MENU
We will notify you as soon as the product is in stock in our warehouse! The orders will be placed in priority order and we do not guarantee that the price will remain the same.
New
Kanto TT-CRM
SKU: APA2026-01082
-
36 Instalments
-
2 Years Warranty
-
36 Instalments
-
2 Years Warranty
24
,8 €
Available for shipping within 2-3 days
Collect from our store within 2-3 days
Add to cart
List
Related products
Kanto TT-AM
The TT-AM replaces a turntable's factory slipmat with a rigid acrylic mat. Acrylic has a stiffness close to that of vinyl, so the record rests on a surface that does not resonate along with it.
Less platter resonance
Kanto designed the mat to damp platter vibration and resonance. With less energy returning to the stylus, the manufacturer describes the result as a cleaner sound and a tighter low end.
A steady hold, less dust
The flat acrylic surface holds the record firmly in place and reduces static, and with it the dust that clings to vinyl. A recess at the centre clears the record label. It suits 12-inch platters and works at 33⅓ and 45 RPM.
24
,8 €
New
Kanto TT-SB
The TT-SB brings two tools together: a carbon fibre brush for the record and a soft brush for the stylus, with a magnetic cover that protects both.
Carbon fibre for the groove
The carbon fibres reach into the groove and lift dust and debris without marking the vinyl. Carbon is also conductive, so it discharges the static a record builds up.
And for the stylus
The detachable soft brush clears the dust that collects on the stylus tip during listening. Both brushes are protected by the magnetic cover when not in use.
29
,76 €
New
Kanto TT-GKIT
The TT-GKIT cleans both record and stylus without liquids and without brushes. It holds a silicone roller for the vinyl and a cleaning gel for the stylus tip.
Silicone roller
The roller lifts dust from the record surface without scratching and without leaving residue. It washes with water and is reusable.
Gel for the stylus
The stylus rests briefly on the gel and lifts away clean. No scrubbing and no cleaning fluid are needed, and no residue is left on the tip.
24
,8 €
New
Kanto TT-AKIT
The TT-AKIT gathers the three tools needed to set up a turntable properly: a stylus force gauge, a cartridge alignment protractor and a bubble level.
The right tracking force
The gauge measures the force with which the stylus sits in the groove. Too little means instability and distortion, too much means needless wear on the vinyl.
Alignment and levelling
The protractor shows whether the cartridge sits correctly over the groove, and the bubble level confirms the turntable is flat. Both are needed at first setup and whenever a cartridge is changed.
49
,6 €
New
Kanto TT-CS20
A set of 20 outer sleeves for 12-inch records. The clear sleeves protect the cover from dust, scuffs, creases and fading, without hiding the artwork.
For single and double albums
They fit single and double 12-inch records, gatefold editions included.
19
,84 €
New
Kanto TT-IS20 White
A set of 20 inner sleeves for 12-inch records, in poly-lined paper, white.
Less static, less wear
The lining reduces static and protects the record surface from the fine scuffing plain paper leaves behind.
Easy to use
They have a label window and cut corners, so the record slides in and out without catching.
19
,84 €
New
Cork and rubber turntable mat for 12-inch platters
The TT-CRM is a turntable mat made from a blend of cork and rubber. Cork damps vibration while rubber adds mass and grip, so the record sits steadily on the platter.
A quieter surface
The blend of the two materials absorbs unwanted energy returning from the platter to the stylus. According to the manufacturer this translates into a quieter background and a more stable presentation.
No static, no slipping
Unlike felt, cork does not build up a static charge and does not cling to the record when you lift it. It suits 12-inch platters and works at 33⅓ and 45 RPM.
Cork and rubber
Cork has been used on turntables for decades, and not as a style choice. It is porous and light, and it damps vibration instead of reflecting it.
Why a blend rather than plain cork
Plain cork is light and wears over time. The rubber mixed into it adds mass and grip: the mat sits more firmly on the platter, the record does not shift, and the surface lasts.
The difference from felt
The felt slipmat supplied with most turntables was designed to let the record slip under a DJ hand. For ordinary listening that is not needed, and felt builds up static, collects dust and often lifts with the record.
Fitting
It goes straight in place of the existing slipmat, with no tools and no adjustment. It suits 12-inch platters at both speeds, 33⅓ and 45 RPM. If it needs cleaning, a dry brush or a lightly damp cloth is enough.
Specifications
Features
- Turntable mat in a cork and rubber blend
- Replaces the factory slipmat
- Does not build up static
Materials
- Cork and rubber
Compatibility
- 12-inch platters
- 33⅓ and 45 RPM
In the box
- 1 × TT-CRM mat
Write your Review
How would you rate this product?
Follow us on Social Media
Don't miss out on new products and events by Athens Pro Audio.
Stock Notice
Kanto TT-CRM
