Audio Technica

The low-profile AT4022 omnidirectional condenser recording mic is outstanding for piano, acoustic guitar, and other acoustic instruments. With a flat, extended frequency response and wide dynamic range ideal for critical studio and live applications, the AT4022 handles high SPLs with ease. The microphone’s omnidirectional polar pattern preserves the “sound” of the recording location, delivers flat response and freedom from proximity effect. Its low-mass diaphragm improves transient response and reduces handling/mechanical noise transfer. Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: OmnidirectionalFrequency Response: 20-20,000 HzLow Frequency Roll-Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 PaImpedance: 250 ohmsMaximum Input Sound Level: 146 dB SPL, 1 kHz at 1% T.H.D.; 156 dB SPL, with 10 dB pad (nominal)Noise: 13 dB SPLDynamic Range (Typical): 133 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 81 dB, 1 kHz at 1 PaPhantom Power Requirements: 48V DC, 3.0 mA typicalSwitches: Flat, roll-off; 10 dB padWeight: 124 g (4.4 oz)Dimensions: 144.0 mm (5.67") long, 21.0 mm (0.83") maximum body diameterOutput Connector: Integral 3-pin XLRM-typeAccessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying caseAudio-Technica Case Style: S1

Ideal for professional recording and critical applications in broadcast, this versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. Its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).The AT4051b consists of two modular subassemblies: an AT4900b-48 body and an AT4051b-EL cardioid head capsule (both available separately). Additional interchangeable capsules are available in omnidirectional (AT4049b-EL) and hypercardioid (AT4053b-EL). Specifications:Element: Externally polarized (DC bias) capacitorPolar Pattern: CardioidFrequency Response: 20-20,000 HzLow Frequency Roll-Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 PaImpedance: 50 ohmsMaximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)Noise: 16 dB SPLDynamic Range (Typical): 129 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 78 dB, 1 kHz at 1 PaPhantom Power Requirements: 48V DC, 4.8 mA typicalSwitch: Flat, roll-off; 10 dB pad (nominal)Weight: 126 g (4.4 oz)Dimensions: 155.0 mm (6.10") long, 21.0 mm (0.83") maximum body diameterOutput Connector: Integral 3-pin XLRM-typeOptional Interchangeable Elements (sold separately):AT4049b-EL (Omnidirectional);AT4053b-EL (hypercardioid)Accessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying caseAudio-Technica Case Style: S1

This versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).The AT4053b consists of two modular subassemblies: an AT4900b-48 body and an AT4053b-EL hypercardioid head capsule (both available separately). Additional interchangeable capsules are available in omnidirectional (AT4049b-EL) and cardioid (AT4051b-EL). Specifications:Element: Externally polarized (DC bias) capacitorPolar Pattern: HypercardioidFrequency Response: 20-20,000 HzLow Frequency Roll-Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 PaImpedance: 50 ohmsMaximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)Noise: 16 dB SPLDynamic Range (Typical): 129 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 78 dB, 1 kHz at 1 PaPhantom Power Requirements: 48V DC, 4.8 mA typicalSwitch: Flat, roll-off; 10 dB pad (nominal)

Designed for critical home/project/professional studio applications and live performance, this side-address cardioid studio condenser delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications, the AT2035 provides an exceptional level of consistency from model to model. It comes equipped with a protective pouch and a custom shock mount.

The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more. Specifications:Element: Externally-polarized (DC bias) condenserPolar Patterns: Cardioid, Omnidirectional, Figure-of-EightFrequency Response: 20-20,000 HzLow Frequency Roll-Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: –42 dB (7.9 mV) re 1V at 1 Pa.Impedance: 120 ohmsMaximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D., 159 dB SPL, with 10 dB pad (nominal)Noise: 17 dB SPLDynamic Range (typical): 132 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 77 dB, 1 kHz at 1 PaPhantom Power Requirements: 11-52V DC, 4.7 mA typicalSwitches: Polar selection, Flat, roll-off, 10 dB pad (nominal)Weight: 412 g (14.5 oz)Dimensions: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameterOutput Connectors: Integral 3-pin XLRM-type

Exceptional low noise, wide dynamic range, and high SPL capability give the Audio-Technica AT4040 Large-Diaphragm Studio Condenser Mic studio versatility. Designed for professional recording, the AT4040 features an externally polarized true condenser designed with a technically advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics. Transformerless circuitry virtually eliminates low-frequency distortion. Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity. The open acoustical environment of the symmetrical housing minimizes unwanted internal reflections. Switchable 80Hz hi-pass filter and 10dB pad. Cardioid pattern. Includes shock mount and case. Requires phantom power.Features:Externally polarized true condenser designTechnically advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristicsExceptionally low noise, wide dynamic range, and high SPL capability give it studio versatilityTransformerless circuitry virtually eliminates low-frequency distortionSwitchable 80Hz hi-pass filter10dB padCardioid patternFrequency response: 20Hz-20kHzSpecifications:Element: Externally-polarized (DC bias) condenserPolar Pattern: CardioidFrequency Response: 20-20,000 HzLow Frequency Roll-Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 PaImpedance: 100 ohmsMaximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.;155 dB SPL, with 10 dB pad (nominal)Noise: 12 dB SPLDynamic Range (typical): 133 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 82 dB, 1 kHz at 1 PaPhantom Power Requirements: 48V DC, 4.2 mA typicalSwitches: Flat, roll-off10 dB pad (nominal)Weight: 12.7 oz (360 g)Dimensions: 6.69" (170.0 mm) long,2.10" (53.4 mm) maximum body diameterOutput Connector: Integral 3-pin XLRM-type

