Ενισχυτές Stereo Ολοκληρωμένοι

JENO Engine (Jitter Elimination and Noise-shaping Optimization) In order to faithfully transmit the massive amount of audio data sent to the speakers without loss, the SU-G700M2 power amp section uses full digital amplification employing the JENO Engine, based on the design concept of reference systems. In order to solve the issue of sound quality degradation due to jitter, which poses problems for conventional digital amplifiers, the SU-G700M2 has an original jitter reduction circuit that eliminates jitter over the entire audible frequency range. Also, a unique, high-precision PWM (Pulse Width Modulation) conversion circuit is used for PWM conversion, which is important for sound quality. By optimising items such as the noise-shaping speed, degree, and quantization number through our unique expertise, data even in the wide dynamic range contained in high-resolution sound sources is converted to PWM signals without loss. These technologies provide reproduction of natural and finely detailed sound, enabling perception even of delicate music nuances. LAPC (Load Adaptive Phase Calibration) Speaker impedance changes with each frequency and a power amplifier is required to drive speakers without being affected by the speaker’s characteristics. However, conventional digital amplifiers are connected to speakers through a low-pass filter at the output stage, so they are even more strongly affected by the speaker impedance characteristics. Also, although the amplitude characteristics of conventional amplifiers due to negative feedback were improved, the phase characteristics could not be enhanced. We thus developed a speaker impedance adaptive optimisation algorithm that performs correction to the ideal impulse response through digital signal processing by measuring the frequency amplitude-phase characteristics of the amplifier with the speakers connected. This new technique enables flattening the frequency characteristics of amplitude and phase, which had previously not been achieved by amplifiers, as well as delivering a sound with rich spatial expression. Advanced Speed Silent Power Supply The power supply technology incorporated in the reference-class model SU-R1000 has been employed for improved speaker drive power and a greater feel of energy. The switching frequency has been increased from the conventional 100kHz band to the 400kHz band to ensure stable supply of voltage and current and to reduce adverse effects of modulation noise on the audio quality. The device is equipped with the same GaN FET and SiC SBD as those mounted in the SU-R1000 to deliver maximum performance from the high-speed switching power supply system. What’s more, a Super Low Noise Regulator is provided in the later stage. It prevents the decrease of regulation due to fixed switching frequency and impedes the mixing of noise component into high frequencies. The result is a low-noise and high-response power supply that maximises the performance of the digital amplifier. Three-section Configuration In integrated amplifiers there are a variety of circuits, including circuits that handle the micro-signals of inputs and those that handle a large current, such as output circuits and power-supply circuits. The SU-G700M2 uses a three-section construction with partitions installed between the circuit blocks according to the signal level handled. This eliminates interference between circuit blocks, thus achieving clear sound quality. In addition to the three-section construction, the SU-G700M2 comes with a bottom chassis featuring a two-layer construction with 1.2-mm-thick and 2-mm-thick steel plates, a top panel made of a 1.6-mm-thick steel plate and a 7-mm-thick aluminium front panel for improved vibration damping. Low-noise PHONO Input PHONO MC input is now supported. The PHONO input achieves low noise by using a differential parallel connection configuration of a first-stage, low-noise FET. In addition, four-level gain adjustment enables selection of the best gain according to the cartridge output. This enables optimal playback of high-grade analogue recorded sound sources tailored to the user’s environment. Class AA Headphone Amplifier The SU-G700M2 uses a Class AA headphone amplifier with separate amplifier circuits for voltage amplification and current amplification of the audio signal. The voltage is amplified by a high-grade operational amplifier, the current is amplified by an operational amplifier with high current-supply capability, and the high-grade PWM signal output from the JENO Engine is converted to analogue with high precision, thus enabling headphones to be ideally driven. This makes it possible to reproduce music with low distortion and a wide frequency range no matter what the load impedance of the headphones is.

JENO Engine Jitter is a major cause of distortion in digital systems, and is caused by mis-timing in the master clocks used in digital-to-analogue conversion. To eliminate the degradation of sound caused by jitter, Technics has developed an original jitter reduction circuit, comprising a clock generator in the noise-shaping system to reduce jitter in the low-frequency range and a high-precision sample rate converter for suppressing jitter in the high-frequency range. Thus it reduces jitter in an ideal way over the entire frequency range. This works with original high-precision PWM (Pulse Width Modulation) conversion circuit, optimising the noise-shaping speed, the degree and re-quantisation number, and the PWM gradation, in order to convert high-resolution signals to PWM without causing any damage to the dynamic range. These technologies enable Technics digital amplifier designs to reproduce the natural and delicate nuances of music. ADCT (Active Distortion Cancelling Technology) The Active Distortion Cancelling Technology newly developed by Technics accurately extracts and removes distortion in the power output stage which is generated by the speaker’s counter electromotive force and voltage drops. In the Hi-Fi audio market where an unlimited number of audio systems can be configured by combining various products, high-end audio amplifiers need to optimally drive a diversity of speakers. The Active Distortion Cancelling Technology accurately extracts distortion by determining the difference between the speaker terminal output and JENO output and then applies correction to the output digital signal, thus correcting the conventional digital amp system. This provides powerful speaker driving force and acoustic energy while offering the superior benefits of a digital amplifier, such as low noise, precise sound image and expansive sound ambience, regardless of the types of connected speakers. Advanced Speed Silent Power Supply The SU-R1000 uses a switching power supply system to ensure a stable supply of voltage and current required by the digital amp. In a conventional switching power supply system, the ON time of the switching operation was controlled in order to stabilise the voltage, and this causes the switching frequency to fluctuate according to the load, resulting in a modulation noise to affect the sound quality. The Advanced Speed Silent Power Supply has eliminated this noise by fixing the switching frequency in the 400kHz band. Furthermore, a Super Low Noise Regulator is provided in the later stage. This prevents the decrease of regulation resulting from the fixed switching frequency and impedes the mixing of noise component into high frequencies. The result is a high-response power supply that results in the best performance from the digital amplifier. Four Independent Power Supply Units In the SU-R1000, every element comprising the power supply has been diligently studied and revised for higher sound quality. What’s more, four independent power supply units are provided for different circuit blocks for further enhancement of sound quality. Since the SU-R1000 is an integrated amplifier, the internal circuits consist of a pre-amp stage and power amp stage in a mix of analogue and digital circuits. The Phono-EQ section which processes minute analogue signals is particularly susceptible to the effect of noise transmitted through the power supply line. The SU-R1000 uses separate power supply units for the analogue circuits and digital circuits in the pre-amp stage. It also uses separate power supply units for the right and left channels in the power amp stage that requires large electrical power. With the four independent power supply units, the SU-R1000 prevents power-line-induced interference among the circuit blocks and realises a high S/N ratio and superb separation. High-grade Digital/Analog I/O Circuit The phono input section and analogue input section feature a full-discrete circuit design. Technics has realised an ideal, symmetrical circuit layout and performed meticulous tuning. The new circuits prevent interference between the right and left channels and achieve excellent channel separation. Furthermore, the phono input section and XLR input section employ completely balanced transmission to ensure high-purity signal transmission with minimum effect of noise. The USB input circuit in the digital input section is equipped with a capacitor of high-quality ruby mica and a power conditioner with nonmagnetic carbon film resistors for blocking electrical noise e.g. from a PC and for minimising the effect of external noise. The A/D converter incorporates a high-performance chip made by Asahi Kasei Microdevices (AKM) for high-precision A/D conversion. Thus, the SU-R1000 reproduces outstanding sound quality from any analogue or digital input sources. High Rigidity Chassis and Design The rigidity of the chassis has been enhanced extensively to suppress the enclosure vibration that is also a source of noise. The inner chassis features a double-deck separated structure. Mounted on the upper deck is the power amp section consisting of the amplification circuit and its power supply circuit. Installed on the lower deck is the pre-amp section which is comprised of the analogue input section, including the phono equaliser, and the digital input section as well as the power supply circuits for those circuits. Not only the upper and lower decks but also individual circuit blocks are separated from one another by steel shield plates. These steel shield plates also serve as reinforcing plates for strengthening the rigidity of the entire chassis. On the outside, the front panel is 10-mm thick, while the side panels and top panel are made of 6-mm-thick alumite-treated aluminum plates.They have also improved the rigidity and vibration resistance. The insulators that support the chassis are made of cast iron with excellent signal attenuation characteristics. All in all, the above parts and materials enhance the quality of internal signals and eliminate the effects of external vibrations at highest levels. Input and output terminals made of meticulously selected high-quality parts - Speaker terminals designed to allow connection of extra-large diameter speaker cables - Y-lug terminals for ensuring reliable cable connection - Neutrik-manufactured analogue balance input terminals and PHONO XLR input terminals (exclusively for MC) - Analogue input terminals with gold-plated, machined brass parts Technics’ refined design - Attractive front panel embellished with high-quality hairline surface finish and equipped with an iconic, large dual-needle meter - Volume dial and selector knob made of parts machined from solid aluminum blocks and spin-finished Intelligent Phono EQ The Intelligent Phono EQ mounted in the SU-R1000 utilises the sound quality improvement technology for DSP, which Technics has accumulated through the development of LAPC, in order to realise high sound quality not possible with analogue Phono-EQ. This technology consists of three parts: 1. Accurate EQ Curve, 2. Crosstalk Canceller and 3. Response Optimiser. These functions can be turned ON/OFF to suit the user’s preference. Accurate EQ Curve – Made possible by hybrid analogue/digital circuit design An accurate EQ curve is achieved by a hybrid analogue-digital system. The high-gain low-pass filter (LPF) performs analogue processing, while high frequencies are raised after the A/D conversion. The use of the 40-dB LPF(Low-pass filter) in the analogue region suppresses the bit loss during digital filter processing, and high frequencies are raised with high accuracy in the digital region to achieve a high S/N ratio. Crosstalk Canceller - For measurement and improvement of crosstalk characteristic unique to each cartridge This function measures the crosstalk characteristic of the installed cartridge by using the crosstalk measuring signal recorded on the Calibration Record bundled with the SU-R1000. It then performs reverse-correction using the built-in DSP to achieve significant improvement of the crosstalk characteristic. This results in a more precise sound image and a wider sound ambience. Phono Response Optimiser - For correction of disturbance in cartridge frequency characteristics This function measures the frequency characteristics of the installed pickup cartridge by using a TSP (Time Stretched Pulse) signal recorded on the bundled Calibration Record, and corrects characteristics disturbance. It corrects the effect of impedance matching between the pickup cartridge and the phono equaliser to reveal the true sound quality of the cartridge. This technology aims to improve sound quality by avoiding a selector such as a switch in the high-sensitivity phono input line for the removal of the possibility of noise disturbance. *Although the record may be warped depending on the production method or its characteristics, this record passed the test for proper signal reading and is shipped. *The record may be warped depending on the storage environment in your house. Please note a badly warped record may not only disturb the measurement but also hurt the cartridge.

