Καλώδια Ηχείων

QED Reference XT40i - 5m

XT40i with X-Tube™ Technology As befits a company rapidly closing in on its fifth decades at the forefront of speaker cable design, QED’s brand new XT40i speaker cable builds on the formidable reputation of the XT40 cable it replaces and offers a decisive step up in sound quality.This pure oxygen-free copper cable uses an evolution of QED’s established X-Tube technology to guarantee superb timing and stereo imaging, and adds the brand new and highly innovative Air Gap dielectric to bring unheard-of rhythmic accuracy and musicality to a cable of this modest price. Very low DC resistance adds unrivalled frequency response to XT40i’s already potent audio capability. The result is a cable that advances on the class-leading standards set by its predecessor.We urge you to audition XT40i - we’re confident you’ll agree it even outperforms alternative cables at many times the price. Prepare to be surprised and delighted. Air Gap dielectric By increasing the separation of the conductors inside the cable, and therefore the amount of air between them, QED has created a low-loss Air Gap dielectric. This technology halves the dissipation and capacitance characteristics of the cable, and results in numerous audible improvements - particularly where timing and rhythmic accuracy are concerned. Despite this increased separation, though, XT40i retains the sort of cross-sectional area that makes it ideal for long cable runs.  X-Tube technology Forming the cable conductors into a tube-like shape around a hollow insulating rod in the centre of the cable equalises current densities, delivers very low inductance and presents a consistent, even load to an amplifier. The result is a cable that retains more of the finest musical details, that handles rhythms and tempos in the most natural and musically satisfying way, and that outperforms rival designs costing far more. Specification: Outside diameter: 6 x 14 mm Conductor area: 4 mm² Dielectric properties: Air Gap (εr = 2.4) Conductor chemistry: 99.999% oxygen-free copper Dielectric properties: Air Gap Loop resistance: 8.0 mΩ/m Parallel capacitance: 35 pF/m Dissipation factor @ 10kHz: 0.0295 Self-inductance: 0.57 μH/m Gauge: 12 AWG

269 €

Mogami 3104

Το καλώδιο Mogami 3104 έχει σχεδιαστεί για να παρέχει υψηλή απόδοση ήχου. Ενσωματώνει 4 αγωγούς χαλκού OFC με διατομή 4 mm² (12AWG) και διαθέτει αποτελεσματική μόνωση από PVC. Εξασφαλίζει επομένως εξαιρετική αγωγιμότητα του ηχητικού σήματος ενώ περιορίζει σημαντικά τις παρεμβολές και συνεπώς τον παρασιτικό θόρυβο. Εξασφαλίζει έτσι μια ακριβή και διαφανή αναπαραγωγή σήματος. Το περίβλημα από PVC παρέχει επίσης πολύ καλή ευελιξία για εύκολη συναρμολόγηση και εγκατάσταση.