The side-address AT4033aSM offers low-noise, symmetrical, transformerless circuitry that results in exceptional transient response and clean output signals. A strong up-front presence characterizes the sonic signature of this 40 Series pro-audio classic. The AT4033aSM's 80Hz high-pass filter easily switches between flat frequency response and a low-end roll-off that diminishes ambient noise and popping with closely-miked vocals.Features:A strong up-front presence characterizes the sonic signature of this versatile pro-audio classicTransformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transientsPrecision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivityThe 2-micron-thick, vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of useFloating-construction capsule assembly provides isolation from noise and vibrationOpen acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflectionsState-of-the-art surface-mount electronics ensure compliance with Audio-Technica's stringent consistency and reliability standardsCustom shock mount provides superior isolationSpecifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 30-20,000 HzLow Frequency Roll Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 PaImpedance: 100 ohmsMaximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)Dynamic Range: 128 dB, 1 kHz at Max SPLSignal to Noise Ratio: 77 dB, 1 kHz at 1 PaPhantom Power Requirements: 48V DC, 3.2 mA typicalWeight: 13.4 oz (380 g)Dimensions: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameterOutput Connector: Integral 3-pin XLRM-typeAccessories: AT8449 shock mount for 5/8"-27 threaded stands; protective carrying case

The Artist Elite AE3000 delivers supreme performance at extreme SPLs. This high-SPL large diaphragm cardioid condenser instrument mic excels in applications such as guitar cabinets, toms, snare, timpani, horns and overheads. Its large-diaphragm capsule combines with the open architecture of the headcase to provide an extremely accurate and open sound. Its low-profile side-address design with tapered grille allows for optimal positioning. Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 20-20,000 HzLow Frequency Roll-Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: -43 dB (7.0 mV) re 1V at 1 PaImpedance: 100 ohmsMaximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D., 158 dB SPL, with 10 dB pad (nominal)Noise: 11 dB SPLDynamic Range (typical): 137 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 83 dB, 1 kHz at 1 PaPhantom Power Requirements: 11-52V DC, 3 mA typicalSwitches: High-pass filter, 10 dB pad (nominal)Weight: 6.0 oz (170 g)Dimensions: 4.55" (115.5 mm) long, 1.89" (48.0 mm) maximum diameterOutput Connector: Integral 3-pin XLRM-type

The Artist Elite AE5100 large diaphragm cardioid condenser instrument microphone provides uncompromising sound quality for overheads, percussion, acoustic guitar, strings and other acoustic instruments. With rich, warm, accurate sound, the AE5100 also incorporates the most essential ingredients for quality live sound in a choir microphone. Its large-diaphragm capsule delivers accurate, natural response, while its low-profile design permits innovative placement options. With a lower profile than the large studio microphones to which it compares sonically, the AE5100 offers an outstanding performance-to-size ratio. With its low noise and smooth response, the AE5100 is ideal for recording, too.Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 20-20,000 HzLow Frequency Roll Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: -36 dB (15.8 mV) re 1V at 1 PaImpedance: 150 ohmsMaximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL with 10 dB pad (nominal)Dynamic Range: 137 dB, 1 kHz at Max SPLSignal to Noise Ratio: 83 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 3.2 mA typicalWeight: 5.0 oz (143 g)Dimensions: 5.85" (148.5 mm) long, 1.02" (26.0 mm) maximum diameterOutput Connector: Integral 3-pin XLRM-type

The rich, warm sound takes you back to the classic F.E.T. studio microphones. But there’s nothing remotely old-fashioned about the technology behind that vintage sound. The AT4047/SV studio condenser’s dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range. With a wide dynamic range, incredibly low self-noise and high SPL capability, this versatile microphone excels on vocals, strings, acoustic guitar, instrument ensembles, small vocal groups and voiceovers. Specifications:Element: Externally-polarized (DC bias) condenserPolar Pattern: CardioidFrequency Response: 20-18,000 HzLow Frequency Roll-Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: -35 dB (17.7 mV) dB re 1V at 1 PaImpedance: 250 ohmsMaximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D., 159 dB SPL, with 10 dB pad (nominal)Noise: 9 dB SPLDynamic Range (typical): 140 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 85 dB, 1 kHz at 1 PaPhantom Power Requirements: 48V DC, 3.0 mA typicalSwitches: Flat, roll-off, 10 dB pad (nominal)Weight: 14.5 oz (410 g)Dimensions: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameterOutput Connector: Integral 3-pin XLRM-type

