Integrated Stereo Amplifiers

DescriptionThe AXR100D DAB+/FM Stereo Receiver offers a massive 100 watts per channel, a dedicated subwoofer speaker output for improving bass and two sets of speaker outputs. It also features analogue inputs, digital inputs, a phono stage, a DAB+/FM receiver with RDS and a 3.5mm input. In addition, the built-in Bluetooth receiver allows you stream your favourite music from your smartphone, tablet or PC.

DescriptionThe most powerful amplifier in the AX range offers a massive 100 watts per channel, a dedicated subwoofer speaker output for improving bass and two sets of speaker outputs. It also features analogue inputs, digital inputs, a phono stage, an FM/AM receiver with RDS and a 3.5mm input. In addition, the built-in Bluetooth receiver allows you stream your favourite music from your smartphone, tablet or PC.

DescriptionThe IO has been designed to offer exceptional Rega performance at an affordable price point. It uses the same amplifier stage as the multi-award winning Brio now designed to run at 30 W per channel into 8 Ω. The IO features two line level inputs, a high specification Rega moving magnet phono stage, and a dedicated high quality headphone output. The IO will integrate seamlessly into any home audio system whilst remaining simple to use and easy to set up. A must for demonstration.Because music mattersThe IO uses the same power amplifier and phono stage as its larger brother, the multi-award winning Brio. The IO aims to deliver exceptional sound quality in a smaller and more cost effective package. The class A/B circuit shares its DNA with the rest of Rega’s amplifiers, and as usual, great care has been taken in component selection. Sanken output transistors and an Alps volume potentiometer and a linear power supply that enables an output of 30 watts per channel into 8 Ω. Two line level inputs and a high quality moving magnet phono input are available as sources. There is a headphone output provided on the front of the unit for powering standard hi-fi headphones; this is driven from the power amplifier stage of the unit through relays to avoid signal degradation when headphones are inserted or the product is muted. A new redesigned mini remote handset is included.Key Features: Integrated phono stageHeadphone socketMini remote controlAll new custom designed chasisLifetime warranty against manufacture defects 

DescriptionThe Rega Aethos stereo amplifier is housed in a brand new, custom designed case. Employing four 160 W 16 Amp output transistors per channel, this delivers 156 W per channel into 6 Ω. The Aethos is a dual mono design using a custom wound toroidal transformer and regulated supplies for the sensitive amplification and driver stages. The pre-amplifier stage uses class-A discrete circuitry throughout. The Aethos is a no compromise product with one goal, to deliver your music as faithfully as possible.Design InnovationOur time, effort and money have been spent on developing the circuit and construction, utilizing the highest specification of components throughout. As part of the design we have included useful features such as the switchable direct input and preamplifier output, to enable the new Aethos amplifier to be used in a wide combination of systems. The headphone socket has been integrated such that the speaker switching is performed by the output mute relay as so not to obstruct the signal path and degrade the sound quality.We have taken the design concepts underpinning the multi award winning and hugely successful Elex-R and Elicit-R and propelled the performance to the next level and beyond with a 125watt dual mono design with features such as fully discrete FET based line amplifier, polypropylene capacitors throughout the signal path, K-Power reservoir capacitors, power amplifier regulated supply and a high current output stage comprising of four 160w Sanken output transistors per channel.Key Features:156 W per channel into 6 Ω (125 W per channel into 8 Ω)Dual mono design5 Line inputsHeadphone socketRemote controlDirect inputRecord outPre-amp outLifetime warranty against manufacture defects

Wireless Multi-Room Music Streaming AmplifierThe Bluesound POWERNODE is the hifi amp reinvented for the streaming age, combining audiophile-grade componentry and multi-room music capabilities to create an intuitive "just add speakers" hi-res sound system for modern music lovers.The Bluesound POWERNODE is the HiFi amp reinvented for the streaming age, combining audiophile-grade componentry and multi-room music capabilities to create an intuitive “just add speakers” hi-res sound system for modern music lovers. The compact minimalist exterior disguises 2 x 80 watts of award-winning HiFi amplification, a premium hi-res DAC design, and access to all the music ever recorded with a tap in our BluOS Controller app for smart devices and laptops.Easily drive your existing pair of premium speakers.80 Watts per channel of HybridDigital™ amplification technologyA state of the art Quad-Core 1.8GHz ARM® Cortex™ A53 processor and a 32-bit/384khz premium DAC design ensure flawless playback with precision and clarity.HDMI (ARC & eARC) connectivity.Featuring digital, optical and analog input options, wired and wireless headphone and subwoofer outputs.Wireless Dolby® surround sound.Dual band Wi-Fi, Gigabit Ethernet and support for 2-way Bluetooth aptX™ HD Bluetooth ensures music playback without interruption.Hi-res audio streaming with access to Internet radio stations, cloud music services, and your own local music library to multiple Bluesound Players.Create and control a seamless multi-room system with the intuitive BluOS Controller app.Top panel touch controls with presets.IR input and remote learning capability – Control it with the optional Bluesound RC1 Remote Controller.Connect with the BluVoice skill in the Alexa app and use Amazon's Alexa voice assistant to control Players around the home.AirPlay 2 lets you play music or podcasts from wireless stereo components throughout your house — all in sync.Just Add Speakers Source, control, and amplification come packed into the compact and minimalist POWERNODE. Get the most out of your favorite speakers with an award-winning audiophile-grade amplifier that features 80 watts per channel of zero-distortion power. A premium DAC design flawlessly delivers hi-res, studio-quality music, including support for FLAC, MQA, and other popular file formats. The BluOS Controller app connects you to popular streaming services like Spotify, Tidal, Qobuz, SiriusXM, and dozens of others, or from your own music library through Apple Airplay2, aptX™ HD Bluetooth, or even a network-connected drive or USB hard drive.High Res Music EverywhereWhether it’s one or many rooms, the POWERNODE is a versatile workhorse. It can be placed either freestanding or in a custom installation rack, allowing you to easily toggle back and forth amongst a number of listening set-ups. Looking for a traditional 2-channel audiophile listening experience? Just add a pair of your favorite speakers. Add the PULSE SUB+ to your 2-channel set-up to create a capable and musical 2.1 wireless system. Bring a pair of PULSE FLEX 2i to the party as rear channel additions to your 2.1 system for a wireless Dolby surround sound home theatre experience. Sprinkle other BLUESOUND players around your home for a whole-home multiroom audio solution.Plays Well With Others The POWERNODE supports HDMI eARC, dual-band Wi-Fi and Gigabit Ethernet, Apple Airplay 2, two-way aptX™ HD Bluetooth, RCA, Toslink optical, 3.5mm jack, and USB Type A connectors. Bring music into your POWERNODE from dozens of internet radio and streaming services, Bluetooth devices, TV and gaming consoles, network or local hard drives, nearby Apple devices, CD players, and many others. Then send your music into your favorite speakers, other Bluesound players or BluOS devices, Bluetooth headphones, wired headphones, Apple AirPlay devices, or other network-connected speakers."B" Is For "Brains"With BluOS you can easily create a DIY multiroom hi-res audio system with a few taps of the BluOS Controller app. Additional hands-free controls are available through voice assistants like Siri, Google Voice, or Alexa. For professional smart home installers, full-feature drivers are available for Lutron, Crestron, RTI, Elan, and other popular control systems.Hi-Res Music EverywhereSeamlessly connect the POWERNODE to multiple Bluesound speakers throughout the home with the BluOS Controller app and create an intuitive multi-room music system unlike any other.

Wireless Multi-Room Music Streaming AmplifierThe Bluesound POWERNODE is the hifi amp reinvented for the streaming age, combining audiophile-grade componentry and multi-room music capabilities to create an intuitive "just add speakers" hi-res sound system for modern music lovers.The Bluesound POWERNODE is the HiFi amp reinvented for the streaming age, combining audiophile-grade componentry and multi-room music capabilities to create an intuitive “just add speakers” hi-res sound system for modern music lovers. The compact minimalist exterior disguises 2 x 80 watts of award-winning HiFi amplification, a premium hi-res DAC design, and access to all the music ever recorded with a tap in our BluOS Controller app for smart devices and laptops.Just Add Speakers Source, control, and amplification come packed into the compact and minimalist POWERNODE. Get the most out of your favorite speakers with an award-winning audiophile-grade amplifier that features 80 watts per channel of zero-distortion power. A premium DAC design flawlessly delivers hi-res, studio-quality music, including support for FLAC, MQA, and other popular file formats. The BluOS Controller app connects you to popular streaming services like Spotify, Tidal, Qobuz, SiriusXM, and dozens of others, or from your own music library through Apple Airplay2, aptX™ HD Bluetooth, or even a network-connected drive or USB hard drive.High Res Music EverywhereWhether it’s one or many rooms, the POWERNODE is a versatile workhorse. It can be placed either freestanding or in a custom installation rack, allowing you to easily toggle back and forth amongst a number of listening set-ups. Looking for a traditional 2-channel audiophile listening experience? Just add a pair of your favorite speakers. Add the PULSE SUB+ to your 2-channel set-up to create a capable and musical 2.1 wireless system. Bring a pair of PULSE FLEX 2i to the party as rear channel additions to your 2.1 system for a wireless Dolby surround sound home theatre experience. Sprinkle other BLUESOUND players around your home for a whole-home multiroom audio solution.Plays Well With Others The POWERNODE supports HDMI eARC, dual-band Wi-Fi and Gigabit Ethernet, Apple Airplay 2, two-way aptX™ HD Bluetooth, RCA, Toslink optical, 3.5mm jack, and USB Type A connectors. Bring music into your POWERNODE from dozens of internet radio and streaming services, Bluetooth devices, TV and gaming consoles, network or local hard drives, nearby Apple devices, CD players, and many others. Then send your music into your favorite speakers, other Bluesound players or BluOS devices, Bluetooth headphones, wired headphones, Apple AirPlay devices, or other network-connected speakers."B" Is For "Brains"With BluOS you can easily create a DIY multiroom hi-res audio system with a few taps of the BluOS Controller app. Additional hands-free controls are available through voice assistants like Siri, Google Voice, or Alexa. For professional smart home installers, full-feature drivers are available for Lutron, Crestron, RTI, Elan, and other popular control systems.Hi-Res Music EverywhereSeamlessly connect the POWERNODE to multiple Bluesound speakers throughout the home with the BluOS Controller app and create an intuitive multi-room music system unlike any other.

Compact Wireless Music Streaming Amplifier The POWERNODE EDGE is the perfect segue into “just add speakers” HiFi for the streaming age, combining streaming sources, control and amplification in a sleek and affordable device.Add a little extra power with the POWERNODE EDGE, the perfect entry point into “just add speakers” HiFi for the streaming age, combining streaming sources, control, and amplification all in one place. Audiophile-grade componentry capable of up to 24 bits/192 kHz hi-res audio, and wireless multi-room capabilities with smartphone controls combine to make the POWERNODE EDGE a great ‘building block’ amplifier to start, extend or complete a hi-res streaming audio system of any size.Easily power a pair of passive speakers40 Watts per channel of DirectDigital™ amplification technology handling 24 bit/192 kHz filesA state-of-the-art Quad-Core 1.8GHz ARM® Cortex A53 ProcessorHDMI eARC connectivityDigital optical and analog input options, subwoofer output, and Bluetooth® wireless headphone outputDolby® Digital decodingDual-band Wi-Fi, Gigabit Ethernet and support for 2-way Bluetooth® aptX™ HDStream hi-res content from internet radio stations, cloud music services or your own local music playersIntuitive control with the BluOS Controller appElegant capacitive touch panel for quick-access controls (Play, Pause, Volume Up/Down, Previous/Next Track)Includes an easy-to-install, multi-orientation wall-mounting bracketIR remote learning capability – optional control using the RC1 Remote ControllerConnect with the BluVoice skill to enable voice assistants like Alexa, Google Assistant and Siri to control Players around the home.AirPlay 2 lets you play music or podcasts from wireless stereo components throughout your house — all in sync.Just Add SpeakersAll you need to do is connect a pair of passive speakers to experience an incredible all-in-one HiFi solution. Easily connect wired sources, like a TV or turntable, with HDMI eARC or the combo analog/digital input. Add the PULSE SUB+ Wireless Subwoofer for a powerful but compact 2.1 stereo system or even use the POWERNODE EDGE to power the rear channels of a wireless Bluesound surround sound setup. Using the BluOS Controller App, select songs from popular streaming services like Spotify, Tidal, Qobuz, SiriusXM, from your own music library through Apple Airplay2, aptX™ HD Bluetooth®, or even a network-connected drive or USB hard drive.Compact PowerBring your speakers to life with the powerful, punchy 2 x 40 watts DirectDigital™ amplifier in the POWERNODE EDGE, able to handle hi-res, 24 bit/192 kHz files and MQA-encoded tracks with ease. Enjoy clarity in playback of everything from densely-layered heavy metal tracks to whisper-quiet dialogue in movies and TV shows. The POWERNODE EDGE decodes Dolby® Digital content on its own and can also be used to power the rear channel speakers of a wireless home theater system.Space SavingYour sonic oasis doesn’t have to take up all your real estate. With the POWERNODE EDGE, gone are the days of bulky, oversized amplifiers. Comparable in size to the average hardcover book, this small yet mighty HiFi system transforms any space into a high-fidelity haven.Hi-Res For Every CornerThe sleek and compact form factor of the POWERNODE EDGE makes it ideal for secondary rooms like offices and back porches. Equip speakers in every corner of your house with power plus streaming and hide the POWERNODE EDGE away from sight in nooks like closets or behind sofas using the included multi-orientation wall-mount bracket.Intuitive ControlControl is always at your fingertips via the BluOS Controller app for iOS, Android, Mac, PC, or using the elegant capacitive touch panel for quick-access controls like Play, Pause, and Volume Up/Down, and Previous/Last Track. The POWERNODE EDGE connects to your home network via Wi-Fi or Ethernet. Hands-free control is possible with voice assistants like Siri, Alexa, and Google Voice. For professional smart home installers, full-feature drivers are available for Lutron, Crestron, RTI, Elan, and other popular control systems.

