Floorstandind Speakers

The Prestige Facet 14F is a 2-and-a-half-way floorstanding speaker. Equally clear and detailed in the highs as it is deep and lively in the lows, this speaker will allow you to rediscover your favorite tracks. The Elipson Prestige Facet 14F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 14F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This floorstanding speaker is equipped with a bass driver and a 17 cm mid-low driver. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience. Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel. At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals. Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 14F's high sensitivity allows it to be paired with any amplifier with a power rating of 150 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Specifications : Speaker Floorstanding Number of way 2½ Power 150 W RMS Tweeter1 " Mid-bass driver 6,5 " Woofer 6,5 " Frequency Response (±3 dB)38 Hz - 25 kHz Sensitivity 92 dB/1W/1m Impedance 6 Ohms binding post Specific double Terminals Silver plated for bi-wiring or bi-amp Custom-made loudspeakers Rubber edge Loudspeakers On specifications Reinforcement Internals Removable base and spikes Amovible Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)238 x 1026 x 351 mm Weight20,5 kg Dimensions packaging (W x H x D)315 x 1120 x 400 mm Weight with packaging, unit22,6 kg

Be surprised by Kanta, highly original speakers that will reconnect you with your music. Entirely dedicated to acoustic performance and with a resolutely disruptive aesthetic: that, in a nutshell, is the Kanta DNA! It took three years of research and development to create this model, Kanta No. 2, the first in the range. With their new materials and effectiveness-focused design that give them their powerful identity, they come straight from our engineers' hearts.

The LS1c is the flagship of our LS1 active loudspeaker series. It is named after the revolutionary TPCD Carbon Composite tweeter that we developed in cooperation with driver manufacturer Seas. Even more important is that we rebuilt all elements of the LS1 design from the ground up: New electronics with latest generation amplifiers, New audio DSP code, New computer aided calibration method, New firmware New PC/Mac software that controls the entire system. To pick just one example, with the knowledge we gained from developing the MU1 and MU2 FPGA Pure Nyquist filters, we were able to dramatically improve the crossover phase correction filters of the LS1c’s DSP. The LS1c offers an incredible level of integration over the full frequency band The loudspeaker has never sounded so much ‘as one’. Its rendering of the stereo image appears more tactile than ever, its capability for microdynamics exposes unheard details and its extraordinary phase coherency reveals the subtlest rhythmic structures. At the same time the natural, non-fatiguing sound of the LS1c invites one to long listening sessions. “All elements of the LS1 design were rebuilt from the ground up.” At the low end of the frequency spectrum,The elegant Digital Motional Feedback SB1 subwoofer offers unparalleled bass. Our unique motion feedback technology lowers the distortion by 30 dB and places the resonance frequency below 20 Hz. Bass has never sounded so detailed and controlled. A natural companion for the LS1c is the MU1 music player that allows control of all loudspeaker parameters. But an LS1c is equally happy when combined with the LS1r controller and the LS1i USB interface. The cabinet can be ordered in a stylish ‘Hi-Macs’ synthetic stone finish, or in our traditional bamboo veneer or lacquer look.

With its high-quality sound rendering, Theva N°3 is the Hi-Fi floorstanding loudspeaker par excellence. Listening experiences are dynamic, precise and powerful thanks to its TNF tweeter and its three Slatefiber cone speaker drivers, both exclusive Focal technologies. The tilt of its stand (Time Alignment) provides an optimal soundstage, focused on the listener, for flawless precision.Made in France, Theva N°3 has a design with delicate, refined details. With an additional front panel, sleek black or wood finishes, metallic and screen-printed rings, magnetic grille and rear vent positioning, every single detail is highly refined.To create a sensational complete stereo system or Home Cinema, look no further than the Theva N°1, Theva N°2, Theva N°3-D, Theva Center, Theva Surround and SUB 600P subwoofer.

NEW SPEAKERS: BOREA BR10The new BOREA flagshipSince the launch of the BOREA range in 2019, TRIANGLE has enjoyed resounding success on the international scene. The manufacturer has left its mark while maintaining this same philosophy, which is to share this passion and this love of music through quality speakers within a controlled budget.TRIANGLE today unveils a new reference model for the range, the BOREA BR10. Featuring 21cm woofers, the development team offers a speaker with more generous dimensions for increased performance.BOREA SOUND SIGNATUREThe use of 21cm drivers makes it possible to extend the bandwidth in the low frequency register. However, the 25mm silk dome tweeter fitted with the waveguide (EFS Technology), as well as the midrange and its natural cellulose pulp membrane coupled with its small pleat suspension, remain unchanged.The sound signature of the range is thus preserved, allowing a multitude of compositions, while ensuring a homogeneous tone.HI-FI & HOME CINEMA VERSATILITYThe Borea BR10 is capable of reproducing a wide sound spectrum, giving it great versatility in terms of use.Recommended for rooms larger than 30m2, it can also be used as a main speaker for your home cinema installations.

Elipson Prestige Facet II 34F Matte Black (pair)The flagship of the Prestige Facet II range, the Elipson Prestige Facet II 34F floorstanding speaker improves on the multi-award-winning best-selling Elipson Prestige Facet 34F by incorporating the brand's latest aesthetic and technical innovations. The cabinet benefits from structural reinforcements for increased rigidity and better driver control. The crossover has been completely redesigned for increased transparency and to exploit the full musicality of the 3-way architecture with dual 25 cm woofers, dual 17 cm midrange drivers and 25 mm tweeters. A signature of the range, a faceted crown surrounds the drivers to reduce diffraction and maximize linearity. The assurance of precise reproduction in hi-fi and home theater! A classic perfectedThe Elipson Prestige Facet II 34F speakers retain the DNA of their predecessor while refining every point to deliver even more grandiose performances. The thick MDF cabinet thus benefits from a reinforced structure to best eliminate internal vibrations and resonances. In addition, the geometry of these internal reinforcements has been completely redesigned. Their new design has been meticulously studied to provide better mechanical support to the speakers, particularly at frequencies where the excursion of the membranes exerts significant stress on the cabinet. The front panel is made of two materials of different densities and thicknesses to avoid any unwanted interference. This same front panel is also embellished with a satin finish, more understated and elegant to facilitate the integration of the speakers into any interior. The stands also gain in modernity while offering optimal decoupling.Dual 25cm bass speakerThe Elipson Prestige Facet II 34F floorstanding speaker retains the excellent acoustic design of its predecessor, with a 3-way architecture. This uses two large 25 cm diameter bass drivers. They are equipped with a generously sized voice coil, which provides high power handling and guarantees maximum cooling during strong power increases. These two drivers share the same bass-reflex load with a long-profile flared vent allowing for low-frequency tuning. Thanks to this design, the Elipson Prestige Facet II 34F speaker is capable of delivering powerful, deep and generous bass. Dual bullet midrange driverThe dual midrange driver in the Elipson Prestige Facet II 34F speaker is a 17 cm diameter model. The rigid membrane features a central metal cone. This improves control over the membrane's movements to limit turbulence, which can cause distortion. It also absorbs unwanted vibrations and dissipates them, reducing noise and improving the accuracy of reproduction. The Elipson Prestige Facet II 34F speaker delivers very rich, well-textured, and very natural midrange.Faceted crownThese speakers are combined with a 25 mm diameter soft dome tweeter. This model ensures excellent transient response and perfect control of high frequencies down to 25 Hz. Exclusive to the Elipson Prestige Facet II speaker range, a custom-cut synthetic rubber crown surrounds each speaker to limit the baffle effect and diffraction. The response curve is thus less disturbed, more linear, for a smoother listening experience.Audiophile filterTo ensure lossless sound distribution, the Elipson Prestige Facet II 34F speaker benefits from a completely redesigned audiophile-grade passive crossover. This notably uses low-resistance inductors for a more energetic and impactful bass, while being better controlled. Polypropylene capacitors allow for greater richness in the high frequencies and metal film resistors ensure perfect separation. This redesign of the crossover allows for better channel decoupling, a smoother frequency response and a more coherent and natural soundstage. The wiring between this crossover and the loudspeakers is carried out using very high-purity 2.25 mm² oxygen-free copper conductors to ensure that even the slightest musical information is preserved throughout the entire path. Like all speakers in the range, the Elipson Prestige Facet II 34F floorstanding speaker features a high-end dual terminal block compatible with bi-wiring and bi-amping. The contacts are silver-plated to maximize signal transmission and support banana plugs, spades, and heavy-gauge cables. The Elipson Prestige Facet II 34F floorstanding speaker is characterized by its very high power handling and extraordinary bass range. When it produces music, this translates into great neutrality and the presence it gives to the music. Devoid of any coloration, it delivers its score without adding or subtracting anything from the original recording. Listening reveals a feeling of softness and serenity, each piece being faithfully reproduced, with control and without aggression. Designed with an audiophile approach, the Elipson Prestige Facet II 34F speaker is intended to be associated with any high-fidelity amplifier with a maximum power of 350 watts per channel. Its rigorous behavior and dynamic qualities make it an excellent choice for a stereo hi-fi installation or multi-channel home theater system in which it will very effectively handle the reproduction of the front left and right channels.HighlightsAudiophile quality filterDual 25cm bass speakerSoftness and precisionHigh sensitivityVery nice finish

