Audio Technica

Designed to deliver easy, flexible control in conference and boardroom installations, the versatile U891R cardioid condenser boundary microphone features an activation switch that can be set to three modes: press-on/press-off, press to talk, and press to mute. The phantom-powered microphone is equipped with a unique PivotPoint® rotating output connector and an LED status indicator. UniGuard innovations offer unsurpassed immunity from radio frequency interference interchangeable elements are available in cardioid, hypercardioid and omnidirectional polar patterns; an 80 Hz low-cut UniSteep  filter reduces pickup of low-frequency ambient noise. The microphone’s heavy die-cast case and silicon foam bottom pads minimize coupling of surface vibration to the microphone. The unit’s self-contained electronics eliminate the need for an external power module.Specifications: Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface) Freq Response: 30-20,000 Hz Low Freq Roll-Off: 80 Hz, 18 dB/octave Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa Impedance: 200 ohms Max Input Sound Level: 130 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range: 104 dB, 1 kHz at Max SPL Signal to Noise Ratio: 68 dB, 1 kHz at 1 Pa Phantom Power Requirements: 11-52V DC, 4 mA typical Weight: 264 g (9.3 oz) Dimensions(LxWxH): 4.25 x 3.31 x 0.91 inches Output Connector: TB3M-type Cable: 25 feet long, 2-conductor, shielded cable with TA3F-type and XLRM-type connectors

The new Engineered Sound. Contractor-exclusive innovations for every acoustical challenge. And safe haven from RFI.This low-profile omnidirectional condenser boundary microphone is designed for clear, highly intelligible sound reinforcement, professional recording and teleconferencing in table-, ceiling-, or panel-mount applications. The microphone is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module. The microphone offers unsurpassed immunity from radio frequency interference thanks to Audio-Technica’s UniGuard® innovations. Protected by a rugged all-metal case with a two-layer steel mesh grille, the microphone has a 360° pickup angle, and is available in two colors: black (ES945) and white (ES945W). Specifications: Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Omnidirectional Freq Response: 40-18,000 Hz Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa Impedance: 200 ohms Max Input Sound Level: 142 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range (typical): 112 dB, 1 kHz at Max SPL Signal to Noise Ratio: 64 dB, 1 kHz at 1 Pa Phantom Power Requirements: 11-52V DC, 2 mA typical Weight: 63 g (2.2 oz) Dimensions(LxWxH): 69.0 mm (2.72") long, 28.0 mm (1.10") diameter Output Connector: Integral 3-pin XLRM-type

The new Engineered Sound. Contractor-exclusive innovations for every acoustical challenge. And safe haven from RFI.This low-profile omnidirectional condenser boundary microphone is designed for clear, highly intelligible sound reinforcement, professional recording and teleconferencing in table-, ceiling-, or panel-mount applications. The microphone is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module. The microphone offers unsurpassed immunity from radio frequency interference thanks to Audio-Technica’s UniGuard® innovations. Protected by a rugged all-metal case with a two-layer steel mesh grille, the microphone has a 360° pickup angle, and is available in two colors: black (ES945) and white (ES945W). Specifications: Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Omnidirectional Freq Response: 40-18,000 Hz Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa Impedance: 200 ohms Max Input Sound Level: 142 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range (typical): 112 dB, 1 kHz at Max SPL Signal to Noise Ratio: 64 dB, 1 kHz at 1 Pa Phantom Power Requirements: 11-52V DC, 2 mA typical Weight: 63 g (2.2 oz) Dimensions(LxWxH): 69.0 mm (2.72") long, 28.0 mm (1.10") diameter Output Connector: Integral 3-pin XLRM-type

The phantom-powered U851Rb condenser boundary microphone offers outstanding speech intelligibility and transparent sound quality for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing, and other demanding sound pickup situations. The microphone is equipped with a PivotPoint® rotating output connector, UniSteep® filter, and UniGuard® RFI-shielding technology. It accepts interchangeable condenser elements – omnidirectional (360°), cardioid (120°), and hypercardioid (100°) – available separately. With a heavy die-cast case and silicon foam bottom pads to minimize coupling of surface vibration to the microphone, the U851Rb is equipped with self-contained electronics, eliminating the need for an external power module. Threaded inserts on the bottom of the microphone allow it to be mounted with screws for increased security. Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)Frequency Response: 20-20,000 HzLow Frequency Roll Off: 80 Hz, 18 dB/octave