JENO Engine Jitter is a major cause of distortion in digital systems, and is caused by mis-timing in the master clocks used in digital-to-analogue conversion. To eliminate the degradation of sound caused by jitter, Technics has developed an original jitter reduction circuit, comprising a clock generator in the noise-shaping system to reduce jitter in the low-frequency range and a high-precision sample rate converter for suppressing jitter in the high-frequency range. Thus it reduces jitter in an ideal way over the entire frequency range. This works with original high-precision PWM (Pulse Width Modulation) conversion circuit, optimising the noise-shaping speed, the degree and re-quantisation number, and the PWM gradation, in order to convert high-resolution signals to PWM without causing any damage to the dynamic range. These technologies enable Technics digital amplifier designs to reproduce the natural and delicate nuances of music. ADCT (Active Distortion Cancelling Technology) The Active Distortion Cancelling Technology newly developed by Technics accurately extracts and removes distortion in the power output stage which is generated by the speaker’s counter electromotive force and voltage drops. In the Hi-Fi audio market where an unlimited number of audio systems can be configured by combining various products, high-end audio amplifiers need to optimally drive a diversity of speakers. The Active Distortion Cancelling Technology accurately extracts distortion by determining the difference between the speaker terminal output and JENO output and then applies correction to the output digital signal, thus correcting the conventional digital amp system. This provides powerful speaker driving force and acoustic energy while offering the superior benefits of a digital amplifier, such as low noise, precise sound image and expansive sound ambience, regardless of the types of connected speakers. Advanced Speed Silent Power Supply The SU-R1000 uses a switching power supply system to ensure a stable supply of voltage and current required by the digital amp. In a conventional switching power supply system, the ON time of the switching operation was controlled in order to stabilise the voltage, and this causes the switching frequency to fluctuate according to the load, resulting in a modulation noise to affect the sound quality. The Advanced Speed Silent Power Supply has eliminated this noise by fixing the switching frequency in the 400kHz band. Furthermore, a Super Low Noise Regulator is provided in the later stage. This prevents the decrease of regulation resulting from the fixed switching frequency and impedes the mixing of noise component into high frequencies. The result is a high-response power supply that results in the best performance from the digital amplifier. Four Independent Power Supply Units In the SU-R1000, every element comprising the power supply has been diligently studied and revised for higher sound quality. What’s more, four independent power supply units are provided for different circuit blocks for further enhancement of sound quality. Since the SU-R1000 is an integrated amplifier, the internal circuits consist of a pre-amp stage and power amp stage in a mix of analogue and digital circuits. The Phono-EQ section which processes minute analogue signals is particularly susceptible to the effect of noise transmitted through the power supply line. The SU-R1000 uses separate power supply units for the analogue circuits and digital circuits in the pre-amp stage. It also uses separate power supply units for the right and left channels in the power amp stage that requires large electrical power. With the four independent power supply units, the SU-R1000 prevents power-line-induced interference among the circuit blocks and realises a high S/N ratio and superb separation. High-grade Digital/Analog I/O Circuit The phono input section and analogue input section feature a full-discrete circuit design. Technics has realised an ideal, symmetrical circuit layout and performed meticulous tuning. The new circuits prevent interference between the right and left channels and achieve excellent channel separation. Furthermore, the phono input section and XLR input section employ completely balanced transmission to ensure high-purity signal transmission with minimum effect of noise. The USB input circuit in the digital input section is equipped with a capacitor of high-quality ruby mica and a power conditioner with nonmagnetic carbon film resistors for blocking electrical noise e.g. from a PC and for minimising the effect of external noise. The A/D converter incorporates a high-performance chip made by Asahi Kasei Microdevices (AKM) for high-precision A/D conversion. Thus, the SU-R1000 reproduces outstanding sound quality from any analogue or digital input sources. High Rigidity Chassis and Design The rigidity of the chassis has been enhanced extensively to suppress the enclosure vibration that is also a source of noise. The inner chassis features a double-deck separated structure. Mounted on the upper deck is the power amp section consisting of the amplification circuit and its power supply circuit. Installed on the lower deck is the pre-amp section which is comprised of the analogue input section, including the phono equaliser, and the digital input section as well as the power supply circuits for those circuits. Not only the upper and lower decks but also individual circuit blocks are separated from one another by steel shield plates. These steel shield plates also serve as reinforcing plates for strengthening the rigidity of the entire chassis. On the outside, the front panel is 10-mm thick, while the side panels and top panel are made of 6-mm-thick alumite-treated aluminum plates.They have also improved the rigidity and vibration resistance. The insulators that support the chassis are made of cast iron with excellent signal attenuation characteristics. All in all, the above parts and materials enhance the quality of internal signals and eliminate the effects of external vibrations at highest levels. Input and output terminals made of meticulously selected high-quality parts - Speaker terminals designed to allow connection of extra-large diameter speaker cables - Y-lug terminals for ensuring reliable cable connection - Neutrik-manufactured analogue balance input terminals and PHONO XLR input terminals (exclusively for MC) - Analogue input terminals with gold-plated, machined brass parts Technics’ refined design - Attractive front panel embellished with high-quality hairline surface finish and equipped with an iconic, large dual-needle meter - Volume dial and selector knob made of parts machined from solid aluminum blocks and spin-finished Intelligent Phono EQ The Intelligent Phono EQ mounted in the SU-R1000 utilises the sound quality improvement technology for DSP, which Technics has accumulated through the development of LAPC, in order to realise high sound quality not possible with analogue Phono-EQ. This technology consists of three parts: 1. Accurate EQ Curve, 2. Crosstalk Canceller and 3. Response Optimiser. These functions can be turned ON/OFF to suit the user’s preference. Accurate EQ Curve – Made possible by hybrid analogue/digital circuit design An accurate EQ curve is achieved by a hybrid analogue-digital system. The high-gain low-pass filter (LPF) performs analogue processing, while high frequencies are raised after the A/D conversion. The use of the 40-dB LPF(Low-pass filter) in the analogue region suppresses the bit loss during digital filter processing, and high frequencies are raised with high accuracy in the digital region to achieve a high S/N ratio. Crosstalk Canceller - For measurement and improvement of crosstalk characteristic unique to each cartridge This function measures the crosstalk characteristic of the installed cartridge by using the crosstalk measuring signal recorded on the Calibration Record bundled with the SU-R1000. It then performs reverse-correction using the built-in DSP to achieve significant improvement of the crosstalk characteristic. This results in a more precise sound image and a wider sound ambience. Phono Response Optimiser - For correction of disturbance in cartridge frequency characteristics This function measures the frequency characteristics of the installed pickup cartridge by using a TSP (Time Stretched Pulse) signal recorded on the bundled Calibration Record, and corrects characteristics disturbance. It corrects the effect of impedance matching between the pickup cartridge and the phono equaliser to reveal the true sound quality of the cartridge. This technology aims to improve sound quality by avoiding a selector such as a switch in the high-sensitivity phono input line for the removal of the possibility of noise disturbance. *Although the record may be warped depending on the production method or its characteristics, this record passed the test for proper signal reading and is shipped. *The record may be warped depending on the storage environment in your house. Please note a badly warped record may not only disturb the measurement but also hurt the cartridge.

Με εξαιρετική ενίσχυση Hypex NCore Class D και την κορυφαία πλατφόρμα ροής μουσικής StreamMagic επί της συσκευής, το μόνο που χρειάζεται να κάνετε είναι να προσθέσετε ηχεία για να απολαύσετε εξαιρετική ποιότητα ήχου υψηλής ανάλυσης από μια κομψή, διακριτική συσκευή. Χάρη στη σουίτα ψηφιακών και αναλογικών εισόδων, καθώς και στον υψηλής ποιότητας μετατροπέα ψηφιακού σε αναλογικό, το Evo μπορεί να είναι η καρδιά του συστήματος hi-fi σας για τα επόμενα χρόνια. Με 150W ανά κανάλι στα 8ohm , Bluetooth aptX HD είσοδος / έξοδος, Ενσωματωμένο προενισχυτή πικάπ,Έξοδο ακουστικών 5mm,Μεγάλη οθόνη 6,8 ",Ζώνες ηχείων A / B και 3 x αναλογικές είσοδοι (1X Balanced XLR), θα είναι αυτό που ζητούσατε.

Ο Marantz Model 30 είναι στερεοφωνικός, τηλεχειριζόμενος δικάναλος ενισχυτής, ισχύος 2x100 wrms στα 8 ohm. Αποκτήστε τον πιο δυνατό μουσικό ήχο από αυτόν τον ενσωματωμένο ενισχυτή Master. Το ειδικά σχεδιασμένο HDAM προσφέρει εξαιρετική λεπτομέρεια και αξέχαστη μουσικότητα από οποιοδήποτε στυλ μουσικής.

Ο Marantz Model 30 είναι στερεοφωνικός, τηλεχειριζόμενος δικάναλος ενισχυτής, ισχύος 2x100 wrms στα 8 ohm. Αποκτήστε τον πιο δυνατό μουσικό ήχο από αυτόν τον ενσωματωμένο ενισχυτή Master. Το ειδικά σχεδιασμένο HDAM προσφέρει εξαιρετική λεπτομέρεια και αξέχαστη μουσικότητα από οποιοδήποτε στυλ μουσικής.

Ο PM-12SE της εταιρείας Marantz ανήκει στην οικογένεια των solid στερεοφωνικών ολοκληρωμένων ενισχυτών. Ο ολοκληρωμένος ενισχυτής συνδυάζει σε μία συσκευή προενισχυτή και τελικό ενισχυτή, άρα μπορεί να δεχθεί απευθείας το σήμα της εκάστοτε πηγής (cd/dvd player, πικάπ, ραδιόφωνο, κλπ.) και να το μεταφέρει στα ηχεία για αναπαραγωγή. Στην προκειμένη περίπτωση λειτουργεί με τρανζίστορ ή αλλιώς solid state. Η ισχύς του είναι 200W/4Ω ή 100W/8Ω. Διαθέτει είσοδο για πικάπ (phono).

Ο PM-12SE της εταιρείας Marantz ανήκει στην οικογένεια των solid στερεοφωνικών ολοκληρωμένων ενισχυτών. Ο ολοκληρωμένος ενισχυτής συνδυάζει σε μία συσκευή προενισχυτή και τελικό ενισχυτή, άρα μπορεί να δεχθεί απευθείας το σήμα της εκάστοτε πηγής (cd/dvd player, πικάπ, ραδιόφωνο, κλπ.) και να το μεταφέρει στα ηχεία για αναπαραγωγή. Στην προκειμένη περίπτωση λειτουργεί με τρανζίστορ ή αλλιώς solid state. Η ισχύς του είναι 200W/4Ω ή 100W/8Ω. Διαθέτει είσοδο για πικάπ (phono).

Magnat MR 780 Hybrid Στερεοφωνικός Ενισχυτής HI-Fi Μαύρο. Ο στερεοφωνικός δέκτης MR 780 ακολουθεί τη μοναδική υβριδική έννοια Magnat: Λειτουργούν στο στάδιο του προενισχυτή δύο επιλεγμένες, καμένες βαλβίδες ECC 81, οι οποίες παρέχουν σε όλο το σύστημα τους ζεστούς, ηχητικούς ήχους που έχουν καταξιωθεί τόσο από τους οπαδούς του hi-fi. Το ισχυρό, διακριτικά σχεδιασμένο στάδιο εξόδου τρανζίστορ παράγει 100 Watt ισχύος RMS ανά κανάλι στα 4 ohm. Και εδώ, οι τάσεις για όλα τα μεμονωμένα κυκλώματα έχουν σταθεροποιηθεί περίτεχνα. Με αυτόν τον τρόπο, το MR 780 συνδυάζει τέλειο ήχο και μέγιστη ισχύ για βέλτιστο συνολικό αποτέλεσμα και ήχο υψηλής ποιότητας πρώτης κατηγορίας. Πολλαπλές επιλογές Συνδέσεων συμπεριλαμβανομένου του Bluetooth. Εκτός από την ενίσχυση υψηλής ποιότητας, το MR 780 προσφέρει επίσης μεγάλη ευκολία και ευελιξία: Τα σήματα λαμβάνονται από τον στερεοφωνικό δέκτη μέσω 5 εισόδων υψηλού επιπέδου ή 2 οπτικών και 2 ομοαξονικών ψηφιακών εισόδων. Υπάρχει επίσης μια είσοδος υποδοχής 3,5 mm μπροστά για κινητές συσκευές. Ακόμα πιο βολική είναι η απευθείας ασύρματη σύνδεση μέσω Bluetooth 4.0 με aptX. Το ευρύ φάσμα των επιλογών σύνδεσης στο MR 780 ολοκληρώνεται με ένα ιδιαίτερα υψηλής ποιότητας στάδιο phono pre-amp για συστήματα MM καθώς και μια είσοδο USB audio 2.0. Η μετατροπή όλων των ψηφιακών σημάτων έως 24 bits / 192 kHz επιμελείται ένας μετατροπέας υψηλής ποιότητας D / A από τη Wolfson. Ο ενσωματωμένος ψηφιακός δέκτης DAB/DAB+ καθώς και ο δέκτης FM με RDS και ραδιοφωνικό κείμενο επεκτείνουν αυτό που είναι ήδη ένα ευρύ φάσμα λειτουργιών ακόμη περισσότερο. Οι χρήστες μπορούν να βρίσκουν όλες τις σημαντικές πληροφορίες ανά πάσα στιγμή σε μια μεγάλη οθόνη δύο γραμμών στο μπροστινό μέρος του δέκτη.

Magnat MA 900 Στερεοφωνικός Υβριδικός Ενισχυτής Hi-Fi. Ο συνδυασμός τεχνολογίας tube και τρανζίστορ έχει μακρά παράδοση στην Magnat. Άλλωστε, συνδυάζει τον βέλτιστο ήχο με μια εντυπωσιακή απόδοση. Το MA 900 δεν διαφέρει. Καταφέρνει και ξεχωρίζει με τα εντυπωσιακά τεχνικά χαρακτηριστικά του, την εκτεταμένη επιλογή εισόδων, τη βέλτιστη κατασκευή, καθώς και τον μινιμαλιστικό σχεδιασμό του. Απόδοση πλήρους ισχύος - 200 watts x 2 Τα tubes είναι επιλεγμένα προσεκτικά και έχουν ήδη "στρωθεί". Είναι υψηλού επιπέδου ECC 81 και φροντίζουν για την ενίσχυση των λεπτών σημάτων εισόδου και δημιουργούν τον ανεπανάληπτο ήχο του tube, τα τρανζίστορ ισχύος εξασφαλίζουν σταθερή συνεχή απόδοση 200 watt ημιτονοειδούς ισχύος ανά κανάλι. Η παλμική ισχύς που παράγεται φτάνει στο εντυπωσιακό νούμερο των 320 watt. Διαθέτει 5 αναλογικές εισόδους χαμηλού επιπέδου και είσοδος υποδοχής 3,5 mm στο μπροστινό μέρος της μονάδας, καθώς και 4 ψηφιακές εισόδους και είσοδος phono για συστήματα MM και MC. Όλες αυτές οι συνδέσεις θα καλύψουν και τα πιο εκτεταμένα συστήματα AV. Τα tablet, τα smartphone και οι υπολογιστές μπορούν επίσης να συνδεθούν μέσω Bluetooth με βέλτιστη ποιότητα ήχου χάρη στο πρότυπο aptX HD. MAGNAT MA 900 - Η ΠΑΡΑΔΟΣΗ ΣΥΝΑΝΤΑ ΤΟΝ ΜΟΝΤΕΡΝΙΣΜΟ Ο συνδυασμός μελωδικών tubes στη μονάδα προενισχυτή μαζί με ισχυρά τρανζίστορ μετατρέπει το MA 900 σε υβριδικό ενισχυτή. μια κατηγορία προϊόντων που είναι σπάνια αλλά έχει μακρά παράδοση στην Magnat. Οι σωλήνες, που έχουν ήδη "Στρωθεί" για τέλειο ήχο, επιλέγονται πριν από τη συναρμολόγηση για να διασφαλιστεί ότι χρησιμοποιείται ένα ζεύγος με απόλυτα συμβατές τιμές ΕΝΑ ΣΧΕΔΙΟ ΠΟΥ ΘΑ ΕΙΝΑΙ ΠΑΝΤΑ ΣΤΗΝ ΜΟΔΑ Όλα αυτά είναι συσκευασμένα σε ένα ανθεκτικό μεταλλικό περίβλημα με ένα μπροστινό πάνελ και στοιχεία λειτουργίας που είναι κατασκευασμένα από συμπαγές αλουμίνιο. Κάθε άγγιγμα είναι απόλαυση. Επιπλέον, η υβριδικότητα του MA 900 τονίζεται οπτικά από τους ξεχωριστές ενδείξεις που ανάβουν στην καθαρή οθόνη διπλής γραμμής στη μία πλευρά της μονάδας κατά την επιλογή της εισόδου και από τους σωλήνες που εκπέμπουν την απαλή λάμψη τους στην άλλη. Φυσικά, όλα αυτά μπορούν επίσης να ελεγχθούν με το τηλεχειριστήριο του συστήματος που παρέχεται.

