Πικάπ
Το ποιό θρυλικό πικάπ της Rega, πολυβραβευμένου πέντε φορές από το ειδικό περιοδικό What Hi-Fi και προϊόν της χρονιάς (RP3) δεν επρόκειτο ποτέ να είναι ένας εύκολος στόχος για τους ανταγωνιστές μας. Χρειάστηκε μια ομάδα σχεδιαστές με επικεφαλής τον Roy Gandy και δύο χρόνια για να αναπτύξει το ολοκαίνουριο «Rega 3» με νέο σχεδιασμό. Η ομάδα μας έχει εργαστεί ακούραστα για να βελτιώσει κάθε πτυχή αυτού του πικάπ που προσφέρει βελτιωμένη εργονομία, χρηστικότητα και πρώτα απ 'όλα, ηχητικό performance. Το νέο σας προσφέρει νέο επίπεδο στην ακρόαση.Είναι πραγματικά μια νέα προσέγγιση για πικάπ του 2017 Το πικάπ έρχεται χωρίς κεφαλή, επικοινωνήστε μαζί μας για να σας προτείνουμε κεφαλές που ταιριάζουν Χαρακτηριστικά: Πικάπ χειροποίητης κατασκευής Τεχνολογία Πλατό – Υποπλατό με σύστημα Double Brace για μηδενικούς συντονισμούς Σύγχρονο μοτέρ AC 24V ψυχόμενο και νέα πλακέτα PCB υψηλών προδιαγραφών χαμηλού θορύβου Pulley αλουμινίου για μηδενικό θόρυβο και καλύτερη ακρίβεια στροφών Ειδικό πηγάδι μηδενικών ανοχών (new patent) Φ 11mm Χειροκίνητη επιλογή ταχυτήτων 33 1/3 rpm, 45 rpm Πλατό βελτιωμένης ακριβείας τύπου float glass ‘Optiwhite’ πάχους 12mm Χειροποίητος βραχίονας RB330 μηδενικών τριβών (new patent) Προστατευτικό καπάκι από διάφανο plexiglass Νέου τύπου στήριξη 3 σημείων για τέλεια ηχητική απομόνωση Εργονομικός διακόπτης On/Off κάτω από το πικάπ Διαθέσιμα φινιρίσματα: Black Gloss, White Gloss Διαστάσεις (W x H x D): 450.0 mm x 117.0 mm x 360.0 mm Βάρος: 7 kg
mmf Mark1 Turntable Sophisticated Sound at an Entry-Level PriceAlthough the Music Hall Mark1 occupies a lower price point than our famous mmf 2.3, the engineering is substantially the same. Roy Hall’s signature sound can be heard in the entire Music Hall range, and the Mark1 is no exception!All-New TonearmOur new all-aluminum, S-shaped design, with a precision aluminum headshell, allows us to achieve the highest possible level of rigidity and internal damping. The tonearm flange is CNC-machined, which allows for accurate mounting of the tonearm to the heavy chassis. VTA is fully adjustable, and it’s a feature almost never seen in this price-range.This no-compromises solution enables us to achieve that signature Music Hall sound. The magnetic anti-skating feature is quite a luxurious one. And the factory-set pre-adjusted and fixed counterweight makes setup a breeze.CartridgeWe have taken care to mount a cartridge that perfectly matches the characteristics of the tonearm. The Mark1 uses a high quality, super fast and dynamic low mass cartridge from one of the leading cartridge manufacturers in Europe, the Ortofon OM 5E. This creates a beautiful, full-bodied sound, which until now has been impossible to achieve in a budget turntable.Feature List:extremely quiet belt drive, 2-speed turntablealuminum die-cast platter33 1⁄3 and 45rpmbuilt-in phono amp or direct line outstatic balanced S-shaped tonearm w/detachable headshellAudio Technica AT3600L moving-magnet cartridge suppliedanti-skating control for increased stereo balance+/- 10% adjustable pitch controldust cover includeddesigned and developed in the US and Francew17.7 x d13.8 x h5.7in12lbs (package)low noise, belt-drive designhigh-gloss piano lacquer finish or walnut veneerhigh quality 8.6” S-shape aluminium tonearmprecision aluminium headshell and VTA adjustmentdynamically balanced and damped counterweightmagnetic anti-skatingAC synchronous motor for superior speed stabilityhigh quality Ortofon OM 5E cartridge properly aligned and mountedprecision stainless steel main bearing sheathed in Tef-lon® for noise-free fluid operationdynamically balanced alloy platter with soft felt mathigh quality gold RCA connectorsspecial vibration-damping adjustable feetdust cover and 45rpm adaptor included
Fusing Technics' traditional analogue and leading-edge digital technologies Launched in 2016, the SL-1200G combined Technics‘ traditional analogue technology and advanced digital technology, while redesigning parts throughout. Its outstanding performance literally rocked the hi-fi market and redefined the reference for direct-drive turntables. Parts that were inherited from the SL-1200G were newly developed for the SL-1210GR, beginning with the coreless direct-drive motor and precise motor control technology that eliminated the cogging that originated from rotation irregularity, and including a low-vibration, high-rigidity platter and high-sensitivity tonearm. By these measures, the level of performance clearly outperforms the usual standards of its class. The SL-1210GR invites more audio enthusiasts to enjoy music with the rich, robust sound of analogue records. Coreless Direct-Drive Motor Achieving Stable Rotation In 1970, Technics commercialized the world‘s first direct-drive turntable, and the system took the world by storm. Unlike belt-drive and other systems, direct-drive systems rotate the motor at low speed and directly drive the platter, thus providing numerous advantages, such as the almost complete absence of degradation in S/N ratio due to motor vibration and deceleration mechanisms, as well as high reliability over a long period time because of not requiring parts replacement. And in 2016, Technics developed the twin-rotor, surface-facing, coreless direct-drive motor with rotor magnets placed on both sides, thereby eliminating the rotation irregularity of the motor, referred to as "cogging," which was a unique issue for direct-drive systems. This motor was adopted for the SL-1200G, which once again drew a significant response in the hi-fi market. The SL-1210GR inherits the same design philosophy with the new development of a single-rotor, surface-facing, coreless direct-drive motor, resulting in the elimination of cogging. High-precision Motor Control for Ideal Rotation Conditions The rotation control, which verifies and corrects the precision of the motor, uses the latest motor control technology cultivated in the development of Blu-ray disc devices, just as that used by the SL-1200G. Sine waves stored in ROM are used for the control waveforms at constant speed, and this achieves smoother and more stable rotation compared with using the simple sine wave generation with an external coil as in the conventional SL-1200MK5. In addition, the electrical circuitry has had tuning performed so that the newly developed motor of the SL-1210GR achieves maximum performance. The starting torque achieves 2.2 kg x cm with only a single rotor. The same startup time of 0.7 s (at 33 1/3 rpm) as the SL-1200G has been achieved. Pursuing Rigidity and Vibration Damping Characteristics The platter achieves high rigidity and vibration damping characteristics by using a two-layer construction with deadening rubber applied to the entire rear surface of the aluminium die-cast to eliminate the unnecessary resonance that is otherwise relayed to the record, thereby producing clear sound. To increase the inertial mass and reduce vibration, the shape of the aluminium die-cast portion was optimized by simulation. At 2.5 kg (including the rubber mat), the SL-1210GR platter is 0.8 kg heavier than that of the previous SL-1200MK5. Also, the back surface of the platter has strengthening ribs added to improve rigidity. Increasing the surface area of contact with the deadening rubber achieves damping characteristics that are more than twice those of the SL-1200MK5. Tonearm Achieving High Initial-Motion Sensitivity The tonearm tracks the rotation of the record and enables reading with high precision, and the tonearm inherited by Technics is the traditionally used static-balance universal S-shaped tonearm, employing an aluminium pipe with excellent light weight and rigidity for the material of the tonearm pipe. With its gimbal suspension construction, the tonearm bearing section uses a cut-processed housing that employs high-precision bearings, as in the SL-1200G. The high initial-motion sensitivity of 5 mg or less is achieved through manual assembly and adjustment by skilled Japanese artisans. This enables the grooves etched into the records to be accurately traced. In addition, one type of auxiliary weight comes included, and the cartridge can be swapped with a variety of other cartridges to match the music genre or feeling. (Applicable cartridge weight when using the supplied auxiliary weight: 10 - 16.4 g (not including the supplied head shell)) High-quality Terminals for Both Sound and Appearance The turntable uses gold-plated phono terminals for detachable cables, and so a wide variety of cables can be selected. Also, the use of metal shielding construction inside the case reduces the effects of external noise. High-rigidity Body and High-damping Silicon Insulators for Smooth Sound and Isolation from Various Vibrations The SL-1210GR ensures high rigidity by using a body with a two-layered construction solidly unifying the BMC and the aluminium die-cast chassis. For the insulators supporting the body, as with the SL-1200G, the SL-1210GR uses special silicon rubber that ensures both high vibration damping characteristics and long-term reliability. Vibration in the horizontal direction is absorbed by reinforcement with cylindrical tubes using microcell polymers. While inheriting the technology of the SL-1200G, the insulators have had tuning performed specifically for the SL-1210GR. Also, the installation section of the insulators is equipped with a vertical adjustment mechanism using screws. This eliminates the rattle that occurs when the turntable is installed in a rack or the like, and prevents unwanted vibration. In addition, exact horizontal adjustment of the platter and record surface reduces rotation irregularity due to slanting, thereby enabling more stable record playing.