Elipson Prestige Facet II 34F Matte Black (pair)The flagship of the Prestige Facet II range, the Elipson Prestige Facet II 34F floorstanding speaker improves on the multi-award-winning best-selling Elipson Prestige Facet 34F by incorporating the brand's latest aesthetic and technical innovations. The cabinet benefits from structural reinforcements for increased rigidity and better driver control. The crossover has been completely redesigned for increased transparency and to exploit the full musicality of the 3-way architecture with dual 25 cm woofers, dual 17 cm midrange drivers and 25 mm tweeters. A signature of the range, a faceted crown surrounds the drivers to reduce diffraction and maximize linearity. The assurance of precise reproduction in hi-fi and home theater! A classic perfectedThe Elipson Prestige Facet II 34F speakers retain the DNA of their predecessor while refining every point to deliver even more grandiose performances. The thick MDF cabinet thus benefits from a reinforced structure to best eliminate internal vibrations and resonances. In addition, the geometry of these internal reinforcements has been completely redesigned. Their new design has been meticulously studied to provide better mechanical support to the speakers, particularly at frequencies where the excursion of the membranes exerts significant stress on the cabinet. The front panel is made of two materials of different densities and thicknesses to avoid any unwanted interference. This same front panel is also embellished with a satin finish, more understated and elegant to facilitate the integration of the speakers into any interior. The stands also gain in modernity while offering optimal decoupling.Dual 25cm bass speakerThe Elipson Prestige Facet II 34F floorstanding speaker retains the excellent acoustic design of its predecessor, with a 3-way architecture. This uses two large 25 cm diameter bass drivers. They are equipped with a generously sized voice coil, which provides high power handling and guarantees maximum cooling during strong power increases. These two drivers share the same bass-reflex load with a long-profile flared vent allowing for low-frequency tuning. Thanks to this design, the Elipson Prestige Facet II 34F speaker is capable of delivering powerful, deep and generous bass. Dual bullet midrange driverThe dual midrange driver in the Elipson Prestige Facet II 34F speaker is a 17 cm diameter model. The rigid membrane features a central metal cone. This improves control over the membrane's movements to limit turbulence, which can cause distortion. It also absorbs unwanted vibrations and dissipates them, reducing noise and improving the accuracy of reproduction. The Elipson Prestige Facet II 34F speaker delivers very rich, well-textured, and very natural midrange.Faceted crownThese speakers are combined with a 25 mm diameter soft dome tweeter. This model ensures excellent transient response and perfect control of high frequencies down to 25 Hz. Exclusive to the Elipson Prestige Facet II speaker range, a custom-cut synthetic rubber crown surrounds each speaker to limit the baffle effect and diffraction. The response curve is thus less disturbed, more linear, for a smoother listening experience.Audiophile filterTo ensure lossless sound distribution, the Elipson Prestige Facet II 34F speaker benefits from a completely redesigned audiophile-grade passive crossover. This notably uses low-resistance inductors for a more energetic and impactful bass, while being better controlled. Polypropylene capacitors allow for greater richness in the high frequencies and metal film resistors ensure perfect separation. This redesign of the crossover allows for better channel decoupling, a smoother frequency response and a more coherent and natural soundstage. The wiring between this crossover and the loudspeakers is carried out using very high-purity 2.25 mm² oxygen-free copper conductors to ensure that even the slightest musical information is preserved throughout the entire path. Like all speakers in the range, the Elipson Prestige Facet II 34F floorstanding speaker features a high-end dual terminal block compatible with bi-wiring and bi-amping. The contacts are silver-plated to maximize signal transmission and support banana plugs, spades, and heavy-gauge cables. The Elipson Prestige Facet II 34F floorstanding speaker is characterized by its very high power handling and extraordinary bass range. When it produces music, this translates into great neutrality and the presence it gives to the music. Devoid of any coloration, it delivers its score without adding or subtracting anything from the original recording. Listening reveals a feeling of softness and serenity, each piece being faithfully reproduced, with control and without aggression. Designed with an audiophile approach, the Elipson Prestige Facet II 34F speaker is intended to be associated with any high-fidelity amplifier with a maximum power of 350 watts per channel. Its rigorous behavior and dynamic qualities make it an excellent choice for a stereo hi-fi installation or multi-channel home theater system in which it will very effectively handle the reproduction of the front left and right channels.HighlightsAudiophile quality filterDual 25cm bass speakerSoftness and precisionHigh sensitivityVery nice finish

Elipson Prestige Facet II 34F Matte Black (pair)The flagship of the Prestige Facet II range, the Elipson Prestige Facet II 34F floorstanding speaker improves on the multi-award-winning best-selling Elipson Prestige Facet 34F by incorporating the brand's latest aesthetic and technical innovations. The cabinet benefits from structural reinforcements for increased rigidity and better driver control. The crossover has been completely redesigned for increased transparency and to exploit the full musicality of the 3-way architecture with dual 25 cm woofers, dual 17 cm midrange drivers and 25 mm tweeters. A signature of the range, a faceted crown surrounds the drivers to reduce diffraction and maximize linearity. The assurance of precise reproduction in hi-fi and home theater! A classic perfectedThe Elipson Prestige Facet II 34F speakers retain the DNA of their predecessor while refining every point to deliver even more grandiose performances. The thick MDF cabinet thus benefits from a reinforced structure to best eliminate internal vibrations and resonances. In addition, the geometry of these internal reinforcements has been completely redesigned. Their new design has been meticulously studied to provide better mechanical support to the speakers, particularly at frequencies where the excursion of the membranes exerts significant stress on the cabinet. The front panel is made of two materials of different densities and thicknesses to avoid any unwanted interference. This same front panel is also embellished with a satin finish, more understated and elegant to facilitate the integration of the speakers into any interior. The stands also gain in modernity while offering optimal decoupling.Dual 25cm bass speakerThe Elipson Prestige Facet II 34F floorstanding speaker retains the excellent acoustic design of its predecessor, with a 3-way architecture. This uses two large 25 cm diameter bass drivers. They are equipped with a generously sized voice coil, which provides high power handling and guarantees maximum cooling during strong power increases. These two drivers share the same bass-reflex load with a long-profile flared vent allowing for low-frequency tuning. Thanks to this design, the Elipson Prestige Facet II 34F speaker is capable of delivering powerful, deep and generous bass. Dual bullet midrange driverThe dual midrange driver in the Elipson Prestige Facet II 34F speaker is a 17 cm diameter model. The rigid membrane features a central metal cone. This improves control over the membrane's movements to limit turbulence, which can cause distortion. It also absorbs unwanted vibrations and dissipates them, reducing noise and improving the accuracy of reproduction. The Elipson Prestige Facet II 34F speaker delivers very rich, well-textured, and very natural midrange.Faceted crownThese speakers are combined with a 25 mm diameter soft dome tweeter. This model ensures excellent transient response and perfect control of high frequencies down to 25 Hz. Exclusive to the Elipson Prestige Facet II speaker range, a custom-cut synthetic rubber crown surrounds each speaker to limit the baffle effect and diffraction. The response curve is thus less disturbed, more linear, for a smoother listening experience.Audiophile filterTo ensure lossless sound distribution, the Elipson Prestige Facet II 34F speaker benefits from a completely redesigned audiophile-grade passive crossover. This notably uses low-resistance inductors for a more energetic and impactful bass, while being better controlled. Polypropylene capacitors allow for greater richness in the high frequencies and metal film resistors ensure perfect separation. This redesign of the crossover allows for better channel decoupling, a smoother frequency response and a more coherent and natural soundstage. The wiring between this crossover and the loudspeakers is carried out using very high-purity 2.25 mm² oxygen-free copper conductors to ensure that even the slightest musical information is preserved throughout the entire path. Like all speakers in the range, the Elipson Prestige Facet II 34F floorstanding speaker features a high-end dual terminal block compatible with bi-wiring and bi-amping. The contacts are silver-plated to maximize signal transmission and support banana plugs, spades, and heavy-gauge cables. The Elipson Prestige Facet II 34F floorstanding speaker is characterized by its very high power handling and extraordinary bass range. When it produces music, this translates into great neutrality and the presence it gives to the music. Devoid of any coloration, it delivers its score without adding or subtracting anything from the original recording. Listening reveals a feeling of softness and serenity, each piece being faithfully reproduced, with control and without aggression. Designed with an audiophile approach, the Elipson Prestige Facet II 34F speaker is intended to be associated with any high-fidelity amplifier with a maximum power of 350 watts per channel. Its rigorous behavior and dynamic qualities make it an excellent choice for a stereo hi-fi installation or multi-channel home theater system in which it will very effectively handle the reproduction of the front left and right channels.HighlightsAudiophile quality filterDual 25cm bass speakerSoftness and precisionHigh sensitivityVery nice finish

Elipson Prestige Facet II 24F Matte White (pair)The Elipson Prestige Facet II 24F floorstanding speaker improves on the multi-award-winning best-selling Elipson Prestige Facet 24F by incorporating the brand's latest aesthetic and technical innovations. The cabinet benefits from structural reinforcements for increased rigidity and better driver control. The crossover has been completely redesigned for increased transparency and to exploit the full musicality of the 3.5-way architecture with dual 21 cm woofers, 17 cm midrange and 25 mm tweeter. Emblematic of the range, a faceted crown surrounds the drivers to reduce diffraction and maximize linearity. The assurance of precise reproduction in hi-fi as well as home theater! A classic perfectedThe Elipson Prestige Facet II 24F speakers retain the DNA of their predecessor while refining every point to deliver even more grandiose performance. The thick MDF cabinet thus benefits from a reinforced structure to best eliminate internal vibrations and resonances. In addition, the geometry of these internal reinforcements has been completely redesigned. Their new design has been meticulously studied to provide better mechanical support to the speakers, particularly at frequencies where the excursion of the membranes exerts significant stress on the cabinet. The front panel is made of two materials of different densities and thicknesses to avoid any unwanted interference. This same front panel is also embellished with a satin finish, more understated and elegant to facilitate the integration of the speakers into any interior. The stands also gain in modernity while offering optimal decoupling.Dual 21cm bass speakerThe Elipson Prestige Facet II 24F floorstanding speaker retains the excellent acoustic design of its predecessor, with a 3.5-way architecture. This uses two large 21 cm diameter bass drivers. They are equipped with a generously sized voice coil, which provides high power handling and guarantees maximum cooling during strong power increases. These two drivers share the same bass-reflex load with a long-profile flared vent allowing for low-frequency tuning. Thanks to this design, the Elipson Prestige Facet II 24F speaker is capable of delivering powerful, deep and generous bass. Medium with central ogiveThe midrange driver in the Elipson Prestige Facet II 24F speaker is a 17 cm diameter model. The rigid membrane features a central metal cone. This improves control over the membrane's movements to limit turbulence, which can cause distortion. It also absorbs unwanted vibrations and dissipates them, reducing noise and improving the accuracy of reproduction. The Elipson Prestige Facet II 24F speaker delivers very rich, well-textured, and very natural midrange.Faceted crownThese speakers are combined with a 25 mm diameter soft dome tweeter. This model ensures excellent transient response and perfect control of high frequencies down to 25 Hz. Exclusive to the Elipson Prestige Facet II speaker range, a custom-cut synthetic rubber crown surrounds each speaker to limit the baffle effect and diffraction. The response curve is thus less disturbed, more linear, for a smoother listening experience.Audiophile filterTo ensure lossless sound distribution, the Elipson Prestige Facet II 24F speaker benefits from a completely redesigned audiophile-grade passive crossover. This notably uses low-resistance inductors for a more energetic and impactful bass, while being better controlled. Polypropylene capacitors allow for more richness in the high frequencies and metal film resistors ensure perfect separation. This redesign of the crossover allows for better channel decoupling, a smoother frequency response and a more coherent and natural soundstage. The wiring between this crossover and the loudspeakers is carried out using very high-purity 2.25 mm² oxygen-free copper conductors to ensure that every last musical information is preserved throughout the entire path. Like all speakers in the range, the Elipson Prestige Facet II 24F floorstanding speaker features a high-end dual terminal block compatible with bi-wiring and bi-amping. The contacts are silver-plated to maximize signal transmission and support banana plugs, spades, and heavy-gauge cables. The Elipson Prestige Facet II 24F floorstanding speaker is characterized by its neutrality and accuracy. Devoid of any coloration, it delivers its score without adding or subtracting anything from the original recording. Listening reveals a feeling of softness and serenity, each piece being reproduced faithfully, with control and without aggression. Designed with an audiophile approach, the Elipson Prestige Facet II 24F speaker is intended to be associated with any high-fidelity amplifier with a power less than or equal to 350 Watts per channel. However, its rigorous behavior and dynamic qualities make it an excellent choice for a stereo hi-fi installation or multi-channel home theater system in which it will effectively handle the reproduction of the front left and right channels.HighlightsAudiophile quality filterPowerful bassSoftness and precisionHigh sensitivityVery nice finish