Compact Wireless Music Streaming Amplifier The POWERNODE EDGE is the perfect segue into “just add speakers” HiFi for the streaming age, combining streaming sources, control and amplification in a sleek and affordable device.Add a little extra power with the POWERNODE EDGE, the perfect entry point into “just add speakers” HiFi for the streaming age, combining streaming sources, control, and amplification all in one place. Audiophile-grade componentry capable of up to 24 bits/192 kHz hi-res audio, and wireless multi-room capabilities with smartphone controls combine to make the POWERNODE EDGE a great ‘building block’ amplifier to start, extend or complete a hi-res streaming audio system of any size.Easily power a pair of passive speakers40 Watts per channel of DirectDigital™ amplification technology handling 24 bit/192 kHz filesA state-of-the-art Quad-Core 1.8GHz ARM® Cortex A53 ProcessorHDMI eARC connectivityDigital optical and analog input options, subwoofer output, and Bluetooth® wireless headphone outputDolby® Digital decodingDual-band Wi-Fi, Gigabit Ethernet and support for 2-way Bluetooth® aptX™ HDStream hi-res content from internet radio stations, cloud music services or your own local music playersIntuitive control with the BluOS Controller appElegant capacitive touch panel for quick-access controls (Play, Pause, Volume Up/Down, Previous/Next Track)Includes an easy-to-install, multi-orientation wall-mounting bracketIR remote learning capability – optional control using the RC1 Remote ControllerConnect with the BluVoice skill to enable voice assistants like Alexa, Google Assistant and Siri to control Players around the home.AirPlay 2 lets you play music or podcasts from wireless stereo components throughout your house — all in sync.Just Add SpeakersAll you need to do is connect a pair of passive speakers to experience an incredible all-in-one HiFi solution. Easily connect wired sources, like a TV or turntable, with HDMI eARC or the combo analog/digital input. Add the PULSE SUB+ Wireless Subwoofer for a powerful but compact 2.1 stereo system or even use the POWERNODE EDGE to power the rear channels of a wireless Bluesound surround sound setup. Using the BluOS Controller App, select songs from popular streaming services like Spotify, Tidal, Qobuz, SiriusXM, from your own music library through Apple Airplay2, aptX™ HD Bluetooth®, or even a network-connected drive or USB hard drive.Compact PowerBring your speakers to life with the powerful, punchy 2 x 40 watts DirectDigital™ amplifier in the POWERNODE EDGE, able to handle hi-res, 24 bit/192 kHz files and MQA-encoded tracks with ease. Enjoy clarity in playback of everything from densely-layered heavy metal tracks to whisper-quiet dialogue in movies and TV shows. The POWERNODE EDGE decodes Dolby® Digital content on its own and can also be used to power the rear channel speakers of a wireless home theater system.Space SavingYour sonic oasis doesn’t have to take up all your real estate. With the POWERNODE EDGE, gone are the days of bulky, oversized amplifiers. Comparable in size to the average hardcover book, this small yet mighty HiFi system transforms any space into a high-fidelity haven.Hi-Res For Every CornerThe sleek and compact form factor of the POWERNODE EDGE makes it ideal for secondary rooms like offices and back porches. Equip speakers in every corner of your house with power plus streaming and hide the POWERNODE EDGE away from sight in nooks like closets or behind sofas using the included multi-orientation wall-mount bracket.Intuitive ControlControl is always at your fingertips via the BluOS Controller app for iOS, Android, Mac, PC, or using the elegant capacitive touch panel for quick-access controls like Play, Pause, and Volume Up/Down, and Previous/Last Track. The POWERNODE EDGE connects to your home network via Wi-Fi or Ethernet. Hands-free control is possible with voice assistants like Siri, Alexa, and Google Voice. For professional smart home installers, full-feature drivers are available for Lutron, Crestron, RTI, Elan, and other popular control systems.

Hi-Fi Stereo Hybrid Power AmplifierThe MR 750 allows the combination of tube and transistor technology in all possible media. Here you can finally find an all-in-one solution for lovers of classic 43 cm components, which can be perfectly combined with Magnat hi-fi components.Sensitivity And PowerWith carefully selected ECC81 tubes, the MR 750 delivers exactly the sound connoisseurs value.Five high-level analogue inputs, 4 digital inputs plus a phono input for MM systems form the basis so that you can also connect large systems without any difficulty. In addition, Bluetooth with lossless aptX standard is included for the best sound from smartphone, tablet or computer. The FM and DAB+ tuner opens up a whole range of analogue and digital stations to fans, who can store them in up to 40 station memory locations.MAGNAT MR 750 – HDMI And Bluetooth On BoardThe number of exciting sources for music and audio is constantly growing. You are well equipped for this with the MR 750 because, in addition to a wide range of analog and digital, it also allows direct connection to turntables, communicates with smartphones and tablets via Bluetooth. It also creates a seamless connection to the TV and all connected sources via HDMI. With the latter, the volume can be easily adjusted using the TV remote control. For all other sources, this is done using the supplied system remote control.Discrete UpdateA metal housing and a solid aluminum front panel and controls speak for themselves every time you touch them and give you a feel for the aural delights the MR 750 offers. Input sources and station names are visible on the elegant display. Other than that, just let yourself enjoy music, movies and more from almost any source in unimaginable quality.

DescriptionAnni is a desktop integrated amplifier that introduces our next-generation ULTIMA technology to both headphones and compact loudspeakers.Anni is our first-ever desktop integrated amplifier. Capable of driving both headphones and compact loudspeakers, Anni benefits from the company’s proprietary ULTIMA circuit topology and is perfectly positioned to exploit the full potential of today’s high-performance headphones, desktop monitors and high-resolution audio sources.The new Anni desktop integrated amplifier forms part of the Qutest range and seamlessly complements the resolving abilities of the multi-award-winning Qutest standalone DAC and Huei phono stage. As a system, the Qutest components provide an unrivalled desktop audio solution, offering class-leading digital and analogue technologies for the modern music lover. The company’s compact QSS (Qutest Stand System) modular equipment rack provides the perfect support, too.Anni offers the recently announced dual-feed-forward error-correction circuit topology whether using headphones or compact loudspeakers. Anni’s advanced technology allows it to drive any headphone load, error-monitored and compensated amplification at all times.Benefitting from both 3.5mm headphone outputs and ¼-inch (6.35mm) outputs, so two can listen simultaneously, plus 4mm banana-type loudspeaker outputs, Anni delivers 10 watts of quality ULTIMA amplification, controlled by a fascia-mounted volume control that also doubles as an input selector switch for Anni’s two line-level inputs. A two-stage gain control for loudspeakers provides additional flexibility with a wide range of desktop monitors.

The Denon PMA-900HNE Integrated Network Amplifier, featuring Advanced High Current amplifier design, delivers superior audio from analog and digital sources. With Phono input, digital inputs for TV sound, plus network audio streaming by HEOS® Built-in, Denon PMA-900HNE upgrades your listening experience from any source.Streaming amplifier with analog and digital connectivityBring out the best from your analog, digital, and streaming sources with the Denon PMA-900HNE Integrated Network Amplifier featuring Advanced High Current amplifier design.Advanced High Current integrated amplifier with 85WEngineered with premium Denon amplifier technology and Advanced High Current capability, the PMA-900HNE integrated amplifier drives your loudspeakers with 85 watts of power-per-channel into 4 ohms.Built-in music streaming via Wi-Fi, Bluetooth, and AirPlay 2 capabilityThe HEOS® Built-in Wi-Fi connects to your network to provide near-limitless streaming options. Listen to a wide array of online music services or connect to a smart device via AirPlay 2 or Bluetooth.Optical and coaxial digital inputsThe PMA-900HNE features three optical inputs and one coaxial input and supports PCM signals up to 192 kHz/24-bit to improve sound quality of your TV audio and more.

The Denon PMA-900HNE Integrated Network Amplifier, featuring Advanced High Current amplifier design, delivers superior audio from analog and digital sources. With Phono input, digital inputs for TV sound, plus network audio streaming by HEOS® Built-in, Denon PMA-900HNE upgrades your listening experience from any source.Streaming amplifier with analog and digital connectivityBring out the best from your analog, digital, and streaming sources with the Denon PMA-900HNE Integrated Network Amplifier featuring Advanced High Current amplifier design.Advanced High Current integrated amplifier with 85WEngineered with premium Denon amplifier technology and Advanced High Current capability, the PMA-900HNE integrated amplifier drives your loudspeakers with 85 watts of power-per-channel into 4 ohms.Built-in music streaming via Wi-Fi, Bluetooth, and AirPlay 2 capabilityThe HEOS® Built-in Wi-Fi connects to your network to provide near-limitless streaming options. Listen to a wide array of online music services or connect to a smart device via AirPlay 2 or Bluetooth.Optical and coaxial digital inputsThe PMA-900HNE features three optical inputs and one coaxial input and supports PCM signals up to 192 kHz/24-bit to improve sound quality of your TV audio and more.

INTEGRATED STEREO AMPLIFIER WITH STREAMING BUILT-INMarantz has reimagined the integrated amplifier for the digital age while preserving a luxurious analog feel and sound.Multiroom streaming with HEOS Built-inEffortlessly connect via Bluetooth, Apple AirPlay 2, or directly from the HEOS app to play all your favorites from hundreds of streaming services.High-Resolution Digital Streaming Built-InMODEL 40n is for those whose music collection is infinite and online. Connect to your network with Wi-Fi or ethernet. With HEOS® Built-in, you won’t need extra equipment to stream your favorite tunes. MODEL 40n supports Spotify, AirPlay 2, Apple Music, Bluetooth, Tidal, TuneIn, and more services—plus, playback of your own collection via USB-A input or on compatible home servers.The Marantz Musical Phono EQThe joy of vinyl playback is both audible and tactile yet requires highly specialized electronics for high performance. The Marantz Musical Phono EQ is built in so you can connect a turntable with MM cartridge directly to MODEL 40n. You’ll enjoy your favorite records and discover new ones, all without the burden of additional electronics.Precise Tone ControlYour sound preferences at your fingertips. Adjust bass and treble to suit your sound or bypass for the purest sound possible.Luxurious Look and FeelMODEL 40n follows a long line of historic Marantz pieces notable for their exquisite design. Every aspect is considered—from premium materials, symmetry, classic porthole display, and even smooth operation of the volume control. Your stereo doesn’t need to look like lab equipment. Marantz MODEL 40n begs to be heard, seen, and touched.Hyper Dynamic Amplifier ModulesTo preserve the detail, nuance, and essence of the music you love, Marantz developed HDAM (Hyper Dynamic Amplifier Modules) which are superior in their speed and response to off-the-shelf modules found in other products. MODEL 40n leverages this unique Marantz innovation to ensure whatever you’re listening to is always the most musical.Subwoofer OutputDeep bass is a visceral and exciting sensation. When partnered with equally excellent speakers, MODEL 40n produces impressive bass. If you want more, add a subwoofer using the dedicated subwoofer output and dial in the low-frequency crossover settings and level for precise integration with your main loudspeakers.

INTEGRATED STEREO AMPLIFIER WITH STREAMING BUILT-INMarantz has reimagined the integrated amplifier for the digital age while preserving a luxurious analog feel and sound.Multiroom streaming with HEOS Built-inEffortlessly connect via Bluetooth, Apple AirPlay 2, or directly from the HEOS app to play all your favorites from hundreds of streaming services.High-Resolution Digital Streaming Built-InMODEL 40n is for those whose music collection is infinite and online. Connect to your network with Wi-Fi or ethernet. With HEOS® Built-in, you won’t need extra equipment to stream your favorite tunes. MODEL 40n supports Spotify, AirPlay 2, Apple Music, Bluetooth, Tidal, TuneIn, and more services—plus, playback of your own collection via USB-A input or on compatible home servers.The Marantz Musical Phono EQThe joy of vinyl playback is both audible and tactile yet requires highly specialized electronics for high performance. The Marantz Musical Phono EQ is built in so you can connect a turntable with MM cartridge directly to MODEL 40n. You’ll enjoy your favorite records and discover new ones, all without the burden of additional electronics.Precise Tone ControlYour sound preferences at your fingertips. Adjust bass and treble to suit your sound or bypass for the purest sound possible.Luxurious Look and FeelMODEL 40n follows a long line of historic Marantz pieces notable for their exquisite design. Every aspect is considered—from premium materials, symmetry, classic porthole display, and even smooth operation of the volume control. Your stereo doesn’t need to look like lab equipment. Marantz MODEL 40n begs to be heard, seen, and touched.Hyper Dynamic Amplifier ModulesTo preserve the detail, nuance, and essence of the music you love, Marantz developed HDAM (Hyper Dynamic Amplifier Modules) which are superior in their speed and response to off-the-shelf modules found in other products. MODEL 40n leverages this unique Marantz innovation to ensure whatever you’re listening to is always the most musical.Subwoofer OutputDeep bass is a visceral and exciting sensation. When partnered with equally excellent speakers, MODEL 40n produces impressive bass. If you want more, add a subwoofer using the dedicated subwoofer output and dial in the low-frequency crossover settings and level for precise integration with your main loudspeakers.

