Ενισχυτές Ακουστικών Φορητοί

It’s head-fi. It’s desk-fi. And it’s hi-fi.The NEO iDSD 2 is our versatile new 3-in-1 DAC/Amp, designed specifically for CAS audiophiles. It pairs effortlessly with your headphones as a Head-Fi DAC/Amp, can be used as a pure DAC with your integrated amplifier, or serve as a DAC/Preamp for your active speakers and power amplifier.It features the latest Bluetooth 5.4, supporting the new aptX Lossless, the only Bluetooth codec capable of streaming lossless CD-quality audio without sacrificing audio quality.The NEO iDSD 2 has improved headphone and line outputs, providing ample power for your high-demanding headphones, as well as power amplifiers.My Blue isn’t your blue. It’s new and Lossless.The NEO iDSD 2 features the latest Bluetooth 5.4 technology, supporting the new aptX Lossless codec, which provides a maximum bitrate of 1,200kbps. In comparison, aptX Adaptive has a maximum bitrate of 420kbps, while LDACTM offers a higher bitrate of 990kbps.However, aptX Lossless is the first and only Bluetooth codec capable of streaming CD-quality audio without using a compression method that degrades sound quality. While other Bluetooth codecs claim to support CD-quality and even hi-res audio, they employ lossy compression during transmission, which negatively affects sound quality.The NEO iDSD 2 used Qualcomm’s new QCC518x Bluetooth audio chip, is qualified to Bluetooth 5.4, supported all* Bluetooth formats including: aptX Lossless, aptX Adaptive, aptX, LDACTM, LHDC/HWA, AAC and SBC.*As of 22 Sep 2023. Check your device for Bluetooth codec support.**LDAC and LDAC logo are trademarks of Sony Corporation.5x more headphone output power than its predecessor.You heard me correctly – the headphone output power of the NEO iDSD 2 is a whopping 5 times more powerful than that of the 1st-gen NEO iDSD. With a maximum headphone output power of 5,551 mW (@ 32Ω), it outperforms even some dedicated headphone amplifiers, making them sweat. The headphone section has seen significant improvement, as we’ve essentially integrated a Diablo headphone circuit into it.It features Auto iEMatch to reduce annoying hiss from high-sensitivity headphones without losing any dynamic range and four gain settings ranging from -12dB to +16dB, making it suitable for all your IEMs and headphone types, from super-sensitive to power-hungry.The NEO iDSD 2 is not only a powerhouse, but it’s also tailored for your ears. The newly added analogue processing modes, XSpace and XBass II, along with the four digital filters, allow you to finetune the sound. Both XSpace and XBass II are pure analogue signal processing modes designed to adjust the soundstage and low-frequency response to match your headphones.Stand by you. No matter up or down.Whether you’re using the NEO iDSD 2 as a Desk-Fi or Hi-Fi, you can position it horizontally or vertically. The new 2-inch colour display automatically rotates to suit the orientation.When using it as a Desk-Fi, you can position it vertically on your desk to save space. Set it to variable output, and with its powerful 19.5V maximum balanced output, it works well with your active speakers with volume control. The volume control is analogue, which is superior to any digital volume control.When using the NEO iDSD 2 as a Hi-Fi, you can place it horizontally. It can serve as a pure DAC, playing all Hi-Res music files from PCM 32-bit/768kHz to DSD512 and full MQA decoding. You can also connect it directly to your power amplifier as a preamplifier, utilising its analogue volume control.GMT Femto-Precision Clock. Upgradable.The internal GMT femto-precision clock, combined with a smart storage cache, forms an advanced jitter reduction system. It effectively reduces jitter in the digital signal, producing cleaner and more accurate sound.If you possess a more accurate external clock, or if you wish to synchronize with other devices such as CD players or network streamers that have an external clock input, you can connect both the NEO iDSD 2 and the other devices to the external clock via the 10MHz External Sync Clock input for even greater clock signal accuracy.It’s rare to find an External Sync Clock input in this price range. Even if you don’t have an external clock, the internal GMT femto-precision clock still offers excellent performance in its class.More than new features. Enhanced circuitry.The NEO iDSD 2’s enhanced PureWave circuit design, with its balanced dual-mono topology and short signal paths, is known for outstanding linearity and minimal noise and distortion, offering you exceptional sonic purity.The results are an improved Signal-to-Noise Ratio (SNR) of >120dB(A), Dynamic Range (DNR) of -120dB(A), and Total Harmonic Distortion plus Noise (THD+N) of

