Πικάπ

Sub chassis with three conical springsBelt drive with polished precision beltMassive 1.4 kg and 22mm-thick Die-cast aluminum platterPre-installed cartridge Ortofon 2 M BronzeElectronical controlled motorbalanced (XLR) and unbalanced (RCA) outputThorens precision tonearm TP 150In 1965, the Thorens TD 150, an inconspicuous little turntable, came on the market and thus started a technical revolution in record player manufacturing. For the first time, a spring-suspended sub-chassis with an inner platter driven by a flat belt was used in a mass-produced unit. The principle proved to be very successful and found many imitators in the years since.Like its famous predecessor, the new Thorens TD 1500, which will be operated purely manually, features a sub-chassis that decouples the turntable and tonearm shelf from the motor and frame by means of three conical springs. In contrast to the TD 150, these springs can be adjusted from above through corresponding holes in the platter, which makes correct adjustment much easier.The speed of the DC motor is electronically monitored by an incremental encoder and deviations, e.g. caused by a broom, are automatically corrected. This also enables very good wow and flutter values.As a real unique selling point in its class, the TD 1500 has XLR outputs in addition to the usual pair of RCA jacks, thus enabling true balanced operation with a suitable MC cartridge.Newly developed Thorens TP 150 tonearmThe new TP 150 tonearm is similar to the TP 124 used on the new TD 124 DD. It has an effective mass of 14 grams, is adjustable in height and azimuth and is equipped with a standard SME connector, so headshells can easily be switched or other cartridges mounted.The anti-skating is set by a sliding weight in the base of the arm, which is adjusted on a nylon thread guided over a ruby bearing.A high-quality and pre-adjusted 2M Bronze pickup from the Danish pickup specialist Ortofon, is also supplied as standard. This proves to be a perfect playing partner due to its naked diamond with Fine Line cut.

Stable and super silent direct driveTHORENS TP 150 tonearmDetachable SME HeadshellMassive 1.4 kg and 22mm-thick Die-cast aluminum platterPre installed cartridge Ortofon 2 M BlueWith the new model TD 403 DD Thorens completes the line of direct drive plug-and-play turntables of the 400 series. Visually a true Thorens, the new TD 403 DD features the same proven smooth-running direct drive as the successful TD 402 DD, but sets itself apart from its smaller brother with a more massive 1.4 kg and 22mm-thick Die-cast aluminum platter and the TP 150 audiophile tonearm also used in the new TD 1500 model.A high-quality and pre-adjusted 2M Blue cartridge from Danish cartridge specialist Ortofon is also supplied as standard. This proves to be an adequate playing partner due to its naked diamond with elliptical stylus.

Stable and super silent direct driveTHORENS TP 150 tonearmDetachable SME HeadshellMassive 1.4 kg and 22mm-thick Die-cast aluminum platterPre installed cartridge Ortofon 2 M BlueWith the new model TD 403 DD Thorens completes the line of direct drive plug-and-play turntables of the 400 series. Visually a true Thorens, the new TD 403 DD features the same proven smooth-running direct drive as the successful TD 402 DD, but sets itself apart from its smaller brother with a more massive 1.4 kg and 22mm-thick Die-cast aluminum platter and the TP 150 audiophile tonearm also used in the new TD 1500 model.A high-quality and pre-adjusted 2M Blue cartridge from Danish cartridge specialist Ortofon is also supplied as standard. This proves to be an adequate playing partner due to its naked diamond with elliptical stylus.

FeaturesSmooth running belt driveThorens TP 120 9” tonearm with J shapeDetachable headshell with SME connectorSwitchable MM phono preamplifierDie-cast aluminum platterA turntable with sound expansion potential for audiophiles.The surface finishes "black high gloss" and "walnut high gloss" fit seamlessly into the existing range with the typical THORENS design. The brand identity is underlined by the high processing quality and guarantees a long life like all Thorens turntables.The newly developed TP 120 tonearm impresses with its high-quality bearing technology. The bearing play and the coefficients of friction could be reduced to an astonishingly low level for the price class by using modern bearings. The TP 120 is a real 9" J-shaped aluminum tonearm with an effective tonearm mass of 15 grams. The visual similarity to the larger models TP 150 and TP 124 is obvious and promises first-class properties.The detachable headshell with SME connector is equipped with an AT95E from the Japanese pickup specialist Audio Technica. The skating compensation is carried out via a spring.The connection terminal on the back shows high-quality RCA sockets for a solid connection to the amplifier. An integrated MM phono pre (which can be switched on/off) enables direct connection to a high-level input.The platter, which is precisely manufactured from die-cast aluminum, is set in rotation by a precision drive belt. The plinth of the TD 204 rests on four vibration-damping feet.

FeaturesSmooth running belt driveThorens TP 120 9” tonearm with J shapeDetachable headshell with SME connectorSwitchable MM phono preamplifierDie-cast aluminum platterA turntable with sound expansion potential for audiophiles.The surface finishes "black high gloss" and "walnut high gloss" fit seamlessly into the existing range with the typical THORENS design. The brand identity is underlined by the high processing quality and guarantees a long life like all Thorens turntables.The newly developed TP 120 tonearm impresses with its high-quality bearing technology. The bearing play and the coefficients of friction could be reduced to an astonishingly low level for the price class by using modern bearings. The TP 120 is a real 9" J-shaped aluminum tonearm with an effective tonearm mass of 15 grams. The visual similarity to the larger models TP 150 and TP 124 is obvious and promises first-class properties.The detachable headshell with SME connector is equipped with an AT95E from the Japanese pickup specialist Audio Technica. The skating compensation is carried out via a spring.The connection terminal on the back shows high-quality RCA sockets for a solid connection to the amplifier. An integrated MM phono pre (which can be switched on/off) enables direct connection to a high-level input.The platter, which is precisely manufactured from die-cast aluminum, is set in rotation by a precision drive belt. The plinth of the TD 204 rests on four vibration-damping feet.

Tone-arm-free DVS control eliminates skipping in digital playbackNo matter how hard you scratch, you’ll never experience needle skipping when you use the PLX-CRSS12 in Digital Vinyl mode, thanks to the tone-arm-free system. The new MAGVEL CLAMP holds a record firmly in place when you touch it, enabling it to directly control the digital music file, giving you the true feeling of vinyl with no need to use the tone arm. When playing analog records, the experience will be just like using the popular PLX-1000 deck.Feeling adjustment to suit your styleYou can quickly adjust the record's "weight" with the dial on top of the MAGVEL CLAMP. This means you can effortlessly continue your performance without the hassle of changing slip mats or slip sheets.Customizable torque levelIt's easy to change the turntable rotation torque level in the utility settings to suit your preference. You can choose from "High" for quick startup when you press PLAY, "Low" for the traditional torque speed that many DJs are familiar with, and "Mid" for a balance between the two.Adjustable stopping speedUse the switch on the front of the deck to adjust the time it takes for the turntable to stop when you press STOP. The "Min" is sharp. The "Mid" uses a traditional stopping speed that's familiar to DJs. And the "Max" creates the longest stopping speed for a gradual and dramatic finish to a track or performance.Performance Pads for accurate and rapid controlThe PLX-CRSS12 inherits classic turntable layout elements, but a new addition is the 4 built-in MIDI-mappable Performance Pads which put your favorite features at your fingertips. They’re right where you need them – just below the platter – so you can fire off Hot Cues and samples quicker than ever, which comes in handy even more if you’re performing on a mixer that has no pads. There’s native support for various pad modes (see below), and a dedicated button enables you to switch control from pads 1-4 to 5-8. The pads are MIDI mappable too, so you can assign them to other features.OLED display for quick confirmation of track informationThe built-in OLED display also helps you focus on the deck. You can keep an eye on the tempo range and key when Step Pitching and, when you connect the PLX-CRSS12 via USB to your PC/Mac running DJ software, you can reference BPM, key, deck number information. The display also gives you quick access to the utility settings – all of which reduces the need to break concentration and look at your laptop or mixer during a performance.High-quality sound reproduction of analog records, evolved from the PLX-1000Let your audience enjoy your music the way it was intended to be heard. The PLX-CRSS12 has been carefully built to improve on the sound quality of the PLX-1000 professional DJ turntable, which is highly acclaimed for its accurate sound reproduction.*Available with Link Export and the CloudDirectPlay feature in Rekordbox for Mac/Windows or Rekordbox for iOS/Android.Robust and elegant design in matte black colorThe PLX-CRSS12 has a matte black color scheme, with special coatings applied to the tone arm and other metal parts, plus carefully crafted details that give it a robust and elegant appearance.

Superior PlatterAlu, TPE & VinylPrecision 10kg aluminium platter with TPE damping ring inside. The vinyl layer on top builds the best surface for your records.Hi-Tech FeetMagnetic decouplingThree powerful magnetic feet effectively decouple the turntable & let it float over the surface.33 / 45 RPMPrecision motor controlThe precision DC-driven AC generator powers the motor for enhanced speed stability. Easily change speeds with the push of a button.Silent BearingSpecial technologyThe heavyweight platter spins on an inverted ceramic ball bearing with a magnetic support to reduce bearing noise and resonance to an absolute minimum.High End Magnetic Suspension FeetMany turntable manufacturers forget that the feet are one of the most important parts of a turntable. Therefore, we wanted the best possible solution for the premium Xtension 10 Evolution.With its superlative magnetic feet, this heavy turntable literally floats over the surface. These powerful magnets effectively decouple the turntable from its below base.

Superior PlatterAlu, TPE & VinylPrecision 10kg aluminium platter with TPE damping ring inside. The vinyl layer on top builds the best surface for your records.Hi-Tech FeetMagnetic decouplingThree powerful magnetic feet effectively decouple the turntable & let it float over the surface.33 / 45 RPMPrecision motor controlThe precision DC-driven AC generator powers the motor for enhanced speed stability. Easily change speeds with the push of a button.Silent BearingSpecial technologyThe heavyweight platter spins on an inverted ceramic ball bearing with a magnetic support to reduce bearing noise and resonance to an absolute minimum.High End Magnetic Suspension FeetMany turntable manufacturers forget that the feet are one of the most important parts of a turntable. Therefore, we wanted the best possible solution for the premium Xtension 10 Evolution.With its superlative magnetic feet, this heavy turntable literally floats over the surface. These powerful magnets effectively decouple the turntable from its below base.

Superior PlatterAlu, TPE & VinylPrecision 10kg aluminium platter with TPE damping ring inside. The vinyl layer on top builds the best surface for your records.Hi-Tech FeetMagnetic decouplingThree powerful magnetic feet effectively decouple the turntable & let it float over the surface.33 / 45 RPMPrecision motor controlThe precision DC-driven AC generator powers the motor for enhanced speed stability. Easily change speeds with the push of a button.Silent BearingSpecial technologyThe heavyweight platter spins on an inverted ceramic ball bearing with a magnetic support to reduce bearing noise and resonance to an absolute minimum.High End Magnetic Suspension FeetMany turntable manufacturers forget that the feet are one of the most important parts of a turntable. Therefore, we wanted the best possible solution for the premium Xtension 10 Evolution.With its superlative magnetic feet, this heavy turntable literally floats over the surface. These powerful magnets effectively decouple the turntable from its below base.

Superior PlatterAlu, TPE & VinylPrecision 10kg aluminium platter with TPE damping ring inside. The vinyl layer on top builds the best surface for your records.Hi-Tech FeetMagnetic decouplingThree powerful magnetic feet effectively decouple the turntable & let it float over the surface.33 / 45 RPMPrecision motor controlThe precision DC-driven AC generator powers the motor for enhanced speed stability. Easily change speeds with the push of a button.Silent BearingSpecial technologyThe heavyweight platter spins on an inverted ceramic ball bearing with a magnetic support to reduce bearing noise and resonance to an absolute minimum.High End Magnetic Suspension FeetMany turntable manufacturers forget that the feet are one of the most important parts of a turntable. Therefore, we wanted the best possible solution for the premium Xtension 10 Evolution.With its superlative magnetic feet, this heavy turntable literally floats over the surface. These powerful magnets effectively decouple the turntable from its below base.

10'' TonearmSingle-pivot with SME headshellThis high-end S-shape aluminium tonearm features a non magnetic low resonance construction with minimised bearing friction.10 kg PlatterMass loaded aluminiumThe 10 kg aluminium platter is TPE damped and sits on an inverted bearing which is magnetically decoupled. The vinyl layer on top is the perfect surface for your record.Decoupled FeetMagnetically decoupledMagnetic fields in the feet ensure effective mechanical decoupling of the entire player from interference.33/45 RPMElectronic speed changeEasily change the speed with the push of only a single button. The precision generator ensures the perfect playback speed with the utmost precision.The wonderfully resonance-free, mass-loaded and TPE damped platter is precision diamond-cut out of a single piece of aluminium. It runs ultra-silently on an inverted ceramic ball bearing with magnetic suspension.The new 10” single-pivot tonearm with SME headshell is a genuine Pro-Ject design and allows stepless, “on-the-fly” VTA and mounting distance settings. With its wide range of adjustment possibilities and the number of included counterweights, maximum performance can be extracted out of any cartridge.Included AccessoriesSafe transportWooden Box with everything you needYour Signature 10 comes safe and secure in a big wooden box with everything you need to set it up correctly.High-End CableConnect it 5P-CCInterconnect cable with earthing wire, 2x RCA phono plugs to 1x 5-pole standard tonearm socket.Record Puck405g weightThe sound can be significantly improved, when unwanted resonances between record and platter can be reduced.Additional ToolsPerfectly equipped & ready for useAdapter for 7'' singles, allen key, spirit level and gloves are also included for a quick & easy setup.