In 1990, Musical Fidelity made the first-ever Super Integrated amplifier: the A1000. lt received a rapturous welcome and, even today, second hand, is selling at high prices. The A1000 was the first of a long line of Super Integrated Amplifiers from Musical Fidelity. Its children: the NuVista M3, Tri Vista 300, kW500, M6/500i, NuVista 800 and NuVista 600 all were equally enthusiastically welcomed to the audiophile world. The M8xi is the latest and the best of the breed. General Description The M8xi is a separate preamp with two monobloc power amps sharing a common chassis. Each has its own heat sink and separate transformer. Genuinely dual mono. The preamp has its own separate power supply and is mounted close to the input sockets. Consequently, PCB tracks are very short. This elegant idea ensures that both channels' signals are ultra-low impedance the instant they get into the amplifier. This is a significant detail. Each channel has twelve big bipolar transistors - 200 amps peak to peak is easily available. The metalwork is high quality. The front panel is a custom made fine line extrusion of milspec aluminum. The custom made heat sinks have outstanding dissipation characteristics and finish. The M8xi construction has a feeling of solidity and quality. New Circuitry Over the last 5 years our power amp circuitry has reached a high state of development. In our never-ending quest for improving performance and customer value we have been looking for ways to improve our designs. One of the prime directives was to keep the low feedback configuration unchanged .. continue with low feedback! The problem was how to improve efficiency and performance without affecting the sound quality. If I say so myself, I think we have come up with a brilliant solution. Our new M8xi power amp design gives higher power, lower distortion, and better sound quality. Incredible but true. The output stage efficiency has been increased thus yielding about 10% more power for similar power supply voltage. More importantly, the whole driver stage is pure Class A. We believe that this innovative approach has a substantial effect on the sound quality. The sound stage appears wider whilst the micro and macro dynamics have more impact. This effect is particularly noticeable on well-recorded piano. I am sure you all know the piano is a percussive instrument but in truth, this is rarely audible on most Hi-Fi systems. Using an M8xi a piano‘s percussive nature becomes instantly obvious and jumps out of the loudspeaker. lt is a surprising and satisfying improvement to the sound quality. Vocals have more subtly, detail and presence. Large scale music has depth, width, and incredibly dynamic presentation. All in all the M8xi is a consummate all-rounder. Mostly it sounds like a small Class A amplifier with huge power. The DAC The M8xi also features a 5 input DAC. DACs are increasingly common in integrated amplifier designs to add convenience when connecting a variety of digital sources, so the decision was taken to build-in a DAC that would perform to a high standard, independently of the amplifier. For added integrity, the DAC features its own power supply. Based around the Texas Instruments PCM5242 TI low-distortion and low-noise DAC chip, which is also employed in many other premium products in the hi-fi industry as well as in previous Musical Fidelity products, the M8xi has 2 x coaxial (S/PDIF), 2 x optical (S/PDIF) and 1 x asynchronous USB Type-B inputs. The coaxial and the USB inputs are capable of supporting hi-res audio streams up-to 24-bit / 192kHz, and the optical input is capable of supporting up-to 24-bit / 96kHz. For maximal performance, all data streams are up-sampled and re-clocked by an internal converter to reduce jitter and remove unwanted artifacts in the sound. Technical Performance The M8xi delivers 550 + 550wpc into 8 ohms. It is extremely stable and very linear. The distortion is low too; lower than 0.005% in the audible frequency range of 20 Hz to 20 kHz. The M8xi has remarkable linearity and consistency. lt is unconditionally stable and will drive any loudspeaker in existence easily with ample power reserve. Our Approach to Technical Measurements In our view an amplifier should be completely neutral. lt is ‚a straight wire with gain‘. Easy to say but hard and complex to do. We want to stress that we do not believe that the technical performance is an end in itself. lt is a method of validating the total amplifier system concept. The aim of our circuit/PCB designs is to have low feedback and achieve complete neutrality, transparency, and great technical performance. The proof that we are on the right track is the technical performance. We think that technical performance cannot be summed up by the distortion at 1 kHz. Our view is that an amplifier has to be able to satisfy a wide range of technical requirements before it can be neutral. Linearity Almost all loudspeakers have complex impedance and loading curves. An amplifier must be able to maintain its voltage virtually, regardless of loading. If an amplifier cannot maintain its voltage across the spectrum, then the ultimate frequency response and distortion will be nonlinear. This is not neutrality. Distortion The overwhelming majority of amplifier manufacturers only talk about distortion at 1 kHz. We believe that this is only a fraction of the story. From our perspective, an amplifier must have very low distortion from 20 Hz- 20 kHz and beyond. We believe that an amplifier‘s high-frequency performance proves the total performance of the circuit and PCB layout. The M8xi distortion hardly changes from 10 kHz to 50 kHz. An outstanding achievement and validation of the circuit design and PCB layout. Noise Ratio Amplifiers should be quiet. If they are not, low-level detail is irretrievably lost. Also, the dynamic range is seriously compromised. Dynamic range is not just how much power an amplifier will produce, it is also how quiet it can be. Dynamic range is the total from the quietest to the loudest. The M8xi excels in this respect. Precision Volume Control The M8xi has a precision volume control. This ensures perfect tracking right down to very low levels which is unattainable with standard potentiometers. This outstanding precision is achieved by laser-trimmed substrate resistors. Sound Quality The M8xi is effortless, fluid, and dynamic. lt doesn‘t sound ‚loud‘. lt just sounds right. The dynamics are handled with no drama or fuss. They come and they go. There is no distortion; just pure undiluted music. lt sounds like a superb small Class A amplifier but with limitless headroom. Perfection!

In 1990, Musical Fidelity made the first-ever Super Integrated amplifier: the A1000. lt received a rapturous welcome and, even today, second hand, is selling at high prices. The A1000 was the first of a long line of Super Integrated Amplifiers from Musical Fidelity. Its children: the NuVista M3, Tri Vista 300, kW500, M6/500i, NuVista 800 and NuVista 600 all were equally enthusiastically welcomed to the audiophile world. The M8xi is the latest and the best of the breed. General Description The M8xi is a separate preamp with two monobloc power amps sharing a common chassis. Each has its own heat sink and separate transformer. Genuinely dual mono. The preamp has its own separate power supply and is mounted close to the input sockets. Consequently, PCB tracks are very short. This elegant idea ensures that both channels' signals are ultra-low impedance the instant they get into the amplifier. This is a significant detail. Each channel has twelve big bipolar transistors - 200 amps peak to peak is easily available. The metalwork is high quality. The front panel is a custom made fine line extrusion of milspec aluminum. The custom made heat sinks have outstanding dissipation characteristics and finish. The M8xi construction has a feeling of solidity and quality. New Circuitry Over the last 5 years our power amp circuitry has reached a high state of development. In our never-ending quest for improving performance and customer value we have been looking for ways to improve our designs. One of the prime directives was to keep the low feedback configuration unchanged .. continue with low feedback! The problem was how to improve efficiency and performance without affecting the sound quality. If I say so myself, I think we have come up with a brilliant solution. Our new M8xi power amp design gives higher power, lower distortion, and better sound quality. Incredible but true. The output stage efficiency has been increased thus yielding about 10% more power for similar power supply voltage. More importantly, the whole driver stage is pure Class A. We believe that this innovative approach has a substantial effect on the sound quality. The sound stage appears wider whilst the micro and macro dynamics have more impact. This effect is particularly noticeable on well-recorded piano. I am sure you all know the piano is a percussive instrument but in truth, this is rarely audible on most Hi-Fi systems. Using an M8xi a piano‘s percussive nature becomes instantly obvious and jumps out of the loudspeaker. lt is a surprising and satisfying improvement to the sound quality. Vocals have more subtly, detail and presence. Large scale music has depth, width, and incredibly dynamic presentation. All in all the M8xi is a consummate all-rounder. Mostly it sounds like a small Class A amplifier with huge power. The DAC The M8xi also features a 5 input DAC. DACs are increasingly common in integrated amplifier designs to add convenience when connecting a variety of digital sources, so the decision was taken to build-in a DAC that would perform to a high standard, independently of the amplifier. For added integrity, the DAC features its own power supply. Based around the Texas Instruments PCM5242 TI low-distortion and low-noise DAC chip, which is also employed in many other premium products in the hi-fi industry as well as in previous Musical Fidelity products, the M8xi has 2 x coaxial (S/PDIF), 2 x optical (S/PDIF) and 1 x asynchronous USB Type-B inputs. The coaxial and the USB inputs are capable of supporting hi-res audio streams up-to 24-bit / 192kHz, and the optical input is capable of supporting up-to 24-bit / 96kHz. For maximal performance, all data streams are up-sampled and re-clocked by an internal converter to reduce jitter and remove unwanted artifacts in the sound. Technical Performance The M8xi delivers 550 + 550wpc into 8 ohms. It is extremely stable and very linear. The distortion is low too; lower than 0.005% in the audible frequency range of 20 Hz to 20 kHz. The M8xi has remarkable linearity and consistency. lt is unconditionally stable and will drive any loudspeaker in existence easily with ample power reserve. Our Approach to Technical Measurements In our view an amplifier should be completely neutral. lt is ‚a straight wire with gain‘. Easy to say but hard and complex to do. We want to stress that we do not believe that the technical performance is an end in itself. lt is a method of validating the total amplifier system concept. The aim of our circuit/PCB designs is to have low feedback and achieve complete neutrality, transparency, and great technical performance. The proof that we are on the right track is the technical performance. We think that technical performance cannot be summed up by the distortion at 1 kHz. Our view is that an amplifier has to be able to satisfy a wide range of technical requirements before it can be neutral. Linearity Almost all loudspeakers have complex impedance and loading curves. An amplifier must be able to maintain its voltage virtually, regardless of loading. If an amplifier cannot maintain its voltage across the spectrum, then the ultimate frequency response and distortion will be nonlinear. This is not neutrality. Distortion The overwhelming majority of amplifier manufacturers only talk about distortion at 1 kHz. We believe that this is only a fraction of the story. From our perspective, an amplifier must have very low distortion from 20 Hz- 20 kHz and beyond. We believe that an amplifier‘s high-frequency performance proves the total performance of the circuit and PCB layout. The M8xi distortion hardly changes from 10 kHz to 50 kHz. An outstanding achievement and validation of the circuit design and PCB layout. Noise Ratio Amplifiers should be quiet. If they are not, low-level detail is irretrievably lost. Also, the dynamic range is seriously compromised. Dynamic range is not just how much power an amplifier will produce, it is also how quiet it can be. Dynamic range is the total from the quietest to the loudest. The M8xi excels in this respect. Precision Volume Control The M8xi has a precision volume control. This ensures perfect tracking right down to very low levels which is unattainable with standard potentiometers. This outstanding precision is achieved by laser-trimmed substrate resistors. Sound Quality The M8xi is effortless, fluid, and dynamic. lt doesn‘t sound ‚loud‘. lt just sounds right. The dynamics are handled with no drama or fuss. They come and they go. There is no distortion; just pure undiluted music. lt sounds like a superb small Class A amplifier but with limitless headroom. Perfection!

JENO Engine (Jitter Elimination and Noise-shaping Optimization) In order to faithfully transmit the massive amount of audio data sent to the speakers without loss, the SU-G700M2 power amp section uses full digital amplification employing the JENO Engine, based on the design concept of reference systems. In order to solve the issue of sound quality degradation due to jitter, which poses problems for conventional digital amplifiers, the SU-G700M2 has an original jitter reduction circuit that eliminates jitter over the entire audible frequency range. Also, a unique, high-precision PWM (Pulse Width Modulation) conversion circuit is used for PWM conversion, which is important for sound quality. By optimising items such as the noise-shaping speed, degree, and quantization number through our unique expertise, data even in the wide dynamic range contained in high-resolution sound sources is converted to PWM signals without loss. These technologies provide reproduction of natural and finely detailed sound, enabling perception even of delicate music nuances. LAPC (Load Adaptive Phase Calibration) Speaker impedance changes with each frequency and a power amplifier is required to drive speakers without being affected by the speaker’s characteristics. However, conventional digital amplifiers are connected to speakers through a low-pass filter at the output stage, so they are even more strongly affected by the speaker impedance characteristics. Also, although the amplitude characteristics of conventional amplifiers due to negative feedback were improved, the phase characteristics could not be enhanced. We thus developed a speaker impedance adaptive optimisation algorithm that performs correction to the ideal impulse response through digital signal processing by measuring the frequency amplitude-phase characteristics of the amplifier with the speakers connected. This new technique enables flattening the frequency characteristics of amplitude and phase, which had previously not been achieved by amplifiers, as well as delivering a sound with rich spatial expression. Advanced Speed Silent Power Supply The power supply technology incorporated in the reference-class model SU-R1000 has been employed for improved speaker drive power and a greater feel of energy. The switching frequency has been increased from the conventional 100kHz band to the 400kHz band to ensure stable supply of voltage and current and to reduce adverse effects of modulation noise on the audio quality. The device is equipped with the same GaN FET and SiC SBD as those mounted in the SU-R1000 to deliver maximum performance from the high-speed switching power supply system. What’s more, a Super Low Noise Regulator is provided in the later stage. It prevents the decrease of regulation due to fixed switching frequency and impedes the mixing of noise component into high frequencies. The result is a low-noise and high-response power supply that maximises the performance of the digital amplifier. Three-section Configuration In integrated amplifiers there are a variety of circuits, including circuits that handle the micro-signals of inputs and those that handle a large current, such as output circuits and power-supply circuits. The SU-G700M2 uses a three-section construction with partitions installed between the circuit blocks according to the signal level handled. This eliminates interference between circuit blocks, thus achieving clear sound quality. In addition to the three-section construction, the SU-G700M2 comes with a bottom chassis featuring a two-layer construction with 1.2-mm-thick and 2-mm-thick steel plates, a top panel made of a 1.6-mm-thick steel plate and a 7-mm-thick aluminium front panel for improved vibration damping. Low-noise PHONO Input PHONO MC input is now supported. The PHONO input achieves low noise by using a differential parallel connection configuration of a first-stage, low-noise FET. In addition, four-level gain adjustment enables selection of the best gain according to the cartridge output. This enables optimal playback of high-grade analogue recorded sound sources tailored to the user’s environment. Class AA Headphone Amplifier The SU-G700M2 uses a Class AA headphone amplifier with separate amplifier circuits for voltage amplification and current amplification of the audio signal. The voltage is amplified by a high-grade operational amplifier, the current is amplified by an operational amplifier with high current-supply capability, and the high-grade PWM signal output from the JENO Engine is converted to analogue with high precision, thus enabling headphones to be ideally driven. This makes it possible to reproduce music with low distortion and a wide frequency range no matter what the load impedance of the headphones is.

