Περιφερειακά
Padded Cover for ART 9 Series 15" models. It features heavy-duty weatherproof polyester outer fabric, foam rubber padding, and zip openings with Velcro fasteners. The frontal cover can be opened and blocked with velcro on one side. It features multiple openings for handles, for the rear connection panel, and the pole mount cap. Outer fabric: 600D polyester on PVC baseInternal fabric: 190 T taffeta fabric on PVC basePadding: 10 mm foam rubberClosure / opening: Zip + VelcroEmbroidered grey logo
The WTR06 is a 100 Volt line transformers for impedance matching between low impedance loudspeakers (8 Ohm) and 100 Volt amplifiers. Using the WTR06 line transformer, low impedance loudspeakers can be applied to any 100 Volt public address system where long cable runs can be used. The WTR06 has a maximum output power of 6 Watt and different power taps for 6 Watt, 3 Watt and 1.5 Watt. The housing is designed to be water- and dustproof, while making it possible to be hidden at any location such as above false ceilings, in wall junction boxes, in hollow places inside walls, ... The primary connection (100V side) is performed using a special designed waterproof AWX5 connector whereby the desired power tap can be selected depending on the rotation of the connector. The secondary connection (8 Ohm side) is performed using a waterproof cable gland. A connection cable with a length of 0.5 meter is provided on both sides of the transformer. The over-dimensioned core of the transformer limits the saturation to a minimum and gives a remarkable improvement of the sound reproduction, especially in the low frequency range. All these features make these transformers comply to an Ingress Protection rating of IP66.
The VC3xx2 Series are 100 Volt wall volume controllers whereby the volume for 100 V loudspeakers can be adjusted in 11 steps of 3 dB. They feature a slim and good looking design and are constructed out of sturdy ABS, making them suitable for big projects in industrial environments as well as standard home interiors. An integrated 24 Volt relay allows bypassing of the volume controller in priority situations, making sure the message is always clearly heard at maximum volume. Connections are made using screw terminal blocks, and flush and surface mount boxes (WB3102) are separately available.
All-in-One Wall ελεγκτής. Εκτός από τις βασικές λειτουργίες, όπως η επιλογή πηγής ήχου και έλεγχο έντασης ήχου, περιέχει επίσης πρόσθετες εισόδους σήματος.Τόσο η επιλογή εισόδου και ελέγχου έντασης μπορεί να γίνει χρησιμοποιώντας το ευέλικτο περιστρεφόμενο push-button. H ενσωματωμένη 2,5 "οθόνη γραφικών εξασφαλίζει τη λειτουργία αυτών και την καθιστά φιλική προς τον χρήστη.Οι δύο είσοδοι σήματος μπορούν να χρησιμοποιηθούν ως πρόσθετες τοπικές είσοδοι για το R2 & Μ2 και μπορεί να τοποθετηθεί σε οποιαδήποτε ζώνη εξόδου του. Αυτό σας επιτρέπει να συνδέσετε ένα CD ή MP3 player ως πηγή μουσικής για μια συγκεκριμένη ζώνη, ή να συνδέσετε ένα μικρόφωνο για ομιλίες, ανακοινώσεις και διάφορες άλλες εφαρμογές.Ο πίνακας έχει ένα βύσμα XLR εισόδου για μικρόφωνο, ενώ η είσοδος Line γίνεται μέσω της υποδοχής RCA.
The PSD241 is designed specifically for equipment with a low power consumption (1,67A at max 40W), such as the extremely efficient AMP20 amplifier. The PSD series offers a wide range of versatile switching power supplies. They are mainly used as power supply for extension units, interface boxes or other expansion units of sound systems, but they can be used for all kinds of applications requiring 24V DC, at different current ratings. There are two different construction forms available, standard ABS housings suited for standard applications, and industrial graded designed DIN rail mounting versions, to be used in all kinds of applications. Going from small and simple applications to industrial environments and hazardous locations.