10'' TonearmSingle-pivot with SME headshellThis high-end S-shape aluminium tonearm features a non magnetic low resonance construction with minimised bearing friction.10 kg PlatterMass loaded aluminiumThe 10 kg aluminium platter is TPE damped and sits on an inverted bearing which is magnetically decoupled. The vinyl layer on top is the perfect surface for your record.Decoupled FeetMagnetically decoupledMagnetic fields in the feet ensure effective mechanical decoupling of the entire player from interference.33/45 RPMElectronic speed changeEasily change the speed with the push of only a single button. The precision generator ensures the perfect playback speed with the utmost precision.The wonderfully resonance-free, mass-loaded and TPE damped platter is precision diamond-cut out of a single piece of aluminium. It runs ultra-silently on an inverted ceramic ball bearing with magnetic suspension.The new 10” single-pivot tonearm with SME headshell is a genuine Pro-Ject design and allows stepless, “on-the-fly” VTA and mounting distance settings. With its wide range of adjustment possibilities and the number of included counterweights, maximum performance can be extracted out of any cartridge.Included AccessoriesSafe transportWooden Box with everything you needYour Signature 10 comes safe and secure in a big wooden box with everything you need to set it up correctly.High-End CableConnect it 5P-CCInterconnect cable with earthing wire, 2x RCA phono plugs to 1x 5-pole standard tonearm socket.Record Puck405g weightThe sound can be significantly improved, when unwanted resonances between record and platter can be reduced.Additional ToolsPerfectly equipped & ready for useAdapter for 7'' singles, allen key, spirit level and gloves are also included for a quick & easy setup.

10'' TonearmSingle-pivot with SME headshellThis high-end S-shape aluminium tonearm features a non magnetic low resonance construction with minimised bearing friction.10 kg PlatterMass loaded aluminiumThe 10 kg aluminium platter is TPE damped and sits on an inverted bearing which is magnetically decoupled. The vinyl layer on top is the perfect surface for your record.Decoupled FeetMagnetically decoupledMagnetic fields in the feet ensure effective mechanical decoupling of the entire player from interference.33/45 RPMElectronic speed changeEasily change the speed with the push of only a single button. The precision generator ensures the perfect playback speed with the utmost precision.The wonderfully resonance-free, mass-loaded and TPE damped platter is precision diamond-cut out of a single piece of aluminium. It runs ultra-silently on an inverted ceramic ball bearing with magnetic suspension.The new 10” single-pivot tonearm with SME headshell is a genuine Pro-Ject design and allows stepless, “on-the-fly” VTA and mounting distance settings. With its wide range of adjustment possibilities and the number of included counterweights, maximum performance can be extracted out of any cartridge.Included AccessoriesSafe transportWooden Box with everything you needYour Signature 10 comes safe and secure in a big wooden box with everything you need to set it up correctly.High-End CableConnect it 5P-CCInterconnect cable with earthing wire, 2x RCA phono plugs to 1x 5-pole standard tonearm socket.Record Puck405g weightThe sound can be significantly improved, when unwanted resonances between record and platter can be reduced.Additional ToolsPerfectly equipped & ready for useAdapter for 7'' singles, allen key, spirit level and gloves are also included for a quick & easy setup.

10'' TonearmSingle-pivot with SME headshellThis high-end S-shape aluminium tonearm features a non magnetic low resonance construction with minimised bearing friction.10 kg PlatterMass loaded aluminiumThe 10 kg aluminium platter is TPE damped and sits on an inverted bearing which is magnetically decoupled. The vinyl layer on top is the perfect surface for your record.Decoupled FeetMagnetically decoupledMagnetic fields in the feet ensure effective mechanical decoupling of the entire player from interference.33/45 RPMElectronic speed changeEasily change the speed with the push of only a single button. The precision generator ensures the perfect playback speed with the utmost precision.The wonderfully resonance-free, mass-loaded and TPE damped platter is precision diamond-cut out of a single piece of aluminium. It runs ultra-silently on an inverted ceramic ball bearing with magnetic suspension.The new 10” single-pivot tonearm with SME headshell is a genuine Pro-Ject design and allows stepless, “on-the-fly” VTA and mounting distance settings. With its wide range of adjustment possibilities and the number of included counterweights, maximum performance can be extracted out of any cartridge.Included AccessoriesSafe transportWooden Box with everything you needYour Signature 10 comes safe and secure in a big wooden box with everything you need to set it up correctly.High-End CableConnect it 5P-CCInterconnect cable with earthing wire, 2x RCA phono plugs to 1x 5-pole standard tonearm socket.Record Puck405g weightThe sound can be significantly improved, when unwanted resonances between record and platter can be reduced.Additional ToolsPerfectly equipped & ready for useAdapter for 7'' singles, allen key, spirit level and gloves are also included for a quick & easy setup.

10'' TonearmSingle-pivot with SME headshellThis high-end S-shape aluminium tonearm features a non magnetic low resonance construction with minimised bearing friction.10 kg PlatterMass loaded aluminiumThe 10 kg aluminium platter is TPE damped and sits on an inverted bearing which is magnetically decoupled. The vinyl layer on top is the perfect surface for your record.Decoupled FeetMagnetically decoupledMagnetic fields in the feet ensure effective mechanical decoupling of the entire player from interference.33/45 RPMElectronic speed changeEasily change the speed with the push of only a single button. The precision generator ensures the perfect playback speed with the utmost precision.The wonderfully resonance-free, mass-loaded and TPE damped platter is precision diamond-cut out of a single piece of aluminium. It runs ultra-silently on an inverted ceramic ball bearing with magnetic suspension.The new 10” single-pivot tonearm with SME headshell is a genuine Pro-Ject design and allows stepless, “on-the-fly” VTA and mounting distance settings. With its wide range of adjustment possibilities and the number of included counterweights, maximum performance can be extracted out of any cartridge.Included AccessoriesSafe transportWooden Box with everything you needYour Signature 10 comes safe and secure in a big wooden box with everything you need to set it up correctly.High-End CableConnect it 5P-CCInterconnect cable with earthing wire, 2x RCA phono plugs to 1x 5-pole standard tonearm socket.Record Puck405g weightThe sound can be significantly improved, when unwanted resonances between record and platter can be reduced.Additional ToolsPerfectly equipped & ready for useAdapter for 7'' singles, allen key, spirit level and gloves are also included for a quick & easy setup.

10'' TonearmSingle-pivot with SME headshellThis high-end S-shape aluminium tonearm features a non magnetic low resonance construction with minimised bearing friction.10 kg PlatterMass loaded aluminiumThe 10 kg aluminium platter is TPE damped and sits on an inverted bearing which is magnetically decoupled. The vinyl layer on top is the perfect surface for your record.Decoupled FeetMagnetically decoupledMagnetic fields in the feet ensure effective mechanical decoupling of the entire player from interference.33/45 RPMElectronic speed changeEasily change the speed with the push of only a single button. The precision generator ensures the perfect playback speed with the utmost precision.The wonderfully resonance-free, mass-loaded and TPE damped platter is precision diamond-cut out of a single piece of aluminium. It runs ultra-silently on an inverted ceramic ball bearing with magnetic suspension.The new 10” single-pivot tonearm with SME headshell is a genuine Pro-Ject design and allows stepless, “on-the-fly” VTA and mounting distance settings. With its wide range of adjustment possibilities and the number of included counterweights, maximum performance can be extracted out of any cartridge.Included AccessoriesSafe transportWooden Box with everything you needYour Signature 10 comes safe and secure in a big wooden box with everything you need to set it up correctly.High-End CableConnect it 5P-CCInterconnect cable with earthing wire, 2x RCA phono plugs to 1x 5-pole standard tonearm socket.Record Puck405g weightThe sound can be significantly improved, when unwanted resonances between record and platter can be reduced.Additional ToolsPerfectly equipped & ready for useAdapter for 7'' singles, allen key, spirit level and gloves are also included for a quick & easy setup.

Το νέο SME Model 35 είναι εξοπλισμένο με τον καινοτόμο βραχίονα σειράς Vi, προσφέροντας εξαιρετική απόδοση και μοντέρνα αισθητική. Η προηγμένη τεχνολογία που ενσωματώνεται στον σχεδιασμό του όχι μόνο ξεπερνά το φημισμένο πικάπ Model 30, αλλά θέτει και ένα νέο πρότυπο στην κατηγορία του.Το Model 35 διαθέτει έναν προηγμένο σχεδιασμό ανάρτησης τριών σημείων (tri-column), εμπνευσμένο από το κορυφαίο Model 60 της SME, κατασκευασμένο με εξαιρετική ακρίβεια. Το ακουστικά βελτιστοποιημένο πλαίσιο , βελτιώνει την απόδοση ελέγχοντας τους συντονίσμούς. Αυτή η προηγμένη κατασκευή προσφέρει ένα συμπαγές και κομψό προφίλ, που ενσωματώνεται άψογα σε κάθε χώρο, προσφέροντας παράλληλα εξαιρετική ποιότητα ήχου.Το SME Model 35 συνοδεύεται από τον αναβαθμισμένο βραχίονα Series Vi, όπου το "i" συμβολίζει τη βελτίωση, καταδεικνύοντας μια σημαντική αναβάθμιση σε σχέση με τον Series V. Ο βραχίονας Vi είναι κατεργασμένος μέσω CNC από πολυμερές υλικό υψηλής πυκνότητας, εξασφαλίζοντας απόλυτη ακρίβεια. Ο μονοκόμματος αυτός σχεδιασμός κατασκευάζεται με αυστηρές ανοχές και σύμφωνα με τα υψηλά πρότυπα ποιοτικού ελέγχου της SME. Ο σωλήνας του βραχίονα έχει κυκλική διατομή, προσφέροντας ελάχιστους συντονισμούς και βελτιωμένη συμπεριφορά τόσο στον βραχίονα όσο και στον άξονα, συμβάλλοντας έτσι στην ποιότητα και την φυσικότητα της τονικής ισσοροπίας του ήχου.Κάθε στοιχείο του Model 35 έχει ρυθμιστεί με ακρίβεια για άριστη απόδοση. Με τη μοντέρνα εμφάνιση και την ανώτερη απόδοσή του, αυτό το πικάπ αποτελεί την επιτομή της σύγχρονης ηχητικής μηχανικής.PRIMARY FEATURESΣχεδιασμός Τριών Σημείων Στήριξης: Αποσυνδεδεμένα πόδια με πολυσημειακή απομόνωση για ενισχυμένη απόδοση.Βελτιωμένο Σύστημα Ανάρτησης: Προηγμένος σχεδιασμός με κατακόρυφο και οριζόντιο έλεγχο για ανώτερη σταθερότητα.Κύριο Ρουλεμάν: Καινοτόμο σύστημα υδραυλικής απόσβεσης.Σασί και Πλατό: Ακουστικά ενισχυμένο κύριο σασί, υπο-σασί και πλατό.Προηγμένος Έλεγχος Ταχύτητας: Ηλεκτρονικός έλεγχος ταχύτητας τελευταίας τεχνολογίας, τροφοδοτούμενος από μοτέρ AC με ξεχωριστό μετασχηματιστή, βασισμένο στο Model 60.Βραχίονας SME Series Vi: Κατασκευασμένος από πολυμερές ρητινώδες υλικό υψηλής πυκνότητας και ακαμψίας, για ακουστική αδράνεια. Διαθέσιμα Χρώματα:Τυπικό Φινίρισμα: Μαύρο και Ασημί ανοδιωμένοΕιδικό Φινίρισμα: Midnight Blue και Gunmetal ανοδιωμένο

The MK2 Model 15 takes its inspiration from the Model 20 with its high-density construction but with a compact footprint. In seeking to emulate the engineering excellence of its bigger brother, the Model 15 is a precision turntable
delivering a dynamic audio performance. The new highly advanced drive system provides significantly improved speed
control, accuracy and stability, the Model 15 just got better.Designed with simplicity of operation that has come to be expected from all SME turntables, the Model 15 is engineered and precision made from the finest materials and to the strictest tolerances contributing to an outstanding musical performance. It’s clever styling makes it a credible addition to any sound system which will astound and amaze listeners for many years.The high-performance Model 15 is available with SME Series V tonearm. All tonearm options come complete with internal Crystal Cable wiring as standard.CONSTRUCTIONThe MK2 Model 15 is a precision turntable made to exacting engineering standards for high performance. The chassis and sub-chassis are CNC machined from premium grade aluminium billet. The sub-chassis suspended suspension system provides definitive resonance control and houses the main bearing, platter and tonearm. Three fully adjustable feet are mechanically de-coupled from the main chassis by isolators providing base resonance control.The main spindle is 19mm (3/4″) precision machined from high chrome tool steel, ground, super finished and supported in a sealed housing with individually fitted sintered bronze bearings of generous proportions needed for precise bearing and platter rotation.SUSPENSIONThe Model 15 sub-chassis is suspended on 30 purpose made suspension rings and weighs together with the platter more than 11kg (24lb), thus meeting all the requirements of high-density construction required to enable a dynamic sound free from colouration.DUMPINGSub-chassis motion is controlled by a central fluid damper which offers a resistive ground path for acoustic signals, eliminates overshoot and gives almost zero ‘Q’ recovery.PLATTERThe platter is machined from aluminium alloy and weighs over 4.6kg (10lb). The platter is extensionally dampened and the top surface iso-damp is diamond-turned with a fine scroll for acoustic performance. This method of finishing upsets a myriad of tiny fibres which Interface with the underside of the vinyl record. A substantial record clamp operating on the reflex principle ensures the largest possible platter contact even when appreciable record warp is present.MOTORThe Model 15 turntable is driven by a custom made bi-phase AC synchronous motor controlled by a highly advanced speed control unit providing precise speed accuracy and stability. The motor conforms to the highest standards of silent running.SPEED CONTROLThe Speed Control Unit uses a dedicated DSP engine to generate two independent pure mathematical sine waves which provide total control of frequency, phase relationship and amplitude. These in turn are matched (tuned) to the motor for accuracy to obtain the best possible performance.The speed range is 33.33 and 45 rpm with independent memory settings via a switched encoder. Fine pitch speed increments/decrements of +/-0.01% of the selected speed are made by a rotary control on the Speed Control Unit fascia. The SCU case is CNC machined from billet polymer resin.POWER UNITA remotely separate mains Power Unit keeps the transformer well away from the Speed Control Unit and importantly away from the audio signal cables.