Ο Theseus είναι ένας ενισχυτής λυχνίας κατηγορίας Α με ολοκληρωμένη κατασκευή, που προσφέρει κορυφαία ποιότητα ήχου για τους λάτρεις της καθαρής, αυθεντικής μουσικής εμπειρίας. Ως ενισχυτής κατηγορίας Α, απαιτεί ηχεία υψηλής ευαισθησίας για να ξεδιπλώσει πλήρως τις ηχητικές του αρετές.Ο Theseus διαθέτει ενισχυτή phono MM λυχνίας, τρεις εισόδους γραμμής και DAC USB για ψηφιακές πηγές. Οι είσοδοι και έξοδοι σήματος υλοποιούνται με επίχρυσες υποδοχές RCA, ενώ για τη σύνδεση των ηχείων χρησιμοποιούνται υψηλής ποιότητας ακροδέκτες. Ο έλεγχος της έντασης πραγματοποιείται μέσω του κλασικού μπλε Alps ποτενσιόμετρου. Ένα κομψό τηλεχειριστήριο με περίβλημα από αλουμίνιο προσφέρει πλήρη έλεγχο όλων των λειτουργιών του ενισχυτή: ρύθμιση έντασης, επιλογή εισόδου και σίγαση (mute).Η προσεκτική επιλογή τιμών και τύπων των ηλεκτρονικών εξαρτημάτων συμβάλλει στην αξιόπιστη λειτουργία των κυκλωμάτων και στην υψηλή ποιότητα ήχου του ενισχυτή. Ο σχολαστικός σχεδιασμός του PCB εξασφαλίζει εξαιρετική συμπεριφορά σε SNR (λόγος σήματος προς θόρυβο), παραμόρφωση και διαχωρισμό καναλιών. Η εσωτερική καλωδίωση του σήματος γίνεται με θωρακισμένα καλώδια υψηλής ποιότητας, ενώ η καλωδίωση ισχύος χρησιμοποιεί χάλκινα καλώδια υπερδιαστασιολογημένης διατομής (AWG), για μεταφορά ισχύος με χαμηλή αντίσταση. Όλα τα καλώδια ισχύος είναι στριμμένα ανά ζεύγη ώστε να ελαχιστοποιούνται οι ηλεκτρομαγνητικές παρεμβολές.Οι χειροποίητοι, πολυστρωματικοί μετασχηματιστές εξόδου επιτρέπουν στον ενισχυτή να αναδείξει την ηχητική σκηνή και κάθε μουσική λεπτομέρεια σε όλο το φάσμα των συχνοτήτων, προσφέροντας μια μοναδική ακουστική εμπειρία. Κατασκευάζονται από εμάς και υπόκεινται σε αυστηρούς ελέγχους ποιότητας και αξιοπιστίας — το ίδιο ισχύει και για τον μετασχηματιστή τροφοδοσίας και τα φίλτρα (chokes). Η τοποθέτηση των μετασχηματιστών και των φίλτρων έχει σχεδιαστεί έτσι ώστε να ελαχιστοποιείται η μαγνητική σύζευξη μεταξύ μετασχηματιστή τροφοδοσίας και εξόδου.

Advance Paris, the French manufacturer of high fidelity presents the latest of its CLASSIC range designed for the demanding music lovers. This new integrated amplifier has numerous technical advantages. We thus confirm our desire to leave nothing to chance and optimize each of the modules that make up this integrated amplifier. We get a device with many possibilities, operated intuitively, thanks to an ergonomics that can reference, and above all flawless and blameless musicality, all offered at a very competitive price, compared to the huge potential of X- i1100. The X-i1100 has no less than six inputs, including a mobile magnet phono, an asymmetrical and symmetrical CD, a tuner, two auxiliaries and a direct «Amp ln» input. The digital inputs are also numerous: a USB, an AES, and six S / PDIF including four optics. The outputs have not been forgotten: one dedicated to asymmetrical line recording and one preamplifier output, in order to connect an additional power block to the X-i1100. The X-i1100 can drive any type of passive speaker with its efficient 220W per channel under 8Ω ( 400W under 4Ω €! ) Relying on a toroidal transformer of 700VA and 60000uF filtering capacity. The preamplification stage has been designed with switching relays as close as possible to the inputs.   The DAC has two digital signal receivers: an X-Mos processor and a USB3318 with jitter correction for the USB input and a Cirrus Logic CS8416 for all the others, AES and S / PDIF. The converter chosen, a Burr Brown PCM1796, handles signals up to 192 kHz under 24 bits. Metal film resistors and polypropylene capacitors contribute to the quality of reproduction of this integrated amplifier. Mounted on large heat sinks, the amplifier boards, connected to the output terminals by means of cables with a cross section of 4 mm2, have a triple push-pull per channel, thus three pairs of bipolar transistors NJW0281G and NJW0302G. The X-i1100 can operate up to 45 W in a mode similar to class A and switches to class AB beyond, when the «High Bias» switch located on the back of the device is activated. Mechanical engineering was also well designed: five compartments forming as many galvanic isolations and contributing to the rigidity of the X-i1100 are integrated into the chassis. Chassis made of steel with black aluminum sides as well as a perforated cover ensures optimum ventilation of the X-i1100.

Advance Acoustic PlayStream A7 Ολοκληρωμένος Δικτυακός Ενισχυτής Το PlayStream A7 είναι ένας συνδεδεμένος ενσωματωμένος ενισχυτής. Με ισχύ 2x115W / 8Ω στην κατηγορία ΑΒ, το A7 σχεδιάστηκε με απώτερο στόχο την ικανοποίηση του απαιτητικού audiophile. Η αναπαραγωγή του ήχου είναι ασυμβίβαστη, συμβατή με όλες τις νέες πηγές υψηλής ευκρίνειας. Το A7 ενσωματώνει ένα πρόγραμμα αναπαραγωγής δικτύου ethernet και wifi που περιλαμβάνει πολλές υπηρεσίες όπως Spotify, Deezer, Qobuz, Tidal, TuneIn, iHeartRadio, vTuner, Napster κ.λπ., επιτρέπει την αναπαραγωγή δικτύου της μουσικής βιβλιοθήκης σας που είναι αποθηκευμένη σε smartphone, tablet, υπολογιστή ή δίκτυο όπως το NAS (Synology). Ένας ψηφιακός δέκτης DAB +, ένας δέκτης FM, 4 ψηφιακές είσοδοι που περιλαμβάνουν ένα ομοαξονικό και 3 οπτικό, ένα HDMI ARC, μια είσοδο USB καθώς και 6 αναλογικές εισόδους, συμπεριλαμβανομένης μιας ρυθμιζόμενης εισόδου phono, εξοπλίζουν το PlayStream A7. Το PlayStream A7 είναι συμβατό με τους συμβατούς με Bluetooth δέκτες X-FTB01 και το νέο X-FTB02 με ενσωματωμένο HD aptX υψηλής ευκρίνειας. Εξοπλισμένο με High-Bias, το PlayStream A7 προσφέρει ήχο συγκρίσιμο με το Class A στα πρώτα watt. Συμβατό με DLNA και Airplay.

Advance Acoustic PlayStream A5 Ολοκληρωμένος Δικτυακός Ενισχυτής Το PlayStream A5 είναι ένας συνδεδεμένος ενσωματωμένος ενισχυτής. Με ισχύ 2x80W / 8Ω στην κατηγορία AB, το A5 σχεδιάστηκε με απώτερο στόχο την ικανοποίηση του απαιτητικού audiophile. Η αναπαραγωγή του ήχου είναι ασυμβίβαστη, συμβατή με όλες τις νέες πηγές υψηλής ευκρίνειας. Το A5 ενσωματώνει ένα πρόγραμμα αναπαραγωγής δικτύου ethernet και wifi που περιλαμβάνει πολλές υπηρεσίες όπως Spotify, Deezer, Qobuz, Tidal, TuneIn, iHeartRadio, vTuner, Napster κ.λπ., επιτρέπει την αναπαραγωγή δικτύου της μουσικής βιβλιοθήκης σας που είναι αποθηκευμένη σε smartphone, tablet, υπολογιστή ή δίκτυο όπως το NAS (Synology). Ένας ψηφιακός δέκτης DAB +, ένας δέκτης FM, 4 ψηφιακές είσοδοι που περιλαμβάνουν ένα ομοαξονικό και 3 οπτικό, μια είσοδο USB καθώς και 6 αναλογικές εισόδους, συμπεριλαμβανομένης μιας ρυθμιζόμενης εισόδου phono, εξοπλίζει το PlayStream A5. Το PlayStream A5 είναι συμβατό με τους νέους συμβατούς δέκτες Bluetooth X-FTB01 και X-FTB02 που ενσωματώνουν υψηλής ευκρίνειας HD aptX. Εξοπλισμένο με High-Bias, το PlayStream A5 προσφέρει ήχο συγκρίσιμο με το Class A στα πρώτα watt. Συμβατό με DLNA και Airplay.

Το Solo Uno προσφέρει απόλυτη απλότητα στον πολύπλοκο κόσμο της ροής ήχου, παρέχοντας ένα συμπαγές, κομψό και κομψό streamer με έναν ενσωματωμένο ενισχυτή. Με την κορυφαία ποιότητα ήχου Arcam, το αβίαστο σύστημα απαιτεί μόνο δύο ηχεία, το Solo Uno και μια κινητή συσκευή που χρησιμοποιούν την εφαρμογή εγγενών μουσικών επιλογής μέσω Apple AirPlay2, Roon Ready, UPnP ή Google Chromecast. Επιπλέον, το Solo Uno μπορεί να ενημερωθεί αυτόματα "over the air" για να παρέχει βελτιωμένες μελλοντικές δυνατότητες ροής και χρόνια απόλαυσης.

Για άλλη μια φορά η MARANTZ, με την αναγέννηση της σειράς Music Link, ενισχύει την ακουστική μοναδικότητα της με τονκαινούριο ολοκληρωμένο ενισχυτή HD-AMP1. Εφοδιασμένο με όλες τις συνδέσεις που χρειάζεστε καταφέρνει να ενώσει το παλιό με το καινούριο.

Για άλλη μια φορά η MARANTZ, με την αναγέννηση της σειράς Music Link, ενισχύει την ακουστική μοναδικότητα της με τονκαινούριο ολοκληρωμένο ενισχυτή HD-AMP1. Εφοδιασμένο με όλες τις συνδέσεις που χρειάζεστε καταφέρνει να ενώσει το παλιό με το καινούριο.

The RA-1592MKII delivers 200 Watts of Class AB output into 8 ohm speakers supporting your favorite analog, digital, XLR, aptXTM and AAC Bluetooth, PC-USB with MQA and Moving Magnet Phono stage inputs. The audiophile grade 32-bit/384kHz DAC and precisely tuned circuits delivers an unprecedented sound stage with exacting positioning. Whether a seasoned audiophile or casual listener, the time has never been better to be a music lover. A near limitless supply of music is at our fingertips accessible via streaming, digital mediums, classic vinyl and more.  Rotel has been designing and manufacturing high fidelity, high quality, high performance audio products for over 60 years accurately rendering audio with exceptional detail and stunning clarity. The RA-1592MKII proudly continues in the tradition and heritage of this iconic brand. The RA-1592MKII Integrated Amplifier includes circuit design innovations, optimization of audio signal paths and updates to critical power supply components delivering a breathtaking performance with dynamic rhythm and timing.  Utilizing Rotel’s best-in-class preamplifier topology and awardwinning power amplifier technology, the RA-1592MKII is a nocompromise, size-efficient, all-in-one integrated audio product. The RA-1592MKII delivers 200 Watts per channel into 8 ohms powered by Rotel’s in-house manufactured toroidal transformer feeding an array of slit-foil capacitors for rich, deep, controlled, bass energy. The RA-1592MKII supports your favorite sources including Analog, XLR, Digital, aptX™ and AAC wireless Bluetooth, PC-USB supporting MQA and 32-bit/384kHz PCM, and Moving Magnet Phono stage. Digital to Analog conversion utilizes a Texas Instruments premium DAC with precisely tuned output filter circuits delivering unprecedented acoustic detail, wide sound stage and exacting positioning.  The RA-1592KII is certified Roon Tested delivering the best experience using Roon software so you can just enjoy the music. Selectable A-B speaker outputs, RS232, Ethernet and 12V triggers ensure seamless integration with control systems.  Convenience, performance and value - the RA-1592MKII delivers.

