Microphone Stands
Black tripod floor stand for microphone, with horizontal arm. Arm length: 750mm Minimum height: 790mm Maximum height: 1450mm Weight 2.7kg
More room for maneuvre! The flexible universal joint can be used on practically any microphone stand and gives you more freedom than ever by providing maximum flexibility for positioning a range of equipment such as microphones, hand-held recorders, etc. Included are a 3/8" female thread and 1/4" male thread. The integrated thread adapter allows for even more combinations.
Small foldable microphone stand with telescopic boom armHeight: 620 - 1470 mmBoom arm length: 490/795 mmThe height is adjusted by 2-fold non-marring height-adjustment mechanismsSwivel joint with clamp and the base made entirely of metalWeight: 3 kgColour: Black
Microphone Stand With noise reductive cast-iron base Height adjustable from 87 to 157 cm Weight: 3.6 kg Colour: Pure white
Microphone Stand Gray soft-touch coating Solo tripod with footfall sound absorbing iron base Diameter base: 25 cm Height adjustable 87 - 157.5 cm Weight: 3.6 kg
Microphone Stand With impact noise dampening cast base Base diameter: 250 mm Height-adjustable tube construction Height: 87 - 157 cm Weight: 2.8 kg Colour: Black
The K&M 25905 Low Profile Kick Drum Mic Stand is a kick drum mic stand, featuring a low profile, an adjustable bar, and an adjustable height from 380-600mm. The bar on this microphone stand can be adjusted from a length of 460mm to 765mmSpecifications:Kick drum mic standLow profileAdjustable bar: 460-765mmAdjustable height: 380-600mmWeight: 1.4 kg
The K&M 25900 Soft-Touch microphone boom stand makes it easy to mic low- to mid-height sound sources, while keeping your microphone's position very stable. The 25900 Soft-Touch stand comes with a handy 2-piece boom arm for accurate positioning, and its foldable legs give it a sturdy, solid base as well as convenient portability. Finished in a durable and classy gray powdercoat, this stand is built to take the rigors of the road and the exacting demands of the studio alike. You'll also appreciate the light weight (4.85 lbs.) of the 25900 Soft-Touch stand.
The new star in your show! The avant-garde, one-hand microphone stand is setting new standards in design and function. The elegant combination of triangular-shaped sections and the new design of the slender one-hand adjustment mechanism go harmoniously with standard microphone clips and microphones. The integrated knurled screw is impossible to lose and makes tightening and positioning the microphone clip easy. The stand's simple elegance loses nothing by the addition of König & Meyer's classic swivel arm. The height of the stand can be adjusted soundlessly, simply and easily using the unique one-hand clutch. The stand is significantly lightweight, but nonetheless stable due to the ingenious round base with an integrated steel plate with an attractive plastic cover. The base's circumferential rubber profile reduces undesirable vibration and footfall noise even when the stand is tilted far over to the side. Damage to flooring (e.g. parquet) is also prevented.
Mobile heavy steel microphone stand for studio or stage. 10 kg cast metal base, low centre of gravity for high level safety with 3 lockable castor wheels. Rod combination extends to over 2 m with additional locking mechanism. Extendable boom arm with a 3 kg counterweight and 5/8" connecting thread. Additional mini boom arm with 5/8"- and 3/8"- connecting thread, fully adjustable regardless of the position of the main boom arm, e.g. to use with studio microphones.
Extra low design for bass drums or special use. Die-cast base with folding legs. Comes complete with boom arm.
Consists of tubing assembly and extendable boom arm. Zinc die-cast base with long folding legs. Square swivel joint with large wing nut.
Perfect presentation and function: this heavy duty, large round base microphone stand is impressive both for the studio and on stage. The robust and tall tubing combination with the slim clutch provide a very tight and secure connection. A full circle anti-vibration rubber damping ring prevents unwanted floor vibration impacting the sound. The formidable base scores additional points for its clean design, visually appealing plastic covering and advanced functionality - and the integrated metal plate makes the stand extraordinarily stable. In addition, due to the extremely solid and stable base, an extendable boom arm can also be installed on the stand.
The telescopic microphone stand with a 3/8" threaded connector is extremely versatile. Its height can be adjusted from 230 to 400 mm using the practical clamping lever. This light-weight three-legged stand with folding legs is suitable for mobile operation. The robust foot end caps provide stability and reduce undesirable transmission noise.
Consisting of the ST301B and a standard boom arm, ST310 with a length of 84 cm. Includes cable fixation claps and 5/8" to 3/8" thread reduction. Height adjustable from 89 to 160 cm. Base spread diameter : 65 cm Screw base 3/8” Weight 3.5 kg.
Stable steel stand with broad completely level round cast-iron base-diameter 450 mm. Rod combination height adjustable using clamping screw and safety splint. Speaker will be fixed with flange adapter. Also available as monitor stand.
The industry standard for a mic stand and boom arm combination. Package consists of the 201A/2 microphone stand and the 211 boom arm. Folding base for ease of transport. Long legs for added stability. The 210/2 - a classic for 30 years. More than 2 million sold.
Boom microphone stand with telescopic boom and folding tripod base.
Boom microphone stand with telescopic boom and folding tripod base.
Βάση μικροφώνου δαπέδου με οριζόντιο βραχίονα και βάση 3 ποδιών. Χρώμα μαύρο
Low profile round-base mic stand with telescopic boom arm, designed for bass drums and acoustic instruments. Heavy cast-iron round base, with anti-vibration rubber insert for noise filtration. Wt: 6.0 kg, H: 430 mm, BL: 425/725 mm, base-diameter 250 mm.
High-quality microphone stand with telescopic boom arm. Die-cast base with folding legs. Unique design retains all screws and levers without tension. Patented clamping lever can be fixed in any position, for holding mic cable, etc. Wt: 3.4 kg, H: 970/1640 mm, BL: 600/955 mm.
Straight, Tripod with Fixed Length BoomHeight adjustment range: 37.75" to 62" - 95.9 to 157.5cmBoom length: 30" - 76.2cmDiameter of leg spread: 27.25' - 69.2cmFolded height: 38" - 96.5cmWeight: 4.2lb - 1.9kg