mmf-2.3 Turntable including phono-preamp The Music Hall mmf-2.3 turntable is a 2-speed belt driven audiophile turntable at a budget price.Focus on ComponentsConstructed using high quality components, the mmf-2.3 has been simplified to focus on the critical components: bearing, motor, and tonearm.The Complete PackageThe mmf-2.3 comes complete with a tonearm and music hall spirit cartridge precision mounted. Feature List:special vibration damping adjustable feettop tier 8.6” carbon fiber tonearm with aluminum headshellfully adjustable VTA, azimuth, and dampened arm lift mechanismtonearm features a 4-point gimbal bearing assembly using ultra-precision ABEC bearingslow noise fully manual belt-drive designseparately isolated DC synchronous motor for superior speed stabilitytwo-speed stepped motor pulley for 33 1⁄3 and 45rpmmusic hall Spirit moving-magnet cartridge with replaceable elliptical stylusthe cartridge supplied is properly aligned and mountedhigh precision stainless steel and bronze bearing assembly for quiet, fluid operationhigh quality gold RCA connectors with detachable phono cablefull-size alloy platter and felt matexcellent instruction manualquick and easy to assembledust cover and 45rpm adaptor
mmf-7.3se TurntableThe Music Hall mmf-7.3se turntable is a 2-Speed, belt-driven audiophile turntable employing the unique dual-plinth construction originated by Music Hall.Distinctive DesignThe distinctive design of the mmf-7.3se isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the adjustable tip-toe feet which are mounted on the bottom platform. The motor speed controls, and wiring are isolated on their own platform and completely decoupled from the turntable.Vibration DampingSorbothane hemispheres separate the two platforms and provide additional suspension and vibration damping. The mmf-7.3se is available with or without the Ortofon 2M Bronze cartridge.Feature List:music hall’s unique dual-plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance-damping puckoptional Ortofon 2M Bronze cartridge with a nude fine line stylusthe supplied cartridge is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free, fluid operationnon-resonant acrylic platter with metal screw-on record clamp and soft felt mathigh-quality gold RCA connectors and detachable phono cableadjustable tip-toe feet with anti scratch cupslow-noise, fully-manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly
The Model 6 Classic is a class leading integrated turntable delivering unique sonic performance, engineering excellence and definitive SME craftsmanship. Primary features include a CNC machined chassis made from a unique polymer high density resin material providing high mass, small footprint and superb resonance absorption. Main bearing, spindle and drive pulleys are precision made to the same exact standards as all SME high-end turntables. A new generation highly sophisticated electronic speed control unit provides fine pitch speed adjustment within a wide band range. Machined aluminium finishers fitted to the isolation feet complete the look of the Classic.The Model 6 Classic is complimented with the M2-9R tonearm with extensive features including thumbwheel vertical tracking adjustment, tungsten balance weights, double draw-pin detachable headshell with azimuth adjustment. The tungsten alloy balance weight allows for a maximum centre of gravity shift to balance a greater range of cartridges up to 38 grams and with a direct plug-in head up to 46 grams.Design and engineering excellence built by audio enthusiasts for audio enthusiasts.
mmf Mark1 Turntable Sophisticated Sound at an Entry-Level PriceAlthough the Music Hall Mark1 occupies a lower price point than our famous mmf 2.3, the engineering is substantially the same. Roy Hall’s signature sound can be heard in the entire Music Hall range, and the Mark1 is no exception!All-New TonearmOur new all-aluminum, S-shaped design, with a precision aluminum headshell, allows us to achieve the highest possible level of rigidity and internal damping. The tonearm flange is CNC-machined, which allows for accurate mounting of the tonearm to the heavy chassis. VTA is fully adjustable, and it’s a feature almost never seen in this price-range.This no-compromises solution enables us to achieve that signature Music Hall sound. The magnetic anti-skating feature is quite a luxurious one. And the factory-set pre-adjusted and fixed counterweight makes setup a breeze.CartridgeWe have taken care to mount a cartridge that perfectly matches the characteristics of the tonearm. The Mark1 uses a high quality, super fast and dynamic low mass cartridge from one of the leading cartridge manufacturers in Europe, the Ortofon OM 5E. This creates a beautiful, full-bodied sound, which until now has been impossible to achieve in a budget turntable.Feature List:extremely quiet belt drive, 2-speed turntablealuminum die-cast platter33 1⁄3 and 45rpmbuilt-in phono amp or direct line outstatic balanced S-shaped tonearm w/detachable headshellAudio Technica AT3600L moving-magnet cartridge suppliedanti-skating control for increased stereo balance+/- 10% adjustable pitch controldust cover includeddesigned and developed in the US and Francew17.7 x d13.8 x h5.7in12lbs (package)low noise, belt-drive designhigh-gloss piano lacquer finish or walnut veneerhigh quality 8.6” S-shape aluminium tonearmprecision aluminium headshell and VTA adjustmentdynamically balanced and damped counterweightmagnetic anti-skatingAC synchronous motor for superior speed stabilityhigh quality Ortofon OM 5E cartridge properly aligned and mountedprecision stainless steel main bearing sheathed in Tef-lon® for noise-free fluid operationdynamically balanced alloy platter with soft felt mathigh quality gold RCA connectorsspecial vibration-damping adjustable feetdust cover and 45rpm adaptor included
Το best buy πικάπ της Pro-ject Audio.Ένα οικονομικό πικάπ με εκπληκτικό ήχο,σε πολλαπλούς χρωματισμούς!Το νέο DEBUT Carbon DC έχει σχεδιαστεί για να θέσει νέα πρότυπα στην κατηγορία αυτή για την επόμενη δεκαετία.Μια σεβαστή πηγή, ενώ η ζήτηση για το καλό πικάπ αυξάνεται και πάλι!Η πιο εμφανής βελτίωση είναι ένας CARBON βραχίονας,ο οποίος αυξάνει την ακαμψία και μειώνει την ανεπιθύμητη αντήχηση. Το υλικό αυτό συνήθως χρησιμοποιείται ευρέως σε high-end Βραχίονες, αλλά - για λόγους κόστους - δεν χρησιμοποιήθηκε ποτέ σε προϊόντα σε χαμηλότερα επίπεδα τιμών. Μαζί με άλλες βελτιώσεις, όπως μια αύξηση στο μέγεθος και το βάρος του πλατό,ώστε να συνεισφέρουν σε ακόμα ομαλότερη περιστροφή, η συνολική ποιότητα του ήχου βελτιώνεται σημαντικά.Ο σχεδιασμός μετάδοσης κίνησης με ιμάντα, προσφέρει χαμηλά επίπεδα θορύβου και απόλυτη σταθερότητα ταχύτητας, χωρίς ανεπιθύμητους κραδασμούς. Στη συσκευασία εμπεριέχεται καπάκι προστασίας.Χαρακτηριστικά:Speed33, 45 (manual speed change)Drive principlebelt drivePlatter300mm metal with felt matMains bearingstainless steelWow & flutter+/- 0,10%Speed drift+/- 0,80%Signal to noise- 68dBTonearm8,6”, CarbonEffective arm length218,5 mmEffective arm mass6,0 gOverhang18,5mmTracking force10 - 30mNIncluded accessoriesRCA cable, lidPower connection110/120 or 230/240 Volt - 50 or 60 HzDimensions415 x 118 x 320mm (WxHxD) lid closedWeight5,6 kg net
The Model 12A has been designed for those who would prefer to select their own unique combination of phono stage and cartridge for a more personalised listening experience. This introductory model benefits from the finest materials and craftsmanship found throughout the entire SME turntable and tonearm range. Every component part has been precision engineered in-house to the strictest tolerances to contribute to an outstanding musical performance This exciting entry level turntable uses the unique styling of Synergy and comes complete with the highly acclaimed SME 309 tonearm and internal Crystal Cable wiring as standard. The Model 12A is available in three paint finishes of traditional SME Black, Dark Grey and Dark Blue with contrasting detailing.Speed ControlThe electronic control unit uses a high-performance microprocessor, optimised for motor control. Closed loop speed control is implemented using a proportional plus integral (PI) algorithm. Speed ranges are 33.3, 45 & 78 rpm, with fine pitch speed adjustment allowing increments/decrements of +/-0.01% of the selected speed. The electronic control circuitry and power supply unit are housed in an external one-piece CNC machined case. This new design offers complete isolation and support and is the perfect environment for the electronics. Speed selection controls are mounted on the front facia panel with LED indicators.TonearmDesigned to compliment the Model 309 tonearmCrystal Cable WiringThe Model 12A is equipped with a premium grade signal cable from Crystal Cable which is installed inside the tonearm, connected to phono stage and coupled with the cartridge. Pure mono-crystal silver conductors in miniature format. Providing precious metal in its most pure version, lifting the musical performance to a higher level.
