Πικάπ

Piano Black, Acrylic Platter, Ortofon 2M Red CartridgeOur first entry-level table utilizing the unique dual-plinth technology!Focus on ComponentsThe 3-speed belt driven table was developed for those seeking a perfectly matched set of features with an uncompromising focus on sound performance.The Complete PackageThe mmf-3.3 A comes complete with a tonearm and Ortofon 2M Red cartridge precision mounted.We are pleased to introduce our first entry-level table utilizing the unique dual-plinth technology originated by music hall. The mmf-3.3 embodies the culmination of over 30 years of research, development, and most important of all, listening. The 3-speed belt driven table was developed for those seeking a perfectly matched set of features with an uncompromising focus on sound performance. The 3.3 is constructed using high quality components and comes complete with a tonearm, cartridge mounted, and dust cover.Speed ControlThe 3.3 has a built-in electronic speed control for 33/45/and 78. The platter speed switches from 33 to 45 rpm at the touch of a button. 78 rpm requires the movement of the belt to a different location on the motor pulley, and the use of a different belt, included with the turntable.Carbon Fiber Arm with Bonded Alloy HeadshellThis tonearm is unique to music hall. Bonding the alloy headshell to the carbon arm-tube stiffens and dampens the carbon fiber tube. This construction significantly improves the sound and performance over similar looking one-piece carbon arms. The alloy headshell allows you to securely mount the cartridge to the tonearm without the twist and flex that is common in lesser one-piece carbon arms. Tonearms should not twist/flex as this negatively impacts the cartridge and tonearm’s ability to properly track the record groove. On many one-piece carbon tonearms, you can literally pinch the cartridge end of arm between your thumb and forefinger and twist/flex the arm-tube. Try this with the music hall and the tonearm remains rigid as your fingers begin to ache. The arm itself is housed in a 4-point gimbal bearing construction using Swiss ABEC bearings. This is superior to many of music hall’s competitors who use a lesser 2-point bearing system.Feature List:Piano Black, Acrylic Platter, Ortofon 2M Red CartridgeMusic Hall’s unique dual-plinth design – isolating the electronics and motor from the main bearing and tonearm33⅓, 45, or 78rpm speeds at the touch of a buttonElectronic speed controlled DC motor for superior speed stability, isolated on lower plinthCustom carbon fiber tonearm with alloy headshell for superb tracking abilityFlexible internal tonearm wire drawn from high purity copperCounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperHighly regarded Ortofon 2M Red cartridge with replaceable elliptical stylusThe cartridge supplied is properly aligned and mountedHigh precision stainless steel and bronze main bearing assembly for quiet fluid operationSpecial vibration damping adjustable feetHigh quality gold RCA connectors with detachable phono cableFull-size alloy platter and felt matQuick and easy to assembleDust cover and 45rpm adaptor included

We are celebrating our 50th Anniversary with a very special edition of the legendary Rega Planar 3. A turntable package designed and developed to maximise the performance from this model. As part of the celebration, we have put this anniversary package together at an incredible price that won't be repeatable, contact your dealer for details.Presented in the hugely popular new walnut effect finish, the 50th anniversary Planar 3 is supplied with a hand tuned Neo PSU MK2 and the handmade Rega Exact moving magnet cartridge factory fitted. The drive system uses our Reference EBLT drive belt and our 24V motor fitted with a custom CNC’d aluminium drive pulley to deliver the absolute best in performance and accuracy. The Anniversary Edition is badged with exclusive aluminium plinth and lid badges for the finishing touch.Celebrating 50 Years of Rega Research Ltd.From humble beginnings in 1973, making just a handful of turntables for friends, Rega has since grown into a multimillion-pound audio engineering company making world-class, award-winning hi-fi products that are supplied across the globe.Since inception, our expertise in mechanical and electrical engineering was combined with three core values; to create products that perform beyond expectation, deliver unrivalled value for money, and offer lifelong reliability. These same values are upheld today and are key factors in our continued growth and success. 

Audiophile vertical Plug & Play turntable with wall-mount option!A turntable set-up does not need to be as complicated as rocket-science. Our VT-E BT turntable proves that. This good sounding belt-driven deck offers 2 versions for left– and right-handed users. The fastest possible installation process is made possible, because it comes pre-adjusted out of the box. No further set-up is needed. Tracking force and anti-skating are carefully set for the included Ortofon OM 5E cartridge. The VT-E BT turntable can be positioned on a table or mounted on a wall.For further ease of use, it comes with a phono pre-amplifier and BT transmitter. So you can easily connect your VT-E BT via BT to any BT speakers or headphones! You can use both BT and RCA output at the same time. VT-E BT is available in black, red or white high gloss colour.

The Model 6 is a class leading integrated turntable delivering a unique sonic performance. Audio engineering excellence is achieved with technologically advanced new materials whilst maintaining the definitive craftsmanship that SME is famous for.Primary features include a CNC machined chassis made from a unique polymer high density resin material providing high mass, small footprint and superb resonance absorption. Main bearing, spindle and drive pulleys are precision made to the same exact standards as all SME high-end turntables. A new generation highly sophisticated electronic speed control unit provides fine pitch speed adjustment within a wide band range.The Model 6 is equipped with an improved version of the highly acclaimed SME M2-9 tonearm which is internally dampened with a unique single element balance system catering for cartridges weighing 5 to 12 grams and suitably designed for both MM and MC cartridges. The headshell is magnesium alloy for lightness and its ingenious design provides rigidity and allows azimuth correction.Design and engineering excellence built by audio enthusiasts for audio enthusiasts.

Synergy is a precision engineered integrated turntable with built-in phono stage, factory matched
moving coil cartridge and premium grade audio cables from world class partners, delivering the
ultimate vinyl replay experience without compromise. The MK2 Synergy is equipped with a new highly advanced drive system providing improved speed control, accuracy and stability. Synergy is a precision-made turntable equipped with the highly acclaimed SME Series IV tonearm, Ortofon’s ‘exclusive series’ MC Windfeld Ti cartridge, a custom designed phono stage by NAGRA and mono crystal silver wire by Crystal Cable. The collective sum of these components is award winning and class leading. Integrated and factory configured requiring minimal user set-up. Design is compact, sleek, modern and pure SME with precision engineered components, high attention to detail and crafted from the finest materials to the strictest tolerances. All of which contribute to an extraordinary vinyl listening experience.The MK2 Synergy is a precision turntable of high mass made to exacting engineering standards for high performance. The chassis and sub-chassis are CNC machined from premium grade aluminium billet. The sub-chassis is suspended on an advanced isolation system for primary resonance control and houses the main bearing, platter and tonearm. Four fully adjustable feet are mechanically de-coupled from the main chassis by isolators providing base resonance control. The main spindle is 19mm precision machined from high chrome tool steel, ground, super finished and supported in a sealed housing with individually fitted sintered bronze bearings of generous proportions needed for precise bearing and platter rotation. The platter is machined from aluminium alloy and weighs over 4.6kg. Extensionally dampened with the top surface iso-damp, diamond-turned with a fine scroll for acoustic performance. This method of finishing upsets a myriad of tiny fibres which interface with the underside of the vinyl record. A substantial record clamp operating on the reflex principle ensures the largest possible platter contact even when appreciable record warp is present. Synergy motor conforms to the highest standards of silent running and the turntable is driven by a custom made bi-phase AC synchronous motor controlled by a highly advanced speed control unit providing precise speed accuracy and stability.Speed ControlThe Speed Control Unit uses a dedicated DSP engine to generate two independent pure mathematical sine waves which provide total control of frequency, phase relationship and amplitude. These in turn are matched (tuned) to the motor for accuracy to obtain the best possible performance. The speed range is 33.33 and 45rpm with independent memory settings via a switched encoder. Fine pitch speed increments/decrements of +/-0.01% of the selected speed are made by a rotary control on the Speed Control Unit fascia. The SCU case is CNC machined from billet aluminium. A separate mains Power Unit keeps the transformer away from the SCU and importantly separated from the turntable audio signal cables.TonearmThe MK2 Synergy comes equipped with the SME Series IV magnesium tonearm, a precision instrument of extreme quality. Internal audio wiring is premium grade from Crystal Cable.Crystal Cable WiringSynergy is equipped with a premium grade signal cable from Crystal Cable. Pure mono-crystal silver conductors in miniature format. Providing precious metal in its most pure version, lifting the musical performance to a higher level.

