. go to top icon

Ηχεία Surround

Φίλτρα
25  Προϊόντα

The DALI ALTECO C-1 is truly a multipurpose speaker in both design and function. DALI wanted to ensure that the ALTECO C-1 is usable as both a height speaker as well as a traditional stereo speaker. By designing the crossover for stereo use and by keeping a strict focus on DALI sound design principles, we have created a speaker that fulfills both criteria. It is the perfect fit for adding height information to a surround setup or taking the role as an out-of-the-way stereo speaker.The ALTECO C-1 delivers believable height information from Atmos, DTS-X and Auro-3D movies in surround setup - not only when “firing up” using the ceiling as a reflector, but also “firing down” from a position up under the ceiling.The ALTECO C-1 is able to achieve this even without special equalizing in order to enhance the effects from HRTF (Head Related Transfer Function) technology. A technology found in Atmos certified speakers.Instead the ALTECO C-1 relies only on the height processing done in the amplifier, when selected. Had we included non-linear HRTF equalizing in the ALTECO C1, it would have been impossible to use it as a versatile neutral speaker, limiting the use to only an up-firing type speaker.Designed the way it is the DALI ALTECO C-1 offers the best from several worlds giving you ultimate flexibility and multiple applications. DUAL SOUND MODEThe unique angular design combined with the dual sound mode enables this speaker to be used in a multitude of different scenarios. Choose 'UP' on the front baffle switch to beam the sound waves either straight out for a soft downwards angle, or by selecting 'DOWN', beaming the sound almost straight down for close position listening.UP-FIRINGThe angular design of this speaker makes it perfect for up-firing use. Combined with a surround receiver that has the ability to render height information (Dolby Atmos, DTS-X or Auro-3D), placing it on top of the front speakers, and even on top of the rear speakers will offer an excellent ceiling reflected rendering of height information in compatible movies and concerts.WOOD FIBRE CONESOur low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.SOFT DOME TWEETERThe dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from our high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2). Specifications :Product seriesALTECOFrequency Range (+/-3 dB) [Hz]74 - 25,000 HzSensitivity (2,83 V/1 m) [dB]83.0 dBNominal Impedance [ohms]6 ohmsMaximum SPL [dB]103 dBRecommended Amplifier Power [W]40 - 100 WattCrossover Frequency [Hz]2,100 HzCrossover Principle2-wayHigh frequency driver, Quantity1 x 21 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4.5"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire (Spring loaded push button) Recommended PlacementOn-Wall On speaker Recommended Distance From Wall [cm]    1 - 100 cmDimensions (HxWxD) [mm]265 x 160 x 200Weight [kg]2.9 kgAccessories IncludedRubber Feet Manual 

340 €
36 Δόσεις 11,74€ / μήνα
Διαθέσιμο στην αποθήκη
Bstock

The Reference Premiere RP-502S surround speakers deliver the highest performing and encompassing sound possible. No other brand can bring this theater-quality surround sound experience into your home like Klipsch.HYBRID TRACTRIX® HORN TECHNOLOGYKlipsch proprietary Tractrix® horn-loaded technology ensures high-frequency energy of the Reference Premiere surround sound speaker is aimed directly at the listener and reduces unwanted, artificial reverb caused by indirect sound bouncing off walls - meaning you experience the most clear, detailed, lifelike sound possible.CERAMETALLIC™ WOOFERSKlipsch Proprietary Cerametallic™ woofers are the Reference Premiere surround sound speaker's signature statement for both sound and aesthetics. This extremely light, rigid materials holds its shape while being able to deliver lower frequencies with maximum efficiency.

899 €
24 Άτοκες Δόσεις 37,46€ / μήνα
Κατόπιν Παραγγελίας

The Reference Premiere RP-502S surround speakers deliver the highest performing and encompassing sound possible. No other brand can bring this theater-quality surround sound experience into your home like Klipsch.HYBRID TRACTRIX® HORN TECHNOLOGYKlipsch proprietary Tractrix® horn-loaded technology ensures high-frequency energy of the Reference Premiere surround sound speaker is aimed directly at the listener and reduces unwanted, artificial reverb caused by indirect sound bouncing off walls - meaning you experience the most clear, detailed, lifelike sound possible.CERAMETALLIC™ WOOFERSKlipsch Proprietary Cerametallic™ woofers are the Reference Premiere surround sound speaker's signature statement for both sound and aesthetics. This extremely light, rigid materials holds its shape while being able to deliver lower frequencies with maximum efficiency.

899 €
24 Άτοκες Δόσεις 37,46€ / μήνα
Κατόπιν Παραγγελίας

With airy high-frequencies, expressive midrange and surprisingly extended bass, the OPTICON LCR MK2 is an on-wall speaker that delivers genuine stereo and surround sound hi-fi performance.A flexible stereo and multichannel speakerThe OPTICON LCR MK2 incorporates the best technologies from the MK2 series in a low-profile, wall-mounted enclosure. Serving as a left, centre or right-channel speaker – hence the name LCR – this multipurpose, wall-mounted surround speaker delivers genuine stereo and multichannel Hi-Fi performance with impressive high-frequencies, an expressive midrange and surprisingly extended bass.Reducing distortion with Soft Magnetic CompoundThe OPTICON LCR MK2 driver magnet system consists of a large ferrite ring magnet surrounding a pole-piece manufactured entirely of the unique DALI SMC (Soft Magnetic Compound) material. The use of SMC greatly reduces mechanical distortion caused by hysteresis and eddy currents, resulting in a drastic reduction in third-order distortion for extended listening pleasure, a relaxed midrange and a surprising amount of detailing.The master of wide dispersionOur signature hybrid tweeter module marries a 29 mm soft dome tweeter with a custom 17 x 45 mm ribbon element. Both drivers are mounted on a cast aluminium faceplate, which provides a solid platform for the drivers and incorporates dispersion control detailing for optimal delivery of the high frequencies for off-axis listening. Our hybrid tweeter offers the best of both worlds – the clarity, speed and dynamics of a dome tweeter with the very high-frequency detail and smooth finesse of a ribbon tweeter.Low loss, low distortion and low colourationThe 6½" bass driver has been designed according to our sound design principles of low loss, low distortion and low colouration. The ideal driver plays only what the amplifier supplies... nothing is added, nothing is taken away. Every component is carefully designed to contribute towards this goal, including the paper pulp and wood fibre cone, which ensures minimal break-up resonance for a high resolution midrange and precise, coherent bass.Ensuring the highest quality productsWith a 25 mm thick front baffle and extra internal bracing, the OPTICON LCR MK2 cabinet is extremely rigid and practically eliminates panel resonance. To ensure the best possible quality product, we manufacture and test OPTICON MK2 series speakers at our production facilities in central Denmark, carrying out everything from cutting and routing of the wood laminate panels to installing the drivers and crossover.