The WP225 is a remote wall mixer that can be used in combination with various AUDAC hardware (ARES5A, MTX series, AMP523 and more). It converts the signal coming from a stereo line-level audio source (such as a tuner, mobile devices, ... ) or balanced microphone to the level corresponding to the differential signal input making it possible to transfer high-quality audio over long distances between the wall panel and the loudspeaker, by just using inexpensive twisted-pair CAT5e or better cabling. On the front side of the wall panel, there is a 3.5 mm jack stereo line input connection available together with a balanced XLR microphone input, both provided with their own knob which allows the signals to be mixed together.It also features a Bluetooth receiver and pair button with a handy LED indicator to check if its in pairing mode or already connected to a device. Bluetooth pair name can be customized as desired. The Bluetooth receiver works with iPhones, iPads, iOS & Android smartphones, tablets, PC, Laptops, Desktops, etc...The WP225 is available in 2 colours (White - RAL9003 & Black - RAL9005) and is compatible with most standard EU (80x80 mm) style in-wall boxes for solid and hollow walls. With the Elegant ABS front panel with glass, it will blend into any environment.
The DW3020 is a flush mount wall panel controller designed to work in combination with the R2 or M2 amplifier. It can be installed in a separate zone, and gives the possibility to select the desired audio source and adjust the volume for the zone that it’s applied to. The connection between the amplifier and the controller is made by using a standard 4-pin terminal block connector. The 45 x 45 mm size is compatible with AUDAC, Niko, Legrand and other standard 45 x 45 mm Mounting frames and cover plates.
The NMP40 SourceCon™ Network audio player module enables the possibility to stream audio files from a personal computer or mobile device directly to a professional audio system while maintaining the best available sound quality.Compatible with various streaming technologies like Spotify Connect and Soundtrack Your Brand© you can stream music straight to your professional sound system directly from the cloud while using only your computer or mobile device as a controller. This avoids any unwanted interruptions and maintains higher sample rates, so you can also set the right ambient in all types of public places (Always check with your local license regulations).
Protection cover for EVOX 12 Subwoofer + speaker.
Τσάντα μεταφοράς για τα ηχεία Mackie Thump215/Thump215XT/Thump15A/Thump15BST.
Τσάντα μεταφοράς για Thump212/Thump212XT/Thump12A/Thump12BST ηχεία.
Προστατέψτε το ηχείο αγαπημένο σου ηχείο Thump Go κατά τη μεταφορά του. Η τσάντα μεταφοράς Mackie Thump Go, είναι κατασκευασμένη από ανθεκτικό νάιλον για να εξασφαλίσει επιπλέον προστασία από τυχόν χτυπήματα
Θήκη προστασίας για ZLX112 & ZLX-12P
Your StudioLive 16 Series III Mixer deserves to stay shiny and new all the time. Treat it well with this stylish nylon dust cover.
Padded covers are available as optional accessories for all Linear 5 models.
Gig bag / backpack for StudioLive 16.0.2 With outside pocket
The distribution of mono and stereo balanced audio signals from a single source to multiple destinations has many applications including multi-zone sound reinforcement installations, live sports events coverage, broadcast studios, video suites, duplication or indeed anywhere high quality audio has to be distributed to a number of locations down long cable runs.The Drawmer DA-6 is a six channel stereo (or twelve channel mono) distribution amplifier featuring XLR balanced inputs and outputs with optional transformer balancing where remote amplifiers and recorders are fed from separate power supplies.The stereo Input features individual left/right level controls with LED bargraph metering enabling the correct balancing of stereo material or two mono signals. Each of the six outputs incorporate further left/right level controls and a Mono/Stereo switch providing the selection of either one stereo output or two mono outputs per channel. This feature allows the DA-6 to function as either a 1 x stereo input/6 x stereo outputs or 1 x mono input/12 x mono output unit or any combination of the two.The output section consists of a Channel Select so that the individual left/right output level of each channel is displayed on the output LED bargraph and can be monitored by the Headphone jack socket. A pair of auxiliary link stereo jack sockets (TRS) are provided via the rear panel for connection to further DA-6 units for the distribution of even more channels. Features:1x6 Stereo Distribution Amp with Monitoring.1 set of stereo (2) XLR inputs.6 sets of stereo (2) XLR outputs.Input stage has LED level meter.Each output channel can be switched to mono.Each output channel can be individually monitored.Built-in headphone amp.Optional transformer balanced outputs.Electronically balanced inputs with individual left/right level controls.LED metering on input for balancing stereo material or two mono signals.Left / Right level controls on each output with a stereo / mono switch.Headphone jack to monitor output of selected channel.LED metering on output of selected channel.Auxiliary pair of balanced 1/4" output jacks for linking multiple DA6 units.1 unit rack space.Inputs and Outputs are balanced XLRs at +4dBu.