JENO Engine (Jitter Elimination and Noise-shaping Optimization) In order to faithfully transmit the massive amount of audio data sent to the speakers without loss, the SU-G700M2 power amp section uses full digital amplification employing the JENO Engine, based on the design concept of reference systems. In order to solve the issue of sound quality degradation due to jitter, which poses problems for conventional digital amplifiers, the SU-G700M2 has an original jitter reduction circuit that eliminates jitter over the entire audible frequency range. Also, a unique, high-precision PWM (Pulse Width Modulation) conversion circuit is used for PWM conversion, which is important for sound quality. By optimising items such as the noise-shaping speed, degree, and quantization number through our unique expertise, data even in the wide dynamic range contained in high-resolution sound sources is converted to PWM signals without loss. These technologies provide reproduction of natural and finely detailed sound, enabling perception even of delicate music nuances. LAPC (Load Adaptive Phase Calibration) Speaker impedance changes with each frequency and a power amplifier is required to drive speakers without being affected by the speaker’s characteristics. However, conventional digital amplifiers are connected to speakers through a low-pass filter at the output stage, so they are even more strongly affected by the speaker impedance characteristics. Also, although the amplitude characteristics of conventional amplifiers due to negative feedback were improved, the phase characteristics could not be enhanced. We thus developed a speaker impedance adaptive optimisation algorithm that performs correction to the ideal impulse response through digital signal processing by measuring the frequency amplitude-phase characteristics of the amplifier with the speakers connected. This new technique enables flattening the frequency characteristics of amplitude and phase, which had previously not been achieved by amplifiers, as well as delivering a sound with rich spatial expression. Advanced Speed Silent Power Supply The power supply technology incorporated in the reference-class model SU-R1000 has been employed for improved speaker drive power and a greater feel of energy. The switching frequency has been increased from the conventional 100kHz band to the 400kHz band to ensure stable supply of voltage and current and to reduce adverse effects of modulation noise on the audio quality. The device is equipped with the same GaN FET and SiC SBD as those mounted in the SU-R1000 to deliver maximum performance from the high-speed switching power supply system. What’s more, a Super Low Noise Regulator is provided in the later stage. It prevents the decrease of regulation due to fixed switching frequency and impedes the mixing of noise component into high frequencies. The result is a low-noise and high-response power supply that maximises the performance of the digital amplifier. Three-section Configuration In integrated amplifiers there are a variety of circuits, including circuits that handle the micro-signals of inputs and those that handle a large current, such as output circuits and power-supply circuits. The SU-G700M2 uses a three-section construction with partitions installed between the circuit blocks according to the signal level handled. This eliminates interference between circuit blocks, thus achieving clear sound quality. In addition to the three-section construction, the SU-G700M2 comes with a bottom chassis featuring a two-layer construction with 1.2-mm-thick and 2-mm-thick steel plates, a top panel made of a 1.6-mm-thick steel plate and a 7-mm-thick aluminium front panel for improved vibration damping. Low-noise PHONO Input PHONO MC input is now supported. The PHONO input achieves low noise by using a differential parallel connection configuration of a first-stage, low-noise FET. In addition, four-level gain adjustment enables selection of the best gain according to the cartridge output. This enables optimal playback of high-grade analogue recorded sound sources tailored to the user’s environment. Class AA Headphone Amplifier The SU-G700M2 uses a Class AA headphone amplifier with separate amplifier circuits for voltage amplification and current amplification of the audio signal. The voltage is amplified by a high-grade operational amplifier, the current is amplified by an operational amplifier with high current-supply capability, and the high-grade PWM signal output from the JENO Engine is converted to analogue with high precision, thus enabling headphones to be ideally driven. This makes it possible to reproduce music with low distortion and a wide frequency range no matter what the load impedance of the headphones is.

JENO Engine Jitter is a major cause of distortion in digital systems, and is caused by mis-timing in the master clocks used in digital-to-analogue conversion. To eliminate the degradation of sound caused by jitter, Technics has developed an original jitter reduction circuit, comprising a clock generator in the noise-shaping system to reduce jitter in the low-frequency range and a high-precision sample rate converter for suppressing jitter in the high-frequency range. Thus it reduces jitter in an ideal way over the entire frequency range. This works with original high-precision PWM (Pulse Width Modulation) conversion circuit, optimising the noise-shaping speed, the degree and re-quantisation number, and the PWM gradation, in order to convert high-resolution signals to PWM without causing any damage to the dynamic range. These technologies enable Technics digital amplifier designs to reproduce the natural and delicate nuances of music. ADCT (Active Distortion Cancelling Technology) The Active Distortion Cancelling Technology newly developed by Technics accurately extracts and removes distortion in the power output stage which is generated by the speaker’s counter electromotive force and voltage drops. In the Hi-Fi audio market where an unlimited number of audio systems can be configured by combining various products, high-end audio amplifiers need to optimally drive a diversity of speakers. The Active Distortion Cancelling Technology accurately extracts distortion by determining the difference between the speaker terminal output and JENO output and then applies correction to the output digital signal, thus correcting the conventional digital amp system. This provides powerful speaker driving force and acoustic energy while offering the superior benefits of a digital amplifier, such as low noise, precise sound image and expansive sound ambience, regardless of the types of connected speakers. Advanced Speed Silent Power Supply The SU-R1000 uses a switching power supply system to ensure a stable supply of voltage and current required by the digital amp. In a conventional switching power supply system, the ON time of the switching operation was controlled in order to stabilise the voltage, and this causes the switching frequency to fluctuate according to the load, resulting in a modulation noise to affect the sound quality. The Advanced Speed Silent Power Supply has eliminated this noise by fixing the switching frequency in the 400kHz band. Furthermore, a Super Low Noise Regulator is provided in the later stage. This prevents the decrease of regulation resulting from the fixed switching frequency and impedes the mixing of noise component into high frequencies. The result is a high-response power supply that results in the best performance from the digital amplifier. Four Independent Power Supply Units In the SU-R1000, every element comprising the power supply has been diligently studied and revised for higher sound quality. What’s more, four independent power supply units are provided for different circuit blocks for further enhancement of sound quality. Since the SU-R1000 is an integrated amplifier, the internal circuits consist of a pre-amp stage and power amp stage in a mix of analogue and digital circuits. The Phono-EQ section which processes minute analogue signals is particularly susceptible to the effect of noise transmitted through the power supply line. The SU-R1000 uses separate power supply units for the analogue circuits and digital circuits in the pre-amp stage. It also uses separate power supply units for the right and left channels in the power amp stage that requires large electrical power. With the four independent power supply units, the SU-R1000 prevents power-line-induced interference among the circuit blocks and realises a high S/N ratio and superb separation. High-grade Digital/Analog I/O Circuit The phono input section and analogue input section feature a full-discrete circuit design. Technics has realised an ideal, symmetrical circuit layout and performed meticulous tuning. The new circuits prevent interference between the right and left channels and achieve excellent channel separation. Furthermore, the phono input section and XLR input section employ completely balanced transmission to ensure high-purity signal transmission with minimum effect of noise. The USB input circuit in the digital input section is equipped with a capacitor of high-quality ruby mica and a power conditioner with nonmagnetic carbon film resistors for blocking electrical noise e.g. from a PC and for minimising the effect of external noise. The A/D converter incorporates a high-performance chip made by Asahi Kasei Microdevices (AKM) for high-precision A/D conversion. Thus, the SU-R1000 reproduces outstanding sound quality from any analogue or digital input sources. High Rigidity Chassis and Design The rigidity of the chassis has been enhanced extensively to suppress the enclosure vibration that is also a source of noise. The inner chassis features a double-deck separated structure. Mounted on the upper deck is the power amp section consisting of the amplification circuit and its power supply circuit. Installed on the lower deck is the pre-amp section which is comprised of the analogue input section, including the phono equaliser, and the digital input section as well as the power supply circuits for those circuits. Not only the upper and lower decks but also individual circuit blocks are separated from one another by steel shield plates. These steel shield plates also serve as reinforcing plates for strengthening the rigidity of the entire chassis. On the outside, the front panel is 10-mm thick, while the side panels and top panel are made of 6-mm-thick alumite-treated aluminum plates.They have also improved the rigidity and vibration resistance. The insulators that support the chassis are made of cast iron with excellent signal attenuation characteristics. All in all, the above parts and materials enhance the quality of internal signals and eliminate the effects of external vibrations at highest levels. Input and output terminals made of meticulously selected high-quality parts - Speaker terminals designed to allow connection of extra-large diameter speaker cables - Y-lug terminals for ensuring reliable cable connection - Neutrik-manufactured analogue balance input terminals and PHONO XLR input terminals (exclusively for MC) - Analogue input terminals with gold-plated, machined brass parts Technics’ refined design - Attractive front panel embellished with high-quality hairline surface finish and equipped with an iconic, large dual-needle meter - Volume dial and selector knob made of parts machined from solid aluminum blocks and spin-finished Intelligent Phono EQ The Intelligent Phono EQ mounted in the SU-R1000 utilises the sound quality improvement technology for DSP, which Technics has accumulated through the development of LAPC, in order to realise high sound quality not possible with analogue Phono-EQ. This technology consists of three parts: 1. Accurate EQ Curve, 2. Crosstalk Canceller and 3. Response Optimiser. These functions can be turned ON/OFF to suit the user’s preference. Accurate EQ Curve – Made possible by hybrid analogue/digital circuit design An accurate EQ curve is achieved by a hybrid analogue-digital system. The high-gain low-pass filter (LPF) performs analogue processing, while high frequencies are raised after the A/D conversion. The use of the 40-dB LPF(Low-pass filter) in the analogue region suppresses the bit loss during digital filter processing, and high frequencies are raised with high accuracy in the digital region to achieve a high S/N ratio. Crosstalk Canceller - For measurement and improvement of crosstalk characteristic unique to each cartridge This function measures the crosstalk characteristic of the installed cartridge by using the crosstalk measuring signal recorded on the Calibration Record bundled with the SU-R1000. It then performs reverse-correction using the built-in DSP to achieve significant improvement of the crosstalk characteristic. This results in a more precise sound image and a wider sound ambience. Phono Response Optimiser - For correction of disturbance in cartridge frequency characteristics This function measures the frequency characteristics of the installed pickup cartridge by using a TSP (Time Stretched Pulse) signal recorded on the bundled Calibration Record, and corrects characteristics disturbance. It corrects the effect of impedance matching between the pickup cartridge and the phono equaliser to reveal the true sound quality of the cartridge. This technology aims to improve sound quality by avoiding a selector such as a switch in the high-sensitivity phono input line for the removal of the possibility of noise disturbance. *Although the record may be warped depending on the production method or its characteristics, this record passed the test for proper signal reading and is shipped. *The record may be warped depending on the storage environment in your house. Please note a badly warped record may not only disturb the measurement but also hurt the cartridge.