Portable DAC/Headphone Amplifier Simply without equal. Mojo 2 is the most advanced DAC/headphone amplifier in the world. It plays your favourite music with class-leading detail and clarity, right up to studio-grade levels.Dac And Headphone Amplifier In OneThe British designed, engineered and built Mojo 2 is the most advanced portable DAC and headphone amplifier in the world.Distinctly different from all other devices, Mojo 2 uses proprietary British digital audio technology perfected over more than two decades, coupled to a powerful ‘FPGA’ processor. The result is class-leading sound quality both on the move or at home, with the power to effortlessly drive any headphones. For music just as the artist intended, Mojo 2 brings you closer to the music than any other portable.Unique Fpga Technology For more than 20 years, Chord Electronics has exclusively used powerful programmable (FPGA) circuits with custom coding to provide the most advanced digital-to-analogue conversion performance in the world. With digital audio technologies perfected over two decades, Mojo 2 contains more digital audio know-how than any other small DAC, resulting in unrivalled sound quality, all backed by peerless technical measurements from the lab.Compatible With Poly For Streaming Completely compatible with our Wireless streaming module Poly, Poly allows for wireless integration to your system…Mojo 2 offers several ways to connect to digital devices, including smartphones, tablets and laptops, plus two 3.5 mm headphone outputs, meaning two can listen simultaneously. Digital inputs include fast-transfer USB-C, Micro-USB, optical and coaxial, with charging via a separate dedicated Micro-USB input.Mojo polychromatic light-up buttons offer simple control with an additional visual guide to the device’s settings. A new menu button offers navigation through a new range of features, including the all-important completely transparent UHD DSP function.

Φορητό DAC/ ενισχυτής ακουστικών με επαναφορτιζόμενη μπαταρία και Bluetooth DSD, DXD, PCM, MQA DAC 500mW Direct Drive ενισχυτής ακουστικών.

Super light. Super sound. The new GO blu, pocket-rocket portable HD DAC/amp, is diminutive enough to take with you wherever you go! It gives you best sound from wired but the convenience of wireless as you no longer need to have a cable connection to your smartphone. Whether you’re exercising at the gym with your Apple watch clocking your every step or catching up on your MacBook at your favourite coffee shop, the GO blu is the perfect companion. It pairs wirelessly with your source device via Bluetooth with no need to worry about whether you’ve got the right cable for your Android or Apple device. Just pair … and GO! Superior sound. Unbound. Wireless headphones or earphones of any kind integrate Bluetooth processing, D/A conversion and amplification onto one, standard ‘off the shelf’ chip. There is a ceiling to the sound quality that can be achieved. Team good corded headphones or in-ear monitors, with a separate, high-quality portable DAC/headphone amp, and your sound quality will beat any pair of wireless headphone or earphones hands down. Using the GO blu means no compromise on sound quality. Pair the GO blu to your Apple/Android. Connect your favourite corded headphones to the GO blu and then tuck it away –  it’s so petite it will slip into your running gear or suit pocket. It’s also gorgeous enough to show off by leaving it on the table at your favourite coffee shop! GO blu. Go beyond. With its lightweight, soft-touch polymer enclosure (great for Bluetooth reception, unlike signal-blocking metal), copper-coloured trim and ChronoDial watch crown-style control, the GO blu is a pleasure to use wherever you go. iFi has even incorporated a high-quality chip-based (CMOS-MEMS) microphone, enabling hands-free calls, voice chat for gaming and access to voice assistants such as Apple Siri and Google Assistant. Further flexibility is provided by the USB-C charging port, which doubles as an audio input enabling USB connection from source devices that don’t offer Bluetooth connectivity. Hi-res PCM audio data up to24-bit/96kHz is supported when the GO blu is connected in this way. HD Bluetooth 5.1 The way iFi implements Bluetooth is anything but ‘run of the mill’ and despite its diminutive size the GO blu is no exception. The use of Qualcomm’s latest four-core QCC5100 Bluetooth processing chip ensures that every current high-definition Bluetooth audio format is supported. aptX Adaptive and aptX HD LDAC and HWA/LHDC regular aptX and aptX Low Latency AAC SBC (plain vanilla Bluetooth) This means that every possible source device is handled at the highest audio resolution its Bluetooth specification allows – no other pocket-size DAC/amp delivers such comprehensive codec support, or such high-quality sound over Bluetooth. The GO blu is Bluetooth v5.1-compliant, ensuring the best possible range, stability and performance, and its ‘Bluetooth engine’ can be updated over the air. Three. Unique. Stages. Bluetooth. DAC. Amplifier. Most pocket-size Bluetooth DAC/headphone amps incorporate all-in-one ‘system on a chip’ solutions to deliver input processing, digital-to-analogue signal conversion and amplification. These are simple and cost-effective, but they cannot compare with expertly designed, individually optimised circuit stages when it comes to sound quality. Uniquely for a device of this type and size, the GO blu’s clever design packs in separate Bluetooth + DAC + Amp stages, each engineered in distinct blocks to deliver the ideal combination of cutting-edge specification and superb sound. Others just don’t this level of execution. The Bluetooth stage makes full use of Qualcomm’s latest four-core QCC5100 Bluetooth chip and supports every current high definition format. This then feeds the DAC stage with a Cirrus Logic 32-bit DAC chip at its heart. This is coupled with a customised digital filter to minimise pre-echoes and ringing artefacts, and a precision clock system to ensure ultra-low jitter, thus reducing errors and distortion in the digital audio signal. The amp circuitry benefits from symmetrical twin-mono signal paths and utilises iFi’s Direct Drive design concept – direct-coupled to ensure a clean signal path without distortion-inducing output coupling capacitors. The amp stage delivers up to 5.6V (twice the voltage of others) – considerably more power than other similarly sized devices – handling even relatively tough headphone loads with ease. To ensure signal strength suits the sensitivity of the connected headphones or earphones, auto-gain adjusts output up or down by 6dB.

