. go to top icon

Installation Microphones

Filters
62  Products
Page
of 2

The Shure CVG18S-BC Gooseneck Condenser Microphone with Mute and LED (45cm, Black) features dual-gooseneck sections for full articulation. It can be used as an all-in-one solution for sound reinforcement in small-to mid-sized discussion systems such as AV conferencing, meetings, public speaking systems, and more.The microphone is equipped with CommShield Technology, which guards against unwanted RF interference from portable wireless devices such as smartphones and tablets.Additionally, from corporate facilities, houses of worship, to government institutions and more, the Centraverse microphone delivers for any conferencing customer.Key Features:Cardioid polar pattern with tailored response for speechDual-section gooseneck enables ease of positioning and placement optionsBlack colorIncluded Flange Mount and available snap-fit windscreens (ACVG4WS-B - 4 pack)Available in three configurations:With Inline Preamp (CVG12 / CVG18)With Mute switch/LED, Inline Preamp (CVG12S / CVG18S)With Light-ring, Mute Switch, Inline Preamp (CVG12RS / CVG18RS)Commshield® interference immunityGuards against unwanted RF Interference from portable wireless devices (smartphones, etc.)High resistance to intense nearby radio signalsSuperior Shure design and rugged, dependable constructionStandard and desktop base* gooseneck options with attached inline pre-amplifier (*XLR Desktop base CVD-B available as optional accessory)Included accessoriesWindscreenRPM640 Mounting Flange

189 €
36 Instalments 6,53€ / month
Upon Order

OverviewAutomatic Coverage™ technology requires no set-up yet gives you precise control of audio capture if desired. With next-generation array architecture for enhanced directional pickup and more natural speech, the MXA920 is easy to use and quick to deploy for AV conferencing, camera tracking, voice lift, or sound reinforcement.How It WorksAutomatic CoverageTM technology captures talkers in up to 8 adjustable coverage areas that you define without the need to aim pickup lobes.Virtual Acoustic Boundary ensures that voices or noises outside of defined automatic coverage areas will not be heard.You can also turn Automatic Coverage technology off and use Steerable CoverageTM technology to precisely aim 8 pickup lobes with individual audio outputs to feed separate loudspeaker zones for voice lift applications.Onboard IntelliMix® DSP applies automatic mixing, echo cancellation, noise reduction, and automatic gain control for a pristine audio mix.Quality that’s in the DetailsSquare and round form factors meet the architectural needs of today’s meeting spacesWhite, black, and aluminum finishes to complement your interior design; all paintable for custom needsCertified for use with Microsoft Teams and compatible with popular collaboration toolsAudio, PoE power, and control signals connect via Dante/AES67 digital audio networking over a single cableShure Audio Encryption keeps meeting content secure between the MXA920 and other Microflex ecosystem devices in the roomLED status bar with configurable colors and brightnessCommand strings enable seamless integration with third-party camera and room control systemsWhy It's BetterNext generation array architecture delivers enhanced low frequency directionality and the most natural speech qualityAdvanced talker localization algorithm instantly reports the exact position of each talker for the most accurate camera tracking possible.Precise coverage control provides exceptional isolation between microphone lobes and loudspeakers, guaranteeing the maximum sound level possible in voice lift and sound reinforcement applicationsIn larger spaces, Designer system configuration software helps you configure MXA920’s with other Microflex Ecosystem devicesChoose Teams-certified bundles with the ANIUSB-MATRIX, P300-IMX, or IntelliMix Room DSP and MXN5C networked loudspeaker

6.361 €
36 Instalments 219,60€ / month
Upon Order

Supercadioid condenser gooseneck microphone, 48 cm lenght. Bright ring to indicate ON air. Power base with switch. Powered by the base with 2x 1,5 Vcc AAA batteries or Phantom Power.

62 ,5 €
36 Instalments 2,16€ / month
In Stock

The CGN99 C/S and CGN99 C/L, part of the DAC Series, are condenser gooseneck microphones with a cardioid polar pattern. They are specially designed for inexperienced speakers who talk into the microphone from widely varying angles. The rugged gooseneck is available in two different lengths - C/S - 30cm (12in); C/L - 50cm (20in) and ideal for fixed and mobile installations. CGN99 C/S and CGN99 C/L come with an integrated XLR phantom power adapter with 250Hz bass rolloff. The phantom power adapter connects to any standard mixer input with 9V to 52V power supply.

149 €
36 Instalments 5,14€ / month
In Stock

With three cardioid condenser elements in a single housing, the phantom-powered U843R offers a remarkably versatile tool for surface-mount installations. It is ideal for a variety of video and audio conferencing applications, especially when used with an Audio-Technica automatic SmartMixer®. Levers on the microphone base allow easy reorientation of two elements to offer 360° or 300° coverage. Since elements can be powered and used individually or in any combination, further flexibility is easily achieved. For example, with two elements powered, the microphone can provide a figure-of-eight polar pattern; with a single element powered, the microphone functions as a standard cardioid boundary microphone. Installation and repositioning are extremely quick, thanks to four recessed pathways on the base of the microphone that enable the user to route the cable as required to accommodate any installation requirements; no tools or disassembly are needed. The microphone also offers Audio-Technica’s innovative UniGuard® RFI-shielding technology.MicrophonesElement: Fixed-charge back plate, permanently polarized condenserPolar Pattern: Cardioid x 3Frequency Response: 75-15,000 HzLow Frequency Roll Off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa

465 €
36 Instalments 16,05€ / month
Upon Order

Desktop base for Centraverse 12” and 18” gooseneck microphones. Desktop base provides support for Centraverse 12" and 18" Gooseneck Microphones.