Stage box- κονσόλαO τέλειος συνδυασμός για τις κονσόλες StudioLive Series III.Σχεδιασμένο για να λειτουργεί άψογα με κονσόλες και συσκευές εγγραφής της PreSonus® StudioLive® Series III, το PreSonus NSB 16.8 είναι ένα stage box 16 εισόδων, το οποίο ρυθμίζει γρήγορα και εύκολα τη μετάδοση σημάτων από το stage στο μίκτη μέσω ενός δικτύου AVB.Με τη δικτύωση AVB, όλα τα σήματα μεταφέρονται μέσω ενός καλωδίου CAT5e ή CAT6 Ethernet, εξαλείφοντας την ανάγκη για ένα βαρύ, ακριβό multi καλώδιο - με αποτέλεσμα την υποβάθμιση του σήματος που συμβαίνει με τα μακριά αναλογικά καλώδια. Μπορείτε ακόμη και να ελέγξετε από απόσταση τις εισόδους,τους προενισχυτές και το phantom power του NSB 16.8 από την κονσόλα Series III που είναι συνδεδεμένη στο δίκτυο ή από το δωρεάν λογισμικό ελέγχου μέσω tablet, PreSonus UC Surface.Το NSB 16.8 είναι εξοπλισμένο με δεκαέξι εισόδους combo (mic/line) που διαθέτουν τους διάσημους προενισχυτές XMAX class Α της Presonus, με τηλεχειρισμό. Όλες οι είσοδοι line μπορούν να ελέγχονται από μια κονσόλα StudioLive Series III και από το λογισμικό PreSonus UC Surface.Και οι οκτώ έξοδοι διαθέτουν υποδοχές XLR με lock. Αν αυτό δεν σας αρκεί, ένας ενσωματωμένος διακόπτης AVB 2 θυρών σάς επιτρέπει να συνδέσετε κι άλλες συσκευές, που σας προσφέρουν αρκετές συνδέσεις για ακόμα μεγαλύτερες εκπομπές και εγκαταστάσεις. Τι είναι το δίκτυο AVB;Το δίκτιο ήχου είναι πολλά περισσότερα από έναν απλό τρόπο σύνδεσης μέσω ψηφιακού καλωδίου. Με το δίκτυο AVB, μπορείτε να συνδέσετε ψηφιακές συσκευές ήχου σε μεγάλες αποστάσεις χρησιμοποιώντας καλώδιο CAT5e ή CAT6 Ethernet και να μεταφέρετε τον ήχο σας οπουδήποτε στο δίκτυο με εξαιρετικά χαμηλό θόρυβο. Το AVB προσφέρει πολλά πλεονεκτήματα που το καθιστούν την καλύτερη επιλογή ήχου από άλλα πρωτόκολλα δικτύωσης.Για παράδειγμα, το AVB παρέχει ένα ρολόι υψηλής ακρίβειας που μειώνει σημαντικά την αρμονική παραμόρφωση, εξασφαλίζοντας ότι ο ήχος παραμένει καθαρός.Όλα όσα χρειάζεστε ... και ακόμα παραπάνω. Χαρακτηριστικά : Ιδανική για κονσόλες μίξης StudioLive Series III 16 είσοδοι mic /line (υποδοχές combo) 16 Προενισχυτές μικροφώνου XMAX Class A τηλεχειρισμού Phantom power 48V με 8 LED κατάστασης 8 έξοδοι line (XLR) Πλήκτρο mute 2 θύρες Ethernet AVB με υποδοχές RJ45 Σύνδεση στην κονσόλα μέσω καλωδίου CAT5e ή CAT6 Cascadable μέσω AVB (αλυσίδα daisy) Μπορεί επίσης να λειτουργήσει μέσω λογισμικού ελέγχου "UC Surface" Ενσωματωμένη υποδοχή ρεύματος IEC Στιβαρό περίβλημα από χάλυβα