30 €

QED QE1460 XT25 - 2m

The journey to XT25..... The QED speaker cable story began in 1973, with the launch of the world's first specialist speaker cables, QED 42 and 79 strand, now household names in the audio industry. Building on this longstanding British speaker cable heritage, QED embarked on an exhaustive research program into cable parameters which began in 1995 and continues into 2017 with the release of “The Sound of Science”, a 40 page White Paper distilling the research published since 1973 by QED. These reports set out the “top down” design-principles that have resulted most recently in the development of QED XT25 loudspeaker cable – the new class leading standard in budget to mid-range speaker cables. What are the features which make this cable so special? X-Tube™ technology first came to prominence in 2005 with the launch of the world renowned Silver Anniversary XT, the most highly regarded mid-range cable in the world, winning the What Hi-Fi Product of the Year three years in a row. These design principles also grace the multiple award winning XT40 speaker cable and XT25. As frequency increases, electrons flow more and more towards the periphery of a conductor so that if the frequency is high enough only a very thin layer (or skin) on the outside of the conductor is used. This “skin depth” varies for different materials at a fixed frequency and in copper it means that if a conductor has larger than 0.66 mm² cross-sectional area not all of that area is available for an analogue music signal to use. In SAXT the “skin effect” problem was effectively eliminated by the use of X-Tube™ Technology which works by placing all of the conducting material around a central hollow insulating rod. However, for a.c. signals, changing magnetic fields generated by the flow of current set up eddy currents in nearby conductors which force current to flow only in areas furthest away from conductors carrying current in the same direction and vice versa. This “proximity effect” has a detrimental influence on current distribution in a speaker cable even if it utilises X-Tube™ Technology. With XT25 we tackle the proximity effect and the skin effect by combining our existing Aircore™ and X-Tube™ Technologies into a new X-Tube™ variation. By forming the conductors into a tube-like shape with a hollow centre, current densities at higher frequencies are maintained because the electric field which contributes towards the skin effect acts towards the centre of the conductor from where the conductive material has been removed. At the same time instead of using a braided structure a ring of conductors is formed into separate bundles with only a loose electrical association which are then twisted into a 90 mm lay so that no single conductor bundle remains on the inside or outside of the cable (and therefore prey to the proximity effect) for long enough for it to become an audible problem. This geometry promotes a more consistent signal distribution making for a more accurate musical reproduction. Low DC Resistance At QED we recognise that low d.c. resistance of the loudspeaker cable is of paramount importance for high-fidelity signal transfer. This is because the speaker presents a frequency dependent load to the amplifier of which the cable forms a variable proportion. If resistance is allowed to be too large then audible changes to the frequency response characteristics of the loudspeaker will be introduced which cannot be corrected for by the amplifier’s negative feedback loop. In order to provide a marked improvement over similarly priced cables in both our own and our competitors’ ranges without increasing the overall size and flexibility of the cable substantially, the cross-sectional area (CSA) of XT25 has been enlarged to 2.5mm2 of 99.999% oxygen-free copper. This instantly gives the new cable a low d.c. resistance and therefore a more accurate musical delivery. Low-Loss Dielectric It is not generally appreciated that the electrical signals moving at or near the speed of light in a wire do so via the medium of electromagnetic (EM) waveforms which exist within the dielectric which surrounds the conductors as well as within the conductors themselves. The movement of electrons along the conductor merely facilitates generation of the EM waveform as their “drift velocity” is only a few centimetres per second. It is therefore important to ensure that the dielectric material used to insulate and protect the central conductors of the speaker cable is of a type which “permits” the establishment of EM waveforms without appreciable loss. Dielectric losses are directly proportional to the “permittivity” of the material used and as this a measure of each material relative to that in a vacuum it should be as close to unity as possible. Like its predecessors, XT25 uses a specially formulated low-density polyethylene (LDPE) dielectric which at 1.69 has the lowest relative permittivity practically available. QED research has shown that low capacitance cables are generally preferred in listening tests over high capacitance counterparts and this is usually because low-loss dielectrics have been utilised. The use of LDPE and careful control of conductor spacing results in a cable with a very low capacitance per meter and a dissipation factor (loss tangent) of 0.0001 at 10 kHz. What is the result of all these techniques? The graph below shows how the dc resistance of XT25 remains effectively unchanged across the entire audible frequency band when compared to a conventional cable of the same cross-sectional area. Combined with the sonic advantages of a low loss dielectric the improvements in current distribution place the new cable in a class well above cables with a less sophisticated geometry. What makes XT25 unique? 1. Award winning heritage guaranteed All QED cables are designed using the top down principle. XT25 represents the core musical performance trickled down from our money-no-object Supremus cable in a more affordable package. QED has won more What Hi-fi? Awards than any other single brand and with XT25 this heritage is delivered at a sensible price. Unlike most other manufacturers, QED offer an unlimited lifetime guarantee which means that if your cable ever fails to deliver to its full potential during its lifetime we will replace it free of charge. 2. X-Tube™ Technology....but with a twist In loudspeaker cables high pitched sounds are forced to travel towards the outside of the conductor and so are able to use less and less of the available cross-sectional area as the pitch increases. This is called the “Skin Effect”. It means that for high frequencies the resistance of the cable appears to be much higher than it does for lower pitched sounds. Eddy currents in one conductor can affect the current flowing in an adjacent conductor so that currents flowing in the same direction move away from each other. This “Proximity Effect” also increases resistance as frequency increases. These phenomena have a detrimental effect on the fidelity of the sound you hear. The XT25 variation of QED X-Tu Insulation LDPE jacket with 100% coverage of Aluminium Mylar tape wrap Plugs and spades QED Airloc™ Forte banana plugsbe™ Technology solves these problems by creating a hollow tubular conductor geometry out of individual conductor bunches through which each frequency can pass with equal ease when compared to traditional solid or stranded conductors. 3. Low-Loss Dielectric Music signals in a loudspeaker cable move back and forth many times every second. The insulating material used to separate the send and return conductors from each other (the dielectric) has to be charged and discharged every time. Not all of the energy stored in the dielectric during each charge cycle is completely returned during each discharge cycle which has a detrimental effect on the fidelity of the sound you hear. That’s why at QED we use low-loss dielectric materials such as Polyethylene (PE) or Teflon™ (PTFE) in preference to cheaper PVC alternatives found in inferior unbranded cables. 4. 99.999% Oxygen-Free Copper Speaker cables need to have a large current carrying capacity. If the electrical resistance of the cable is too large, part of the music signal will be lost, causing a detrimental effect on the fidelity of the sound you hear. To stop this from happening we make the resistance of our speaker cables as small as possible. We do this by using the largest practical cross-sectional area of copper within the size constraints of each cable. In order to squeeze the last drop of performance from the conductors we make sure that there are no impurities in the copper which would defeat the object of making them so large. That’s why we use 99.999% oxygen-free copper exclusively. 5. Just Listen Unique proprietary technology and trademarked geometries plus our award winning heritage all combine to create audible sonic improvements when compared to other loudspeaker cables. Ask your dealer for an audition – he will be happy to let you hear the difference.