Elipson Prestige Facet II 24F Matte White (pair)The Elipson Prestige Facet II 24F floorstanding speaker improves on the multi-award-winning best-selling Elipson Prestige Facet 24F by incorporating the brand's latest aesthetic and technical innovations. The cabinet benefits from structural reinforcements for increased rigidity and better driver control. The crossover has been completely redesigned for increased transparency and to exploit the full musicality of the 3.5-way architecture with dual 21 cm woofers, 17 cm midrange and 25 mm tweeter. Emblematic of the range, a faceted crown surrounds the drivers to reduce diffraction and maximize linearity. The assurance of precise reproduction in hi-fi as well as home theater! A classic perfectedThe Elipson Prestige Facet II 24F speakers retain the DNA of their predecessor while refining every point to deliver even more grandiose performance. The thick MDF cabinet thus benefits from a reinforced structure to best eliminate internal vibrations and resonances. In addition, the geometry of these internal reinforcements has been completely redesigned. Their new design has been meticulously studied to provide better mechanical support to the speakers, particularly at frequencies where the excursion of the membranes exerts significant stress on the cabinet. The front panel is made of two materials of different densities and thicknesses to avoid any unwanted interference. This same front panel is also embellished with a satin finish, more understated and elegant to facilitate the integration of the speakers into any interior. The stands also gain in modernity while offering optimal decoupling.Dual 21cm bass speakerThe Elipson Prestige Facet II 24F floorstanding speaker retains the excellent acoustic design of its predecessor, with a 3.5-way architecture. This uses two large 21 cm diameter bass drivers. They are equipped with a generously sized voice coil, which provides high power handling and guarantees maximum cooling during strong power increases. These two drivers share the same bass-reflex load with a long-profile flared vent allowing for low-frequency tuning. Thanks to this design, the Elipson Prestige Facet II 24F speaker is capable of delivering powerful, deep and generous bass. Medium with central ogiveThe midrange driver in the Elipson Prestige Facet II 24F speaker is a 17 cm diameter model. The rigid membrane features a central metal cone. This improves control over the membrane's movements to limit turbulence, which can cause distortion. It also absorbs unwanted vibrations and dissipates them, reducing noise and improving the accuracy of reproduction. The Elipson Prestige Facet II 24F speaker delivers very rich, well-textured, and very natural midrange.Faceted crownThese speakers are combined with a 25 mm diameter soft dome tweeter. This model ensures excellent transient response and perfect control of high frequencies down to 25 Hz. Exclusive to the Elipson Prestige Facet II speaker range, a custom-cut synthetic rubber crown surrounds each speaker to limit the baffle effect and diffraction. The response curve is thus less disturbed, more linear, for a smoother listening experience.Audiophile filterTo ensure lossless sound distribution, the Elipson Prestige Facet II 24F speaker benefits from a completely redesigned audiophile-grade passive crossover. This notably uses low-resistance inductors for a more energetic and impactful bass, while being better controlled. Polypropylene capacitors allow for more richness in the high frequencies and metal film resistors ensure perfect separation. This redesign of the crossover allows for better channel decoupling, a smoother frequency response and a more coherent and natural soundstage. The wiring between this crossover and the loudspeakers is carried out using very high-purity 2.25 mm² oxygen-free copper conductors to ensure that every last musical information is preserved throughout the entire path. Like all speakers in the range, the Elipson Prestige Facet II 24F floorstanding speaker features a high-end dual terminal block compatible with bi-wiring and bi-amping. The contacts are silver-plated to maximize signal transmission and support banana plugs, spades, and heavy-gauge cables. The Elipson Prestige Facet II 24F floorstanding speaker is characterized by its neutrality and accuracy. Devoid of any coloration, it delivers its score without adding or subtracting anything from the original recording. Listening reveals a feeling of softness and serenity, each piece being reproduced faithfully, with control and without aggression. Designed with an audiophile approach, the Elipson Prestige Facet II 24F speaker is intended to be associated with any high-fidelity amplifier with a power less than or equal to 350 Watts per channel. However, its rigorous behavior and dynamic qualities make it an excellent choice for a stereo hi-fi installation or multi-channel home theater system in which it will effectively handle the reproduction of the front left and right channels.HighlightsAudiophile quality filterPowerful bassSoftness and precisionHigh sensitivityVery nice finish

Elipson Prestige Facet II 24F Matte White (pair)The Elipson Prestige Facet II 24F floorstanding speaker improves on the multi-award-winning best-selling Elipson Prestige Facet 24F by incorporating the brand's latest aesthetic and technical innovations. The cabinet benefits from structural reinforcements for increased rigidity and better driver control. The crossover has been completely redesigned for increased transparency and to exploit the full musicality of the 3.5-way architecture with dual 21 cm woofers, 17 cm midrange and 25 mm tweeter. Emblematic of the range, a faceted crown surrounds the drivers to reduce diffraction and maximize linearity. The assurance of precise reproduction in hi-fi as well as home theater! A classic perfectedThe Elipson Prestige Facet II 24F speakers retain the DNA of their predecessor while refining every point to deliver even more grandiose performance. The thick MDF cabinet thus benefits from a reinforced structure to best eliminate internal vibrations and resonances. In addition, the geometry of these internal reinforcements has been completely redesigned. Their new design has been meticulously studied to provide better mechanical support to the speakers, particularly at frequencies where the excursion of the membranes exerts significant stress on the cabinet. The front panel is made of two materials of different densities and thicknesses to avoid any unwanted interference. This same front panel is also embellished with a satin finish, more understated and elegant to facilitate the integration of the speakers into any interior. The stands also gain in modernity while offering optimal decoupling.Dual 21cm bass speakerThe Elipson Prestige Facet II 24F floorstanding speaker retains the excellent acoustic design of its predecessor, with a 3.5-way architecture. This uses two large 21 cm diameter bass drivers. They are equipped with a generously sized voice coil, which provides high power handling and guarantees maximum cooling during strong power increases. These two drivers share the same bass-reflex load with a long-profile flared vent allowing for low-frequency tuning. Thanks to this design, the Elipson Prestige Facet II 24F speaker is capable of delivering powerful, deep and generous bass. Medium with central ogiveThe midrange driver in the Elipson Prestige Facet II 24F speaker is a 17 cm diameter model. The rigid membrane features a central metal cone. This improves control over the membrane's movements to limit turbulence, which can cause distortion. It also absorbs unwanted vibrations and dissipates them, reducing noise and improving the accuracy of reproduction. The Elipson Prestige Facet II 24F speaker delivers very rich, well-textured, and very natural midrange.Faceted crownThese speakers are combined with a 25 mm diameter soft dome tweeter. This model ensures excellent transient response and perfect control of high frequencies down to 25 Hz. Exclusive to the Elipson Prestige Facet II speaker range, a custom-cut synthetic rubber crown surrounds each speaker to limit the baffle effect and diffraction. The response curve is thus less disturbed, more linear, for a smoother listening experience.Audiophile filterTo ensure lossless sound distribution, the Elipson Prestige Facet II 24F speaker benefits from a completely redesigned audiophile-grade passive crossover. This notably uses low-resistance inductors for a more energetic and impactful bass, while being better controlled. Polypropylene capacitors allow for more richness in the high frequencies and metal film resistors ensure perfect separation. This redesign of the crossover allows for better channel decoupling, a smoother frequency response and a more coherent and natural soundstage. The wiring between this crossover and the loudspeakers is carried out using very high-purity 2.25 mm² oxygen-free copper conductors to ensure that every last musical information is preserved throughout the entire path. Like all speakers in the range, the Elipson Prestige Facet II 24F floorstanding speaker features a high-end dual terminal block compatible with bi-wiring and bi-amping. The contacts are silver-plated to maximize signal transmission and support banana plugs, spades, and heavy-gauge cables. The Elipson Prestige Facet II 24F floorstanding speaker is characterized by its neutrality and accuracy. Devoid of any coloration, it delivers its score without adding or subtracting anything from the original recording. Listening reveals a feeling of softness and serenity, each piece being reproduced faithfully, with control and without aggression. Designed with an audiophile approach, the Elipson Prestige Facet II 24F speaker is intended to be associated with any high-fidelity amplifier with a power less than or equal to 350 Watts per channel. However, its rigorous behavior and dynamic qualities make it an excellent choice for a stereo hi-fi installation or multi-channel home theater system in which it will effectively handle the reproduction of the front left and right channels.HighlightsAudiophile quality filterPowerful bassSoftness and precisionHigh sensitivityVery nice finish