Stage box- κονσόλα O τέλειος συνδυασμός για τις κονσόλες StudioLive Series III. Σχεδιασμένο για να λειτουργεί άψογα με κονσόλες και συσκευές εγγραφής της PreSonus® StudioLive® Series III, το PreSonus NSB 8.8 είναι ένα stage box 8 εισόδων, το οποίο ρυθμίζει γρήγορα και εύκολα τη μετάδοση σημάτων από το stage στο μίκτη μέσω ενός δικτύου AVB. Με τη δικτύωση AVB, όλα τα σήματα μεταφέρονται μέσω ενός καλωδίου CAT5e ή CAT6 Ethernet, εξαλείφοντας την ανάγκη για ένα βαρύ, ακριβό multi καλώδιο - με αποτέλεσμα την υποβάθμιση του σήματος που συμβαίνει με τα μακριά αναλογικά καλώδια. Μπορείτε ακόμη και να ελέγξετε από απόσταση τις εισόδους,τους προενισχυτές και το phantom power του NSB 8.8 από την κονσόλα Series III που είναι συνδεδεμένη στο δίκτυο ή από το δωρεάν λογισμικό ελέγχου μέσω tablet, PreSonus UC Surface. Το NSB 8.8 είναι εξοπλισμένο με οκτώ εισόδους combo (mic/line) που διαθέτουν τους διάσημους προενισχυτές XMAX class Α της Presonus, με τηλεχειρισμό. Όλες οι είσοδοι line μπορούν να ελέγχονται από μια κονσόλα StudioLive Series III και από το λογισμικό PreSonus UC Surface.Και οι οκτώ έξοδοι διαθέτουν υποδοχές XLR με lock. Αν αυτό δεν σας αρκεί, ένας ενσωματωμένος διακόπτης AVB 2 θυρών σάς επιτρέπει να συνδέσετε κι άλλες συσκευές, που σας προσφέρουν αρκετές συνδέσεις για ακόμα μεγαλύτερες εκπομπές και εγκαταστάσεις. Τι είναι το δίκτυο AVB; Το δίκτιο ήχου είναι πολλά περισσότερα από έναν απλό τρόπο σύνδεσης μέσω ψηφιακού καλωδίου. Με το δίκτυο AVB, μπορείτε να συνδέσετε ψηφιακές συσκευές ήχου σε μεγάλες αποστάσεις χρησιμοποιώντας καλώδιο CAT5e ή CAT6 Ethernet και να μεταφέρετε τον ήχο σας οπουδήποτε στο δίκτυο με εξαιρετικά χαμηλό θόρυβο. Το AVB προσφέρει πολλά πλεονεκτήματα που το καθιστούν την καλύτερη επιλογή ήχου από άλλα πρωτόκολλα δικτύωσης. Για παράδειγμα, το AVB παρέχει ένα ρολόι υψηλής ακρίβειας που μειώνει σημαντικά την αρμονική παραμόρφωση, εξασφαλίζοντας ότι ο ήχος παραμένει καθαρός. Όλα όσα χρειάζεστε ... και ακόμα παραπάνω. Χαρακτηριστικά : Ιδανική για κονσόλες μίξης StudioLive Series III 8 είσοδοι mic /line (υποδοχές combo) 8 Προενισχυτές μικροφώνου XMAX Class A τηλεχειρισμού Phantom power 48V με 8 LED κατάστασης 8 έξοδοι line (XLR) Πλήκτρο mute 2 θύρες Ethernet AVB με υποδοχές RJ45 Σύνδεση στην κονσόλα μέσω καλωδίου CAT5e ή CAT6 Cascadable μέσω AVB (αλυσίδα daisy) Μπορεί επίσης να λειτουργήσει μέσω λογισμικού ελέγχου "UC Surface" Ενσωματωμένη υποδοχή ρεύματος IEC Στιβαρό περίβλημα από χάλυβα
Τσάντα μεταφοράς και προστασίας με Ρόδες για το Lucas Nano 600 System.