109 €

Naim Super Lumina Καλώδιο Ηχείων - 3m

Τα καλώδια ηχείων Super Lumina έχουν σχεδιαστεί για να ελαχιστοποιούν τις επιδράσεις εξωτερικών και εσωτερικών παρεμβολών, διατηρώντας τη μέγιστη πιστότητα του σήματος. Ο βασικός σχεδιασμός του καλωδίου αποτελείται από πολλούς ξεχωριστά μονωμένους αγωγούς πολλαπλών ινών, επιχαλκωμένους με ασήμι, διαφορετικών διαμέτρων. Αυτοί περικλείονται από μια "ασπίδα" κασσιτερο-επικαλυμμένου χαλκού και προστατεύονται εξωτερικά από ένα εύκαμπτο περίβλημα, το οποίο διευκολύνει την εγκατάσταση και ελαχιστοποιεί τις μικροφωνικές παρεμβολές. Κάθε αγωγός σήματος, επιστροφής, γείωσης και θωράκισης κατασκευάζεται ξεχωριστά για τη συγκεκριμένη λειτουργία του.Κάθε καλώδιο Super Lumina συναρμολογείται χειροποίητα στις εγκαταστάσεις της Naim Audio στο Salisbury, ακριβώς σύμφωνα με τις προδιαγραφές του πελάτη ως προς το μήκος και τις απολήξεις. Η διαδικασία είναι λεπτομερής και απαιτεί υψηλή δεξιοτεχνία, ακολουθώντας αυστηρές οδηγίες που καλύπτουν κάθε στάδιο της κατασκευής.Κάθε καλώδιο υποβάλλεται επίσης σε μια διαδικασία αποφόρτισης εσωτερικών τάσεων, η οποία απελευθερώνει τα υλικά από τις καταπονήσεις που προκύπτουν κατά την παραγωγή. Αυτό επιτρέπει την επίτευξη της βέλτιστης απόδοσης με ελάχιστο χρόνο στρωσίματος (run-in).