Elipson Prestige Facet II 14F Matte White (pair)The Elipson Prestige Facet II 14F floorstanding speaker improves on the award-winning best-selling Elipson Prestige Facet 14F by incorporating the brand's latest aesthetic and technical innovations. The cabinet benefits from structural reinforcements for increased rigidity and better driver control. The crossover has been completely redesigned for increased transparency and to exploit the full musicality of the 2.5-way architecture with dual 17 cm drivers and 25 mm tweeters. A signature of the range, a faceted crown surrounds the drivers to reduce diffraction and maximize linearity. The assurance of precise reproduction in hi-fi and home theater! A classic perfectedThe Elipson Prestige Facet II 14F speakers retain the DNA of their predecessor while refining every point to deliver even more grandiose performance. The thick MDF cabinet thus benefits from a reinforced structure to best eliminate internal vibrations and resonances. In addition, the geometry of these internal reinforcements has been completely redesigned. Their new design has been meticulously studied to provide better mechanical support to the speakers, particularly at frequencies where the excursion of the cones exerts significant stress on the cabinet. The front panel is made of two materials of different densities and thicknesses to avoid any unwanted interference. This same front panel is also embellished with a satin finish, more understated and elegant to facilitate the integration of the speakers into any interior. The stands also gain in modernity while offering optimal decoupling. 17 cm bass speaker The Elipson Prestige Facet II 14F floorstanding speaker retains the excellent acoustic design of its predecessor, with a 2.5-way architecture. This uses a large 17 cm diameter bass driver. It is equipped with a generously sized voice coil, which provides high power handling and guarantees maximum cooling during strong power increases. This driver is loaded with a bass-reflex with a long-profile flared vent allowing for low-frequency tuning. Thanks to this design, the Elipson Prestige Facet II 14F speaker is capable of delivering powerful and generous bass. Medium with central ogive The midrange/bass driver in the Elipson Prestige Facet II 14F is also a 17 cm diameter model. The rigid cone features a central metal cone. This improves control over the cone's movements to limit turbulence, which can cause distortion. It also absorbs unwanted vibrations and dissipates them, reducing noise and improving the accuracy of reproduction. The Elipson Prestige Facet II 14F speaker delivers very rich, well-textured, and very natural midrange.Faceted crownThese speakers are combined with a 25 mm diameter soft dome tweeter. This model ensures excellent transient response and perfect control of high frequencies down to 25 Hz. Exclusive to the Elipson Prestige Facet II speaker range, a custom-cut synthetic rubber crown surrounds each speaker to limit the baffle effect and diffraction. The response curve is thus less disturbed, more linear, for a smoother listening experience.Audiophile filterTo ensure lossless sound distribution, the Elipson Prestige Facet II 14F speaker benefits from a completely redesigned audiophile-grade passive crossover. This notably uses low-resistance inductors for a more energetic and impactful bass, while being better controlled. Polypropylene capacitors allow for greater richness in the high frequencies and metal film resistors ensure perfect separation. This redesign of the crossover allows for better channel decoupling, a smoother frequency response and a more coherent and natural soundstage. The wiring between this crossover and the loudspeakers is carried out using very high-purity 2.25 mm² oxygen-free copper conductors to ensure that every last musical information is preserved throughout the entire path. Like all speakers in the range, the Elipson Prestige Facet II 14F floorstanding speaker features a high-end dual terminal block compatible with bi-wiring and bi-amping. The contacts are silver-plated to maximize signal transmission and support banana plugs, spades, and heavy-gauge cables. The Elipson Prestige Facet II 14F floorstanding speaker is characterized by its neutrality and accuracy. Devoid of any coloration, it delivers its score without adding or subtracting anything from the original recording. Listening reveals a feeling of softness and serenity, each piece being reproduced faithfully, with control and without aggression. Designed with an audiophile approach, the Elipson Prestige Facet II 14F speaker is intended to be associated with any high-fidelity amplifier with a power less than or equal to 200 watts per channel. However, its rigorous behavior and dynamic qualities make it an excellent choice for a multi-channel home theater system in which it will effectively handle the reproduction of the front left and right channels.HighlightsAudiophile quality filter17 cm speakersSoftness and precisionHigh sensitivityVery nice finish

Elipson Prestige Facet II 14F Matte White (pair)The Elipson Prestige Facet II 14F floorstanding speaker improves on the award-winning best-selling Elipson Prestige Facet 14F by incorporating the brand's latest aesthetic and technical innovations. The cabinet benefits from structural reinforcements for increased rigidity and better driver control. The crossover has been completely redesigned for increased transparency and to exploit the full musicality of the 2.5-way architecture with dual 17 cm drivers and 25 mm tweeters. A signature of the range, a faceted crown surrounds the drivers to reduce diffraction and maximize linearity. The assurance of precise reproduction in hi-fi and home theater! A classic perfectedThe Elipson Prestige Facet II 14F speakers retain the DNA of their predecessor while refining every point to deliver even more grandiose performance. The thick MDF cabinet thus benefits from a reinforced structure to best eliminate internal vibrations and resonances. In addition, the geometry of these internal reinforcements has been completely redesigned. Their new design has been meticulously studied to provide better mechanical support to the speakers, particularly at frequencies where the excursion of the cones exerts significant stress on the cabinet. The front panel is made of two materials of different densities and thicknesses to avoid any unwanted interference. This same front panel is also embellished with a satin finish, more understated and elegant to facilitate the integration of the speakers into any interior. The stands also gain in modernity while offering optimal decoupling. 17 cm bass speaker The Elipson Prestige Facet II 14F floorstanding speaker retains the excellent acoustic design of its predecessor, with a 2.5-way architecture. This uses a large 17 cm diameter bass driver. It is equipped with a generously sized voice coil, which provides high power handling and guarantees maximum cooling during strong power increases. This driver is loaded with a bass-reflex with a long-profile flared vent allowing for low-frequency tuning. Thanks to this design, the Elipson Prestige Facet II 14F speaker is capable of delivering powerful and generous bass. Medium with central ogive The midrange/bass driver in the Elipson Prestige Facet II 14F is also a 17 cm diameter model. The rigid cone features a central metal cone. This improves control over the cone's movements to limit turbulence, which can cause distortion. It also absorbs unwanted vibrations and dissipates them, reducing noise and improving the accuracy of reproduction. The Elipson Prestige Facet II 14F speaker delivers very rich, well-textured, and very natural midrange.Faceted crownThese speakers are combined with a 25 mm diameter soft dome tweeter. This model ensures excellent transient response and perfect control of high frequencies down to 25 Hz. Exclusive to the Elipson Prestige Facet II speaker range, a custom-cut synthetic rubber crown surrounds each speaker to limit the baffle effect and diffraction. The response curve is thus less disturbed, more linear, for a smoother listening experience.Audiophile filterTo ensure lossless sound distribution, the Elipson Prestige Facet II 14F speaker benefits from a completely redesigned audiophile-grade passive crossover. This notably uses low-resistance inductors for a more energetic and impactful bass, while being better controlled. Polypropylene capacitors allow for greater richness in the high frequencies and metal film resistors ensure perfect separation. This redesign of the crossover allows for better channel decoupling, a smoother frequency response and a more coherent and natural soundstage. The wiring between this crossover and the loudspeakers is carried out using very high-purity 2.25 mm² oxygen-free copper conductors to ensure that every last musical information is preserved throughout the entire path. Like all speakers in the range, the Elipson Prestige Facet II 14F floorstanding speaker features a high-end dual terminal block compatible with bi-wiring and bi-amping. The contacts are silver-plated to maximize signal transmission and support banana plugs, spades, and heavy-gauge cables. The Elipson Prestige Facet II 14F floorstanding speaker is characterized by its neutrality and accuracy. Devoid of any coloration, it delivers its score without adding or subtracting anything from the original recording. Listening reveals a feeling of softness and serenity, each piece being reproduced faithfully, with control and without aggression. Designed with an audiophile approach, the Elipson Prestige Facet II 14F speaker is intended to be associated with any high-fidelity amplifier with a power less than or equal to 200 watts per channel. However, its rigorous behavior and dynamic qualities make it an excellent choice for a multi-channel home theater system in which it will effectively handle the reproduction of the front left and right channels.HighlightsAudiophile quality filter17 cm speakersSoftness and precisionHigh sensitivityVery nice finish

Elipson Prestige Facet II 14F Matte White (pair)The Elipson Prestige Facet II 14F floorstanding speaker improves on the award-winning best-selling Elipson Prestige Facet 14F by incorporating the brand's latest aesthetic and technical innovations. The cabinet benefits from structural reinforcements for increased rigidity and better driver control. The crossover has been completely redesigned for increased transparency and to exploit the full musicality of the 2.5-way architecture with dual 17 cm drivers and 25 mm tweeters. A signature of the range, a faceted crown surrounds the drivers to reduce diffraction and maximize linearity. The assurance of precise reproduction in hi-fi and home theater! A classic perfectedThe Elipson Prestige Facet II 14F speakers retain the DNA of their predecessor while refining every point to deliver even more grandiose performance. The thick MDF cabinet thus benefits from a reinforced structure to best eliminate internal vibrations and resonances. In addition, the geometry of these internal reinforcements has been completely redesigned. Their new design has been meticulously studied to provide better mechanical support to the speakers, particularly at frequencies where the excursion of the cones exerts significant stress on the cabinet. The front panel is made of two materials of different densities and thicknesses to avoid any unwanted interference. This same front panel is also embellished with a satin finish, more understated and elegant to facilitate the integration of the speakers into any interior. The stands also gain in modernity while offering optimal decoupling. 17 cm bass speaker The Elipson Prestige Facet II 14F floorstanding speaker retains the excellent acoustic design of its predecessor, with a 2.5-way architecture. This uses a large 17 cm diameter bass driver. It is equipped with a generously sized voice coil, which provides high power handling and guarantees maximum cooling during strong power increases. This driver is loaded with a bass-reflex with a long-profile flared vent allowing for low-frequency tuning. Thanks to this design, the Elipson Prestige Facet II 14F speaker is capable of delivering powerful and generous bass. Medium with central ogive The midrange/bass driver in the Elipson Prestige Facet II 14F is also a 17 cm diameter model. The rigid cone features a central metal cone. This improves control over the cone's movements to limit turbulence, which can cause distortion. It also absorbs unwanted vibrations and dissipates them, reducing noise and improving the accuracy of reproduction. The Elipson Prestige Facet II 14F speaker delivers very rich, well-textured, and very natural midrange.Faceted crownThese speakers are combined with a 25 mm diameter soft dome tweeter. This model ensures excellent transient response and perfect control of high frequencies down to 25 Hz. Exclusive to the Elipson Prestige Facet II speaker range, a custom-cut synthetic rubber crown surrounds each speaker to limit the baffle effect and diffraction. The response curve is thus less disturbed, more linear, for a smoother listening experience.Audiophile filterTo ensure lossless sound distribution, the Elipson Prestige Facet II 14F speaker benefits from a completely redesigned audiophile-grade passive crossover. This notably uses low-resistance inductors for a more energetic and impactful bass, while being better controlled. Polypropylene capacitors allow for greater richness in the high frequencies and metal film resistors ensure perfect separation. This redesign of the crossover allows for better channel decoupling, a smoother frequency response and a more coherent and natural soundstage. The wiring between this crossover and the loudspeakers is carried out using very high-purity 2.25 mm² oxygen-free copper conductors to ensure that every last musical information is preserved throughout the entire path. Like all speakers in the range, the Elipson Prestige Facet II 14F floorstanding speaker features a high-end dual terminal block compatible with bi-wiring and bi-amping. The contacts are silver-plated to maximize signal transmission and support banana plugs, spades, and heavy-gauge cables. The Elipson Prestige Facet II 14F floorstanding speaker is characterized by its neutrality and accuracy. Devoid of any coloration, it delivers its score without adding or subtracting anything from the original recording. Listening reveals a feeling of softness and serenity, each piece being reproduced faithfully, with control and without aggression. Designed with an audiophile approach, the Elipson Prestige Facet II 14F speaker is intended to be associated with any high-fidelity amplifier with a power less than or equal to 200 watts per channel. However, its rigorous behavior and dynamic qualities make it an excellent choice for a multi-channel home theater system in which it will effectively handle the reproduction of the front left and right channels.HighlightsAudiophile quality filter17 cm speakersSoftness and precisionHigh sensitivityVery nice finish