The MK2 Model 30 is a unique precision turntable of uncompromising quality and engineering excellence.
Once independently judged as ‘the best turntable of all time.
Construction is heavy mass; dampening is extensional and non-vibration from moving parts ensures excellent
dynamics and pitch stability. A new sophisticated drive system provides a significant advancement in speed control
and accuracy, transforming the new generation Model 30 into a new league.The Model 30 is the former SME flagship turntable delivering an outstanding performance and for many years considered to be the world’s reference standard turntable. This accolade is achieved from an ingenious design, precision engineering, intelligent damping and fundamental physics. The net result of the immense care taken in the design and execution of these components is the Model 30, audio engineering excellence evolved over six decades.The Model 30 is effortless in controlling and managing vibration, resonance, mechanical energy and electrical fields. Weighing over 42kg it is significant in relation to its size and density. The main and sub-chassis’ resists flexing at low frequencies whilst high frequency resonance is attenuated by efficient extensional damping. The outstanding performance Model 30 is available with or without a tonearm. The tonearm option is the flagship SME Series V with contrasting Silver Printed Detail and Crystal Cable internal wiring. CONSTRUCTIONThe MK2 Model 30 is a precision turntable made to exacting engineering standards for extreme performance. The chassis and sub-chassis are CNC machined from premium grade aluminium billet and acoustically treated. The sub-chassis is stiffened with a lateral brace for improved chassis flex and vibration control. The suspended suspension system provides definitive resonance control and houses the main bearing, platter and tonearm. In addition, the sub-chassis motion is finely disciplined by fluid dampers within the four suspension columns. All four feet are fully adjustable and mechanically de-coupled from the main chassis by way of isolators.The main spindle is 19mm in diameter, precision machined from high chrome tool steel, ground, super finished and supported in a sealed housing with individually fitted sintered bronze bearings of generous proportions needed for precise bearing and platter rotational control.SUSPENSIONWith no sonic footprint, the Model 30 sub-chassis is suspended on 60 purpose made suspension rings meeting all the requirements of high-density construction, enabling an outstanding and dynamic performance.DUMPINGFour suspension column fluid-dampers disciplines sub-chassis movement and eliminates overshoot to give almost zero Q recovery. The isolation needed to prevent acoustic feedback is bridged by the resistive coupling of the damping fluid through which unwanted reacted energy is conducted away to ‘ground’. This function is adjustable through trimmers which can be used in conjunction with a gauge to give recommended settings or varied to suit individual conditions. This extreme level of control is instrumental in the design and performance of the Model 30.[v/c_column_text]PLATTERThe platter is machined from aluminium alloy and weighs 7.5kg and 330mm in diameter. Extensionally dampened and the top surface iso-damp mat is diamond-turned with a fine scroll for acoustic performance. This method of finishing upsets a myriad of tiny fibres which interface with the underside of the vinyl record. A substantial record clamp operating on the reflex principle ensures the largest possible platter contact even when appreciable record warp is present.MOTORThe Model 30 turntable is driven by a custom made bi-phase AC synchronous motor controlled by a highly advanced speed control unit providing precise speed accuracy and stability. The motor conforms to the highest standards of silent running.SPEED CONTROLThe Speed Control Unit uses a dedicated DSP engine to generate two independent pure mathematical sine waves which provide total control of frequency, phase relationship and amplitude. These in turn are matched (tuned) to the motor for accuracy to obtain the best possible performance. The speed range is 33.33 and 45 rpm with independent memory settings via a switched encoder. Fine pitch speed increments/decrements of +/-0.01% of the selected speed are made by a rotary control on the Speed Control Unit fascia. The SCU case is CNC machined from billet polymer resin with machined aluminium fascia, chassis base and rear panel.POWER UNITAn independent mains Power Unit keeps the transformer separated from the Speed Control Unit and importantly away from the audio signal cables.

The MK2 Model 30 is a unique precision turntable of uncompromising quality and engineering excellence.
Once independently judged as ‘the best turntable of all time.
Construction is heavy mass; dampening is extensional and non-vibration from moving parts ensures excellent
dynamics and pitch stability. A new sophisticated drive system provides a significant advancement in speed control
and accuracy, transforming the new generation Model 30 into a new league.The Model 30 is the former SME flagship turntable delivering an outstanding performance and for many years considered to be the world’s reference standard turntable. This accolade is achieved from an ingenious design, precision engineering, intelligent damping and fundamental physics. The net result of the immense care taken in the design and execution of these components is the Model 30, audio engineering excellence evolved over six decades.The Model 30 is effortless in controlling and managing vibration, resonance, mechanical energy and electrical fields. Weighing over 42kg it is significant in relation to its size and density. The main and sub-chassis’ resists flexing at low frequencies whilst high frequency resonance is attenuated by efficient extensional damping. The outstanding performance Model 30 is available with or without a tonearm. The tonearm option is the flagship SME Series V with contrasting Silver Printed Detail and Crystal Cable internal wiring. CONSTRUCTIONThe MK2 Model 30 is a precision turntable made to exacting engineering standards for extreme performance. The chassis and sub-chassis are CNC machined from premium grade aluminium billet and acoustically treated. The sub-chassis is stiffened with a lateral brace for improved chassis flex and vibration control. The suspended suspension system provides definitive resonance control and houses the main bearing, platter and tonearm. In addition, the sub-chassis motion is finely disciplined by fluid dampers within the four suspension columns. All four feet are fully adjustable and mechanically de-coupled from the main chassis by way of isolators.The main spindle is 19mm in diameter, precision machined from high chrome tool steel, ground, super finished and supported in a sealed housing with individually fitted sintered bronze bearings of generous proportions needed for precise bearing and platter rotational control.SUSPENSIONWith no sonic footprint, the Model 30 sub-chassis is suspended on 60 purpose made suspension rings meeting all the requirements of high-density construction, enabling an outstanding and dynamic performance.DUMPINGFour suspension column fluid-dampers disciplines sub-chassis movement and eliminates overshoot to give almost zero Q recovery. The isolation needed to prevent acoustic feedback is bridged by the resistive coupling of the damping fluid through which unwanted reacted energy is conducted away to ‘ground’. This function is adjustable through trimmers which can be used in conjunction with a gauge to give recommended settings or varied to suit individual conditions. This extreme level of control is instrumental in the design and performance of the Model 30.[v/c_column_text]PLATTERThe platter is machined from aluminium alloy and weighs 7.5kg and 330mm in diameter. Extensionally dampened and the top surface iso-damp mat is diamond-turned with a fine scroll for acoustic performance. This method of finishing upsets a myriad of tiny fibres which interface with the underside of the vinyl record. A substantial record clamp operating on the reflex principle ensures the largest possible platter contact even when appreciable record warp is present.MOTORThe Model 30 turntable is driven by a custom made bi-phase AC synchronous motor controlled by a highly advanced speed control unit providing precise speed accuracy and stability. The motor conforms to the highest standards of silent running.SPEED CONTROLThe Speed Control Unit uses a dedicated DSP engine to generate two independent pure mathematical sine waves which provide total control of frequency, phase relationship and amplitude. These in turn are matched (tuned) to the motor for accuracy to obtain the best possible performance. The speed range is 33.33 and 45 rpm with independent memory settings via a switched encoder. Fine pitch speed increments/decrements of +/-0.01% of the selected speed are made by a rotary control on the Speed Control Unit fascia. The SCU case is CNC machined from billet polymer resin with machined aluminium fascia, chassis base and rear panel.POWER UNITAn independent mains Power Unit keeps the transformer separated from the Speed Control Unit and importantly away from the audio signal cables.

The MK2 Model 20 is a finely engineered precision turntable. High density construction, extensional damping of major
surfaces and lack of vibration from moving parts ensures exceptional detail, resolution and uncoloured performance.
Equipped with a new highly advanced drive system provides a significant improvement to speed control, accuracy and
stability, making the new generation Model 20 far superior to the highly acclaimed original.The Model 20 has superb instrument quality machining allied with fundamental physics, the higher the mass and stiffness of the body the less it will flex and vibrate; the duration of a vibration is shortened by advanced damping treatment. The Model 20 effortlessly addresses the problems of extraneous vibrations which emanate from numerous sources including air and structural vibration from loudspeakers, groove modulation, stray electrical fields and mechanical energy from moving parts. Weighing 26kg is significant in relation to its size as density matters. The main and sub-chassis plate thicknesses are 16mm and resists flexing at low frequencies whilst high frequency resonance is attenuated by efficient extensional damping. The definitive performance Model 20 is available with or without a tonearm. The tonearm option is the flagship SME Series V with contrasting Silver Printed Detail and Crystal Cable internal wiring. CONSTRUCTIONThe MK2 Model 20 is a precision turntable made to exacting engineering standards for high performance. The chassis and sub-chassis are CNC machined from premium grade aluminium billet and acoustically treated. The sub-chassis suspended suspension system provides definitive resonance control and houses the main bearing, platter and tonearm. Four fully adjustable feet are mechanically de-coupled from the main chassis by way of isolators.The main spindle is 19mm in diameter, precision machined from high chrome tool steel, ground, super finished and supported in a sealed housing with individually fitted sintered bronze bearings of generous proportions needed for precise bearing and platter rotational control.SUSPENSIONWith no sonic footprint, the Model 20 sub-chassis is suspended on 40 purpose made suspension rings meeting all the requirements of high density construction, enabling a detailed resolution and uncoloured performance.DUMPINGA large central fluid-damper disciplines sub-chassis movement with a pleasing sense of security when handling records on the platter, offering a resistive ground-path for acoustic signals. In addition to a cartridge’s electrical output, mirror image acoustic signals reacted in the tonearm and record, will pass into the sub-chassis in the course of dissipation. However, the usual closed loop design does not address the problem of their differing phase, so in the Model 20 the structural interfaces concerned have received special attention to provide paths of the required impedance. This control of vibration is fundamental to the design of the Model 20 and goes a long way to explaining the stunning tonal and dynamic neutrality that it exhibits.PLATTERThe platter is machined from aluminium alloy and weighs 6.5kg. Extensionally dampened and the top surface iso-damp mat is diamond-turned with a fine scroll for acoustic performance. This method of finishing upsets a myriad of tiny fibres which interface with the underside of the vinyl record. A substantial record clamp operating on the reflex principle ensures the largest possible platter contact even when appreciable record warp is present.MOTORThe Model 20 turntable is driven by a custom made bi-phase AC synchronous motor controlled by a highly advanced speed control unit providing precise speed accuracy and stability. The motor conforms to the highest standards of silent running.SPEED CONTROLThe Speed Control Unit uses a dedicated DSP engine to generate two independent pure mathematical sine waves which provide total control of frequency, phase relationship and amplitude. These in turn are matched (tuned) to the motor for accuracy to obtain the best possible performance. The speed range is 33.33 and 45 rpm with independent memory settings via a switched encoder. Fine pitch speed increments/decrements of +/-0.01% of the selected speed are made by a rotary control on the Speed Control Unit fascia. The SCU case is CNC machined from billet polymer resin with machined aluminium fascia, chassis base and rear panel.POWER UNITAn independent mains Power Unit keeps the transformer separated from the Speed Control Unit and importantly away from the audio signal cables.

