Range (-6dB):45Hz – 35kHz Recommended Amp Power:25 – 130w Sensitivity SPL (2.83V, 1m):87dB Impedance Nominal (min):8Ω (4.5Ω) Frame diameter:240mm (9.5in) Cut-out diameter:202mm (8in) Depth behind surface:133mm (5.2in) Protrusion:4mm (0.2in) Pre-mount Kit:C6 Back Box:6C
The CCM663 is a true high performance ceiling-mount speaker. The tweeter has a 25mm (1in) aluminium dome and its housing pivots for adjustable off-axis treble response. The bass/midrange driver’s die-cast chassis provides extra rigidity which results in a cleaner, faster bass, and a three-position EQ switch for a better off-axis response. The Aramid fiber cone means that the unit is well hidden behind the grille but still produces a remarkably clear and dynamic sound. Incorporating QuickDogs™ and plug-and-play functionality it is quick and easy to install. Specifications: Description: 2-way in-ceiling system Drive Units: 1x ø25mm (1in) Nautilus™ swirl loaded aluminium dome tweeter ,1x ø150mm (6in) blue Kevlar® cone bass/midrange Frequency Range (-6dB): 45Hz – 50kHz Recommended Amp Power: 25 – 130w Sensitivity SPL (2.83V, 1m): 88dB Impedance Nominal (min) Frame diameter: 240mm (9.5in) Cut-out diameter: 202mm (8in) Depth behind surface: 133mm (5.2in) Protrusion: 4mm (0.2 in) Pre-mount Kit: C6 Back Box: 6C
See nothing, hear everything The CCM682 is a high performance ceiling-mount speaker that features a 200mm (8in) Aramid Fibre cone bass/midrange driver and an aluminium dome tweeter in a neat circular die-cast chassis. Its 30mm coiland 100mm magnet ensure an incredibly efficient and reliable speaker with outstanding sound quality. The aluminium tweeter’s housing pivots for adjustable off-axis treble response. The speaker also has a three-position EQ switch for a better off-axis response. The bass/midrange driver’s diecast chassis provides extra rigidity which results in a cleaner, faster bass.The blue Aramid Fibre cone means that the unit is well hidden behind the grille but still produces a remarkably clear and dynamic sound. Incorporating QuickDogs™ and plug-and-play functionality it is quick and easy to install. Specifications: Description:2-way in-ceiling system Drive Units:1x ø25mm (1in) Nautilus™ swirl loaded aluminium dome tweeter,1x ø200mm (8in) blue Aramid Fibre cone bass/midrange Frequency Range (-6dB):35Hz – 50kHz Recommended Amp Power:25 – 150w Sensitivity SPL (2.83V, 1m):89dB Impedance Nominal (min):8Ω (4.5Ω) Frame diameter:290mm (11.4in) Cut-out diameter:250mm (9.8in) Depth behind surface:133mm (5.2in) Protrusion:4mm (0.2in) Pre-mount Kit:C8 Back Box:6C
See nothing, hear everything The CCM662 is a true high performance ceiling-mount speaker. The tweeter has a 25mm(1in) aluminium dome tweeter and its housing pivots for adjustable off-axis treble response. The die-cast chassis of the bass/midrange driver provides extra rigidity which results in a cleaner, faster bass and a three-position EQ switch offers a better off-axis response. With superior cross-over components along with gold plated terminals the CCM662 has an impressive maximum amp power of 150W. Its blue Aramid Fibre cone means that the unit is well hidden behind the grille but still produces a remarkably clear and dynamic sound. Incorporating QuickDogs™ and plug-and-play functionality it is quick and easy to install. Specifications: Description:2-way in-ceiling system Drive Units:1x ø25mm (1in) Nautilus™ swirl loaded aluminium dome tweeter,1x ø150mm (6in) blue Aramid Fibre cone bass/midrange Frequency Range (-6dB):45Hz – 50kHz Recommended Amp Power:25 – 150w Sensitivity SPL (2.83V, 1m):88dB Impedance Nominal (min):8Ω (4.5Ω) Frame diameter:240mm (9.5in) Cut-out diameter:202mm (8in) Depth behind surface:133mm (5.2in) Protrusion:4mm (0.2in) Pre-mount Kit:C6 Back Box:6C