The AT5040 Studio Vocal Microphone by Audio-Technica marks the debut of their flagship 50 Series of microphones. In addition to vocals, its fast transient response make it ideal for acoustic instruments. Each AT5040 is hand-assembled and individually inspected to ensure the finest quality audio capture.The AT5040 employs a four-part rectangular element to provide purity of sound. Each of the four parts function together and get proprietarily summed to output. This provides a surface area twice the size of a standard one-inch circular diaphragm. Additionally, the AT5040 features an advanced internal shockmounting system, effectively decoupling the capsule from the housing for vibration-free performance.The Audio-Technica AT5040's frequency response chart reflects the company's claim of an "extremely smooth top end with controlled sibilance." A dip of approximately 3dB occurs between 4.5kHz and 8.5kHz, a prime "s" location. The microphone's reactivity slowly tapers after the 10kHz mark. An approximate 2 to 3dB boost in response below 80Hz could create a pleasant promiximity effect on a male vocalist, then rolled off to taste in mixing.Specifications:Element Type: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Cardioid Frequency Response: 20 to 20,000 Hz Open Circuit Sensitivity: -25 dB (56.2 mV) re 1V at 1 Pa Impedance: 50Ω Maximum Input Level: 142 dB SPL, 1 kHz at 1% T.H.D. Noise: 5 dB SPL (typical, A-weighted) Dynamic Range (Typical): 137 dB, 1 kHz at max SPL Signal-to-Noise Ratio: 89 dB, 1 kHz at 1 Pa Phantom Power Requirements: 48V DC, 3.8 mA typical Output Connector: Integral 3-pin XLRM-type Case Form Factor: Audio-Technica R10 Dimensions (Ø x L): 2.24 x 6.51" (57 x 165.3 mm) Weight: 20.5 oz (582 g)

The multi-pattern Audio-Technica AT4047MP Condenser Microphone delivers vintage sound while offering selectable omnidirectional, cardioid, and figure-8 polar patterns. The AT4047MP microphone's transformer-coupled output and specially tuned element provide sonic characteristics reminiscent of early F.E.T. studio microphone designs. With a wide dynamic range, incredibly low self-noise and high SPL capability, the versatile Audio Technica AT4047MP microphone excels on vocals, strings, acoustic guitar, instrument ensembles, small vocal groups, and voiceovers.Features:Three switchable polar patterns: cardioid, omnidirectional, figure-of-eightEngineered to meet the critical acoustic requirements of professional recording, broadcast, and sound reinforcementTransformer-coupled output and specially tuned element provide sonic characteristics reminiscent of early F.E.T. studio microphone designsExceptionally low self-noise, wide dynamic range and high SPL capabilityDual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphonePrecision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivityVintage silver-matte finish on microphone and shock mountOpen acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflectionsCustom shock mount provides superior isolationIntegral 80Hz high-pass filter switch and 10dB pad switchSpecifications:Element: Externally-polarized (DC bias) condenserPolar Pattern: Cardioid, Omnidirectional, Figure-of-eightFrequency Response: 20-18,000HzLow Frequency Roll-Off: 80Hz, 12dB/octaveOpen Circuit Sensitivity: -42dB (7.9 mV), re 1V at 1 PaImpedance: 100 ohmsMaximum Input Sound Level: 155dB SPL, 1 kHz at 1% THD; 165dB SPL, with 10dB pad (nominal)Noise: 14dBDynamic Range (Typical): 141dB, 1kHz at Max SPLSignal-To-Noise Ratio: 80dB, 1kHz at 1 PaPhantom Power Requirements: 48V DC, 3.4 mA typicalSwitches: Polar selection; Flat, roll-off, 10dB pad (nominal)Weight: 524g (18.5oz.)Dimensions: 188.0mm (7.40") long, 53.4mm (2.10") maximum body diameterOutput Connector: Integral 3-pin XLRM-typeAudi-Technica Case Style: R1

The Audio-Technica ATH-M40x are closed-back professional M-Series monitor headphones, tuned flat for accurate response across the entire range. They are the choice for anyone who wants to hear the mix exactly as it is, without colouration, in the studio, on stage or at home.With 40 mm drivers, swivelling earcups, a collapsible build and two detachable cables, they combine accuracy, comfort and durability.

The Audio-Technica ATH-M20x are closed-back professional monitor headphones and the entry point to the acclaimed M-Series. They are designed for studio tracking and mixing, as well as podcasting, home studios and everyday listening, offering comfort and good isolation at a very accessible price.40 mm drivers with neodymium magnets deliver clear sound with enhanced low-frequency performance, while the closed circumaural design isolates you from ambient noise.

Ideal for critical studio and live applications, the low-profile AT4021 offers a flat, extended frequency response, high maximum SPL and wide dynamic range. Its low self-noise is perfectly suited for the most sophisticated recording equipment. Its low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer. The microphone offers outstanding reproduction of low-frequency sounds. Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 20-20,000 HzLow Frequency Roll-Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 PaImpedance: 250 ohmsMaximum Input Sound Level: 146 dB SPL, 1 kHz at 1% T.H.D., 156 dB SPL, with 10 dB pad (nominal)Noise: 14 dB SPLDynamic Range (typical): 132 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 80 dB, 1 kHz at 1 PaPhantom Power Requirements: 48V DC, 3.0 mA typicalSwitches: Flat, roll-off  10 dB padWeight: 119 g (4.2 oz)Dimensions: 144.0 mm (5.67") long, 21.0 mm (0.83") maximum body diameterOutput Connector: Integral 3-pin XLRM-type

The Audio-Technica AT2020 is a side-address cardioid condenser microphone and a benchmark for price and performance. It is ideal for home and project studios, for recording vocals, acoustic instruments, podcasts and streaming.Its low-mass diaphragm delivers extended frequency response and fast transient response, while it handles high sound pressure levels with a wide dynamic range.