The MK2 Model 12 mkII is designed and precision engineered for pure audio reproduction. The all new highly advanced drive system provides much improved speed control, accuracy and stability. This best-selling and very capable precision turntable has evolved to deliver the perfect listening experience.The Model 12A has been designed for those who would prefer to select their own unique combination of phono stage and cartridge for a more personalised listening experience. This introductory model benefits from the finest materials and craftsmanship found throughout the entire SME turntable and tonearm range. Every component part has been precision engineered in-house to the strictest tolerances to contribute to an outstanding musical performance This exciting entry level turntable uses the unique styling of Synergy and comes complete with the highly acclaimed SME Series V tonearm and internal Crystal Cable wiring as standard. The Model 12A is available in three paint finishes of traditional SME Black, Dark Grey and Dark Blue with contrasting detailing.Speed ControlThe electronic control unit uses a high-performance microprocessor, optimised for motor control. Closed loop speed control is implemented using a proportional plus integral (PI) algorithm. Speed ranges are 33.3, 45 & 78 rpm, with fine pitch speed adjustment allowing increments/decrements of +/-0.01% of the selected speed. The electronic control circuitry and power supply unit are housed in an external one-piece CNC machined case. This new design offers complete isolation and support and is the perfect environment for the electronics. Speed selection controls are mounted on the front facia panel with LED indicators.TonearmDesigned to compliment the Model 309 tonearmCrystal Cable WiringThe Model 12A is equipped with a premium grade signal cable from Crystal Cable which is installed inside the tonearm, connected to phono stage and coupled with the cartridge. Pure mono-crystal silver conductors in miniature format. Providing precious metal in its most pure version, lifting the musical performance to a higher level.

Το Model 8 δεν είναι απλώς ένα πικάπ – είναι ένα αριστούργημα μηχανολογίας. Με αύξηση μάζας κατά 40% σε σχέση με τη σειρά Model 6, προσφέρει εξαιρετική σταθερότητα και έλεγχο συντονισμών, ξεχωρίζοντας στην κατηγορία του. Κάθε στοιχείο του Model 8 αντικατοπτρίζει τη σταθερή αφοσίωση της SME στην απόδοση και τον σχεδιασμό.

Το πρώτο πικ-απ της Musical Fidelity είναι το Round Table. Είναι ένα υψηλής ποιότητας και πιστότητας ολοκληρωμένο πικ-απ και ταυτόχρονα ανταγωνιστικό σε τιμή μοντέλο με βάση τα στάνταρ της παγκόσμιας αγοράς.Έχει γίνει μεγάλη προσπάθεια για να διασφαλιστεί ότι, για πρώτη φορά σε κατασκευή πικ-απ, όλα τα καταστρώματά του, ένα προς ένα, έχουν σχεδιαστεί και τοποθετηθεί με τέτοιο τρόπο ώστε το προϊόν να είναι τέλεια ισοσταθμισμένο και το κέντρο βάρους του να βρίσκεται με ακρίβεια στο σημείο περιστροφής του κεντρικού εδράνου.Το Round Table έχει κατασκευαστεί με υλικά άριστης ποιότητας για εξαιρετικά μεγάλη διάρκεια ζωής και συνεχούς αναπαραγωγής σε υψηλές επιδόσεις, καθώς το σύστημα ανάρτησης και ο πολύ υψηλής ποιότητας βραχίονας του, χρησιμοποιούνται συνήθως σε αντίστοιχης κατηγορίας προϊόντα υψηλότερης τιμής.

Το πρώτο πικ-απ της Musical Fidelity είναι το Round Table. Είναι ένα υψηλής ποιότητας και πιστότητας ολοκληρωμένο πικ-απ και ταυτόχρονα ανταγωνιστικό σε τιμή μοντέλο με βάση τα στάνταρ της παγκόσμιας αγοράς.Έχει γίνει μεγάλη προσπάθεια για να διασφαλιστεί ότι, για πρώτη φορά σε κατασκευή πικ-απ, όλα τα καταστρώματά του, ένα προς ένα, έχουν σχεδιαστεί και τοποθετηθεί με τέτοιο τρόπο ώστε το προϊόν να είναι τέλεια ισοσταθμισμένο και το κέντρο βάρους του να βρίσκεται με ακρίβεια στο σημείο περιστροφής του κεντρικού εδράνου.Το Round Table έχει κατασκευαστεί με υλικά άριστης ποιότητας για εξαιρετικά μεγάλη διάρκεια ζωής και συνεχούς αναπαραγωγής σε υψηλές επιδόσεις, καθώς το σύστημα ανάρτησης και ο πολύ υψηλής ποιότητας βραχίονας του, χρησιμοποιούνται συνήθως σε αντίστοιχης κατηγορίας προϊόντα υψηλότερης τιμής.

Rega Special: το Planar 3 χωρίς συμβιβασμούςΤο Planar 3 RS Edition (Rega Special) είναι η αναβαθμισμένη έκδοση του πιο γνωστού πικάπ της Rega. Διατηρεί τις διαστάσεις και τη λιτή φιλοσοφία του Planar 3, αλλά παίρνει λύσεις που μέχρι πρόσφατα έβρισκες μόνο στα Planar 6, 8 και 10: πλίνθο από HPL laminate με επιφάνεια βουρτσισμένου αλουμινίου, ξεχωριστό τροφοδοτικό Neo PSU MK2, ιμάντα Reference EBLT και εργοστασιακά τοποθετημένη κεφαλή Nd5. Κατασκευάζεται χειροποίητα στην Αγγλία.Σχεδιασμός και φινίρισμαΗ σκούρα μεταλλική επιφάνεια βουρτσισμένου αλουμινίου πλαισιώνεται από γυαλιστερό μαύρο τελείωμα στις άκρες και δίνει στο RS μια πιο premium εμφάνιση από το κλασικό Planar 3. Το καπάκι σκόνης είναι φιμέ, ενώ ο πλατός δίσκος από float glass Optiwhite πάχους 12 mm με γυαλισμένο χείλος λειτουργεί ως σφόνδυλος για σταθερή περιστροφή. Ο κεντρικός άξονας χρησιμοποιεί ορειχάλκινο έδρανο πατενταρισμένου σχεδιασμού με βελτιωμένη εφαρμογή.Έτοιμο να παίξειΒραχίονας και κεφαλή έρχονται ήδη ρυθμισμένα από το εργοστάσιο, οπότε η εγκατάσταση περιορίζεται σε λίγα λεπτά. Χρειάζεται προενισχυτής phono MM ή ενισχυτής με είσοδο MM, όπως οι Rega Fono MM MK5, Elex MK4 ή Elicit MK5. Το Planar 3 RS έχει αποσπάσει, μεταξύ άλλων, τον τίτλο Product of the Year 2025 από το What Hi-Fi?.

Our turntables demand conscious music listening. The Debut PRO S takes this philosophy to the extreme. We finished all parts except for the polished spindle in matte black. The manual controls invite the listener to interact with the turntable: turn it on, place the record on the platter, move and lower the tonearm. The musical reward follows the tactile experience. No unnecessary switches, LEDs, or labeling distract from what is essential.A milestone for the next decadesThe Debut PRO S brings an absolutely new design to Pro-Ject turntables. The audiophile turntable is convincing in all respects – not only visually, but more importantly also in terms of sound. The precision CNC milled parts are optically perfectly coordinated and lead the Debut PRO S to its modern simple, elegant and unprecedented design. By loading the video, you agree to YouTube’s privacy policy.Deeply drivenThe electronically regulated synchronous motor drives the platter and guarantees the most accurate and stable speeds. Change between them easily with the toggle switch. With the supplied round belt for 78 rpm you can also listen to your shellac records.A new platter – a deeper dishThe die-cast aluminium platter is reworked and precision balanced in an extra step to obtain an evenly spinning platter. It is anti-magnetic, allowing also MC cartridges to work properly.The anti-magnetic heavy aluminium platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and minimizes wow and flutter. The included Record Puck E provides an extra level of damping and stability.Azimuth & VTA AdjustmentThe newly designed tonearm base allows you to adjust both the azimuth and the vertical tracking angle (VTA). The tonearm height can be continuously adjusted by loosening the two grub screws. These settings give you the option of adapting the tonearm to height changes allowing the use of different turntable mats or other cartridges to always achieve the best sound quality. Setting and experimenting with the VTA & Azimuth is crucial in extracting every last bit of performance out of your cartridges.PRO FeaturesPick it S2 C - Unheard precision & dynamicsThe perfect combination of components is the key to achieve the great sound of the Pick it PRO S.Alu Sub-Platter - Sustainable componentsThe diamond cut aluminium sub-platter can be machined to much improved and higher tolerances and will be a substantial upgrade to regular sub-platters.10" S-Shape - New tonearm designThis super stiff and uniquely dampened aluminium tonearm ensures perfect tracking of the record groove.VTA & Azimuth - Fully adjustableThe Debut PRO S comes with fully adjustable Azimuth & VTA. It offers you the possibility to modify your turntable as you want it.33/45/78 RPM - High precision motor controlThe playback speeds are electronically controlled with precision, which guarantees the most accurate and stable music reproduction. Change between speeds easily with the toggle switch.Bearing block - Complete new designThe precision CNC milled tonearm bearing parts are completely new and designed just for the PRO.Special Platter - TPE damped & anti magneticThe heavy aluminium platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and minimizes wow and flutter.Metal Feet - Damped & height adjustableThe three height adjustable damped aluminium feet guarantee the perfect stand & massively reduce risk of acoustical feedback.

The Debut EVO 2 focuses on the core aspects that make a turntable sound great. Technically correct design – expert craftsmanship – handmade in the EU.This turntable is built to last you a lifetime!The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It doesn‘t only complement the lightweight tonearm sound-wise, it also looks stunning on the turntable. Our phono specialists again teamed up with the cartridge experts at Ortofon from Denmark to work on this new cartridge. The cartridge is made from a unique combination of technologies. One of which is Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which is comparable to MC cartridges.The gold plated RCA sockets on the Debut EVO 2 will always provide the best connection. The included high Connect it Phono E RCA uses quality core materials like a copper conductor for a signal transmission without losses. This cable is a semi-symmetrical type, which means that the shielding is only connected on one end. Therefore, the yellow marked side should always be connected to the receiving end.Due to the RCA output sockets you can always change and upgrade the phono cable. This allows you to upgrade the Debut EVO 2 to our True Balanced technology. To use our True Balanced Connection, your Debut EVO 2 needs to be equipped with an MC cartridge or Pick it PRO Balanced.TPE damped & anti -magnetic - The heavy aluminium platter uses a TPE ring inside to dampen unwanted resonances.Bearing Block - The massive precise CNC milled alu tonearm bearing block absorbs all unwanted resonances coming from the cartridge.Pick it MM EVO - Lively and robust sound - The new Pick it MM EVO cartridge tops off the new Debut EVO 2.Counterweight - We have added a TPE damping ring to the counterweight as on our high-end players.Adaptive skating force - As the skating force varies between the inner and outer grooves of the vinyl record, our anti-skating mechanism adjusts accordingly.Carbon fiber - Super stiff and lightweight - The new Debut EVO 2 features the a 8,6‘‘ one piece carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.Premium Bearing - Smooth movement- The precise CNC milled aluminium bearing offers very low friction and best stability.Quality Motor - Sophisticated suspension- Our high quality AC motor is mounted into a porper suspension system which consistently reduces vibrations.Clean Power - DC/AC power generator- The power generator creates a completely clean new sine wave for the motor. This guarantees very clean power which results in enhanced speed stability.Belt Drive - Precision belt - The belt decouples the motor from the big sub platter. This prevents motor vibrations to travel to the needle.33 / 45 RPM - Electronic speed change - The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.The heavy 1,7 kg die-cast aluminum platter gets reworked and precision balanced in an extra step to obtain a perfect platter. The heavy aluminum platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and thus minimize wow and flutter. The Debut EVO 2 platter is anti-magnetic, which allows you to use MC cartridges and upgrade to our True Balanced Connection technology. Our separately available Record Puck E provides an extra level of damping and stability, so it is the perfect add-on for your Debut EVO 2.The platter features a notch for the record label and together with our Record Puck E (available separately) the puck’s weight will press your record tightly against the platter.