The MK2 Model 15 takes its inspiration from the Model 20 with its high-density construction but with a compact footprint. In seeking to emulate the engineering excellence of its bigger brother, the Model 15 is a precision turntable
delivering a dynamic audio performance. The new highly advanced drive system provides significantly improved speed
control, accuracy and stability, the Model 15 just got better.Designed with simplicity of operation that has come to be expected from all SME turntables, the Model 15 is engineered and precision made from the finest materials and to the strictest tolerances contributing to an outstanding musical performance. It’s clever styling makes it a credible addition to any sound system which will astound and amaze listeners for many years.The high-performance Model 15 is available with three SME tonearm options of Series 309, Series IV, Series V, or without a tonearm (turntable only). All tonearm options come complete with internal Crystal Cable wiring as standard.CONSTRUCTIONThe MK2 Model 15 is a precision turntable made to exacting engineering standards for high performance. The chassis and sub-chassis are CNC machined from premium grade aluminium billet. The sub-chassis suspended suspension system provides definitive resonance control and houses the main bearing, platter and tonearm. Three fully adjustable feet are mechanically de-coupled from the main chassis by isolators providing base resonance control. The main spindle is 19mm (3/4″) precision machined from high chrome tool steel, ground, super finished and supported in a sealed housing with individually fitted sintered bronze bearings of generous proportions needed for precise bearing and platter rotation.SUSPENSIONThe Model 15 sub-chassis is suspended on 30 purpose made suspension rings and weighs together with the platter more than 11kg (24lb), thus meeting all the requirements of high-density construction required to enable a dynamic sound free from colouration.DUMPINGSub-chassis motion is controlled by a central fluid damper which offers a resistive ground path for acoustic signals, eliminates overshoot and gives almost zero ‘Q’ recovery.PLATTERThe platter is machined from aluminium alloy and weighs over 4.6kg (10lb). The platter is extensionally dampened and the top surface iso-damp is diamond-turned with a fine scroll for acoustic performance. This method of finishing upsets a myriad of tiny fibres which Interface with the underside of the vinyl record. A substantial record clamp operating on the reflex principle ensures the largest possible platter contact even when appreciable record warp is present.MOTORThe Model 15 turntable is driven by a custom made bi-phase AC synchronous motor controlled by a highly advanced speed control unit providing precise speed accuracy and stability. The motor conforms to the highest standards of silent running.SPEED CONTROLThe Speed Control Unit uses a dedicated DSP engine to generate two independent pure mathematical sine waves which provide total control of frequency, phase relationship and amplitude. These in turn are matched (tuned) to the motor for accuracy to obtain the best possible performance. The speed range is 33.33 and 45 rpm with independent memory settings via a switched encoder. Fine pitch speed increments/decrements of +/-0.01% of the selected speed are made by a rotary control on the Speed Control Unit fascia. The SCU case is CNC machined from billet polymer resin.POWER UNITA remotely separate mains Power Unit keeps the transformer well away from the Speed Control Unit and importantly away from the audio signal cables.

ΠεριγραφήΠλατό χωρίς βραχίονα υψηλής ακριβείας κατασκευασμένο ειδικά για τοποθέτηση βραχιόνων ενεργού μήκους 9’’, Λειτουργία σε 33 1/3, 45 RPM. Συμπαγής κατασκευή διπλού σασί από ενιαίο μεταλλικό κράμα, Υπο-σασί με έδραση σε τρία ρυθμιζόμενα σημεία αναρτημένα από ελατήρια που εδράζονται σε ειδικούς πυργίσκους απόσβεσης, τύπου λειτουργίας εκκρεμούς. Ειδικά κατεργασμένος άξονας περιστροφής, χρωμονικελιούχος, θερμικά σκληρυμένος, υψηλής λείανσης και ανοχής σε λιπαινόμενο ανεστραμμένο πηγάδι, υψηλής ακριβείας. Το πλατό είναι από κατεργασμένο κράμα υψηλής συμπίεσης ακρυλικού και βινυλίου και επικαλυμμένο μέσω ειδικής κατεργασίας από υλικό αντικραδασμικής απόσβεσης πάχους 60 mm μεγάλης αδρανείας, Εξωτερικό μοτέρ DC υψηλής τεχνολογίας με ξεχωριστό τροφοδοτικό και ενσωματωμένο ειδικό σύστημα ελέγχου NC με βάση το πρωτοποριακό κύκλωμα Never-Connected.

ΠεριγραφήΠλατό χωρίς βραχίονα υψηλής ακριβείας κατασκευασμένο ειδικά για τοποθέτηση βραχιόνων ενεργού μήκους 9’’, Λειτουργία σε 33 1/3, 45 RPM. Συμπαγής κατασκευή διπλού σασί από ενιαίο μεταλλικό κράμα, Υπο-σασί με έδραση σε τρία ρυθμιζόμενα σημεία αναρτημένα από ελατήρια που εδράζονται σε ειδικούς πυργίσκους απόσβεσης, τύπου λειτουργίας εκκρεμούς. Ειδικά κατεργασμένος άξονας περιστροφής, χρωμονικελιούχος, θερμικά σκληρυμένος, υψηλής λείανσης και ανοχής σε λιπαινόμενο ανεστραμμένο πηγάδι, υψηλής ακριβείας. Το πλατό είναι από κατεργασμένο κράμα υψηλής συμπίεσης ακρυλικού και βινυλίου και επικαλυμμένο μέσω ειδικής κατεργασίας από υλικό αντικραδασμικής απόσβεσης πάχους 60 mm μεγάλης αδρανείας, Εξωτερικό μοτέρ DC υψηλής τεχνολογίας με ξεχωριστό τροφοδοτικό και ενσωματωμένο ειδικό σύστημα ελέγχου NC με βάση το πρωτοποριακό κύκλωμα Never-Connected.

ΠεριγραφήΠλατό χωρίς βραχίονα υψηλής ακριβείας κατασκευασμένο ειδικά για τοποθέτηση βραχιόνων ενεργού μήκους 9’’, Λειτουργία σε 33 1/3, 45 RPM. Συμπαγής κατασκευή σασί από ενιαίο ακρυλικό κράμα, Υπο-σασί με έδραση σε τρία ρυθμιζόμενα σημεία αναρτημένα από ελατήρια που εδράζονται σε ειδικούς πυργίσκους απόσβεσης. Ειδικά κατεργασμένος άξονας περιστροφής, χρωμονικελιούχος, θερμικά σκληρυμένος, υψηλής λείανσης και ανοχής σε λιπαινόμενο ανεστραμμένο πηγάδι, υψηλής ακριβείας. Το πλατό είναι από κατεργασμένο κράμα υψηλής συμπίεσης ακρυλικού και βινυλίου και επικαλυμμένο μέσω ειδικής κατεργασίας από υλικό αντικραδασμικής απόσβεσης με επίχρυσα αντίβαρα ισορροπίας κίνησης και αδράνειας, εξωτερικό μοτέρ DC υψηλής τεχνολογίας. 