The RA-1592MKII delivers 200 Watts of Class AB output into 8 ohm speakers supporting your favorite analog, digital, XLR, aptXTM and AAC Bluetooth, PC-USB with MQA and Moving Magnet Phono stage inputs. The audiophile grade 32-bit/384kHz DAC and precisely tuned circuits delivers an unprecedented sound stage with exacting positioning. Whether a seasoned audiophile or casual listener, the time has never been better to be a music lover. A near limitless supply of music is at our fingertips accessible via streaming, digital mediums, classic vinyl and more.  Rotel has been designing and manufacturing high fidelity, high quality, high performance audio products for over 60 years accurately rendering audio with exceptional detail and stunning clarity. The RA-1592MKII proudly continues in the tradition and heritage of this iconic brand. The RA-1592MKII Integrated Amplifier includes circuit design innovations, optimization of audio signal paths and updates to critical power supply components delivering a breathtaking performance with dynamic rhythm and timing.  Utilizing Rotel’s best-in-class preamplifier topology and awardwinning power amplifier technology, the RA-1592MKII is a nocompromise, size-efficient, all-in-one integrated audio product. The RA-1592MKII delivers 200 Watts per channel into 8 ohms powered by Rotel’s in-house manufactured toroidal transformer feeding an array of slit-foil capacitors for rich, deep, controlled, bass energy. The RA-1592MKII supports your favorite sources including Analog, XLR, Digital, aptX™ and AAC wireless Bluetooth, PC-USB supporting MQA and 32-bit/384kHz PCM, and Moving Magnet Phono stage. Digital to Analog conversion utilizes a Texas Instruments premium DAC with precisely tuned output filter circuits delivering unprecedented acoustic detail, wide sound stage and exacting positioning.  The RA-1592KII is certified Roon Tested delivering the best experience using Roon software so you can just enjoy the music. Selectable A-B speaker outputs, RS232, Ethernet and 12V triggers ensure seamless integration with control systems.  Convenience, performance and value - the RA-1592MKII delivers.

Rated power output: 75W per channel / 4 ohms at THD 1% 60W per channel / 4 ohms at THD 0,015 and 20Hz-20kHz 45W per channel / 8 ohms at THD 1% 35W per channel / 8 ohms at THD 0,015 and 20Hz-20kHz Dynamic peak power: 135W per channel / 4 ohms 80W per channel / 8 ohms Frequency response: 2Hz - 200kHz (-3dB) at 15W 2Hz - 100kHz (-3dB) at maximum power Signal-to-noise ratio: >90dB at 1W >105dB at 60W Voltage and power consumption: AC220-240V / 50Hz Dimensions (WxDxH): 440 x 330 x 85mm Weight: 11,6Kg

Το Elipson Connect 250 οδηγεί εύκολα ένα ζευγάρι παθητικών ηχείων και επιτρέπει τη μετάδοση οποιασδήποτε μουσικής μέσω Bluetooth ή Wi-Fi από οποιαδήποτε πλατφόρμα ή από τα αποθηκευμένα αρχεία της μουσικής σας.Το Connect 250 ενσωματώνεται εύκολα σε οποιοδήποτε περιβάλλον, με υγρασία η χωρίς, χάρη στις δύο βάσεις στήριξης.Στη συνέχεια, μπορεί να τοποθετηθεί σε τοίχο ή κάτω από ψευδοροφή.Το μακρί υπέρυθρο καλώδιο, που παρέχεται, διευκολύνει την ενσωμάτωσή του.Χάρη στην εφαρμογή Elipson BT (Androïd και iOS) μπορείτε να μετονομάσετε κάθε συσκευή Connect 250 που εμφανίζεται στο δίκτυό του bluetooth σας.Είναι απόλυτα συμβατό με τα άλλα προϊόντα της σειράς ELIPSON CONNECT, και κατάλληλο για την δημιουργιά διαφορετικών ζωνών μέσα σε ένα σπίτι.  

Ο PM6007 προσφέρει τον πιο μουσικό ήχο της Marantz και είναι η ιδανική επιλογή για όσους είναι έτοιμοι να κάνουν το επόμενο βήμα στο σύστημα Hi-Fi 2 καναλιών. Τροφοδοτείται από έναν μετασχηματιστή Toroidal και προσαρμοσμένους πυκνωτές μπλοκ, ο PM6007 παρέχει ισχύ 45 Watt (8ohm, 20Hz-20kHz) ανά κανάλι . Μπορείτε εύκολα να συνδέσετε αναλογικές και ψηφιακές πηγές ή να συνδέσετε το πικάπ σας με τον ενσωματωμένο προενισχυτή phono. Ακούστε το αγαπημένο σας περιεχόμενο ήχου Hi-Res μέσω του μετατροπέα 192-kHz / 24-bit D/A και απολαύστε βελτιωμένα μπάσα με την επιλογή subwoofer-out. Χαρακτηριστικά: 2 x 60W RMS 4 Ohm Τοροειδής μετασχηματιστής και εξαιρετικής ποιότητας περιφερειακά Ψηφιακές είσοδοι (2 x Opt/ 1 x Coax) Υψηλής ποιότητας μετατροπέας DAC AK4490 & HDAM SA3 Marantz Musical Digital Filtering, Shottky diodes, Source Direct 5 x Audio in, 1 x Audio out, Phono MM, D-Bus , Speaker A/B Έξοδος ακουστικών Marantz HDAM SA3 κυκλώματα Επίχρυσες επαφές σύνδεσης ηχείων, Επίχρυσες επαφές σύνδεσης εισόδων εξόδων Διαστάσεις ΠxΒxΥ (cm) :440x370x105 Βάρος : 7,8 kgs

Ο PM6007 προσφέρει τον πιο μουσικό ήχο της Marantz και είναι η ιδανική επιλογή για όσους είναι έτοιμοι να κάνουν το επόμενο βήμα στο σύστημα Hi-Fi 2 καναλιών. Τροφοδοτείται από έναν μετασχηματιστή Toroidal και προσαρμοσμένους πυκνωτές μπλοκ, ο PM6007 παρέχει ισχύ 45 Watt (8ohm, 20Hz-20kHz) ανά κανάλι . Μπορείτε εύκολα να συνδέσετε αναλογικές και ψηφιακές πηγές ή να συνδέσετε το πικάπ σας με τον ενσωματωμένο προενισχυτή phono. Ακούστε το αγαπημένο σας περιεχόμενο ήχου Hi-Res μέσω του μετατροπέα 192-kHz / 24-bit D/A και απολαύστε βελτιωμένα μπάσα με την επιλογή subwoofer-out. Χαρακτηριστικά: 2 x 60W RMS 4 Ohm Τοροειδής μετασχηματιστής και εξαιρετικής ποιότητας περιφερειακά Ψηφιακές είσοδοι (2 x Opt/ 1 x Coax) Υψηλής ποιότητας μετατροπέας DAC AK4490 & HDAM SA3 Marantz Musical Digital Filtering, Shottky diodes, Source Direct 5 x Audio in, 1 x Audio out, Phono MM, D-Bus , Speaker A/B Έξοδος ακουστικών Marantz HDAM SA3 κυκλώματα Επίχρυσες επαφές σύνδεσης ηχείων, Επίχρυσες επαφές σύνδεσης εισόδων εξόδων Διαστάσεις ΠxΒxΥ (cm) :440x370x105 Βάρος : 7,8 kgs

The A10 is a 40-watt per channel integrated amplifier that will satisfy the audio purist who doesn’t require high power output or digital streaming capability. Its straightforward operation is refreshing and its performance is a pleasure to listen to. If you are considering taking your first step into a true hi-fi system or are seeking a small, high quality audio system for another living space, you can’t do better than the A10 integrated amplifier. The A10 is all about maximum performance for the price. Its design strips away added features that increase the overall cost and can detract from your musical enjoyment. Simple to operate and a pleasure to listen to, the A10 has connectivity for all your listening sources including an analogue media input (3.5mm mini-jack) for iOS devices or other media players, a CD input, a MM phono input in case your taste runs to classic LPs, a Tuner input to listen to your favourite radio stations and two Aux inputs for other analogue source devices. Specifications: DIMENSIONS (W × H × D): 430 × 72 × 342mm, 17" × 2.9" × 13.5" FRONT PANEL HEIGHT: 60mm (2.36") POWER REQUIREMENTS: 120V, 60Hz POWER CONSUMPTION: 220W NET WEIGHT: 5.9kg (13lbs.) BTU RATING (4Ω, 1/8th power): 311 BTU/h CONTINUOUS POWER OUTPUT: 40W/Ch (All channels driven, 8Ω) TOTAL HARMONIC DISTORTION (THD): (20Hz–20kHz)

Oλοκληρωμένος ενισχυτής 160W x 2 Nοσταλγικός HI-FI σχεδιασμός . Tεχνολογία του σήμερα .  Συνάισθημα Η μουσική γεννιέται από κάτι συναισθηματικό. Μια μοναδική, προσωπική ιστορία που ένας καλλιτέχνης επιθυμεί να μοιραστεί. Η κατανόηση του τρόπου δημιουργίας της μουσικής και της βοήθειας των καλλιτεχνών να την δημιουργήσουν, ενσωματώνεται  στο DNA της Yamaha μια θεμελιώδη κατανόηση της μουσικής, Aυθεντικός HI-FI ήχος O αυθεντικός, καθαρός Hi-Fi ήχος δεν έχει να κάνει με την ακρόαση του εξοπλισμού  αλλα  περισσότερο με τον ήχο του καλλιτέχνη να παίζει ζωντανά στο δωμάτιο. Pυθμός Νιώθοντας τη μουσική. Όχι μόνο να νιώθεις σαν να είσαι εκεί, αλλά να νιώθεις την ιστορία στη μουσική. Νιώθοντας το ρυθμό . Μόνο μια πραγματική αναπαράσταση της μουσικής μπορεί να το προσφέρει.  Xαρακτηριστικά: Μέγιστη ισχύς (4 ohms, 1kHz, 0.7% THD, για τηνΕυρώπη ): 160 W + 160 W High Dynamic Power/Ανα κανάλι (8/6/4/2 ohms): 105/135/190/220 W Damping Factor: ? 250 (1 kHz, 8 ohms) Απόκριση συχνότητας:  +0 / -3 dB (5Hz-100kHz) , +0 / -0.3 dB(20 Hz-20 kHz) RIAA Equalization Deviation +/-0.5 dB (PHONO (MM/MC)) Διαστάσεις  (Π x Υ x Β): 435?157?463 mm Βάρος:  22.0 kg; 48.5 lbs Receiver / Ολoκληρωμένος  Ενισχυτής  Ονοματική Ισχύς Εξόδου:   [20 Hz-20 kHz, 0.07% THD] 90 W + 90 W (8 ohms), 150 W + 150 W (4 ohms) Συνολική Αρμονική Παραμόρφωση  (20Hz to 20kHz): [Input 0.5 V] PHONO MC>LINE2 OUT: 0.02% (1.2 mVrms), PHONO>LINE2 OUT: 0.005% (1.2 Vrms), CD, etc.>SP OUT: 0.035% (50 W/8 ohms) Signal-to-Noise Ratio: PHONO MC: 90 db, PHONO MM: 96 dB, CD, etc.: 110 dB Ευαισθησία εισόδου [1 kHz, 100 W/8 ohms]: PHONO MC: 150 uVrms/50 ohms, PHONO MM: 3.5 mVrms/47 kohms, CD, etc.: 200 mVrms/47 kohms, MAIN IN: 1 Vrms/47 kohms Transformer: 625VA (Toroidal)