86 ,31 €
36 Instalments 2,98€ / month
Upon Order

12” (30.5 cm) Gooseneck Microphone with Integrated Desktop Base and inline preamp  Gooseneck cardioid microphone consists of integrated desktop base, inline preamplifier, LED lighting for use in installed sound reinforcement or conferencing. Features a dual-section gooseneck for positioning and Commshield RF Filtering for interference. Designed with dual gooseneck sections for full articulation and an integrated base for precise positioning, the CVG12D provides scalable, high level performance in a wide variety of locations, including podiums and desktops.

142 ,9 €
36 Instalments 4,93€ / month
Upon Order

With its half-space unidirectional polar pattern, low-profile design, and outstanding sound quality, the PRO44 is ideal for conference tables, podiums, lecterns and other installed-sound uses. This versatile boundary mic's self-contained electronics eliminate the need for external power modules. The PRO44 is equipped with a wide-range condenser element with low-mass diaphragm for superior performance. Low-profile design for minimum visibility Wide-range condenser element with low-mass diaphragm for superior performance Self-contained electronics eliminate need for external power modules Rugged design and construction 25' (7.6 m) detachable cable (TA3F to XLRM-type)

135 €
36 Instalments 4,66€ / month
Upon Order

The PRO42's low-profile design assures inconspicuous appearance for surface-mount use in boardroom, school, government, house of worship and other installed applications. Designed for sound reinforcement, broadcasting and recording applications, the PRO42 brings crisp, intelligible audio reproduction to the podium, stage, conference table and beyond. With a wide-range condenser element and low-mass diaphragm for superior performance, the microphone is equipped with self-contained electronics, eliminating the need for external power modules. Very low-profile design for minimum visibility Wide-range condenser element with low-mass diaphragm for superior performance Uniform polar pattern for maximum rejection of unwanted sounds Rugged design and construction 25' (7.6 m) cable permanently attached between microphone and XLRM-type connector

109 €
36 Instalments 3,76€ / month
Upon Order

The right speech doesn’t just inform. It can excite and even transform those who hear it. So, we designed the MX418 to treat spoken audio with the detail and respect it deserves. Because clarity commands attention. How it Works The MX418 delivers the responsiveness to everything you want them to hear—and controls what you don’t. It’s great sound and reliable performance, without noise or distractions. Even installation was rethought and reengineered to be simpler and smoother for AV integration. Precise, tailored-for-speech audio for any size room. Why It's Better In tune with speech Microflex microphone cartridges are focused specifically to capture human voice, so the talker always comes through clearly. No installation headaches The variety of mounting and form factor options make the MX418 easy to set up in any space. Clean signal Shure Commshield® is built into Microflex to reject RF interference from ever-present smart phones, keeping the focus on the performance. Only the detail you want A snap-fit windscreen keeps breath and plosives from being a distraction. While vibration noise gets absorbed by the integrated shock mount. Only speech gets through. Quality That’s In The Details 18-inch gooseneck 12-inch gooseneck available Low-profile design Dual-flex gooseneck provides easy mic adjustment Versions available with mute button, LED indicator, locking flange and shockmount assemblies Can mount on table, lectern, podium or similar surface Interchangeable cartridges ensure great audio in any environment

299 €
36 Instalments 10,32€ / month
Upon Order

The right speech doesn’t just inform. It can excite and even transform those who hear it. So, we designed the MX418 to treat spoken audio with the detail and respect it deserves. Because clarity commands attention. How it Works The MX418 delivers the responsiveness to everything you want them to hear—and controls what you don’t. It’s great sound and reliable performance, without noise or distractions. Even installation was rethought and reengineered to be simpler and smoother for AV integration. Precise, tailored-for-speech audio for any size room. Why It's Better In tune with speech Microflex microphone cartridges are focused specifically to capture human voice, so the talker always comes through clearly. No installation headaches The variety of mounting and form factor options make the MX418 easy to set up in any space. Clean signal Shure Commshield® is built into Microflex to reject RF interference from ever-present smart phones, keeping the focus on the performance. Only the detail you want A snap-fit windscreen keeps breath and plosives from being a distraction. While vibration noise gets absorbed by the integrated shock mount. Only speech gets through. Quality That’s In The Details 18-inch gooseneck 12-inch gooseneck available Low-profile design Dual-flex gooseneck provides easy mic adjustment Versions available with mute button, LED indicator, locking flange and shockmount assemblies Can mount on table, lectern, podium or similar surface Interchangeable cartridges ensure great audio in any environment

301 ,05 €
36 Instalments 10,39€ / month
Upon Order

 The C547 BL Boundary Microphone from AKG is designed to capture audio while surface mounted on stages, podiums, desktops and more. The C547 BL features a hypercardioid polar pattern that effectively minimizes noise and ambiance. A rugged non-crush enclosure protects the microphone from damage whenever accidentally stepped on. The low-frequency roll-off filter eliminates foot-fall noise, rumble and other low frequency noise. The C547 BL Boundary Microphone is also an ideal kick-drum and percussion microphone. Features:A microphone for stages, podiums, desktops, and other similar placement settingsHypercardioid polar pattern effectively eliminates off-axis noise and ambianceAn ideal kick-drum/percussion microphoneRugged crush-resistant enclosureLow-frequency roll-off filter minimizes foot-fall noise, hum, rumble and surface noise.Includes W547 windscreen