The Debut EVO 2 focuses on the core aspects that make a turntable sound great. Technically correct design – expert craftsmanship – handmade in the EU.This turntable is built to last you a lifetime!The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It doesn‘t only complement the lightweight tonearm sound-wise, it also looks stunning on the turntable. Our phono specialists again teamed up with the cartridge experts at Ortofon from Denmark to work on this new cartridge. The cartridge is made from a unique combination of technologies. One of which is Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which is comparable to MC cartridges.The gold plated RCA sockets on the Debut EVO 2 will always provide the best connection. The included high Connect it Phono E RCA uses quality core materials like a copper conductor for a signal transmission without losses. This cable is a semi-symmetrical type, which means that the shielding is only connected on one end. Therefore, the yellow marked side should always be connected to the receiving end.Due to the RCA output sockets you can always change and upgrade the phono cable. This allows you to upgrade the Debut EVO 2 to our True Balanced technology. To use our True Balanced Connection, your Debut EVO 2 needs to be equipped with an MC cartridge or Pick it PRO Balanced.TPE damped & anti -magnetic - The heavy aluminium platter uses a TPE ring inside to dampen unwanted resonances.Bearing Block - The massive precise CNC milled alu tonearm bearing block absorbs all unwanted resonances coming from the cartridge.Pick it MM EVO - Lively and robust sound - The new Pick it MM EVO cartridge tops off the new Debut EVO 2.Counterweight - We have added a TPE damping ring to the counterweight as on our high-end players.Adaptive skating force - As the skating force varies between the inner and outer grooves of the vinyl record, our anti-skating mechanism adjusts accordingly.Carbon fiber - Super stiff and lightweight - The new Debut EVO 2 features the a 8,6‘‘ one piece carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.Premium Bearing - Smooth movement- The precise CNC milled aluminium bearing offers very low friction and best stability.Quality Motor - Sophisticated suspension- Our high quality AC motor is mounted into a porper suspension system which consistently reduces vibrations.Clean Power - DC/AC power generator- The power generator creates a completely clean new sine wave for the motor. This guarantees very clean power which results in enhanced speed stability.Belt Drive - Precision belt - The belt decouples the motor from the big sub platter. This prevents motor vibrations to travel to the needle.33 / 45 RPM - Electronic speed change - The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.The heavy 1,7 kg die-cast aluminum platter gets reworked and precision balanced in an extra step to obtain a perfect platter. The heavy aluminum platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and thus minimize wow and flutter. The Debut EVO 2 platter is anti-magnetic, which allows you to use MC cartridges and upgrade to our True Balanced Connection technology. Our separately available Record Puck E provides an extra level of damping and stability, so it is the perfect add-on for your Debut EVO 2.The platter features a notch for the record label and together with our Record Puck E (available separately) the puck’s weight will press your record tightly against the platter.

The Debut EVO 2 focuses on the core aspects that make a turntable sound great. Technically correct design – expert craftsmanship – handmade in the EU.This turntable is built to last you a lifetime!The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It doesn‘t only complement the lightweight tonearm sound-wise, it also looks stunning on the turntable. Our phono specialists again teamed up with the cartridge experts at Ortofon from Denmark to work on this new cartridge. The cartridge is made from a unique combination of technologies. One of which is Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which is comparable to MC cartridges.The gold plated RCA sockets on the Debut EVO 2 will always provide the best connection. The included high Connect it Phono E RCA uses quality core materials like a copper conductor for a signal transmission without losses. This cable is a semi-symmetrical type, which means that the shielding is only connected on one end. Therefore, the yellow marked side should always be connected to the receiving end.Due to the RCA output sockets you can always change and upgrade the phono cable. This allows you to upgrade the Debut EVO 2 to our True Balanced technology. To use our True Balanced Connection, your Debut EVO 2 needs to be equipped with an MC cartridge or Pick it PRO Balanced.TPE damped & anti -magnetic - The heavy aluminium platter uses a TPE ring inside to dampen unwanted resonances.Bearing Block - The massive precise CNC milled alu tonearm bearing block absorbs all unwanted resonances coming from the cartridge.Pick it MM EVO - Lively and robust sound - The new Pick it MM EVO cartridge tops off the new Debut EVO 2.Counterweight - We have added a TPE damping ring to the counterweight as on our high-end players.Adaptive skating force - As the skating force varies between the inner and outer grooves of the vinyl record, our anti-skating mechanism adjusts accordingly.Carbon fiber - Super stiff and lightweight - The new Debut EVO 2 features the a 8,6‘‘ one piece carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.Premium Bearing - Smooth movement- The precise CNC milled aluminium bearing offers very low friction and best stability.Quality Motor - Sophisticated suspension- Our high quality AC motor is mounted into a porper suspension system which consistently reduces vibrations.Clean Power - DC/AC power generator- The power generator creates a completely clean new sine wave for the motor. This guarantees very clean power which results in enhanced speed stability.Belt Drive - Precision belt - The belt decouples the motor from the big sub platter. This prevents motor vibrations to travel to the needle.33 / 45 RPM - Electronic speed change - The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.The heavy 1,7 kg die-cast aluminum platter gets reworked and precision balanced in an extra step to obtain a perfect platter. The heavy aluminum platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and thus minimize wow and flutter. The Debut EVO 2 platter is anti-magnetic, which allows you to use MC cartridges and upgrade to our True Balanced Connection technology. Our separately available Record Puck E provides an extra level of damping and stability, so it is the perfect add-on for your Debut EVO 2.The platter features a notch for the record label and together with our Record Puck E (available separately) the puck’s weight will press your record tightly against the platter.

The Debut EVO 2 focuses on the core aspects that make a turntable sound great. Technically correct design – expert craftsmanship – handmade in the EU.This turntable is built to last you a lifetime!The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It doesn‘t only complement the lightweight tonearm sound-wise, it also looks stunning on the turntable. Our phono specialists again teamed up with the cartridge experts at Ortofon from Denmark to work on this new cartridge. The cartridge is made from a unique combination of technologies. One of which is Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which is comparable to MC cartridges.The gold plated RCA sockets on the Debut EVO 2 will always provide the best connection. The included high Connect it Phono E RCA uses quality core materials like a copper conductor for a signal transmission without losses. This cable is a semi-symmetrical type, which means that the shielding is only connected on one end. Therefore, the yellow marked side should always be connected to the receiving end.Due to the RCA output sockets you can always change and upgrade the phono cable. This allows you to upgrade the Debut EVO 2 to our True Balanced technology. To use our True Balanced Connection, your Debut EVO 2 needs to be equipped with an MC cartridge or Pick it PRO Balanced.TPE damped & anti -magnetic - The heavy aluminium platter uses a TPE ring inside to dampen unwanted resonances.Bearing Block - The massive precise CNC milled alu tonearm bearing block absorbs all unwanted resonances coming from the cartridge.Pick it MM EVO - Lively and robust sound - The new Pick it MM EVO cartridge tops off the new Debut EVO 2.Counterweight - We have added a TPE damping ring to the counterweight as on our high-end players.Adaptive skating force - As the skating force varies between the inner and outer grooves of the vinyl record, our anti-skating mechanism adjusts accordingly.Carbon fiber - Super stiff and lightweight - The new Debut EVO 2 features the a 8,6‘‘ one piece carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.Premium Bearing - Smooth movement- The precise CNC milled aluminium bearing offers very low friction and best stability.Quality Motor - Sophisticated suspension- Our high quality AC motor is mounted into a porper suspension system which consistently reduces vibrations.Clean Power - DC/AC power generator- The power generator creates a completely clean new sine wave for the motor. This guarantees very clean power which results in enhanced speed stability.Belt Drive - Precision belt - The belt decouples the motor from the big sub platter. This prevents motor vibrations to travel to the needle.33 / 45 RPM - Electronic speed change - The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.The heavy 1,7 kg die-cast aluminum platter gets reworked and precision balanced in an extra step to obtain a perfect platter. The heavy aluminum platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and thus minimize wow and flutter. The Debut EVO 2 platter is anti-magnetic, which allows you to use MC cartridges and upgrade to our True Balanced Connection technology. Our separately available Record Puck E provides an extra level of damping and stability, so it is the perfect add-on for your Debut EVO 2.The platter features a notch for the record label and together with our Record Puck E (available separately) the puck’s weight will press your record tightly against the platter.

The Debut EVO 2 focuses on the core aspects that make a turntable sound great. Technically correct design – expert craftsmanship – handmade in the EU.This turntable is built to last you a lifetime!The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It doesn‘t only complement the lightweight tonearm sound-wise, it also looks stunning on the turntable. Our phono specialists again teamed up with the cartridge experts at Ortofon from Denmark to work on this new cartridge. The cartridge is made from a unique combination of technologies. One of which is Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which is comparable to MC cartridges.The gold plated RCA sockets on the Debut EVO 2 will always provide the best connection. The included high Connect it Phono E RCA uses quality core materials like a copper conductor for a signal transmission without losses. This cable is a semi-symmetrical type, which means that the shielding is only connected on one end. Therefore, the yellow marked side should always be connected to the receiving end.Due to the RCA output sockets you can always change and upgrade the phono cable. This allows you to upgrade the Debut EVO 2 to our True Balanced technology. To use our True Balanced Connection, your Debut EVO 2 needs to be equipped with an MC cartridge or Pick it PRO Balanced.TPE damped & anti -magnetic - The heavy aluminium platter uses a TPE ring inside to dampen unwanted resonances.Bearing Block - The massive precise CNC milled alu tonearm bearing block absorbs all unwanted resonances coming from the cartridge.Pick it MM EVO - Lively and robust sound - The new Pick it MM EVO cartridge tops off the new Debut EVO 2.Counterweight - We have added a TPE damping ring to the counterweight as on our high-end players.Adaptive skating force - As the skating force varies between the inner and outer grooves of the vinyl record, our anti-skating mechanism adjusts accordingly.Carbon fiber - Super stiff and lightweight - The new Debut EVO 2 features the a 8,6‘‘ one piece carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.Premium Bearing - Smooth movement- The precise CNC milled aluminium bearing offers very low friction and best stability.Quality Motor - Sophisticated suspension- Our high quality AC motor is mounted into a porper suspension system which consistently reduces vibrations.Clean Power - DC/AC power generator- The power generator creates a completely clean new sine wave for the motor. This guarantees very clean power which results in enhanced speed stability.Belt Drive - Precision belt - The belt decouples the motor from the big sub platter. This prevents motor vibrations to travel to the needle.33 / 45 RPM - Electronic speed change - The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.The heavy 1,7 kg die-cast aluminum platter gets reworked and precision balanced in an extra step to obtain a perfect platter. The heavy aluminum platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and thus minimize wow and flutter. The Debut EVO 2 platter is anti-magnetic, which allows you to use MC cartridges and upgrade to our True Balanced Connection technology. Our separately available Record Puck E provides an extra level of damping and stability, so it is the perfect add-on for your Debut EVO 2.The platter features a notch for the record label and together with our Record Puck E (available separately) the puck’s weight will press your record tightly against the platter.

The Debut EVO 2 focuses on the core aspects that make a turntable sound great. Technically correct design – expert craftsmanship – handmade in the EU.This turntable is built to last you a lifetime!The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It doesn‘t only complement the lightweight tonearm sound-wise, it also looks stunning on the turntable. Our phono specialists again teamed up with the cartridge experts at Ortofon from Denmark to work on this new cartridge. The cartridge is made from a unique combination of technologies. One of which is Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which is comparable to MC cartridges.The gold plated RCA sockets on the Debut EVO 2 will always provide the best connection. The included high Connect it Phono E RCA uses quality core materials like a copper conductor for a signal transmission without losses. This cable is a semi-symmetrical type, which means that the shielding is only connected on one end. Therefore, the yellow marked side should always be connected to the receiving end.Due to the RCA output sockets you can always change and upgrade the phono cable. This allows you to upgrade the Debut EVO 2 to our True Balanced technology. To use our True Balanced Connection, your Debut EVO 2 needs to be equipped with an MC cartridge or Pick it PRO Balanced.TPE damped & anti -magnetic - The heavy aluminium platter uses a TPE ring inside to dampen unwanted resonances.Bearing Block - The massive precise CNC milled alu tonearm bearing block absorbs all unwanted resonances coming from the cartridge.Pick it MM EVO - Lively and robust sound - The new Pick it MM EVO cartridge tops off the new Debut EVO 2.Counterweight - We have added a TPE damping ring to the counterweight as on our high-end players.Adaptive skating force - As the skating force varies between the inner and outer grooves of the vinyl record, our anti-skating mechanism adjusts accordingly.Carbon fiber - Super stiff and lightweight - The new Debut EVO 2 features the a 8,6‘‘ one piece carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.Premium Bearing - Smooth movement- The precise CNC milled aluminium bearing offers very low friction and best stability.Quality Motor - Sophisticated suspension- Our high quality AC motor is mounted into a porper suspension system which consistently reduces vibrations.Clean Power - DC/AC power generator- The power generator creates a completely clean new sine wave for the motor. This guarantees very clean power which results in enhanced speed stability.Belt Drive - Precision belt - The belt decouples the motor from the big sub platter. This prevents motor vibrations to travel to the needle.33 / 45 RPM - Electronic speed change - The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.The heavy 1,7 kg die-cast aluminum platter gets reworked and precision balanced in an extra step to obtain a perfect platter. The heavy aluminum platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and thus minimize wow and flutter. The Debut EVO 2 platter is anti-magnetic, which allows you to use MC cartridges and upgrade to our True Balanced Connection technology. Our separately available Record Puck E provides an extra level of damping and stability, so it is the perfect add-on for your Debut EVO 2.The platter features a notch for the record label and together with our Record Puck E (available separately) the puck’s weight will press your record tightly against the platter.