Oλοκληρωμένος ενισχυτής 160W x 2 Nοσταλγικός HI-FI σχεδιασμός . Tεχνολογία του σήμερα .  Συνάισθημα Η μουσική γεννιέται από κάτι συναισθηματικό. Μια μοναδική, προσωπική ιστορία που ένας καλλιτέχνης επιθυμεί να μοιραστεί. Η κατανόηση του τρόπου δημιουργίας της μουσικής και της βοήθειας των καλλιτεχνών να την δημιουργήσουν, ενσωματώνεται  στο DNA της Yamaha μια θεμελιώδη κατανόηση της μουσικής, Aυθεντικός HI-FI ήχος O αυθεντικός, καθαρός Hi-Fi ήχος δεν έχει να κάνει με την ακρόαση του εξοπλισμού  αλλα  περισσότερο με τον ήχο του καλλιτέχνη να παίζει ζωντανά στο δωμάτιο. Pυθμός Νιώθοντας τη μουσική. Όχι μόνο να νιώθεις σαν να είσαι εκεί, αλλά να νιώθεις την ιστορία στη μουσική. Νιώθοντας το ρυθμό . Μόνο μια πραγματική αναπαράσταση της μουσικής μπορεί να το προσφέρει.  Xαρακτηριστικά: Μέγιστη ισχύς (4 ohms, 1kHz, 0.7% THD, για τηνΕυρώπη ): 160 W + 160 W High Dynamic Power/Ανα κανάλι (8/6/4/2 ohms): 105/135/190/220 W Damping Factor: ? 250 (1 kHz, 8 ohms) Απόκριση συχνότητας:  +0 / -3 dB (5Hz-100kHz) , +0 / -0.3 dB(20 Hz-20 kHz) RIAA Equalization Deviation +/-0.5 dB (PHONO (MM/MC)) Διαστάσεις  (Π x Υ x Β): 435?157?463 mm Βάρος:  22.0 kg; 48.5 lbs Receiver / Ολoκληρωμένος  Ενισχυτής  Ονοματική Ισχύς Εξόδου:   [20 Hz-20 kHz, 0.07% THD] 90 W + 90 W (8 ohms), 150 W + 150 W (4 ohms) Συνολική Αρμονική Παραμόρφωση  (20Hz to 20kHz): [Input 0.5 V] PHONO MC>LINE2 OUT: 0.02% (1.2 mVrms), PHONO>LINE2 OUT: 0.005% (1.2 Vrms), CD, etc.>SP OUT: 0.035% (50 W/8 ohms) Signal-to-Noise Ratio: PHONO MC: 90 db, PHONO MM: 96 dB, CD, etc.: 110 dB Ευαισθησία εισόδου [1 kHz, 100 W/8 ohms]: PHONO MC: 150 uVrms/50 ohms, PHONO MM: 3.5 mVrms/47 kohms, CD, etc.: 200 mVrms/47 kohms, MAIN IN: 1 Vrms/47 kohms Transformer: 625VA (Toroidal)

Integrated Stereo Amplifier with HEOS Built-in Discover the PM7000N, the first Marantz Current Feedback integrated Hi-Fi amplifier with HEOS Built-in technology. The ideal choice for audio connoisseurs, the PM7000N includes high-grade audio components, Marantz own HDAMs, a toroidal transformer and a high-speed instantaneous current power supply. Stream your favourite music and enjoy high-resolution digital audio files up to 192kHz/24bit or DSD5.6. Switch to the high quality Phono MM input to listen to your beloved vinyls as never before. The digital inputs support PCM audio, and decode - beside MP3 - lossless digital files like ALAC, FLAC and WAV up to 24-bit/192-kHz for high-resolution listening. USB-A and HEOS Built-in additionally support DSD 2.8MHz and 5.6MHz playback. Stream your favourite music wirelessly via AirPlay2 and Bluetooth, and control the amplifier via the HEOS app or with leading voice agents Apple Siri, Google Assistant and Amazon Alexa where supported. Modern Integrated Amplifier The PM7000N is the first fully discrete, current feedback integrated Hi-Fi amplifier with HEOS Built-in technology for network music access from Marantz. It is the ideal choice for audio connoisseurs that require Marantz Musical sound with flexible operation and access to digital streaming music. The amplifier delivers a powerful 2x 60W into 8 ohm or 2 x 80W into 4 ohm (20Hz – 20kHz). The Most Musical Sound Engineered and extensively tuned by a team drawing on more than 65 years of Hi-Fi expertise, the PM7000N provides exceptional performance for your audio collection. Whether digital or analogue, enjoy the most musical sound from any source. Fully Discrete Current Feedback Power Amplifier with HDAM-S3 Current Feedback amplification, a renowned Marantz-proprietary circuit technology, is thoughtfully designed to match the requirements of high resolution music for wide-bandwidth and high-speed audio reproduction. The impedance at the Current Feedback point is minimized, generating a very low ground potential. Marantz Current Feedback amplifiers reduce the need for phase compensation by minimizing Negative Feedback (NFB). This simplifies the signal path and results in a high through-rate, excellent transient response and superb sonic transparency across the full bandwidth. Unlike conventional Voltage Feedback topology, Current Feedback renders the power amplifier nearly immune to difficult loudspeaker loads. Marantz HDAM-SA3 Technology Marantz developed its own discrete circuit boards called Hyper-Dynamic Amplifier Modules, or HDAMs, to replace the chip-based amps used elsewhere. Using discrete surface mount components with short mirror-image left and right signal paths, HDAMs outperform the regular integrated Op-amps dramatically in Slew Rate and noise level. The result is much more dynamic, accurate and detailed sound. Over the years, Marantz developed different HDAMs to fit the particular requirements of each player and amplifier. The PM7000N uses the high-grade SA3 version. High-Grade Sound Parts Marantz has a steadfast reputation for choosing the best-possible components for its Hi-Fi products, and the PM7000N is built with that same performance-first Hi-Fi approach. Marantz engineers selected and optimized the PM7000N through extensive listening in dedicated Marantz facilities in Europe and Japan using Hi-Fi tuned sound parts. Wide Range of Connectivity The PM7000N is equipped with 4 analogue inputs and one analogue output, plus a high quality Phone MM equalizer and features one coaxial and two optical digital inputs, along with a USB-A input for high resolution audio files. Hi-Res Audio Support With the ability to decode hi-res audio ALAC, FLAC and WAV lossless files up to 24-bit/192-kHz, as well as DSD 2.8MHz and 5.6MHz tracks (the audiophile format of SACD), enjoy music exactly as the artist intended. Listen to your music via the rear panel USB port or over network sources. Improved Integrated Phono Input For a long time, Marantz integrated amplifiers have featured high-quality phono stages. The PM7000N remains faithful to that legacy while also introducing a new design — one that integrates a FET (field-effect transistors) in the input stage. This provides high input impedance, eliminates the need for AC coupling capacitors and simplifies the signal path, lowering distortion and noise vastly improving the signal purity overall. Subwoofer Output Supports an optional external subwoofer with adjustable low pass crossover for low-frequency bass response within your listening environment. Enjoy accurate bass with no audible peaks or dips, no matter where you place your subwoofer. High Quality, Original Marantz SPKT-1+ Speaker Terminals The speaker terminals of the PM7000N are made of dense brass with a thick silver plating to provide best possible contact with speaker cables. Toroidal Transformer A Toroidal transformer offers several advantages that derive from its efficiency and power capability. The shape of it lends to low levels of electromagnetic radiation and mechanical vibration, producing improved sound quality over what you might experience with dated transformer models. Separate Power Supply for Stand-by In order to reduce power consumption in stand-by, the PM7000N features dual separate power supply circuits. While in standby the digital SMPS power supply is active so the network can wake up the PM7000N. When switching to operation mode, the SMPS power is switched off and the toroidal transformer is activated to supply the necessary high-current to reproduce the Marantz sonic signature. HEOS Built-in With HEOS Built-in technology, enjoy your favourite music in any room of your home for a wireless, whole-home audio experience. Play the same song in every room or select a different song for each connected room — the choice is yours. Enjoy music from Spotify Free or Premium, Amazon Music, Deezer, Tidal and more or your local music file libraries. With additional HEOS Built-in components, like HEOS-capable speakers, play all your music in one room or many. AirPlay 2 + Apple Siri Voice Control Stream audio from your favourite music services like Apple Music and Spotify or watch videos from services like YouTube and Netflix from any iPhone, iPad, Mac or Apple TV. Hear the audio perfectly synced to your speakers from AirPlay 2 sources.  For multi-room audio, wirelessly stream content to multiple AirPlay 2 compatible devices simultaneously with improved audio buffering to ensure smooth audio playback. AirPlay 2 provides control and grouping of compatible audio devices within the Apple Music or Home app. Use AirPlay 2 in-app or with your voice via Siri. Amazon Alexa Voice Control Use your voice to stream your favourite music services through Alexa with HEOS Built-in. Ask Alexa to play music from Amazon Music and more. Turn volume up or down, pause, mute and play the next song — all with your voice. To start streaming with Alexa voice commands, open the Alexa app and select “Skills.” Add HEOS Home Entertainment to enable. Then, go to Smart Home in the Alexa app menu and choose Devices and Discover or say “Alexa, discover my devices.” Google Assistant Voice Control Ask your Google Home, Google app or other devices with Google Assistant built-in to control content across your listening environment. Start music in the HEOS app, then ask your Google Assistant to control volume, play, pause, skip tracks and more. Key Features Power to suit your audio preference: 2ch fully discrete current feedback integrated Hi-Fi amplifier; 60W per channel (8-ohm, 20Hz – 20kHz)  Marantz proprietary HDAM-SA3 circuit: Wide dynamic range and famous Marantz soundstage  Shielded toroidal transformer: Delivering high level of clean power for pure amplification without distortion  Built-in Bluetooth and Wi-Fi with 2.4GHz/5GHz dual band support: Improved network stability even in Wi-Fi crowded homes  HEOS Built-in wireless music streaming: Play nearly unlimited music from your favourite streaming services like Spotify Free and Premium, Amazon Music, Deezer, TuneIn Internet Radio and more with the comfortable HEOS app  Wide range of connectivity: Four analogue inputs, one analogue output, one coaxial input, two optical digital inputs and one USB-A for high resolution audio files  High-performance, high-resolution audio playback: Supports high-resolution audio ALAC, FLAC and WAV lossless files up to 24-bit/192-kHz — plus, DSD 2.8MHz and 5.6MHz tracks for high-resolution listening supported by a high performance audio DAC AK4490  Play vinyl with exceptional clarity: Integrated phono input with newly design FET input stage to improve signal purity and improve sound  Fully shielded digital and network section with the option to deactivate: Minimises the risk of interference by digital section to achieve highest audio performance and a pure analogue experience Premium Marantz SPKT-1+ speaker terminals: Improved connection to speakers for high quality playback Speak your commands: Supports Amazon Alexa, Google Assistant and Apple Siri voice agents for seamless voice control  Works with your TV remote: Program the PM7000N to work with your TV remote and easily adjust volume up, volume down, mute and source selection

Μουσικότητα που κόβει την ανάσα. Ο ολοκληρωμένος ενισχυτής Edge A έχει σχεδιαστεί για να φέρει στη ζωή τη μουσική λεπτομέρεια. Προσφέρει εξαιρετικά ισορροπημένο ήχο με βάθος και σαφήνεια σε κάθε νότα. Οι άνθρωποι της Cambridge Audioανέπτυξαν τον Edge A με το αυτί, δοκιμάζοντας όλα τα επιμέρους εξαρτήματά του και επιλέγοντας μόνο εκείνα που τους ενθουσίασαν. Το τελικό αποτέλεσμα είναι μια πρωτοποριακή διάταξη που παράγει μια πολύ πιο καθαρή διαδρομή σήματος και αφήνει τη μουσική να αναπνεύσει. Ο Edge A προσφέρει τέλεια κλασικό βρετανικό ήχο - τίποτα δεν προστέθηκε, τίποτα δεν αφαιρέθηκε. Περισσότερες μουσικές λεπτομέρειες. Η εταιρία πρωτοστάτησε στη χρήση τοροειδών μετασχηματιστών σε ενισχυτές, οι οποίοι οδήγησαν σε βελτιωμένη απόδοση. Με τον Edge A έκανε ένα βήμα παραπέρα, χρησιμοποιώντας αντιθέτως συμμετρικούς δίδυμους τοροειδής μετασχηματιστές. Αυτό ακυρώνει τις ηλεκτρομαγνητικές παρεμβολές, προσφέροντας παράλληλα εξαιρετική ισχύ και διατηρώντας συνεχή τόνωση, ανεξάρτητα από το πόσο δυνατά παίζει. Άπλετη ισχύς χωρίς παραμόρφωση. Η χρήση της τυπικής τοπολογίας τάξης Α δεν θα ήταν αρκετά αποδοτική για τον Edge A. Αντίθετα, προστέθηκε μια τάση πόλωσης σε ένα παραδοσιακό σχεδιασμό Class AB, μειώνοντας την παραμόρφωση σε μη ακουστά επίπεδα. Αυτή η μοναδική διαμόρφωση παράγει επίσης λιγότερη θερμότητα και καθιστά όλο το σύστημα πολύ πιο αποτελεσματικό. Hi-res bluetooth. Συνδέστε οποιαδήποτε συσκευή Bluetooth με τον Edge A για να μεταδώσετε εύκολα τη μουσική σας. Με την υποστήριξη aptX HD, μπορείτε να αναπαράγετε τον ήχο σας έως και 24 bit / 48 kHz για μια απίστευτα πλούσια εμπειρία ακρόασης. Ηχητική ισορροπία. Ο Edge A σχεδιάστηκε με ένα μοναδικό τρόπο. Οι μηχανικοί της Cambridge Audio αντικατέστησαν τους συμβατικούς πυκνωτές με μια τοπολογία συζευγμένης με DC και πρόσθεσαν επίσης solid state volume control. Το τελικό αποτέλεσμα είναι μια καθαρή διαδρομή σήματος, τέλεια ισορροπημένη σε κάθε ένταση. Χαρακτηριστικά: CONTINUOUS POWER OUTPUT: 100W RMS into 8 Ohms; 200W RMS into 4 Ohms THD (UNWEIGHTED): 

Ο AXA35 διαθέτει ισχύ 35 Watt ανά κανάλι, ένα ενσωματωμένο phono stage κινητού μαγνήτη για τους λάτρεις του πικάπ, μια λευκή οθόνη και μία υποδοχή ακουστικών ¼ ίντσας  για εξαιρετικές προσωπικές ακροάσεις. Χαρακτηριστικά: POWER OUTPUT: 35 Watts (into 8 Ohms) THD (UNWEIGHTED):  50 MAX. POWER CONSUMPTION: 260W BASS/TREBLE CONTROLS: Shelving, ultimate boost/cut +/- 10dB @ 100Hz and 10kHz STANDBY POWER CONSUMPTION: 

Ο AXA25 είναι ένας ποιοτικός ολοκληρωμένος ενιισχυτής που προσφέρει ισχύ 25 watts ανά κανάλι ενώ παράλληλα αποτελεί μια εξαιρετικά oικονομική πρόταση. Ο AXA25 διαθέτει είσοδο Aux 3.5mm στην πρόσοψη, η οποία κάνει εύκολη τη σύνδεση με smartphones ή tablets, καθώς και τέσσερις αναλογικές εισόδους στην πίσω πλευρά για τη σύνδεση διάφορων πηγών. Χαρακτηριστικά: POWER OUTPUT: 25 Watts (into 8 Ohms) THD (UNWEIGHTED): 

Το Uniti Nova αποτελεί την απόδειξη ότι ένα all-in-one player μπορεί να προσφέρει ποιότητα audiophile. Οποιαδήποτε και αν είναι η πηγή , η μουσική σου θα μεταμορφωθεί σε μια φανταστική ηχητική εμπειρία. Το Uniti Nova έχει διαμορφωθεί για να προσφέρει την καλύτερη δυνατή λύση σε All-In-One ενισχυτή-προενισχυτή - DAC - Streamer. Όλος ο διαθέσιμος χώρος  έχει χρησιμοποιηθεί για να παρέχει 80 watt ανά κανάλι ενίσχυσης κατηγορίας A/B, ικανό να οδηγήσει ακόμα και τα πιο απαιτητικά ηχεία έτσι ώστε να απολαύσετε κάθε λεπτομέρεια που θα ακούσετε σε κάθε νότα.