899 €
36 Δόσεις 31,04€ / μήνα
Κατόπιν Παραγγελίας

With airy high-frequencies, expressive midrange and surprisingly extended bass, the OPTICON LCR MK2 is an on-wall speaker that delivers genuine stereo and surround sound hi-fi performance.A flexible stereo and multichannel speakerThe OPTICON LCR MK2 incorporates the best technologies from the MK2 series in a low-profile, wall-mounted enclosure. Serving as a left, centre or right-channel speaker – hence the name LCR – this multipurpose, wall-mounted surround speaker delivers genuine stereo and multichannel Hi-Fi performance with impressive high-frequencies, an expressive midrange and surprisingly extended bass.Reducing distortion with Soft Magnetic CompoundThe OPTICON LCR MK2 driver magnet system consists of a large ferrite ring magnet surrounding a pole-piece manufactured entirely of the unique DALI SMC (Soft Magnetic Compound) material. The use of SMC greatly reduces mechanical distortion caused by hysteresis and eddy currents, resulting in a drastic reduction in third-order distortion for extended listening pleasure, a relaxed midrange and a surprising amount of detailing.The master of wide dispersionOur signature hybrid tweeter module marries a 29 mm soft dome tweeter with a custom 17 x 45 mm ribbon element. Both drivers are mounted on a cast aluminium faceplate, which provides a solid platform for the drivers and incorporates dispersion control detailing for optimal delivery of the high frequencies for off-axis listening. Our hybrid tweeter offers the best of both worlds – the clarity, speed and dynamics of a dome tweeter with the very high-frequency detail and smooth finesse of a ribbon tweeter.Low loss, low distortion and low colourationThe 6½" bass driver has been designed according to our sound design principles of low loss, low distortion and low colouration. The ideal driver plays only what the amplifier supplies... nothing is added, nothing is taken away. Every component is carefully designed to contribute towards this goal, including the paper pulp and wood fibre cone, which ensures minimal break-up resonance for a high resolution midrange and precise, coherent bass.Ensuring the highest quality productsWith a 25 mm thick front baffle and extra internal bracing, the OPTICON LCR MK2 cabinet is extremely rigid and practically eliminates panel resonance. To ensure the best possible quality product, we manufacture and test OPTICON MK2 series speakers at our production facilities in central Denmark, carrying out everything from cutting and routing of the wood laminate panels to installing the drivers and crossover.

899 €
36 Δόσεις 31,04€ / μήνα
Κατόπιν Παραγγελίας

Το Theva Surround είναι το επιτοίχιο ηχείο της σειράς Theva. Ολοκληρώνει το σύστημα οικιακού κινηματογράφου και μπορεί να εγκατασταθεί εύκολα σε διαφορετικά σημεία ώστε να απολαμβάνετε πλήρη ηχητική εμπειρία surround. Διαθέτοντας ένα tweeter TNF και ένα woofer Slatefiber –και οι δύο αποκλειστικές τεχνολογίες Focal–προσφέρει μια ασυμβίβαστη εμπειρία ήχου. Κατασκευασμένο στη Γαλλία, το Theva Surround έχει σχέδιο με λεπτές, εκλεπτυσμένες λεπτομέρειες. Με μαύρο φινίρισμα, μεταλλικούς δακτυλίους, μαγνητική γρίλια και θέση αερισμού πίσω, κάθε λεπτομέρεια είναι εξαιρετικά προσεγμένη. Είναι ο τέλειος συνεργάτης για τα ηχεία Theva N°1, Theva N°2, Theva N°3, Theva N°3-D και Theva Center και το υπογούφερ SUB 600P, δημιουργώντας ένα εντυπωσιακό σύστημα Home Cinema.

795 €
12 Άτοκες Δόσεις 66,25€ / μήνα
Αναμένεται

DescriptionWhere versatility and discretion are concerned, M-1 has them in abundance. It’s equally suited to multi-channel or stereo sound, is an outstanding listen with or without a subwoofer, and comes complete with wall-bracket and table stand.'Anywhere' is the perfect positionM-1 is equally at home on a shelf or a wall, thanks to its swiveling multi-position foot, or its bespoke stand will bring it up to the perfect listening height. No matter where you position it, though, its sound will draw your attention.Coloured to blend in or stand outWith a choice of matte black or matte white finishes for both the cabinet and the perforated steel grille , M-1 is ready to blend into the background or make a bold statement — the choice is yours. Either way, it makes a sophisticated statement.Because your theatre is also your homeJudicious industrial design means M-1 will complement your lifestyle, not override it.