Audio-Technica's PRO92cW wireless omnidirectional condenser headworn microphone offers a natural, smooth frequency response optimized for vocal articulation. The mic features a small condenser capsule; a lightweight, contoured earpiece; and a flexible boom that is easily repositioned for a comfortable fit. Terminated to fit Audio-Technica wireless systems, the PRO92cW is available in black or beige.Specifications:Comfortable headset is ideal for lecturers and other applications requiring clear, articulate vocal projectionFlexible, contoured earpiece hooks over either ear for a comfortable fitNatural smooth frequency response optimized for vocal articulationRugged construction designed to stand up to the challenges of day-to-day useIncludes storage pouch and clothing clipAvailable in black and beige models

The Audio-Technica PRO 31 microphone has a cardioid polar pattern that reduces sound pickup s from the sides and rear, improving isolation of the desired sound source. Hi-ENERGY neodymium magnet for high output and articulate vocal reproduction. 2-stage ball-type headcase for superior "pop" protection. MagnaLock on/off switch. Corrosion-resistant contacts from gold-plated XLRM-type connector. Rugged design and construction for reliable performance.Features:Dynamic element60-13,000Hz frequency responseXLRM-type output connectorQuiet-Flex stand clamp5/8" to 3/8" threaded adapter15' cable XLRF-XLRMSpecifications:    Element: Dynamic    Polar Pattern: Cardioid    Frequency Response: 60-13,000 Hz    Open Circuit Sensitivity: -55 dB (1.7 mV) re 1V at 1 Pa    Impedance: 600 ohms    Switch: MagnaLock™ on/off    Weight: 11.0 oz (312 g)    Dimensions: 7.28" (185.0 mm) long, 2.09" (53.1 mm) head diameter    Output Connector: Integral 3-pin XLRM-type    Cable: 15.0' (4.5 m) cable with XLRF-type connector at microphone end, XLRM-type connector at equipment end

The Audio-Technica AE6100 is a dynamic mic that delivers great presence and sound that cuts through monitor mixes. The AE6100 microphone has high output for fast transients and clean articulation. Maximum feedback and pop rejection. Tough, durable construction for road use.Features:Great presence with excellent monitor cutHigh output, fast transients, and clean articulationMaximum feedback rejectionSuperior anti-shock engineering for low handling noiseOutstanding pop protectionSpecifications:Element: dynamicPolar pattern: hypercardioidFrequency response: 60Hz-15kHzOpen-circuit sensitivity: -55dB (1.7mV) re 1v @ 1PaImpedance: 250 ohmsWeight: 10.9 oz.Output connector: XLRM

The Audio-Technica PRO 61 is an exceptional vocal stage microphone. A dynamic mic that delivers outstanding gain before feedback, the PRO 61 has plenty of the presence needed for lead vocals. Its hypercardioid polar pattern improves isolation of the voice from surrounding sounds. The PRO 61 mic's superior internal shock mounting eliminates handling noise. A neodymium magnet yields the articulate reproduction needed for vocal use. Rugged Audio-Technica design and construction assure that the PRO 61 will serve you reliably with a long use life. Features:Excellent gain before feedbackOutstanding stage presence for lead and back-up vocalsExtended frequency response for optimal clarity and smooth, natural sonic characteristicsHypercardioid polar pattern improves isolation of desired sound sourceSuperior internal shock mounting reduces handling noiseHi-ENERGY neodymium magnet for articulate vocal reproduction2-stage ball-type headcase for superior "pop" protectionGold-plated XLRM-type connectorRugged design and construction for reliable performanceSpecifications:Element: dynamic ÀImpedance: 300 ohmsPolar Pattern: hypercardioidWeight: 11-3/4 oz (335 g)Frequency Response: 70 - 16,000 HzOutput Connector: XLRM-typeOpen Circuit Sensitivity: -55 dB (1.7 mV) re 1V at 1 Pa