Meet the studio condenser that captures every nuance. With three switchable polar patterns, the large-diaphragm Audio-Technica AT4050SM exhibits a remarkable combination of qualities: high-SPL capability with transparent and airy uppers/mids complemented by rich low-end qualities. Its dual large diaphragms are gold-vaporized and aged for consistent, outstanding performance. A precision-machined, nickel-plated brass acoustic element baffle provides rock-solid element stability and exceptional sensitivity. Supplied with AT8449 shockmount. Also available as the AT4050SC with the AT8430 isolation stand clamp.Ideal for studio use and live sound productions with vocals, piano, strings, drum overheads, guitar amps, and more.  Transparent uppers/mids balanced by rich low-end qualities combine with advanced acoustic engineering for extensive performance capabilities and highest quality  Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone  The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of use  Three switchable polar patterns: omni, cardioid, figure-of-eight  Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients  State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards  Switchable 80 Hz hi-pass filter and 10 dB pad  Custom shock mount provides superior isolation  Also available as the AT4050SC with the AT8430 isolation stand clamp

Audio-TechnicaΆs high-performance AE4100 cardioid dynamic vocal microphone delivers aggressive sound that stays up-front in the mix. Optimized for the stage, the microphone features superior anti-shock engineering for minimum handling noise. Its rugged construction is engineered to stand up to the rigors of touring. For ultimate protection against vocal plosives, the micΆs hardened-steel outer grille is lined with fine steel mesh and a layer of open-cell foam. A foam disk positioned on top of the element assembly provides the final layer of “pop” protection.ELEMENT DynamicPOLAR PATTERN CardioidFREQUENCY RESPONSE 90-18,000 HzOPEN CIRCUIT SENSITIVITY -55 dB (1.7 mV) re 1V at 1 PaIMPEDANCE 250 ohmsWEIGHT 10.9 oz (310 g)DIMENSIONS 6.97" (177.0 mm) long,1.89" (48.0 mm) head diameter,1.30" to 0.87" (33.0 to 22.0 mm) tapered body diameterOUTPUT CONNECTOR Integral 3-pin XLRM-type

The ATM230 hypercardioid instrument microphone brings a compact drum model to Audio-Technica’s popular Artist Series line. The mic’s proprietary capsule is designed to excel in high SPL applications, delivering full, well-rounded audio with an exceptional low-end. The hypercardioid polar pattern keeps the focus on the sound source, directionality that is aided by the mic’s low-profile design, which allows it to be placed in a wide variety of setups. All this makes the ATM230 ideally suited for miking toms, snare and other percussion instruments. The ATM230 features rugged metal construction that stands up to the rigors of live and studio applications, and comes with an AT8665 drum mount and a protective pouch.  Specifications:Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceHandles very high SPL at close rangeBig, warm low-frequency response with excellent attackLow-profile design permits versatile placement around drum kitRugged, all-metal design and construction for years of trouble-free useIncludes AT8665 drum mount and a soft protective pouchElement: DynamicPolar Pattern: HypercardioidFrequency Response: 30-12,000 HzOpen Circuit Sensitivity: –54 Db (1.9 Mv) Re 1v At 1 PaImpedance: 600 OhmsWeight: 292 G (10.3 Oz)Dimensions: 82.5 Mm (3.2") Long, 38.0 Mm (1.5") Maximum Diameter

This cardioid dynamic step-up is built to survive the realities of day-to-day use and still produce clear, full-range vocal reproduction every time. Its superior internal shock mounting reduces handling noise. The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.Features:Natural, full-range vocal reproduction; ideal for close-up vocal use in performanceSuperior internal shock mounting reduces handling noiseCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceHi-ENERGY® neodymium magnet for articulate vocal reproductionTwo-stage ball-type headcase for superior "pop" protectionMagnaLock™ on/off switchCorrosion-resistant contacts from gold-plated XLRM-type connectorRugged design and construction for reliable performanceSpecifications:Element: DynamicPolar Pattern: CardioidFrequency Response: 90-16,000 HzOpen Circuit Sensitivity: -55 Db (1.7 Mv) Re 1v At 1 PaImpedance: 300 OhmsSwitch: Magnalock™ On/offWeight: 10.7 Oz (304 G)Dimensions: 7.28" (185.0 Mm) Long, 2.09" (53.1 Mm) Head DiameterOutput Connector: Integral 3-pin Xlrm-typeCable: 15.0' (4.5 M) Cable With Xlrf-type Connector At Microphone End, Xlrm-type Connector At Equipment EndAccessories Furnished: At8470 Quiet-flex™ Stand Clamp For 5/8"-27 Threaded Stands; 5/8"-27 To 3/8"-16 Threaded Adapter; Soft Protective Pouch

Terminated with locking 4-pin connector for A-T UniPak® body-pack wireless transmitters. 55" (1.4 m) cable. Includes windscreen and clothing clip. See MT830R.