Με πληθώρα χαρακτηριστικών και ικανότητα να αναπαράγει, να αντιγράψει , να αποθηκεύσει και να σου προσφέρει την πολύτιμη μουσική συλλογή σου με εκπληκτική ποιότητα ήχου, το Uniti Star προσφέρει αμέτρητες δυνατότητες. Στρίμαρε τη μουσική σου σε υψηλή ανάλυση, παίξε ή αντέγραψε τα cd σου , συντονίσου στους αγαπημένους σου ραδιοφωνικούς σταθμούς , μπες στον κόσμο της μουσικής μέσω πλήθους υπηρεσιών streaming και βελτίωσε δραματικά την ποιότητα του ήχου της τηλεόρασής σου ή των video game σου. Προετοιμασμένο να ταιριάξει με κάθε είδους ηχητική εγκατάσταση , το Uniti Star θα σας κάνει να ανακαλύψετε ξανά ολόκληρη τη μουσική συλλογή σας μέσα από έναν βαθύ και καθηλωτικό ήχο.

Ο ολοκληρωμένος ενισχυτής M2si μεταφέρει την ασύγκριτη εμπειρία των premium ενισχυτών μας σε μια πιο προσιτή κατηγορία τιμής. Ενσωματώνει τεχνολογία που προέρχεται από τον ισχυρό και θρυλικό κορυφαίο ενισχυτή μας Titan, καθώς και άλλες high-end λεπτομέρειες όπως οι μεταλλικοί διακόπτες υψηλής ποιότητας. Ο M2si αποδίδει 76 watt ανά κανάλι στα 8 ohm και 137 watt στα 4 ohm, προσφέροντας έτσι τη δυνατότητα να οδηγήσει εύκολα μια μεγάλη γκάμα ηχείων, ακόμα και μοντέλα με υψηλές απαιτήσεις ισχύος.Η ευελιξία του ενισχύεται από τις εξαιρετικές δυνατότητες συνδεσιμότητας, οι οποίες περιλαμβάνουν έξι εισόδους line-level και διακόπτη για λειτουργία home-theatre bypass. Διαθέτει προενισχυτή Class A με ανεξάρτητο τροφοδοτικό, συνδυασμένο με ένα διακριτό ζεύγος τελικών ενισχυτών. Στην πράξη, αυτό σημαίνει ότι ο M2si προσφέρει τα πλεονεκτήματα απόδοσης μιας διάταξης προενισχυτή/τελικού, με την ευκολία και την πρακτικότητα ενός ενιαίου σχεδιασμού.Η απόδοσή του είναι απόλυτα σταθερή, ο ηχητικός του χαρακτήρας είναι ισορροπημένος και συνεργάζεται άψογα με μια ευρεία γκάμα ηχείων. Όλα αυτά προσφέρονται μέσα από έναν κομψό και λιτό σχεδιασμό, χωρίς περιττές υπερβολές.Specifications:OutputPower 72 Watts per channel into 8 Ohms (18dBW)Voltage 22 Volts RMS, 20Hz to 20 kHz; onset of clipping62 Volts peak to peakCurrent 25 Amps peak to peakDamping factor 36Output devices 1 pair per channelLine inputTHD+N < 0.014 % typical, 20Hz to 20 kHzSignal / noise ratio > 96dB ‘A’-weightedInput impedance 40 k OhmsFrequency response +0, –0.1dB, 10Hz to 20 kHzConnectionsLine level inputs 6 pairs line level RCA connectorsLine level outputs 1 pair line level RCA connectors, constant level TAPE outputs1 pair line level RCA connectors, preamp outputs for e.g. bi-ampingSpeaker outputs 2 pairs 4mm banana plug/binding postsPower requirementMains voltages 115/230VAC 50/60Hz (factory pre-set)100VAC 50/60Hz (alternative)Consumption 320 Watts maximumWeightUnit only, unboxed 9.2 kg (20¼ lbs)In shipping carton 13 kg (30⅔ lbs)DimensionsWide 440 mm (17⅓”)High, including feet 100 mm (4”)Deep (front to back) including terminals 400 mm (15¾”)

The NAD D 3045 is everything a modern amplifier should be; compact, energy efficient, powerful, silent, High Resolution capable, and packed with cutting edge features like DSD and MQA playback. NAD’s expertise in both digital and analog engineering is on full display in this flexible and affordable amplifier. Features: 2 x 60W Hybrid Digital Amplifier Two-Way Bluetooth powered by Qualcomm aptX HD audio Asynchronous USB 24/192 Input supporting MQA and DSD HDMI Audio Return Channel Coax and Optical Input MM Phono and Line Input Preamp Out Sub Out Headphone Amp IR Remote Gross dimensions (W x H x D)*: 70 x 235 x 265 mm Net weight: 3.6kg Shipping weigh: 2.6kg

PM-10 Integrated amplifier The new reference class Integrated amplifier Four switching power amplifier channels in bridged mode (two per channel) for maximum grip and drive  True Balanced Concept from input to speaker to realise ground-free signal management Massive power: 200Wpc per channel into 8ohms, and 400Wpc into 4ohms Easy driving of a wide range of speakers Wide-ranging dynamic ability thanks to instant high-current power supply Fully balanced throughout: both preamplifier and power amplifiers Marantz Hyper Dynamic Amplifier Modules (HDAM) in preamp stage Dual mono power amplifier configuration Separate power supplies for preamplifier and control processor, and for each power amp channel Discrete phono stage for moving coil and moving magnet cartridges in its own shielded case. High-quality construction with double-layer chassis, 5mm thick aluminium top lid, solid aluminium front, copper plated chassis and high-purity copper speakers terminals Double thickness copper PCB for the output section and main power supplies Amplifiers are at the core of Marantz history: its very first product was a high-quality preamplifier designed to make the most of the then-new LP record format. And with a history stretching all the way to that ground-breaking Audio Consolette – which Saul B Marantz started manufacturing in 1952, and which soon became the first real Marantz product, the Model 1 preamplifier – , it’s no surprise that the company’s very latest Premium Series model, the PM-10, is an integrated amplifier built to set new standards with all of today’s music formats. In fact, this massively powerful integrated amplifier is constructed more like a high-end separate preamplifier and a pair of monobloc power amps, but all in one beautifully finished case, designed both to maximise performance and create a strong visual statement. Making an integrated amplifier with dual monobloc design fitting in a normal size cabinet is made possible by the use of a stereo switching amplifier. Its aim? To reveal the maximum musical involvement from everything from LPs to the latest high-resolution audio files and beyond, and with all the power and control required to drive the most demanding loudspeakers, allowing them to perform at their best. Optimised design To achieve such quality, while still delivering class-leading power, means optimising each section of the amplifier for its task, just as would be done in a design using a separate preamplifier and monobloc power amps.  Commonly, amplifiers use a single transformer, with separate power supply regulation for the preamplifier and power amplifier sections; the PM-10 takes things much further. A dual-mono design, it has separate power supplies for the preamplifier and each of the power amplifier channels, with one transformer dedicated to the preamp to ensure the delicate signals passing through that section of the amplifier aren’t affected by the demands of the high power output stages. There’s also a dedicated supply for the microprocessor controlling volume adjustment, input selection and so on, ensuring no noise from the control section finds its way in to the audio path. Pure analogue Another important part of the noise-reduction here is the fact that the PM-10 is a purely analogue amplifier: many rival designs are today including digital-to-analogue conversion, or adopting digital amplification and volume control, but the Marantz keeps things as clean and simple as possible with its highly-developed all-analogue design. Why? Well, though it may seem convenient to have a DAC in the amplifier, digital circuitry is, by its very nature, noisy (in the electrical sense) and can interfere with the delicate analogue signals passing through the amp. That’s why Marantz chooses to design its Premium Series range with any digital-to-analogue conversion in its Super Audio CD or network music players, keeping its amplifiers as pure and clean as possible.  What’s more, to make the most of that purity of design, the PM-10 has also been designed with the option of working in ‘Purest Mode’: when engaged, this deactivates any superfluous circuits, giving the signal the cleanest possible path through the amplifier. There’s also a Power Amp Direct input, taking the signal straight from the input section to the power stage to let the unit work as a pure power amplifier. Fully balanced, from input to final power section The benefits of balanced audio layout have long been understood: unlike a conventional layout, one half of the signal path is in the ground plane of either an amplifier or a cable, balanced working uses two conductors or paths – one for positive, the other for negative – and an entirely separate ground to protect them. The benefit in cables is that any external interference will affect both positive and negative conductors, but since the signals they are carrying are the mirror image of each other, they will mutually cancel out any effect – which is why such cables are widely used in pro audio and studio applications, where sources of hum are common, and the longer cable runs involved makes them particularly prone to picking up interference.  The same is true when balanced working is applied to audio circuitry: not only does this mirror-imaging of the layout, in which identical components are handling the positive and negative ‘legs’ of the signal, cancel out any potential interference, it also means any noise or errors introduced in the circuitry will also be cancelled out.  An additional benefit is that balanced working also uses stronger signals than unbalanced designs, simple because both halves of the circuit are active – rather than just having one half pushing and the other just providing the ground, here we have a ‘push pull’ operation. And a stronger signal means one less susceptible to any outside interference: the more signal there is, the less obvious any noise will be. The PM-10 uses a fully balanced layout, from the input section all the way through to the final power amplifier section: it has two sets of balanced inputs, and also conventional unbalanced line-level inputs (plus a high-quality phono stage), the signal from these inputs being converted to balanced working before being passed through the amplifier. By keeping the signal balanced all the way through the amplifier, and combining that with optimised power supply design, the Marantz engineers are able to achieve maximum noise rejection throughout the audio path, and the highest possible signal purity. Balanced, bridged power amplification For the PM-10, Marantz wanted the purest possible sound, plus the power and dynamics to drive and control some of the world’s most demanding speakers. To achieve this, they continued the balanced working found in the preamp stage right the way through to the power amplifier stage to its speaker outputs, and also adopted bridged working to develop the power required while maintaining that balanced design. This True Balanced Concept realizes a ground-free signal management from the input to the output. What is the bridged amplifier about? In a conventional amplifier, one speaker is driven by the positive and negative part of one single output stage per channel, but a bridged amplifier does things differently, using two separate amplifier stages per channel to drive one speaker. To greatly simplify things: one amp pushes the speaker cones and domes, while the other pulls them back.  That much greater control over the way the speaker drive units behave, in that the amplifier can make them start moving, and stop, much more precisely is very important for definition and the ‘speed’ of the system, meaning it can play music with much better rhythmic and spatial controls, not to mention making voices and instruments sound more realistic. In the PM-10, the bridged amplifiers in the power output stage – a total of four amplifier channels – allow this control to be combined with huge power output: it delivers 2x200W into an 8ohm load, and can easily cope with demanding speakers or those whose impedance varies widely with frequency, thanks to a 2x400W output into 4ohms. That ensures not just the power to drive even big, power-hungry speakers to high levels while keeping the sound clean and distortion-free, but also the ‘grip’ to make sure those speakers are doing just what the music demands. It’s all made possible by the use of the latest switching amplifier technology, allowing a compact integrated amplifier design while still fulfilling Marantz performance requirements. Carefully selected components Marantz has long built a reputation for choosing the best-possible components for its Premium Series products – and if it can’t find what it wants, it designs and builds the required part. That thinking informed the design of the Hyper Dynamic Amplifier Module (or HDAM): unhappy with the audio quality available from ‘amplifier on a chip’ IC components, the company designed its own alternative, in the form of a miniature amplifier module built entirely of discrete components. As with all such design decisions, the engineers selected and optimised the HDAM through extensive listening in dedicated Marantz facilities in Europe and Japan, and since it was introduced this component has both been developed and also found its way into an ever-wider range of products. In the PM-10, the latest-generation HDAM SA3 is used, as part of a current feedback topology designed for the widest possible frequency and dynamic ranges – just the thing for today’s ultra-high-resolution audio formats – and aided by ultra-fast custom made block capacitors for the fastest possible response to demands for high current. The same current feedback design is applied to the phono stage in the PM-10, which is configurable for use with either moving coil or moving magnet cartridges for the best possible playback of those favourite LPs. This isn’t a case of Marantz responding to the current ‘vinyl revival’: over the years, while developing and refining its digital competences, the company has remained totally committed to the excellent sound possible from LPs and singles. It has long been fitting its products with high-quality phono stages – even before vinyl came back into fashion! Built to perform Like the partnering SA-10 Super Audio CD/CD player/DAC, the PM-10 is constructed to the highest possible standards, with a double-layered copper-plated chassis for excellent rejection of mechanical and electrical interference, and casework constructed from thick, heavy, non-magnetic aluminium panels. Both products also sit on aluminium die-cast feet. Even the speaker terminals here are special: even the highest-aiming rivals tend to use components bought in from third party companies, or designed as much for ‘show’ as ‘go’, but the PM-10 has newly-designed and exclusive Marantz SPKT-100+ terminals, made from high-purity solid copper. In common with every other design and engineering decision behind this new reference class amplifier, those terminals are there for one very simple reason:  ‘Because Music Matters’  