Equipped with newly designed internal shock mounting for reduced handling and stage noise, the ATM510 from Audio-Technica is designed for smooth, natural vocal reproduction and low noise. This cardioid dynamic workhorse features super-durable construction for long-lasting performance, a rare-earth magnet for high output, and a multi-stage grille design for excellent protection against plosives. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, maximizing isolation from other sound sources and minimizing feedback. The ATM510 is enclosed in a rugged housing, and its multi-stage windscreen effectively controls popping, distortion from sibilant sounds and wind noise. The included AT8470 Quiet-FlexTM stand clamp permits mounting on any microphone stand with 5/8"-27 threads.Features:Newly designed internal shock mounting reduces handling and stage noiseTailored for smooth, natural vocal reproductionCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceDurable performance for professional applicationsRare-earth magnet for improved output and transient responseExcellent off-axis rejection for minimum feedbackMulti-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarityQuiet-Flex stand clamp provides silent, flexible microphone positioningCorrosion-resistant contacts from gold-plated XLRM-type connectorSpecfications:Element: DynamicPolar Pattern: CardioidFrequency Response: 90Hz-16kHzOpen Circuit Sensitivity: –55 dB (1.7 mV) re 1V at 1 PaImpedance: 300 ohmsWeight: .57 lb. (9.1 oz.)Dimensions: 6-11/16" (170mm) long; 2-1/8" (53.7mm) diameterOutput Connector: Integral 3-pin XLRM-typeAccessories: AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouchAudio-Technica Case Style: T6

Tuned for clear, detailed, extended-range reproduction of lead and backup vocals, the ATM610 Hypercardioid dynamic vocal mic is equipped with a rare earth neodymium magnet, a tight hypercardioid polar pattern and multi-stage grille design. The Audio Technica microphone features an innovative dual-wall floating construction; the back-cavity assembly "floats" inside the handle shell, providing outstanding isolation from handling noise. Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source.Features:Durable performance for professional applicationsSpecial dual-wall floating construction reduces handling noise and assures consistent performance from mic to micHi-Energy neodymium magnet for articulate vocal reproductionMulti-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarityQuiet-Flex stand clamp provides silent, flexible microphone positioningCorrosion-resistant contacts from gold-plated XLRM-type connectorRugged, all-metal design and construction for years of trouble-free useSpecifications:Element: DynamicPolar pattern: HypercardioidFrequency response: 40-16,000 HzOpen circuit sensitivity: —55 dB (1.7 mV) re 1V at 1 PaImpedance: 300 ohmsWeight: 280 g (9.9 oz)Dimensions: 177.0 mm (6.97") long, 48.0 mm (1.89") diameterOutput connector: Integral 3-pin XLRM-typeAccessories furnished: AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouchAudio-technica case style: T6

The new AT2010 is designed to bring the studio-quality articulation and intelligibility of Audio-Technica's renowned 20 Series to the stage, for crystal-clear vocal performances. Featuring the same 16 mm low-mass diaphragm found in the critically acclaimed AT2020 side-address studio condenser, the AT2010 excels wherever articulate vocals are needed: in houses of worship, for solo performances, jazz vocalists, singer/songwriters, and more.Specifications:Element: Fixed-charge back plate permanently polarized condenserPolar Pattern: CardioidFrequency Response: 40-20,000 HzOpen Circuit Sensitivity: 48 dB (3.9 mV) re 1V at 1 PaImpedance: 100 ohmsMaximum Input Sound Level: 136 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 113 dB, 1 kHz at Max SPLSignal to Noise Ratio: 71 dB, 1 kHz at 1 PaPhantom Power Requiremens: 48V DC, 2 mA typicalWeight: 233 g (8.2 oz)Dimensions: 179.1 mm (7.05") long, 50.8 mm (2.00") maximum body diameterOutput Connector: Integral 3-pin XLRM-type