580 €
36 Instalments 20,02€ / month
4-10 days

The ADX40 is a miniaturized condenser microphone designed to hang from an overhead position for applications such as group vocals, choir, theatrical production and room ambience. Having a uniformly controlled cardioid polar pattern, the ADX40 helps isolate the area or section being miked from other vocals or instruments on stage. The ADX40 is also available in a hypercardioid polar pattern for tighter pick-up control. With a wide frequency range of 40 Hz - 20 kHz, the ADX40 provides natural sound with exceptional sound response.The ADX40 miniature hanging condenser microphone is supplied with an attached 30' shielded cable, external windscreen, wire hanger for positioning and phantom power adapter. 9 -52 V phantom required.Applications:Overhead mic for choir, group vocalOrchestra mikingAmbient room mikingSymphonic area mikingSchool plays, theatrical productionsSpecifications:Type: CondenserPolar Pattern: CardioidFrequency Response: 40 Hz - 20 kHzImpedance: 250 OhmsSensitivity: @1k 5 mV/Pa (C), 4.6 mV/Pa (HC)  

245 €
36 Instalments 8,46€ / month
Upon Order

The CBL410 PCC is a microphone for use with any PC or laptop. It improves audio quality when conferencing via VoIP. The microphone reproduces the voice with a clear and natural sound. With its 3.5mm stereo jack, it is a real plug-and-play device. No drivers are needed. Its cascading capability makes the CBL410 PCC the perfect tool for single-person usage in the office and/or for multiperson usage in a meeting room. This microphone provides optimum intelligibility and audio quality for your meetings.Specifications:Audio frequency bandwidth: 20 - 20000 HzSensitivity: 3.88 mV/PaSignal to Noise: 58 dB-A

96 €
36 Instalments 3,31€ / month
In Stock

The CMX382 is a hanging condenser microphone with a slim and miniature design. It is designed for offering versatile solutions for sound reinforcement or recording systems in a wide variation of applications. Typical applications range from speech in meeting or conference rooms to music in houses of worship, orchestra’s, choirs and many others. The tailored frequency response guarantees a rich, clear and sensitive sound reproduction while the cardioid directivity characteristic eliminates feedback and unwanted noise. The included spiral hanging bracket makes overhead suspension possible above conference tables, choirs, orchestra’s, ... while the flexing gooseneck structure allows a highly accurate positioning. The microphone comes delivered with a fixed connection cable with a total length of 3 meters which is fitted with a 4-pin Mini-XLR connector. An included phantom power adapter with standard 3-pin XLR connector converts the supplied phantom voltage and allows connection to standard pre-amplifiers or mixers. The included windscreen reduces unwanted and popping sounds. In comparison with the already known CMX380 microphone, the CMX382 contains an improved spiral hanging bracket and a flexing gooseneck structure which makes highly accurate positioning possible. The included phantom power adapter with low-noise characteristics guarantees improved overall signal/noise performance.Specifications:Type: Back electret condenserPolar Pattern: Cardioid (Uni-directional)Frequency Response: 50 Hz - 18 kHzSensitivity: 42 dB ±3 dB / Pa (at 1 kHz)Impedance: 200 Ohm ± 30 %Max. SPL: 130 dBSignal-to-noise ratio: 75 dBPower supply: 10 - 52 V DC Phantom powerDimensions: Ø13.5 (head Ø) x 160 (length) mmWeight net: 100 g  

165 €
36 Instalments 5,70€ / month
Upon Order

The ME 34 is a permantly polarized condenser microphone head for use with Sennheiser MZH goosenecks. This cardioid capsule is suitable for a very wide range of applications including: presentation, conference, public address, studio, broadcast, video and others.Features:Cardioid capsule for a wide range of applicationsLow noise and large transponse rangeFor use with Sennheiser MZH goosenecksCorrosion resistant gold plated contact pointsSmooth response across all frequencies

187 €
36 Instalments 6,46€ / month
In Stock

The MZH 3042 is a metal gooseneck with two flexible sections for use with the ME 34, ME 35 and ME 36 microphone heads. The rugged gooseneck is fitted with a balanced, floating XLR-3 output, enabling the microphone to be powered from 12 - 48 V phantom power and has a length of 400 mm.Features:Sturdy and elegant metal gooseneck for unobtrusive mikingFor ME 34, ME 35, ME 36 microphone capsulesRF shielding against intermodulation from wireless equipment/devicesL-version with red light ring

265 €
36 Instalments 9,15€ / month
Upon Order

The MZH 3040 is a metal gooseneck for use with the ME 34, ME 35 and ME 36 microphone heads. The rugged gooseneck is fitted with a balanced, floating XLR-3 output, enabling the microphone to be powered from 12 - 48 V phantom power and has a length of 400 mm.Features:Sturdy and elegant metal gooseneck for unobtrusive mikingFor ME 34, ME 35, ME 36 microphone capsulesRF shielding against intermodulation from wireless equipment/devicesL-version with red light ring​