Tο νέο Planar 1 είναι το πιο φιλικό προς το χρήστη Rega πικάπ μέχρι σήμερα. Τώρα με προκαθορισμένο τη δύναμη βάρους, με το ολοκαίνουργιο RB110 βραχίονα,το Planar 1 θα εγκατασταθεί μέσα σε λίγα δευτερόλεπτα μετά την απο-συσκευασία του. Απλώς σύρτε το βάρος στο πίσω μέρος του βραχίονα όσο θα πάει, αφαιρέστε το προστατευτικό της βελόνας και αφήστε να γυρίζει το αγαπημένο σας βινύλιο. Κάθε πτυχή του Planar 1 έχει σχεδιαστεί προσεκτικά για να βελτιώσει τις επιδόσεις του. Για πρώτη φορά η κίνηση γίνετε με ένα 24v, (με χαμηλά επίπεδα θορύβου), σύγχρονο κινητήρα για τη μείωση της μεταφοράς κραδασμών σε συνδυασμό με τον ολοκαίνουργιο βραχίονα RB110 .Είναι εξοπλισμένο με ειδικής παραγγελίας έδρανα απο τη Rega με μηδέν τριβή, αυτό είναι πραγματικά ένα νέο πικάπ για το 2016. Χαρακτηριστικά: Τεχνολογία: Πλατό - Υποπλατό Λειτουργία Plug and Play Σύγχρονο μοτέρ AC 24V ψυχόμενο και νέα πλακέτα PCB υψηλών προδιαγραφών χαμηλού θορύβου Pulley αλουμινίου για μηδενικό θόρυβο και καλύτερη ακρίβεια στροφών Ειδικό πηγάδι μηδενικών ανοχών (new patent) Χειροκίνητη επιλογή ταχυτήτων 33 1/3 rpm, 45 rpm Πρεσαριστό πλατό ειδικής κατασκευής πάχους 23mm Χειροποίητος βραχίονας RB110 μηδενικών τριβών (new patent) Εργοστασιακή κεφαλή ΜΜ (Moving Magnet), μοντέλο Carbon Προστατευτικό καπάκι από διάφανο plexiglass Νέου τύπου στήριξη 3 σημείων για τέλεια ηχητική απομόνωση Εργονομικός διακόπτης On/Off κάτω από το πικάπ Διαθέσιμα φινιρίσματα : Black Gloss, White Gloss Διαστάσεις : (W x H x D): 450.0 mm x 115.0 mm x 385.0 mm Βάρος: 5.5 kg Προαιρετικά (optional): αναβάθμιση με το σετ Performance Pack
us-1 TurntableMusic Hall’s US-1 is a convenient, easy to use, and fun turntable. It’s a snap to set up and comes with everything you need to start spinning vinyl.Get Your Groove OnWhether you’re looking to release your inner DJ, or simply discover the joy of spinning vinyl, the us-1 is your answer.A Complete PackageThe us-1 has a built-in phono preamp, cartridge, dust cover, and includes all necessary cables and software required for simple plug and play operation.Feature List:extremely quiet belt drive, 2-speed turntablealuminum die-cast platter33 1⁄3 and 45rpmbuilt-in phono amp or direct line outstatic balanced S-shaped tonearm w/detachable headshellAudio Technica AT3600L moving-magnet cartridge suppliedanti-skating control for increased stereo balance+/- 10% adjustable pitch controldust cover includeddesigned and developed in the US and Francew17.7 x d13.8 x h5.7in12lbs (package)
Elipson Chroma 200 Turntable is the entry level model in the new Chroma series of turntables. This matte black turntable has a sleek and minimal design that would blend seamlessly into any living environment. IMPROVED AESTHETICS Made in France, the Chroma turntables succeed the prior Alpha and Omega models with major technological advancements and new aesthetic features. This model now features a lift arm, new tray material, graduation on the counterweight alongside a free mechanical scale. NEW ENGINE The new engine and modified engine suspension represent over four years of research and development to ensure the optimum technical performance and sound quality. As well as this, the Chroma has an additional rotary table axis system for smoother listening. KEY FEATURES: Auto speed control Lift Arm Ortofon OM10 cartridge PVC Chassis Polyamid Centraliser Matt finisH
mmf Mark1 Turntable with phono preamp and Bluetooth.Sophisticated Sound at an Entry-Level PriceAlthough the Music Hall Mark1 occupies a lower price point than our famous mmf 2.3, the engineering is substantially the same. Roy Hall’s signature sound can be heard in the entire Music Hall range, and the Mark1 is no exception!All-New TonearmOur new all-aluminum, S-shaped design, with a precision aluminum headshell, allows us to achieve the highest possible level of rigidity and internal damping. The tonearm flange is CNC-machined, which allows for accurate mounting of the tonearm to the heavy chassis. VTA is fully adjustable, and it’s a feature almost never seen in this price-range.This no-compromises solution enables us to achieve that signature Music Hall sound. The magnetic anti-skating feature is quite a luxurious one. And the factory-set pre-adjusted and fixed counterweight makes setup a breeze.CartridgeWe have taken care to mount a cartridge that perfectly matches the characteristics of the tonearm. The Mark1 uses a high quality, super fast and dynamic low mass cartridge from one of the leading cartridge manufacturers in Europe, the Ortofon OM 5E. This creates a beautiful, full-bodied sound, which until now has been impossible to achieve in a budget turntable.Feature List:extremely quiet belt drive, 2-speed turntablealuminum die-cast platter33 1⁄3 and 45rpmbuilt-in phono amp or direct line outstatic balanced S-shaped tonearm w/detachable headshellAudio Technica AT3600L moving-magnet cartridge suppliedanti-skating control for increased stereo balance+/- 10% adjustable pitch controldust cover includeddesigned and developed in the US and Francew17.7 x d13.8 x h5.7in12lbs (package)low noise, belt-drive designhigh-gloss piano lacquer finish or walnut veneerhigh quality 8.6” S-shape aluminium tonearmprecision aluminium headshell and VTA adjustmentdynamically balanced and damped counterweightmagnetic anti-skatingAC synchronous motor for superior speed stabilityhigh quality Ortofon OM 5E cartridge properly aligned and mountedprecision stainless steel main bearing sheathed in Tef-lon® for noise-free fluid operationdynamically balanced alloy platter with soft felt mathigh quality gold RCA connectorsspecial vibration-damping adjustable feetdust cover and 45rpm adaptor included
The Model 60 is the most technically advanced SME turntable ever made, evolved from 75 years of engineering excellence, innovation and perfection, delivering precise and pure audio reproduction. Extremely high build quality, close tolerance precision engineered componentry, striking design and a range of none painted uniquely engineered finishes.Introduced 60 years after SME entered the elite high end audio world, the Model 60 is far superior than the highly credible Model 30 which has been the reference precision turntable for over 3 decades. The new flagship is an entirely new turntable design with clever engineering and technological advancement. Design features include: de-coupled adjustable feet with multipoint isolation, an intelligent suspended suspension system with horizontal and vertical control, hydraulically dampened main bearing, acoustically treated main chassis, sub-chassis and platter, sophisticated new generation drive system with highly accurate speed control, AC motor and independent power transformer. The Model 60 is equipped with the new Series VA tonearm which is an advanced version of the famous Series V tonearm which has been extensively sonically improved by use of a non-metallic tonearm CNC machined from an advanced polymer resin material with high density and high rigidity properties. The Series VA tonearm tube is acoustically inert with a significantly reduced resonance signature, optimised effective mass and a wide cartridge balance weight rangeTest ResultsTurntable Speed Error at 33.33rpm: 33.33rpm (-0.005%) Time to Audible Stabilisation: 5 – 6 seconds Peak Wow/Flutter (Peak wtd): 0.01% / 0.02% Rumble (silent groove, DIN B wtd): -75dB (-75.4 dB with Clamp) Rumble (through bearing, DIN B wtd): -76.5dB Hum & Noise (unwtd, rel to 5cm/sec): -62.5dB Power Consumption: 18w (1w standby)Drive System & Speed RangeThe turntable is driven by a custom made bi-phase AC synchronous motor. The speed control unit uses a dedicated DSP engine to generate two independent pure mathematical sine waves which provide total control of frequency, phase relationship and amplitude. These in turn are matched (tuned) to the motor for accuracy to obtain the best possible performance. The output driver stage is a 2 channel, class AB Bi-polar design with low distortion and relay coupled directly to the motor. The entire design is implemented using high quality surface mount technology on a gold plated FR4 PCB. The speed range is 33.33 and 45rpm with independent memory settings via a switched encoder.