The Audio Technica AT8031 microphone is ideal for close-up interviews, vocals, overheads, piano, and strings. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source. The mic's proximity effect provides added warmth when used close up. Features include a large protective screen that reduces "popping" and sibilant distortion. It operates on battery or phantom power.Features:Ideal for close-up vocals, overheads, piano and stringsLow-mass diaphragm ensures minimum distortionCardioid pattern provides added warmth when used close upOperates on battery or phantom powerRoHS compliant free from all substances specified in the EU directive on hazardous substancesSpecifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 30-20,000 HzLow Frequency Roll-off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: Phantom —44 dB (11.2 mV) re 1V at 1 Pa, Battery —45 dB (10.0 mV) re 1V at 1 PaImpedance: Phantom 250 ohms; Battery 300 ohmsMaximum Input Sound Level: Phantom 137 dB, 1 kHz at 1% T.H.D., Battery 123 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range (Typical): Phantom 113 dB, 1 kHz at Max SPL, Battery 99 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 70 dB, 1 kHz at 1 PaPhantom Power Requirements: 11-52V DC, 2 mA typicalBattery Type: 1.5V AA/UM3Battery Current/Life: 0.4 mA / 1200 hours typical (alkaline)Switch: Flat, roll-offWeight: 7.2 oz (205 g)Dimensions: 7.60" (193.0 mm) long, 1.98" (50.3 mm) head diameterOutput Connector: Integral 3-pin XLRM-typeAccessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8114 windscreen; battery; soft protective pouchAudio Technica Case Style: S7

This clip-on lavalier mic provides crisp, full-sounding voice pickup and excels as an instrument mic, especially for pickup of acoustic guitar with included AT8444 guitar adapter. It offers excellent gain before feedback and suppression of background noise. An integral 80 Hz high-pass filter provides easy switching from a flat frequency response to a low-end roll-off. It operates on battery or phantom power.

The AT803 provides excellent yet unobtrusive sound pickup for lecturers and stage/TV performers. Designed for clip-on lavalier and musical instrument use, it features an integral 80 Hz high-pass filter that provides easy switching from a flat frequency response to a low-end roll-off. The microphone operates on battery or phantom power.

Audio-Technica’s omnidirectional AT899c is engineered for intelligible, accurate voice reproduction. Its low-profile design (a mere 5 mm in diameter) assures minimum visibility. The mic may be worn as a lavalier and is easily hidden in clothing or hair. It offers the convenience of battery or phantom power; its switchable low-frequency roll-off reduces popping.

The new Artist Series vocal condenser microphone is tailored for exacting detail and high-fidelity vocal reproduction. With a condenser design for studio-quality performance, the ATM710 delivers remarkable clarity. The microphone is equipped with an integral 80 Hz hi-pass filter that provides easy switching from a flat frequency response to a low-end roll-off position that reduces the microphone's sensitivity to popping in close vocal use. The ATM710 is also equipped with a switchable 10 dB pad that lowers the microphone's sensitivity, providing higher SPL capability. The microphone's cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.Specifications:Element: Fixed-charge back plate permanently polarized condenserPolar Pattern: CardioidFrequency Response: 40-20,000 HzLow Frequency Roll Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: 40 dB (10.0 mV) re 1V at 1 PaImpedance: 200 ohmsMaximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 127 dB, 1 kHz at Max SPLSignal to Noise Ratio: 73 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 3.5 mA typicalWeight: 274 g (9.7 oz)Dimensions: 179.0 mm (7.05") long, 50.0 mm (1.97") diameterOutput Connector: Integral 3-pin XLRM-type

Supplied with Audio-Technica's versatile UniMount® clip and new violin mount, the low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, reeds, piano, snare, toms, and violin. The microphone offers a crisp, clear, well-balanced response, even at high SPLs. It features an integral 80 Hz hi-pass filter and is also equipped with a new in-line power module. Its cardioid polar pattern reduces pickup of sounds from the side and rear for effective protection against feedback.Features:Low-profile design for minimum visibilityUniMount® clip permits accurate positioning, provides shock resistance and protects elementUnique violin mount permits unobtrusive placement of microphone between the instrument's bridge and tailpieceCrisp, clear, well-balanced response, even at high SPLsCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceInterchangeable elements available for hypercardioid and omnidirectional polar patternsCorrosion-resistant contacts from gold-plated XLRM-type connectorRugged, all-metal design and construction for years of trouble-free use Specifications:Element: Fixed-charge back plate permanently polarized condenserPolar Pattern: CardioidFrequency Response: 40-20,000 HzLow Frequency Roll Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: 49 dB (3.5 mV) re 1V at 1 PaImpedance: 50 ohmsMaximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 122 dB, 1 kHz at Max SPLSignal to Noise Ratio: 67 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 3.5 mA typicalSwitch: Flat, roll-offCable: 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with TA3F-type connectorAccessories: AT8542 power module; AT8418 UniMount® microphone instrument mount; AT8468 violin mount; soft protective pouch 