The Debut EVO 2 focuses on the core aspects that make a turntable sound great. Technically correct design – expert craftsmanship – handmade in the EU.This turntable is built to last you a lifetime!The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It doesn‘t only complement the lightweight tonearm sound-wise, it also looks stunning on the turntable. Our phono specialists again teamed up with the cartridge experts at Ortofon from Denmark to work on this new cartridge. The cartridge is made from a unique combination of technologies. One of which is Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which is comparable to MC cartridges.The gold plated RCA sockets on the Debut EVO 2 will always provide the best connection. The included high Connect it Phono E RCA uses quality core materials like a copper conductor for a signal transmission without losses. This cable is a semi-symmetrical type, which means that the shielding is only connected on one end. Therefore, the yellow marked side should always be connected to the receiving end.Due to the RCA output sockets you can always change and upgrade the phono cable. This allows you to upgrade the Debut EVO 2 to our True Balanced technology. To use our True Balanced Connection, your Debut EVO 2 needs to be equipped with an MC cartridge or Pick it PRO Balanced.TPE damped & anti -magnetic - The heavy aluminium platter uses a TPE ring inside to dampen unwanted resonances.Bearing Block - The massive precise CNC milled alu tonearm bearing block absorbs all unwanted resonances coming from the cartridge.Pick it MM EVO - Lively and robust sound - The new Pick it MM EVO cartridge tops off the new Debut EVO 2.Counterweight - We have added a TPE damping ring to the counterweight as on our high-end players.Adaptive skating force - As the skating force varies between the inner and outer grooves of the vinyl record, our anti-skating mechanism adjusts accordingly.Carbon fiber - Super stiff and lightweight - The new Debut EVO 2 features the a 8,6‘‘ one piece carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.Premium Bearing - Smooth movement- The precise CNC milled aluminium bearing offers very low friction and best stability.Quality Motor - Sophisticated suspension- Our high quality AC motor is mounted into a porper suspension system which consistently reduces vibrations.Clean Power - DC/AC power generator- The power generator creates a completely clean new sine wave for the motor. This guarantees very clean power which results in enhanced speed stability.Belt Drive - Precision belt - The belt decouples the motor from the big sub platter. This prevents motor vibrations to travel to the needle.33 / 45 RPM - Electronic speed change - The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.The heavy 1,7 kg die-cast aluminum platter gets reworked and precision balanced in an extra step to obtain a perfect platter. The heavy aluminum platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and thus minimize wow and flutter. The Debut EVO 2 platter is anti-magnetic, which allows you to use MC cartridges and upgrade to our True Balanced Connection technology. Our separately available Record Puck E provides an extra level of damping and stability, so it is the perfect add-on for your Debut EVO 2.The platter features a notch for the record label and together with our Record Puck E (available separately) the puck’s weight will press your record tightly against the platter.

The Debut EVO 2 focuses on the core aspects that make a turntable sound great. Technically correct design – expert craftsmanship – handmade in the EU.This turntable is built to last you a lifetime!The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It doesn‘t only complement the lightweight tonearm sound-wise, it also looks stunning on the turntable. Our phono specialists again teamed up with the cartridge experts at Ortofon from Denmark to work on this new cartridge. The cartridge is made from a unique combination of technologies. One of which is Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which is comparable to MC cartridges.The gold plated RCA sockets on the Debut EVO 2 will always provide the best connection. The included high Connect it Phono E RCA uses quality core materials like a copper conductor for a signal transmission without losses. This cable is a semi-symmetrical type, which means that the shielding is only connected on one end. Therefore, the yellow marked side should always be connected to the receiving end.Due to the RCA output sockets you can always change and upgrade the phono cable. This allows you to upgrade the Debut EVO 2 to our True Balanced technology. To use our True Balanced Connection, your Debut EVO 2 needs to be equipped with an MC cartridge or Pick it PRO Balanced.TPE damped & anti -magnetic - The heavy aluminium platter uses a TPE ring inside to dampen unwanted resonances.Bearing Block - The massive precise CNC milled alu tonearm bearing block absorbs all unwanted resonances coming from the cartridge.Pick it MM EVO - Lively and robust sound - The new Pick it MM EVO cartridge tops off the new Debut EVO 2.Counterweight - We have added a TPE damping ring to the counterweight as on our high-end players.Adaptive skating force - As the skating force varies between the inner and outer grooves of the vinyl record, our anti-skating mechanism adjusts accordingly.Carbon fiber - Super stiff and lightweight - The new Debut EVO 2 features the a 8,6‘‘ one piece carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.Premium Bearing - Smooth movement- The precise CNC milled aluminium bearing offers very low friction and best stability.Quality Motor - Sophisticated suspension- Our high quality AC motor is mounted into a porper suspension system which consistently reduces vibrations.Clean Power - DC/AC power generator- The power generator creates a completely clean new sine wave for the motor. This guarantees very clean power which results in enhanced speed stability.Belt Drive - Precision belt - The belt decouples the motor from the big sub platter. This prevents motor vibrations to travel to the needle.33 / 45 RPM - Electronic speed change - The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.The heavy 1,7 kg die-cast aluminum platter gets reworked and precision balanced in an extra step to obtain a perfect platter. The heavy aluminum platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and thus minimize wow and flutter. The Debut EVO 2 platter is anti-magnetic, which allows you to use MC cartridges and upgrade to our True Balanced Connection technology. Our separately available Record Puck E provides an extra level of damping and stability, so it is the perfect add-on for your Debut EVO 2.The platter features a notch for the record label and together with our Record Puck E (available separately) the puck’s weight will press your record tightly against the platter.

The Debut EVO 2 focuses on the core aspects that make a turntable sound great. Technically correct design – expert craftsmanship – handmade in the EU.This turntable is built to last you a lifetime!The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It doesn‘t only complement the lightweight tonearm sound-wise, it also looks stunning on the turntable. Our phono specialists again teamed up with the cartridge experts at Ortofon from Denmark to work on this new cartridge. The cartridge is made from a unique combination of technologies. One of which is Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which is comparable to MC cartridges.The gold plated RCA sockets on the Debut EVO 2 will always provide the best connection. The included high Connect it Phono E RCA uses quality core materials like a copper conductor for a signal transmission without losses. This cable is a semi-symmetrical type, which means that the shielding is only connected on one end. Therefore, the yellow marked side should always be connected to the receiving end.Due to the RCA output sockets you can always change and upgrade the phono cable. This allows you to upgrade the Debut EVO 2 to our True Balanced technology. To use our True Balanced Connection, your Debut EVO 2 needs to be equipped with an MC cartridge or Pick it PRO Balanced.TPE damped & anti -magnetic - The heavy aluminium platter uses a TPE ring inside to dampen unwanted resonances.Bearing Block - The massive precise CNC milled alu tonearm bearing block absorbs all unwanted resonances coming from the cartridge.Pick it MM EVO - Lively and robust sound - The new Pick it MM EVO cartridge tops off the new Debut EVO 2.Counterweight - We have added a TPE damping ring to the counterweight as on our high-end players.Adaptive skating force - As the skating force varies between the inner and outer grooves of the vinyl record, our anti-skating mechanism adjusts accordingly.Carbon fiber - Super stiff and lightweight - The new Debut EVO 2 features the a 8,6‘‘ one piece carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.Premium Bearing - Smooth movement- The precise CNC milled aluminium bearing offers very low friction and best stability.Quality Motor - Sophisticated suspension- Our high quality AC motor is mounted into a porper suspension system which consistently reduces vibrations.Clean Power - DC/AC power generator- The power generator creates a completely clean new sine wave for the motor. This guarantees very clean power which results in enhanced speed stability.Belt Drive - Precision belt - The belt decouples the motor from the big sub platter. This prevents motor vibrations to travel to the needle.33 / 45 RPM - Electronic speed change - The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.The heavy 1,7 kg die-cast aluminum platter gets reworked and precision balanced in an extra step to obtain a perfect platter. The heavy aluminum platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and thus minimize wow and flutter. The Debut EVO 2 platter is anti-magnetic, which allows you to use MC cartridges and upgrade to our True Balanced Connection technology. Our separately available Record Puck E provides an extra level of damping and stability, so it is the perfect add-on for your Debut EVO 2.The platter features a notch for the record label and together with our Record Puck E (available separately) the puck’s weight will press your record tightly against the platter.

The Debut EVO 2 focuses on the core aspects that make a turntable sound great. Technically correct design – expert craftsmanship – handmade in the EU.This turntable is built to last you a lifetime!The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It doesn‘t only complement the lightweight tonearm sound-wise, it also looks stunning on the turntable. Our phono specialists again teamed up with the cartridge experts at Ortofon from Denmark to work on this new cartridge. The cartridge is made from a unique combination of technologies. One of which is Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which is comparable to MC cartridges.The gold plated RCA sockets on the Debut EVO 2 will always provide the best connection. The included high Connect it Phono E RCA uses quality core materials like a copper conductor for a signal transmission without losses. This cable is a semi-symmetrical type, which means that the shielding is only connected on one end. Therefore, the yellow marked side should always be connected to the receiving end.Due to the RCA output sockets you can always change and upgrade the phono cable. This allows you to upgrade the Debut EVO 2 to our True Balanced technology. To use our True Balanced Connection, your Debut EVO 2 needs to be equipped with an MC cartridge or Pick it PRO Balanced.TPE damped & anti -magnetic - The heavy aluminium platter uses a TPE ring inside to dampen unwanted resonances.Bearing Block - The massive precise CNC milled alu tonearm bearing block absorbs all unwanted resonances coming from the cartridge.Pick it MM EVO - Lively and robust sound - The new Pick it MM EVO cartridge tops off the new Debut EVO 2.Counterweight - We have added a TPE damping ring to the counterweight as on our high-end players.Adaptive skating force - As the skating force varies between the inner and outer grooves of the vinyl record, our anti-skating mechanism adjusts accordingly.Carbon fiber - Super stiff and lightweight - The new Debut EVO 2 features the a 8,6‘‘ one piece carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.Premium Bearing - Smooth movement- The precise CNC milled aluminium bearing offers very low friction and best stability.Quality Motor - Sophisticated suspension- Our high quality AC motor is mounted into a porper suspension system which consistently reduces vibrations.Clean Power - DC/AC power generator- The power generator creates a completely clean new sine wave for the motor. This guarantees very clean power which results in enhanced speed stability.Belt Drive - Precision belt - The belt decouples the motor from the big sub platter. This prevents motor vibrations to travel to the needle.33 / 45 RPM - Electronic speed change - The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.The heavy 1,7 kg die-cast aluminum platter gets reworked and precision balanced in an extra step to obtain a perfect platter. The heavy aluminum platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and thus minimize wow and flutter. The Debut EVO 2 platter is anti-magnetic, which allows you to use MC cartridges and upgrade to our True Balanced Connection technology. Our separately available Record Puck E provides an extra level of damping and stability, so it is the perfect add-on for your Debut EVO 2.The platter features a notch for the record label and together with our Record Puck E (available separately) the puck’s weight will press your record tightly against the platter.