The Model 6 is a class leading integrated turntable delivering a unique sonic performance. Audio engineering excellence is achieved with technologically advanced new materials whilst maintaining the definitive craftsmanship that SME is famous for.Primary features include a CNC machined chassis made from a unique polymer high density resin material providing high mass, small footprint and superb resonance absorption. Main bearing, spindle and drive pulleys are precision made to the same exact standards as all SME high-end turntables. A new generation highly sophisticated electronic speed control unit provides fine pitch speed adjustment within a wide band range.The Model 6 is equipped with an improved version of the highly acclaimed SME M2-9 tonearm which is internally dampened with a unique single element balance system catering for cartridges weighing 5 to 12 grams and suitably designed for both MM and MC cartridges. The headshell is magnesium alloy for lightness and its ingenious design provides rigidity and allows azimuth correction.Design and engineering excellence built by audio enthusiasts for audio enthusiasts.
mmf-11.3 TurntableWe are never still at Music Hall. We’re always seeking to improve upon our past successes and push the limit of what’s possible with each product we design. The Music Hall 11.3 represents the culmination of years of R&D and is the finest example of our design philosophy.Unique TechnologyWe made significant changes to the motor assembly and its placement. The motor now sits on its own isolation platform separate from the turntable. This alteration and other changes to the overall size of the table has significantly elevated the performance and sound of the 11.3. It’s our finest achievement to date.Vibration dampingMoving the main bearing to the second plinth improved cartridge tracking and significantly lowered background noise. The adjustable magnetic-levitation isolation feet and all wiring are mounted on the bottom plinth.—The material used for the hemispheres which separate each of the four main plinths and provide additional vibration damping has been refined and improved. A TPE material is now used, custom designed for music hall, which is able to isolate all the plinth-layers more efficiently. The bottom plinth functions as a mass-loaded resonant sink for the entire turntable.Features List:music hall’s unique quadruple-plinth design with improved TPE vibration isolationnew freestanding and completely isolated motor assemblydual motor and flywheel assembly is located on the center left side of the turntable eliminating all motor and belt vibration from the cartridgeone-piece 9cc Evolution carbon fiber tonearmtonearm uses hardened Swiss ABEC 7 ball races in inverted bearingtonearm is internally wired with flexible wire drawn from high purity copper with only two contact points from cartridge to output connectorscounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperfully adjustable VTA, azimuth, and dampened arm liftexclusive microprocessor electronic speed control with dual motor single flywheel drive system33 1/3 and 45rpm speed change at the touch of a buttonadjustable magnetic-levitation feetinverted ceramic main bearing for ultra-quiet operation7.4lbs (3.35kg) acrylic platterdetachable phono cablehigh quality gold-plated RCA connectorsdisplay-style large removable acrylic dust coverpacked securely in a substantial wood boxexcellent instruction manual and easy assembly
W with 2M Silver phono cartridge This turntable makes use of traditional frame design which was established by the famous turntable manufacturers of the 50's and 60's. It uses a compact simple and elegant form factor.The Classic incorporates a combination of approved belt drive design using a low noise AC motor with an ultra-precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability. Advanced technology is used for decoupling and the completely new designed tone-arm Χαρακτηριστικά:Belt drive with manual speed control 33/45 rpmHeight adjustable decoupling feetPrecision balanced TPE*-damped aluminium-platter / felt matMetal/MDF sandwich chassis floating on TPE* suspension9” carbon/aluminium tonearm with MM & MC capabilityJapanese ball bearing (base of tonearm)Integrated central vertical cable outlet for unhindered arm movementUltra low friction Zircon pin-point cardan bearings (top & side)Azimuth and VTA fully adjustableTPE damped counterweightAvailable with 2M Silver phono cartridgeClassic wooden chassis in 3 matt finishes (walnut, rose nut, eucalyptus)Dust cover included
mmf-11.3 TurntableWe are never still at Music Hall. We’re always seeking to improve upon our past successes and push the limit of what’s possible with each product we design. The Music Hall 11.3 represents the culmination of years of R&D and is the finest example of our design philosophy.Unique TechnologyWe made significant changes to the motor assembly and its placement. The motor now sits on its own isolation platform separate from the turntable. This alteration and other changes to the overall size of the table has significantly elevated the performance and sound of the 11.3. It’s our finest achievement to date.Vibration dampingMoving the main bearing to the second plinth improved cartridge tracking and significantly lowered background noise. The adjustable magnetic-levitation isolation feet and all wiring are mounted on the bottom plinth.—The material used for the hemispheres which separate each of the four main plinths and provide additional vibration damping has been refined and improved. A TPE material is now used, custom designed for music hall, which is able to isolate all the plinth-layers more efficiently. The bottom plinth functions as a mass-loaded resonant sink for the entire turntable.Features List:music hall’s unique quadruple-plinth design with improved TPE vibration isolationnew freestanding and completely isolated motor assemblydual motor and flywheel assembly is located on the center left side of the turntable eliminating all motor and belt vibration from the cartridgeone-piece 9cc Evolution carbon fiber tonearmtonearm uses hardened Swiss ABEC 7 ball races in inverted bearingtonearm is internally wired with flexible wire drawn from high purity copper with only two contact points from cartridge to output connectorscounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperfully adjustable VTA, azimuth, and dampened arm liftexclusive microprocessor electronic speed control with dual motor single flywheel drive system33 1/3 and 45rpm speed change at the touch of a buttonadjustable magnetic-levitation feetinverted ceramic main bearing for ultra-quiet operation7.4lbs (3.35kg) acrylic platterdetachable phono cablehigh quality gold-plated RCA connectorsdisplay-style large removable acrylic dust coverpacked securely in a substantial wood boxexcellent instruction manual and easy assembly
Το Hi-Fi πικάπ DP-450USB της Denon αναπαράγει αγαπημένα άλμπουμ, πιστά στην αυθεντική εγγραφή και διαθέτει θύρα USB για να ψηφιοποιήσετε τη συλλογή σας δίσκων βινυλίου σε ποιότητα αρχείων MP3 ή WAV. Αναζωογονήστε το πάθος σας για το βινύλιο στο σπίτι ή εκτός με το DP-450USB της Denon. Ενσωματωμένη θύρα USB-A σας επιτρέπει να ψηφιοποιήσετε τη συλλογή σας δίσκων βινυλίου και να δημιουργήσετε ποιοτικούς δίσκους σε φορμά αρχείων MP3 ή WAV. Στιβαρή, εκλεπτυσμένη σχεδίαση συνδυάζεται αρμονικά με την υφιστάμενη Denon Design Series. Ο καμπύλος βραχίονας Σχήματος-S, το ζυγοσταθμισμένο οδηγούμενο-με-ιμάντα πλατό περιστρέφει τους δίσκους σας 33 1/3 rpm, 45 rpm ή78 rpm με ακρίβεια και λεπτομέρεια. Συνδέστε το DP-450USB σε οποιονδήποτε ενισχυτή ή σύστημα με αναλογικές εισόδους μέσω του ενσωματωμένου ισοσταθμιστή κεφαλής πικάπ και απολαύστε μουσική, που είναι πιστή στην αυθεντική εγγραφή. Η μοναδική σχεδίαση του καμπύλου βραχίονα Σχήματος-S βελτιστοποιεί τη γωνία ανάγνωσης της αυλάκωσης του δίσκου σε οποιοδήποτε σημείο του δίσκου για μείωση της αρμονικής παραμόρφωσης και για καθαρή ηχητική αναπαραγωγή Ο βραχίονας υποστηρίζει αυτόματη ανύψωση και σταμάτημα αναπαραγωγής, όταν ο δίσκος φτάνει στο τέλος Ο ενσωματωμένος ισοσταθμιστής κεφαλής πικάπ με διακόπτη on/off σας επιτρέπει να συνδέσετε το DP-450USB σε οποιονδήποτε ενισχυτή ή σύστημα με αναλογικές εισόδους ή εισόδους phono Επιλογέας πολλαπλών-ταχυτήτων (33-1/3 rpm, 45 rpm, 78 rpm) για αναπαραγωγή της ευρύτερης δυνατής γκάμας δίσκων βινυλίου Σχεδιασμένο με βάση την πάνω από 100-χρόνων παράδοση της Denon στην ηχητική τελειότητα — εμπιστευτείτε αυτό το υψηλής-ποιότητας και ανθεκτικό πικάπ για παροχή της απόλυτης ηχητικής εμπειρίας Περιλαμβάνει υψηλής-ποιότητας κεφαλή MM για ακριβή ήχο μέσα σε λίγα λεπτά μετά την αποσυσκευασία του Αποκλειστικό, αφαιρούμενο κάλυμμα σκόνης, με περιλαμβανόμενη βάση, εξαλείφει τους κραδασμούς ενός σταθερού-καλύμματος και μπορεί να χρησιμοποιηθεί και ως βάση παρουσίασης για τα καλύμματα των δίσκων βινυλίου Υποστηρίζει κεφαλές τόσο MM (συμπεριλαμβάνεται) όσο και MC — προηγμένη ευελιξία που ταιριάζει με τις ηχητικές σας προτιμήσεις Ζυγοσταθμισμένο, οδηγούμενο-με-ιμάντα πλατό, με αυτόματο αισθητήρα ταχύτητας, διατηρεί ακριβή ταχύτητα για ακριβή ηχητική αναπαραγωγή Ψηφιοποιήστε τη συλλογή σας δίσκων βινυλίου σε WAV ή MP3 με τη θύρα USB την εγγραφή με το πάτημα-ενός-πλήκτρου Στιβαρή, ζυγοσταθμισμένη βάση και ανθεκτική κατασκευή μειώνουν εξωτερικούς κραδασμούς και βελτιώνουν την ηχητική απόδοση Τμήμα της Denon Design Series — κομψή, μοντέρνα σχεδίαση ταιριάζει κατά τρόπο όμορφο στο σπίτι