JENO Engine Jitter is a major cause of distortion in digital systems, and is caused by mis-timing in the master clocks used in digital-to-analogue conversion. To eliminate the degradation of sound caused by jitter, Technics has developed an original jitter reduction circuit, comprising a clock generator in the noise-shaping system to reduce jitter in the low-frequency range and a high-precision sample rate converter for suppressing jitter in the high-frequency range. Thus it reduces jitter in an ideal way over the entire frequency range. This works with original high-precision PWM (Pulse Width Modulation) conversion circuit, optimising the noise-shaping speed, the degree and re-quantisation number, and the PWM gradation, in order to convert high-resolution signals to PWM without causing any damage to the dynamic range. These technologies enable Technics digital amplifier designs to reproduce the natural and delicate nuances of music. ADCT (Active Distortion Cancelling Technology) The Active Distortion Cancelling Technology newly developed by Technics accurately extracts and removes distortion in the power output stage which is generated by the speaker’s counter electromotive force and voltage drops. In the Hi-Fi audio market where an unlimited number of audio systems can be configured by combining various products, high-end audio amplifiers need to optimally drive a diversity of speakers. The Active Distortion Cancelling Technology accurately extracts distortion by determining the difference between the speaker terminal output and JENO output and then applies correction to the output digital signal, thus correcting the conventional digital amp system. This provides powerful speaker driving force and acoustic energy while offering the superior benefits of a digital amplifier, such as low noise, precise sound image and expansive sound ambience, regardless of the types of connected speakers. Advanced Speed Silent Power Supply The SU-R1000 uses a switching power supply system to ensure a stable supply of voltage and current required by the digital amp. In a conventional switching power supply system, the ON time of the switching operation was controlled in order to stabilise the voltage, and this causes the switching frequency to fluctuate according to the load, resulting in a modulation noise to affect the sound quality. The Advanced Speed Silent Power Supply has eliminated this noise by fixing the switching frequency in the 400kHz band. Furthermore, a Super Low Noise Regulator is provided in the later stage. This prevents the decrease of regulation resulting from the fixed switching frequency and impedes the mixing of noise component into high frequencies. The result is a high-response power supply that results in the best performance from the digital amplifier. Four Independent Power Supply Units In the SU-R1000, every element comprising the power supply has been diligently studied and revised for higher sound quality. What’s more, four independent power supply units are provided for different circuit blocks for further enhancement of sound quality. Since the SU-R1000 is an integrated amplifier, the internal circuits consist of a pre-amp stage and power amp stage in a mix of analogue and digital circuits. The Phono-EQ section which processes minute analogue signals is particularly susceptible to the effect of noise transmitted through the power supply line. The SU-R1000 uses separate power supply units for the analogue circuits and digital circuits in the pre-amp stage. It also uses separate power supply units for the right and left channels in the power amp stage that requires large electrical power. With the four independent power supply units, the SU-R1000 prevents power-line-induced interference among the circuit blocks and realises a high S/N ratio and superb separation. High-grade Digital/Analog I/O Circuit The phono input section and analogue input section feature a full-discrete circuit design. Technics has realised an ideal, symmetrical circuit layout and performed meticulous tuning. The new circuits prevent interference between the right and left channels and achieve excellent channel separation. Furthermore, the phono input section and XLR input section employ completely balanced transmission to ensure high-purity signal transmission with minimum effect of noise. The USB input circuit in the digital input section is equipped with a capacitor of high-quality ruby mica and a power conditioner with nonmagnetic carbon film resistors for blocking electrical noise e.g. from a PC and for minimising the effect of external noise. The A/D converter incorporates a high-performance chip made by Asahi Kasei Microdevices (AKM) for high-precision A/D conversion. Thus, the SU-R1000 reproduces outstanding sound quality from any analogue or digital input sources. High Rigidity Chassis and Design The rigidity of the chassis has been enhanced extensively to suppress the enclosure vibration that is also a source of noise. The inner chassis features a double-deck separated structure. Mounted on the upper deck is the power amp section consisting of the amplification circuit and its power supply circuit. Installed on the lower deck is the pre-amp section which is comprised of the analogue input section, including the phono equaliser, and the digital input section as well as the power supply circuits for those circuits. Not only the upper and lower decks but also individual circuit blocks are separated from one another by steel shield plates. These steel shield plates also serve as reinforcing plates for strengthening the rigidity of the entire chassis. On the outside, the front panel is 10-mm thick, while the side panels and top panel are made of 6-mm-thick alumite-treated aluminum plates.They have also improved the rigidity and vibration resistance. The insulators that support the chassis are made of cast iron with excellent signal attenuation characteristics. All in all, the above parts and materials enhance the quality of internal signals and eliminate the effects of external vibrations at highest levels. Input and output terminals made of meticulously selected high-quality parts - Speaker terminals designed to allow connection of extra-large diameter speaker cables - Y-lug terminals for ensuring reliable cable connection - Neutrik-manufactured analogue balance input terminals and PHONO XLR input terminals (exclusively for MC) - Analogue input terminals with gold-plated, machined brass parts Technics’ refined design - Attractive front panel embellished with high-quality hairline surface finish and equipped with an iconic, large dual-needle meter - Volume dial and selector knob made of parts machined from solid aluminum blocks and spin-finished Intelligent Phono EQ The Intelligent Phono EQ mounted in the SU-R1000 utilises the sound quality improvement technology for DSP, which Technics has accumulated through the development of LAPC, in order to realise high sound quality not possible with analogue Phono-EQ. This technology consists of three parts: 1. Accurate EQ Curve, 2. Crosstalk Canceller and 3. Response Optimiser. These functions can be turned ON/OFF to suit the user’s preference. Accurate EQ Curve – Made possible by hybrid analogue/digital circuit design An accurate EQ curve is achieved by a hybrid analogue-digital system. The high-gain low-pass filter (LPF) performs analogue processing, while high frequencies are raised after the A/D conversion. The use of the 40-dB LPF(Low-pass filter) in the analogue region suppresses the bit loss during digital filter processing, and high frequencies are raised with high accuracy in the digital region to achieve a high S/N ratio. Crosstalk Canceller - For measurement and improvement of crosstalk characteristic unique to each cartridge This function measures the crosstalk characteristic of the installed cartridge by using the crosstalk measuring signal recorded on the Calibration Record bundled with the SU-R1000. It then performs reverse-correction using the built-in DSP to achieve significant improvement of the crosstalk characteristic. This results in a more precise sound image and a wider sound ambience. Phono Response Optimiser - For correction of disturbance in cartridge frequency characteristics This function measures the frequency characteristics of the installed pickup cartridge by using a TSP (Time Stretched Pulse) signal recorded on the bundled Calibration Record, and corrects characteristics disturbance. It corrects the effect of impedance matching between the pickup cartridge and the phono equaliser to reveal the true sound quality of the cartridge. This technology aims to improve sound quality by avoiding a selector such as a switch in the high-sensitivity phono input line for the removal of the possibility of noise disturbance. *Although the record may be warped depending on the production method or its characteristics, this record passed the test for proper signal reading and is shipped. *The record may be warped depending on the storage environment in your house. Please note a badly warped record may not only disturb the measurement but also hurt the cartridge.

Tomorrow’s Hi-Fi, Today With Evo 150, we’ve brought your audio past and present into the future. With outstanding Hypex NCore Class D amplification and our class-leading StreamMagic music streaming platform on board, all you need to do is add speakers to enjoy superb high-resolution audio quality from one elegant, discreet box. And thanks to its suite of digital and analogue inputs, as well as its high-quality digital-to-analogue convertor, Evo can be the heart of your hi-fi system for years to come. All-In-One Simplicity – Just Add Speakers Combining streaming smarts and high-class amplification in one box means Evo only needs wiring to mains power and to speakers to serve up thrilling sound quality. Streaming music from Evo means saying goodbye to metres of connection cables, and hello to intuitive, straightforward functionality in one sleek, good-looking box. Easy to Set up, Easy to Use It couldn’t be simpler. Plug Evo into the mains and wire it to your speakers. Then, fire up your favourite music streaming service and connect to Evo using the app, Bluetooth or Evo’s built-in streaming service support. Pick a tune, press play and adjust the volume to your taste. StreamMagic app  The StreamMagic app offers comprehensive control of the entire Evo system, plus access to the world’s most popular and highest-quality music streaming services. It’s clear, logical and stable - so Evo will do precisely what you want it to, rapidly and accurately, from wherever you are in your home. Of course, you might prefer the app of your favourite music streaming service - if that’s your preference, no problem. Evo will be just as responsive to your inputs and commands. Connectivity to Suit Your Needs Thanks to its suite of digital and analogue inputs, Evo is ready for you to add your favourite sources - a turntable, say, or a CD player - and build a wider system. Even video sources can join in. Just connect your TV’s HDMI ARC output to Evo’s ARC input and you'll be all set. No matter where your music’s coming from, Evo will make it sound its best. Bluetooth Convenience. HD Sound Quality Nothing’s easier or simpler than streaming via Bluetooth. Evo takes it to the max by using aptX HD Bluetooth - which is wireless, high-definition music streaming, with flawless transmission and incredibly realistic, convincing sound. Evo delivers all the wireless convenience you want, with none of the sonic compromises.

Get the most musical sound possible from this Master-tuned integrated amplifier. Its custom-designed HDAM delivers exquisite detail and unforgettable musicality from any style of music. Exquisite Sound Tuning MODEL 30 continues the renowned heritage of exquisite Marantz amplifiers. Tuned by the Marantz Sound Master who channeled his passion, experience, and extraordinary ear into the amplifier design. The Most Musical, Accurate, Detailed Sound MODEL 30 is built on its own discrete circuit board, the Hyper-Dynamic Amplifier Module, or HDAM. By custom-curating hundreds of individual parts, rather than adopting an off-the-shelf solution, the MODEL 30 HDAM significantly outperforms standard integrated circuits to create the unique musicality you always expect from Marantz. Marantz Musical Premium Phono EQ Envisioned to deliver optimal sound quality by simplifying the signal path – vital given the delicate nature of phono signals – the Phono EQ stage in MODEL 30 can be used with both moving magnet and low-output moving coil cartridges, thanks to a built-in MC head amplifier. MC / MM Phono Input Impedance Selector In order to optimize sound performance when using a moving coil (MC) or magnetic moving (MM) cartridge, and to accommodate all configurations as much as possible, MODEL 30 is equipped with an input impedance selector. The input impedance can be adjusted to three different settings: MC LOW (33 ohm), MC MID (100 ohm) and MC HIGH (390 ohm). Built For Generations Like its counterpart, the SACD 30n Streaming CD Player, the MODEL 30 Integrated Amplifier is designed to the highest standards. More Than 65 Years Of Audiophile Heritage Founded in 1953, Marantz has a long and rich history of designing audio components embraced by music lovers and critical listeners around the world. Because music matters, the MODEL 30 continues Marantz’s long tradition of delivering a best-in-class listening experience for music and cinema. Your music always sounds better on a Marantz. 

Get the most musical sound possible from this Master-tuned integrated amplifier. Its custom-designed HDAM delivers exquisite detail and unforgettable musicality from any style of music. Exquisite Sound Tuning MODEL 30 continues the renowned heritage of exquisite Marantz amplifiers. Tuned by the Marantz Sound Master who channeled his passion, experience, and extraordinary ear into the amplifier design. The Most Musical, Accurate, Detailed Sound MODEL 30 is built on its own discrete circuit board, the Hyper-Dynamic Amplifier Module, or HDAM. By custom-curating hundreds of individual parts, rather than adopting an off-the-shelf solution, the MODEL 30 HDAM significantly outperforms standard integrated circuits to create the unique musicality you always expect from Marantz. Marantz Musical Premium Phono EQ Envisioned to deliver optimal sound quality by simplifying the signal path – vital given the delicate nature of phono signals – the Phono EQ stage in MODEL 30 can be used with both moving magnet and low-output moving coil cartridges, thanks to a built-in MC head amplifier. MC / MM Phono Input Impedance Selector In order to optimize sound performance when using a moving coil (MC) or magnetic moving (MM) cartridge, and to accommodate all configurations as much as possible, MODEL 30 is equipped with an input impedance selector. The input impedance can be adjusted to three different settings: MC LOW (33 ohm), MC MID (100 ohm) and MC HIGH (390 ohm). Built For Generations Like its counterpart, the SACD 30n Streaming CD Player, the MODEL 30 Integrated Amplifier is designed to the highest standards. More Than 65 Years Of Audiophile Heritage Founded in 1953, Marantz has a long and rich history of designing audio components embraced by music lovers and critical listeners around the world. Because music matters, the MODEL 30 continues Marantz’s long tradition of delivering a best-in-class listening experience for music and cinema. Your music always sounds better on a Marantz. 

Balanced Power Amplification Drawing on design elements of the PM-10, the PM-12SE is built to leverage enhancements, maintain the purest possible sound and supply the power needed to drive the most demanding speakers. Current Feedback Amplifier Current Feedback amplification is a well-known, Marantz-original circuit technology, thoughtfully designed to match the expectations of your Hi-Res music for wide-bandwidth and ensured high-speed reproduction. Marantz HDAM Technology The result is a much more dynamic, accurate and detailed sound. Over the years, Marantz has developed different HDAM technology to fit the particular requirements of players and amplifiers. The PM-12SE uses the latest high-grade HDAM-SA3 technology, combined with optimized circuit design layout and carefully selected components, the PM-12SE ensures exceptional sound quality and performance. Marantz Musical Premium Phono EQ Designed to deliver optimal sound quality by simplifying the signal path, the Marantz Musical Premium Phono EQ stage in the PM-12SE amplifier can be used with both moving magnet and low-output moving coil cartridges. High Quality Volume Control Newly developed electric volume control uses the latest volume control IC to realize better channel separation, dynamic range and distortion-reduction, while retaining the operational feel of an analog volume control device. The amplifier employs new Marantz-designed electric volume control for high linearity and best-in-class channel separation.

Balanced Power Amplification Drawing on design elements of the PM-10, the PM-12SE is built to leverage enhancements, maintain the purest possible sound and supply the power needed to drive the most demanding speakers. Current Feedback Amplifier Current Feedback amplification is a well-known, Marantz-original circuit technology, thoughtfully designed to match the expectations of your Hi-Res music for wide-bandwidth and ensured high-speed reproduction. Marantz HDAM Technology The result is a much more dynamic, accurate and detailed sound. Over the years, Marantz has developed different HDAM technology to fit the particular requirements of players and amplifiers. The PM-12SE uses the latest high-grade HDAM-SA3 technology, combined with optimized circuit design layout and carefully selected components, the PM-12SE ensures exceptional sound quality and performance. Marantz Musical Premium Phono EQ Designed to deliver optimal sound quality by simplifying the signal path, the Marantz Musical Premium Phono EQ stage in the PM-12SE amplifier can be used with both moving magnet and low-output moving coil cartridges. High Quality Volume Control Newly developed electric volume control uses the latest volume control IC to realize better channel separation, dynamic range and distortion-reduction, while retaining the operational feel of an analog volume control device. The amplifier employs new Marantz-designed electric volume control for high linearity and best-in-class channel separation.