These two dual-purpose tabletop tripods/wall mounts let you set mid/high units on a horizontal surface and mount them on walls. Two speaker cords are included.Χαρακτηριστικά:lenght of cables: 2 mhorizontally adjustable: +/- 60°distance of the mounting holes: 74 mmweight of the package: 650 gr.adapter jack/speakon included
A three-piece, modern protective sleeve set in dark gray. Consists of a subwoofer sleeve with integrated roller board and two satellite sleeves – all three sleeves feature handy circumferential zip openings – for the safe and easy transport and storage of LUCAS 2K.
A three-piece, modern protective sleeve set in dark gray. Consists of a subwoofer sleeve with integrated roller board and two satellite sleeves – all three sleeves feature handy circumferential zip openings – for the safe and easy transport and storage of LUCAS 2K.
Ελεγκτής mount πάνελ τοίχου ο οποίος έχει σχεδιαστεί για να λειτουργεί σε συνδυασμό με τα Matrix MTX48 & 88. Μπορεί να εγκατασταθεί σε μια ξεχωριστή ζώνη, και δίνει τη δυνατότητα να επιλέξετε την επιθυμητή πηγή ήχου και να ρυθμίσετε την ένταση του ήχου για τη ζώνη που είναι να εφαρμοστεί.Η σύνδεση μεταξύ του Matrix και του ελεγκτή γίνεται με τη χρήση τυποποιημένων UTP CAT5 καλωδίων με βύσματα RJ45.SYSTEM SPECIFICATIONSControl RS-485Cabling CAT5 (up to 500 meter)Connectors 4-pin Euro Terminal BlockPower Consumption 0.35 W - 14 mA / 24 V PRODUCT FEATURESDimensions 45 x 45 x 33 mm (W x H x D)Weight 0.028 kgConstruction ABSFinish Soft-touch paintingMounting 45 x 45 mm (Audac / Niko / Legrand)Colours Black (RAL9005) (MWX45/B)White (RAL9010) (MWX45/W)
The MMP40 is a professional media player & recorder featuring SourceCon™ modular technology. This unique technology guarantees true plug & play implementation to any compatible device. When inserted to a supporting slot, the module is instantly installed, discovered and ready for operation without requiring any additional internal wiring or complex configuration.The MMP40 supports media playback from USB storage drives for a wide variation of compressed and lossless audio formats. Media playback for MP3, OGG, AAC, FLAC, WMA and WAV filetypes are possible, while recordings can be made in MP3, OGG and WAV filetypes. All media information such as track, artist, playback mode, ... including even graphical album covers can be retrieved from the MMP40, allowing displaying it on the controlling device or software interface. Both the balanced stereo line input (recording) are implemented on its panel, using two 3-pin terminal block connections.Χαρακτηριστικά:Media information retrievalMiniature modular designTruly plug & play solutionBalanced stereo audio in & outputWorks with any SourceCon™ enabled deviceAudio playback & recordingMP3, WMA, WAV, FLAC, OGG & AAC playbackMP3, WAV & OGG recordingsRepeat, random, single & continuous modes
The IMP40 is a professional internet radio player featuring SourceCon™ modular technology. This unique technology guarantees true plug & play implementation to any compatible device. When inserted to a supporting slot, the module is instantly installed, discovered and ready for operation without requiring any additional internal wiring or complex configuration.The IMP40 features the unique Linum™ technology which eliminates any unwanted behaviour such as sudden channel hopping or music stops. When the connection is interrupted, automatic switching to inserted media carriers (USB drives)avoids unpleasant silences in background music applications. The audio stream will be automatically and seamlessly restored afterwards. It synchronizes with the vTuner database which contains over 30.000 channels, allowing selection on different criteria such as genre, location, language, ... while custom streams can also be added to a preference list up to 100 entries. The input connection is implemented by an RJ45 type connector with indicator LED’s on its panel, allowing connection to any ethernet network. The balanced stereo line output is connected through two 3-pin terminal block connections. Χαρακτηριστικά:Linum™ TechnologyWorks with any SourceCon™ enabled deviceLinum™ TechnologyvTuner database sync (30.000+ Channels)Custom audio stream selectionMP3, WMA & AAC radio station supportUSB Media player backup (connection interruption)Preferential station storage (100 entries)Miniature modular designBalanced stereo audio output
Cat5e cable in 50 mt reel with Neutrik plugs.