mmf-11.3 TurntableWe are never still at Music Hall. We’re always seeking to improve upon our past successes and push the limit of what’s possible with each product we design. The Music Hall 11.3 represents the culmination of years of R&D and is the finest example of our design philosophy.Unique TechnologyWe made significant changes to the motor assembly and its placement. The motor now sits on its own isolation platform separate from the turntable. This alteration and other changes to the overall size of the table has significantly elevated the performance and sound of the 11.3. It’s our finest achievement to date.Vibration dampingMoving the main bearing to the second plinth improved cartridge tracking and significantly lowered background noise. The adjustable magnetic-levitation isolation feet and all wiring are mounted on the bottom plinth.—The material used for the hemispheres which separate each of the four main plinths and provide additional vibration damping has been refined and improved. A TPE material is now used, custom designed for music hall, which is able to isolate all the plinth-layers more efficiently. The bottom plinth functions as a mass-loaded resonant sink for the entire turntable.Features List:music hall’s unique quadruple-plinth design with improved TPE vibration isolationnew freestanding and completely isolated motor assemblydual motor and flywheel assembly is located on the center left side of the turntable eliminating all motor and belt vibration from the cartridgeone-piece 9cc Evolution carbon fiber tonearmtonearm uses hardened Swiss ABEC 7 ball races in inverted bearingtonearm is internally wired with flexible wire drawn from high purity copper with only two contact points from cartridge to output connectorscounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperfully adjustable VTA, azimuth, and dampened arm liftexclusive microprocessor electronic speed control with dual motor single flywheel drive system33 1/3 and 45rpm speed change at the touch of a buttonadjustable magnetic-levitation feetinverted ceramic main bearing for ultra-quiet operation7.4lbs (3.35kg) acrylic platterdetachable phono cablehigh quality gold-plated RCA connectorsdisplay-style large removable acrylic dust coverpacked securely in a substantial wood boxexcellent instruction manual and easy assembly
mmf-9.3 TurntableThe Music Hall mmf-9.3 turntable is a two speed, belt driven audiophile turntable employing the unique triple plinth construction originated by Music Hall. Distinctive DesignThe distinctive design isolates the critical sound reproducing components: platter, main bearing, tonearm, and cartridge, on the top platform, from the adjustable tip-toe feet and wiring, which are mounted on the bottom platform. The motor and speed controls are isolated on their own vibration damping base and completely decoupled from the turntable. Sorbothane hemispheres separate each of the three platforms and provide additional suspension and vibration damping.Our Penultimate TurntableThe mmf-9.3 comes in a high-gloss piano black lacquer finish and is available with or without a Goldring Eroica LX cartridge.Feature List:music hall’s unique triple plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 1⁄3 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance damping puckoptional Goldring Eroica LX low-output moving-coil cartridge with Gyger II line contact stylusthe cartridge supplied is properly aligned and mountedinverted ceramic main bearing for super quiet, fluid operationnon resonant, 1” thick acrylic plattersoft felt platter mathigh quality gold RCA connectors and detachable phono cableadjustable tip toe feet with anti scratch cupslow noise fully manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly
mmf-9.3 TurntableThe Music Hall mmf-9.3 turntable is a two speed, belt driven audiophile turntable employing the unique triple plinth construction originated by Music Hall. Distinctive DesignThe distinctive design isolates the critical sound reproducing components: platter, main bearing, tonearm, and cartridge, on the top platform, from the adjustable tip-toe feet and wiring, which are mounted on the bottom platform. The motor and speed controls are isolated on their own vibration damping base and completely decoupled from the turntable. Sorbothane hemispheres separate each of the three platforms and provide additional suspension and vibration damping.Our Penultimate TurntableThe mmf-9.3 comes in a high-gloss piano black lacquer finish and is available with or without a Goldring Eroica LX cartridge.Feature List:music hall’s unique triple plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 1⁄3 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance damping puckoptional Goldring Eroica LX low-output moving-coil cartridge with Gyger II line contact stylusthe cartridge supplied is properly aligned and mountedinverted ceramic main bearing for super quiet, fluid operationnon resonant, 1” thick acrylic plattersoft felt platter mathigh quality gold RCA connectors and detachable phono cableadjustable tip toe feet with anti scratch cupslow noise fully manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly
mmf-9.3 TurntableThe Music Hall mmf-9.3 turntable is a two speed, belt driven audiophile turntable employing the unique triple plinth construction originated by Music Hall. Distinctive DesignThe distinctive design isolates the critical sound reproducing components: platter, main bearing, tonearm, and cartridge, on the top platform, from the adjustable tip-toe feet and wiring, which are mounted on the bottom platform. The motor and speed controls are isolated on their own vibration damping base and completely decoupled from the turntable. Sorbothane hemispheres separate each of the three platforms and provide additional suspension and vibration damping.Our Penultimate TurntableThe mmf-9.3 comes in a high-gloss piano black lacquer finish and is available with or without a Goldring Eroica LX cartridge.Feature List:music hall’s unique triple plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 1⁄3 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance damping puckoptional Goldring Eroica LX low-output moving-coil cartridge with Gyger II line contact stylusthe cartridge supplied is properly aligned and mountedinverted ceramic main bearing for super quiet, fluid operationnon resonant, 1” thick acrylic plattersoft felt platter mathigh quality gold RCA connectors and detachable phono cableadjustable tip toe feet with anti scratch cupslow noise fully manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly
mmf-7.3 TurntableThe Music Hall mmf-7.3 turntable is a 2-Speed, belt-driven audiophile turntable employing the unique dual-plinth construction originated by Music Hall.Distinctive DesignThe distinctive design of the mmf-7.3 isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the adjustable tip-toe feet which are mounted on the bottom platform. The motor speed controls, and wiring are isolated on their own platform and completely decoupled from the turntable.Vibration DampingSorbothane hemispheres separate the two platforms and provide additional suspension and vibration damping. The mmf-7.3 is available with or without the Ortofon 2M Bronze cartridge.Feature List:music hall’s unique dual-plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance-damping puckoptional Ortofon 2M Bronze cartridge with a nude fine line stylusthe supplied cartridge is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free, fluid operationnon-resonant acrylic platter with metal screw-on record clamp and soft felt mathigh-quality gold RCA connectors and detachable phono cableadjustable tip-toe feet with anti scratch cupslow-noise, fully-manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly
mmf-3.3 TurntableOur first entry-level table utilizing the unique dual-plinth technology!Focus on ComponentsThe 3-speed belt driven table was developed for those seeking a perfectly matched set of features with an uncompromising focus on sound performance.The Complete PackageThe mmf-3.3 comes complete with a tonearm and Ortofon 2M Red cartridge precision mounted.We are pleased to introduce our first entry-level table utilizing the unique dual-plinth technology originated by music hall. The mmf-3.3 embodies the culmination of over 30 years of research, development, and most important of all, listening. The 3-speed belt driven table was developed for those seeking a perfectly matched set of features with an uncompromising focus on sound performance. The 3.3 is constructed using high quality components and comes complete with a tonearm, cartridge mounted, and dust cover.Speed ControlThe 3.3 has a built-in electronic speed control for 33/45/and 78. The platter speed switches from 33 to 45 rpm at the touch of a button. 78 rpm requires the movement of the belt to a different location on the motor pulley, and the use of a different belt, included with the turntable.Carbon Fiber Arm with Bonded Alloy HeadshellThis tonearm is unique to music hall. Bonding the alloy headshell to the carbon arm-tube stiffens and dampens the carbon fiber tube. This construction significantly improves the sound and performance over similar looking one-piece carbon arms. The alloy headshell allows you to securely mount the cartridge to the tonearm without the twist and flex that is common in lesser one-piece carbon arms. Tonearms should not twist/flex as this negatively impacts the cartridge and tonearm’s ability to properly track the record groove. On many one-piece carbon tonearms, you can literally pinch the cartridge end of arm between your thumb and forefinger and twist/flex the arm-tube. Try this with the music hall and the tonearm remains rigid as your fingers begin to ache. The arm itself is housed in a 4-point gimbal bearing construction using Swiss ABEC bearings. This is superior to many of music hall’s competitors who use a lesser 2-point bearing system.Feature List:Music Hall’s unique dual-plinth design – isolating the electronics and motor from the main bearing and tonearm33⅓, 45, or 78rpm speeds at the touch of a buttonElectronic speed controlled DC motor for superior speed stability, isolated on lower plinthCustom carbon fiber tonearm with alloy headshell for superb tracking abilityFlexible internal tonearm wire drawn from high purity copperCounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperHighly regarded Ortofon 2M Red cartridge with replaceable elliptical stylusThe cartridge supplied is properly aligned and mountedHigh precision stainless steel and bronze main bearing assembly for quiet fluid operationSpecial vibration damping adjustable feetHigh quality gold RCA connectors with detachable phono cableFull-size alloy platter and felt matQuick and easy to assembleDust cover and 45rpm adaptor included