299 €
36 Δόσεις 10,32€ / μήνα
Διαθέσιμο στην αποθήκη

DescriptionWhere versatility and discretion are concerned, M-1 has them in abundance. It’s equally suited to multi-channel or stereo sound, is an outstanding listen with or without a subwoofer, and comes complete with wall-bracket and table stand.'Anywhere' is the perfect positionM-1 is equally at home on a shelf or a wall, thanks to its swiveling multi-position foot, or its bespoke stand will bring it up to the perfect listening height. No matter where you position it, though, its sound will draw your attention.Coloured to blend in or stand outWith a choice of matte black or matte white finishes for both the cabinet and the perforated steel grille , M-1 is ready to blend into the background or make a bold statement — the choice is yours. Either way, it makes a sophisticated statement.Because your theatre is also your homeJudicious industrial design means M-1 will complement your lifestyle, not override it.

299 €
36 Δόσεις 10,32€ / μήνα
Διαθέσιμο στην αποθήκη

Magnat Cinema Ultra RD THX-200 Ηχεία Surround 6,5'' Μαύρο. Ένας από τους κώνους tweeter 42 mm βρίσκεται σε κάθε κεκλιμένη πλευρά στο κέντρο των ισχυρών υπογούφερ 17 cm: Το Cinema Ultra RD 200-THX ακολουθεί την ιδανική δομή των κλασικών διπολικών ηχείων. Τα δύο tweeters-όπως ορίζεται από το THX®-συνδέονται μαζί με  αντίστροφη πολικότητα για να παράγουν ένα διάχυτο, πολύ τρισδιάστατο ηχητικό τοπίο. Επειδή ο κώνος μας λειτουργεί σε μια εξαιρετικά ευρεία ζώνη, το Cinema Ultra RD 200-THX δημιουργεί αυτό το επιθυμητό διάχυτο ηχητικό πεδίο από τα 1500 hertz. Παρά το μικρό του μέγεθος και το μέτριο συνολικό βάθος μόλις 16 εκατοστών, το ηχείο εφέ είναι ικανό για εντυπωσιακά επίπεδα ήχου - ένας σημαντικός παράγοντας για τον καλύτερο ήχο κινηματογράφου. Και η βέλτιστη εγκατάσταση είναι επίσης παιχνίδακι χάρη στον μεγάλο αριθμό επιλογών τοποθέτησης στον τοίχο, συμπεριλαμβανομένων των βραχιόνων VESA. Ακόμα και οι ίδιοι οι ειδικοί της THX έμειναν έκπληκτοι και έπρεπε να μας επαινέσουν στο τέλος: Το μπροστινό μεγάφωνο LCR 100-THX του συστήματος Magnat Cinema Ultra είναι το πρώτο στον κόσμο που του απονεμήθηκε η αυστηρή άδεια THX Ultra2 - αν και ήταν σχεδιασμένο τόσο για οριζόντια όσο και για κάθετη λειτουργία. Και επειδή είναι επίσης ένα από τα πιο συμπαγή μπροστινά/κεντρικά ηχεία που έχουν πιστοποιηθεί ποτέ, ένας από τους σημαντικότερους στόχους μας έχει ήδη επιτευχθεί: μέγιστη ευελιξία ρύθμισης. To THX Ultra2 είναι το πιο απαιτητικό από ποτέ για τους οικιακούς κινηματογράφους από την THX. Αυτό δεν αφορά μόνο τα βέλτιστα χαρακτηριστικά διασποράς των μπροστινών και εφέ ηχείων αλλά επίσης καθαρή ένταση. Για παράδειγμα, το Ultra2 απαιτεί ένταση 117 ντεσιμπέλ στην περιοχή μπάσων - που αντιστοιχεί σε βροντές σε κοντινή αππόσταση. Το subwoofer του συστήματος, Cinema Ultra Sub 300-THX πληρεί αυτές τις απαιτήσεις χωρίς κόπο. Τα μπροστινά και πίσω ηχεία του συστήματος έχουν επίσης αναπτυχθεί για να εξασφαλίσουν σταθερότητα στο επίπεδο και εξαιρετικά χαμηλή παραμόρφωση. Μια συναρπαστική ταινία δράσης με εντυπωσιακά μπάσα ακούγεται απόλυτα ρεαλιστική με το σύστημα Cinema Ultra. Θα μπορείτε να ακούσετε και ακόμη και να νιώσετε κάθε λεπτομέρεια - υπόσχεση! Χρειάστηκε μια τρομερή τεχνική προσπάθεια για να επιτευχθεί αυτό. Για παράδειγμα, έχουμε αναπτύξει αυτό που είναι ίσως ο μεγαλύτερος κώνος tweeter στον κόσμο με διάμετρο 42 χιλιοστά. Μόνο με αυτό θα μπορούσαν να εφαρμοστούν οι αυστηρές οδηγίες σχετικά με το μεγάλο εύρος ζώνης και την ελευθερία από παραμόρφωση. Το μπροστινό ηχείο Cinema Ultra 100-THX διαθέτει ένα από αυτά τα tweeters παγκόσμιας πρώτης, ενώ τα δίπολα ηχεία Cinema Ultra RD 200-THX έχουν δύο από αυτά! Ωστόσο, το subwoofer 17 εκατοστών με το διάφραγμα αλουμινίου-κεραμικού (που χρησιμοποιείται στο μπροστινό μέρος και τα ηχεία εφέ) και τα μπάσα υψηλής απόδοσης 32 εκατοστών του subwoofer είναι επίσης νέες εξελίξεις, με ιδιότητες χαμηλής παραμόρφωσης που θέτουν νέα πρότυπα. Και μπορείτε να το ακούσετε αμέσως: Τα ακουστικά μοτίβα είναι χωρίς παραμόρφωση, πλούσια σε λεπτομέρειες και εξαιρετικά διαφανή ακόμη και σε πολύ υψηλά επίπεδα. Αυτός είναι ο λόγος για τον οποίο η μουσική σε στερεοφωνική μορφή ακούγεται επίσης απίστευτα καλά με το Cinema Ultra. Όλες οι κατασκευές Cinema Ultra έχουν κομψά διακριτικές επιφάνειες - το "stealth look" μας. Σε έναν οικιακό κινηματογράφο, τα ηχεία πρέπει να προσελκύουν την προσοχή παράγοντας τον καλύτερο ήχο, όχι λόγω λαμπερών επιφανειών. Για το λόγο αυτό, αποφύγαμε τις επιφάνειες που αντανακλούν και δώσαμε επίσης προσοχή στα μικρά πράγματα: ακόμη και τα μεταλλικά λογότυπα της Magnat δεν έχουν λαμπερό φινίρισμα αλουμινίου αλλά, μάλλον, μια λεπτή βουρτσισμένη εμφάνιση τιτανίου. ΤΕΛΕΙΑ ΧΩΡΙΚΗ ΑΝΑΠΑΡΑΓΩΓΗ Η τεράστια ευελιξία του Cinema Ultra ισχύει ακόμη και για την αναπαραγωγή ηχογραφήσεων Dolby Atmos. Το Dolby Atmos βασίζεται σε μεγάλο αριθμό επιπλέον εικονικών καναλιών και αντιπροσωπεύει ένα σημαντικό βήμα προς τον τέλειο τρισδιάστατο ήχο surround. Για αυτήν τη διαδικασία αναπαραγωγής, έχουμε αναπτύξει, με το Cinema Ultra AEH 400-Atmos, ένα συμπαγές ομοαξονικό μεγάφωνο που εφαρμόζει τις οδηγίες της Dolby σε σχέση με τα χαρακτηριστικά διασποράς. Τέσσερα από αυτά τα πρόσθετα ηχεία μετατρέπουν το "απλό" μας σύστημα THX Ultra2 σε διαμόρφωση Dolby Atmos. Και ο ήχος πραγματικά κόβει την ανάσα.