The Audio-Technica PRO49QL is a cardioid condenser microphone with a double gooseneck that plugs directly into any standard XLRF-type surface or cable connector. Ideal for lecterns, conference tables, houses of worship and event venues.Clear, natural speechA flat, smooth frequency response and a low-mass diaphragm element deliver clear, intelligible voice. The cardioid polar pattern reduces pickup of sounds from the sides and rear, limiting room noise and feedback.Quiet, durable gooseneckThe 418 mm gooseneck holds its position silently, and the electronics are built into the body, with no external preamp. It runs on 9–52 V DC phantom power.

Ideal for conference centers, boardrooms, courtrooms, houses of worship, and other installed applications, the U857Q is designed to plug directly into a panel- or desk-mounted XLRF-type connector. This cardioid condenser quick-mount gooseneck microphone offers unsurpassed immunity from radio frequency interference thanks to Audio-Technica's UniGuard innovations. The 14.47" long microphone features an ultra-flexible small-diameter gooseneck and accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine line cardioid polar patterns. Equipped with self-contained electronics, the phantom-powered microphone also offers an 80 Hz low-cut UniSteep filter that reduces pickup of low-frequency ambient noise.Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 30-20,000 HzLow Frequency Roll Off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: 39 dB (11.2 mV) re 1V at 1 PaImpedance: 250 ohmsMaximum Input Sound Level: 139 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 115 dB, 1 kHz at Max SPLSignal to Noise Ratio: 70 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 2 mA typicalSwitch: Flat, roll-offWeight: 5.1 oz (144 g)Dimensions: 14.37" (365.0 mm) long, 0.48" (12.2 mm) head diameter, 0.74" (18.9 mm) base diameterOutput Connector: Integral 3-pin XLRM-type

The 18.94" version of the U857Q, the U857QL cardioid condenser quick-mount gooseneck microphone is designed to plug directly into a panel- or desk-mounted XLRF-type connector. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations. It features an ultra-flexible small-diameter gooseneck and accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine line cardioid polar patterns. Equipped with self-contained electronics, the phantom-powered microphone also offers an 80 Hz low-cut UniSteep filter that reduces pickup of low-frequency ambient noise.Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 30-20,000 HzLow Frequency Roll Off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: 39 dB (11.2 mV) re 1V at 1 PaImpedance: 250 ohmsMaximum Input Sound Level: 139 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 115 dB, 1 kHz at Max SPLSignal to Noise Ratio: 70 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 2 mA typicalSwitch: Flat, roll-offWeight: 5.3 oz (150 g)Dimensions: 18.94" (481.0 mm) long, 0.48" (12.2 mm) head diameter, 0.74" (18.9 mm) base diameterOutput Connector: Integral 3-pin XLRM-type

With advanced capsule design coupled with carefully engineered internal electronics, the U857QLU UniLine condenser delivers clear, consistent sound for a variety of installed applications. The 23.74" version of U857QU, the U857QLU features Audio-Technica’s UniLine line-cardioid element. The microphone is designed to plug directly into a panel- or desk-mounted XLRF-type connector. Its ultra-flexible, robust gooseneck permits easy adjustment into desired shape while resisting inadvertent repositioning.Featuring UniGuard innovations that offer unsurpassed immunity from radio frequency interference, the U857QLU accepts new interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine line cardioid polar patterns. The phantom-powered microphone also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: Line CardioidFrequency Response: 30-20,000 HzLow Frequency Roll Off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: –35 dB (17.7 mV) re 1V at 1 PaImpedance: 250 ohmsMaximum Input Sound Level: 135 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 115 dB, 1 kHz at Max SPLSignal to Noise Ratio: 74 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 2 mA typicalSwitch: Flat, roll-offWeight: 5.9 oz (167 g)Dimensions: 23.74" (603.0 mm) long, 0.48" (12.2 mm) head diameter, 0.74" (18.9 mm) base diameterOutput Connector: Integral 3-pin XLRM-type

The Audio-Technica AE6100 is a dynamic mic that delivers great presence and sound that cuts through monitor mixes. The AE6100 microphone has high output for fast transients and clean articulation. Maximum feedback and pop rejection. Tough, durable construction for road use.Features:Great presence with excellent monitor cutHigh output, fast transients, and clean articulationMaximum feedback rejectionSuperior anti-shock engineering for low handling noiseOutstanding pop protectionSpecifications:Element: dynamicPolar pattern: hypercardioidFrequency response: 60Hz-15kHzOpen-circuit sensitivity: -55dB (1.7mV) re 1v @ 1PaImpedance: 250 ohmsWeight: 10.9 oz.Output connector: XLRM