mmf-3.3 TurntableOur first entry-level table utilizing the unique dual-plinth technology!Focus on ComponentsThe 3-speed belt driven table was developed for those seeking a perfectly matched set of features with an uncompromising focus on sound performance.The Complete PackageThe mmf-3.3 comes complete with a tonearm and Ortofon 2M Red cartridge precision mounted.We are pleased to introduce our first entry-level table utilizing the unique dual-plinth technology originated by music hall. The mmf-3.3 embodies the culmination of over 30 years of research, development, and most important of all, listening. The 3-speed belt driven table was developed for those seeking a perfectly matched set of features with an uncompromising focus on sound performance. The 3.3 is constructed using high quality components and comes complete with a tonearm, cartridge mounted, and dust cover.Speed ControlThe 3.3 has a built-in electronic speed control for 33/45/and 78. The platter speed switches from 33 to 45 rpm at the touch of a button. 78 rpm requires the movement of the belt to a different location on the motor pulley, and the use of a different belt, included with the turntable.Carbon Fiber Arm with Bonded Alloy HeadshellThis tonearm is unique to music hall. Bonding the alloy headshell to the carbon arm-tube stiffens and dampens the carbon fiber tube. This construction significantly improves the sound and performance over similar looking one-piece carbon arms. The alloy headshell allows you to securely mount the cartridge to the tonearm without the twist and flex that is common in lesser one-piece carbon arms. Tonearms should not twist/flex as this negatively impacts the cartridge and tonearm’s ability to properly track the record groove. On many one-piece carbon tonearms, you can literally pinch the cartridge end of arm between your thumb and forefinger and twist/flex the arm-tube. Try this with the music hall and the tonearm remains rigid as your fingers begin to ache. The arm itself is housed in a 4-point gimbal bearing construction using Swiss ABEC bearings. This is superior to many of music hall’s competitors who use a lesser 2-point bearing system.Feature List:Music Hall’s unique dual-plinth design – isolating the electronics and motor from the main bearing and tonearm33⅓, 45, or 78rpm speeds at the touch of a buttonElectronic speed controlled DC motor for superior speed stability, isolated on lower plinthCustom carbon fiber tonearm with alloy headshell for superb tracking abilityFlexible internal tonearm wire drawn from high purity copperCounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperHighly regarded Ortofon 2M Red cartridge with replaceable elliptical stylusThe cartridge supplied is properly aligned and mountedHigh precision stainless steel and bronze main bearing assembly for quiet fluid operationSpecial vibration damping adjustable feetHigh quality gold RCA connectors with detachable phono cableFull-size alloy platter and felt matQuick and easy to assembleDust cover and 45rpm adaptor included
The Elipson Chroma 400 is a belt-driven manual turntable with an elegant design offering a lacquered paint or satin wood finish. Benefiting from our latest electronic and mechanical technologies, it is assembled in France in our premises.The Elipson Chroma 400 offers the characteris-tics that contributed to the success of the Omega models such as the OTT (Orbital Torsion Tonearm) tonearm in carbon, its digital processing system of the motor rotation. It is distinguished by a new axis system for an even more precise rotation, an improved drive motor with optimized damping, a graduated counterweight, as well as by the addition of a cue control lever for your comfort of use.
The Elipson Chroma 400 is a belt-driven manual turntable with an elegant design offering a lacquered paint or satin wood finish. Benefiting from our latest electronic and mechanical technologies, it is assembled in France in our premises.The Elipson Chroma 400 offers the characteris-tics that contributed to the success of the Omega models such as the OTT (Orbital Torsion Tonearm) tonearm in carbon, its digital processing system of the motor rotation. It is distinguished by a new axis system for an even more precise rotation, an improved drive motor with optimized damping, a graduated counterweight, as well as by the addition of a cue control lever for your comfort of use.
mmf-11.3 TurntableWe are never still at Music Hall. We’re always seeking to improve upon our past successes and push the limit of what’s possible with each product we design. The Music Hall 11.3 represents the culmination of years of R&D and is the finest example of our design philosophy.Unique TechnologyWe made significant changes to the motor assembly and its placement. The motor now sits on its own isolation platform separate from the turntable. This alteration and other changes to the overall size of the table has significantly elevated the performance and sound of the 11.3. It’s our finest achievement to date.Vibration dampingMoving the main bearing to the second plinth improved cartridge tracking and significantly lowered background noise. The adjustable magnetic-levitation isolation feet and all wiring are mounted on the bottom plinth.—The material used for the hemispheres which separate each of the four main plinths and provide additional vibration damping has been refined and improved. A TPE material is now used, custom designed for music hall, which is able to isolate all the plinth-layers more efficiently. The bottom plinth functions as a mass-loaded resonant sink for the entire turntable.Features List:music hall’s unique quadruple-plinth design with improved TPE vibration isolationnew freestanding and completely isolated motor assemblydual motor and flywheel assembly is located on the center left side of the turntable eliminating all motor and belt vibration from the cartridgeone-piece 9cc Evolution carbon fiber tonearmtonearm uses hardened Swiss ABEC 7 ball races in inverted bearingtonearm is internally wired with flexible wire drawn from high purity copper with only two contact points from cartridge to output connectorscounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperfully adjustable VTA, azimuth, and dampened arm liftexclusive microprocessor electronic speed control with dual motor single flywheel drive system33 1/3 and 45rpm speed change at the touch of a buttonadjustable magnetic-levitation feetinverted ceramic main bearing for ultra-quiet operation7.4lbs (3.35kg) acrylic platterdetachable phono cablehigh quality gold-plated RCA connectorsdisplay-style large removable acrylic dust coverpacked securely in a substantial wood boxexcellent instruction manual and easy assembly
mmf-9.3 TurntableThe Music Hall mmf-9.3 turntable is a two speed, belt driven audiophile turntable employing the unique triple plinth construction originated by Music Hall. Distinctive DesignThe distinctive design isolates the critical sound reproducing components: platter, main bearing, tonearm, and cartridge, on the top platform, from the adjustable tip-toe feet and wiring, which are mounted on the bottom platform. The motor and speed controls are isolated on their own vibration damping base and completely decoupled from the turntable. Sorbothane hemispheres separate each of the three platforms and provide additional suspension and vibration damping.Our Penultimate TurntableThe mmf-9.3 comes in a high-gloss piano black lacquer finish and is available with or without a Goldring Eroica LX cartridge.Feature List:music hall’s unique triple plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 1⁄3 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance damping puckoptional Goldring Eroica LX low-output moving-coil cartridge with Gyger II line contact stylusthe cartridge supplied is properly aligned and mountedinverted ceramic main bearing for super quiet, fluid operationnon resonant, 1” thick acrylic plattersoft felt platter mathigh quality gold RCA connectors and detachable phono cableadjustable tip toe feet with anti scratch cupslow noise fully manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly
mmf-7.3se TurntableThe Music Hall mmf-7.3se turntable is a 2-Speed, belt-driven audiophile turntable employing the unique dual-plinth construction originated by Music Hall.Distinctive DesignThe distinctive design of the mmf-7.3se isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the adjustable tip-toe feet which are mounted on the bottom platform. The motor speed controls, and wiring are isolated on their own platform and completely decoupled from the turntable.Vibration DampingSorbothane hemispheres separate the two platforms and provide additional suspension and vibration damping. The mmf-7.3se is available with or without the Ortofon 2M Bronze cartridge.Feature List:music hall’s unique dual-plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance-damping puckoptional Ortofon 2M Bronze cartridge with a nude fine line stylusthe supplied cartridge is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free, fluid operationnon-resonant acrylic platter with metal screw-on record clamp and soft felt mathigh-quality gold RCA connectors and detachable phono cableadjustable tip-toe feet with anti scratch cupslow-noise, fully-manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly
mmf-7.3 TurntableThe Music Hall mmf-7.3 turntable is a 2-Speed, belt-driven audiophile turntable employing the unique dual-plinth construction originated by Music Hall.Distinctive DesignThe distinctive design of the mmf-7.3 isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the adjustable tip-toe feet which are mounted on the bottom platform. The motor speed controls, and wiring are isolated on their own platform and completely decoupled from the turntable.Vibration DampingSorbothane hemispheres separate the two platforms and provide additional suspension and vibration damping. The mmf-7.3 is available with or without the Ortofon 2M Bronze cartridge.Feature List:music hall’s unique dual-plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance-damping puckoptional Ortofon 2M Bronze cartridge with a nude fine line stylusthe supplied cartridge is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free, fluid operationnon-resonant acrylic platter with metal screw-on record clamp and soft felt mathigh-quality gold RCA connectors and detachable phono cableadjustable tip-toe feet with anti scratch cupslow-noise, fully-manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly
stealth TurntableThe Music Hall stealth turntable—our first direct drive turntable— features a brushless low-torque motor that automatically stops running at the end of a record.A Sound FoundationThis substantial this 24-pound turntable attenuates external vibrations by utilizing what Michael Fremer notes is “an unusually heavy, multi-layer and well-damped chassis as well as large, viscous-elastomer damped height-adjustable feet and a 4 pound, elastomer-damped… aluminum platter”.Ready to PlayStealth is a 3-speed direct drive turntable that comes complete with an s-shaped tonearm, a detachable headshell, and a factory-mounted, precision aligned Ortofon 2M Blue cartridge.Feature List:direct drive designlow torque, brushless motor touch-activated electronic speed control33 1⁄3, 45, and 78rpmmotor automatically stops at the end of the recordautomatic standby mode activated after 20 minutes of non-usealuminum tonearm with VTA that can be adjusted while the record is playingremovable head shellOrtofon 2M Blue cartridge comes pre-mounted and precision-aligned4-pound aluminum plattervibration-damping rubber platter matvibration-damping feetcloth dust coverremovable RCA cables
mmf-5.3se TurntableThe Music Hall mmf-5.3se turntable is 2-Speed belt driven audiophile turntable employing the unique dual-plinth construction originated by Music Hall. It features a gorgeous and classic-looking rosenut real wood veneer finish.Distinctive DesignThe distinctive design isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the motor, switch, wiring, and feet which are mounted on the bottom platform.A Complete PackageViso-elastic cones separate the two platforms and provide vibration damping. The mmf-5.3se comes complete with an Ortofon 2M Blue cartridge.Feature List:Music Hall’s unique dual-plinth constructiontop tier 9” carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damperDC synchronous motor for superior speed stability, separately isolated on the lower platformtwo-speed stepped motor pulley for 33 1/3 and 45rpmOrtofon 2M Blue cartridge with replaceable nude elliptical diamond stylusthe cartridge supplied is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free fluid operationalloy platter with soft felt mat screw-on record clamphigh quality gold RCA connectorsdetachable phono cablespecial vibration damping adjustable feetbuilt-in round spirit level for proper levelinglow noise fully manual belt-drive designexcellent instruction manual and easy assemblydust cover and 45rpm adaptor included
mmf-5.3 TurntableThe Music Hall mmf-5.3 turntable is 2-Speed belt driven audiophile turntable employing the unique dual-plinth construction originated by Music Hall.Distinctive DesignThe distinctive design isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the motor, switch, wiring, and feet which are mounted on the bottom platform.A Complete PackageViso-elastic cones separate the two platforms and provide vibration damping. The mmf-5.3 comes complete with an Ortofon 2M Blue cartridge.Dust CoverThe included hinged dust cover keeps your mmf-5.3wh protected.Pre-Mounted CartridgeAn Ortofon 2M Blue cartridge comes precision mounted and aligned.Built-In LevelThe 5.3wh has a built-in round spirit level for proper leveling.Rear Viewtop-quality RCA jacks and special vibration damping adjustable feet.Feature List:Music Hall’s unique dual-plinth constructiontop tier 9” carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damperDC synchronous motor for superior speed stability, separately isolated on the lower platformtwo-speed stepped motor pulley for 33 1/3 and 45rpmOrtofon 2M Blue cartridge with replaceable nude elliptical diamond stylusthe cartridge supplied is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free fluid operationalloy platter with soft felt mat screw-on record clamphigh quality gold RCA connectorsdetachable phono cablespecial vibration damping adjustable feetbuilt-in round spirit level for proper levelinglow noise fully manual belt-drive designexcellent instruction manual and easy assemblydust cover and 45rpm adaptor included
mmf-5.3le TurntableThe Music Hall mmf-5.3le turntable is 2-Speed belt driven audiophile turntable employing the unique dual-plinth construction originated by Music Hall.Distinctive DesignThe distinctive design isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the motor, switch, wiring, and feet which are mounted on the bottom platform.A Complete PackageViso-elastic cones separate the two platforms and provide vibration damping. The mmf-5.3le comes complete with an Ortofon 2M Blue cartridge.Feature List:Music Hall’s unique dual-plinth constructiontop tier 9” carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damperDC synchronous motor for superior speed stability, separately isolated on the lower platformtwo-speed stepped motor pulley for 33 1/3 and 45rpmOrtofon 2M Blue cartridge with replaceable nude elliptical diamond stylusthe cartridge supplied is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free fluid operationalloy platter with soft felt mat screw-on record clamphigh quality gold RCA connectorsdetachable phono cablespecial vibration damping adjustable feetbuilt-in round spirit level for proper levelinglow noise fully manual belt-drive designexcellent instruction manual and easy assemblydust cover and 45rpm adaptor included
mmf-5.3 TurntableThe Music Hall mmf-5.3 turntable is 2-Speed belt driven audiophile turntable employing the unique dual-plinth construction originated by Music Hall.Distinctive DesignThe distinctive design isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the motor, switch, wiring, and feet which are mounted on the bottom platform.A Complete PackageViso-elastic cones separate the two platforms and provide vibration damping. The mmf-5.3 comes complete with an Ortofon 2M Blue cartridge.Feature List:Music Hall’s unique dual-plinth constructiontop tier 9” carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damperDC synchronous motor for superior speed stability, separately isolated on the lower platformtwo-speed stepped motor pulley for 33 1/3 and 45rpmOrtofon 2M Blue cartridge with replaceable nude elliptical diamond stylusthe cartridge supplied is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free fluid operationalloy platter with soft felt mat screw-on record clamphigh quality gold RCA connectorsdetachable phono cablespecial vibration damping adjustable feetbuilt-in round spirit level for proper levelinglow noise fully manual belt-drive designexcellent instruction manual and easy assemblydust cover and 45rpm adaptor included
mmf-3.3se TurntableOur first entry-level table utilizibg the unique dual-plinth technology!Focus on ComponentsThe 3-speed belt driven table was developed for those seeking a perfectly matched set of features with an uncompromising focus on sound performance.The Complete PackageThe mmf-3.3se comes complete with a tonearm and Ortofon 2M Red cartridge precision mounted.We are pleased to introduce our first entry-level table utilizing the unique dual-plinth technology originated by music hall. The mmf-3.3se embodies the culmination of over 30 years of research, development, and most important of all, listening. The 3-speed belt driven table was developed for those seeking a perfectly matched set of features with an uncompromising focus on sound performance. The 3.3se is constructed using high quality components and comes complete with a tonearm, cartridge mounted, and dust cover.Speed ControlThe 3.3se has a built-in electronic speed control for 33/45/and 78. The platter speed switches from 33 to 45 rpm at the touch of a button. 78 rpm requires the movement of the belt to a different location on the motor pulley, and the use of a different belt, included with the turntable.Carbon Fiber Arm with Bonded Alloy HeadshellThis tonearm is unique to music hall. Bonding the alloy headshell to the carbon arm-tube stiffens and dampens the carbon fiber tube. This construction significantly improves the sound and performance over similar looking one-piece carbon arms. The alloy headshell allows you to securely mount the cartridge to the tonearm without the twist and flex that is common in lesser one-piece carbon arms. Tonearms should not twist/flex as this negatively impacts the cartridge and tonearm’s ability to properly track the record groove. On many one-piece carbon tonearms, you can literally pinch the cartridge end of arm between your thumb and forefinger and twist/flex the arm-tube. Try this with the music hall and the tonearm remains rigid as your fingers begin to ache. The arm itself is housed in a 4-point gimbal bearing construction using Swiss ABEC bearings. This is superior to many of music hall’s competitors who use a lesser 2-point bearing system.Feature List:Music Hall’s unique dual-plinth design – isolating the electronics and motor from the main bearing and tonearm33⅓, 45, or 78rpm speeds at the touch of a buttonElectronic speed controlled DC motor for superior speed stability, isolated on lower plinthCustom carbon fiber tonearm with alloy headshell for superb tracking abilityFlexible internal tonearm wire drawn from high purity copperCounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperHighly regarded Ortofon 2M Red cartridge with replaceable elliptical stylusThe cartridge supplied is properly aligned and mountedHigh precision stainless steel and bronze main bearing assembly for quiet fluid operationSpecial vibration damping adjustable feetHigh quality gold RCA connectors with detachable phono cableFull-size alloy platter and felt matQuick and easy to assembleDust cover and 45rpm adaptor included