806 ,65 €
36 Δόσεις 27,85€ / μήνα
Κατόπιν Παραγγελίας

The Bronze FX has a beautiful new form and has been designed to immerse you in compelling surround sound. Our renowned driver technology ensures an unforgettable home cinema performance. Nothing enhances the home cinema experience like a dedicated surround sound speaker. The compact, discreet design of the Bronze FX incorporates two 25 mm C-CAM Gold Dome tweeters with UD Waveguide and a 5 1/2" C-CAM mid-bass driver to deliver the Monitor Audio sonic magic. We are masters of effects speaker design and the new Bronze FX delivers our renowned surround sound experience to maximum effect. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered grilles for a more discreet appearance Angled baffles for optimal dispersion Discreet design with flush wall placements – recessed terminations Dedicated keyhole wall-mounts included for easy installation Switchable di-pole/ bi-pole configuration – for use when needing to change the phasing for AV systems – handed pairs Sealed cabinet for accurate performance when installed in restricted voids or close to a wall Specifications: System Format: 2-Way Frequency Response (-6 dB): 88 – 25,000 Hz (Free field), 74 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 86 dB Nominal Impedance: 8 ohms Minimum Impedance: 4 ohms Maximum SPL: 108 dBA (pair) Power Handling (RMS): 80 W Recommended Amplifier Requirements: 20 — 80 W Bass Alignment: Sealed Cabinet Crossover Frequency: 2,800 Hz Drive Unit Complement: 1 x 51/2" C-CAM mid-range driver, 2 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 287 x 284 x 124 mm (115/16 x 113/16 x 47/8") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): N/A Weight (each): 3.9 kg (8 lb 10 oz) Sold As: Pair

425 €
36 Δόσεις 14,67€ / μήνα
Κατόπιν Παραγγελίας

The Bronze FX has a beautiful new form and has been designed to immerse you in compelling surround sound. Our renowned driver technology ensures an unforgettable home cinema performance. Nothing enhances the home cinema experience like a dedicated surround sound speaker. The compact, discreet design of the Bronze FX incorporates two 25 mm C-CAM Gold Dome tweeters with UD Waveguide and a 5 1/2" C-CAM mid-bass driver to deliver the Monitor Audio sonic magic. We are masters of effects speaker design and the new Bronze FX delivers our renowned surround sound experience to maximum effect. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered grilles for a more discreet appearance Angled baffles for optimal dispersion Discreet design with flush wall placements – recessed terminations Dedicated keyhole wall-mounts included for easy installation Switchable di-pole/ bi-pole configuration – for use when needing to change the phasing for AV systems – handed pairs Sealed cabinet for accurate performance when installed in restricted voids or close to a wall Specifications: System Format: 2-Way Frequency Response (-6 dB): 88 – 25,000 Hz (Free field), 74 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 86 dB Nominal Impedance: 8 ohms Minimum Impedance: 4 ohms Maximum SPL: 108 dBA (pair) Power Handling (RMS): 80 W Recommended Amplifier Requirements: 20 — 80 W Bass Alignment: Sealed Cabinet Crossover Frequency: 2,800 Hz Drive Unit Complement: 1 x 51/2" C-CAM mid-range driver, 2 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 287 x 284 x 124 mm (115/16 x 113/16 x 47/8") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): N/A Weight (each): 3.9 kg (8 lb 10 oz) Sold As: Pair