ΠεριγραφήΠλατό χωρίς βραχίονα υψηλής ακριβείας κατασκευασμένο ειδικά για τοποθέτηση βραχιόνων ενεργού μήκους 9’’, Λειτουργία σε 33 1/3, 45 RPM. Συμπαγής κατασκευή σασί από ενιαίο ακρυλικό κράμα, Υπο-σασί με έδραση σε τρία ρυθμιζόμενα σημεία αναρτημένα από ελατήρια που εδράζονται σε ειδικούς πυργίσκους απόσβεσης. Ειδικά κατεργασμένος άξονας περιστροφής, χρωμονικελιούχος, θερμικά σκληρυμένος, υψηλής λείανσης και ανοχής σε λιπαινόμενο ανεστραμμένο πηγάδι, υψηλής ακριβείας. Το πλατό είναι από κατεργασμένο κράμα υψηλής συμπίεσης ακρυλικού και βινυλίου και επικαλυμμένο μέσω ειδικής κατεργασίας από υλικό αντικραδασμικής απόσβεσης με επίχρυσα αντίβαρα ισορροπίας κίνησης και αδράνειας, εξωτερικό μοτέρ DC υψηλής τεχνολογίας. 

Περιγραφή Πλατό χωρίς βραχίονα υψηλής ακριβείας κατασκευασμένο ειδικά για τοποθέτηση βραχιόνων ενεργού μήκους 9’’, Λειτουργία σε 33 1/3, 45 RPM. Συμπαγής κατασκευή σασί από μεταλλικό κράμα. Έδραση σε τρία ρυθμιζόμενα σημεία με αναρτώμενα ελατήρια. Ειδικά κατεργασμένος άξονας περιστροφής, χρωμονικελιούχος, θερμικά σκληρυμένος, υψηλής λείανσης και ανοχής σε λιπαινόμενο ανεστραμμένο πηγάδι, υψηλής ακριβείας. Το πλατό είναι από κατεργασμένο κράμα υψηλής συμπίεσης ακρυλικού και βινυλίου και επικαλυμμένο μέσω ειδικής κατεργασίας από υλικό αντικραδασμικής απόσβεσης με αντίβαρα για την διατήρηση της ομαλής περιστροφής και της αδρανείας, Εξωτερικό μοτέρ DC υψηλής τεχνολογίας.

Περιγραφή Πλατό χωρίς βραχίονα υψηλής ακριβείας κατασκευασμένο ειδικά για τοποθέτηση βραχιόνων ενεργού μήκους 9’’, Λειτουργία σε 33 1/3, 45 RPM. Συμπαγής κατασκευή σασί από μεταλλικό κράμα. Έδραση σε τρία ρυθμιζόμενα σημεία με αναρτώμενα ελατήρια. Ειδικά κατεργασμένος άξονας περιστροφής, χρωμονικελιούχος, θερμικά σκληρυμένος, υψηλής λείανσης και ανοχής σε λιπαινόμενο ανεστραμμένο πηγάδι, υψηλής ακριβείας. Το πλατό είναι από κατεργασμένο κράμα υψηλής συμπίεσης ακρυλικού και βινυλίου και επικαλυμμένο μέσω ειδικής κατεργασίας από υλικό αντικραδασμικής απόσβεσης με αντίβαρα για την διατήρηση της ομαλής περιστροφής και της αδρανείας, Εξωτερικό μοτέρ DC υψηλής τεχνολογίας.

ΠεριγραφήTo νέο επαγγελματικό πικάπ AT-LP140XP της Audio-Technica έχει σχεδιαστεί για να παρέχει εξαιρετική ποιότητα ήχου και αξιοπιστία. To μοτέρ υψηλής ροπής εξασφαλίζει γρήγορη εκκίνηση και καταπληκτική σταθερότητα ταχύτητας για αναπαραγωγή 33-1/3, 45 αλλά και 78 στροφών το λεπτό. Είναι εξοπλισμένο με βραχίονα σχήματος S με ρύθμιση ύψους (κατακόρυφη ανίχνευση), ρύθμιση αντιολίσθησης και παρέχεται με νέα κεφαλή DJ υψηλής απόδοσης AT-XP3. Το πλατό αλουμινίου με χυτοπρεσαριστό υλικό και το υβριδικό χαλύβδινο / πολυμερές deck αντι-συντονισμού συμβάλλουν περαιτέρω στη απόδοση του πικάπ. Διαθέσιμο σε ασημί και μαύρο χρώμα, το AT-LP140XP προσφέρει ότι χρειάζεται ένας Dj, όπως μπουτόν έναρξης-διακοπής, αναπαραγωγή εμπρός-πίσω, επιλογή αλλαγής βήματος, με φως παρακολούθησης της βελόνας και πολλά άλλα.

ΠεριγραφήTo νέο επαγγελματικό πικάπ AT-LP140XP της Audio-Technica έχει σχεδιαστεί για να παρέχει εξαιρετική ποιότητα ήχου και αξιοπιστία. To μοτέρ υψηλής ροπής εξασφαλίζει γρήγορη εκκίνηση και καταπληκτική σταθερότητα ταχύτητας για αναπαραγωγή 33-1/3, 45 αλλά και 78 στροφών το λεπτό. Είναι εξοπλισμένο με βραχίονα σχήματος S με ρύθμιση ύψους (κατακόρυφη ανίχνευση), ρύθμιση αντιολίσθησης και παρέχεται με νέα κεφαλή DJ υψηλής απόδοσης AT-XP3. Το πλατό αλουμινίου με χυτοπρεσαριστό υλικό και το υβριδικό χαλύβδινο / πολυμερές deck αντι-συντονισμού συμβάλλουν περαιτέρω στη απόδοση του πικάπ. Διαθέσιμο σε ασημί και μαύρο χρώμα, το AT-LP140XP προσφέρει ότι χρειάζεται ένας Dj, όπως μπουτόν έναρξης-διακοπής, αναπαραγωγή εμπρός-πίσω, επιλογή αλλαγής βήματος, με φως παρακολούθησης της βελόνας και πολλά άλλα.

ΠεριγραφήΑυτό το πλήρως χειροκίνητο πικάπ έχει σχεδιαστεί σύμφωνα με το AT-LP120XUSB, αλλά προσθέτει την άνεση της ασύρματης συνδεσιμότητας Bluetooth στις υπάρχουσες αναλογικές και USB εξόδους.Crystal Clear Bluetooth Wireless AudioΣυμβατό με τα περισσότερα ηχεία και ακουστικά Bluetooth, το LP120XBT-USB συνδέεται άψογα με τις συσκευές σας. Απλώς πατήστε το κουμπί Bluetooth, που βρίσκεται δίπλα στον τονικό βραχίονα, για 4 δευτερόλεπτα και συνδεθείτε στα ηχεία που έχετε επιλέξει, είναι τόσο απλό. Μπορείτε επίσης να συνδεθείτε με ασύρματα ακουστικά Bluetooth, δίνοντας σας την ευελιξία να απολαμβάνετε τους δίσκους βινυλίου σας χωρίς την ακαταστασία των καλωδίων ή να χρειάζεται να βρίσκεστε κοντά στο πικάπ και τη μουσική ρύθμιση. Βυθιστείτε στην πιο άνετη καρέκλα σας και απολαύστε ασύρματα πάνω από μισό αιώνα ιαπωνικής μηχανικής ήχου και υπεροχής ήχου.Plug and PlayΤο LP120XBT-USB έχει σχεδιαστεί για να σας προσφέρει μια εμπειρία ακρόασης υψηλής ποιότητας που είναι εύκολο να απολαύσετε αμέσως. Ένας ενσωματωμένος προενισχυτής σημαίνει ότι το LP120XBT-USB μπορεί να συνδεθεί απευθείας στα υπάρχοντα ηχεία σας ή, με το απλό πάτημα ενός διακόπτη, να συνδεθεί ασύρματα μέσω Bluetooth 5.0 σε οποιοδήποτε ηχείο συμβατό με bluetooth, υποστηριζόμενο βοηθό σπιτιού ή ασύρματα ακουστικά. Εξοικονόμηση χώρου χωρίς εξωτερικούς ενισχυτές, χωρίς ακαταστασία και χωρίς χάος. απλά απίστευτος ήχος και αξιόπιστα χαρακτηριστικά σχεδιασμένα με πάνω από μισό αιώνα ιαπωνικής καινοτομίας ήχου.

The Model 60 is the most technically advanced SME turntable ever made, evolved from 75 years of engineering
excellence, innovation and perfection, delivering precise and pure audio reproduction. Extremely high build quality, close tolerance precision engineered componentry, striking design and a range of none painted uniquely engineered finishes.Introduced 60 years after SME entered the elite high end audio world, the Model 60 is far superior than the highly credible Model 30 which has been the reference precision turntable for over 3 decades. The new flagship is an entirely new turntable design with clever engineering and technological advancement. Design features include: de-coupled adjustable feet with multipoint isolation, an intelligent suspended suspension system with horizontal and vertical control, hydraulically dampened main bearing, acoustically treated main chassis, sub-chassis and platter, sophisticated new generation drive system with highly accurate speed control, AC motor and independent power transformer. The Model 60 is equipped with the new Series VA tonearm which is an advanced version of the famous Series V tonearm which has been extensively sonically improved by use of a non-metallic tonearm CNC machined from an advanced polymer resin material with high density and high rigidity properties. The Series VA tonearm tube is acoustically inert with a significantly reduced resonance signature, optimised effective mass and a wide cartridge balance weight rangeTest ResultsTurntable Speed Error at 33.33rpm: 33.33rpm (-0.005%)
Time to Audible Stabilisation: 5 – 6 seconds
Peak Wow/Flutter (Peak wtd): 0.01% / 0.02%
Rumble (silent groove, DIN B wtd): -75dB (-75.4 dB with Clamp)
Rumble (through bearing, DIN B wtd): -76.5dB
Hum & Noise (unwtd, rel to 5cm/sec): -62.5dB
Power Consumption: 18w (1w standby)Drive System & Speed RangeThe turntable is driven by a custom made bi-phase AC synchronous motor. The speed control unit uses a dedicated DSP engine to generate two independent pure mathematical sine waves which provide total control of frequency, phase relationship and amplitude. These in turn are matched (tuned) to the motor for accuracy to obtain the best possible performance. The output driver stage is a 2 channel, class AB Bi-polar design with low distortion and relay coupled directly to the motor. The entire design is implemented using high quality surface mount technology on a gold plated FR4 PCB. The speed range is 33.33 and 45rpm with independent memory settings via a switched encoder.