177 €
36 Instalments 6,11€ / month
4-10 days

The CGN521STS is a heavy duty professional tabletop microphone set with excellent shock absorbing properties. Its features a CGN521 condenser gooseneck microphone with a cardioid polar pattern on a slim, 50 cm long gooseneck. This professional microphone is specially designed for inexperienced speakers who talk into the microphone from widely varying angles. The tabletop microphone provides an extremely rugged switch capable of withstanding more than 25,000 switching cycles. It can be programmed for the following functions: push to talk, push to mute, push on/off, low cut on/off.An LED square clearly indicates the microphone status. The CGN521 STS comes with a professional, gold plated 3-pin XLR audio input.Features: 30 cm slim line gooseneck microphoneSwitch with programmable functionsLED status squareHeavy duty metal housingGold plated connectorSpecifications:Audio frequency bandwidth: 70 to 18000 HzEquivalent noise level: 30 dB-ASignal to Noise: 64 dB-AElectrical impedance: 600 OhmsRecommended load impedance: 2000 OhmsVoltage: 9 to 52 VCurrent: 3 mAType: Balanced XLRGender: MaleContacts: 3-pinFinish: matte black

380 €
36 Instalments 13,12€ / month
4-10 days

The CGN99 C/S is, part of the DAC Series, and condenser gooseneck microphone with a cardioid polar pattern. Especially designed for inexperienced speakers who talk into the microphone from widely varying angles.  The rugged gooseneck is available in two different lengths (C/S: 30cm (12in); C/L: 50cm (20in) and ideal for fixed and mobile installations. CGN99 C/S and CGN99 C/L come with an integrated XLR phantom power adapter with 250Hz bassroll of phantom power adapter connects to any standard mixer input with 9V to 52V power supply.  Specifications:Audio frequency bandwidth: 70 to 18000 HzEquivalent noise level: 21 dBSensitivity: 12 mV/PaSignal to Noise: 73 dB-AElectrical impedance: 600 OhmsRecommended load impedance: 2000 Ohms 

149 €
36 Instalments 5,14€ / month
In Stock

The CGN99 H/S, part of the DAC Series, is a condenser gooseneck microphone with a hypercardioid polar pattern. A good choice for all situations when unwanted noise arrives from the sides or where people talk into the microphone from greater distances. The rugged gooseneck is available in two different lengths (C/S: 30cm (12in); C/L: 50cm (20in) and ideal for fixed and mobile installations. CGN99 H/S and CGN99 H/L come with an integrated XLR phantom power adapter with 250Hzbassrolloff. The phantom power adapter connects to any standard mixer input with 9V to 52V power supply. Specifications:Audio frequency bandwidth: 50 to 19000 HzEquivalent noise level: 21 dB-ASensitivity: 12 mV/PaSignal to Noise: 73 dB-AElectrical impedance: 600 OhmsRecommended load impedance: 2000 Ohms 

149 €
36 Instalments 5,14€ / month
In Stock

Ασύρματη μικροφωνική μονάδα συνέδρου σε επιτραπέζια βάση ZW-3000D της Metro Audio Systems με ενσωματωμένο μικρόφωνο και μήκος βραχίονα 43 εκ.

278 €
36 Instalments 9,60€ / month
In Stock

Κεντρική μονάδα ελέγχου ασύρματου συνεδριακού συστήματος (Wireless Microphone System) Metro ZW-3000S με δυνατότητα εγγραφής βίντεο, bluetooth και usb recording. Υποστηρίζει έως και 255 ασύρματες μονάδες μικροφώνου (προέδρου και συνέδρων) με δυνατότητα λειτουργίας έως και 4 μκροφώνων ταυτόχρονα. Μέγιστη απόσταση ασύρματων μονάδων μικροφώνου από την κεντρική μονάδα 50 - 80 μέτρα.Κατάλληλη για εγκατάσταση σε αίθουσες συνεδριάσεων - meeting rooms σε τράπεζες, εμπορικά γραφεία, ξενοδοχεία, εκπαιδευτικά ιδρύματα, νοσοκομεία, δημαρχεία και αλλού.

1.263 €
36 Instalments 43,60€ / month
In stock soon

Ασύρμαρτη μικροφωνική μονάδα προέδρου σε επιτραπέζια βάση ZW-3000C της Metro Audio Systems με ενσωματωμένο μικρόφωνο και μήκος βραχίονα 43 εκ. 

294 €
36 Instalments 10,15€ / month
In stock soon

The CGN99 H/L, part of the DAC Series, is a condenser gooseneck microphone with a hypercardioid polar pattern. A good choice for all situations when unwanted noise arrives from the sides or where people talk into the microphone from greater distances. The rugged gooseneck is available in two different lengths (C/S: 30cm (12in); C/L: 50cm (20in) and ideal for fixed and mobile installations. CGN99 H/S and CGN99 H/L come with an integrated XLR phantom power adapter with 250Hzbassrolloff. The phantom power adapter connects to any standard mixer input with 9V to 52V power supply. Specifications:Audio frequency bandwidth: 50 to 19000 HzEquivalent noise level: 21 dB-ASensitivity: 12 mV/PaSignal to Noise: 73 dB-AElectrical impedance: 600 OhmsRecommended load impedance: 2000 Ohms 

149 €
36 Instalments 5,14€ / month
In Stock

The CMX200-series is a 360° revolving pipe-neck condenser microphone, designed to be used for conferences, sound reinforcements, translations and studio applications. It has a high sensitive condenser element with a unidirectional cardioid polar pattern which ensures an excellent sound quality and reduces the feedback to a strict minimum, even when exposed to vigorous, hard sound.Thanks to its flat frequency characteristic, the CMX200 ensures a permanent high-fidelity sound, true to the user’s voice and intonation. The dark grey color and slimline design permit a discreet blending with every possible interior or background. The 35 cm version can be used for most general speech applications where the microphone is placed on tables or desks, while the 55 cm version is mainly used for placing on altars