DALI Rubikore 8 – The Ultimate Expression of Power and Precision in Floorstanding LoudspeakersAs the flagship model of the Rubikore series, the DALI Rubikore 8 stands at the pinnacle of high-end audio performance. Designed for those who demand nothing less than breathtaking realism, it delivers immense scale, exquisite detail, and a powerful yet refined presentation that fills even the largest spaces with lifelike sound. From the deepest bass lines to the most delicate high frequencies, the Rubikore 8 embodies DALI’s uncompromising pursuit of audio excellence.Perfect for both high-fidelity stereo listening and as front channels in a state-of-the-art home theater, these speakers combine cutting-edge driver technology, luxurious craftsmanship, and Danish design to create an unforgettable listening experience.Key FeaturesFlagship Performance – Largest and most powerful model in the Rubikore lineup, built to deliver full-range sound with uncompromising authority.Dual 8-Inch Woofers – Deep, dynamic, and tightly controlled bass that anchors music and movies with visceral impact.Dedicated Midrange Driver – Ensures vocal clarity, tonal accuracy, and seamless integration across frequencies.Hybrid Tweeter Module – Combines a soft-dome and ribbon tweeter for crystalline highs, extended frequency response, and an airy, open presentation.Expansive Soundstage – Wide dispersion and precise imaging create a natural, three-dimensional listening experience.Premium Cabinet Design – Rigid, resonance-controlled enclosures with refined wood finishes to complement any listening space.Advanced Crossover Network – Engineered for phase coherence, smooth transitions, and optimal driver performance.Bi-Wire/Bi-Amp Terminals – Flexible connection options for audiophiles seeking maximum system synergy.Room-Filling Presence – Ideal for large living spaces, dedicated listening rooms, or high-end home theater setups.Luxurious Craftsmanship – A statement piece in both sound and aesthetics, built to last and to impress.

DALI Rubikore 8 – The Ultimate Expression of Power and Precision in Floorstanding LoudspeakersAs the flagship model of the Rubikore series, the DALI Rubikore 8 stands at the pinnacle of high-end audio performance. Designed for those who demand nothing less than breathtaking realism, it delivers immense scale, exquisite detail, and a powerful yet refined presentation that fills even the largest spaces with lifelike sound. From the deepest bass lines to the most delicate high frequencies, the Rubikore 8 embodies DALI’s uncompromising pursuit of audio excellence.Perfect for both high-fidelity stereo listening and as front channels in a state-of-the-art home theater, these speakers combine cutting-edge driver technology, luxurious craftsmanship, and Danish design to create an unforgettable listening experience.Key FeaturesFlagship Performance – Largest and most powerful model in the Rubikore lineup, built to deliver full-range sound with uncompromising authority.Dual 8-Inch Woofers – Deep, dynamic, and tightly controlled bass that anchors music and movies with visceral impact.Dedicated Midrange Driver – Ensures vocal clarity, tonal accuracy, and seamless integration across frequencies.Hybrid Tweeter Module – Combines a soft-dome and ribbon tweeter for crystalline highs, extended frequency response, and an airy, open presentation.Expansive Soundstage – Wide dispersion and precise imaging create a natural, three-dimensional listening experience.Premium Cabinet Design – Rigid, resonance-controlled enclosures with refined wood finishes to complement any listening space.Advanced Crossover Network – Engineered for phase coherence, smooth transitions, and optimal driver performance.Bi-Wire/Bi-Amp Terminals – Flexible connection options for audiophiles seeking maximum system synergy.Room-Filling Presence – Ideal for large living spaces, dedicated listening rooms, or high-end home theater setups.Luxurious Craftsmanship – A statement piece in both sound and aesthetics, built to last and to impress.

DALI Rubikore 8 – The Ultimate Expression of Power and Precision in Floorstanding LoudspeakersAs the flagship model of the Rubikore series, the DALI Rubikore 8 stands at the pinnacle of high-end audio performance. Designed for those who demand nothing less than breathtaking realism, it delivers immense scale, exquisite detail, and a powerful yet refined presentation that fills even the largest spaces with lifelike sound. From the deepest bass lines to the most delicate high frequencies, the Rubikore 8 embodies DALI’s uncompromising pursuit of audio excellence.Perfect for both high-fidelity stereo listening and as front channels in a state-of-the-art home theater, these speakers combine cutting-edge driver technology, luxurious craftsmanship, and Danish design to create an unforgettable listening experience.Key FeaturesFlagship Performance – Largest and most powerful model in the Rubikore lineup, built to deliver full-range sound with uncompromising authority.Dual 8-Inch Woofers – Deep, dynamic, and tightly controlled bass that anchors music and movies with visceral impact.Dedicated Midrange Driver – Ensures vocal clarity, tonal accuracy, and seamless integration across frequencies.Hybrid Tweeter Module – Combines a soft-dome and ribbon tweeter for crystalline highs, extended frequency response, and an airy, open presentation.Expansive Soundstage – Wide dispersion and precise imaging create a natural, three-dimensional listening experience.Premium Cabinet Design – Rigid, resonance-controlled enclosures with refined wood finishes to complement any listening space.Advanced Crossover Network – Engineered for phase coherence, smooth transitions, and optimal driver performance.Bi-Wire/Bi-Amp Terminals – Flexible connection options for audiophiles seeking maximum system synergy.Room-Filling Presence – Ideal for large living spaces, dedicated listening rooms, or high-end home theater setups.Luxurious Craftsmanship – A statement piece in both sound and aesthetics, built to last and to impress.

DALI Rubikore 8 – The Ultimate Expression of Power and Precision in Floorstanding LoudspeakersAs the flagship model of the Rubikore series, the DALI Rubikore 8 stands at the pinnacle of high-end audio performance. Designed for those who demand nothing less than breathtaking realism, it delivers immense scale, exquisite detail, and a powerful yet refined presentation that fills even the largest spaces with lifelike sound. From the deepest bass lines to the most delicate high frequencies, the Rubikore 8 embodies DALI’s uncompromising pursuit of audio excellence.Perfect for both high-fidelity stereo listening and as front channels in a state-of-the-art home theater, these speakers combine cutting-edge driver technology, luxurious craftsmanship, and Danish design to create an unforgettable listening experience.Key FeaturesFlagship Performance – Largest and most powerful model in the Rubikore lineup, built to deliver full-range sound with uncompromising authority.Dual 8-Inch Woofers – Deep, dynamic, and tightly controlled bass that anchors music and movies with visceral impact.Dedicated Midrange Driver – Ensures vocal clarity, tonal accuracy, and seamless integration across frequencies.Hybrid Tweeter Module – Combines a soft-dome and ribbon tweeter for crystalline highs, extended frequency response, and an airy, open presentation.Expansive Soundstage – Wide dispersion and precise imaging create a natural, three-dimensional listening experience.Premium Cabinet Design – Rigid, resonance-controlled enclosures with refined wood finishes to complement any listening space.Advanced Crossover Network – Engineered for phase coherence, smooth transitions, and optimal driver performance.Bi-Wire/Bi-Amp Terminals – Flexible connection options for audiophiles seeking maximum system synergy.Room-Filling Presence – Ideal for large living spaces, dedicated listening rooms, or high-end home theater setups.Luxurious Craftsmanship – A statement piece in both sound and aesthetics, built to last and to impress.

Designed for music lovers and home theater enthusiasts, the Horus 11F Active BT is a 2.5-way floorstanding speaker that integrates all the elements of a high-fidelity system into an elegant vertical format.With its two 130 mm mid-bass drivers made of cellulose pulp coated with fiberglass, it delivers deep bass and expressive midrange. The 25 mm silk dome tweeter, powered by a neodymium magnet, ensures smooth and refined highs. The entire system is powered by a built-in stereo amplifier of 2 × 50 W RMS, guaranteeing excellent dynamic control and balanced reproduction.Its extensive connectivity opens the door to all uses:Phono MM input: connect a turntable directly, no external preamp needed.AUX input (500 mV): ideal for analog sources like CD players or portable players.USB Audio input (24-bit / 96 kHz): connect a computer for simple, direct Hi-Res playback.Coaxial and Optical inputs (24-bit / 192 kHz): for digital players, network streamers, or TVs.TV/ARC input: simplified connection with compatible TVs, volume controllable via TV remote.Bluetooth 5.0 APTX HD: stream your music wirelessly in near-CD quality from any compatible device.Subwoofer output (150 Hz / 12 dB/octave): allows adding a subwoofer to enhance bass impact, especially in home theater setups.Compact for a floorstanding speaker, finely finished, and delivered with all necessary accessories (power cable, speaker cable, remote control), the Horus 11F Active BT offers a powerful, elegant, and perfectly integrated solution.

