Rega Tonearm Bolt Inox

Rega 3-Point VTA Spacer Inox

Height adjustment for three-point armsThe Rega 3-Point VTA Spacer Inox is Rega’s 2 mm stainless steel spacer for three-point tonearms. Made in England, it gives a rigid, stable base under the arm when extra height is needed for deeper-bodied cartridges.When it is neededRega cartridges sit lower than most on the market and Rega arms are designed around them. With a deeper third-party cartridge, its rear can touch the record. The spacer lifts the arm by 2 mm and solves the problem. It is also used when a Rega arm is fitted to another make of turntable.

49 €

Rega RB330

The evolution of a legendThe Rega RB330 was designed with 3D CAD/CAM and draws on more than 35 years of Rega tonearm experience. The latest version improves ergonomics, usability and sound: a new bias assembly, a stiffer vertical bearing housing, an integrated arm clip, a spring housing with clearer markings, a new low-capacitance phono cable and a redesigned 100 g counterweight.Where you'll find itThe RB330 is the tonearm fitted to Rega's Planar 3 and Planar 6. As an upgrade it suits turntables with a Rega-type mounting hole and is one of the most worthwhile steps for older models from the company. It is a right-handed 9-inch arm with a cueing lever and adjustable counterweight.Working with cartridgesWith an effective mass of 11 g, the RB330 works superbly with the Nd series MM cartridges and with the Ania, Ania Pro and Apheta 3 MC cartridges. Paired with a phono stage such as the Fono Mini A2D, it completes a system with a clean, lively presentation. The cartridge is sold separately.

599 €

Rega RB880

Refining an iconic designThe Rega RB880 was designed with 3D CAD and CAM tools and brings together almost 40 years of Rega tonearm experience. It has a new aluminium vertical bearing housing and a redesigned stainless steel sleeve and vertical bearing shaft, for greater mounting stability and more rigidity.Its place in the rangeThe RB880 is the tonearm fitted to the Planar 8 and the Planar 6 RS. It sits between the RB330 and the hand-built RB3000, offering much of the technology of the more expensive arms at a more accessible level. As an upgrade, it suits any turntable with a Rega-type mounting hole.Working with cartridgesWith an effective mass of 11 g and hand-selected bearings, the RB880 brings out the best in high-resolution cartridges such as the Ania Pro, Apheta 3 and Nd9. The cartridge is sold separately.

999 €

Rega RB3000

Where tonearm design reaches its limitsThe Rega RB3000 is a reference tonearm with new features that, according to Rega, push the boundaries of tonearm design. Every unit is built entirely by hand by skilled technicians. The improved bearings are selected one by one to match their spindle on both inside and outside diameter, a method that recovers more detail from the record surface.Its place in the rangeThe RB3000 is the tonearm supplied with the Planar 10, Rega's reference turntable, and its new vertical bearing assembly was designed specifically for it. As an upgrade, it fits any turntable with a Rega-type mounting hole and is the final step before the RB Titanium.Recommended cartridgesRega recommends the RB3000 with its moving coil cartridges: the Aphelion 2, Apheta 3, Ania Pro and Ania. With the Aphelion 2 and the Aura MC phono stage it forms the company's reference replay system. The cartridge is sold separately.

1.999 €

Rega Turntable Lid Clear

Genuine Rega spareThe Rega Turntable Lid is the clear dust cover supplied with Rega’s full-size turntables. It comes ready hinged and Rega badged, for direct fitting in place of a worn or missing lid.Protection for turntable and cartridgeDust is the main enemy of styli and records. A properly fitting lid keeps platter, tonearm and cartridge clean when the turntable is not in use, and guards against accidental knocks.

89 €

Rega EBLT Advanced Drive Belt

Rega’s standard-fit beltThe Advanced EBLT is the drive belt Rega fits at the factory to the Planar 1, Planar 1 Plus, Planar 2 and Planar 3. As a spare it returns an older Rega to correct, stable speed, and on earlier models that used a basic belt it is a genuine upgrade.When to replace itA drive belt is a consumable: over the years it loses elasticity and speed starts to drift. If the platter is slow to come up to speed, pitch sounds slightly off or the belt looks slack, it is time for a new one. Fitting takes a few minutes and needs no tools.

30 €