Προστατευτικό κάλυμμα για PRX 815 από 600-D nylon υφασμα, προστατεύει από σκόνη, βρωμιά, γρατζουνιές. Με εσωτερικό επένδυση με αφρώδες προστατευτικό στρώμα και ανοίγματα στα σημεία των χειρολαβών του ηχείου, μαύρο χρώμα με το σήμα της JBL στην πρόσοψη.
Προστατευτικό κάλυμμα για EON 618S
Προστατευτικό κάλυμμα για EON 615
Θήκη προστασίας για ELX200-10.
Θήκη προστασίας για EKX115 & EKX115
Θήκη προστασίας για ELX200-12.
Θήκη προστασίας για ELX200-15.
Αναλόγιο μουσικής ανάγνωσης ύψους 940-1420mm. Διαστάσεις επικλινούς επιφάνειας (WxH) 475x345mm.
Adaptor για SmartPhones και Tablets. Δύο είσοδοι TRRS και μία έξοδος ακουστικών παρέχουν τη δυνατότητα σύνδεσης δύο μικροφώνων όπως τα Rode SmartLav.
Βάση κονσόλας P16-M η οποία προσαρμόζεται σε κάθε stand μικροφώνου, αναλογίου ή βάση κρουστών.
Σπαστό μεταλλικό αναλόγιο με ρυθμιζόμενο ύψος τριών σημείων και γωνία κλίσης. Συνοδεύεται από θήκη μεταφοράς. Χρώμα μαύρο.
Κουρδιστήρι ακριβείας για ακουστική κιθάρα σε μορφή clip στο σχήμα του headstock με δυνατότητα ρύθμισης γωνίας κλίσης. Ενδειξη led και λειτουργία auto power-off. Εύρος κουρδίσματος E2 (82.41Hz) E7 (2637.03Hz).
Κουρδιστήρι ακριβείας για ηλεκτρική κιθάρα σε μορφή clip στο σχήμα του headstock με δυνατότητα ρύθμισης γωνίας κλίσης. Ένδειξη led και λειτουργία auto power-off. Εύρος κουρδίσματος E2 (82.41Hz) ? E7 (2637.03Hz).
Θήκες προστασίας για ZLX15 & ZLX-15P BLACK
Μεταλλικό αναλόγιο με διάτρητη επιφάνεια.Χαρακτηριστικά:Χρώμα: μαύροWeight: 4,6 kg, MD: 500 x 340 mm, H: 700/1200 mm.
Μεταλλικό αναλόγιο ορχήστρας με δυνατότητα ρύθμισης καθ'ύψος (70 to 110cm) .
Adaptor για τοποθέτηση της κάψας d:Facto II σε ασύρματο σύστημα Sennheiser: (Sennheiser 2000/evolution wireless).
Adaptor για τοποθέτηση της κάψας d:Facto II σε ασύρματο σύστημα Shure: ( LX2, PGX2, SLX2, T2, U2, UC2, ULX2, UR2, UT2), Sony ( DWM-02, ZTX-M01), Lectrosonics (V1),