The Model 6 is a class leading integrated turntable delivering a unique sonic performance. Audio engineering excellence is achieved with technologically advanced new materials whilst maintaining the definitive craftsmanship that SME is famous for.Primary features include a CNC machined chassis made from a unique polymer high density resin material providing high mass, small footprint and superb resonance absorption. Main bearing, spindle and drive pulleys are precision made to the same exact standards as all SME high-end turntables. A new generation highly sophisticated electronic speed control unit provides fine pitch speed adjustment within a wide band range.The Model 6 is equipped with an improved version of the highly acclaimed SME M2-9 tonearm which is internally dampened with a unique single element balance system catering for cartridges weighing 5 to 12 grams and suitably designed for both MM and MC cartridges. The headshell is magnesium alloy for lightness and its ingenious design provides rigidity and allows azimuth correction.Design and engineering excellence built by audio enthusiasts for audio enthusiasts.

The MK2 Model 12 mkII is designed and precision engineered for pure audio reproduction. The all new highly advanced drive system provides much improved speed control, accuracy and stability. This best-selling and very capable precision turntable has evolved to deliver the perfect listening experience.The Model 12A has been designed for those who would prefer to select their own unique combination of phono stage and cartridge for a more personalised listening experience. This introductory model benefits from the finest materials and craftsmanship found throughout the entire SME turntable and tonearm range. Every component part has been precision engineered in-house to the strictest tolerances to contribute to an outstanding musical performance This exciting entry level turntable uses the unique styling of Synergy and comes complete with the highly acclaimed SME 309 tonearm and internal Crystal Cable wiring as standard. The Model 12A is available in three paint finishes of traditional SME Black, Dark Grey and Dark Blue with contrasting detailing.Speed ControlThe electronic control unit uses a high-performance microprocessor, optimised for motor control. Closed loop speed control is implemented using a proportional plus integral (PI) algorithm. Speed ranges are 33.3, 45 & 78 rpm, with fine pitch speed adjustment allowing increments/decrements of +/-0.01% of the selected speed. The electronic control circuitry and power supply unit are housed in an external one-piece CNC machined case. This new design offers complete isolation and support and is the perfect environment for the electronics. Speed selection controls are mounted on the front facia panel with LED indicators.TonearmDesigned to compliment the Model 309 tonearmCrystal Cable WiringThe Model 12A is equipped with a premium grade signal cable from Crystal Cable which is installed inside the tonearm, connected to phono stage and coupled with the cartridge. Pure mono-crystal silver conductors in miniature format. Providing precious metal in its most pure version, lifting the musical performance to a higher level.

The Model 6 Classic is a class leading integrated turntable delivering unique sonic performance, engineering excellence and definitive SME craftsmanship. Primary features include a CNC machined chassis made from a unique polymer high density resin material providing high mass, small footprint and superb resonance absorption. Main bearing, spindle and drive pulleys are precision made to the same exact standards as all SME high-end turntables. A new generation highly sophisticated electronic speed control unit provides fine pitch speed adjustment within a wide band range. Machined aluminium finishers fitted to the isolation feet complete the look of the Classic.The Model 6 Classic is complimented with the M2-9R tonearm with extensive features including thumbwheel vertical tracking adjustment, tungsten balance weights, double draw-pin detachable headshell with azimuth adjustment. The tungsten alloy balance weight allows for a maximum centre of gravity shift to balance a greater range of cartridges up to 38 grams and with a direct plug-in head up to 46 grams.Design and engineering excellence built by audio enthusiasts for audio enthusiasts.

mmf Mark1 Turntable Sophisticated Sound at an Entry-Level PriceAlthough the Music Hall Mark1 occupies a lower price point than our famous mmf 2.3, the engineering is substantially the same. Roy Hall’s signature sound can be heard in the entire Music Hall range, and the Mark1 is no exception!All-New TonearmOur new all-aluminum, S-shaped design, with a precision aluminum headshell, allows us to achieve the highest possible level of rigidity and internal damping. The tonearm flange is CNC-machined, which allows for accurate mounting of the tonearm to the heavy chassis. VTA is fully adjustable, and it’s a feature almost never seen in this price-range.This no-compromises solution enables us to achieve that signature Music Hall sound. The magnetic anti-skating feature is quite a luxurious one. And the factory-set pre-adjusted and fixed counterweight makes setup a breeze.CartridgeWe have taken care to mount a cartridge that perfectly matches the characteristics of the tonearm. The Mark1 uses a high quality, super fast and dynamic low mass cartridge from one of the leading cartridge manufacturers in Europe, the Ortofon OM 5E. This creates a beautiful, full-bodied sound, which until now has been impossible to achieve in a budget turntable.Feature List:extremely quiet belt drive, 2-speed turntablealuminum die-cast platter33 1⁄3 and 45rpmbuilt-in phono amp or direct line outstatic balanced S-shaped tonearm w/detachable headshellAudio Technica AT3600L moving-magnet cartridge suppliedanti-skating control for increased stereo balance+/- 10% adjustable pitch controldust cover includeddesigned and developed in the US and Francew17.7 x d13.8 x h5.7in12lbs (package)low noise, belt-drive designhigh-gloss piano lacquer finish or walnut veneerhigh quality 8.6” S-shape aluminium tonearmprecision aluminium headshell and VTA adjustmentdynamically balanced and damped counterweightmagnetic anti-skatingAC synchronous motor for superior speed stabilityhigh quality Ortofon OM 5E cartridge properly aligned and mountedprecision stainless steel main bearing sheathed in Tef-lon® for noise-free fluid operationdynamically balanced alloy platter with soft felt mathigh quality gold RCA connectorsspecial vibration-damping adjustable feetdust cover and 45rpm adaptor included

mmf Mark1 Turntable with phono preamp and Bluetooth.Sophisticated Sound at an Entry-Level PriceAlthough the Music Hall Mark1 occupies a lower price point than our famous mmf 2.3, the engineering is substantially the same. Roy Hall’s signature sound can be heard in the entire Music Hall range, and the Mark1 is no exception!All-New TonearmOur new all-aluminum, S-shaped design, with a precision aluminum headshell, allows us to achieve the highest possible level of rigidity and internal damping. The tonearm flange is CNC-machined, which allows for accurate mounting of the tonearm to the heavy chassis. VTA is fully adjustable, and it’s a feature almost never seen in this price-range.This no-compromises solution enables us to achieve that signature Music Hall sound. The magnetic anti-skating feature is quite a luxurious one. And the factory-set pre-adjusted and fixed counterweight makes setup a breeze.CartridgeWe have taken care to mount a cartridge that perfectly matches the characteristics of the tonearm. The Mark1 uses a high quality, super fast and dynamic low mass cartridge from one of the leading cartridge manufacturers in Europe, the Ortofon OM 5E. This creates a beautiful, full-bodied sound, which until now has been impossible to achieve in a budget turntable.Feature List:extremely quiet belt drive, 2-speed turntablealuminum die-cast platter33 1⁄3 and 45rpmbuilt-in phono amp or direct line outstatic balanced S-shaped tonearm w/detachable headshellAudio Technica AT3600L moving-magnet cartridge suppliedanti-skating control for increased stereo balance+/- 10% adjustable pitch controldust cover includeddesigned and developed in the US and Francew17.7 x d13.8 x h5.7in12lbs (package)low noise, belt-drive designhigh-gloss piano lacquer finish or walnut veneerhigh quality 8.6” S-shape aluminium tonearmprecision aluminium headshell and VTA adjustmentdynamically balanced and damped counterweightmagnetic anti-skatingAC synchronous motor for superior speed stabilityhigh quality Ortofon OM 5E cartridge properly aligned and mountedprecision stainless steel main bearing sheathed in Tef-lon® for noise-free fluid operationdynamically balanced alloy platter with soft felt mathigh quality gold RCA connectorsspecial vibration-damping adjustable feetdust cover and 45rpm adaptor included