Perfect for use with turntables, computers, smartphones or other devices, the AT-SP3X powered bookshelf speakers deliver rich, full-range audio via a wired or wireless connection. These compact, unobtrusive speakers elevate the listening experience in any room. They feature 3" woofers and 1.1" tweeters specially tuned by a built-in DSP to produce powerful, well-balanced sound for music, movies, and more.Small Size, Big Sound.An Elevated Listening Experience. Despite their small size, the AT-SP3X bookshelf speakers pack a big punch. They are specially tuned to deliver rich, full-range audio that’s powerful enough to fill any room in your house.Full-Range AudioPowered Speakers – No Amplifier/Receiver RequiredWired or Wireless ConnectivityIdeal for TurntablesNo Receiver/Amplifier RequiredEasy to UseIdeal Audio Solution for Any RoomWired or Wireless ConnectivityThe AT-SP3X speakers are designed to work on their own with no receiver or amplifier required. Simply connect the speakers to your turntable, computer, or other device, then plug in the AC adapter, and you’re good to go.With dual RCA jacks and Bluetooth technology, the AT-SP3X speakers allow you to establish a wired or wireless connection to your turntable, computer, smartphone or other device, and set up wherever you like. The minimalistic design makes the speakers perfect for any room.

ATW-R3210 receiver and ATW-T3202 handheld transmitter with ATW-C710 cardioid condenser microphone capsule

The Audio-Technica fourth-generation 3000 Series wireless systems give you the power and flexibility to operate within the congested UHF spectrum. 3000 Series systems have an operating range of 300' (100 m) and are available in two frequency bands – DE2 (470–530 MHz) and EE1 (530–590 MHz) – that provide a class-leading 60 MHz tuning range, which is more than twice that offered by the previous 3000 Series models. Navigate Today’s Congested RF Environment This feature-rich wireless system boasts a class-leading 60 MHz tuning range, giving you the power to operate unimpeded. Easily Accessible Backup Frequency The transmitter’s multifunction button can be used to switch to a preset backup frequency if interference is encountered. Extremely wide 60 MHz UHF tuning bandwidth for maximum versatility in an increasingly congested RF environment; available in several frequency bands: DE2 (470–530 MHz), EE1 (530–590 MHz), EF1 (590-650 MHz), FG1 (650-700 MHz), GH2 (794-806 MHz) and HH2 (821-832 and 863-865 MHz) Unique multifunction button on the handheld and body-pack transmitters can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered Network-enabled system, featuring the ATW-R3210N receiver*, offers network monitoring and control via Wireless Manager software True Diversity operation reduces dropouts Auto Squelch feature automatically adjusts squelch setting to maximize range while minimizing potential interference Frequency scan and IR sync functionality for ease of setup - Dual-mode receiver display can switch between standard view or a performance view that highlights key metering Transmitters and receivers include OLED screens for optimal readout of key settings and alerts Handheld transmitter offers extremely low handling noise and includes an industry-standard thread mount for use with six interchangeable A-T microphone capsules, as well as other compatible capsules New rugged cH-style connector on body-pack transmitter provides secure connection to lavalier mics, headworn mics, and cables with cH-style screw-down 4-pin connector Body-pack transmitter features tactile mute toggle switch (defeatable) for physical confirmation of mute status when transmitter display is not visible Charging terminals on transmitters work with optional ATW-CHG3 and ATW-CHG3N smart charging docks to recharge NiMH batteries Antenna power available for powered antennas and other in-line RF devices Ground-lift switch helps eliminate audible hum caused by ground loops Balanced and unbalanced audio output jacks *Not available in all frequency bands, please check the configurable selection or contact your local Audio-Technica contact for further information.