High-end hybrid valve receiver with powerful output stage and Bluetooth® aptX™ The Magnat MR 780 combines elegantly audiophile hi-fi sound with substantial power reserves: Used in the pre-amp stage are high-quality selected and extensively burnt-in ECC 81 valves, ensuring that well-loved, warm sound. The output stage relies on a low-emission toroidal transformer and provides an impressive 100 watts of RMS power per channel at 4 ohms. Added to this is a virtually overwhelming range of connection options for analogue and digital sources, including Bluetooth aptX. Where necessary, a high-quality Wolfson D/A converter takes care of the signal transformation with up to 192 kHz and 24 bits. A phono pre-amplifier for MM systems, an integrated DAB/DAB+ tuner as well as an FM receiver and a large number of further details make the MR 780 one of the best stereo receivers in this price category. This high standard is clear from the very first glimpse. You can see immediately from the full-metal enclosure with its solid, brushed aluminium front panel that this unit belongs in the high-end range. DIGITAL INPUTS USB 2.0, type B connector Supported sampling frequencies: 44.1/48/88.2/96/176.4/192kHz Supported bit depth: 16/24bits 1. optical (Toslink™) 2. coaxial (cinch) AMPLIFIER AND POWER SUPPLY Discrete high-performance amplifier Output power: 100 watts of sine power per channel (4 ohms) High-capacity filter/electrolytic capacitors Shielded toroidal transformer High-performance power supply with separately stabilised supply voltages for the different tubes and circuits Separate standby power supply for low power consumption in standby mode BLUETOOTH® INPUT Bluetooth® 4.0 / Qualcomm® aptX™ HIGHLIGHTS Readable, two-line clear text display with adjustable brightness (3 stages) System remote control for all functions CONNECTIONS Record Out fixed level output Headphone output with high quality 6.3 mm jack PREAMPLIFIER Additional 3.5 mm audio input on the front panel for connecting portable devices Digital inputs (2 x optical and 2 x coaxial) for sampling frequencies up to 192kHz/24bits USB Audio 2.0 input supports sampling frequencies up to 192kHz/24bits Bluetooth® input (4.0) supports the high-end audio standard Qualcomm® aptX™ Wolfson digital-to-analogue converter Low-noise tube preamplifier with 2 x ECC 81 tubes Preselected and burned-in tubes MM-phono preamplifier with low-noise operational amplifiers and subsonic filters CABINET Sturdy full-metal enclosure with solid, brushed aluminium front Stable feet with damping rubber insert Solid aluminium control elements

Stereo high-end hybrid integrated amplifier The combination of tube and transistor technology has a long tradition at Magnat. After all, it combines an optimum sound with an impressive performance. The MA 900 is no different. It scores highly with its impressive technical values, extensive configuration and optimum workmanship, as well as its minimalist design. Full-power performance - 200 watts x 2 While the selected and burned-in ECC 81 high-end tubes take care of amplifying the fine input signals and generate the inimitable tube sound, the power transistors ensure a solid continuous output of 200 watts of sine power per channel. The pulse power produced is an impressive 320 watts. 5 analogue low-level inputs and a 3.5 mm jack input at the front of the unit, as well as 4 digital inputs and a phono input for MM and MC systems, all guarantee connectivity for even the most extensive AV systems. Tablets, smartphones and computers can also be connected via Bluetooth with optimum sound quality thanks to the aptX HD standard. MAGNAT MA 900 – TRADITION MEETS MODERNITY The combination of melodious tubes in the preamplifier unit together with powerful transistors turns the MA 900 into a hybrid amplifier; a product category that is rare but has a long tradition at Magnat. The tubes, which have already been burned-in for a perfect sound, are selected prior to assembly to ensure that a pair with perfectly compatible values is used. A LOOK THAT WILL LAST FOREVER All of this is packed in a sturdy metal housing with a front panel and operating elements that are made of solid aluminum. Every touch is a pleasure. In addition, the unique concept of the MA 900 is visually emphasized by the individually selected designations lighting up in the clear dual line display on one side of the unit when selecting the input, and the tubes emitting their soft glow on the other. Of course, all of this can also be controlled with the system remote control that is supplied. DIGITAL INPUTS 1. optical (Toslink™) 2. coaxial (cinch) Supported bit depth: 16/24bits Supported sampling frequencies: 44.1/48/88.2/96/176.4/192kHz AMPLIFIER AND POWER SUPPLY Discrete Class A/B power amplifier Power output: 200 watts of sine power per channel at 4 ohms and 2 x 320 watts of maximum pulse power Elaborate mains adapter with separately stabilised supply voltage for the individual circuits High-capacity filter/electrolytic capacitors Shielded toroidal transformer Standby power supply for low power consumption in standby mode < 0,5 watts BLUETOOTH® INPUT Bluetooth® streaming (5.0) with the high-end audio standard Qualcomm® aptX™ HIGHLIGHTS Mono switch (for analog sources) Record Out fixed level output Headphone output with high-quality 6.3 mm jack socket Readable, two-line clear text display with adjustable brightness (3 stages) System remote control for all functions Solid aluminium controls Speaker terminal with solid, insulated screw terminals that are capable of accommodating large cable cross-sections Stable feet with damping rubber insert PREAMPLIFIER MM and MC phono preamplifier with ultra-low noise operational amplifiers from Texas Instruments incl. subsonic filter Five analogue low-level inputs Additional 3.5 mm audio input on the front panel for connecting portable devices Digital inputs (2 x optical and 2 x coaxial) for sampling frequencies up to 192kHz/24bits Bluetooth® input (5.0) supports the high-end audio standard Qualcomm aptX®HD Cyrrus Logic® digital-to-analogue converter SOURCE GAIN function allows the volume to be adjusted by +/- 6dB for every source SOURCE RENAME function allows you to freely specify the names of individual sources (14 digits) Low-noise tube preamplifier with 2 x ECC 81 tubes Preselected and burned-in tubes

A class A integrated tube amplifier which gives a superior sound quality foe pure audio lovers. As a class A amplifier Theseus requires high sensitivity loudspeakers to unfold its virtues. Theseus provides an MM tube phono stage, three line inputs and a USB DAC. Gold plated RCA connectors are implemented for the signal inputs/output and high quality binding posts for the loudspeakers. For the volume control the classic blue Alps is used. An elegant remote control in aluminum case offers you control over all the functions of Theseus integrated amplifier. Volume control, input selection and mute.Carefully selected values and types of the electronic components contribute to the reliable circuits operation and the high sound quality of the amplifier. The meticulous PCB design ensures excellent behavior in SNR, distortion and channel separation. Inner signal wiring with high quality shielded signal cable. Power wiring uses high quality copper cables of more-than-needed AWG gauge, to achieve low impedance power transfer. All power cables are twisted in pairs to minimize the electromagnetic interference.The handmade multilayer output transformers allow the amplifier to reveal the sound stage and all the music details through the entire audio spectrum to give you a unique audio experience. Made by us and tested thoroughly for quality and reliability. The same applies to the power transformer and the chokes.The positioning of the transformers and chokes is such that minimizes the magnetic coupling between power and output transformers.

Advance Paris, the French manufacturer of high fidelity presents the latest of its CLASSIC range designed for the demanding music lovers. This new integrated amplifier has numerous technical advantages. We thus confirm our desire to leave nothing to chance and optimize each of the modules that make up this integrated amplifier. We get a device with many possibilities, operated intuitively, thanks to an ergonomics that can reference, and above all flawless and blameless musicality, all offered at a very competitive price, compared to the huge potential of X- i1100. The X-i1100 has no less than six inputs, including a mobile magnet phono, an asymmetrical and symmetrical CD, a tuner, two auxiliaries and a direct «Amp ln» input. The digital inputs are also numerous: a USB, an AES, and six S / PDIF including four optics. The outputs have not been forgotten: one dedicated to asymmetrical line recording and one preamplifier output, in order to connect an additional power block to the X-i1100. The X-i1100 can drive any type of passive speaker with its efficient 220W per channel under 8Ω ( 400W under 4Ω €! ) Relying on a toroidal transformer of 700VA and 60000uF filtering capacity. The preamplification stage has been designed with switching relays as close as possible to the inputs.   The DAC has two digital signal receivers: an X-Mos processor and a USB3318 with jitter correction for the USB input and a Cirrus Logic CS8416 for all the others, AES and S / PDIF. The converter chosen, a Burr Brown PCM1796, handles signals up to 192 kHz under 24 bits. Metal film resistors and polypropylene capacitors contribute to the quality of reproduction of this integrated amplifier. Mounted on large heat sinks, the amplifier boards, connected to the output terminals by means of cables with a cross section of 4 mm2, have a triple push-pull per channel, thus three pairs of bipolar transistors NJW0281G and NJW0302G. The X-i1100 can operate up to 45 W in a mode similar to class A and switches to class AB beyond, when the «High Bias» switch located on the back of the device is activated. Mechanical engineering was also well designed: five compartments forming as many galvanic isolations and contributing to the rigidity of the X-i1100 are integrated into the chassis. Chassis made of steel with black aluminum sides as well as a perforated cover ensures optimum ventilation of the X-i1100.

The PlayStream A7 is a connected integrated amplifier. With a power of 2x115W / 8Ω in class AB, the A7 was designed with the ultimate goal of satisfying the demanding audiophile. Its sound reproduction is uncompromising, compatible with all new high definition sources. The A7 integrates an ethernet and wifi network player including many services like Spotify, Deezer, Qobuz, Tidal, TuneIn, iHeartRadio, vTuner, Napster, etc., it allows network playback of your music library stored on your smartphone, tablet, computer or network drive such as NAS (Synology). A DAB + digital tuner, an FM tuner, 4 digital inputs including a coaxial and 3 optical, a HDMI ARC, a USB input as well as 6 analog inputs including a configurable phono input equip the PlayStream A7. The PlayStream A7 is compatible with our Bluetooth compatible receivers X-FTB01 and new X-FTB02 incorporating high definition HD aptX. Equipped with High-Bias, the PlayStream A7 delivers sound comparable to Class A on the first watts. DLNA and Airplay compatible. To discover !

The PlayStream A5 is a connected integrated amplifier. With a power of 2x80W / 8Ω in class AB, the A5 was designed with the ultimate goal of satisfying the demanding audiophile. Its sound reproduction is uncompromising, compatible with all new high definition sources. The A5 integrates an ethernet and wifi network player including many services like Spotify, Deezer, Qobuz, Tidal, TuneIn, iHeartRadio, vTuner, Napster, etc., it allows network playback of your music library stored on your smartphone, tablet, computer or network drive such as NAS (Synology). A DAB + digital tuner, an FM tuner, 4 digital inputs including a coaxial and 3 optical, a USB input as well as 6 analog inputs including a configurable phono input equip the PlayStream A5. The PlayStream A5 is compatible with our new Bluetooth compatible receivers X-FTB01 and X-FTB02  incorporating high definition HD aptX. Equipped with High-Bias, the PlayStream A5 delivers sound comparable to Class A on the first watts. DLNA and Airplay compatible. To discover !

The Solo Uno brings total simplicity to the complex world of audio streaming by providing a compact, stylish and elegant streamer with a built-in amplifier. Boasting the class-leading Arcam sound quality, the effortless system requires just two speakers, the Solo Uno and a mobile device using the native music app of choice via Apple AirPlay2, Roon Ready, UPnP or Google Chromecast. In addition, the Solo Uno can be updated “over the air” automatically to provide enhanced future streaming features and years of listening enjoyment.

This newly-developed Marantz HD-AMP1 is a High-Class compact amplifier, with superb, elegant, classic looks. But don’t let that misguide you, its advanced switching amplifier technology blasts out an ear-splitting 70W at 4ohms, while its dual crystal clock and discrete DAC post filter with Marantz. HDAM-SA2 modules make standard counted sound feel as incredible as high-resolution audio. This new amp also gives you the unique Marantz Musical Digital Filtering (MMDF), with two selectable filter characteristics to cater for different tastes and music. Each handles even the minutest of detail with loving care within the digital audio signal. As today’s new media not only comes in 44.1kHz/16 bit resolution – similar to the CD format, Marantz developed the digital section to handle signals of up to 384kHz/32bit resolution and DSD 2.8MHz / 5.6MHz / 11.2MHz. Optical and coaxial digital inputs are ready to connect a TV or set-top box, and there is a USB-B port to stream music directly from your PC or MAC. iDevices can also be connected via the USB port on the front. To safeguard quality when connected to a computer, we built extended isolation around the USB-B input to eliminate the chance of high frequency noise generated by the computer entering the HD-AMP1. Information on volume, input, resolution, and more is shown on the stylish Marantz Porthole Display. While the solid aluminum front is supported by a double layer bottom plate and retro-style side panels. Welcome to the world of compact ecstasy.

This newly-developed Marantz HD-AMP1 is a High-Class compact amplifier, with superb, elegant, classic looks. But don’t let that misguide you, its advanced switching amplifier technology blasts out an ear-splitting 70W at 4ohms, while its dual crystal clock and discrete DAC post filter with Marantz. HDAM-SA2 modules make standard counted sound feel as incredible as high-resolution audio. This new amp also gives you the unique Marantz Musical Digital Filtering (MMDF), with two selectable filter characteristics to cater for different tastes and music. Each handles even the minutest of detail with loving care within the digital audio signal. As today’s new media not only comes in 44.1kHz/16 bit resolution – similar to the CD format, Marantz developed the digital section to handle signals of up to 384kHz/32bit resolution and DSD 2.8MHz / 5.6MHz / 11.2MHz. Optical and coaxial digital inputs are ready to connect a TV or set-top box, and there is a USB-B port to stream music directly from your PC or MAC. iDevices can also be connected via the USB port on the front. To safeguard quality when connected to a computer, we built extended isolation around the USB-B input to eliminate the chance of high frequency noise generated by the computer entering the HD-AMP1. Information on volume, input, resolution, and more is shown on the stylish Marantz Porthole Display. While the solid aluminum front is supported by a double layer bottom plate and retro-style side panels. Welcome to the world of compact ecstasy.