The new AT2010 is designed to bring the studio-quality articulation and intelligibility of Audio-Technica's renowned 20 Series to the stage, for crystal-clear vocal performances. Featuring the same 16 mm low-mass diaphragm found in the critically acclaimed AT2020 side-address studio condenser, the AT2010 excels wherever articulate vocals are needed: in houses of worship, for solo performances, jazz vocalists, singer/songwriters, and more.Specifications:Element: Fixed-charge back plate permanently polarized condenserPolar Pattern: CardioidFrequency Response: 40-20,000 HzOpen Circuit Sensitivity: 48 dB (3.9 mV) re 1V at 1 PaImpedance: 100 ohmsMaximum Input Sound Level: 136 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 113 dB, 1 kHz at Max SPLSignal to Noise Ratio: 71 dB, 1 kHz at 1 PaPhantom Power Requiremens: 48V DC, 2 mA typicalWeight: 233 g (8.2 oz)Dimensions: 179.1 mm (7.05") long, 50.8 mm (2.00") maximum body diameterOutput Connector: Integral 3-pin XLRM-type

Equipped with newly designed internal shock mounting for reduced handling and stage noise, the ATM510 from Audio-Technica is designed for smooth, natural vocal reproduction and low noise. This cardioid dynamic workhorse features super-durable construction for long-lasting performance, a rare-earth magnet for high output, and a multi-stage grille design for excellent protection against plosives. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, maximizing isolation from other sound sources and minimizing feedback. The ATM510 is enclosed in a rugged housing, and its multi-stage windscreen effectively controls popping, distortion from sibilant sounds and wind noise. The included AT8470 Quiet-FlexTM stand clamp permits mounting on any microphone stand with 5/8"-27 threads.Features:Newly designed internal shock mounting reduces handling and stage noiseTailored for smooth, natural vocal reproductionCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceDurable performance for professional applicationsRare-earth magnet for improved output and transient responseExcellent off-axis rejection for minimum feedbackMulti-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarityQuiet-Flex stand clamp provides silent, flexible microphone positioningCorrosion-resistant contacts from gold-plated XLRM-type connectorSpecfications:Element: DynamicPolar Pattern: CardioidFrequency Response: 90Hz-16kHzOpen Circuit Sensitivity: –55 dB (1.7 mV) re 1V at 1 PaImpedance: 300 ohmsWeight: .57 lb. (9.1 oz.)Dimensions: 6-11/16" (170mm) long; 2-1/8" (53.7mm) diameterOutput Connector: Integral 3-pin XLRM-typeAccessories: AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouchAudio-Technica Case Style: T6

Tuned for clear, detailed, extended-range reproduction of lead and backup vocals, the ATM610 Hypercardioid dynamic vocal mic is equipped with a rare earth neodymium magnet, a tight hypercardioid polar pattern and multi-stage grille design. The Audio Technica microphone features an innovative dual-wall floating construction; the back-cavity assembly "floats" inside the handle shell, providing outstanding isolation from handling noise. Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source.Features:Durable performance for professional applicationsSpecial dual-wall floating construction reduces handling noise and assures consistent performance from mic to micHi-Energy neodymium magnet for articulate vocal reproductionMulti-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarityQuiet-Flex stand clamp provides silent, flexible microphone positioningCorrosion-resistant contacts from gold-plated XLRM-type connectorRugged, all-metal design and construction for years of trouble-free useSpecifications:Element: DynamicPolar pattern: HypercardioidFrequency response: 40-16,000 HzOpen circuit sensitivity: —55 dB (1.7 mV) re 1V at 1 PaImpedance: 300 ohmsWeight: 280 g (9.9 oz)Dimensions: 177.0 mm (6.97") long, 48.0 mm (1.89") diameterOutput connector: Integral 3-pin XLRM-typeAccessories furnished: AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouchAudio-technica case style: T6

The Audio Technica AT8031 microphone is ideal for close-up interviews, vocals, overheads, piano, and strings. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source. The mic's proximity effect provides added warmth when used close up. Features include a large protective screen that reduces "popping" and sibilant distortion. It operates on battery or phantom power.Features:Ideal for close-up vocals, overheads, piano and stringsLow-mass diaphragm ensures minimum distortionCardioid pattern provides added warmth when used close upOperates on battery or phantom powerRoHS compliant free from all substances specified in the EU directive on hazardous substancesSpecifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 30-20,000 HzLow Frequency Roll-off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: Phantom —44 dB (11.2 mV) re 1V at 1 Pa, Battery —45 dB (10.0 mV) re 1V at 1 PaImpedance: Phantom 250 ohms; Battery 300 ohmsMaximum Input Sound Level: Phantom 137 dB, 1 kHz at 1% T.H.D., Battery 123 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range (Typical): Phantom 113 dB, 1 kHz at Max SPL, Battery 99 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 70 dB, 1 kHz at 1 PaPhantom Power Requirements: 11-52V DC, 2 mA typicalBattery Type: 1.5V AA/UM3Battery Current/Life: 0.4 mA / 1200 hours typical (alkaline)Switch: Flat, roll-offWeight: 7.2 oz (205 g)Dimensions: 7.60" (193.0 mm) long, 1.98" (50.3 mm) head diameterOutput Connector: Integral 3-pin XLRM-typeAccessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8114 windscreen; battery; soft protective pouchAudio Technica Case Style: S7