ATW-R3210 receiver and ATW-T3201 body-pack transmitter with cH-style screw-down 4-pin connector. Select a microphone or cable with a cH-style screw-down 4-pin connector to complete the system. Available separately, the AT-cWcH Adapter Cable enables wireless microphones with a cW-style locking 4-pin connector to be used with body-pack transmitters that have a cH-style screw-down 4-pin connector.

5000 Series handheld microphone/transmitter body (handle only, capsule sold separately) with industry-standard thread mount for use with ATW-C510, ATW-C710, ATW-C4100, ATW-C6100, ATW-C3300, and ATW-C5400 interchangeable wireless microphone capsules (or other compatible capsules). Includes AT8456a Quiet-Flex stand clamp. Unique multifunction button can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered Rugged, ergonomic metal body, highly visible OLED displays, programmable features, soft-touch controls, and switchable 2/10/50 mW RF power Features high-pass filter and accepts six interchangeable microphone capsules (based on best-selling Audio-Technica models) that use industry-standard thread mount and provide low-handling noise

Audio-Technica’s third-generation 5000 Series wireless Body-Pack Transmitter Designed for use on professional tours, in stadiums, concert halls, festivals, houses of worship and other demanding audio environments, the Audio-Technica 5000 Series provides incredible audio quality and proven, critically acclaimed performance for artists, broadcasters and presenters worldwide. ATW-T5201 body-pack transmitter for use with the 5000 Series offers the highest-quality wireless live sound, with dual-compander circuitry that processes high and low frequencies separately. The transmitter features rugged, ergonomic metal body, highly visible OLED screen (switchable between standard and performance views to highlight key metering), programmable features, soft-touch controls, and switchable RF power (2 mW/10 mW/50 mW). Available in three different frequency ranges – DE1 (470–590 MHz), EG1 (580–700 MHz) and GH1 (700–820) – to provide complete coverage of the receiver’s bandwidth. The compact ATW-T5201 is equipped with Audio-Technica’s new rugged cH-style screw-down 4-pin connector for secure connection to A-T’s cH-style lavalier and headworn microphones, or cables. More features are the auto squelch function which automatically adjusts the squelch setting to maximize operating range while minimizing potential interference and a backup frequency that can be quickly swapped by pressing the transmitter’s multifunction button in the event of unexpected interference. Software enables remote monitoring and control of the wireless system. Two receivers are available for use with the 5000 Series: ATW-R5220 with two balanced XLR outputs and ATW-R5220DAN that also includes a Dante output. 5000 Series components and compatible accessories are offered as individual, à la carte products to give you the greatest possible flexibility in constructing a system that fits your needs. Please note that some frequency bands might not be available in your territory or could come with limited tuning bandwidth / transmitting power due to local regulations. For assistance with frequency coordination, please contact your regional Audio-Technica customer service representative. Body-pack transmitter provides 120 MHz UHF tuning bandwidth (DE1: 470–590 MHz, EG1: 580–700 MHz, GH1: 700–820) for maximum versatility in an ever-congested RF environment Unique multifunction button can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered Auto squelch feature automatically adjusts squelch setting to maximize range while minimizing potential interference Dual compander circuitry processes high and low frequencies separately for unmatched audio quality Highly visible OLED transmitter screen Highest possible wearing comfort due to small size - 64 mm × 70 mm × 17 mm (W × D × H) Robust, ergonomic full metal body with concealed soft-touch controls and IR sync functionality Programmable features and switchable 2/10/50 mW RF power Rugged cH-style connector provides secure connection to lavalier mics, headworn mics, and cables with cH-style screw-down 4-pin connector Advanced digital Tone Lock™ squelch effectively blocks stray RF; the digitally encoded tone also communicates transmitter data for receiver display Wireless network monitoring and control software 5000 Series components are offered individually – not as preconfigured systems – for greater flexibility “Dual compander for incredible audio quality” Designed for use on professional tours, in stadiums, concert halls, festivals, houses of worship and other demanding audio environments, the Audio-Technica 5000 Series provides incredible audio quality and proven, critically acclaimed performance for artists, broadcasters and presenters worldwide. “Comprehensive tuning bandwith” For maximum versatility in ever-congested RF environment the dual-channel receiver provides a tuning bandwidth of 230 MHz (DG1: 470–700 MHz.). Both transmitters (HH/ATW-T5202 and BP/ATW-T5201) are available in two different frequency ranges – DE1 (470–590 MHz) and EG1 (580–700 MHz) – to provide complete coverage of the receiver’s bandwidth. “Designed for professionals” The transmitter provides highest possible wearing comfort due to small size - 64 mm × 70 mm × 17 mm (W × D × H), robust and ergonomic full metal body with concealed soft-touch controls, rugged cH-style connector for secure connection - just to name a few features that meet the needs of professional users. 4-pin connector The compact ATW-T5201 is equipped with Audio-Technica’s new rugged cH-style screw-down 4-pin connector for secure connection to A-T’s cH-style lavalier and headworn microphones, or cables Wide Bandwidth Body-pack transmitter provides 120 MHz UHF tuning bandwidth (DE1: 470–590 MHz, EG1: 580–700 MHz, GH1: 700–820). Backup frequency Unique multifunction button on the handheld and body-pack transmitters can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered Small Size Highest possible wearing comfort due to small size - 64 mm × 70 mm × 17 mm (W × D × H).