Designed for music lovers and home theater enthusiasts, the Horus 11F Active BT is a 2.5-way floorstanding speaker that integrates all the elements of a high-fidelity system into an elegant vertical format.With its two 130 mm mid-bass drivers made of cellulose pulp coated with fiberglass, it delivers deep bass and expressive midrange. The 25 mm silk dome tweeter, powered by a neodymium magnet, ensures smooth and refined highs. The entire system is powered by a built-in stereo amplifier of 2 × 50 W RMS, guaranteeing excellent dynamic control and balanced reproduction.Its extensive connectivity opens the door to all uses:Phono MM input: connect a turntable directly, no external preamp needed.AUX input (500 mV): ideal for analog sources like CD players or portable players.USB Audio input (24-bit / 96 kHz): connect a computer for simple, direct Hi-Res playback.Coaxial and Optical inputs (24-bit / 192 kHz): for digital players, network streamers, or TVs.TV/ARC input: simplified connection with compatible TVs, volume controllable via TV remote.Bluetooth 5.0 APTX HD: stream your music wirelessly in near-CD quality from any compatible device.Subwoofer output (150 Hz / 12 dB/octave): allows adding a subwoofer to enhance bass impact, especially in home theater setups.Compact for a floorstanding speaker, finely finished, and delivered with all necessary accessories (power cable, speaker cable, remote control), the Horus 11F Active BT offers a powerful, elegant, and perfectly integrated solution.

Designed for music lovers and home theater enthusiasts, the Horus 11F Active BT is a 2.5-way floorstanding speaker that integrates all the elements of a high-fidelity system into an elegant vertical format.With its two 130 mm mid-bass drivers made of cellulose pulp coated with fiberglass, it delivers deep bass and expressive midrange. The 25 mm silk dome tweeter, powered by a neodymium magnet, ensures smooth and refined highs. The entire system is powered by a built-in stereo amplifier of 2 × 50 W RMS, guaranteeing excellent dynamic control and balanced reproduction.Its extensive connectivity opens the door to all uses:Phono MM input: connect a turntable directly, no external preamp needed.AUX input (500 mV): ideal for analog sources like CD players or portable players.USB Audio input (24-bit / 96 kHz): connect a computer for simple, direct Hi-Res playback.Coaxial and Optical inputs (24-bit / 192 kHz): for digital players, network streamers, or TVs.TV/ARC input: simplified connection with compatible TVs, volume controllable via TV remote.Bluetooth 5.0 APTX HD: stream your music wirelessly in near-CD quality from any compatible device.Subwoofer output (150 Hz / 12 dB/octave): allows adding a subwoofer to enhance bass impact, especially in home theater setups.Compact for a floorstanding speaker, finely finished, and delivered with all necessary accessories (power cable, speaker cable, remote control), the Horus 11F Active BT offers a powerful, elegant, and perfectly integrated solution.

With its outstanding technological heritage and unique style, Grande Utopia is an exceptional high-fidelity loudspeaker. It is Focal's most accomplished concept and one of the best loudspeakers in the world. At 2 metres high, it delivers sound of unrivalled finesse and precision.

With its outstanding technological heritage and unique style, Grande Utopia is an exceptional high-fidelity loudspeaker. It is Focal's most accomplished concept and one of the best loudspeakers in the world. At 2 metres high, it delivers sound of unrivalled finesse and precision.

With its outstanding technological heritage and unique style, Grande Utopia is an exceptional high-fidelity loudspeaker. It is Focal's most accomplished concept and one of the best loudspeakers in the world. At 2 metres high, it delivers sound of unrivalled finesse and precision.

With its outstanding technological heritage and unique style, Grande Utopia is an exceptional high-fidelity loudspeaker. It is Focal's most accomplished concept and one of the best loudspeakers in the world. At 2 metres high, it delivers sound of unrivalled finesse and precision.

With a big bass driver, twin ABRs and Uni-Q driver array the Q950 floorstander can deliver music and cinema in full effect. Pairing KEF's signature Uni-Q midrange and treble driver with a 200mm (8 inches) long-throw bass driver and two matching ABRs brings high resolution sound with extraordinary depth and clarity.

Diva Mezza Utopia redefines the standards of high-fidelity listening: an active, wireless, and connected speaker, it combines audiophile excellence with ease of use in a single solution. With its four innovative and powerful 20 cm woofers, its cutting-edge technologies, and its sculptural design, it propels music listening at home into a new dimension. Music, films, vinyl records, video games...: listen without constraints, feel without limits.

The LS1c is the flagship of our LS1 active loudspeaker series. It is named after the revolutionary TPCD Carbon Composite tweeter that we developed in cooperation with driver manufacturer Seas. Even more important is that we rebuilt all elements of the LS1 design from the ground up: New electronics with latest generation amplifiers, New audio DSP code, New computer aided calibration method, New firmware New PC/Mac software that controls the entire system. To pick just one example, with the knowledge we gained from developing the MU1 and MU2 FPGA Pure Nyquist filters, we were able to dramatically improve the crossover phase correction filters of the LS1c’s DSP. The LS1c offers an incredible level of integration over the full frequency band The loudspeaker has never sounded so much ‘as one’. Its rendering of the stereo image appears more tactile than ever, its capability for microdynamics exposes unheard details and its extraordinary phase coherency reveals the subtlest rhythmic structures. At the same time the natural, non-fatiguing sound of the LS1c invites one to long listening sessions. “All elements of the LS1 design were rebuilt from the ground up.” At the low end of the frequency spectrum,The elegant Digital Motional Feedback SB1 subwoofer offers unparalleled bass. Our unique motion feedback technology lowers the distortion by 30 dB and places the resonance frequency below 20 Hz. Bass has never sounded so detailed and controlled. A natural companion for the LS1c is the MU1 music player that allows control of all loudspeaker parameters. But an LS1c is equally happy when combined with the LS1r controller and the LS1i USB interface. The cabinet can be ordered in a stylish ‘Hi-Macs’ synthetic stone finish, or in our traditional bamboo veneer or lacquer look.

The LS1c is the flagship of our LS1 active loudspeaker series. It is named after the revolutionary TPCD Carbon Composite tweeter that we developed in cooperation with driver manufacturer Seas. Even more important is that we rebuilt all elements of the LS1 design from the ground up: New electronics with latest generation amplifiers, New audio DSP code, New computer aided calibration method, New firmware New PC/Mac software that controls the entire system. To pick just one example, with the knowledge we gained from developing the MU1 and MU2 FPGA Pure Nyquist filters, we were able to dramatically improve the crossover phase correction filters of the LS1c’s DSP. The LS1c offers an incredible level of integration over the full frequency band The loudspeaker has never sounded so much ‘as one’. Its rendering of the stereo image appears more tactile than ever, its capability for microdynamics exposes unheard details and its extraordinary phase coherency reveals the subtlest rhythmic structures. At the same time the natural, non-fatiguing sound of the LS1c invites one to long listening sessions. “All elements of the LS1 design were rebuilt from the ground up.” At the low end of the frequency spectrum,The elegant Digital Motional Feedback SB1 subwoofer offers unparalleled bass. Our unique motion feedback technology lowers the distortion by 30 dB and places the resonance frequency below 20 Hz. Bass has never sounded so detailed and controlled. A natural companion for the LS1c is the MU1 music player that allows control of all loudspeaker parameters. But an LS1c is equally happy when combined with the LS1r controller and the LS1i USB interface. The cabinet can be ordered in a stylish ‘Hi-Macs’ synthetic stone finish, or in our traditional bamboo veneer or lacquer look.

The Grimm Audio  LS1 is the most technologically advanced loudspeaker system ever!A good monitor combines a high degree of accuracy with untrammeled musicality. There aren't many of those around - common wisdom has it that you can have one or the other but never both. The LS1 is the first monitor to prove conventional wisdom wrong.By integrating top quality digital signal processing, converters and amplifiers in one of the speakers' legs, Grimm Audio was able to apply technical strategies no one had used before. As a consequence, the LS1 is not just a loudspeaker, but a complete audio system that only needs an analog or digital line source to perform.“This speaker is explicitly for those who want the most neutral and transparent sound reproduction, no corners were cut.”True accuracy is about getting all the bits in the right place: not losing anything, not adding anything either. The LS1 offers this accuracy, reproducing a truly musical recording accurately, with all beauty intact. At the same time, the LS1 will also reproduce any imperfection, giving you all the information you need to get it right. These qualities make the LS1 an ideal monitor for both mastering and mixing.Don't let the stylish industrial design and finish fool you: the shape of this loudspeaker is the outcome of thorough psychoacoustical and acoustical research. Its small sealed box (14 litres) is much wider than it is deep, is designed to provide an effective baffle down to around 250 Hz.That way, the LS1 achieves a reasonable constant directivity in 2π space above 250 Hz (with a natural and progressive “narrowing” of its high frequency off-axis response) minimizing many of the listening room’s detrimental effects (Psychoacoustics tells us that below about 300 Hz the ear will no longer clearly discern direct sound, first reflections or reverberant sound), while below 250 Hz the speaker gradually transitions to omnidirectional.“The wide baffle halves the volume into which the sound is radiated, thereby halving room problems as well. The cylindrical sides eliminate the classical "big box" colouration that is caused by edge diffractions.”The LS1 is suspended between two half cylinders that combat diffraction and function as an integral two-legged floor stand. An 8" magnesium woofer and a 1" dome tweeter divide the work between them. Smart use of DSP linearizes the frequency response and allows for a controlled bass response down to 35 Hz.Housed in one of the two legs are a 48/76-bit DSP, digital I/O, AD/DA converters, the same clock circuit as Grimm’s own CC1 master clock and the drive electronics, encompassing two 180W Class D power amplifiers of the groundbreaking Hypex NCore type.The concept of the LS1 draws maximum benefit from intelligent application of DSP technology. An IIR crossover imposes exact LR4 acoustic slopes crossing at 1550 Hz, and the phase is subsequently corrected using an idealised inverted all-pass filter, resulting in a maximally linear phase response without any pre-echo’s. This removes the “digital loudspeaker sound signature” typical of the more ubiquitous impulse inverted FIR designs.“The waveguide tweeter, the perfectly pistonic woofer (both by the world famous Seas company) and the very low crossover frequency insure that the sound is radiated in an unusually wide and even manner.Grimm LS1’s carefully controlled acoustics form the basis for the active DSP based filter which welds the driver responses together into the most even-handed frequency response and the fastest impulse response you'll ever hear.”The LS1 is also a very practical loudspeaker. Its digital input allows them to be connected without further ado to network players like Squeezebox or Sonos, or to a Mac or PC using the included USB converter. The pictures on the right hand show a few options.Despite their compact size, these floor standing speakers are clearly intended as main monitors in mastering studios and mixing rooms that have space to put free-standing speakers. The DSP controlled analog subwoofer output allows for easy integration with stereo subwoofers, for those that need high SPL performance below 40 Hz.By selecting Grimm’s own LS1s subwoofers, perfect integration with the main system is obtained, effectively turning the LS1 into a threeway system.More info can be found at the LS1 remote and the LS1s subwoofer page.For Measurement Charts (both in-house and third party – German Audio Magazine’s May 2013 issue) and photos of the LS1 please refer to the pictures section of this page.Features:Unidirectional down to 250 HzDSP controlled frequency curveWell-behaved off-axis responseDigital and analog audio inputsFiltered analog subwoofer outputFail safe due to excursion and thermal limiterMidi control of volume and settingsSuper low distortion NCore class D power ampsAudiophile quality Seas driversRemote control optionDifferent color scheme options Specifications:·         Frequency response: 55Hz-30kHz +/-0.5dB. 45Hz-40kHz -3dB(Low corner is user-settable between 35 Hz and 100 Hz, Q=0.7 or 0.5)With the addition of the LS1s Subwoofers, the LS1 can perform almost down to the infrasonic range·         Deviation from minimum phase +/-2°·         Amplifier power: 2x180W·         Max SPL: 109dB/1m·         SNR: 114dB (unweighted)·         Crossover function: 1.55 kHz LR4, sum corrected to minimum phase.·         Latency: 2ms·         Internal volume: 14 litres·         Height: 1150mm, 1450mm - available on demand.·         Width, depth: 520mm X 160mmFurther Resources:·         Download the LS1 PC remote software