Natural and articulate vocal reproduction when clipped on with the included Lavalier clip and equally impressive guitar reproduction when used with the included instrument adapter. Cardioid polar pattern reduces pickup of sound from the sides and rear. Switchable low-frequency roll-off minimizes rumble and boominess. Gold-plated XLRM-type connector resists corrosion and provides faultless signal. Operates on battery or phantom power. 6' cable permanently attached between the mic and power module.Features:Condenser elementCardioid pattern100 - 14,000 Hz response123 dB SPL, 1 kHz at 1% THDAT8411 clothing clipAT8444 instrument adapterWindscreenPower module (attached)Battery

Terminated with locking 4-pin connector for A-T UniPak body-pack wireless transmitters. 55" (1.4 m) cable. Includes windscreen and clothing clip.

Miniature cardioid condenser microphone only, terminated for use with PRO 88W transmitter. 55" (1.4 m) cable. Includes clothing clip and windscreen.

The Audio-Technica PRO45 is a cardioid hanging condenser microphone with robust construction and an unobtrusive appearance. It is ideal for sound reinforcement and recording of speech, theatre, orchestra and choir, suspended from the ceiling above the stage.High SPL handlingWith a maximum input level of 134 dB SPL and a flat, smooth response, it reproduces a choir or orchestra naturally.Easy installationSelf-contained electronics mean no external power module, and the 7.6 m cable is permanently attached with an XLR connector. A windscreen and steel hanger are included.

Delivers a warm low-frequency response with excellent presence. Hypercardioid polar pattern improves isolation of desired sound source. Superior off-axis rejection for maximum gain before feedback. Versatile mounting options and effective dampening of mechanical noise thanks to included AT8471 isolation clamp. Rugged design and construction for reliable performance.Features:Dynamic elementHypercardioid pattern30-12,000Hz frequency responseIsolation clamp5/8" to 3/8" threaded adapterSpecifications:Open Circuit Sensitivity: -54 dB (1.9 mV) re 1V at 1 Pa600 ohms impedance8.1 oz.XLRM-type output connector.

With robust construction and unobtrusive appearance, the PRO45 and PRO45W offer versatile sound-reinforcement solutions for speech, theater, orchestra and choir sound reinforcement and recording. The microphones high-SPL handling is perfect for suspension over choirs and orchestras. Available in two colors: Black (PRO45), white (PRO45W).Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 70-16,000 HzOpen Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 PaImpedance: 100 ohmsMaximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 106 dB, 1 kHz at Max SPLSignal to Noise Ratio: 66 dB, 1 kHz at 1 PaPhantom Power Requiremens: 9-52V DC, 2 mA typicalWeight: 0.5 oz (15 g)Dimensions: 2.24" (56.9 mm) long, 0.47" (12.0 mm) head diameterOutput Connector: 3-pin XLRM-type on cableCable: 25' (7.6 m) long, permanently attached

The Audio-Technica PRO 35 clip-on microphone is designed for sax, brass, toms, and percussion. The PRO35 is a cardioid condenser mic that excels in high-SPL (sound pressure level) applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance. The included UniMount clip permits accurate positioning and provides shock resistance while protecting the element. The microphone's cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source. Features:Ideal for sax, toms, brass and percussionExcels in high-SPL applicationsIdeal for active stage performancesUniMount clip permits accurate positioning, provides shock resistance and protects elementCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceExtended frequency response captures subtle nuances of the performance6' (1.8 m) cable permanently attached between microphone and power module

The ATM250DE dual-element instrument microphone features cardioid condenser and hypercardioid dynamic capsules combined in a single housing. Audio-Technica’s innovative use of two polar patterns is ideal for kick drum: the hypercardioid dynamic element focuses tightly on the aggressive attack of the beater, while the condenser captures the round tonalities of the shell. The elements are positioned in a perfect phase relationship, something practically impossible to achieve with two separate microphones. Includes a professional isolation clamp to provide secure mounting, versatile positioning and effective dampening of unwanted mechanical noise. Specifications:Elements: Condenser, dynamicPolar Patterns: Cardioid (condenser), Hypercardioid (dynamic)Frequency Response: 40-20,000 Hz (condenser), 40-15,000 Hz (dynamic)Low Frequency Roll-Off: 80 Hz, 12 dB/octave (condenser)Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa (condenser), –53 dB (2.2 mV) re 1V at 1 Pa (dynamic)Impedance: 50 ohms (condenser), 600 ohms (dynamic)Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D. (condenser)Dynamic Range (typical): 122 dB, 1 kHz at Max SPL (condenser)Signal-To-Noise Ratio: 68 dB, 1 kHz at 1 Pa (condenser)Phantom Power Requirements: 11-52V DC, 3.5 mA typical (condenser)Switches: Flat, roll-off; 10 dB pad (condenser only)Weight: 320 g (11.3 oz)Dimensions: 143.6 mm (5.65") long, 55.0 mm (2.17") diameterOutput Connector: Integral 5-pin XLRM-typeCable: 5.0 m (16.5') dual shielded, 8-conductor cable, 5-pin XLRF-type connector at microphone, two 3-pin XLRM-type output connectors