The RA-1592MKII delivers 200 Watts of Class AB output into 8 ohm speakers supporting your favorite analog, digital, XLR, aptXTM and AAC Bluetooth, PC-USB with MQA and Moving Magnet Phono stage inputs. The audiophile grade 32-bit/384kHz DAC and precisely tuned circuits delivers an unprecedented sound stage with exacting positioning. Whether a seasoned audiophile or casual listener, the time has never been better to be a music lover. A near limitless supply of music is at our fingertips accessible via streaming, digital mediums, classic vinyl and more.  Rotel has been designing and manufacturing high fidelity, high quality, high performance audio products for over 60 years accurately rendering audio with exceptional detail and stunning clarity. The RA-1592MKII proudly continues in the tradition and heritage of this iconic brand. The RA-1592MKII Integrated Amplifier includes circuit design innovations, optimization of audio signal paths and updates to critical power supply components delivering a breathtaking performance with dynamic rhythm and timing.  Utilizing Rotel’s best-in-class preamplifier topology and awardwinning power amplifier technology, the RA-1592MKII is a nocompromise, size-efficient, all-in-one integrated audio product. The RA-1592MKII delivers 200 Watts per channel into 8 ohms powered by Rotel’s in-house manufactured toroidal transformer feeding an array of slit-foil capacitors for rich, deep, controlled, bass energy. The RA-1592MKII supports your favorite sources including Analog, XLR, Digital, aptX™ and AAC wireless Bluetooth, PC-USB supporting MQA and 32-bit/384kHz PCM, and Moving Magnet Phono stage. Digital to Analog conversion utilizes a Texas Instruments premium DAC with precisely tuned output filter circuits delivering unprecedented acoustic detail, wide sound stage and exacting positioning.  The RA-1592KII is certified Roon Tested delivering the best experience using Roon software so you can just enjoy the music. Selectable A-B speaker outputs, RS232, Ethernet and 12V triggers ensure seamless integration with control systems.  Convenience, performance and value - the RA-1592MKII delivers.

The RA-1592MKII delivers 200 Watts of Class AB output into 8 ohm speakers supporting your favorite analog, digital, XLR, aptXTM and AAC Bluetooth, PC-USB with MQA and Moving Magnet Phono stage inputs. The audiophile grade 32-bit/384kHz DAC and precisely tuned circuits delivers an unprecedented sound stage with exacting positioning. Whether a seasoned audiophile or casual listener, the time has never been better to be a music lover. A near limitless supply of music is at our fingertips accessible via streaming, digital mediums, classic vinyl and more.  Rotel has been designing and manufacturing high fidelity, high quality, high performance audio products for over 60 years accurately rendering audio with exceptional detail and stunning clarity. The RA-1592MKII proudly continues in the tradition and heritage of this iconic brand. The RA-1592MKII Integrated Amplifier includes circuit design innovations, optimization of audio signal paths and updates to critical power supply components delivering a breathtaking performance with dynamic rhythm and timing.  Utilizing Rotel’s best-in-class preamplifier topology and awardwinning power amplifier technology, the RA-1592MKII is a nocompromise, size-efficient, all-in-one integrated audio product. The RA-1592MKII delivers 200 Watts per channel into 8 ohms powered by Rotel’s in-house manufactured toroidal transformer feeding an array of slit-foil capacitors for rich, deep, controlled, bass energy. The RA-1592MKII supports your favorite sources including Analog, XLR, Digital, aptX™ and AAC wireless Bluetooth, PC-USB supporting MQA and 32-bit/384kHz PCM, and Moving Magnet Phono stage. Digital to Analog conversion utilizes a Texas Instruments premium DAC with precisely tuned output filter circuits delivering unprecedented acoustic detail, wide sound stage and exacting positioning.  The RA-1592KII is certified Roon Tested delivering the best experience using Roon software so you can just enjoy the music. Selectable A-B speaker outputs, RS232, Ethernet and 12V triggers ensure seamless integration with control systems.  Convenience, performance and value - the RA-1592MKII delivers.

Rated power output: 75W per channel / 4 ohms at THD 1% 60W per channel / 4 ohms at THD 0,015 and 20Hz-20kHz 45W per channel / 8 ohms at THD 1% 35W per channel / 8 ohms at THD 0,015 and 20Hz-20kHz Dynamic peak power: 135W per channel / 4 ohms 80W per channel / 8 ohms Frequency response: 2Hz - 200kHz (-3dB) at 15W 2Hz - 100kHz (-3dB) at maximum power Signal-to-noise ratio: >90dB at 1W >105dB at 60W Voltage and power consumption: AC220-240V / 50Hz Dimensions (WxDxH): 440 x 330 x 85mm Weight: 11,6Kg

It easily drives a pair of passive speakers and allows to stream any music via Bluetooth or Wi-Fi from any platform or from your storedmusic files. The Connect 250 is particularly suitable for integration in any environment, damp or not, thanks to its two mounting brackets. Then itcan be placed against a wall or under a false ceiling. The remote infrared cable, supplied, facilitates its integration. Thanks to Elipson BT App (Androïd and iOS) you can rename each Connect 250 device that appears on your Bluetooth network.It is perfectly compatible with the other products of the ELIPSON CONNECT range, for multi-room use.

Integrated Amplifier with Digital Connectivity The PM6007 delivers Marantz’ most musical sound and is an ideal choice for those ready to take the next step in their 2-channel Hi-Fi system. Powered by a Toroidal power transformer and customized block capacitors, the PM6007 integrated amplifier delivers 45 watts (8ohm, 20Hz-20kHz) of power-per-channel. You can easily connect both analogue and digital sources or connect your turntable to the built-in phono pre-amplifier. Listen to your favourite Hi-Res audio content through the 192-kHz/24-bit D/A converter and experience enhanced bass with a subwoofer-out option. Current Feedback Amplifier The Current Feedback Amplifier technology provides wide-bandwidth and high-speed sound reproduction. In combination with the high current power supply, the PM6007's amplifier section holds a large energy reserve to easily drive even the most demanding speakers. An advanced thermal compensation avoids memory distortion for clean amplification under any circumstances. Reference Quality D/A Conversion for Digital Input The PM6007 features a new Hi-Res D/A conversion. It is equipped with a reference class AK4490 D/A converter, which provides up to 192-kHz/24-bit resolution for optimum fidelity with your Hi-Res audio file types. High Current Power Supply The power supply supports high current, high speed Shottky Barrier Diodes and high current storage capacitors fed by a Toroidal Transformer that together provide wide dynamic range and low impedance drive capability. Toroidal Transformer A Toroidal Transformer has several advantages over a normal EI core transformer. The highly efficient design delivers more power compared to the same size EI core transformer. In addition, the shape of the Toroidal Transformer delivers low electromagnetic radiation and mechanical vibration for better sound quality. Marantz HDAM-SA3 Technology Marantz has developed our own discrete circuit boards to replace standard IC's. These HDAM's (Hyper Dynamic Amplifier Module) consist of discrete surface mount components with short mirror image L/R signal paths. These devices do exactly the same thing as the Op-amps, but outperform these solutions dramatically in terms of the Slew Rate and reduced noise level, resulting in more dynamic, accurate and detailed sound. In the PM6007, the HDAM-SA3 circuit improves on its previous module and the idling current stability is less influenced by power transistor temperatures to maintain sound performance even at high level output. Expanded Connectivity for Digital Inputs (2 Optical, 1 Coax) with Hi-Res Audio Support One Coaxial digital and two Optical digital inputs are now available to connect digital devices and play back Hi-Res audio (up to 192-kHz/24-bit PCM) through the PM6007's advanced audio circuitry. The complete digital section is fully shielded by an extra metal housing unit to ensure that the digital stage has no effect on the analogue signal. Digital Filter for Optical/Coaxial input The PM6007 introduces a new digital filter for Optical and Coaxial inputs. This two-mode filter (Filter1/Filter2) allows optimized reproduction of digital music content using the new AK4490 D/A converter to your taste. Filter 1 is a slow roll-off preset that improves deep stereo imaging and Filter 2 is a sharp roll-off filter for more precise imaging reproduction. Subwoofer Output The PM6007 supports an optional external subwoofer with a fixed low pass cut off frequency at 150Hz. Enjoy accurate bass with no audible peaks or dips, no matter where you place your subwoofer. Improved Integrated Phono Input Marantz integrated amplifiers have historically featured high-quality phono stages. The PM6007 remains faithful to that legacy, leveraging the newly designed circuit introduced with the PM7000N — one that integrates a FET (field-effect transistors) in the input stage. This technology delivers high input impedance, eliminates the need for AC coupling capacitors, simplifies the signal path, and lowers distortion and noise which vastly improves the overall signal purity. Audio-Grade Sound Parts Marantz maintains a steadfast reputation for choosing the best possible components for its Hi-Fi products, and the PM6007 is built with that same performance-first Hi-Fi approach. Marantz engineers selected and improved the PM6007 versus the previous PM6006 through extensive listening in dedicated Marantz facilities in Europe and Japan using Hi-Fi tuned sound parts. For example, increasing the size of the power supply capacitors by 20% improved stability during high demand listening sessions. The Most Musical Sound Engineered and extensively tuned by a team drawing on more than 65 years of Hi-Fi expertise, the PM6007 provides exceptional performance for your audio collection. Whether digital or analog, enjoy the most musical sound from any source. Key Features: Take your next step in Hi-Fi: The PM6007 integrated current feedback amplifier powers 2x 45W (8 ohms RMS, 20Hz – 20kHz) to offer a refined audio experience. Meticulously and masterfully tuned: During the extensive tuning process, Marantz sound masters carefully refine and curate each component for optimal performance. Wide range of connectivity: Experience Hi-Res audio files exactly as intended through the gold-plated inputs: 5 analogue inputs, one coaxial input and two optical digital inputs. An updated audio experience: The newly updated, high-quality DAC AK4490 offers a richer sound for your enjoyment. Digital filter modes for Optical/Coaxial input: Listen to a more refined audio experience to fit your taste with the new digital filter mode feature. Built to perform: In addition to high-quality speaker terminals with A/B switching capability, a fully-shielded DAC unit, and copper screws, the rigid feet provide a true-to-performance sound. Marantz proprietary HDAM-SA3 circuit: You will experience a wider dynamic range with lower distortion for the output stage. Advanced thermal compensation: No memory distortion for clean and precise audio reproduction even after powerful bass attacks. Customized components for a more refined sound: The Toroidal Transformer and high-quality, customized components deliver exceptional sound quality. Integrated phono input: Featuring a high-quality MM phono pre-amp with FET input to enjoy best signal purity and sound from your favourite vinyl. Deeper bass with a subwoofer output: Enjoy powerful bass by adding a subwoofer, companion bookshelf speakers or even further extend bass with the addition of floor standing speakers. Available in black or silver-gold

Integrated Amplifier with Digital Connectivity The PM6007 delivers Marantz’ most musical sound and is an ideal choice for those ready to take the next step in their 2-channel Hi-Fi system. Powered by a Toroidal power transformer and customized block capacitors, the PM6007 integrated amplifier delivers 45 watts (8ohm, 20Hz-20kHz) of power-per-channel. You can easily connect both analogue and digital sources or connect your turntable to the built-in phono pre-amplifier. Listen to your favourite Hi-Res audio content through the 192-kHz/24-bit D/A converter and experience enhanced bass with a subwoofer-out option. Current Feedback Amplifier The Current Feedback Amplifier technology provides wide-bandwidth and high-speed sound reproduction. In combination with the high current power supply, the PM6007's amplifier section holds a large energy reserve to easily drive even the most demanding speakers. An advanced thermal compensation avoids memory distortion for clean amplification under any circumstances. Reference Quality D/A Conversion for Digital Input The PM6007 features a new Hi-Res D/A conversion. It is equipped with a reference class AK4490 D/A converter, which provides up to 192-kHz/24-bit resolution for optimum fidelity with your Hi-Res audio file types. High Current Power Supply The power supply supports high current, high speed Shottky Barrier Diodes and high current storage capacitors fed by a Toroidal Transformer that together provide wide dynamic range and low impedance drive capability. Toroidal Transformer A Toroidal Transformer has several advantages over a normal EI core transformer. The highly efficient design delivers more power compared to the same size EI core transformer. In addition, the shape of the Toroidal Transformer delivers low electromagnetic radiation and mechanical vibration for better sound quality. Marantz HDAM-SA3 Technology Marantz has developed our own discrete circuit boards to replace standard IC's. These HDAM's (Hyper Dynamic Amplifier Module) consist of discrete surface mount components with short mirror image L/R signal paths. These devices do exactly the same thing as the Op-amps, but outperform these solutions dramatically in terms of the Slew Rate and reduced noise level, resulting in more dynamic, accurate and detailed sound. In the PM6007, the HDAM-SA3 circuit improves on its previous module and the idling current stability is less influenced by power transistor temperatures to maintain sound performance even at high level output. Expanded Connectivity for Digital Inputs (2 Optical, 1 Coax) with Hi-Res Audio Support One Coaxial digital and two Optical digital inputs are now available to connect digital devices and play back Hi-Res audio (up to 192-kHz/24-bit PCM) through the PM6007's advanced audio circuitry. The complete digital section is fully shielded by an extra metal housing unit to ensure that the digital stage has no effect on the analogue signal. Digital Filter for Optical/Coaxial input The PM6007 introduces a new digital filter for Optical and Coaxial inputs. This two-mode filter (Filter1/Filter2) allows optimized reproduction of digital music content using the new AK4490 D/A converter to your taste. Filter 1 is a slow roll-off preset that improves deep stereo imaging and Filter 2 is a sharp roll-off filter for more precise imaging reproduction. Subwoofer Output The PM6007 supports an optional external subwoofer with a fixed low pass cut off frequency at 150Hz. Enjoy accurate bass with no audible peaks or dips, no matter where you place your subwoofer. Improved Integrated Phono Input Marantz integrated amplifiers have historically featured high-quality phono stages. The PM6007 remains faithful to that legacy, leveraging the newly designed circuit introduced with the PM7000N — one that integrates a FET (field-effect transistors) in the input stage. This technology delivers high input impedance, eliminates the need for AC coupling capacitors, simplifies the signal path, and lowers distortion and noise which vastly improves the overall signal purity. Audio-Grade Sound Parts Marantz maintains a steadfast reputation for choosing the best possible components for its Hi-Fi products, and the PM6007 is built with that same performance-first Hi-Fi approach. Marantz engineers selected and improved the PM6007 versus the previous PM6006 through extensive listening in dedicated Marantz facilities in Europe and Japan using Hi-Fi tuned sound parts. For example, increasing the size of the power supply capacitors by 20% improved stability during high demand listening sessions. The Most Musical Sound Engineered and extensively tuned by a team drawing on more than 65 years of Hi-Fi expertise, the PM6007 provides exceptional performance for your audio collection. Whether digital or analog, enjoy the most musical sound from any source. Key Features: Take your next step in Hi-Fi: The PM6007 integrated current feedback amplifier powers 2x 45W (8 ohms RMS, 20Hz – 20kHz) to offer a refined audio experience. Meticulously and masterfully tuned: During the extensive tuning process, Marantz sound masters carefully refine and curate each component for optimal performance. Wide range of connectivity: Experience Hi-Res audio files exactly as intended through the gold-plated inputs: 5 analogue inputs, one coaxial input and two optical digital inputs. An updated audio experience: The newly updated, high-quality DAC AK4490 offers a richer sound for your enjoyment. Digital filter modes for Optical/Coaxial input: Listen to a more refined audio experience to fit your taste with the new digital filter mode feature. Built to perform: In addition to high-quality speaker terminals with A/B switching capability, a fully-shielded DAC unit, and copper screws, the rigid feet provide a true-to-performance sound. Marantz proprietary HDAM-SA3 circuit: You will experience a wider dynamic range with lower distortion for the output stage. Advanced thermal compensation: No memory distortion for clean and precise audio reproduction even after powerful bass attacks. Customized components for a more refined sound: The Toroidal Transformer and high-quality, customized components deliver exceptional sound quality. Integrated phono input: Featuring a high-quality MM phono pre-amp with FET input to enjoy best signal purity and sound from your favourite vinyl. Deeper bass with a subwoofer output: Enjoy powerful bass by adding a subwoofer, companion bookshelf speakers or even further extend bass with the addition of floor standing speakers. Available in black or silver-gold