2.990 €

Naim NAC A5

Κάθε κρίκος της αλυσίδας hi-fi είναι σημαντικός. Οι συνδέσεις ανάμεσα στα μηχανήματα, και προς τα ηχεία, είναι καθοριστικές για την απόδοση κάθε ηχοσυστήματος.Το NAC A5 είναι το πολύκλωνο καλώδιο ηχείων της Naim, με δύο χωριστούς αγωγούς 4mm². Ο σχεδιασμός του είναι βελτιστοποιημένος για χρήση με ενισχυτές Naim Audio και οποιαδήποτε ηχεία, ώστε η χωρητικότητα, η επαγωγή και η αντίστασή του να είναι πλήρως συμβατές.Η Naim προτείνει να χρησιμοποιείται μαζί με τα γωνιακά διπλά βύσματα ηχείων της, που προσφέρουν ασφαλή, πρακτική και πολύ αποτελεσματική σύνδεση.ΧαρακτηριστικάΔύο χωριστοί αγωγοί 4mm²Σχεδιασμός και κατασκευή βελτιστοποιημένα για ενισχυτές Naim AudioΔιατίθεται σε μαύρο και λευκό

52 €

Van den Hul The D-352 Hybrid (Halogen Free)

Πολύκλωνο καλώδιο ηχείων με αγωγούς απο επάργυρο OFC χαλκό κατάλληλο για διπλοκαλωδίωση.10 AWGAντίσταση: 0,34 Ohm/100μΧωρητικότητα 32,5 pF/μ*Τιμή ανά μέτρο ατερμάτιστο.Επικοινωνήστε μαζί μας για το κόστος τερματισμού. ΠΡΟΔΙΑΓΡΑΦΕΣ:Cable Type:Twin conductorConductor Material:HYBRID: High purity dense Silver coated high purity Matched Crystal OFC + Linear Structured Carbon ® saturated layer(s)Design Purpose/Application Area(s):Loudspeaker cableEff. Conductor Ø/Eq. AWG No./Strands:2x(5.23 mm² / AWG 10 / 296)External Diameter /-Dimensions:21.0 mm. wide; 6.5 mm. thickResistance 20 °C / 68 °F:0.34 Ohm/100 m.Capacitance:32.5 pF/m.Insulation / Dielectric Strength / Test Voltage:HULLIFLEX ® 3 / 300 Vrms min. 

33 €

NorStone Skye MC Mounted Speaker Cable 3m

Το NorStone Skye MC είναι high-end τερματισμένο καλώδιο ηχείων για audiophiles που αναζητούν εξαιρετική ποιότητα ήχου. Με αγωγούς από επάργυρο χαλκό OFC, εξασφαλίζει άριστη μεταφορά του σήματος, διατηρώντας την καθαρότητα και τη δυναμική του ήχου. Η συνεστραμμένη δομή του το προστατεύει από τις ηλεκτρομαγνητικές παρεμβολές, για καθαρή και φυσική απόδοση. Τα εναλλάξιμα βύσματα μπανάνας και φουρκέτας, με επίχρυσες επαφές 24K, εξασφαλίζουν αξιόπιστη σύνδεση στους ακροδέκτες. Βραβευμένο με Diapason d'Or, το Skye MC είναι ιδανική επιλογή για να αναβαθμίσετε το ηχοσύστημά σας.Το καλώδιο διατίθεται σε ζεύγος. Το μήκος που αναγράφεται αφορά κάθε καλώδιο του ζεύγους: για μήκος Χ μέτρων, παραλαμβάνετε 2 καλώδια των Χ μέτρων.

329 €

NorStone SIL250

Η πολύ χαμηλή γραμμική αντίσταση των αγωγών από επαργυρωμένο χαλκό OFC εξασφαλίζει ακόμα πιο αναλυτική ακρόαση. Η κατασκευή του μειώνει όλες τις απώλειες στη γραμμή σε σχεδόν μη μετρήσιμα επίπεδα. Το αποτέλεσμα είναι λαξευμένη ακρόαση, όπου κάθε μικρή λεπτομέρεια φτάνει στα ηχεία, με τρισδιάστατη ηχητική εικόνα και σχεδόν απτή αίσθηση, ακόμα και στα πιο σύνθετα μουσικά περάσματα. Τα καλώδια NorStone Silver ξεπερνούν ό,τι θα περιμέναμε από ένα καλώδιο αυτής της τιμής.ΣχεδιασμόςΣχήμα: τετράγωνη διατομή για το −, στρογγυλή για το +Φινίρισμα: γυαλιστερόΣήμανση: ένδειξη του μήκους που απομένει

34 ,99 €