Το iDSD Diablo, με τον κομψό νέο σχεδιασμό και το φλογερό κόκκινο φινίρισμα, βρίσκεται με υπερηφάνεια στην κορυφή της γκάμας φορητών / μεταφερόμενων DAC / amp. Είναι κατασκευασμένο για τους αληθινούς λάτρεις των ακουστικών που λαχταρούν την καθαρή, αγνή ηχητική απόδοση. Ακριβώς όπως ένα αγωνιστικό αυτοκίνητο που έχει σχεδιαστεί για ταχύτητα χωρίς συμβιβασμούς το iDSD Diablo αφαιρεί την ηχητική προσαρμογή καθώς και τη συνδεσιμότητα Bluetooth για εστίαση στην καθαρή ηχητική ισχύ. Προετοιμαστείτε για μια συναρπαστική βόλτα καθώς θα οδηγεί οποιοδήποτε ακουστικό στον πλανήτη εκπληκτικά. Με απλά λόγια, το iDSD Diablo είναι ο καλύτερος φορητός ενισχυτής που έχει σχεδιαστεί για να παρέχει ήχο επιπέδου αναφοράς.

COBALT'S PRECEDENT-SETTING PERFORMANCE IS MADE POSSIBLE BY MULTIPLE SIGNIFICANT UPGRADES: New, more advanced ESS ES9038Q2M DAC chip with a minimum-phase slow roll-off filter for more natural sound. Microchip's superb PIC32MX274 microprocessor draws less current and increases processing speed by 33%. Improved power-supply filtering that specifically increases immunity to WiFi, Bluetooth, and cellular noise. Includes a form-fitting DragonTail female USB-A to male USB-C Adaptor.All DragonTails use AQ's Carbon-level USB cable. AUDIOQUEST, GORDON RANKIN: A BEAUTIFUL PARTNERSHIP Like all previous DragonFly models, Cobalt uses Gordon Rankin's precedent-setting StreamLength® asynchronous-transfer USB code. Further, in Gordon's monoClock® technology, a single ultra-low-jitter clock generated from the ESS ES9038Q2M DAC chip runs the ESS chip functions as well as all microcontroller functions. This superior clock enables DragonFly Cobalt to provide greater resolution and clarity than DACs with multiple clocks. WHY THE "SLOW ROLL...?" Cobalt employs ESS's new flagship ES9038Q2M DAC chip. While the chips used in DragonFlys Black and Red are unbeatable for the price, the minimum-phase slow roll-off filter in the 9038 results in naturally expressive sound that is always emotionally engaging and never fatiguing—a beautiful combination of warmth and detail that we find equally exciting and soothing. KILLING THE NOISE In Cobalt, we've taken what we've learned from our recent research and development in noise dissipation to employ power-supply filtering specifically designed to dramatically reduce the increasingly prevalent noise from WiFi, Bluetooth, and cellular signals. Successfully combating this noise is absolutely crucial to the preservation of the lowest-level musical details, particularly when it comes to high-res audio—and especially when applied to a portable-audio device such as DragonFly. BIT-PERFECT VOLUME CONTROL AND 2.1-VOLT OUTPUT Cobalt features the same ESS Sabre 9601 headphone amp and bit-perfect volume control that give DragonFly Red its unique combination of power and grip over the music. This solution ensures maximum fidelity, thrilling dynamic contrast, and excellent signal-to-noise ratio. The 2.1-volt output makes Cobalt and Red compatible with a wide range of headphones, including power-hungry, low-efficiency models. FIRMWARE UPGRADEABLE DragonFlys Black, Red, and Cobalt are firmware upgradeable via our free Desktop Device Manager. In today's fast-paced digital world, longevity in a hi-fi component is increasingly rare—at any price. AudioQuest believes that today's digital devices should evolve as technology itself evolves, thereby delivering musical pleasure for many years to