425 €
36 Δόσεις 14,67€ / μήνα
Κατόπιν Παραγγελίας

Τα νέα Chora Surround έρχονται να συμπληρώσουν τα πλαϊνά και τα πίσω κανάλια στο Home Cinema σας για μια ακόμη πιο συναρπαστική εμπειρία. Ο ήχος έρχεται πλέον από όλες τις πλευρές, τονίζοντας τον ρεαλισμό των σκηνών αυξάνοντας τις αισθήσεις σας. Κατασκευασμένα στη Γαλλία στα εργαστήρια της Focal, τα Chora Surround χρησιμοποιούν την ίδια τεχνολογία μεγαφώνου Slatefiber που ενσωματώνει σε όλα τα ηχεία της σειράς Chora, εξασφαλίζοντας έτσι υψηλής ποιότητας ηχητική συνοχή με τα άλλα ηχεία της ίδιας σειράς. Σχεδιασμένα για να ολοκληρώσουν το Surround ηχοσύστημά σας, τα ηχεία αυτά συνδυάζονται τέλεια με τα Chora 826-D «Dolby Atmos» και το κεντρικό Chora Center. Τέλος, αυξήστε με τον καλύτερο δυνατό τρόπο το βάθος και τον όγκο του ήχου σας, με το νέο Subwoofer Sub 600P. Προδιαγραφές: Τύπος: Στερεοφωνικό μεγάφωνο surround διπλής κατεύθυνσης Mid Woofer Slatefiber 61/2 "(20 mm), ανεστραμμένο tweeter TNF Al / Mg Ευαισθησία (2,83V / 1m): 89dB Απόκριση συχνότητας (± 3 dB): 80Hz - 28kHz Σημείο χαμηλής συχνότητας (-6 dB): 67Hz Ονομαστική αντίσταση: 8Ω Ελάχιστη αντίσταση: 4,5Ω Συνιστώμενη ισχύς ενισχυτή: 25 / 100W Συχνότητα διέλευσης: 3,000Hz Διαστάσεις (HxWxD): 171 / 2x315 / 16x1215 / 8 "(44,5x10x32cm) Καθαρό βάρος (με μάσκα): 12 λίβρες (5.45 κιλά) Διαστάσεις συσκευασίας (HxWxD): 221 / 16x71 / 8x181 / 2 "(56x18x47cm) Καθαρό βάρος (με συσκευασία): 15.7lbs (7.1kg)

799 €
12 Άτοκες Δόσεις 66,58€ / μήνα
Άμεσα Διαθέσιμο

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

598 €
Άτοκες Δόσεις 199,33€ / μήνα
Διαθέσιμο στην αποθήκη

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

598 €
Άτοκες Δόσεις 199,33€ / μήνα
Διαθέσιμο στην αποθήκη

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

598 €
Άτοκες Δόσεις 199,33€ / μήνα
Διαθέσιμο στην αποθήκη

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

598 €
Άτοκες Δόσεις 199,33€ / μήνα
Διαθέσιμο στην αποθήκη

The PF7SR surround sound speaker is designed to reproduce surround effects as part of a home cinema installation. Equipped with drivers oriented toward different points in the room, this speaker is necessary to reproduce all the atmospheric surround sound effects of films, TV series and concerts. With the Elipson Prestige Facet 7 SR, the lateral walls of the listening room are used to offer a much more immersive listening experience. These speakers handle the full range of immersive multichannel formats and completely surround the listener with sound. They have inherited all the trademarks of the Prestige Facet range: an elegant design, high-quality materials, a meticulous finish... The passive filter is composed of audiophile-grade components to offer a particularly precise and detailed listening experience. This surround speaker offers the unique feature of functioning in dipole mode (one or two channels). It is equipped with a 5,52'' mid-low driver and two 25 mm horn-loaded tweeters to offer ultra-efficient directivity and add a few surprises to the listening experience. Its frequency response ranges from 65 Hz et 20 kHz à ± 3 dB Its dual binding posts allow it to be connected to the surround and rear surround channels of a home cinema receiver. The energy and detail offered by this speaker make it an ideal choice for a 5.1 or 7.1 home cinema installation. Specifications : Speaker Surround Fixation On-Wall Number of way 2 Power 80 W RMS Tweeter Horn 2 x 1 " Mid-bass driver 5,52 " Frequency Response (±3 dB)65 Hz - 25 kHz Sensitivity 87 dB/1W/1m Impedance 8 Ohms Finish MDF box, Vinyl veneer Dimensions (W x H x D)380 x 220 x 140 mm Weight 5 kg Dimensions packaging (W x H x D)455 x 310 x 455 mm Weight with packaging, unit11,1 kg

290 €
12 Άτοκες Δόσεις 24,17€ / μήνα
Κατόπιν Παραγγελίας

FAZON SAT is a two-way designed satellite loudspeaker including a 4½” mid/woofer with wood fibre cone and an oversized 28mm/1.1” soft dome tweeter with a powerful neodymium magnet system. The drivers share the same technology platform as the drivers developed for the acclaimed MENTOR and IKON series.  Equipped with a 360º pivoting wall bracket, FAZON SAT offers a flexible and innovative “Twist ‘n‘ Tilt” function. You can angle the speaker precisely horizontally and vertically; tilt it up or down, swivel it to either side and even mount it upside down.The loudspeakers are delivered with a handy table stand for easy placement on a TV table, bookshelf, etc. The elegant and curved cabinet body is a combination of high gloss lacquered aluminium and composite material for the baffle. The surface of the baffle is treated with a rubbery coating for a smooth, elegant touch. The grille, which conceals and protects the drivers and the baffle, is held in place with magnets - allowing quick, easy removal with no visible signs of mounting pegs on the grille. Simple and stylish satellite speakers.FAZON SAT 5.1-3Awarded the highly acclaimed ‘Best Style Package for 2011’ by What HiFi, these compact DALI speakers will not let you down. An aesthetically pleasing set-up consisting of 5 identical speakers, assisted by the SUB E-12 F. The FAZON SAT pleases eyes and ears alike. WOOD FIBRE CONESLow-loss drivers made of low-mass paper cones with wood fibre reinforcement. The driver technology builts on the MENTOR and IKON series.CURVED DESIGNThe FAZON series is based on a curved design that Illiminates reflections and standing waves.DALI DRIVER TECHNOLOGYBuild around the traditional ultra light soft dome tweeter and the well known wood fibre cone low-loss woofer, every speaker in the FAZON series is a master of audio reproduction.INTELLIGENT TERMINALSEvery speaker in the FAZON series has an intelligent terminal solution that is perfectly aligned with the user scenarios of the speaker. Specifications : Product seriesFAZONFrequency Range (+/-3 dB) [Hz]86 - 25,000Sensitivity (2,83 V/1 m) [dB]86.0Nominal Impedance [ohms]6Maximum SPL [dB]104Recommended Amplifier Power [W]20 - 120Crossover Frequency [Hz]1,800 HzHigh frequency driver, Quantity1 x 28 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4.5"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire Magnetic ShieldingNoRecommended PlacementCentre / Soundbar On-Wall Shelf or stand Dimensions With Base (HxWxD) [mm]  287 x 146 x 172 (with table stand)Dimensions (HxWxD) [mm]255.5 x 138 x 87Weight [kg]2.4Accessories IncludedAssembly Tools Manual Table Stand Wall Bracket  