mmf-11.3 TurntableWe are never still at Music Hall. We’re always seeking to improve upon our past successes and push the limit of what’s possible with each product we design. The Music Hall 11.3 represents the culmination of years of R&D and is the finest example of our design philosophy.Unique TechnologyWe made significant changes to the motor assembly and its placement. The motor now sits on its own isolation platform separate from the turntable. This alteration and other changes to the overall size of the table has significantly elevated the performance and sound of the 11.3. It’s our finest achievement to date.Vibration dampingMoving the main bearing to the second plinth improved cartridge tracking and significantly lowered background noise. The adjustable magnetic-levitation isolation feet and all wiring are mounted on the bottom plinth.—The material used for the hemispheres which separate each of the four main plinths and provide additional vibration damping has been refined and improved. A TPE material is now used, custom designed for music hall, which is able to isolate all the plinth-layers more efficiently. The bottom plinth functions as a mass-loaded resonant sink for the entire turntable.Features List:music hall’s unique quadruple-plinth design with improved TPE vibration isolationnew freestanding and completely isolated motor assemblydual motor and flywheel assembly is located on the center left side of the turntable eliminating all motor and belt vibration from the cartridgeone-piece 9cc Evolution carbon fiber tonearmtonearm uses hardened Swiss ABEC 7 ball races in inverted bearingtonearm is internally wired with flexible wire drawn from high purity copper with only two contact points from cartridge to output connectorscounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperfully adjustable VTA, azimuth, and dampened arm liftexclusive microprocessor electronic speed control with dual motor single flywheel drive system33 1/3 and 45rpm speed change at the touch of a buttonadjustable magnetic-levitation feetinverted ceramic main bearing for ultra-quiet operation7.4lbs (3.35kg) acrylic platterdetachable phono cablehigh quality gold-plated RCA connectorsdisplay-style large removable acrylic dust coverpacked securely in a substantial wood boxexcellent instruction manual and easy assembly

mmf-11.3 TurntableWe are never still at Music Hall. We’re always seeking to improve upon our past successes and push the limit of what’s possible with each product we design. The Music Hall 11.3 represents the culmination of years of R&D and is the finest example of our design philosophy.Unique TechnologyWe made significant changes to the motor assembly and its placement. The motor now sits on its own isolation platform separate from the turntable. This alteration and other changes to the overall size of the table has significantly elevated the performance and sound of the 11.3. It’s our finest achievement to date.Vibration dampingMoving the main bearing to the second plinth improved cartridge tracking and significantly lowered background noise. The adjustable magnetic-levitation isolation feet and all wiring are mounted on the bottom plinth.—The material used for the hemispheres which separate each of the four main plinths and provide additional vibration damping has been refined and improved. A TPE material is now used, custom designed for music hall, which is able to isolate all the plinth-layers more efficiently. The bottom plinth functions as a mass-loaded resonant sink for the entire turntable.Features List:music hall’s unique quadruple-plinth design with improved TPE vibration isolationnew freestanding and completely isolated motor assemblydual motor and flywheel assembly is located on the center left side of the turntable eliminating all motor and belt vibration from the cartridgeone-piece 9cc Evolution carbon fiber tonearmtonearm uses hardened Swiss ABEC 7 ball races in inverted bearingtonearm is internally wired with flexible wire drawn from high purity copper with only two contact points from cartridge to output connectorscounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperfully adjustable VTA, azimuth, and dampened arm liftexclusive microprocessor electronic speed control with dual motor single flywheel drive system33 1/3 and 45rpm speed change at the touch of a buttonadjustable magnetic-levitation feetinverted ceramic main bearing for ultra-quiet operation7.4lbs (3.35kg) acrylic platterdetachable phono cablehigh quality gold-plated RCA connectorsdisplay-style large removable acrylic dust coverpacked securely in a substantial wood boxexcellent instruction manual and easy assembly

mmf-11.3 TurntableWe are never still at Music Hall. We’re always seeking to improve upon our past successes and push the limit of what’s possible with each product we design. The Music Hall 11.3 represents the culmination of years of R&D and is the finest example of our design philosophy.Unique TechnologyWe made significant changes to the motor assembly and its placement. The motor now sits on its own isolation platform separate from the turntable. This alteration and other changes to the overall size of the table has significantly elevated the performance and sound of the 11.3. It’s our finest achievement to date.Vibration dampingMoving the main bearing to the second plinth improved cartridge tracking and significantly lowered background noise. The adjustable magnetic-levitation isolation feet and all wiring are mounted on the bottom plinth.—The material used for the hemispheres which separate each of the four main plinths and provide additional vibration damping has been refined and improved. A TPE material is now used, custom designed for music hall, which is able to isolate all the plinth-layers more efficiently. The bottom plinth functions as a mass-loaded resonant sink for the entire turntable.Features List:music hall’s unique quadruple-plinth design with improved TPE vibration isolationnew freestanding and completely isolated motor assemblydual motor and flywheel assembly is located on the center left side of the turntable eliminating all motor and belt vibration from the cartridgeone-piece 9cc Evolution carbon fiber tonearmtonearm uses hardened Swiss ABEC 7 ball races in inverted bearingtonearm is internally wired with flexible wire drawn from high purity copper with only two contact points from cartridge to output connectorscounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperfully adjustable VTA, azimuth, and dampened arm liftexclusive microprocessor electronic speed control with dual motor single flywheel drive system33 1/3 and 45rpm speed change at the touch of a buttonadjustable magnetic-levitation feetinverted ceramic main bearing for ultra-quiet operation7.4lbs (3.35kg) acrylic platterdetachable phono cablehigh quality gold-plated RCA connectorsdisplay-style large removable acrylic dust coverpacked securely in a substantial wood boxexcellent instruction manual and easy assembly

mmf-9.3 TurntableThe Music Hall mmf-9.3 turntable is a two speed, belt driven audiophile turntable employing the unique triple plinth construction originated by Music Hall. Distinctive DesignThe distinctive design isolates the critical sound reproducing components: platter, main bearing, tonearm, and cartridge, on the top platform, from the adjustable tip-toe feet and wiring, which are mounted on the bottom platform. The motor and speed controls are isolated on their own vibration damping base and completely decoupled from the turntable. Sorbothane hemispheres separate each of the three platforms and provide additional suspension and vibration damping.Our Penultimate TurntableThe mmf-9.3 comes in a high-gloss piano black lacquer finish and is available with or without a Goldring Eroica LX cartridge.Feature List:music hall’s unique triple plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 1⁄3 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance damping puckoptional Goldring Eroica LX low-output moving-coil cartridge with Gyger II line contact stylusthe cartridge supplied is properly aligned and mountedinverted ceramic main bearing for super quiet, fluid operationnon resonant, 1” thick acrylic plattersoft felt platter mathigh quality gold RCA connectors and detachable phono cableadjustable tip toe feet with anti scratch cupslow noise fully manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly

mmf-9.3 TurntableThe Music Hall mmf-9.3 turntable is a two speed, belt driven audiophile turntable employing the unique triple plinth construction originated by Music Hall. Distinctive DesignThe distinctive design isolates the critical sound reproducing components: platter, main bearing, tonearm, and cartridge, on the top platform, from the adjustable tip-toe feet and wiring, which are mounted on the bottom platform. The motor and speed controls are isolated on their own vibration damping base and completely decoupled from the turntable. Sorbothane hemispheres separate each of the three platforms and provide additional suspension and vibration damping.Our Penultimate TurntableThe mmf-9.3 comes in a high-gloss piano black lacquer finish and is available with or without a Goldring Eroica LX cartridge.Feature List:music hall’s unique triple plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 1⁄3 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance damping puckoptional Goldring Eroica LX low-output moving-coil cartridge with Gyger II line contact stylusthe cartridge supplied is properly aligned and mountedinverted ceramic main bearing for super quiet, fluid operationnon resonant, 1” thick acrylic plattersoft felt platter mathigh quality gold RCA connectors and detachable phono cableadjustable tip toe feet with anti scratch cupslow noise fully manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly

mmf-9.3 TurntableThe Music Hall mmf-9.3 turntable is a two speed, belt driven audiophile turntable employing the unique triple plinth construction originated by Music Hall. Distinctive DesignThe distinctive design isolates the critical sound reproducing components: platter, main bearing, tonearm, and cartridge, on the top platform, from the adjustable tip-toe feet and wiring, which are mounted on the bottom platform. The motor and speed controls are isolated on their own vibration damping base and completely decoupled from the turntable. Sorbothane hemispheres separate each of the three platforms and provide additional suspension and vibration damping.Our Penultimate TurntableThe mmf-9.3 comes in a high-gloss piano black lacquer finish and is available with or without a Goldring Eroica LX cartridge.Feature List:music hall’s unique triple plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 1⁄3 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance damping puckoptional Goldring Eroica LX low-output moving-coil cartridge with Gyger II line contact stylusthe cartridge supplied is properly aligned and mountedinverted ceramic main bearing for super quiet, fluid operationnon resonant, 1” thick acrylic plattersoft felt platter mathigh quality gold RCA connectors and detachable phono cableadjustable tip toe feet with anti scratch cupslow noise fully manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly

mmf-7.3se TurntableThe Music Hall mmf-7.3se turntable is a 2-Speed, belt-driven audiophile turntable employing the unique dual-plinth construction originated by Music Hall.Distinctive DesignThe distinctive design of the mmf-7.3se isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the adjustable tip-toe feet which are mounted on the bottom platform. The motor speed controls, and wiring are isolated on their own platform and completely decoupled from the turntable.Vibration DampingSorbothane hemispheres separate the two platforms and provide additional suspension and vibration damping. The mmf-7.3se is available with or without the Ortofon 2M Bronze cartridge.Feature List:music hall’s unique dual-plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance-damping puckoptional Ortofon 2M Bronze cartridge with a nude fine line stylusthe supplied cartridge is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free, fluid operationnon-resonant acrylic platter with metal screw-on record clamp and soft felt mathigh-quality gold RCA connectors and detachable phono cableadjustable tip-toe feet with anti scratch cupslow-noise, fully-manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly

mmf-7.3 TurntableThe Music Hall mmf-7.3 turntable is a 2-Speed, belt-driven audiophile turntable employing the unique dual-plinth construction originated by Music Hall.Distinctive DesignThe distinctive design of the mmf-7.3 isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the adjustable tip-toe feet which are mounted on the bottom platform. The motor speed controls, and wiring are isolated on their own platform and completely decoupled from the turntable.Vibration DampingSorbothane hemispheres separate the two platforms and provide additional suspension and vibration damping. The mmf-7.3 is available with or without the Ortofon 2M Bronze cartridge.Feature List:music hall’s unique dual-plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance-damping puckoptional Ortofon 2M Bronze cartridge with a nude fine line stylusthe supplied cartridge is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free, fluid operationnon-resonant acrylic platter with metal screw-on record clamp and soft felt mathigh-quality gold RCA connectors and detachable phono cableadjustable tip-toe feet with anti scratch cupslow-noise, fully-manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly

mmf-3.3 TurntableOur first entry-level table utilizing the unique dual-plinth technology!Focus on ComponentsThe 3-speed belt driven table was developed for those seeking a perfectly matched set of features with an uncompromising focus on sound performance.The Complete PackageThe mmf-3.3 comes complete with a tonearm and Ortofon 2M Red cartridge precision mounted.We are pleased to introduce our first entry-level table utilizing the unique dual-plinth technology originated by music hall. The mmf-3.3 embodies the culmination of over 30 years of research, development, and most important of all, listening. The 3-speed belt driven table was developed for those seeking a perfectly matched set of features with an uncompromising focus on sound performance. The 3.3 is constructed using high quality components and comes complete with a tonearm, cartridge mounted, and dust cover.Speed ControlThe 3.3 has a built-in electronic speed control for 33/45/and 78. The platter speed switches from 33 to 45 rpm at the touch of a button. 78 rpm requires the movement of the belt to a different location on the motor pulley, and the use of a different belt, included with the turntable.Carbon Fiber Arm with Bonded Alloy HeadshellThis tonearm is unique to music hall. Bonding the alloy headshell to the carbon arm-tube stiffens and dampens the carbon fiber tube. This construction significantly improves the sound and performance over similar looking one-piece carbon arms. The alloy headshell allows you to securely mount the cartridge to the tonearm without the twist and flex that is common in lesser one-piece carbon arms. Tonearms should not twist/flex as this negatively impacts the cartridge and tonearm’s ability to properly track the record groove. On many one-piece carbon tonearms, you can literally pinch the cartridge end of arm between your thumb and forefinger and twist/flex the arm-tube. Try this with the music hall and the tonearm remains rigid as your fingers begin to ache. The arm itself is housed in a 4-point gimbal bearing construction using Swiss ABEC bearings. This is superior to many of music hall’s competitors who use a lesser 2-point bearing system.Feature List:Music Hall’s unique dual-plinth design – isolating the electronics and motor from the main bearing and tonearm33⅓, 45, or 78rpm speeds at the touch of a buttonElectronic speed controlled DC motor for superior speed stability, isolated on lower plinthCustom carbon fiber tonearm with alloy headshell for superb tracking abilityFlexible internal tonearm wire drawn from high purity copperCounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperHighly regarded Ortofon 2M Red cartridge with replaceable elliptical stylusThe cartridge supplied is properly aligned and mountedHigh precision stainless steel and bronze main bearing assembly for quiet fluid operationSpecial vibration damping adjustable feetHigh quality gold RCA connectors with detachable phono cableFull-size alloy platter and felt matQuick and easy to assembleDust cover and 45rpm adaptor included

mmf-3.3 TurntableOur first entry-level table utilizing the unique dual-plinth technology!Focus on ComponentsThe 3-speed belt driven table was developed for those seeking a perfectly matched set of features with an uncompromising focus on sound performance.The Complete PackageThe mmf-3.3 comes complete with a tonearm and Ortofon 2M Red cartridge precision mounted.We are pleased to introduce our first entry-level table utilizing the unique dual-plinth technology originated by music hall. The mmf-3.3 embodies the culmination of over 30 years of research, development, and most important of all, listening. The 3-speed belt driven table was developed for those seeking a perfectly matched set of features with an uncompromising focus on sound performance. The 3.3 is constructed using high quality components and comes complete with a tonearm, cartridge mounted, and dust cover.Speed ControlThe 3.3 has a built-in electronic speed control for 33/45/and 78. The platter speed switches from 33 to 45 rpm at the touch of a button. 78 rpm requires the movement of the belt to a different location on the motor pulley, and the use of a different belt, included with the turntable.Carbon Fiber Arm with Bonded Alloy HeadshellThis tonearm is unique to music hall. Bonding the alloy headshell to the carbon arm-tube stiffens and dampens the carbon fiber tube. This construction significantly improves the sound and performance over similar looking one-piece carbon arms. The alloy headshell allows you to securely mount the cartridge to the tonearm without the twist and flex that is common in lesser one-piece carbon arms. Tonearms should not twist/flex as this negatively impacts the cartridge and tonearm’s ability to properly track the record groove. On many one-piece carbon tonearms, you can literally pinch the cartridge end of arm between your thumb and forefinger and twist/flex the arm-tube. Try this with the music hall and the tonearm remains rigid as your fingers begin to ache. The arm itself is housed in a 4-point gimbal bearing construction using Swiss ABEC bearings. This is superior to many of music hall’s competitors who use a lesser 2-point bearing system.Feature List:Music Hall’s unique dual-plinth design – isolating the electronics and motor from the main bearing and tonearm33⅓, 45, or 78rpm speeds at the touch of a buttonElectronic speed controlled DC motor for superior speed stability, isolated on lower plinthCustom carbon fiber tonearm with alloy headshell for superb tracking abilityFlexible internal tonearm wire drawn from high purity copperCounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperHighly regarded Ortofon 2M Red cartridge with replaceable elliptical stylusThe cartridge supplied is properly aligned and mountedHigh precision stainless steel and bronze main bearing assembly for quiet fluid operationSpecial vibration damping adjustable feetHigh quality gold RCA connectors with detachable phono cableFull-size alloy platter and felt matQuick and easy to assembleDust cover and 45rpm adaptor included

mmf-2.3 Turntable including phono-preamp The Music Hall mmf-2.3 turntable is a 2-speed belt driven audiophile turntable at a budget price.Focus on ComponentsConstructed using high quality components, the mmf-2.3 has been simplified to focus on the critical components: bearing, motor, and tonearm.The Complete PackageThe mmf-2.3 comes complete with a tonearm and music hall spirit cartridge precision mounted. Feature List:special vibration damping adjustable feettop tier 8.6” carbon fiber tonearm with aluminum headshellfully adjustable VTA, azimuth, and dampened arm lift mechanismtonearm features a 4-point gimbal bearing assembly using ultra-precision ABEC bearingslow noise fully manual belt-drive designseparately isolated DC synchronous motor for superior speed stabilitytwo-speed stepped motor pulley for 33 1⁄3 and 45rpmmusic hall Spirit moving-magnet cartridge with replaceable elliptical stylusthe cartridge supplied is properly aligned and mountedhigh precision stainless steel and bronze bearing assembly for quiet, fluid operationhigh quality gold RCA connectors with detachable phono cablefull-size alloy platter and felt matexcellent instruction manualquick and easy to assembledust cover and 45rpm adaptor

The Elipson Chroma 400 is a belt-driven manual turntable with an elegant design offering a lacquered paint or satin wood finish. Benefiting from our latest electronic and mechanical technologies, it is assembled in France in our premises.The Elipson Chroma 400 offers the characteris-tics that contributed to the success of the Omega models such as the OTT (Orbital Torsion Tonearm) tonearm in carbon, its digital processing system of the motor rotation. It is distinguished by a new axis system for an even more precise rotation, an improved drive motor with optimized damping, a graduated counterweight, as well as by the addition of a cue control lever for your comfort of use.