Employing an ultra-stable, direct-drive motor, a classically designed turntable with knife-edge tonearm bearingsThe TN-4D-SE is a direct-drive, analog turntable with an elegant, low-profile design, made possible by the use of a newly-developed brushless DC servo motor.Its brushless DC motor (with feedback control system) achieves crystal-locked speed stability and smoother rotation while also eliminating cogging*. This low-profile motor allowed us to design a plinth that’s extraordinarily sleek and stylish compared to that of most other direct drive turntables. The new tonearm employs knife-edge, pivot-point bearings, developed in collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer. The result is an insightful, high-resolution sound quality that tonearms with conventional bearings can’t match. Partnering it is a carefully designed PHONO EQ amplifier that allows you to directly connect the turntable to the line-level inputs of your existing hi-fi system. A high quality NJM8080 op-amp, specially designed for hi-fi applications by New Japan Radio Corporation, is employed to convey the finest of musical detail.To extract the music from your vinyl, the TN-4D-SE comes with a highly-regarded Oyster MM cartridge from SUMIKO – a legendary American cartridge manufacturer. Noted for its innate musicality, the cartridge comes pre-installed on the headshell at the factory, allowing near ‘plug and play’ operation. The S-shaped tonearm meanwhile allows for quick cartridge/headshell swaps, so users can alter the sound quality by experimenting with different cartridges, if the desire takes them.The TN-4D-SE is an analog turntable that achieves highly accurate rotational speeds and is very distinctive, for a direct-drive design, thanks to its sleek and stylish aesthetics.Features at a glanceDirect-drive analog turntableCrystal-locked speed stability, thanks to a new brushless DC motor with feedback controlDie-cast aluminium platterKnife-edge, pivot-point tonearm base, designed by high-end tonearm manufacturer SAECMulti-layer piano black or natural walnut veneer finishBuilt-in PHONO EQ amplifier for high-quality sound (PHONO/LINE switchable)Audiophile-grade NJM8080 op-amp used in PHONO EQ stage2-speed drive offering 33-? and 45 rpmGold-plated oxidation-resistant output connectorsOyster MM cartridge by SUMIKOShock-absorbing insulating feetGND terminalRoHS compliantA sleek motor, developed exclusively for direct-drive turntablesThe TN-4D-SE uses a sleek, brushless DC motor, offering crystal-locked speed accuracy, regulated by a computer-controlled feedback circuit and achieving low wow-and-flutter levels for a direct drive turntable, especially one with such a stylish, low-profile design.Knife-edge, pivot-point tone-arm bearingsTN-4D-SEIn collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer, the TN-4D-SE's tonearm employs a knife-edge, pivot-point bearing. Unlike the case for tonearms with conventional bearings, any fine vertical movements encountered by this tonearm actually help in delivering a more dynamic sound with excellent resolution. The S-shaped tonearm also employs a universal headshell fitting, allowing users to quickly and easily swap cartridges/headshells, and supports a wide range of cartridge weights (from 14 - 23g / 0.5 - 0.8 oz.)Precision anti-skating and stylus-pressure adjustmentAs you might expect, the tonearm is equipped with a counterweight, for precise stylus-pressure adjustment, and an anti-skating mechanism.Pre-installed Oyster cartridge by SUMIKOThe TN-4D-SE comes with a well-regarded Oyster MM cartridge from SUMIKO – a legendary American cartridge manufacturer. Regardless of the type of music, the Oyster cartridge delivers a powerful but insightful performance.Built-in PHONO EQ amplifier supporting MM cartridgesThe TN-4D-SE comes with a built-in PHONO EQ amplifier that allows you to directly connect the turntable to the line-level inputs of your existing hi-fi system. The NJM8080 IC from New Japan Radio Corporation is employed for op-amp duties, bringing up the level of the tiny signals received via the cartridge up to LINE level strength without any loss of quality.Die-cast aluminium platterIn conjunction with the newly-developed motor, the high inertia, die-cast aluminium platter helps to achieve better speed stability.Insulating feet with excellent shock absorptionThe insulating feet comprise a machined aluminium shell topped with a rubber cushion that is fixed to the high-density MDF plinth. Thanks to their excellent shock absorption characteristics the TN-4D-SE is very resistant to acoustic feedback.2-speed turntable for 33-? and 45 rpmThe TN-4D-SE supports 33-? and 45 rpm for LP and EP records. Our insistence on quality engineering can even be seen in the construction of the rotary control for start-up/speed selection, formed of machined aluminium.

Employing an ultra-stable, direct-drive motor, a classically designed turntable with knife-edge tonearm bearingsThe TN-4D-SE is a direct-drive, analog turntable with an elegant, low-profile design, made possible by the use of a newly-developed brushless DC servo motor.Its brushless DC motor (with feedback control system) achieves crystal-locked speed stability and smoother rotation while also eliminating cogging*. This low-profile motor allowed us to design a plinth that’s extraordinarily sleek and stylish compared to that of most other direct drive turntables. The new tonearm employs knife-edge, pivot-point bearings, developed in collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer. The result is an insightful, high-resolution sound quality that tonearms with conventional bearings can’t match. Partnering it is a carefully designed PHONO EQ amplifier that allows you to directly connect the turntable to the line-level inputs of your existing hi-fi system. A high quality NJM8080 op-amp, specially designed for hi-fi applications by New Japan Radio Corporation, is employed to convey the finest of musical detail.To extract the music from your vinyl, the TN-4D-SE comes with a highly-regarded Oyster MM cartridge from SUMIKO – a legendary American cartridge manufacturer. Noted for its innate musicality, the cartridge comes pre-installed on the headshell at the factory, allowing near ‘plug and play’ operation. The S-shaped tonearm meanwhile allows for quick cartridge/headshell swaps, so users can alter the sound quality by experimenting with different cartridges, if the desire takes them.The TN-4D-SE is an analog turntable that achieves highly accurate rotational speeds and is very distinctive, for a direct-drive design, thanks to its sleek and stylish aesthetics.Features at a glanceDirect-drive analog turntableCrystal-locked speed stability, thanks to a new brushless DC motor with feedback controlDie-cast aluminium platterKnife-edge, pivot-point tonearm base, designed by high-end tonearm manufacturer SAECMulti-layer piano black or natural walnut veneer finishBuilt-in PHONO EQ amplifier for high-quality sound (PHONO/LINE switchable)Audiophile-grade NJM8080 op-amp used in PHONO EQ stage2-speed drive offering 33-? and 45 rpmGold-plated oxidation-resistant output connectorsOyster MM cartridge by SUMIKOShock-absorbing insulating feetGND terminalRoHS compliantA sleek motor, developed exclusively for direct-drive turntablesThe TN-4D-SE uses a sleek, brushless DC motor, offering crystal-locked speed accuracy, regulated by a computer-controlled feedback circuit and achieving low wow-and-flutter levels for a direct drive turntable, especially one with such a stylish, low-profile design.Knife-edge, pivot-point tone-arm bearingsTN-4D-SEIn collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer, the TN-4D-SE's tonearm employs a knife-edge, pivot-point bearing. Unlike the case for tonearms with conventional bearings, any fine vertical movements encountered by this tonearm actually help in delivering a more dynamic sound with excellent resolution. The S-shaped tonearm also employs a universal headshell fitting, allowing users to quickly and easily swap cartridges/headshells, and supports a wide range of cartridge weights (from 14 - 23g / 0.5 - 0.8 oz.)Precision anti-skating and stylus-pressure adjustmentAs you might expect, the tonearm is equipped with a counterweight, for precise stylus-pressure adjustment, and an anti-skating mechanism.Pre-installed Oyster cartridge by SUMIKOThe TN-4D-SE comes with a well-regarded Oyster MM cartridge from SUMIKO – a legendary American cartridge manufacturer. Regardless of the type of music, the Oyster cartridge delivers a powerful but insightful performance.Built-in PHONO EQ amplifier supporting MM cartridgesThe TN-4D-SE comes with a built-in PHONO EQ amplifier that allows you to directly connect the turntable to the line-level inputs of your existing hi-fi system. The NJM8080 IC from New Japan Radio Corporation is employed for op-amp duties, bringing up the level of the tiny signals received via the cartridge up to LINE level strength without any loss of quality.Die-cast aluminium platterIn conjunction with the newly-developed motor, the high inertia, die-cast aluminium platter helps to achieve better speed stability.Insulating feet with excellent shock absorptionThe insulating feet comprise a machined aluminium shell topped with a rubber cushion that is fixed to the high-density MDF plinth. Thanks to their excellent shock absorption characteristics the TN-4D-SE is very resistant to acoustic feedback.2-speed turntable for 33-? and 45 rpmThe TN-4D-SE supports 33-? and 45 rpm for LP and EP records. Our insistence on quality engineering can even be seen in the construction of the rotary control for start-up/speed selection, formed of machined aluminium.

Analog turntable with Bluetooth® Qualcomm® aptX™ transmitter that streams music from LP Records wirelesslyThe TN-400BT-X is an analog turntable that also enables to playback LP records wirelessly via Bluetooth® headphones & speakers. A die-cast aluminium platter provides accurate rotational speed while an S-shaped static-balanced aluminum tone-arm provides accurate tracking. The built-in Phono EQ amplifier enables the TN-400BT-X to be connected to a conventional hi-fi audio system not having phono input.A built-in Bluetooth® transmitter codec supports Qualcomm® aptX™ Adaptive. It enables to playback LP records with high-quality audio and low-latency via Bluetooth® headphones or Bluetooth® speakers supporting the Qualcomm® aptX™ Adaptive.For convenience, a quality Japanese-made moving magnet-type cartridge comes pre-installed, so users can quickly start enjoying their records without a lengthy set-up procedure.Features at a glanceRobust high-density MDF plinth provides both vibration isolation and eleganceAvailable in a selection of contemporary matt finishes, or a natural walnut veneer3-speed belt-drive mechanism with aluminum die-cast platter (33-?, 45, 78 rpm)Low-resistance spindle for stable rotational speedStatic-balanced S-shaped tone-arm with universal-type headshellPre-installed MM-type AT95E cartridge from audio-technicaBuilt-in Phono EQ AmplifierHigh-quality Bluetooth® Qualcomm® aptX™ and Qualcomm® aptX™ Adaptive wireless audio transmissionFloating-construction using decoupled feet provides high feedback resistanceMachined aluminum operation knobs and feetGold-plated RCA jacks (for LINE/PHONO output) and tone-arm contactsGND terminal on rear panelRCA audio cable with GND wiring included     *This product does not have a USB digital output.

A new, high-performance standard for belt-drive analog turntablesThe TN-3B-SE is a stylish, sleek-looking belt-driven turntable with a built-in MM-type PHONO EQ amplifier.It employs a new tonearm with knife-edge, pivot-point bearings, collaborated with SAEC, the high-end tonearm manufacturer, for superlative stability and resolution. The belt-drive mechanism, meanwhile, helps mitigate any unwanted cogging effects (ie fine pulsing) from the operation of the motor, to ensure a precise and smooth platter rotation. The TN-3B-SE also employs a VM-type cartridge the AT-VM95E manufactured by audio-technica and a high-precision NJM8080 op-amp in its in-built Phono EQ amplifier, allowing the user to enjoy the sound of their vinyl records with low distortion and in high quality.The TN-3B-SE delivers a natural and well-balanced sound quality and is quick and easy to set up and start enjoying. We believe it sets a new standard that will satisfy the needs of both audiophiles and ardent record collectors.Features at a glanceBelt-drive mechanism2-speed turntable supporting 33-? and 45 rpmKnife-edge, pivot-point tonearm, designed by high-end tonearm manufacturer SAECAluminum die-cast platterBuilt-in PHONO EQ amplifier compatible with MM-type cartridgesHi-fi grade op-amp, NJM8080, used in PHONO EQ stageAnti-skating mechanismPHONO/LINE analog output (switchable)Gold-plated oxidation-resistant output connectorsPre-installed AT-VM95E cartridge supplied by audio-technicaRigid, high-density MDF plinth with multi-layered lacquer finishShock-absorbing insulating feetGND terminalRoHS compliantKnife-edge, pivot-point tone-arm bearingsIn collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer, the TN-3B's tone-arm employs a knife-edge, pivot-point bearing. Unlike the case for tonearms with conventional bearings, any fine vertical movements that take place in this tone-arm actually help in delivering a more dynamic sound with excellent resolution. The S-shaped tone-arm also employs a universal head-shell fitting, allowing users to quickly and easily swap cartridges/head-shells, and supports a wide range of cartridge weights (from 14 - 23g / 0.5 - 0.8 oz.)?Precision anti-skating and stylus-pressure adjustmentThe static-balanced, S-shape tone-arm is equipped with a counterweight for precise stylus-pressure adjustment, as well as an anti-skating mechanism for accurate tracking force adjustment, allowing the cartridge to accurately play any quality vinyl disc.Pre-installed VM-series cartridgeA VM-type cartridge the AT-VM95E manufactured by audio-technica exclusive for TEAC with an elliptical-shaped stylus tip comes pre-installed on the head-shell for convenience. After you’ve opened the box, set up the platter and mounted the head-shell on the tonearm, you'll be ready to enjoy your records.* Replacement styli should be available at the retail store where you purchased the unit, or via the TEAC On-line store. (TEAC On-line store is available in selected countries.)* The VM-series cartridge is a MM (Moving Magnet) type design, and is compatible with all conventional MM-type phono EQ amplifiers.Built-in MM-type phono EQ amplifierThe TN-3B-SE incorporates an MM-type phono EQ amplifier, allowing you to connect the turntable to a conventional amplifier/hi-fi system that lacks a PHONO input. A low distortion, hi-fi-grade op-amp, the NJM8080, is employed to boost the low-level signals from the phono cartridge up to LINE level.External belt-drive with aluminum die-cast platterA belt-drive arrangement is employed in order to minimise any motor cogging effects by driving the outer rim of the platter (which has a larger diameter, mass and surface area).Luxurious, multi-layer lacquer paint finishAll internal components are mounted on a robust and high-density MDF plinth for rigidity and vibration-deadening. Thanks to its sleek and stylish design, the TN-3B looks at home in most domestic environments, creating the perfect setting for listening to vinyl records.33-? and 45 rpm 2-speed turntableThe TN-3B-SE supports both 33-? and 45 rpm for LP and EP records. Our insistence on quality engineering can even be seen in the construction of the rotary control for start-up/speed selection, formed of machined aluminium.Insulating feet with excellent shock absorptionThe insulating feet comprise a machined aluminium shell, topped with a rubber cushion that is fixed to the high-density MDF plinth. Thanks to their excellent shock absorption characteristics, the TN-3B-SE is very resistant to acoustic feedback.Honeycomb patterned bottom panelIn order to achieve sleek cabinet design without compromising rigidity, the bottom panel is imprinted with a honeycomb pattern that minimises unwanted vibrations.