The A10 is a 40-watt per channel integrated amplifier that will satisfy the audio purist who doesn’t require high power output or digital streaming capability. Its straightforward operation is refreshing and its performance is a pleasure to listen to. If you are considering taking your first step into a true hi-fi system or are seeking a small, high quality audio system for another living space, you can’t do better than the A10 integrated amplifier. The A10 is all about maximum performance for the price. Its design strips away added features that increase the overall cost and can detract from your musical enjoyment. Simple to operate and a pleasure to listen to, the A10 has connectivity for all your listening sources including an analogue media input (3.5mm mini-jack) for iOS devices or other media players, a CD input, a MM phono input in case your taste runs to classic LPs, a Tuner input to listen to your favourite radio stations and two Aux inputs for other analogue source devices. Specifications: DIMENSIONS (W × H × D): 430 × 72 × 342mm, 17" × 2.9" × 13.5" FRONT PANEL HEIGHT: 60mm (2.36") POWER REQUIREMENTS: 120V, 60Hz POWER CONSUMPTION: 220W NET WEIGHT: 5.9kg (13lbs.) BTU RATING (4Ω, 1/8th power): 311 BTU/h CONTINUOUS POWER OUTPUT: 40W/Ch (All channels driven, 8Ω) TOTAL HARMONIC DISTORTION (THD): (20Hz–20kHz)

Nostalgic Hi-Fi design. Today’s Hi-Fi technology. A nod to the past with the latest technology for a purely music sound. EMOTION Music spawns from something emotional. A unique, personal story an artist wishes to share. Understanding how music is created, and indeed helping artists to create, embeds in Yamaha’s DNA a fundamental understanding of music, particularly the emotion upon which music creation is inspired. In the development of each of our extensive range of Hi-Fi products, conveying this emotion to the listener is one of the most important considerations. OPENNESS Authentic, pure Hi-Fi is less about listening to brilliant sounding equipment and more about that equipment disappearing and the artist performing live in the room. The openness of the music, that feeling of being within reach of the artist, brings the music to the fore, and makes listening to music an active rather than passive experience. GROOVE Feeling the music. Not just feeling like you are there, but feeling the story in the music. Feeling the rhythm, the groove of the music. Moving with the music. Only a true representation of the music can deliver this.

Nostalgic Hi-Fi design. Today’s Hi-Fi technology. A nod to the past with the latest technology for a purely music sound. EMOTION Music spawns from something emotional. A unique, personal story an artist wishes to share. Understanding how music is created, and indeed helping artists to create, embeds in Yamaha’s DNA a fundamental understanding of music, particularly the emotion upon which music creation is inspired. In the development of each of our extensive range of Hi-Fi products, conveying this emotion to the listener is one of the most important considerations. OPENNESS Authentic, pure Hi-Fi is less about listening to brilliant sounding equipment and more about that equipment disappearing and the artist performing live in the room. The openness of the music, that feeling of being within reach of the artist, brings the music to the fore, and makes listening to music an active rather than passive experience. GROOVE Feeling the music. Not just feeling like you are there, but feeling the story in the music. Feeling the rhythm, the groove of the music. Moving with the music. Only a true representation of the music can deliver this.

Nostalgic Hi-Fi design. Today’s Hi-Fi technology. A nod to the past with the latest technology for a purely music sound. EMOTION Music spawns from something emotional. A unique, personal story an artist wishes to share. Understanding how music is created, and indeed helping artists to create, embeds in Yamaha’s DNA a fundamental understanding of music, particularly the emotion upon which music creation is inspired. In the development of each of our extensive range of Hi-Fi products, conveying this emotion to the listener is one of the most important considerations. OPENNESS Authentic, pure Hi-Fi is less about listening to brilliant sounding equipment and more about that equipment disappearing and the artist performing live in the room. The openness of the music, that feeling of being within reach of the artist, brings the music to the fore, and makes listening to music an active rather than passive experience. GROOVE Feeling the music. Not just feeling like you are there, but feeling the story in the music. Feeling the rhythm, the groove of the music. Moving with the music. Only a true representation of the music can deliver this.

Integrated Stereo Amplifier with HEOS Built-in Discover the PM7000N, the first Marantz Current Feedback integrated Hi-Fi amplifier with HEOS Built-in technology. The ideal choice for audio connoisseurs, the PM7000N includes high-grade audio components, Marantz own HDAMs, a toroidal transformer and a high-speed instantaneous current power supply. Stream your favourite music and enjoy high-resolution digital audio files up to 192kHz/24bit or DSD5.6. Switch to the high quality Phono MM input to listen to your beloved vinyls as never before. The digital inputs support PCM audio, and decode - beside MP3 - lossless digital files like ALAC, FLAC and WAV up to 24-bit/192-kHz for high-resolution listening. USB-A and HEOS Built-in additionally support DSD 2.8MHz and 5.6MHz playback. Stream your favourite music wirelessly via AirPlay2 and Bluetooth, and control the amplifier via the HEOS app or with leading voice agents Apple Siri, Google Assistant and Amazon Alexa where supported. Modern Integrated Amplifier The PM7000N is the first fully discrete, current feedback integrated Hi-Fi amplifier with HEOS Built-in technology for network music access from Marantz. It is the ideal choice for audio connoisseurs that require Marantz Musical sound with flexible operation and access to digital streaming music. The amplifier delivers a powerful 2x 60W into 8 ohm or 2 x 80W into 4 ohm (20Hz – 20kHz). The Most Musical Sound Engineered and extensively tuned by a team drawing on more than 65 years of Hi-Fi expertise, the PM7000N provides exceptional performance for your audio collection. Whether digital or analogue, enjoy the most musical sound from any source. Fully Discrete Current Feedback Power Amplifier with HDAM-S3 Current Feedback amplification, a renowned Marantz-proprietary circuit technology, is thoughtfully designed to match the requirements of high resolution music for wide-bandwidth and high-speed audio reproduction. The impedance at the Current Feedback point is minimized, generating a very low ground potential. Marantz Current Feedback amplifiers reduce the need for phase compensation by minimizing Negative Feedback (NFB). This simplifies the signal path and results in a high through-rate, excellent transient response and superb sonic transparency across the full bandwidth. Unlike conventional Voltage Feedback topology, Current Feedback renders the power amplifier nearly immune to difficult loudspeaker loads. Marantz HDAM-SA3 Technology Marantz developed its own discrete circuit boards called Hyper-Dynamic Amplifier Modules, or HDAMs, to replace the chip-based amps used elsewhere. Using discrete surface mount components with short mirror-image left and right signal paths, HDAMs outperform the regular integrated Op-amps dramatically in Slew Rate and noise level. The result is much more dynamic, accurate and detailed sound. Over the years, Marantz developed different HDAMs to fit the particular requirements of each player and amplifier. The PM7000N uses the high-grade SA3 version. High-Grade Sound Parts Marantz has a steadfast reputation for choosing the best-possible components for its Hi-Fi products, and the PM7000N is built with that same performance-first Hi-Fi approach. Marantz engineers selected and optimized the PM7000N through extensive listening in dedicated Marantz facilities in Europe and Japan using Hi-Fi tuned sound parts. Wide Range of Connectivity The PM7000N is equipped with 4 analogue inputs and one analogue output, plus a high quality Phone MM equalizer and features one coaxial and two optical digital inputs, along with a USB-A input for high resolution audio files. Hi-Res Audio Support With the ability to decode hi-res audio ALAC, FLAC and WAV lossless files up to 24-bit/192-kHz, as well as DSD 2.8MHz and 5.6MHz tracks (the audiophile format of SACD), enjoy music exactly as the artist intended. Listen to your music via the rear panel USB port or over network sources. Improved Integrated Phono Input For a long time, Marantz integrated amplifiers have featured high-quality phono stages. The PM7000N remains faithful to that legacy while also introducing a new design — one that integrates a FET (field-effect transistors) in the input stage. This provides high input impedance, eliminates the need for AC coupling capacitors and simplifies the signal path, lowering distortion and noise vastly improving the signal purity overall. Subwoofer Output Supports an optional external subwoofer with adjustable low pass crossover for low-frequency bass response within your listening environment. Enjoy accurate bass with no audible peaks or dips, no matter where you place your subwoofer. High Quality, Original Marantz SPKT-1+ Speaker Terminals The speaker terminals of the PM7000N are made of dense brass with a thick silver plating to provide best possible contact with speaker cables. Toroidal Transformer A Toroidal transformer offers several advantages that derive from its efficiency and power capability. The shape of it lends to low levels of electromagnetic radiation and mechanical vibration, producing improved sound quality over what you might experience with dated transformer models. Separate Power Supply for Stand-by In order to reduce power consumption in stand-by, the PM7000N features dual separate power supply circuits. While in standby the digital SMPS power supply is active so the network can wake up the PM7000N. When switching to operation mode, the SMPS power is switched off and the toroidal transformer is activated to supply the necessary high-current to reproduce the Marantz sonic signature. HEOS Built-in With HEOS Built-in technology, enjoy your favourite music in any room of your home for a wireless, whole-home audio experience. Play the same song in every room or select a different song for each connected room — the choice is yours. Enjoy music from Spotify Free or Premium, Amazon Music, Deezer, Tidal and more or your local music file libraries. With additional HEOS Built-in components, like HEOS-capable speakers, play all your music in one room or many. AirPlay 2 + Apple Siri Voice Control Stream audio from your favourite music services like Apple Music and Spotify or watch videos from services like YouTube and Netflix from any iPhone, iPad, Mac or Apple TV. Hear the audio perfectly synced to your speakers from AirPlay 2 sources.  For multi-room audio, wirelessly stream content to multiple AirPlay 2 compatible devices simultaneously with improved audio buffering to ensure smooth audio playback. AirPlay 2 provides control and grouping of compatible audio devices within the Apple Music or Home app. Use AirPlay 2 in-app or with your voice via Siri. Amazon Alexa Voice Control Use your voice to stream your favourite music services through Alexa with HEOS Built-in. Ask Alexa to play music from Amazon Music and more. Turn volume up or down, pause, mute and play the next song — all with your voice. To start streaming with Alexa voice commands, open the Alexa app and select “Skills.” Add HEOS Home Entertainment to enable. Then, go to Smart Home in the Alexa app menu and choose Devices and Discover or say “Alexa, discover my devices.” Google Assistant Voice Control Ask your Google Home, Google app or other devices with Google Assistant built-in to control content across your listening environment. Start music in the HEOS app, then ask your Google Assistant to control volume, play, pause, skip tracks and more. Key Features Power to suit your audio preference: 2ch fully discrete current feedback integrated Hi-Fi amplifier; 60W per channel (8-ohm, 20Hz – 20kHz)  Marantz proprietary HDAM-SA3 circuit: Wide dynamic range and famous Marantz soundstage  Shielded toroidal transformer: Delivering high level of clean power for pure amplification without distortion  Built-in Bluetooth and Wi-Fi with 2.4GHz/5GHz dual band support: Improved network stability even in Wi-Fi crowded homes  HEOS Built-in wireless music streaming: Play nearly unlimited music from your favourite streaming services like Spotify Free and Premium, Amazon Music, Deezer, TuneIn Internet Radio and more with the comfortable HEOS app  Wide range of connectivity: Four analogue inputs, one analogue output, one coaxial input, two optical digital inputs and one USB-A for high resolution audio files  High-performance, high-resolution audio playback: Supports high-resolution audio ALAC, FLAC and WAV lossless files up to 24-bit/192-kHz — plus, DSD 2.8MHz and 5.6MHz tracks for high-resolution listening supported by a high performance audio DAC AK4490  Play vinyl with exceptional clarity: Integrated phono input with newly design FET input stage to improve signal purity and improve sound  Fully shielded digital and network section with the option to deactivate: Minimises the risk of interference by digital section to achieve highest audio performance and a pure analogue experience Premium Marantz SPKT-1+ speaker terminals: Improved connection to speakers for high quality playback Speak your commands: Supports Amazon Alexa, Google Assistant and Apple Siri voice agents for seamless voice control  Works with your TV remote: Program the PM7000N to work with your TV remote and easily adjust volume up, volume down, mute and source selection