come. Our Desktop Device Manager will also allow you to identify your DragonFly's serial number and software version to ensure that the device is up to date. BEAUTIFUL SOUND IN A SMALLER PACKAGE... AND NOW WITH A TAIL All this goodness is packed into a sleek new case that measures just 2.26" x 0.73" x 0.47" (57.5mm x 18.6mm x 11.9mm), making the latest DragonFly 10% smaller and even a bit more pocket-friendly. Finally, to easily accommodate the increasing number of electronic devices that feature USB-C ports, DragonFly Cobalt comes with AudioQuest's USB-A to USB-C adaptor. THE REST OF THE DRAGONFLY FLEET: DRAGONFLYS BLACK AND RED While the original DragonFly created a new category of portable DAC, its USB power draw made it compatible with computers only. Black and Red answered the call of music lovers everywhere for DragonFlys that could be used with Apple iOS mobile devices and Android smartphones and tablets. These DACs proved for once and for all that convenience and performance need no longer be mutually exclusive. All current-production DragonFly models incorporate 32-bit ESS Sabre DAC chips. The DAC chips we’ve selected are remarkably powerful and sophisticated, yet we’ve intentionally limited DragonFly’s processing capabilities to 24-bit/96kHz resolution. This makes using DragonFly as simple as it’s always been: All models are fully compatible with PCs without having to download and install new drivers. Most importantly, DragonFly is designed to honor the music you already own and love. Whether you’re listening to Spotify, YouTube, Tidal, Qobuz, ripped CDs, or state-of-the-art high-resolution files, DragonFly will deliver a more emotionally compelling and enjoyable experience. STREAM TIDAL MASTERS EVERYWHERE DragonFlys Black, Red, and Cobalt support Tidal Masters (MQA) playback from iPhones and Android smartphones. MQA's technology folds high-resolution files into smaller files that can be streamed on the go. As MQA Renderers, DragonFlys Black, Red, and Cobalt complete the unfolding process, allowing music lovers to enjoy a wider selection of high-res music. STREAM QOBUZ’S VAST CATALOG OF OUTSTANDING HI-RES MUSIC DragonFlys Black, Red, and Cobalt support Qobuz high-res playback from iPhones, Android smartphones, and MacOS and Windows computers. Qobuz streams and downloads music in bit-perfect FLAC, the most widely used format for mastering and archiving, at resolutions of up to 24-bit/192kHz. With DragonFlys Black, Red, and Cobalt, listeners can enjoy more than 40 million tracks in lossless 16-bit CD resolution and over 2 million hi-res files. NATURALLY BEAUTIFUL SOUND IS RIGHT AT YOUR FINGERTIPS Whatever music turns you on, wherever you are, an AudioQuest DragonFly USB DAC delivers inspiring, dynamic, and beautiful sound to earbuds, headphones, powered speakers, or complete audio systems. With a DragonFly, music appreciation and exploration are limitless: Plug into an Apple or Windows® computer or connect to an iOS® or Android mobile device. Play YouTube or Vimeo videos. Go hunting on Bandcamp or SoundCloud. Explore playlists on Spotify or Pandora. Stream high-res audio from Tidal or Qobuz. No matter the choice of musical pleasure, DragonFly delivers beautiful sound, unraveling the emotional expression and nuance that makes music and movies so enjoyable. Now, more than ever before, naturally beautiful sound is right at your fingertips—however you want it, whenever you want it.

