MENU
We will notify you as soon as the product is in stock in our warehouse! The orders will be placed in priority order and we do not guarantee that the price will remain the same.
New
Kanto TT-AKIT
SKU: APA2026-01085
-
36 Instalments
-
2 Years Warranty
-
36 Instalments
-
2 Years Warranty
49
,6 €
Available for shipping within 2-3 days
Collect from our store within 2-3 days
Add to cart
List
Related products
Kanto TT-AM
The TT-AM replaces a turntable's factory slipmat with a rigid acrylic mat. Acrylic has a stiffness close to that of vinyl, so the record rests on a surface that does not resonate along with it.
Less platter resonance
Kanto designed the mat to damp platter vibration and resonance. With less energy returning to the stylus, the manufacturer describes the result as a cleaner sound and a tighter low end.
A steady hold, less dust
The flat acrylic surface holds the record firmly in place and reduces static, and with it the dust that clings to vinyl. A recess at the centre clears the record label. It suits 12-inch platters and works at 33⅓ and 45 RPM.
24
,8 €
New
Kanto TT-CRM
The TT-CRM is a turntable mat made from a blend of cork and rubber. Cork damps vibration while rubber adds mass and grip, so the record sits steadily on the platter.
A quieter surface
The blend of the two materials absorbs unwanted energy returning from the platter to the stylus. According to the manufacturer this translates into a quieter background and a more stable presentation.
No static, no slipping
Unlike felt, cork does not build up a static charge and does not cling to the record when you lift it. It suits 12-inch platters and works at 33⅓ and 45 RPM.
24
,8 €
New
Kanto TT-SB
The TT-SB brings two tools together: a carbon fibre brush for the record and a soft brush for the stylus, with a magnetic cover that protects both.
Carbon fibre for the groove
The carbon fibres reach into the groove and lift dust and debris without marking the vinyl. Carbon is also conductive, so it discharges the static a record builds up.
And for the stylus
The detachable soft brush clears the dust that collects on the stylus tip during listening. Both brushes are protected by the magnetic cover when not in use.
29
,76 €
New
Kanto TT-GKIT
The TT-GKIT cleans both record and stylus without liquids and without brushes. It holds a silicone roller for the vinyl and a cleaning gel for the stylus tip.
Silicone roller
The roller lifts dust from the record surface without scratching and without leaving residue. It washes with water and is reusable.
Gel for the stylus
The stylus rests briefly on the gel and lifts away clean. No scrubbing and no cleaning fluid are needed, and no residue is left on the tip.
24
,8 €
New
Kanto TT-CS20
A set of 20 outer sleeves for 12-inch records. The clear sleeves protect the cover from dust, scuffs, creases and fading, without hiding the artwork.
For single and double albums
They fit single and double 12-inch records, gatefold editions included.
19
,84 €
New
Kanto TT-IS20 White
A set of 20 inner sleeves for 12-inch records, in poly-lined paper, white.
Less static, less wear
The lining reduces static and protects the record surface from the fine scuffing plain paper leaves behind.
Easy to use
They have a label window and cut corners, so the record slides in and out without catching.
19
,84 €
New
Turntable setup and alignment kit with three tools
The TT-AKIT gathers the three tools needed to set up a turntable properly: a stylus force gauge, a cartridge alignment protractor and a bubble level.
The right tracking force
The gauge measures the force with which the stylus sits in the groove. Too little means instability and distortion, too much means needless wear on the vinyl.
Alignment and levelling
The protractor shows whether the cartridge sits correctly over the groove, and the bubble level confirms the turntable is flat. Both are needed at first setup and whenever a cartridge is changed.
Three adjustments that matter
A turntable that has not been set up properly does not give what it can, and over time it wears the records. The three tools in this kit cover the three adjustments that matter most.
Tracking force
Every cartridge has a force range specified by its maker, usually around two grams. A tonearm counterweight is not always accurate, so the only way to know is to measure.
Cartridge alignment
The stylus should sit tangent to the groove at specific points across the record. The protractor shows whether the cartridge is set straight in the headshell. Poor alignment is heard as distortion that grows towards the centre of the record.
Levelling
If the turntable is not level, the force you set is not the force reaching the groove, and the arm pulls to one side. The bubble level is the first step, before any other adjustment.
Specifications
Features
- Turntable setup and alignment kit, three tools
- Stylus force gauge
- Cartridge alignment protractor
- Bubble level
In the box
- 1 × stylus force gauge
- 1 × alignment protractor
- 1 × bubble level
Write your Review
How would you rate this product?
Follow us on Social Media
Don't miss out on new products and events by Athens Pro Audio.
Stock Notice
Kanto TT-AKIT
