Kanto TT-CS20

Kanto TT-AM

The TT-AM replaces a turntable's factory slipmat with a rigid acrylic mat. Acrylic has a stiffness close to that of vinyl, so the record rests on a surface that does not resonate along with it. Less platter resonance Kanto designed the mat to damp platter vibration and resonance. With less energy returning to the stylus, the manufacturer describes the result as a cleaner sound and a tighter low end. A steady hold, less dust The flat acrylic surface holds the record firmly in place and reduces static, and with it the dust that clings to vinyl. A recess at the centre clears the record label. It suits 12-inch platters and works at 33⅓ and 45 RPM.

24 ,8 €

New

Kanto TT-CRM

The TT-CRM is a turntable mat made from a blend of cork and rubber. Cork damps vibration while rubber adds mass and grip, so the record sits steadily on the platter. A quieter surface The blend of the two materials absorbs unwanted energy returning from the platter to the stylus. According to the manufacturer this translates into a quieter background and a more stable presentation. No static, no slipping Unlike felt, cork does not build up a static charge and does not cling to the record when you lift it. It suits 12-inch platters and works at 33⅓ and 45 RPM.

24 ,8 €

New

Kanto TT-SB

The TT-SB brings two tools together: a carbon fibre brush for the record and a soft brush for the stylus, with a magnetic cover that protects both. Carbon fibre for the groove The carbon fibres reach into the groove and lift dust and debris without marking the vinyl. Carbon is also conductive, so it discharges the static a record builds up. And for the stylus The detachable soft brush clears the dust that collects on the stylus tip during listening. Both brushes are protected by the magnetic cover when not in use.

29 ,76 €

New

Kanto TT-GKIT

The TT-GKIT cleans both record and stylus without liquids and without brushes. It holds a silicone roller for the vinyl and a cleaning gel for the stylus tip. Silicone roller The roller lifts dust from the record surface without scratching and without leaving residue. It washes with water and is reusable. Gel for the stylus The stylus rests briefly on the gel and lifts away clean. No scrubbing and no cleaning fluid are needed, and no residue is left on the tip.

24 ,8 €

New

Kanto TT-AKIT

The TT-AKIT gathers the three tools needed to set up a turntable properly: a stylus force gauge, a cartridge alignment protractor and a bubble level. The right tracking force The gauge measures the force with which the stylus sits in the groove. Too little means instability and distortion, too much means needless wear on the vinyl. Alignment and levelling The protractor shows whether the cartridge sits correctly over the groove, and the bubble level confirms the turntable is flat. Both are needed at first setup and whenever a cartridge is changed.

49 ,6 €

New

Kanto TT-IS20 White

A set of 20 inner sleeves for 12-inch records, in poly-lined paper, white. Less static, less wear The lining reduces static and protects the record surface from the fine scuffing plain paper leaves behind. Easy to use They have a label window and cut corners, so the record slides in and out without catching.

19 ,84 €

New