. go to top icon

Audio Technica ES995

SKU: APA2018-19792
  • 36  Instalments
  • 2 years warranty
    2 Years Warranty

Two microphones in one—perfect for applications requiring separate miking for PA and broadcast. The ES995 offers excellent sonic character, simple operation and streamlined appearance. One element is typically used to provide sound reinforcement while the other feeds clean audio to a broadcast netwo...more

  • 36  Instalments
  • 2 years warranty
    2 Years Warranty
399 €

VAT included and Κανονικά Μεταφορικά

Upon Order
Add to cart
apa support icon

NEED HELP?

Our expert engineers can assist you!

guide image

ONLINE GUIDE

Read our buyer's guide for Μικρόφωνα

Two microphones in one—perfect for applications requiring separate miking for PA and broadcast. The ES995 offers excellent sonic character, simple operation and streamlined appearance. One element is typically used to provide sound reinforcement while the other feeds clean audio to a broadcast network, media pool or logging recorder with no electrical interaction between the elements. The two elements can also feed audio to two separate installed systems in a church or school.

The circuit grounds for each channel are completely isolated, greatly reducing the potential for hum. Each element is individually shock-mounted. Robust table-mounted microphone is ideal for courtrooms, boardrooms, government chambers, schools and churches. Rigid-pipe design has ball-in-socket mounted to heavy, portable tabletop base. Integral dual power module; requires 11-52V DC phantom power. Optically coupled, lighted remote mute switch has three modes (push-to-mute, toggle, and push-to-talk). Interchangeable elements are available for omnidirectional and hypercardioid patterns. 19.51” long.

Specifications:

  • Elements: Two fixed-charge back plate, permanently polarized condensers

  • Polar Pattern: Cardioid

  • Frequency Response: 90-15,000 Hz

  • Low Frequency Roll-off: Fixed 120 Hz, 12 dB/octave

  • Open Circuit Sensitivity: -41 dB (8.9 mV) re 1V at 1 Pa

  • Impedance: 250 ohms

  • Maximum Input Sound Level: 138 dB SPL, 1 kHz at 1% T.H.D.

  • Dynamic Range (Typical): 109 dB, 1 kHz at Max SPL

  • Signal-To-Noise Ratio: 65 dB, 1 kHz at 1 Pa

  • Phantom Power Requirements: 11-52V DC, 3 mA typical

  • Switch: (on circuit board) SW1: Normal/-15 dB, SW2: Mute/Toggle/Talk, SW3: Off/On

  • Weight: 3.31 lb (1.5 kg)

  • Dimensions: 19.51" (495.6 mm) long, 1.51" (38.4 mm) maximum head diameter

  • Output Connector : Integral 6-pin XLRM-type

  • Cable: 30' (9.1 m) 6-conductor shielded "Y" cable - 6-pin XLRF to two 3-pin XLRM

  • Optional interchangeable elements: ESE-H hypercardioid (100º), ESE-0 omnidirectional (360º)

Write your Review

How would you rate this product?