329 €
36 Δόσεις 11,36€ / μήνα
Κατόπιν Παραγγελίας

True Hi-Fi sound really can come in a small and elegant design. With its curved high-gloss lacquered aluminium cabinet, coated composite front baffle and snug fitting grille the ultra-compact FAZON MIKRO fits perfectly in any living room. This compact loudspeaker is built around the renowned DALI trademark wood fibre cone driver and soft dome tweeter module.The 4” woofer delivers an accurate, detailed and dynamic sonic reproduction of music or movie sound, and the extremely strong cabinet design ensures that acoustic and mechanical resonances are almost non-existent. The 20 mm ultra-light soft dome tweeter enables the FAZON MICRO to deliver a richly detailed mid-range, and to extend the high frequency well beyond the audible range. Featuring as the centrepiece in a 5.1 surround system, working in a stereo setup or acting as rear speakers with any of the other FAZON models the FAZON MIKRO will always surprise and delight whether you are listening to music or watching a movie. The FAZON MIKRO is true Hi-Fi in a very small package.Wall bracketThe ingenious multi-function bracket enables simple wall mounting of both the FAZON MIKRO and FAZON VOKAL. The close placement to the wall not only looks good but also increases the lower bass performance.Push Button Terminals. Easy to use push button terminals make connecting the speaker cables simple and ensure a tight and optimum connection that will not loosen over time.FAZON MIKRO 5.1Positioning a complete surround system in a discreet and elegant way can be a daunting task. FAZON MIKRO offers a stylish and unobtrusive solution to this problem and allows you to have a full 5.1 surround system in your living room that delivers a true hi-fi audio performance. Paired with the FAZON SUB 1 you have the perfect solution for a small living room. DIE-CAST ALUMINIUMThe fluid, organic lines of the die-cast aluminium enclosures combined with enhanced structural integrity, reduced vibration and no parallel surfaces, all key elements in the pure, musical tone of these masterful loudspeakers.CURVED DESIGNThe FAZON series is based on a curved design that Illiminates reflections and standing waves.DALI DRIVER TECHNOLOGYBuild around the traditional ultra light soft dome tweeter and the well known wood fibre cone low-loss woofer, every speaker in the FAZON series is a master of audio reproduction.INTELLIGENT TERMINALSEvery speaker in the FAZON series has an intelligent terminal solution that is perfectly aligned with the user scenarios of the speaker. Specifications : Frequency Range (+/-3 dB) [Hz]95 - 25,000Sensitivity (2,83 V/1 m) [dB]84.0Nominal Impedance [ohms]6Maximum SPL [dB]101Recommended Amplifier Power [W]30 - 120Crossover Frequency [Hz]2,560 HzHigh frequency driver, Quantity1 x 20 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire Magnetic ShieldingNoRecommended PlacementOn-Wall Shelf or stand Recommended Distance From Wall [cm]  0 - 50Dimensions With Base (HxWxD) [mm]196 x 113 x 96Weight [kg]1.5Accessories IncludedManual Rubber Pads Wall Bracket Wall Bracket Bumper Optional AccessoriesBlack Grille Floor Stand White Grille 

214 €
36 Δόσεις 7,39€ / μήνα
Κατόπιν Παραγγελίας

The DALI ALTECO C-1 is truly a multipurpose speaker in both design and function. DALI wanted to ensure that the ALTECO C-1 is usable as both a height speaker as well as a traditional stereo speaker. By designing the crossover for stereo use and by keeping a strict focus on DALI sound design principles, we have created a speaker that fulfills both criteria. It is the perfect fit for adding height information to a surround setup or taking the role as an out-of-the-way stereo speaker.The ALTECO C-1 delivers believable height information from Atmos, DTS-X and Auro-3D movies in surround setup - not only when “firing up” using the ceiling as a reflector, but also “firing down” from a position up under the ceiling.The ALTECO C-1 is able to achieve this even without special equalizing in order to enhance the effects from HRTF (Head Related Transfer Function) technology. A technology found in Atmos certified speakers.Instead the ALTECO C-1 relies only on the height processing done in the amplifier, when selected. Had we included non-linear HRTF equalizing in the ALTECO C1, it would have been impossible to use it as a versatile neutral speaker, limiting the use to only an up-firing type speaker.Designed the way it is the DALI ALTECO C-1 offers the best from several worlds giving you ultimate flexibility and multiple applications. DUAL SOUND MODEThe unique angular design combined with the dual sound mode enables this speaker to be used in a multitude of different scenarios. Choose 'UP' on the front baffle switch to beam the sound waves either straight out for a soft downwards angle, or by selecting 'DOWN', beaming the sound almost straight down for close position listening.UP-FIRINGThe angular design of this speaker makes it perfect for up-firing use. Combined with a surround receiver that has the ability to render height information (Dolby Atmos, DTS-X or Auro-3D), placing it on top of the front speakers, and even on top of the rear speakers will offer an excellent ceiling reflected rendering of height information in compatible movies and concerts.WOOD FIBRE CONESOur low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.SOFT DOME TWEETERThe dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from our high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2). Specifications :Product seriesALTECOFrequency Range (+/-3 dB) [Hz]74 - 25,000 HzSensitivity (2,83 V/1 m) [dB]83.0 dBNominal Impedance [ohms]6 ohmsMaximum SPL [dB]103 dBRecommended Amplifier Power [W]40 - 100 WattCrossover Frequency [Hz]2,100 HzCrossover Principle2-wayHigh frequency driver, Quantity1 x 21 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4.5"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire (Spring loaded push button) Recommended PlacementOn-Wall On speaker Recommended Distance From Wall [cm]    1 - 100 cmDimensions (HxWxD) [mm]265 x 160 x 200Weight [kg]2.9 kgAccessories IncludedRubber Feet Manual 