The ATM650 is a versatile addition to the Artist Series featuring a new multi-stage flat grille design for precise positioning close to the sound source. Equipped with a neodymium magnet for high-output performance, the ATM650 has a frequency response tailored for clear sound reproduction of guitar cabinets, snare and percussion. A-T's innovative dual-wall floating construction banishes handling noise.Features:Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceDurable performance for professional applicationsSpecial dual-wall floating construction reduces handling noise and assures consistent performance from mic to micHi-ENERGY neodymium magnet for improved output and transient responseMulti-stage flat grille design is engineered to enable easy placement as close as possible to sound sourceCorrosion-resistant contacts from gold-plated XLRM-type connectorRugged, all-metal design and construction for years of trouble-free useSpecifications:Element: DynamicPolar Pattern: HypercardioidFrequency Response: 80-17,000 HzOpen Circuit Sensitivity: —56 dB (1.5 mV) re 1V at 1 PaImpedance: 300 ohmsWeight: 279 g (9.8 oz)Dimensions: 164.2 mm (6.46") long, 38.8 mm (1.53") diameterOutput Connector: Integral 3-pin XLRM-typeAudio-Technica Case Style: T5

Audio-Technica's PRO92cW wireless omnidirectional condenser headworn microphone offers a natural, smooth frequency response optimized for vocal articulation. The mic features a small condenser capsule; a lightweight, contoured earpiece; and a flexible boom that is easily repositioned for a comfortable fit. Terminated to fit Audio-Technica wireless systems, the PRO92cW is available in black or beige.Specifications:Comfortable headset is ideal for lecturers and other applications requiring clear, articulate vocal projectionFlexible, contoured earpiece hooks over either ear for a comfortable fitNatural smooth frequency response optimized for vocal articulationRugged construction designed to stand up to the challenges of day-to-day useIncludes storage pouch and clothing clipAvailable in black and beige models

Audio Technica Pro 8 U dynamic Headset Mic for Aerobic 4 pd connector for Audio Technica Wireless System.

Terminated with locking 4-pin connector for A-T UniPak body-pack wireless transmitters. 55" (1.4 m) cable. Includes windscreen.

Ideal for drummers, keyboard players or anyone requiring hands-free operation, the ATM73a features a comfortable, unobtrusive headband design with side-of-mouth pickup. Its belt-mounted power module operates on battery or phantom power.Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 40-15,000 HzLow Frequency Roll Off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: PHANTOM: -55 dB (1.7 mV) re 1V at 1 Pa BATTERY: -56 dB (1.5 mV) re 1V at 1 PaImpedance: PHANTOM: 200 ohms BATTERY: 270 ohmsMaximum Input Sound Level: PHANTOM: 146 dB SPL, 1 kHz at 1% T.H.D. BATTERY: 132 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: PHANTOM: 111 dB, 1 kHz at Max SPL BATTERY: 97 dB, 1 kHz at Max SPLSignal to Noise Ratio: 59 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 2 mA typicalBattery Type: 1.5V AA/UM3Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)Switch: Off, on-flat, on-roll-offCable: 4.6' (1.4 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor shielded cable with TA3F-type connector

Terminated with locking 4-pin connector for A-T UniPak body-pack wireless transmitters. 55" (1.4 m) cable. Includes windscreens.Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 40-15,000 HzLow Frequency Roll Off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: PHANTOM: -55 dB (1.7 mV) re 1V at 1 Pa BATTERY: -56 dB (1.5 mV) re 1V at 1 PaImpedance: PHANTOM: 200 ohms BATTERY: 270 ohmsMaximum Input Sound Level: PHANTOM: 146 dB SPL, 1 kHz at 1% T.H.D. BATTERY: 132 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: PHANTOM: 111 dB, 1 kHz at Max SPL BATTERY: 97 dB, 1 kHz at Max SPLSignal to Noise Ratio: 59 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 2 mA typicalBattery Type: 1.5V AA/UM3Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)Switch: Off, on-flat, on-roll-offCable: 4.6' (1.4 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor shielded cable with TA3F-type connector

The new Engineered Sound. Contractor-exclusive innovations for every acoustical challenge. And safe haven from RFI.This low-profile omnidirectional condenser boundary microphone is designed for clear, highly intelligible sound reinforcement, professional recording and teleconferencing in table-, ceiling-, or panel-mount applications. The microphone is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module. The microphone offers unsurpassed immunity from radio frequency interference thanks to Audio-Technica’s UniGuard® innovations. Protected by a rugged all-metal case with a two-layer steel mesh grille, the microphone has a 360° pickup angle, and is available in two colors: black (ES945) and white (ES945W). Specifications: Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Omnidirectional Freq Response: 40-18,000 Hz Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa Impedance: 200 ohms Max Input Sound Level: 142 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range (typical): 112 dB, 1 kHz at Max SPL Signal to Noise Ratio: 64 dB, 1 kHz at 1 Pa Phantom Power Requirements: 11-52V DC, 2 mA typical Weight: 63 g (2.2 oz) Dimensions(LxWxH): 69.0 mm (2.72") long, 28.0 mm (1.10") diameter Output Connector: Integral 3-pin XLRM-type