PM-10 Integrated amplifier The new reference class Integrated amplifier Four switching power amplifier channels in bridged mode (two per channel) for maximum grip and drive  True Balanced Concept from input to speaker to realise ground-free signal management Massive power: 200Wpc per channel into 8ohms, and 400Wpc into 4ohms Easy driving of a wide range of speakers Wide-ranging dynamic ability thanks to instant high-current power supply Fully balanced throughout: both preamplifier and power amplifiers Marantz Hyper Dynamic Amplifier Modules (HDAM) in preamp stage Dual mono power amplifier configuration Separate power supplies for preamplifier and control processor, and for each power amp channel Discrete phono stage for moving coil and moving magnet cartridges in its own shielded case. High-quality construction with double-layer chassis, 5mm thick aluminium top lid, solid aluminium front, copper plated chassis and high-purity copper speakers terminals Double thickness copper PCB for the output section and main power supplies Amplifiers are at the core of Marantz history: its very first product was a high-quality preamplifier designed to make the most of the then-new LP record format. And with a history stretching all the way to that ground-breaking Audio Consolette – which Saul B Marantz started manufacturing in 1952, and which soon became the first real Marantz product, the Model 1 preamplifier – , it’s no surprise that the company’s very latest Premium Series model, the PM-10, is an integrated amplifier built to set new standards with all of today’s music formats. In fact, this massively powerful integrated amplifier is constructed more like a high-end separate preamplifier and a pair of monobloc power amps, but all in one beautifully finished case, designed both to maximise performance and create a strong visual statement. Making an integrated amplifier with dual monobloc design fitting in a normal size cabinet is made possible by the use of a stereo switching amplifier. Its aim? To reveal the maximum musical involvement from everything from LPs to the latest high-resolution audio files and beyond, and with all the power and control required to drive the most demanding loudspeakers, allowing them to perform at their best. Optimised design To achieve such quality, while still delivering class-leading power, means optimising each section of the amplifier for its task, just as would be done in a design using a separate preamplifier and monobloc power amps.  Commonly, amplifiers use a single transformer, with separate power supply regulation for the preamplifier and power amplifier sections; the PM-10 takes things much further. A dual-mono design, it has separate power supplies for the preamplifier and each of the power amplifier channels, with one transformer dedicated to the preamp to ensure the delicate signals passing through that section of the amplifier aren’t affected by the demands of the high power output stages. There’s also a dedicated supply for the microprocessor controlling volume adjustment, input selection and so on, ensuring no noise from the control section finds its way in to the audio path. Pure analogue Another important part of the noise-reduction here is the fact that the PM-10 is a purely analogue amplifier: many rival designs are today including digital-to-analogue conversion, or adopting digital amplification and volume control, but the Marantz keeps things as clean and simple as possible with its highly-developed all-analogue design. Why? Well, though it may seem convenient to have a DAC in the amplifier, digital circuitry is, by its very nature, noisy (in the electrical sense) and can interfere with the delicate analogue signals passing through the amp. That’s why Marantz chooses to design its Premium Series range with any digital-to-analogue conversion in its Super Audio CD or network music players, keeping its amplifiers as pure and clean as possible.  What’s more, to make the most of that purity of design, the PM-10 has also been designed with the option of working in ‘Purest Mode’: when engaged, this deactivates any superfluous circuits, giving the signal the cleanest possible path through the amplifier. There’s also a Power Amp Direct input, taking the signal straight from the input section to the power stage to let the unit work as a pure power amplifier. Fully balanced, from input to final power section The benefits of balanced audio layout have long been understood: unlike a conventional layout, one half of the signal path is in the ground plane of either an amplifier or a cable, balanced working uses two conductors or paths – one for positive, the other for negative – and an entirely separate ground to protect them. The benefit in cables is that any external interference will affect both positive and negative conductors, but since the signals they are carrying are the mirror image of each other, they will mutually cancel out any effect – which is why such cables are widely used in pro audio and studio applications, where sources of hum are common, and the longer cable runs involved makes them particularly prone to picking up interference.  The same is true when balanced working is applied to audio circuitry: not only does this mirror-imaging of the layout, in which identical components are handling the positive and negative ‘legs’ of the signal, cancel out any potential interference, it also means any noise or errors introduced in the circuitry will also be cancelled out.  An additional benefit is that balanced working also uses stronger signals than unbalanced designs, simple because both halves of the circuit are active – rather than just having one half pushing and the other just providing the ground, here we have a ‘push pull’ operation. And a stronger signal means one less susceptible to any outside interference: the more signal there is, the less obvious any noise will be. The PM-10 uses a fully balanced layout, from the input section all the way through to the final power amplifier section: it has two sets of balanced inputs, and also conventional unbalanced line-level inputs (plus a high-quality phono stage), the signal from these inputs being converted to balanced working before being passed through the amplifier. By keeping the signal balanced all the way through the amplifier, and combining that with optimised power supply design, the Marantz engineers are able to achieve maximum noise rejection throughout the audio path, and the highest possible signal purity. Balanced, bridged power amplification For the PM-10, Marantz wanted the purest possible sound, plus the power and dynamics to drive and control some of the world’s most demanding speakers. To achieve this, they continued the balanced working found in the preamp stage right the way through to the power amplifier stage to its speaker outputs, and also adopted bridged working to develop the power required while maintaining that balanced design. This True Balanced Concept realizes a ground-free signal management from the input to the output. What is the bridged amplifier about? In a conventional amplifier, one speaker is driven by the positive and negative part of one single output stage per channel, but a bridged amplifier does things differently, using two separate amplifier stages per channel to drive one speaker. To greatly simplify things: one amp pushes the speaker cones and domes, while the other pulls them back.  That much greater control over the way the speaker drive units behave, in that the amplifier can make them start moving, and stop, much more precisely is very important for definition and the ‘speed’ of the system, meaning it can play music with much better rhythmic and spatial controls, not to mention making voices and instruments sound more realistic. In the PM-10, the bridged amplifiers in the power output stage – a total of four amplifier channels – allow this control to be combined with huge power output: it delivers 2x200W into an 8ohm load, and can easily cope with demanding speakers or those whose impedance varies widely with frequency, thanks to a 2x400W output into 4ohms. That ensures not just the power to drive even big, power-hungry speakers to high levels while keeping the sound clean and distortion-free, but also the ‘grip’ to make sure those speakers are doing just what the music demands. It’s all made possible by the use of the latest switching amplifier technology, allowing a compact integrated amplifier design while still fulfilling Marantz performance requirements. Carefully selected components Marantz has long built a reputation for choosing the best-possible components for its Premium Series products – and if it can’t find what it wants, it designs and builds the required part. That thinking informed the design of the Hyper Dynamic Amplifier Module (or HDAM): unhappy with the audio quality available from ‘amplifier on a chip’ IC components, the company designed its own alternative, in the form of a miniature amplifier module built entirely of discrete components. As with all such design decisions, the engineers selected and optimised the HDAM through extensive listening in dedicated Marantz facilities in Europe and Japan, and since it was introduced this component has both been developed and also found its way into an ever-wider range of products. In the PM-10, the latest-generation HDAM SA3 is used, as part of a current feedback topology designed for the widest possible frequency and dynamic ranges – just the thing for today’s ultra-high-resolution audio formats – and aided by ultra-fast custom made block capacitors for the fastest possible response to demands for high current. The same current feedback design is applied to the phono stage in the PM-10, which is configurable for use with either moving coil or moving magnet cartridges for the best possible playback of those favourite LPs. This isn’t a case of Marantz responding to the current ‘vinyl revival’: over the years, while developing and refining its digital competences, the company has remained totally committed to the excellent sound possible from LPs and singles. It has long been fitting its products with high-quality phono stages – even before vinyl came back into fashion! Built to perform Like the partnering SA-10 Super Audio CD/CD player/DAC, the PM-10 is constructed to the highest possible standards, with a double-layered copper-plated chassis for excellent rejection of mechanical and electrical interference, and casework constructed from thick, heavy, non-magnetic aluminium panels. Both products also sit on aluminium die-cast feet. Even the speaker terminals here are special: even the highest-aiming rivals tend to use components bought in from third party companies, or designed as much for ‘show’ as ‘go’, but the PM-10 has newly-designed and exclusive Marantz SPKT-100+ terminals, made from high-purity solid copper. In common with every other design and engineering decision behind this new reference class amplifier, those terminals are there for one very simple reason:  ‘Because Music Matters’  

 Designed for the aspiring music enthusiast, the Denon PMA-600NE is the superior choice for those who want to build their first 2-channel HiFi system. Powered by the Denon Advanced High Current (AHC) single-push-pull circuit power amplifier, the PMA-600NE integrated amplifier delivers 70 Watts (4ohm, 1kHz, THD: 0.7%) of power-per-channel. Easily connect both analogue and digital sources including your turntable to the built-in phono pre-amp. Listen to your favourite high-resolution audio content with the 192kHz/24bit D/A converter or connect via Bluetooth to stream nearly unlimited songs. The PMA-600NE provides exceptional sound quality that balances high power with delicate, musical details. UPGRADE TO ADVANCED DIGITAL AUDIO REPRODUCTION HIGHLIGHTS YOUR BENEFITS 70 Watts per channel power output (4ohm, 1kHz, THD: 0.7%) Get the maximum performance to drive your favourite loudspeakers Advanced High Current (AHC) single-push-pull circuit power amplifier Wide bandwidth captures everything from deep bass to detailed highs Bluetooth support With antenna inside the unit, actively pair your smart phone to the PMA-600NE via Bluetooth to stream music Includes two digital Optical inputs for your TV or digital device Automatically detects the signal input from your TV and outputs elevated sound Built-in 192kHz/24bit D/A converter Experience high-resolution audio playback to enjoy the highest quality of your favourite songs Micro-processor with Stop Mode benefit Protects audio signal from external noise during playback Analogue Mode for pure audio reproduction Divided circuitry includes a Bluetooth OFF option to help remove any influence from any digital interruptions while listening to analogue audio signal High performance MM phono equalizer amp Connect your turntable and enjoy vinyl tracks Deeper bass Enjoy rich, evenly dispersed bass with a subwoofer output

 Designed for the aspiring music enthusiast, the Denon PMA-600NE is the superior choice for those who want to build their first 2-channel HiFi system. Powered by the Denon Advanced High Current (AHC) single-push-pull circuit power amplifier, the PMA-600NE integrated amplifier delivers 70 Watts (4ohm, 1kHz, THD: 0.7%) of power-per-channel. Easily connect both analogue and digital sources including your turntable to the built-in phono pre-amp. Listen to your favourite high-resolution audio content with the 192kHz/24bit D/A converter or connect via Bluetooth to stream nearly unlimited songs. The PMA-600NE provides exceptional sound quality that balances high power with delicate, musical details. UPGRADE TO ADVANCED DIGITAL AUDIO REPRODUCTION HIGHLIGHTS YOUR BENEFITS 70 Watts per channel power output (4ohm, 1kHz, THD: 0.7%) Get the maximum performance to drive your favourite loudspeakers Advanced High Current (AHC) single-push-pull circuit power amplifier Wide bandwidth captures everything from deep bass to detailed highs Bluetooth support With antenna inside the unit, actively pair your smart phone to the PMA-600NE via Bluetooth to stream music Includes two digital Optical inputs for your TV or digital device Automatically detects the signal input from your TV and outputs elevated sound Built-in 192kHz/24bit D/A converter Experience high-resolution audio playback to enjoy the highest quality of your favourite songs Micro-processor with Stop Mode benefit Protects audio signal from external noise during playback Analogue Mode for pure audio reproduction Divided circuitry includes a Bluetooth OFF option to help remove any influence from any digital interruptions while listening to analogue audio signal High performance MM phono equalizer amp Connect your turntable and enjoy vinyl tracks Deeper bass Enjoy rich, evenly dispersed bass with a subwoofer output