A new, high-performance standard for belt-drive analog turntablesThe TN-3B-SE is a stylish, sleek-looking belt-driven turntable with a built-in MM-type PHONO EQ amplifier.It employs a new tonearm with knife-edge, pivot-point bearings, collaborated with SAEC, the high-end tonearm manufacturer, for superlative stability and resolution. The belt-drive mechanism, meanwhile, helps mitigate any unwanted cogging effects (ie fine pulsing) from the operation of the motor, to ensure a precise and smooth platter rotation. The TN-3B-SE also employs a VM-type cartridge the AT-VM95E manufactured by audio-technica and a high-precision NJM8080 op-amp in its in-built Phono EQ amplifier, allowing the user to enjoy the sound of their vinyl records with low distortion and in high quality.The TN-3B-SE delivers a natural and well-balanced sound quality and is quick and easy to set up and start enjoying. We believe it sets a new standard that will satisfy the needs of both audiophiles and ardent record collectors.Features at a glanceBelt-drive mechanism2-speed turntable supporting 33-? and 45 rpmKnife-edge, pivot-point tonearm, designed by high-end tonearm manufacturer SAECAluminum die-cast platterBuilt-in PHONO EQ amplifier compatible with MM-type cartridgesHi-fi grade op-amp, NJM8080, used in PHONO EQ stageAnti-skating mechanismPHONO/LINE analog output (switchable)Gold-plated oxidation-resistant output connectorsPre-installed AT-VM95E cartridge supplied by audio-technicaRigid, high-density MDF plinth with multi-layered lacquer finishShock-absorbing insulating feetGND terminalRoHS compliantKnife-edge, pivot-point tone-arm bearingsIn collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer, the TN-3B's tone-arm employs a knife-edge, pivot-point bearing. Unlike the case for tonearms with conventional bearings, any fine vertical movements that take place in this tone-arm actually help in delivering a more dynamic sound with excellent resolution. The S-shaped tone-arm also employs a universal head-shell fitting, allowing users to quickly and easily swap cartridges/head-shells, and supports a wide range of cartridge weights (from 14 - 23g / 0.5 - 0.8 oz.)?Precision anti-skating and stylus-pressure adjustmentThe static-balanced, S-shape tone-arm is equipped with a counterweight for precise stylus-pressure adjustment, as well as an anti-skating mechanism for accurate tracking force adjustment, allowing the cartridge to accurately play any quality vinyl disc.Pre-installed VM-series cartridgeA VM-type cartridge the AT-VM95E manufactured by audio-technica exclusive for TEAC with an elliptical-shaped stylus tip comes pre-installed on the head-shell for convenience. After you’ve opened the box, set up the platter and mounted the head-shell on the tonearm, you'll be ready to enjoy your records.* Replacement styli should be available at the retail store where you purchased the unit, or via the TEAC On-line store. (TEAC On-line store is available in selected countries.)* The VM-series cartridge is a MM (Moving Magnet) type design, and is compatible with all conventional MM-type phono EQ amplifiers.Built-in MM-type phono EQ amplifierThe TN-3B-SE incorporates an MM-type phono EQ amplifier, allowing you to connect the turntable to a conventional amplifier/hi-fi system that lacks a PHONO input. A low distortion, hi-fi-grade op-amp, the NJM8080, is employed to boost the low-level signals from the phono cartridge up to LINE level.External belt-drive with aluminum die-cast platterA belt-drive arrangement is employed in order to minimise any motor cogging effects by driving the outer rim of the platter (which has a larger diameter, mass and surface area).Luxurious, multi-layer lacquer paint finishAll internal components are mounted on a robust and high-density MDF plinth for rigidity and vibration-deadening. Thanks to its sleek and stylish design, the TN-3B looks at home in most domestic environments, creating the perfect setting for listening to vinyl records.33-? and 45 rpm 2-speed turntableThe TN-3B-SE supports both 33-? and 45 rpm for LP and EP records. Our insistence on quality engineering can even be seen in the construction of the rotary control for start-up/speed selection, formed of machined aluminium.Insulating feet with excellent shock absorptionThe insulating feet comprise a machined aluminium shell, topped with a rubber cushion that is fixed to the high-density MDF plinth. Thanks to their excellent shock absorption characteristics, the TN-3B-SE is very resistant to acoustic feedback.Honeycomb patterned bottom panelIn order to achieve sleek cabinet design without compromising rigidity, the bottom panel is imprinted with a honeycomb pattern that minimises unwanted vibrations.

A new, high-performance standard for belt-drive analog turntablesThe TN-3B-SE is a stylish, sleek-looking belt-driven turntable with a built-in MM-type PHONO EQ amplifier.It employs a new tonearm with knife-edge, pivot-point bearings, collaborated with SAEC, the high-end tonearm manufacturer, for superlative stability and resolution. The belt-drive mechanism, meanwhile, helps mitigate any unwanted cogging effects (ie fine pulsing) from the operation of the motor, to ensure a precise and smooth platter rotation. The TN-3B-SE also employs a VM-type cartridge the AT-VM95E manufactured by audio-technica and a high-precision NJM8080 op-amp in its in-built Phono EQ amplifier, allowing the user to enjoy the sound of their vinyl records with low distortion and in high quality.The TN-3B-SE delivers a natural and well-balanced sound quality and is quick and easy to set up and start enjoying. We believe it sets a new standard that will satisfy the needs of both audiophiles and ardent record collectors.Features at a glanceBelt-drive mechanism2-speed turntable supporting 33-? and 45 rpmKnife-edge, pivot-point tonearm, designed by high-end tonearm manufacturer SAECAluminum die-cast platterBuilt-in PHONO EQ amplifier compatible with MM-type cartridgesHi-fi grade op-amp, NJM8080, used in PHONO EQ stageAnti-skating mechanismPHONO/LINE analog output (switchable)Gold-plated oxidation-resistant output connectorsPre-installed AT-VM95E cartridge supplied by audio-technicaRigid, high-density MDF plinth with multi-layered lacquer finishShock-absorbing insulating feetGND terminalRoHS compliantKnife-edge, pivot-point tone-arm bearingsIn collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer, the TN-3B's tone-arm employs a knife-edge, pivot-point bearing. Unlike the case for tonearms with conventional bearings, any fine vertical movements that take place in this tone-arm actually help in delivering a more dynamic sound with excellent resolution. The S-shaped tone-arm also employs a universal head-shell fitting, allowing users to quickly and easily swap cartridges/head-shells, and supports a wide range of cartridge weights (from 14 - 23g / 0.5 - 0.8 oz.)?Precision anti-skating and stylus-pressure adjustmentThe static-balanced, S-shape tone-arm is equipped with a counterweight for precise stylus-pressure adjustment, as well as an anti-skating mechanism for accurate tracking force adjustment, allowing the cartridge to accurately play any quality vinyl disc.Pre-installed VM-series cartridgeA VM-type cartridge the AT-VM95E manufactured by audio-technica exclusive for TEAC with an elliptical-shaped stylus tip comes pre-installed on the head-shell for convenience. After you’ve opened the box, set up the platter and mounted the head-shell on the tonearm, you'll be ready to enjoy your records.* Replacement styli should be available at the retail store where you purchased the unit, or via the TEAC On-line store. (TEAC On-line store is available in selected countries.)* The VM-series cartridge is a MM (Moving Magnet) type design, and is compatible with all conventional MM-type phono EQ amplifiers.Built-in MM-type phono EQ amplifierThe TN-3B-SE incorporates an MM-type phono EQ amplifier, allowing you to connect the turntable to a conventional amplifier/hi-fi system that lacks a PHONO input. A low distortion, hi-fi-grade op-amp, the NJM8080, is employed to boost the low-level signals from the phono cartridge up to LINE level.External belt-drive with aluminum die-cast platterA belt-drive arrangement is employed in order to minimise any motor cogging effects by driving the outer rim of the platter (which has a larger diameter, mass and surface area).Luxurious, multi-layer lacquer paint finishAll internal components are mounted on a robust and high-density MDF plinth for rigidity and vibration-deadening. Thanks to its sleek and stylish design, the TN-3B looks at home in most domestic environments, creating the perfect setting for listening to vinyl records.33-? and 45 rpm 2-speed turntableThe TN-3B-SE supports both 33-? and 45 rpm for LP and EP records. Our insistence on quality engineering can even be seen in the construction of the rotary control for start-up/speed selection, formed of machined aluminium.Insulating feet with excellent shock absorptionThe insulating feet comprise a machined aluminium shell, topped with a rubber cushion that is fixed to the high-density MDF plinth. Thanks to their excellent shock absorption characteristics, the TN-3B-SE is very resistant to acoustic feedback.Honeycomb patterned bottom panelIn order to achieve sleek cabinet design without compromising rigidity, the bottom panel is imprinted with a honeycomb pattern that minimises unwanted vibrations.

A wireless turntable for new way of enjoying vinyl recordsThe TN-280BT-A3 is not only a great-sounding turntable for music enthusiastic who want to enjoy vinyl record from closet or re-issues. It brings you a totally new way of listening to vinyl records with its Bluetooth® capability. No extra cost for hi-fi components or complicated wiring is required. Only Bluetooth® speakers or headphones you might have for iPhones are required to enjoy the world of vinyl records.The TN-280BT-A3 also accommodates a built-in Phono EQ amplifier that provides Line output, and allows you to connect to almost any sound system regardless type of inputs.The belt-drive motor on the TN-280BT-A3 reduces vibration for sweeter, more accurate sound than direct-drive turntables for DJ, while an aluminum die-cast platter and anti-skating system provide a solid foundation for great-sounding playback. The high-performance, upgradable MM cartridge AT3600L from audio-technica captures every detail on your record, and the static-balanced straight tone-arm ensures clear sound. It’s all housed in a handsome case in black or walnut veneer.For music enthusiasts who want to hear every sensuous note of their vinyl collection.Features at a glanceBelt-drive turntableBuilt-in Bluetooth® transmitterBuilt-in MM phono equalizing amplifierPHONO, LINE, and Bluetooth® outputsVM cartridge audio-technica AT3600L from audio-technica includedAluminum die-cast platter with felt matAnti-skating mechanism2-speed (33-1/3, 45 rpm)High-density MDF cabinet for better vibration and resonanceSleek design in black or walnut finishBuilt-in Bluetooth® transmitterThe TN-280BT-A3 delivers the sound wirelessly via built-in Bluetooth® transmitter, in addition to conventional RCA output in analog Line or Phono format. The pairing button is located at the right-front side of the cabinet, and pairing indicator tells you the speakers/headphone is successfully connected.A new way of record playingUnlike other turntable units, the TN-280BT-A3 provides you the simplest way of listening to vinyl records via Bluetooth® wireless technology.If you already have a Bluetooth-enable speakers or headphone for your iPhone/Android phone, all you have to do is to install the TN-280BT-A3 in your room – no pricy hi-fi system and complicated wiring are required –. The connection is as simple as ABC, just press the BT pairing button when the Bluetooth® speakers/headphones are ready to the pairing, and once the connection is established, you don't need to repeat the same process every time you listening to vinyl records.The TN-280BT-A3 also provides conventional ways of connection to hi-fi system with or without PHONO input via cable, and an RCA audio cable comes with the TN-280BT-A3.An authentic 2-speed TurntableThe high inertia Aluminum die-cast platter is driven by a high torque DC motor for stable rotation for both 33-? and 45 rpm. A soft felt mat further reduces vibration effectively. The high accuracy of the spindle is maintained by a polished Stainless steel Spindle and highly durable bronze spindle holder.High-density MDF cabinet constructionUnlike other with plastic chassis, the heavy MDF cabinet minimizes vibrations and resonance for clearer sound when you playback your vinyl collection.Built-in MM-type Phono EQ amplifierEnjoy vinyl playback with any amplifier. The TN-280BT-A3 supports both Phono and Line outputs that allow you to enjoy vinyl records with or without phono equalizer.VM-type cartridge pre-installed for quick startA straight tone-arm is employed for high tracking accuracy. The anti-skating mechanism also ensures accurate tracking of vinyl records. An VM-type (equivalent to MM-type) cartridge audio-technica AT3600L is installed at the factory.Anti-skating adjustment for accurate trackingSame as upper models, the TN-280BT-A3’s anti-skating mechanism ensures accurate tracking.