144 €
36 Instalments 4,97€ / month
Upon Order

The Classis BM 32 / 33 / 34 condenser boundary microphones have been designed for flush mounting into tabletops or ceilings. The microphones have been designed for applications such as tele/videoconferencing, recording or amplification of round table discussions and wherever the microphone needs to be as unobtrusive as possible.The Classis BM 32 has a half-cardioid polar pattern, which increases the gain-before-feedback and decreases the amount of diffuse ambience. The high sensitivity guarantees a constant output level even from long distance sources. Elastic bearing rings achieve mechanical isolation from the mounting surface and therefore offer effective sound isolation of the microphone. Specifications: Half-cardioid polar pattern Flat, wide range frequency response High-quality reproduction of speech Unobtrusive design Ceiling or tabletop mounting Fast and easy installation

176 €
36 Instalments 6,08€ / month
In Stock

The Classis BM 32 / 33 / 34 condenser boundary microphones have been designed for flush mounting into tabletops or ceilings. The microphones have been designed for applications such as tele/videoconferencing, recording or amplification of round table discussions and wherever the microphone needs to be as unobtrusive as possible.The Classis BM 32 has a half-cardioid polar pattern, which increases the gain-before-feedback and decreases the amount of diffuse ambience. The high sensitivity guarantees a constant output level even from long distance sources. Elastic bearing rings achieve mechanical isolation from the mounting surface and therefore offer effective sound isolation of the microphone. Specifications: Half-cardioid polar pattern Flat, wide range frequency response High-quality reproduction of speech Unobtrusive design Ceiling or tabletop mounting Fast and easy installation

181 €
36 Instalments 6,25€ / month
Upon Order

Two microphones in one—perfect for applications requiring separate miking for PA and broadcast. The ES995 offers excellent sonic character, simple operation and streamlined appearance. One element is typically used to provide sound reinforcement while the other feeds clean audio to a broadcast network, media pool or logging recorder with no electrical interaction between the elements. The two elements can also feed audio to two separate installed systems in a church or school.The circuit grounds for each channel are completely isolated, greatly reducing the potential for hum. Each element is individually shock-mounted. Robust table-mounted microphone is ideal for courtrooms, boardrooms, government chambers, schools and churches. Rigid-pipe design has ball-in-socket mounted to heavy, portable tabletop base. Integral dual power module; requires 11-52V DC phantom power. Optically coupled, lighted remote mute switch has three modes (push-to-mute, toggle, and push-to-talk). Interchangeable elements are available for omnidirectional and hypercardioid patterns. 19.51” long. Specifications:Elements: Two fixed-charge back plate, permanently polarized condensersPolar Pattern: CardioidFrequency Response: 90-15,000 HzLow Frequency Roll-off: Fixed 120 Hz, 12 dB/octaveOpen Circuit Sensitivity: -41 dB (8.9 mV) re 1V at 1 PaImpedance: 250 ohmsMaximum Input Sound Level: 138 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range (Typical): 109 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 65 dB, 1 kHz at 1 PaPhantom Power Requirements: 11-52V DC, 3 mA typicalSwitch: (on circuit board) SW1: Normal/-15 dB, SW2: Mute/Toggle/Talk, SW3: Off/OnWeight: 3.31 lb (1.5 kg)Dimensions: 19.51" (495.6 mm) long, 1.51" (38.4 mm) maximum head diameterOutput Connector : Integral 6-pin XLRM-typeCable: 30' (9.1 m) 6-conductor shielded "Y" cable - 6-pin XLRF to two 3-pin XLRMOptional interchangeable elements: ESE-H hypercardioid (100º), ESE-0 omnidirectional (360º)

399 €
36 Instalments 13,78€ / month
Upon Order

Maintaining the Audio-Technica tradition of clear and transparent sound quality, the U853A cardioid condenser hanging microphone is ideal for speech, theater, orchestra and choir sound reinforcement and recording. The microphone's fast transient response and low distortion characteristics allow every complex detail to be heard with all its impact-rich, vibrant qualities faithfully reproduced. Equipped with UniGuard innovations that offer unsurpassed immunity from radio frequency interference, the U853A accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine line cardioid polar patterns. The battery- or phantom-powered microphone also offers an 80 Hz low-cut UniSteep filter that reduces pickup of low-frequency ambient noise.Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 30-20,000 HzLow Frequency Roll Off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: Phantom: 42 dB (7.9 mV) re 1V at 1 Pa Battery: 43 dB (7.0 mV) re 1V at 1 PaImpedance: Phantom: 200 ohms Battery: 270 ohmsMaximum Input Sound Level: Phantom: 133 dB, 1 kHz at 1% T.H.D. Battery: 123 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: Phantom: 109 dB, 1 kHz at Max SPL Battery: 99 dB, 1 kHz at Max SPLSignal to Noise Ratio: 70 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 2 mA typicalBattery Type: 1.5V AA/UM3Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)Switch: Off, on-flat, on-roll-offCable: 25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector

302 €
36 Instalments 10,43€ / month
Upon Order

The PRO49QL quick-mount double-gooseneck cardioid condenser microphone is designed to plug into any standard XLRF-type surface or cable connector. With a flat, smooth frequency response and self-contained electronics, this mic features a quiet, fixed-placement, long-life gooseneck and wide-range condenser element with low-mass diaphragm for superior performance. Available in two lengths: 13.07" (PRO49Q); 16.46" (PRO49QL).Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 70-16,000 HzOpen Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 PaImpedance: 100 ohmsMaximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 106 dB, 1 kHz at Max SPLSignal to Noise Ratio: 66 dB, 1 kHz at 1 PaPhantom Power Requiremens: 9-52V DC, 2 mA typicalWeight: 3.0 oz (84 g)Dimensions: 16.46" (418.0 mm) long, 0.47" (12.0 mm) head diameter, 0.74" (18.9 mm) base diameterOutput Connector: Integral 3-pin XLRM-type

135 €
36 Instalments 4,66€ / month
Upon Order

Ideal for conference centers, boardrooms, courtrooms, houses of worship, and other installed applications, the U857Q is designed to plug directly into a panel- or desk-mounted XLRF-type connector. This cardioid condenser quick-mount gooseneck microphone offers unsurpassed immunity from radio frequency interference thanks to Audio-Technica's UniGuard innovations. The 14.47" long microphone features an ultra-flexible small-diameter gooseneck and accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine line cardioid polar patterns. Equipped with self-contained electronics, the phantom-powered microphone also offers an 80 Hz low-cut UniSteep filter that reduces pickup of low-frequency ambient noise.Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 30-20,000 HzLow Frequency Roll Off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: 39 dB (11.2 mV) re 1V at 1 PaImpedance: 250 ohmsMaximum Input Sound Level: 139 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 115 dB, 1 kHz at Max SPLSignal to Noise Ratio: 70 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 2 mA typicalSwitch: Flat, roll-offWeight: 5.1 oz (144 g)Dimensions: 14.37" (365.0 mm) long, 0.48" (12.2 mm) head diameter, 0.74" (18.9 mm) base diameterOutput Connector: Integral 3-pin XLRM-type

263 €
36 Instalments 9,08€ / month
Upon Order

The 18.94" version of the U857Q, the U857QL cardioid condenser quick-mount gooseneck microphone is designed to plug directly into a panel- or desk-mounted XLRF-type connector. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations. It features an ultra-flexible small-diameter gooseneck and accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine line cardioid polar patterns. Equipped with self-contained electronics, the phantom-powered microphone also offers an 80 Hz low-cut UniSteep filter that reduces pickup of low-frequency ambient noise.Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 30-20,000 HzLow Frequency Roll Off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: 39 dB (11.2 mV) re 1V at 1 PaImpedance: 250 ohmsMaximum Input Sound Level: 139 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 115 dB, 1 kHz at Max SPLSignal to Noise Ratio: 70 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 2 mA typicalSwitch: Flat, roll-offWeight: 5.3 oz (150 g)Dimensions: 18.94" (481.0 mm) long, 0.48" (12.2 mm) head diameter, 0.74" (18.9 mm) base diameterOutput Connector: Integral 3-pin XLRM-type

268 €
36 Instalments 9,25€ / month
Upon Order

With advanced capsule design coupled with carefully engineered internal electronics, the U857QLU UniLine condenser delivers clear, consistent sound for a variety of installed applications. The 23.74" version of U857QU, the U857QLU features Audio-Technica’s UniLine line-cardioid element. The microphone is designed to plug directly into a panel- or desk-mounted XLRF-type connector. Its ultra-flexible, robust gooseneck permits easy adjustment into desired shape while resisting inadvertent repositioning.Featuring UniGuard innovations that offer unsurpassed immunity from radio frequency interference, the U857QLU accepts new interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine line cardioid polar patterns. The phantom-powered microphone also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: Line CardioidFrequency Response: 30-20,000 HzLow Frequency Roll Off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: –35 dB (17.7 mV) re 1V at 1 PaImpedance: 250 ohmsMaximum Input Sound Level: 135 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 115 dB, 1 kHz at Max SPLSignal to Noise Ratio: 74 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 2 mA typicalSwitch: Flat, roll-offWeight: 5.9 oz (167 g)Dimensions: 23.74" (603.0 mm) long, 0.48" (12.2 mm) head diameter, 0.74" (18.9 mm) base diameterOutput Connector: Integral 3-pin XLRM-type

304 €
36 Instalments 10,50€ / month
Upon Order

Equipped with Audio-Technica's UniLine line-cardioid element with a tightly focused 90° acceptance angle, the U853AU UniPoint UniLIne Condenser Hanging Microphone features UniGuard innovations that offer unsurpassed immunity from radio frequency interference. The battery or phantom-pored microphone accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine line cardioid polar patterns. It also offers an 80 Hz low-cut UniSteep filter that reduces pickup of low-frequency ambient noise.Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: Line CardioidFrequency Response: 30-20,000 HzLow Frequency Roll-off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: Phantom —38 dB (11.2 mV) re 1V at 1 Pa; Battery —39 dB (10.0 mV) re 1V at 1 PaImpedance: Phantom 200 ohms; Battery 270 ohmsMaximum Input Sound Level: Phantom 130 dB, 1 kHz at 1% T.H.D.; Battery 120 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range (Typical): Phantom 110dB, 1 kHz at Max SPL; Battery 100 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 74 dB, 1 kHz at 1 PaPhantom Power Requirements: 11-52V DC, 2 mA typicalBattery Type: 1.5V AA/UM3Battery Current/ Life: 0.4 mA / 1200 hours typical (alkaline)Switch: Off, on-flat, on-roll-offWeight (microphone): 1.1 oz (30 g)Weight (Power Module): 4.9 oz. (139 g)Dimensions (Microphone): 6.14" (156.0 mm) long, 0.48" (12.2 mm) diameterDimensions Power Module (H x W x D): 3.31" x 2.48" x 0.87", (84.0 mm x 63.0 mm x 22.0 mm)Output Connector (power module): Integral 3-pin XLRM-typeCable: 25' (7.6 m) long, permanently attached 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connectorOptional interchangeable elements: UE-C Cardioid (120°); UE-H hypercardioid (100°); UE-O omnidirectional (360°)Accessories Furnished: AT8154 two-stage foam windscreen; AT8451 steel hanger; AT8531 power module; AT8438 5/8"-27 stand adapter; batteryAudio Technica: M32