The Elipson Chroma 400 is a belt-driven manual turntable with an elegant design offering a lacquered paint or satin wood finish. Benefiting from our latest electronic and mechanical technologies, it is assembled in France in our premises.The Elipson Chroma 400 offers the characteris-tics that contributed to the success of the Omega models such as the OTT (Orbital Torsion Tonearm) tonearm in carbon, its digital processing system of the motor rotation. It is distinguished by a new axis system for an even more precise rotation, an improved drive motor with optimized damping, a graduated counterweight, as well as by the addition of a cue control lever for your comfort of use.

Περιγραφή Πλήρως αυτόματο Plug & Play-πικάπ για αρχάριους με κεφαλή AT3600 και ενσωματωμένο Phono Pre.

mmf-11.3 TurntableWe are never still at Music Hall. We’re always seeking to improve upon our past successes and push the limit of what’s possible with each product we design. The Music Hall 11.3 represents the culmination of years of R&D and is the finest example of our design philosophy.Unique TechnologyWe made significant changes to the motor assembly and its placement. The motor now sits on its own isolation platform separate from the turntable. This alteration and other changes to the overall size of the table has significantly elevated the performance and sound of the 11.3. It’s our finest achievement to date.Vibration dampingMoving the main bearing to the second plinth improved cartridge tracking and significantly lowered background noise. The adjustable magnetic-levitation isolation feet and all wiring are mounted on the bottom plinth.—The material used for the hemispheres which separate each of the four main plinths and provide additional vibration damping has been refined and improved. A TPE material is now used, custom designed for music hall, which is able to isolate all the plinth-layers more efficiently. The bottom plinth functions as a mass-loaded resonant sink for the entire turntable.Features List:music hall’s unique quadruple-plinth design with improved TPE vibration isolationnew freestanding and completely isolated motor assemblydual motor and flywheel assembly is located on the center left side of the turntable eliminating all motor and belt vibration from the cartridgeone-piece 9cc Evolution carbon fiber tonearmtonearm uses hardened Swiss ABEC 7 ball races in inverted bearingtonearm is internally wired with flexible wire drawn from high purity copper with only two contact points from cartridge to output connectorscounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperfully adjustable VTA, azimuth, and dampened arm liftexclusive microprocessor electronic speed control with dual motor single flywheel drive system33 1/3 and 45rpm speed change at the touch of a buttonadjustable magnetic-levitation feetinverted ceramic main bearing for ultra-quiet operation7.4lbs (3.35kg) acrylic platterdetachable phono cablehigh quality gold-plated RCA connectorsdisplay-style large removable acrylic dust coverpacked securely in a substantial wood boxexcellent instruction manual and easy assembly

mmf-9.3 TurntableThe Music Hall mmf-9.3 turntable is a two speed, belt driven audiophile turntable employing the unique triple plinth construction originated by Music Hall. Distinctive DesignThe distinctive design isolates the critical sound reproducing components: platter, main bearing, tonearm, and cartridge, on the top platform, from the adjustable tip-toe feet and wiring, which are mounted on the bottom platform. The motor and speed controls are isolated on their own vibration damping base and completely decoupled from the turntable. Sorbothane hemispheres separate each of the three platforms and provide additional suspension and vibration damping.Our Penultimate TurntableThe mmf-9.3 comes in a high-gloss piano black lacquer finish and is available with or without a Goldring Eroica LX cartridge.Feature List:music hall’s unique triple plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 1⁄3 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance damping puckoptional Goldring Eroica LX low-output moving-coil cartridge with Gyger II line contact stylusthe cartridge supplied is properly aligned and mountedinverted ceramic main bearing for super quiet, fluid operationnon resonant, 1” thick acrylic plattersoft felt platter mathigh quality gold RCA connectors and detachable phono cableadjustable tip toe feet with anti scratch cupslow noise fully manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly

mmf-7.3se TurntableThe Music Hall mmf-7.3se turntable is a 2-Speed, belt-driven audiophile turntable employing the unique dual-plinth construction originated by Music Hall.Distinctive DesignThe distinctive design of the mmf-7.3se isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the adjustable tip-toe feet which are mounted on the bottom platform. The motor speed controls, and wiring are isolated on their own platform and completely decoupled from the turntable.Vibration DampingSorbothane hemispheres separate the two platforms and provide additional suspension and vibration damping. The mmf-7.3se is available with or without the Ortofon 2M Bronze cartridge.Feature List:music hall’s unique dual-plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance-damping puckoptional Ortofon 2M Bronze cartridge with a nude fine line stylusthe supplied cartridge is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free, fluid operationnon-resonant acrylic platter with metal screw-on record clamp and soft felt mathigh-quality gold RCA connectors and detachable phono cableadjustable tip-toe feet with anti scratch cupslow-noise, fully-manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly

mmf-7.3 TurntableThe Music Hall mmf-7.3 turntable is a 2-Speed, belt-driven audiophile turntable employing the unique dual-plinth construction originated by Music Hall.Distinctive DesignThe distinctive design of the mmf-7.3 isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the adjustable tip-toe feet which are mounted on the bottom platform. The motor speed controls, and wiring are isolated on their own platform and completely decoupled from the turntable.Vibration DampingSorbothane hemispheres separate the two platforms and provide additional suspension and vibration damping. The mmf-7.3 is available with or without the Ortofon 2M Bronze cartridge.Feature List:music hall’s unique dual-plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance-damping puckoptional Ortofon 2M Bronze cartridge with a nude fine line stylusthe supplied cartridge is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free, fluid operationnon-resonant acrylic platter with metal screw-on record clamp and soft felt mathigh-quality gold RCA connectors and detachable phono cableadjustable tip-toe feet with anti scratch cupslow-noise, fully-manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly

stealth TurntableThe Music Hall stealth turntable—our first direct drive turntable— features a brushless low-torque motor that automatically stops running at the end of a record.A Sound FoundationThis substantial this 24-pound turntable attenuates external vibrations by utilizing what Michael Fremer notes is “an unusually heavy, multi-layer and well-damped chassis as well as large, viscous-elastomer damped height-adjustable feet and a 4 pound, elastomer-damped… aluminum platter”.Ready to PlayStealth is a 3-speed direct drive turntable that comes complete with an s-shaped tonearm, a detachable headshell, and a factory-mounted, precision aligned Ortofon 2M Blue cartridge.Feature List:direct drive designlow torque, brushless motor touch-activated electronic speed control33 1⁄3, 45, and 78rpmmotor automatically stops at the end of the recordautomatic standby mode activated after 20 minutes of non-usealuminum tonearm with VTA that can be adjusted while the record is playingremovable head shellOrtofon 2M Blue cartridge comes pre-mounted and precision-aligned4-pound aluminum plattervibration-damping rubber platter matvibration-damping feetcloth dust coverremovable RCA cables

mmf-5.3se TurntableThe Music Hall mmf-5.3se turntable is 2-Speed belt driven audiophile turntable employing the unique dual-plinth construction originated by Music Hall. It features a gorgeous and classic-looking rosenut real wood veneer finish.Distinctive DesignThe distinctive design isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the motor, switch, wiring, and feet which are mounted on the bottom platform.A Complete PackageViso-elastic cones separate the two platforms and provide vibration damping. The mmf-5.3se comes complete with an Ortofon 2M Blue cartridge.Feature List:Music Hall’s unique dual-plinth constructiontop tier 9” carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damperDC synchronous motor for superior speed stability, separately isolated on the lower platformtwo-speed stepped motor pulley for 33 1/3 and 45rpmOrtofon 2M Blue cartridge with replaceable nude elliptical diamond stylusthe cartridge supplied is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free fluid operationalloy platter with soft felt mat screw-on record clamphigh quality gold RCA connectorsdetachable phono cablespecial vibration damping adjustable feetbuilt-in round spirit level for proper levelinglow noise fully manual belt-drive designexcellent instruction manual and easy assemblydust cover and 45rpm adaptor included

mmf-5.3 TurntableThe Music Hall mmf-5.3 turntable is 2-Speed belt driven audiophile turntable employing the unique dual-plinth construction originated by Music Hall.Distinctive DesignThe distinctive design isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the motor, switch, wiring, and feet which are mounted on the bottom platform.A Complete PackageViso-elastic cones separate the two platforms and provide vibration damping. The mmf-5.3 comes complete with an Ortofon 2M Blue cartridge.Dust CoverThe included hinged dust cover keeps your mmf-5.3wh protected.Pre-Mounted CartridgeAn Ortofon 2M Blue cartridge comes precision mounted and aligned.Built-In LevelThe 5.3wh has a built-in round spirit level for proper leveling.Rear Viewtop-quality RCA jacks and special vibration damping adjustable feet.Feature List:Music Hall’s unique dual-plinth constructiontop tier 9” carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damperDC synchronous motor for superior speed stability, separately isolated on the lower platformtwo-speed stepped motor pulley for 33 1/3 and 45rpmOrtofon 2M Blue cartridge with replaceable nude elliptical diamond stylusthe cartridge supplied is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free fluid operationalloy platter with soft felt mat screw-on record clamphigh quality gold RCA connectorsdetachable phono cablespecial vibration damping adjustable feetbuilt-in round spirit level for proper levelinglow noise fully manual belt-drive designexcellent instruction manual and easy assemblydust cover and 45rpm adaptor included