Το DragonFly συνδέεται στη θύρα USB ενός υπολογιστή για να παρακάμψει τα κυκλώματα ήχου του υπολογιστή και να προσφέρει πιο καθαρό,πιο φυσικό ήχο στα ακουστικά, τα ηχεία και τα πλήρη ηχητικά συστήματα. Μικρό, προσιτό, εύκολο στη χρήση και εξαιρετικά αποτελεσματικό. Για μεγαλύτερη συνολική απόδοση, τα νέα μοντέλα DragonFly ενσωματώνουν επίσης βελτιωμένες μάρκες ESS Sabre DAC 32-bit οι οποίες χρησιμοποιούν φιλτράρισμα ελάχιστης φάσης για φυσικό λεπτομερέστερο και πιο αυθεντικό ήχο.Tο DragonFly Red περιλαμβάνει τον τελευταίο ενισχυτή ακουστικών ESS και ένα κομψό ψηφιακό έλεγχο έντασης που βρίσκεται στο τσιπ DAC 9016 - μια εξελιγμένη εφαρμογή που εξασφαλίζει τη μέγιστη πιστότητα, τη δυναμική αντίθεση και τη σχέση σήματος προς θόρυβο.Το πιο σημαντικό, το DragonFly έχει σχεδιαστεί για να τιμήσει τη μουσική που ήδη κατέχετε και αγαπάτε. Είτε ακούτε το Spotify, το YouTube, το Tidal, τα τραγανισμένα CD ή τα υπερσύγχρονα αρχεία υψηλής ανάλυσης, το DragonFly θα σας προσφέρει μια πιο συναρπαστική και ευχάριστη εμπειρία.  

Το DragonFly Black είναι ένας ψηφιακός αναλογικός μετατροπέας USB (DAC) που έχει σχεδιαστεί για να παρέχει καθαρότερο,σαφέστερο, πιο φυσικό ήχο από οποιονδήποτε υπολογιστή, smartphone ή tablet.Ο μοναδικός σχεδιασμός του DragonFly Black επιτρέπει την αναπαραγωγή οποιουδήποτε τύπου αρχείου ανεξάρτητα από την ανάλυση. Το DragonFly Black είναι ικανό να αποκωδικοποιεί δεδομένα 24 bit / 96 kHz. (Για αρχεία με υψηλότερους ρυθμούς δειγματοληψίας, του υπολογιστή ή της κινητής συσκευή σας, σε συνδυασμό με την αναπαραγωγή τουλογισμικού, θα επαναλάβει τα δεδομένα σε συμβατή ανάλυση.Το DragonFly Black χρησιμοποιεί ένα μοναδικό σύστημα ρολογιών που ονομάζεται Hybrid-PLL.Το Υβριδικό-PLL εκτελεί ίσο ή καλύτερο από πολλά διακεκριμένα συστήματα ρολογιών.Το DragonFly Black έχει σχεδιαστεί για να είναι "plug and play" με όλα τα λειτουργικά συστήματα, όπως το Android, η Apple και η Microsoft.

Φορητός προενισχυτής (DAC) υψηλής ποιότητας 24bit/192kHz για ακουστικά. Σύνδεση USB με PC/Mac. Ενσωματωμένη τεχνολογία Constant Current Drive η οποία δίνει στα περισσότερα ακουστικά του εμπορίου ομοιόμορφο ηχητικό αποτέλεσμα με πλούσιο συχνοτικό εύρος, Quad Sum DAC τεχνολογία για χαμηλά επίπεδα θορύβου και εξάλειψη της παραμόρφωσης.Μέγιστη έξοδος 225mW στα 30 Ohm. Διαθέτει 2 knobs για την ρύθμιση της έντασης, 3 led για τις ενδείξεις της στάθμης και έξοδο ακουστικών. Ελαφρύ σώμα από αλουμίνιο. Κατασκευασμένο στις ΗΠΑ.

hiFace DAC 384/32 φορητός ασύγχρονος ψηφιοαναλογικός μετατροπέας. Υποστηρίζει ασύγχρονη σύνδεση με τον υπολογιστή και αναπαραγωγή έως 384kHz-32 bits και μπορεί να συνδεθεί απευθείας με ενισχυτή ή ευαίσθητα ακουστικά. Είσοδος: USB. Έξοδος: stereo jack. Output voltage: 2.0Vrms @10kOhms. THD+N: 112dB (@ 1kHz, A-weighted) Συμβατότητα Windows:Direct Sound, Kernel Streaming, WASAPI και ASIO. Συμβατότητα Mac: Integer mode και Direct mode. Συμβατότητα Linux.Χαρακτηριστικά:Connections: Input 1 x USB A type maleOutput 1 x 3.5mm stereo jack socket
I/OStandard: Input USB 2.0 Audio Format, Output stereo analogSampling Frequency 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4khZ, 192kHz, 352.8kHz, 384kHz
Resolution 16 up to 32 bitOutput voltage: 2.0Vrms @10kOhmsFrequency response: 5-22kHz (fs=44.1kHz) - 5-150kHz (fs=384kHz)THD+N: 112dB (@ 1kHz, A-weighted)Dimensions:8.8(d) x 1.4(h) x 2(w)
Power Supply:5V DC from USB bus
Temperature: 0°C to 70°C
Weight: 20gr approx.