A wireless turntable for new way of enjoying vinyl recordsThe TN-280BT-A3 is not only a great-sounding turntable for music enthusiastic who want to enjoy vinyl record from closet or re-issues. It brings you a totally new way of listening to vinyl records with its Bluetooth® capability. No extra cost for hi-fi components or complicated wiring is required. Only Bluetooth® speakers or headphones you might have for iPhones are required to enjoy the world of vinyl records.The TN-280BT-A3 also accommodates a built-in Phono EQ amplifier that provides Line output, and allows you to connect to almost any sound system regardless type of inputs.The belt-drive motor on the TN-280BT-A3 reduces vibration for sweeter, more accurate sound than direct-drive turntables for DJ, while an aluminum die-cast platter and anti-skating system provide a solid foundation for great-sounding playback. The high-performance, upgradable MM cartridge AT3600L from audio-technica captures every detail on your record, and the static-balanced straight tone-arm ensures clear sound. It’s all housed in a handsome case in black or walnut veneer.For music enthusiasts who want to hear every sensuous note of their vinyl collection.Features at a glanceBelt-drive turntableBuilt-in Bluetooth® transmitterBuilt-in MM phono equalizing amplifierPHONO, LINE, and Bluetooth® outputsVM cartridge audio-technica AT3600L from audio-technica includedAluminum die-cast platter with felt matAnti-skating mechanism2-speed (33-1/3, 45 rpm)High-density MDF cabinet for better vibration and resonanceSleek design in black or walnut finishBuilt-in Bluetooth® transmitterThe TN-280BT-A3 delivers the sound wirelessly via built-in Bluetooth® transmitter, in addition to conventional RCA output in analog Line or Phono format. The pairing button is located at the right-front side of the cabinet, and pairing indicator tells you the speakers/headphone is successfully connected.A new way of record playingUnlike other turntable units, the TN-280BT-A3 provides you the simplest way of listening to vinyl records via Bluetooth® wireless technology.If you already have a Bluetooth-enable speakers or headphone for your iPhone/Android phone, all you have to do is to install the TN-280BT-A3 in your room – no pricy hi-fi system and complicated wiring are required –. The connection is as simple as ABC, just press the BT pairing button when the Bluetooth® speakers/headphones are ready to the pairing, and once the connection is established, you don't need to repeat the same process every time you listening to vinyl records.The TN-280BT-A3 also provides conventional ways of connection to hi-fi system with or without PHONO input via cable, and an RCA audio cable comes with the TN-280BT-A3.An authentic 2-speed TurntableThe high inertia Aluminum die-cast platter is driven by a high torque DC motor for stable rotation for both 33-? and 45 rpm. A soft felt mat further reduces vibration effectively. The high accuracy of the spindle is maintained by a polished Stainless steel Spindle and highly durable bronze spindle holder.High-density MDF cabinet constructionUnlike other with plastic chassis, the heavy MDF cabinet minimizes vibrations and resonance for clearer sound when you playback your vinyl collection.Built-in MM-type Phono EQ amplifierEnjoy vinyl playback with any amplifier. The TN-280BT-A3 supports both Phono and Line outputs that allow you to enjoy vinyl records with or without phono equalizer.VM-type cartridge pre-installed for quick startA straight tone-arm is employed for high tracking accuracy. The anti-skating mechanism also ensures accurate tracking of vinyl records. An VM-type (equivalent to MM-type) cartridge audio-technica AT3600L is installed at the factory.Anti-skating adjustment for accurate trackingSame as upper models, the TN-280BT-A3’s anti-skating mechanism ensures accurate tracking.

AT-LP8XΗ Audio-Technica επεκτείνει τη σειρά των πικάπ direct-drive με το ημιαυτόματο AT-LP8X, με νέο μηχανισμό που σηκώνει αυτόματα τον βραχίονα στο τέλος της πλευράς του δίσκου και σταματά τον κινητήρα.Ο βραχίονας αλουμινίου σχήματος J, εμπνευσμένος από κλασικά μοντέλα της A-T των δεκαετιών του 1960 και του 1970, έρχεται με το νέο κεφαλόκελυφος AT-LT10 και την κεφαλή AT-VM95E BK (μαύρη) με ελλειπτική βελόνα 0,3 × 0,7 mil, για εξαιρετικό διαχωρισμό καναλιών και χαμηλή παραμόρφωση. Η βελόνα μπορεί να αντικατασταθεί με οποιαδήποτε από τις πέντε επιπλέον βελόνες της σειράς VM95, ενώ η ρύθμιση VTA και το βοηθητικό αντίβαρο επιτρέπουν τη χρήση πολλών άλλων κεφαλών.Το AT-LP8X παίζει δίσκους 33-1/3, 45 και 78 στροφών. Το πλατό χυτού αλουμινίου 25 mm με ελαστική απόσβεση κατά των συντονισμών συνοδεύεται από λαστιχένιο ταπέτο 2,5 mm και κινείται από κινητήρα με αισθητήρα για συνεχώς ακριβή ταχύτητα. Ο κινητήρας και το αποδοτικό εσωτερικό τροφοδοτικό βρίσκονται σε βάση από MDF με ρυθμιζόμενα πόδια, για εξαιρετική προστασία από θόρυβο και κραδασμούς.Περιλαμβάνονται αποσπώμενο καλώδιο RCA (διπλό RCA αρσενικό σε διπλό RCA αρσενικό με γείωση), αντάπτορας 45 στροφών και αποσπώμενο καπάκι σκόνης με μεντεσέδες.ΧαρακτηριστικάΗμιαυτόματο πικάπ direct-drive με τρεις ταχύτητες: 33-1/3, 45, 78 στροφέςΚινητήρας με αισθητήρα ταχύτητας για ακριβή περιστροφή του πλατόΝέος κινητήρας DC servo χαμηλής ροπής για καλύτερο wow & flutterΠλατό χυτού αλουμινίου 25 mm με ελαστική απόσβεση και λαστιχένιο ταπέτο 2,5 mmΒραχίονας σχήματος J με ρυθμιζόμενο VTAΝέος μηχανισμός που σηκώνει αυτόματα τον βραχίονα στο τέλος του δίσκου και σταματά τον κινητήραΚεφαλή AT-VM95E BK (ελλειπτική βελόνα 0,3 × 0,7 mil), συμβατή με όλες τις βελόνες VM95Νέο ελαφρύ κεφαλόκελυφος AT-LT10Βοηθητικό αντίβαρο για βάρος κεφαλής/κεφαλόκελυφους 14,0 – 23,5 gΝέο εσωτερικό τροφοδοτικό βελτιστοποιημένο για τον ήχοΚατασκευή από MDFΈξοδος phono για καθαρή, απευθείας μετάδοση του σήματος της κεφαλήςΠεριλαμβάνει αποσπώμενο καλώδιο RCA με γείωση, αντάπτορα 45 στροφών και αποσπώμενο καπάκι σκόνης

Απολαύστε εκλεπτυσμένο ήχο με το πικάπ Music Hall MMF Mark 1. Η υπογραφή του ιδρυτή της Music Hall, Roy Hall, είναι εμφανής σε ολόκληρη τη σειρά της εταιρείας, και το Mark 1 δεν αποτελεί εξαίρεση!Με έναν ολοκαίνουριο σχεδιασμό βραχίονα, το Mark 1 προσφέρει εξαιρετική ακαμψία και εσωτερική απόσβεση, με κεφαλή από αλουμίνιο υψηλής ακρίβειας, CNC-κατεργασμένο στήριγμα βραχίονα και πλήρως ρυθμιζόμενο VTA – ένα χαρακτηριστικό που σπάνια συναντάται σε αυτήν την κατηγορία τιμής. Η μαγνητική λειτουργία anti-skating και ο εργοστασιακά ρυθμισμένος και σταθερός αντίβαρος κάνουν τη ρύθμιση παιχνιδάκι.Το Mark 1 διαθέτει επίσης κεφαλή χαμηλής μάζας Audio Technica AT3600L, με εξαιρετική ταχύτητα και δυναμισμό, που ταιριάζει άψογα με τα χαρακτηριστικά του βραχίονα, προσφέροντας έναν γεμάτο, πλούσιο ήχο, κάτι που μέχρι τώρα ήταν αδύνατο να επιτευχθεί σε ένα πικάπ οικονομικής κατηγορίας. Με το Music Hall MMF Mark 1, μπορείτε να απολαύσετε κορυφαία ηχητική απόδοση χωρίς συμβιβασμούς.Συνοπτικά:Εξαιρετικά αθόρυβος σχεδιασμός με ιμάντα, 2 ταχυτήτωνΠλατφόρμα από χυτό αλουμίνιοΤαχύτητες 33 1⁄3 και 45 rpmΕνσωματωμένος προενισχυτής phono ή άμεση έξοδος γραμμήςΣτατικά ισορροπημένος βραχίονας σε σχήμα S με αποσπώμενη κεφαλήΈλεγχος anti-skating για καλύτερη στερεοφωνική ισορροπίαΡυθμιζόμενος έλεγχος ταχύτητας +/- 10%Περιλαμβάνεται κάλυμμα σκόνηςΣχεδιασμένο και αναπτυγμένο στις ΗΠΑ και στη ΓαλλίαΔιαστάσεις: w17.7 x d13.8 x h5.7inΒάρος: 12lbs (με συσκευασία) 5.5kgΧαμηλού θορύβου σχεδιασμός με ιμάνταΦινίρισμα με γυαλιστερή λάκα ή επένδυση από καρυδιάΥψηλής ποιότητας βραχίονας αλουμινίου 8.6" σε σχήμα SΚεφαλή αλουμινίου υψηλής ακρίβειας με ρύθμιση VTAΔυναμικά ισορροπημένος και αποσβεσμένος αντίβαροςΜαγνητικό anti-skatingΣυγχρονισμένος κινητήρας AC για κορυφαία σταθερότητα ταχύτηταςΠαρέχεται κεφαλή Audio Technica AT3600L ευθυγραμμισμένη και τοποθετημένηΑκριβές κύριο ρουλεμάν από ανοξείδωτο ατσάλι, επενδυμένο με Teflon® για αθόρυβη λειτουργίαΔυναμικά ισορροπημένη πλατφόρμα από κράμα με μαλακό φελτΥψηλής ποιότητας επιχρυσωμένες υποδοχές RCAΕιδικά ρυθμιζόμενα πόδια με αποσβεστήρες κραδασμώνΠεριλαμβάνονται κάλυμμα σκόνης και αντάπτορας 45 rpm

Απολαύστε εκλεπτυσμένο ήχο με το πικάπ Music Hall MMF Mark 1. Η υπογραφή του ιδρυτή της Music Hall, Roy Hall, είναι εμφανής σε ολόκληρη τη σειρά της εταιρείας, και το Mark 1 δεν αποτελεί εξαίρεση!Με έναν ολοκαίνουριο σχεδιασμό βραχίονα, το Mark 1 προσφέρει εξαιρετική ακαμψία και εσωτερική απόσβεση, με κεφαλή από αλουμίνιο υψηλής ακρίβειας, CNC-κατεργασμένο στήριγμα βραχίονα και πλήρως ρυθμιζόμενο VTA – ένα χαρακτηριστικό που σπάνια συναντάται σε αυτήν την κατηγορία τιμής. Η μαγνητική λειτουργία anti-skating και ο εργοστασιακά ρυθμισμένος και σταθερός αντίβαρος κάνουν τη ρύθμιση παιχνιδάκι.Το Mark 1 διαθέτει επίσης κεφαλή χαμηλής μάζας Audio Technica AT3600L, με εξαιρετική ταχύτητα και δυναμισμό, που ταιριάζει άψογα με τα χαρακτηριστικά του βραχίονα, προσφέροντας έναν γεμάτο, πλούσιο ήχο, κάτι που μέχρι τώρα ήταν αδύνατο να επιτευχθεί σε ένα πικάπ οικονομικής κατηγορίας. Με το Music Hall MMF Mark 1, μπορείτε να απολαύσετε κορυφαία ηχητική απόδοση χωρίς συμβιβασμούς.Συνοπτικά:Εξαιρετικά αθόρυβος σχεδιασμός με ιμάντα, 2 ταχυτήτωνΠλατφόρμα από χυτό αλουμίνιοΤαχύτητες 33 1⁄3 και 45 rpmΕνσωματωμένος προενισχυτής phono ή άμεση έξοδος γραμμήςΣτατικά ισορροπημένος βραχίονας σε σχήμα S με αποσπώμενη κεφαλήΈλεγχος anti-skating για καλύτερη στερεοφωνική ισορροπίαΡυθμιζόμενος έλεγχος ταχύτητας +/- 10%Περιλαμβάνεται κάλυμμα σκόνηςΣχεδιασμένο και αναπτυγμένο στις ΗΠΑ και στη ΓαλλίαΔιαστάσεις: w17.7 x d13.8 x h5.7inΒάρος: 12lbs (με συσκευασία) 5.5kgΧαμηλού θορύβου σχεδιασμός με ιμάνταΦινίρισμα με γυαλιστερή λάκα ή επένδυση από καρυδιάΥψηλής ποιότητας βραχίονας αλουμινίου 8.6" σε σχήμα SΚεφαλή αλουμινίου υψηλής ακρίβειας με ρύθμιση VTAΔυναμικά ισορροπημένος και αποσβεσμένος αντίβαροςΜαγνητικό anti-skatingΣυγχρονισμένος κινητήρας AC για κορυφαία σταθερότητα ταχύτηταςΠαρέχεται κεφαλή Audio Technica AT3600L ευθυγραμμισμένη και τοποθετημένηΑκριβές κύριο ρουλεμάν από ανοξείδωτο ατσάλι, επενδυμένο με Teflon® για αθόρυβη λειτουργίαΔυναμικά ισορροπημένη πλατφόρμα από κράμα με μαλακό φελτΥψηλής ποιότητας επιχρυσωμένες υποδοχές RCAΕιδικά ρυθμιζόμενα πόδια με αποσβεστήρες κραδασμώνΠεριλαμβάνονται κάλυμμα σκόνης και αντάπτορας 45 rpm