The SB1 with ‘DMF’ is a technological marvel. By applying ‘Digital Motional Feedback’, a control technology from the renowned Dutch high-tech industry, it became possible to achieve exceptionally low levels of distortion and full dynamic control. With an SB1 added for the bass frequencies, the LS1 system offers low distortion over the full audio band and redefines the term ‘transparency’. This is bass control like you’ve never experienced before.“Digital Motional Feedback offers bass control like you’ve never experienced before.”At frequencies below 100 Hz loudspeaker drivers need to move a vast amount of air and therefore have high excursion levels, while also the fundamental resonance – which is present in any loudspeaker – induces unwanted delayed effects. The result is that all conventional loudspeakers exhibit a rising distortion in the bass region with additional “thickening” of the bass by the resonance.In electronics, feedback is used to minimise distortion. To apply feedback in electro-mechanical systems like an active loudspeaker, an acceleration sensor needs to be mounted on the cone to monitor its motions. This so called “Motional Feedback” technology has been presented a few times before in history but the precision and control as found in the Grimm Audio SB1 is unique. By adding smart digital processing and current drive, the low distortion of the already high-performance aluminium woofer is further reduced by as much as 30 dB, solving all problems that are related to low frequency resonances and distortion.The SB1 sub is a perfect partner for the LS1v2 and an excellent match for the LS1be. It is even a smart extension for the LS1a. A switch facilitates use of the SB1 with third party systems, so the virtues of Digital Motional Feedback can be enjoyed by many.

LS1be upgrade – brings LS1 versions to LS1be levelThe Grimm Audio LS1 is the most technologically advanced loudspeaker system ever!A good monitor combines a high degree of accuracy with untrammeled musicality. There aren't many of those around - common wisdom has it that you can have one or the other but never both. The LS1 is the first monitor to prove conventional wisdom wrong.By integrating top quality digital signal processing, converters and amplifiers in one of the speakers' legs, Grimm Audio was able to apply technical strategies no one had used before. As a consequence, the LS1 is not just a loudspeaker, but a complete audio system that only needs an analog or digital line source to perform.“This speaker is explicitly for those who want the most neutral and transparent sound reproduction, no corners were cut.”True accuracy is about getting all the bits in the right place: not losing anything, not adding anything either. The LS1 offers this accuracy, reproducing a truly musical recording accurately, with all beauty intact. At the same time, the LS1 will also reproduce any imperfection, giving you all the information you need to get it right. These qualities make the LS1 an ideal monitor for both mastering and mixing.Don't let the stylish industrial design and finish fool you: the shape of this loudspeaker is the outcome of thorough psychoacoustical and acoustical research. Its small sealed box (14 litres) is much wider than it is deep, is designed to provide an effective baffle down to around 250 Hz.That way, the LS1 achieves a reasonable constant directivity in 2π space above 250 Hz (with a natural and progressive “narrowing” of its high frequency off-axis response) minimizing many of the listening room’s detrimental effects (Psychoacoustics tells us that below about 300 Hz the ear will no longer clearly discern direct sound, first reflections or reverberant sound), while below 250 Hz the speaker gradually transitions to omnidirectional.“The wide baffle halves the volume into which the sound is radiated, thereby halving room problems as well. The cylindrical sides eliminate the classical "big box" colouration that is caused by edge diffractions.”The LS1 is suspended between two half cylinders that combat diffraction and function as an integral two-legged floor stand. An 8" magnesium woofer and a 1" dome tweeter divide the work between them. Smart use of DSP linearizes the frequency response and allows for a controlled bass response down to 35 Hz.Housed in one of the two legs are a 48/76-bit DSP, digital I/O, AD/DA converters, the same clock circuit as Grimm’s own CC1 master clock and the drive electronics, encompassing two 180W Class D power amplifiers of the groundbreaking Hypex NCore type.The concept of the LS1 draws maximum benefit from intelligent application of DSP technology. An IIR crossover imposes exact LR4 acoustic slopes crossing at 1550 Hz, and the phase is subsequently corrected using an idealised inverted all-pass filter, resulting in a maximally linear phase response without any pre-echo’s. This removes the “digital loudspeaker sound signature” typical of the more ubiquitous impulse inverted FIR designs.“The waveguide tweeter, the perfectly pistonic woofer (both by the world famous Seas company) and the very low crossover frequency insure that the sound is radiated in an unusually wide and even manner.Grimm LS1’s carefully controlled acoustics form the basis for the active DSP based filter which welds the driver responses together into the most even-handed frequency response and the fastest impulse response you'll ever hear.”The LS1 is also a very practical loudspeaker. Its digital input allows them to be connected without further ado to network players like Squeezebox or Sonos, or to a Mac or PC using the included USB converter. The pictures on the right hand show a few options.Despite their compact size, these floor standing speakers are clearly intended as main monitors in mastering studios and mixing rooms that have space to put free-standing speakers. The DSP controlled analog subwoofer output allows for easy integration with stereo subwoofers, for those that need high SPL performance below 40 Hz.By selecting Grimm’s own LS1s subwoofers, perfect integration with the main system is obtained, effectively turning the LS1 into a threeway system.More info can be found at the LS1 remote and the LS1s subwoofer page.For Measurement Charts (both in-house and third party – German Audio Magazine’s May 2013 issue) and photos of the LS1 please refer to the pictures section of this page.Features:Unidirectional down to 250 HzDSP controlled frequency curveWell-behaved off-axis responseDigital and analog audio inputsFiltered analog subwoofer outputFail safe due to excursion and thermal limiterMidi control of volume and settingsSuper low distortion NCore class D power ampsAudiophile quality Seas driversRemote control optionDifferent color scheme options Specifications:·        Frequency response: 55Hz-30kHz +/-0.5dB. 45Hz-40kHz -3dB(Low corner is user-settable between 35 Hz and 100 Hz, Q=0.7 or 0.5)With the addition of the LS1s Subwoofers, the LS1 can perform almost down to the infrasonic range·        Deviation from minimum phase +/-2°·        Amplifier power: 2x180W·        Max SPL: 109dB/1m·        SNR: 114dB (unweighted)·        Crossover function: 1.55 kHz LR4, sum corrected to minimum phase.·        Latency: 2ms·        Internal volume: 14 litres·        Height: 1150mm, 1450mm - available on demand.·        Width, depth: 520mm X 160mmFurther Resources:·        Download the LS1 PC remote software