The L-509X integrates the features of both a high quality separate amplifier and a high performance integrated amplifier into one product. The goal of creating an ideal integrated amplifier, initiated by LUXMAN with the launch of the L-509fSE in 2002, has now been advanced with the development of the L-509X. The L-509X integrated amplifier is equipped with many desirable features, such as the New LECUA1000 and a discretely configured buffer circuit in the output stage of the pre-amplifier circuit. LUXMAN’s ODNF (Only Distortion Negative Feedback) original amplifier feedback circuit and a power supply with independent left and right channel blocking capacitors are intrinsic to this design, as well as many components used only in high end models, ensuring high-quality audio reproduction. The design of the L-509X incorporates the cream of LUXMAN's proprietary technologies, breaking new ground and creating the ultimate expression of “separates in a single unit”.ODNF* Version 4.0 - innovative amplification feedback circuitAn integral part of the design of the L-509X is LUXMAN's original ODNF* amplification feedback circuit, featuring a high-speed primary slew rate, an ultra-wide bandwidth and a low level of distortion that is achieved by feeding back only the distorted components of the audio signal from the output of the amplification circuit. The L-509X is equipped with the latest Version 4.0 ODNF providing a dramatic enhancement of accuracy in distortion detection due to the triple-paralleled first stage error detection circuit. Lower impedance and a higher signal to noise ratio have been achieved due to the paralleled first stage and Darlington equipped second stage amplification circuit. A 3-stage Darlington circuit and a 4-parallel push-pull structure is used for the output stage, similar to the M-700u power amplifier. This achieves output at 120W+120W(8Ω) and 220W+220W(4Ω), enabling the L-509X to drive speakers powerfully with rich dynamics and full expression. *ODNF stands for “Only Distortion Negative Feedback”.Chassis structure exemplifies excellence in function and designThe L-509X features a top panel with a beautiful hair-line finish and widened venting to improve heat dissipation. The loop-less chassis structure restricts any increase in ground impedance. Analog level meters, illuminated with white LEDs, add to the elegant and stylish appearance. New LECUA*1000 computerized attenuatorLUXMAN's New LECUA1000 is at the heart of the preamp section and the volume adjustment control of the L-509X. This computerized attenuator is integrated with the amplification circuit, a feature integral to the high-end LUXMAN C-900u control amplifier. LECUA provides an ideal level control system which allows smooth and fine adjustment of the volume over 88 steps, thereby minimising the deterioration of audio quality at any point of the volume adjustment range. An advancement of the New LECUA1000 is the 3D design layout. The attenuator circuit board is directly connected to the amplification circuit board. Signal routing has been minimized andefficiency has been successfully enhanced. In addition, this design is extremely resistant to external vibration and eliminates changes in audio quality over the volume control range. The robust nature of this system ensures longevity and durability. *LECUA stands for “Luxman Electronically Controlled Ultimate Attenuator” Spec Rated output    120W + 120W (8Ω), 220W + 220W (4Ω) Input sensitivity/input impedance    PHONO (MM): 2.5mV/47kΩ PHONO (MC): 0.3mV/100Ω LINE: 180mV/47kΩ BAL.LINE: 180mV/55kΩ MAIN-IN: 1.1V/47kΩ Output voltage    REC OUT: 180mV, PRE-OUT: 1V Frequency response    PHONO: 20Hz to 20kHz (±0.5dB) LINE: 20Hz to 100kHz (within -3dB) Total harmonic distortion    0.007% or less (8Ω, 1kHz) 0.06% or less (8Ω, 20Hz to 20kHz) S/N ratio (IHF-A)    PHONO (MM): 91dB or more PHONO (MC): 75dB or more LINE: 105dB or more Volume adjustment    New LECUA1000 Amplification circuit    ODNF 4.0 Output configuration    Bipolar 4-parallel push-pull Damping factor    370 Max. amount of tone control    BASS: ±8dB at 100Hz TREBLE: ±8dB at 10kHz Power supply    230V~(50Hz) /115V~(60Hz) Power consumption    380W 150W (under no signal), 0.5W (at standby) External dimensions    440(W) x 193(H) x 463(D) mm front side knob of 20mm and rear side terminal of 37mm included in depth Net weight    29.3kg (main unit) Accessories    Remote control (RA-17A) Power cable Speaker terminal Supported Y-lug terminal dimension    Width of part a: 16mm or less Width of part b: 7mm or more * Connection may not be performed depending on the shape of the Y-lug terminal.  

Περιλαμβάνεται: Advance Acoustic X-FTB02New Advance Acoustic integrated amplifiers X-i105 has a sober and elegant presentation.It has numerous possibilities for both analog and digital use, benefitting from the latest technical innovations.Combined with the best components available at this time, they allowed to the listening, an exceptional rendering for dynamics without agressiveness,but reproducing the details of the music.The « Hi Bias » function allows it to supply easily most of the loudspeakers sold on the market.Its complete remote control device will make it easier to use.

This integrated amplifier is a new design, combining the highest performance with the cost and quality benefits made possible by our state-of-the-art production facilities. The PI-1 delivers 50 watts per channel (8 Ω).The Electrocompaniet PI-1 and PI-2 are our new fully balanced entry-level stereo integrated amplifiers. In the development of these amplifiers the focus has been to maintain the operating principles and sound quality of the classic line amplifiers, and at the same time reduce manufacturing costs.To achieve this we have utilized modern surface mount technology (SMT) and optimized the amplifiers for our modern SMT production line. The result is modern looking high performance amplifiers with superb control and dynamics.The newly developed protection circuitry protects the PI-1 and PI-2 against high temperature, DC offset and short circuit at the output. This protection has no negative influence on the sound quality what so ever. We have even removed the relay at the output to reduce the number of contact points between the amplifier and the loudspeakers.Both the PI-1 and PI-2 features the same digital volume control as used in the EC4.8/EC4.9 preamplifiers. The bright and clear VFD-display is readable from the listing position and shows the input source and volume setting. Both amplifiers have two fully balanced (XLR) inputs and two single ended (RCA) inputs. Volume and input sources can easily be navigated via the four navigator buttons on the front panel, or from the remote control.The PI-1 is equipped with a big linear power supply with a 300VA toroidal transformer and a capacitor storage bank of 40.000 uF. Χαρακτηριστικά:Ολοκληρωμένος ενισχυτής, ισχύος 2 x 50 WRMS στα 8Ω, 2 x 75 WRMS στα 4Ω,2 x 100 WRMS στα 2Ω, Max Peak Current >50A, λειτουργία σε τάξη AΕίσοδοι:1 x Stereo XLR (2 x balanced), 1 x Stereo RCA (2 x Single Ended)Ασύρματο τηλεχειριστήριοΔιαστάσεις (W x D x H): 420 x 340 x 77 mmΚαθαρό Βάρος: 6 kg​

Essentially the same design as the PI-1, but with a more powerful power supply. A lot of effort was put into developing an amplifier that delivers high-end performance at a modest price point. The PI-2 has a rated output of 100 watts per channel (8 Ω).The Electrocompaniet PI-1 and PI-2 are our new fully balanced entry-level stereo integrated amplifiers. In the development of these amplifiers the focus has been to maintain the operating principles and sound quality of the classic line amplifiers, and at the same time reduce manufacturing costs. To achieve this we have utilized modern surface mount technology (SMT) and optimized the amplifiers for our modern SMT production line. The result is modern looking high performance amplifiers with superb control and dynamics.The newly developed protection circuitry protects the PI-1 and PI-2 against high temperature, DC offset and short circuit at the output. This protection has no negative influence on the sound quality what so ever. We have even removed the relay at the output to reduce the number of contact points between the amplifier and the loudspeakers.Both the PI-1 and PI-2 features the same digital volume control as used in the EC4.8/EC4.9 preamplifiers. The bright and clear VFD-display is readable from the listing position and shows the input source and volume setting. Both amplifiers have two fully balanced (XLR) inputs and two single ended (RCA) inputs. Volume and input sources can easily be navigated via the four navigator buttons on the front panel, or from the remote control. The PI-2 is equipped with a oversized linear power supply with a 400VA toroidal transformer and a capacitor storage bank of 80.000 uF. Specifications:Input impedance: Balanced input 47KohmOutput impedance: 0.03 ohmNoise floor: 20 - 20 kHz < - 100 dBFrequency response - 3 dB 1 - 200 kHzChannel separation: > 120 dBTHD + N 20 - 20 kHz < 0.006%Maximum peak current: > 50ADamping factor: 8 ohm load >250Rated output power: THD = 0.2% into 8 ohm: 2 x 100 Winto 4 ohm: 2 x 150 Winto 2 ohm: 2 x 220 W Toroid transformer : 400VA   Capacitor storage bank: 80.000uFDimensions W x D x H: 420 x 340 x 77 mm  Weight: 10 kgPower consumption: No load or signal 100 WInputs: 2 x 2 Channel Balanced (XLR)  2 x 2 Channel Single EndedControl ports: NoneOutputs: Loudspeakers

Essentially the same design as the PI-1, but with a more powerful power supply. A lot of effort was put into developing an amplifier that delivers high-end performance at a modest price point. The PI-2 has a rated output of 100 watts per channel (8 Ω).The Electrocompaniet PI-1 and PI-2 are our new fully balanced entry-level stereo integrated amplifiers. In the development of these amplifiers the focus has been to maintain the operating principles and sound quality of the classic line amplifiers, and at the same time reduce manufacturing costs. To achieve this we have utilized modern surface mount technology (SMT) and optimized the amplifiers for our modern SMT production line. The result is modern looking high performance amplifiers with superb control and dynamics.The newly developed protection circuitry protects the PI-1 and PI-2 against high temperature, DC offset and short circuit at the output. This protection has no negative influence on the sound quality what so ever. We have even removed the relay at the output to reduce the number of contact points between the amplifier and the loudspeakers.Both the PI-1 and PI-2 features the same digital volume control as used in the EC4.8/EC4.9 preamplifiers. The bright and clear VFD-display is readable from the listing position and shows the input source and volume setting. Both amplifiers have two fully balanced (XLR) inputs and two single ended (RCA) inputs. Volume and input sources can easily be navigated via the four navigator buttons on the front panel, or from the remote control. The PI-2 is equipped with a oversized linear power supply with a 400VA toroidal transformer and a capacitor storage bank of 80.000 uF. Specifications:Input impedance: Balanced input 47KohmOutput impedance: 0.03 ohmNoise floor: 20 - 20 kHz < - 100 dBFrequency response - 3 dB 1 - 200 kHzChannel separation: > 120 dBTHD + N 20 - 20 kHz < 0.006%Maximum peak current: > 50ADamping factor: 8 ohm load >250Rated output power: THD = 0.2% into 8 ohm: 2 x 100 Winto 4 ohm: 2 x 150 Winto 2 ohm: 2 x 220 W Toroid transformer : 400VA   Capacitor storage bank: 80.000uFDimensions W x D x H: 420 x 340 x 77 mm  Weight: 10 kgPower consumption: No load or signal 100 WInputs: 2 x 2 Channel Balanced (XLR)  2 x 2 Channel Single EndedControl ports: NoneOutputs: Loudspeakers

The Elicit-R has been designed and engineered to the highest standard. The Elicit-R will deliver the best possible audio performance whilst remaining simple to use and easy to setup. Our recent development work in amplifier design circuitry has allowed us to further advance the Elicit-Rperformance by using new and improved power amplifier circuits (based around the hugely successful Rega Brio-R amplifier).Combined with FET discrete line level pre-amplifiers and a programmable stepped attenuator volume control, ensuring greater levels of performance and control over the delivery of power. The Elicit-R is supplied with the new Solaris system remote handset offering full control over this and all of the current ‘R’ range of electronics.Χαρακτηριστικά:105 Watts per channel into 8127 Watts per channel into 6162 Watts per channel into 4Input sensitivity for 105 Watts into 8Line inputs (input 1 switch set to line) 1-5 and record - 196mV load 10KPhono (input 1 switch set to phono) - 2mV Load 47K in parallel with 220pFDirect input - 760mV Load 50KPower amplifier gain - 31.6dBRecord output - 196mV for rated inputsPre-amplifier output - 760mV for rated inputsDimensions: W 432mm x D 325mm x H 82mmWeight - 13kg 

The Osiris is the culmination of 32 years’ experience in solid-state amplifier development. A no compromise, super high performance, 162 Watts into 8 Ohms (250 Watt 4 Ohms), dual mono amplifier housed in a custom Rega CNC machined aluminium case. Designed around "minimalist" high gain power amplifier and "passive pre-amplifier" circuit topology, a passive volume control and a single stage of power amplification between the input and the speakers, the Osiris offers unrivalled performance and build quality.All these features combine to create the supreme level of performance found in the Osiris and provide a perfect partner for our Isis CD player. We hope that you enjoy this product as much as we have enjoyed creating it.Προδιαγραφές:Thermal cut outElectronic thermal DC protectionShort Circuit ProtectionGalvanically isolated power supplyNichicon Audio Grade CapacitorsCascoded differential inputDirect InputHigh Specification mains leadCustom aluminium Osiris remote controlΧαρακτηριστικά:Power output 162 Watts per channel RMSInput sensitivity for 160 Watts into 8Ω 250 Watts into 4ΩAmplifier gain: Direct input 44dBRecord output 215mV into 100KFrequency Response 10Hz (-1.7dB point)THD + Noise Less than 0.05%Power consumption 560W at 115/230VDimensions: W 434mm x D 350mm x H 122mmWeight 25.6kgs