340 €
36 Instalments 11,74€ / month
Upon Order

Offering outstanding Audio-Technica sound for surface-mount applications, the U851A features a PivotPoint rotating output connector, UniSteep® filter and UniGuard® RFI-shielding technology. This battery- or phantom-powered condenser microphone accepts interchangeable condenser elements - available for boundary microphones in cardioid, hypercardioid and omnidirectional polar patterns. Its heavy die-cast case and silicon foam bottom pads minimize coupling of surface vibration to the microphone. With superior off-axis rejection and maximum gain-before-feedback, this professional microphone sets audio-quality standards in challenging acoustic environments.Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)Frequency Response: 30-20,000 HzLow Frequency Roll Off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: Phantom: -40 dB (10.0 mV) re 1V at 1 Pa Battery: -41 dB (8.9 mV) re 1V at 1 PaImpedance: Phantom: 200 ohms Battery: 270 ohmsMaximum Input Sound Level: Phantom: 133 dB SPL, 1 kHz at 1% T.H.D. Battery: 123 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: Phantom: 111 dB,1 kHz at Max SPL Battery: 101 dB, 1 kHz at Max SPLSignal to Noise Ratio: 72 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 2 mA typicalBattery Type: 1.5V AA/UM3Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)Switch: Off, on-flat, on-roll-offCable: 25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector

303 €
36 Instalments 10,46€ / month
Upon Order

Featuring breakthrough audio and mechanical design innovations, the phantom-powered U851R offers outstanding speech intelligibility and transparent sound quality for surface-mount applications. The microphone is equipped with a PivotPoint rotating output connector, UniSteep filter and UniGuard RFI-shielding technology. It accepts interchangeable condenser elements - available for boundary microphones in cardioid, hypercardioid and omnidirectional polar patterns. With a heavy die-cast case and silicon foam bottom pads to minimize coupling of surface vibration to the microphone, the U851R is equipped with self-contained electronics, eliminating the need for an external power module.Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)Frequency Response: 30-20,000 HzLow Frequency Roll Off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: 34 dB (19.9 mV) re 1V at 1 PaImpedance: 200 ohmsMaximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 108 dB, 1 kHz at Max SPLSignal to Noise Ratio: 68 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 4 mA typicalSwitch: Flat, roll-offWeight: 9.2 oz (262 g)Dimensions: 4.25" (108.0 mm) long, 3.31" (84.0 mm) maximum width, 0.91" (23.0 mm) heightOutput Connector: TB3M-typeCable: 25.0' (7.6 m) long, 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F and XLRM-type connectors

277 €
36 Instalments 9,56€ / month
Upon Order

The white-finished version of the U851R, the phantom-powered U851RW features a PivotPoint rotating output connector, UniSteep filter and UniGuard RFI-shielding technology. Offering outstanding speech intelligibility and transparent sound quality for surface-mount applications, the U851RW accepts interchangeable condenser elements - available for boundary microphones in cardioid, hypercardioid and omnidirectional polar patterns. With a heavy die-cast case and silicon foam bottom pads to minimize coupling of surface vibration to the microphone, the U851RW is equipped with self-contained electronics, eliminating the need for an external power module.Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)Frequency Response: 30-20,000 HzLow Frequency Roll Off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: 34 dB (19.9 mV) re 1V at 1 PaImpedance: 200 ohmsMaximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 108 dB, 1 kHz at Max SPLSignal to Noise Ratio: 68 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 4 mA typicalSwitch: Flat, roll-offWeight: 9.2 oz (262 g)Dimensions: 4.25" (108.0 mm) long, 3.31" (84.0 mm) maximum width, 0.91" (23.0 mm) heightOutput Connector: TB3M-typeCable: 25.0' (7.6 m) long, 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F and XLRM-type connectors

277 €
36 Instalments 9,56€ / month
Upon Order

Designed to deliver easy, flexible control in conference and boardroom installations, the versatile U891R cardioid condenser boundary microphone features an activation switch that can be set to three modes: press-on/press-off, press to talk, and press to mute. The phantom-powered microphone is equipped with a unique PivotPoint® rotating output connector and an LED status indicator. UniGuard innovations offer unsurpassed immunity from radio frequency interference interchangeable elements are available in cardioid, hypercardioid and omnidirectional polar patterns; an 80 Hz low-cut UniSteep  filter reduces pickup of low-frequency ambient noise. The microphone’s heavy die-cast case and silicon foam bottom pads minimize coupling of surface vibration to the microphone. The unit’s self-contained electronics eliminate the need for an external power module.Specifications: Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface) Freq Response: 30-20,000 Hz Low Freq Roll-Off: 80 Hz, 18 dB/octave Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa Impedance: 200 ohms Max Input Sound Level: 130 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range: 104 dB, 1 kHz at Max SPL Signal to Noise Ratio: 68 dB, 1 kHz at 1 Pa Phantom Power Requirements: 11-52V DC, 4 mA typical Weight: 264 g (9.3 oz) Dimensions(LxWxH): 4.25 x 3.31 x 0.91 inches Output Connector: TB3M-type Cable: 25 feet long, 2-conductor, shielded cable with TA3F-type and XLRM-type connectors