LS1be upgrade – brings LS1 versions to LS1be levelThe Grimm Audio LS1 is the most technologically advanced loudspeaker system ever!A good monitor combines a high degree of accuracy with untrammeled musicality. There aren't many of those around - common wisdom has it that you can have one or the other but never both. The LS1 is the first monitor to prove conventional wisdom wrong.By integrating top quality digital signal processing, converters and amplifiers in one of the speakers' legs, Grimm Audio was able to apply technical strategies no one had used before. As a consequence, the LS1 is not just a loudspeaker, but a complete audio system that only needs an analog or digital line source to perform.“This speaker is explicitly for those who want the most neutral and transparent sound reproduction, no corners were cut.”True accuracy is about getting all the bits in the right place: not losing anything, not adding anything either. The LS1 offers this accuracy, reproducing a truly musical recording accurately, with all beauty intact. At the same time, the LS1 will also reproduce any imperfection, giving you all the information you need to get it right. These qualities make the LS1 an ideal monitor for both mastering and mixing.Don't let the stylish industrial design and finish fool you: the shape of this loudspeaker is the outcome of thorough psychoacoustical and acoustical research. Its small sealed box (14 litres) is much wider than it is deep, is designed to provide an effective baffle down to around 250 Hz.That way, the LS1 achieves a reasonable constant directivity in 2π space above 250 Hz (with a natural and progressive “narrowing” of its high frequency off-axis response) minimizing many of the listening room’s detrimental effects (Psychoacoustics tells us that below about 300 Hz the ear will no longer clearly discern direct sound, first reflections or reverberant sound), while below 250 Hz the speaker gradually transitions to omnidirectional.“The wide baffle halves the volume into which the sound is radiated, thereby halving room problems as well. The cylindrical sides eliminate the classical "big box" colouration that is caused by edge diffractions.”The LS1 is suspended between two half cylinders that combat diffraction and function as an integral two-legged floor stand. An 8" magnesium woofer and a 1" dome tweeter divide the work between them. Smart use of DSP linearizes the frequency response and allows for a controlled bass response down to 35 Hz.Housed in one of the two legs are a 48/76-bit DSP, digital I/O, AD/DA converters, the same clock circuit as Grimm’s own CC1 master clock and the drive electronics, encompassing two 180W Class D power amplifiers of the groundbreaking Hypex NCore type.The concept of the LS1 draws maximum benefit from intelligent application of DSP technology. An IIR crossover imposes exact LR4 acoustic slopes crossing at 1550 Hz, and the phase is subsequently corrected using an idealised inverted all-pass filter, resulting in a maximally linear phase response without any pre-echo’s. This removes the “digital loudspeaker sound signature” typical of the more ubiquitous impulse inverted FIR designs.“The waveguide tweeter, the perfectly pistonic woofer (both by the world famous Seas company) and the very low crossover frequency insure that the sound is radiated in an unusually wide and even manner.Grimm LS1’s carefully controlled acoustics form the basis for the active DSP based filter which welds the driver responses together into the most even-handed frequency response and the fastest impulse response you'll ever hear.”The LS1 is also a very practical loudspeaker. Its digital input allows them to be connected without further ado to network players like Squeezebox or Sonos, or to a Mac or PC using the included USB converter. The pictures on the right hand show a few options.Despite their compact size, these floor standing speakers are clearly intended as main monitors in mastering studios and mixing rooms that have space to put free-standing speakers. The DSP controlled analog subwoofer output allows for easy integration with stereo subwoofers, for those that need high SPL performance below 40 Hz.By selecting Grimm’s own LS1s subwoofers, perfect integration with the main system is obtained, effectively turning the LS1 into a threeway system.More info can be found at the LS1 remote and the LS1s subwoofer page.For Measurement Charts (both in-house and third party – German Audio Magazine’s May 2013 issue) and photos of the LS1 please refer to the pictures section of this page.Features:Unidirectional down to 250 HzDSP controlled frequency curveWell-behaved off-axis responseDigital and analog audio inputsFiltered analog subwoofer outputFail safe due to excursion and thermal limiterMidi control of volume and settingsSuper low distortion NCore class D power ampsAudiophile quality Seas driversRemote control optionDifferent color scheme options Specifications:·        Frequency response: 55Hz-30kHz +/-0.5dB. 45Hz-40kHz -3dB(Low corner is user-settable between 35 Hz and 100 Hz, Q=0.7 or 0.5)With the addition of the LS1s Subwoofers, the LS1 can perform almost down to the infrasonic range·        Deviation from minimum phase +/-2°·        Amplifier power: 2x180W·        Max SPL: 109dB/1m·        SNR: 114dB (unweighted)·        Crossover function: 1.55 kHz LR4, sum corrected to minimum phase.·        Latency: 2ms·        Internal volume: 14 litres·        Height: 1150mm, 1450mm - available on demand.·        Width, depth: 520mm X 160mmFurther Resources:·        Download the LS1 PC remote software

DIVA UTOPIA combines the best of Focal Acoustics and Naim Electronics. This active bass-reflex speaker offers high-quality sound, the latest wireless technologies, and extensive connectivity for exceptional listening experiences. Whether it's music, movies, or video games, it revolutionises home listening and frees you from all constraints. With DIVA UTOPIA and its unique design, simply plug in, connect, and enjoy the pure sound of Focal.

DIVA UTOPIA combines the best of Focal Acoustics and Naim Electronics. This active bass-reflex speaker offers high-quality sound, the latest wireless technologies, and extensive connectivity for exceptional listening experiences. Whether it's music, movies, or video games, it revolutionises home listening and frees you from all constraints. With DIVA UTOPIA and its unique design, simply plug in, connect, and enjoy the pure sound of Focal.

DIVA UTOPIA combines the best of Focal Acoustics and Naim Electronics. This active bass-reflex speaker offers high-quality sound, the latest wireless technologies, and extensive connectivity for exceptional listening experiences. Whether it's music, movies, or video games, it revolutionises home listening and frees you from all constraints. With DIVA UTOPIA and its unique design, simply plug in, connect, and enjoy the pure sound of Focal.

JBL 4312G12-inch (300mm) 3-way Studio Monitor Bookshelf LoudspeakerThe JBL 4312G is a 3-way, high-performance compact studio monitor in the iconic JBL configuration dating back to 1968. The latest in line of top-notch bookshelf speakers inspired by the legendary Model 4310 Control Monitor, the 4312G delivers thundering bass, with dynamic and clear highs for a thoroughly enjoyable audio experience.1-inch Magnesium-Aluminum alloy dome tweeter mated to acoustic lens waveguide.12-inch (300mm) cast-frame, white pure-pulp cone woofer with front-firing tuned port.5.25-inch (130mm) polymer-coated pure-pulp cone midrange driver.

JBL 434912-inch (300mm) 2-way Studio Monitor LoudspeakerDesigned and engineered in JBL’s world-famous acoustic engineering facility in Northridge, California, the 4349 Studio Monitor is a showcase of patented JBL acoustics technologies. This monitor loudspeaker features a 2-way design with patented High-Definition Imaging (HDI™) horn technology, the patented D2415K dual 1.5-inch (38mm) compression driver, and a 12-inch (300mm) cast-frame, Pure-pulp cone woofer for powerful dynamics and incredibly accurate sound reproduction.Patented D2415K 1.5-inch (38mm) dual diaphragm compression driver mated to patented High-Definition Imaging (HDI™) geometry horn.12-inch (300mm) pure-pulp cone woofer in bass-reflex design with dual front-firing tuned ports.Choice of Satin Walnut or Black Walnut furniture-grade satin wood veneers.

JBL 436715-inch (380mm) 2-way Floorstanding Studio Monitor LoudspeakerFor many years, iconic JBL loudspeakers have perfected the definition of luxury audio. The 4367 is no exception. The 2-way loudspeaker offers a cast-frame 15-inch woofer (2216Nd-1) with a powerful, patented Differential Drive® dual 3-inch voice coil and neodymium motor structure for outstanding behavior in the low to mid frequency range. Upper-mid and high frequencies are reproduced by a patented D2430K 3-inch dual diaphragm, dual voice coil compression driver with dual neodymium motor structures and JBL's patented High-Definition Imaging (HDI™) waveguide horn.Patented D2430K 3-inch (75mm) dual diaphragm compression driver mated to patented High-Definition Imaging (HDI™) geometry horn.Patented 15-inch (380mm) Dual Differential Drive® woofer in bass-reflex design with dual front-firing tuned ports.Choice of Satin Walnut or Black Walnut furniture-grade satin wood veneers.

Wilson Raptor 9 Max, 3-way, passive Hi-Fi speaker recommended for amps 50-250 Watts, 4-8 Ohm impedance, max SPL 112dB and 92dB sensitivity. they are intended for use in larger rooms, where they will show their full acoustic potential and also for home cinema use.The reinforced structure of Raptor 9 Max enclosures constructed from thick 18 mm MDF boards, covered with a durable and aesthetic layer of modern vinyl with a structure deceptively similar to the surface of wood finished with a slight gloss on the entire surface of the sidewalls, top, and rear. The front-mounted Bass-Reflex port not only allows for much higher efficiency in the low-frequency range but also gives the possibility of placing the speakers much closer to the walls.The enclosure houses two 8/" (20.3 cm) woofers (20.3 cm) each, a 6.5/" (16.5 cm) midrange driver, and a 1/" (2.5 cm) tweeter with a textile dome. The drivers use tightly compressed cellulose membranes of the highest quality and high rigidity, as in the rest of the Raptor Series. The crossover ensures the consistency of sound of all elements in this construction.

Wilson Raptor 7, 2-way, passive Hi-Fi speaker recommended for amps 50-180 Watts, 4-8 Ohm impedance, max SPL 110dB and 90dB sensitivity. Τhey are intended for use in larger rooms, where they will show their full acoustic potential and also for home cinema use.High quality housing covered with aesthetic layer of modern vinyl, with a wood-like surface finished with a slight gloss on the entire surface of the side, top and back walls. The material provides long-lasting resistance to colour change and unwanted effects of light, which is especially important for a white finish, when the columns are placed in very sunny rooms.The crossover developed for this design has been integrated to ensure that all the elements in this design are consistent in sound. It includes two low-midrange drivers 6 1/2/" each, and a 2.5 cm tweeter with a fabric dome. They surprise you with their naturalness, pleasant sound with all the elementary characteristics of good audiophile hi-fi.

Wilson Raptor 7, 2-way, passive Hi-Fi speaker recommended for amps 50-180 Watts, 4-8 Ohm impedance, max SPL 110dB and 90dB sensitivity. Τhey are intended for use in larger rooms, where they will show their full acoustic potential and also for home cinema use.High quality housing covered with aesthetic layer of modern vinyl, with a wood-like surface finished with a slight gloss on the entire surface of the side, top and back walls. The material provides long-lasting resistance to colour change and unwanted effects of light, which is especially important for a white finish, when the columns are placed in very sunny rooms.The crossover developed for this design has been integrated to ensure that all the elements in this design are consistent in sound. It includes two low-midrange drivers 6 1/2/" each, and a 2.5 cm tweeter with a fabric dome. They surprise you with their naturalness, pleasant sound with all the elementary characteristics of good audiophile hi-fi.

Wilson Raptor 5, 2-way, passive Hi-Fi speaker recommended for amps 40-150 Watts, 4-8 Ohm impedance, max SPL 108dB and 88dB sensitivity. It is part of the Raptor series and can be used as part of a home theater system or as standalone stereo speaker.A 1/" tweeter with a textile dome and two 5/" low-midrange drivers with cellulose diaphragms are responsible for sound reproduction. The front of the tweeter is surrounded by a short horn designed to improve the efficiency of the tweeters operating conditions.Sound: balanced and dynamic, with rich bass response, powerful vocals, smooth treble and an optimal dose of detail.