369 €
36 Δόσεις 12,74€ / μήνα
Κατόπιν Παραγγελίας

The DALI ALTECO C-1 is truly a multipurpose speaker in both design and function. DALI wanted to ensure that the ALTECO C-1 is usable as both a height speaker as well as a traditional stereo speaker. By designing the crossover for stereo use and by keeping a strict focus on DALI sound design principles, we have created a speaker that fulfills both criteria. It is the perfect fit for adding height information to a surround setup or taking the role as an out-of-the-way stereo speaker.The ALTECO C-1 delivers believable height information from Atmos, DTS-X and Auro-3D movies in surround setup - not only when “firing up” using the ceiling as a reflector, but also “firing down” from a position up under the ceiling.The ALTECO C-1 is able to achieve this even without special equalizing in order to enhance the effects from HRTF (Head Related Transfer Function) technology. A technology found in Atmos certified speakers.Instead the ALTECO C-1 relies only on the height processing done in the amplifier, when selected. Had we included non-linear HRTF equalizing in the ALTECO C1, it would have been impossible to use it as a versatile neutral speaker, limiting the use to only an up-firing type speaker.Designed the way it is the DALI ALTECO C-1 offers the best from several worlds giving you ultimate flexibility and multiple applications. DUAL SOUND MODEThe unique angular design combined with the dual sound mode enables this speaker to be used in a multitude of different scenarios. Choose 'UP' on the front baffle switch to beam the sound waves either straight out for a soft downwards angle, or by selecting 'DOWN', beaming the sound almost straight down for close position listening.UP-FIRINGThe angular design of this speaker makes it perfect for up-firing use. Combined with a surround receiver that has the ability to render height information (Dolby Atmos, DTS-X or Auro-3D), placing it on top of the front speakers, and even on top of the rear speakers will offer an excellent ceiling reflected rendering of height information in compatible movies and concerts.WOOD FIBRE CONESOur low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.SOFT DOME TWEETERThe dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from our high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2). Specifications :Product seriesALTECOFrequency Range (+/-3 dB) [Hz]74 - 25,000 HzSensitivity (2,83 V/1 m) [dB]83.0 dBNominal Impedance [ohms]6 ohmsMaximum SPL [dB]103 dBRecommended Amplifier Power [W]40 - 100 WattCrossover Frequency [Hz]2,100 HzCrossover Principle2-wayHigh frequency driver, Quantity1 x 21 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4.5"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire (Spring loaded push button) Recommended PlacementOn-Wall On speaker Recommended Distance From Wall [cm]    1 - 100 cmDimensions (HxWxD) [mm]265 x 160 x 200Weight [kg]2.9 kgAccessories IncludedRubber Feet Manual 

369 €
36 Δόσεις 12,74€ / μήνα
Κατόπιν Παραγγελίας

The DALI ALTECO C-1 is truly a multipurpose speaker in both design and function. DALI wanted to ensure that the ALTECO C-1 is usable as both a height speaker as well as a traditional stereo speaker. By designing the crossover for stereo use and by keeping a strict focus on DALI sound design principles, we have created a speaker that fulfills both criteria. It is the perfect fit for adding height information to a surround setup or taking the role as an out-of-the-way stereo speaker.The ALTECO C-1 delivers believable height information from Atmos, DTS-X and Auro-3D movies in surround setup - not only when “firing up” using the ceiling as a reflector, but also “firing down” from a position up under the ceiling.The ALTECO C-1 is able to achieve this even without special equalizing in order to enhance the effects from HRTF (Head Related Transfer Function) technology. A technology found in Atmos certified speakers.Instead the ALTECO C-1 relies only on the height processing done in the amplifier, when selected. Had we included non-linear HRTF equalizing in the ALTECO C1, it would have been impossible to use it as a versatile neutral speaker, limiting the use to only an up-firing type speaker.Designed the way it is the DALI ALTECO C-1 offers the best from several worlds giving you ultimate flexibility and multiple applications. DUAL SOUND MODEThe unique angular design combined with the dual sound mode enables this speaker to be used in a multitude of different scenarios. Choose 'UP' on the front baffle switch to beam the sound waves either straight out for a soft downwards angle, or by selecting 'DOWN', beaming the sound almost straight down for close position listening.UP-FIRINGThe angular design of this speaker makes it perfect for up-firing use. Combined with a surround receiver that has the ability to render height information (Dolby Atmos, DTS-X or Auro-3D), placing it on top of the front speakers, and even on top of the rear speakers will offer an excellent ceiling reflected rendering of height information in compatible movies and concerts.WOOD FIBRE CONESOur low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.SOFT DOME TWEETERThe dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from our high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2). Specifications :Product seriesALTECOFrequency Range (+/-3 dB) [Hz]74 - 25,000 HzSensitivity (2,83 V/1 m) [dB]83.0 dBNominal Impedance [ohms]6 ohmsMaximum SPL [dB]103 dBRecommended Amplifier Power [W]40 - 100 WattCrossover Frequency [Hz]2,100 HzCrossover Principle2-wayHigh frequency driver, Quantity1 x 21 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4.5"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire (Spring loaded push button) Recommended PlacementOn-Wall On speaker Recommended Distance From Wall [cm]    1 - 100 cmDimensions (HxWxD) [mm]265 x 160 x 200Weight [kg]2.9 kgAccessories IncludedRubber Feet Manual 