See nothing, hear everything RD stands for Reduced Depth – so this speaker will fi t into tighter spaces than the standard CCM663. A shallower cone and a redesign of the easy-fi t QuickDogs™ frame reduce depth to a more usable 92mm, while retaining everything that makes the CCM663 such a great inceiling speaker. The familiar, yet discreet, dark blue Aramid Fibre cone of the bass/midrange driver delivers a stunningly clean, detailed response. This, combined with the pivoting aluminium dome tweeter for adjustable offaxis treble response and three-position EQ, make this one of the most versatile custom speakers around. If preferred, the supplied round grille can be replaced with an optional, square CCM663 grille. Technical Specifications: Description:2-way in-ceiling system Drive Units:1x Ø25mm (1 in) Nautilus™ swirl loaded aluminium dome tweeter,1x Ø150mm (6 in) blue Aramid Fibre cone bass/midrange Frequency range (-6dB): 35Hz – 50kHz Recommended Amplifi er Power::25W – 100W Sensitivity:86dB (2.83V, 1m) Nominal Impedance:8Ω (4.8Ω minimum) Frame:Ø240mm (9.4 in) Cut-out:Ø202mm (8 in) Depth behind surface:92mm (3.6 in) Protrusion: 7mm (0.3 in) Net weight:2.3kg (5 lb)Pre-mount Kit:PMK C6 Back Box: BB6W or BB125C
The Elipson IC8 Ultra Slim speaker is part of the Architect IN range, a collection of visually discreet audio system components. This ultra-flat, 3-way speaker is the ideal solution for shallow installation spaces. The model is compatible with most hi-fi amplifiers and home theater receivers on today's market. These speakers are compatible with Dolby Atmos and DTS:X, adding a vertical dimension to your home theater installation. The in-wall and in-ceiling speakers in Elipson's IN range have been designed for both private and public spaces. They are a testament to Elipson's commitment to offering breathtaking audio quality. The IC8 Ultra Slim may be used in a variety of settings: conference rooms, shopping malls, amphitheatres, restaurants, stores, hotels, offices, schools, private home theaters, integrated hi-fi systems...The Elipson IC8 Ultra Slim speaker is a 3-way model equipped with three 7,5 cm bass drivers composed of cellulose fibre, a 7,5 cm low-mid driver and a 20 mm silk dome tweeter. The speaker's white, magnetic grille may be painted to ensure perfect integration with your interior decor.The IC8 Ultra Slim speaker has a sensitivity rating of 88 dB and a maximum power handling of 70 W. With a frequency response ranging from 95 Hz to 20 kHz, this model is an ideal surround speaker solution for a home theater installation or background sound. Specifications:Type: 3-way ultra slim in-ceiling speakerPower: 70WFrequency Response (±3 dB): 95 Hz - 20 kHzSensitivity: 88 dB/1W/1mImpedance: 8 OhmsLoudspeakers: Woofer : 3x3" paper cone, rubber edge Mid : 3", cloth edge Tweeter : 1" silk domeColors: BlackDimensions: 272 x P50 mmCut-out dimension: 242 mmWeight: 1,6 kg
Designed to offer the best value for money ratio. The CIRA series are coaxial 2-way ceiling speakers featuring exceptional intelligibility and musical performance. The TwistFix™ borderless grill design offers easy but solid assembly and a completely seamless transition from grill to ceiling. This results in a perfect blend in to its environment. The QuickFit™ installation system combined with FastCon™ connector offers lifetime stability and great installers convenience.The CIRA5 features a 5 ¼” driver using polypropylene cone material, combined with a 1” Mylar tweeter fitted with a phase plug for excellent off axis performance. The selected materials guarantee a low distortion performance with smooth and flat frequency response. A continuous power handling of 30 Watt (RMS) and maximum power handling of 60 watt is achieved, while fitted with a multi-tapping 100V line transformer with tappings for 6W, 3W, 1.5W and an 8 Ohm or 16 Ohm bypass connection.Specifications:Max. Power: 60 WRMS Power: 30 WSensitivity (1W/1m): 87 dBSpeaker type: 2-way coaxialImpedance: 16ΩConnectors: Multi-tap Fast-con™ connectionsSound Pressure (Max. W/1m): @ 100 V: 102 dBFrequency: Response (± 3 dB): 60 Hz - 20 kHz