mmf-3.3 TurntableOur first entry-level table utilizing the unique dual-plinth technology!Focus on ComponentsThe 3-speed belt driven table was developed for those seeking a perfectly matched set of features with an uncompromising focus on sound performance.The Complete PackageThe mmf-3.3 comes complete with a tonearm and Ortofon 2M Red cartridge precision mounted.We are pleased to introduce our first entry-level table utilizing the unique dual-plinth technology originated by music hall. The mmf-3.3 embodies the culmination of over 30 years of research, development, and most important of all, listening. The 3-speed belt driven table was developed for those seeking a perfectly matched set of features with an uncompromising focus on sound performance. The 3.3 is constructed using high quality components and comes complete with a tonearm, cartridge mounted, and dust cover.Speed ControlThe 3.3 has a built-in electronic speed control for 33/45/and 78. The platter speed switches from 33 to 45 rpm at the touch of a button. 78 rpm requires the movement of the belt to a different location on the motor pulley, and the use of a different belt, included with the turntable.Carbon Fiber Arm with Bonded Alloy HeadshellThis tonearm is unique to music hall. Bonding the alloy headshell to the carbon arm-tube stiffens and dampens the carbon fiber tube. This construction significantly improves the sound and performance over similar looking one-piece carbon arms. The alloy headshell allows you to securely mount the cartridge to the tonearm without the twist and flex that is common in lesser one-piece carbon arms. Tonearms should not twist/flex as this negatively impacts the cartridge and tonearm’s ability to properly track the record groove. On many one-piece carbon tonearms, you can literally pinch the cartridge end of arm between your thumb and forefinger and twist/flex the arm-tube. Try this with the music hall and the tonearm remains rigid as your fingers begin to ache. The arm itself is housed in a 4-point gimbal bearing construction using Swiss ABEC bearings. This is superior to many of music hall’s competitors who use a lesser 2-point bearing system.Feature List:Music Hall’s unique dual-plinth design – isolating the electronics and motor from the main bearing and tonearm33⅓, 45, or 78rpm speeds at the touch of a buttonElectronic speed controlled DC motor for superior speed stability, isolated on lower plinthCustom carbon fiber tonearm with alloy headshell for superb tracking abilityFlexible internal tonearm wire drawn from high purity copperCounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperHighly regarded Ortofon 2M Red cartridge with replaceable elliptical stylusThe cartridge supplied is properly aligned and mountedHigh precision stainless steel and bronze main bearing assembly for quiet fluid operationSpecial vibration damping adjustable feetHigh quality gold RCA connectors with detachable phono cableFull-size alloy platter and felt matQuick and easy to assembleDust cover and 45rpm adaptor included
mmf-2.3se TurntableThe Music Hall mmf-2.3 Special Edition Turntable is a 2-Speed belt driven audiophile turntable with special rosenut real wood veneer finish.Focus on ComponentsConstructed using high quality components, the mmf-2.3se has been simplified to focus on the critical components: bearing, motor, and tonearm. Features touch button electronic speed control.The Complete PackageThe mmf-2.3se comes complete with a tonearm and music hall spirit cartridge precision mounted.Feature List:electronic speed control for easy speed changes from 33 1/3 to 45rpmspecial vibration damping adjustable feetcustom carbon fiber tonearm for superb tracking abilitytonearm features a 4-point gimbal bearing assembly using ultra-precision ABEC bearingsfully adjustable VTA, azimuth, and dampened arm lift mechanismlow noise fully manual belt-drive designseparately isolated DC synchronous motor for superior speed stabilityMusic Hall Spirit moving-magnet cartridge with replaceable elliptical stylus the cartridge supplied is properly aligned and mountedhigh precision stainless steel and bronze main-bearing assembly for quiet fluid operationhigh quality gold RCA connectors with detachable phono cablefull-size alloy platter and felt matexcellent instruction manualquick and easy to assembledust cover and 45rpm adaptor
mmf-2.3 TurntableThe Music Hall mmf-2.3 turntable is a 2-speed belt driven audiophile turntable at a budget price.Focus on ComponentsConstructed using high quality components, the mmf-2.3 has been simplified to focus on the critical components: bearing, motor, and tonearm.The Complete PackageThe mmf-2.3 comes complete with a tonearm and music hall spirit cartridge precision mounted. Feature List:special vibration damping adjustable feettop tier 8.6” carbon fiber tonearm with aluminum headshellfully adjustable VTA, azimuth, and dampened arm lift mechanismtonearm features a 4-point gimbal bearing assembly using ultra-precision ABEC bearingslow noise fully manual belt-drive designseparately isolated DC synchronous motor for superior speed stabilitytwo-speed stepped motor pulley for 33 1⁄3 and 45rpmmusic hall Spirit moving-magnet cartridge with replaceable elliptical stylusthe cartridge supplied is properly aligned and mountedhigh precision stainless steel and bronze bearing assembly for quiet, fluid operationhigh quality gold RCA connectors with detachable phono cablefull-size alloy platter and felt matexcellent instruction manualquick and easy to assembledust cover and 45rpm adaptor
mmf-2.3 TurntableThe Music Hall mmf-2.3 turntable is a 2-speed belt driven audiophile turntable at a budget price.Focus on ComponentsConstructed using high quality components, the mmf-2.3 has been simplified to focus on the critical components: bearing, motor, and tonearm.The Complete PackageThe mmf-2.3 comes complete with a tonearm and music hall spirit cartridge precision mounted. Feature List:special vibration damping adjustable feettop tier 8.6” carbon fiber tonearm with aluminum headshellfully adjustable VTA, azimuth, and dampened arm lift mechanismtonearm features a 4-point gimbal bearing assembly using ultra-precision ABEC bearingslow noise fully manual belt-drive designseparately isolated DC synchronous motor for superior speed stabilitytwo-speed stepped motor pulley for 33 1⁄3 and 45rpmmusic hall Spirit moving-magnet cartridge with replaceable elliptical stylusthe cartridge supplied is properly aligned and mountedhigh precision stainless steel and bronze bearing assembly for quiet, fluid operationhigh quality gold RCA connectors with detachable phono cablefull-size alloy platter and felt matexcellent instruction manualquick and easy to assembledust cover and 45rpm adaptor
mmf-1.3 TurntableThe Music Hall mmf-1.3 turntable sets a new benchmark for affordable audiophile turntables. With a built-in phono pre-amplifier and a quality, pre-mounted cartridge, the mmf-1.3 is everything you need to start listening to vinyl right out of the box!Focus On ComponentsOur new entry-level turntable provides a feature set that is unrivaled at its price. The construction of the mmf-1.3 has been simplified to focus on the critical components; the bearing, the motor, and the tonearm.A Complete PackageA 3-speed belt driven turntable that comes complete with a tonearm, mounted cartridge, and built-in phono amp.—The included Audio Technica AT3600L cartridge has been precision aligned.Pre-mounted CartridgeA quality Audio-Technica cartridge is pre-mounted and precision-aligned.Speed ControlA built-in speed control circuit ensures the accuracy of the mmf-1.3’s 3 speeds.Built-In Phono Pre-amplifierA built-in phono preamplifier allows you to connect directly to your current system.Dust CoverA hinged dust cover keeps your mmf-1.3 protected when not in use.Feature List:belt driveelectronic speed controlled motor33 1⁄3, 45, and 78rpmaluminum tonearm with removable headshellpiano black MDF plinthvibration-damping rubber platter matAudio Technica AT3600L cartridge aluminum platterdust coverbuilt-in phono pre-ampremovable RCA cablesvibration damping feet
mmf Mark1 Turntable Sophisticated Sound at an Entry-Level PriceAlthough the Music Hall Mark1 occupies a lower price point than our famous mmf 2.3, the engineering is substantially the same. Roy Hall’s signature sound can be heard in the entire Music Hall range, and the Mark1 is no exception!All-New TonearmOur new all-aluminum, S-shaped design, with a precision aluminum headshell, allows us to achieve the highest possible level of rigidity and internal damping. The tonearm flange is CNC-machined, which allows for accurate mounting of the tonearm to the heavy chassis. VTA is fully adjustable, and it’s a feature almost never seen in this price-range.This no-compromises solution enables us to achieve that signature Music Hall sound. The magnetic anti-skating feature is quite a luxurious one. And the factory-set pre-adjusted and fixed counterweight makes setup a breeze.CartridgeWe have taken care to mount a cartridge that perfectly matches the characteristics of the tonearm. The Mark1 uses a high quality, super fast and dynamic low mass cartridge from one of the leading cartridge manufacturers in Europe, the Ortofon OM 5E. This creates a beautiful, full-bodied sound, which until now has been impossible to achieve in a budget turntable.Feature List:extremely quiet belt drive, 2-speed turntablealuminum die-cast platter33 1⁄3 and 45rpmbuilt-in phono amp or direct line outstatic balanced S-shaped tonearm w/detachable headshellAudio Technica AT3600L moving-magnet cartridge suppliedanti-skating control for increased stereo balance+/- 10% adjustable pitch controldust cover includeddesigned and developed in the US and Francew17.7 x d13.8 x h5.7in12lbs (package)low noise, belt-drive designhigh-gloss piano lacquer finish or walnut veneerhigh quality 8.6” S-shape aluminium tonearmprecision aluminium headshell and VTA adjustmentdynamically balanced and damped counterweightmagnetic anti-skatingAC synchronous motor for superior speed stabilityhigh quality Ortofon OM 5E cartridge properly aligned and mountedprecision stainless steel main bearing sheathed in Tef-lon® for noise-free fluid operationdynamically balanced alloy platter with soft felt mathigh quality gold RCA connectorsspecial vibration-damping adjustable feetdust cover and 45rpm adaptor included
Elipson Chroma 400 turntable is inspired by the Alpha 100 and Omega 100 models. This turntable comes in black, red and white finishes and features a new lift arm, engine and suspension system. CHROMA RANGE The Chroma 400 model is one of the mid-range models in this new range from Elipson. It features a new lift arm, a key feature in the upgraded Chroma design. In the 400 line, this tonearm is made from high quality carbon. The turntable also has auto-speed control and includes an Ortofon OM10 cartridge. NEW COMPONENTS Elipson have made slight changes to the aesthetics of the Chroma models, changing the tray material whilst keeping its elegant, modern looks. The technical components have also been updated with the inclusion of a new lift arm, new engine, suspension and rotary system and improved electronic card. KEY FEATURES: Auto speed control Lift Arm Carbon Tonearm Ortofon OM10 cartridge Lacquered PMMA Chassis Aluminium Centraliser