359 €
36 Δόσεις 12,39€ / μήνα
Κατόπιν Παραγγελίας

Surround ηχείο 2 δρόμων Το Surround Be διαθέτει αποκλειστικό σχεδιασμό "Bi / Twin" με διπλές εισόδους, επιτρέποντας τη χρήση του μεγαφώνου τόσο σε λειτουργία 5.1 (διπολική λειτουργία) είτε σε λειτουργία 7.1 (διπλή μονοφωνική λειτουργία). Αυτή η λειτουργία αποφεύγει να έχετε πολλαπλά ηχεία surround στο Home Cinema σας. Το Surround Be αποτελείται από: 2 x 61/2 "(16,5cm)" W "κωνικό bass/mid woofer. 2 x tweeters ανεστραμμένου θόλου από Beryllium  

4.950 €
12 Άτοκες Δόσεις 412,50€ / μήνα
Κατόπιν Παραγγελίας

Το Aria SR είναι ένα περιφερειακό ηχείο με χαρακτηριστικά και ήχο, ίδιο με τα άλλα μεγάφωνα της σειράς Aria της Focal.Σε συνδυασμό με τα ηχεία Aria 936, το κεντρικό ηχείο Aria CC 900 και το subwofer Sub 300 P, τα surround ηχεία Aria SR 900 σας εξασφαλίζουν έναν home cinema 5.1!Αποτελείται από δύο woofer 5 "(13cm) με μεγάφωνα τεχνολογίας Flax sandwich , παρέχει φυσικά μεσαία, πλούσιο μπάσο, και εξαιρετικές υψηλές με φυσικό ήχο.Διαθέτει δύο tweeters TNF από αλουμίνιο και μαγνήσιο με Poron ανάρτηση.Το waveguide βελτιώνει την οριζόντια κατευθυντικότητα και παρέχει μια πιο ακριβή στερεοφωνική εικόνα.Το ηχείο SR 900 είναι συμπαγές. Είναι εύκολο να ενσωματωθεί στο εσωτερικό σας χρησιμοποιώντας το παρεχόμενο σύστημα τοποθέτησης Polyfix.Το μεγάφωνο Flax (λινό) κατασκευάζεται στη Γαλλία αποκλειστικά από την Focal από το 2013. Με τον αρχικό σχεδιασμό τους, ο κώνος είναι κατασκευασμένος για την μέγιστη ακουστική απόδοση.Είναι κατασκευασμένα από υψηλής ποιότητας ίνες λινού που περιβάλλονται από δύο λεπτά στρώματα γυάλινων ινών.Τα μεγάφωνα Flax χαρακτηρίζονται από τον φυσικό τους ήχο, με ελάχιστο χρωματισμό, πλούσια μεσαία περιοχή και το πολύ καθαρό μπάσο τους. Χαρακτηριστικά:Νέος κώνος από λινόΝέο tweeter TNFΤα μεγάφωνα αναπτύχθηκαν και κατασκευάστηκαν στη Γαλλία από το FocalΔιαθέσιμα χρώματα: μαύρο γυαλιστερό και το καρυδιάΔερμάτινο σώμα

1.598 €
24 Άτοκες Δόσεις 66,58€ / μήνα
Κατόπιν Παραγγελίας

Μικρά αλλά πολύ ισχυρά ! Ηχεία δύο δρόμων-δορυφόροι με bass-reflex. Βυθιστείτε στο σύμπαν του Sib Evo, την εξέλιξη της εμβληματικής σειράς Sib & Co! Αυτά τα μικρά ηχεία μπορούν να τοποθετηθούν  παντού χάρη στο διαχρονικό και φουτουριστικό σχεδιασμό τους. Αφήστε τον εαυτό σας να ενθουσιαστεί από την ποιότητα και τη δύναμη του ήχου τους, παρά το μικρό τους μέγεθος! Το Sib Evo προσφέρει σημαντική ακουστική ισχύ. Έτσι, η στάθμη μπορεί να είναι δυνατή, χωρίς ποτέ να περιορίζεται από το μέγεθος του ενισχυτή. Θα προσθέσει μια νέα διάσταση ήχου στη μουσική σας, για να καλύψετε ένα χώρο, σύστημα πολλαπλών δωματίων (multi-room) ή σε ένα Home Cinema. Το  Sib Evo θα αποδώσει τέλεια τη μουσική, καθώς και τον διάλογο και την πλήρη ένταση της δράσης ή του συναισθήματος. Όλα τα βασικά στοιχεία της ταινίας μεταφέρονται με ακρίβεια και ακρίβεια, δίνοντάς σας την εντύπωση ότι βρίσκεστε ακριβώς στην καρδιά της δράσης. Σε χρήση στέρεο, η σε συνδυασμό με το subwoofer Cub Evo, η σαν συνολικό πακέτο 5.1 και 5.1.2 μαζί με το Sib Evo Dolby Atmos®, σας προσφέρει ένα σύστημα Home Cinema σε εντελώς νέα διάσταση. Μια επανάσταση για την μουσική και τις ταινίες σας! Μπορεί να τοποθετηθεί σε έπιπλα, να τοποθετηθεί στη βάση του ή να στερεωθεί σε τοίχο χρησιμοποιώντας ένα σύστημα τοποθέτησης. Αυτό το πακέτο Sib Evo 2.0 αποτελείται από δύο μεγάφωνα Sib Evo                                        

199 €
12 Άτοκες Δόσεις 16,58€ / μήνα
Κατόπιν Παραγγελίας