325 €
36 Instalments 11,22€ / month
Upon Order

The new Engineered Sound. Contractor-exclusive innovations for every acoustical challenge. And safe haven from RFI.This low-profile omnidirectional condenser boundary microphone is designed for clear, highly intelligible sound reinforcement, professional recording and teleconferencing in table-, ceiling-, or panel-mount applications. The microphone is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module. The microphone offers unsurpassed immunity from radio frequency interference thanks to Audio-Technica’s UniGuard® innovations. Protected by a rugged all-metal case with a two-layer steel mesh grille, the microphone has a 360° pickup angle, and is available in two colors: black (ES945) and white (ES945W). Specifications: Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Omnidirectional Freq Response: 40-18,000 Hz Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa Impedance: 200 ohms Max Input Sound Level: 142 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range (typical): 112 dB, 1 kHz at Max SPL Signal to Noise Ratio: 64 dB, 1 kHz at 1 Pa Phantom Power Requirements: 11-52V DC, 2 mA typical Weight: 63 g (2.2 oz) Dimensions(LxWxH): 69.0 mm (2.72") long, 28.0 mm (1.10") diameter Output Connector: Integral 3-pin XLRM-type

166 €
36 Instalments 5,73€ / month
Upon Order

The new Engineered Sound. Contractor-exclusive innovations for every acoustical challenge. And safe haven from RFI.This low-profile omnidirectional condenser boundary microphone is designed for clear, highly intelligible sound reinforcement, professional recording and teleconferencing in table-, ceiling-, or panel-mount applications. The microphone is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module. The microphone offers unsurpassed immunity from radio frequency interference thanks to Audio-Technica’s UniGuard® innovations. Protected by a rugged all-metal case with a two-layer steel mesh grille, the microphone has a 360° pickup angle, and is available in two colors: black (ES945) and white (ES945W). Specifications: Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Omnidirectional Freq Response: 40-18,000 Hz Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa Impedance: 200 ohms Max Input Sound Level: 142 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range (typical): 112 dB, 1 kHz at Max SPL Signal to Noise Ratio: 64 dB, 1 kHz at 1 Pa Phantom Power Requirements: 11-52V DC, 2 mA typical Weight: 63 g (2.2 oz) Dimensions(LxWxH): 69.0 mm (2.72") long, 28.0 mm (1.10") diameter Output Connector: Integral 3-pin XLRM-type

177 €
36 Instalments 6,11€ / month
Upon Order

The MEG 14-40-L features a made in Germany quality gooseneck microphone on an attractive price. A lightring indicates the spokesperson that is allowed to take the floor. It features a Sennheiser KE 10 microphone capsule with cardioid directivity for universal miking. The flexible element of the streamlined 40 cm gooseneck ensures precise alignment of the microphone. A XLR 5M connector delivers power for the red LED ring and connects the microphone signal.Features:Gooseneck with integrated Sennheiser KE10 microphone capsuleRF shielding against intermodulation from wireless devicesStreamlined design for seamless integrationPremium quality made in GermanySpecifications:Type: Condenser Pick Up Pattern: Cardioid Frequency response: 50Hz - 20 kHz Ιmpedance: < 100 Ohm Dimensions: L 450 mmWeight: 147 g

276 €
36 Instalments 9,53€ / month
In Stock

The new CHM 99 Condenser Hanging Microphone provides both ease of use and a high level of functionality. There is hardly any more affordable and simpler solution for recording choirs at worship centers. Suspended from the ceiling or a beam, the hanging microphone is aligned and then fixed in the correct position. Now use the spring steel clamp to adjust the correct angle, and off you go! The CHM 99 is available in white or black.

129 €
36 Instalments 4,45€ / month
4-10 days

The DGN 99 E features a built-in XLR connector for quick connection, while the DGN 99 has been designed for permanent (single-hole or screw-on) installation and comes with a 6-ft. 4-in. (2-m) fixed, unterminated cable.

142 €
36 Instalments 4,90€ / month
4-10 days

The CGN321 STS is a heavy duty professional tabletop microphone set with excellent shock absorbing properties. It features a CGN351 condenser gooseneck microphone with a cardioid polar pattern on a slim, 30 cm long gooseneck. This professional microphone is specially designed for inexperienced speakers who talk into the microphone from widely varying angles. The tabletop microphone set provides an extremely rugged switch capable of withstanding more than 25,000 switching cycles. It can be programmed for the following functions: push to talk, push to mute, push on/off, low cut on/off. A LED square clearly indicates the microphones status. The CGN321 STS comes with a professional, gold-plated 3-pin XLR audio output.Features: 30 cm slim line gooseneck microphoneSwitch with programmable functionsLED status squareHeavy duty metal housingGold plated connector Specifications:Audio frequency bandwidth: 70 to 18000 HzEquivalent noise level: 30 dB-ASignal to Noise: 64 dB-AElectrical impedance: 600 OhmsRecommended load impedance: 2000 OhmsVoltage: 9 to 52 VCurrent: 3 mAType: Balanced XLRGender: MaleContacts: 3-pinFinish: matte black 

290 €
36 Instalments 10,01€ / month
4-10 days