Audio-Technica’s third-generation 5000 Series wireless system Designed for use on professional tours, in stadiums, concert halls, festivals, houses of worship and other demanding audio environments, the Audio-Technica 5000 Series provides incredible audio quality and proven, critically acclaimed performance for artists, broadcasters and presenters worldwide. Audio-Technica’s third-generation, dual-receiver 5000 Series offers the highest-quality wireless live sound, with dual-compander circuitry that processes high and low frequencies separately and True Diversity operation. The receiver features a tuning bandwidth of 230 MHz (DG1): 470–700 MHz or a tuning bandwidth of 120 MHz (GH1): 700–820 MHz. You have the option of selecting a standard receiver (ATW-R5220) with two balanced XLR outputs or a receiver (ATW-R5220DAN) that also includes a Dante output. An antenna cascade output connects up to eight receivers, so a single pair of antennas can feed up to 16 channels of wireless. More features are the auto squelch function which automatically adjusts the squelch setting to maximize operating range while minimizing potential interference and a backup frequency that can be quickly swapped by pressing the transmitter’s multifunction button in the event of unexpected interference. Software enables remote monitoring and control of the wireless system. Two transmitters are available for use with the 5000 Series: ATW-T5201 body-pack transmitter and ATW-T5202 handheld transmitter. 5000 Series components and compatible accessories are offered as individual, à la carte products to give you the greatest possible flexibility in constructing a system that fits your needs. Please note that some frequency bands might not be available in your territory or could come with limited tuning bandwidth / transmitting power due to local regulations. For assistance with frequency coordination, please contact your regional Audio-Technica customer service representative. Dual-channel receiver provides 230 MHz (DG1: 470–700 MHz) or 120 MHz (GH1: 700–820 MHz) UHF tuning bandwidth for maximum versatility in an ever-congested RF environment Antenna cascade output allows 8 receivers to be connected so that a single pair of antennas can feed up to 16 channels of wireless. These connectors also provide a simple RF cable check feature to aid in RF troubleshooting Auto squelch feature automatically adjusts squelch setting to maximize range while minimizing potential interference Dual compander circuitry processes high and low frequencies separately for unmatched audio quality The full-rack receiver chassis holds two independent receivers, and offers antenna power, frequency scan and IR sync functionality, a ground-lift switch, and a front-panel headphone jack Dual-mode, highly visible OLED receiver screen can switch between standard view or a performance view that highlights key metering Receiver is available with two balanced XLR outputs (ATW-R5220) or with two balanced XLR outputs and a Dante output (ATW-R5220DAN) Advanced digital Tone Lock™ squelch effectively blocks stray RF; the digitally encoded tone also communicates transmitter data for receiver display Wireless network monitoring and control software 5000 Series components are offered individually – not as preconfigured systems – for greater flexibility “Dual compander for incredible audio quality” Designed for use on professional tours, in stadiums, concert halls, festivals, houses of worship and other demanding audio environments, the Audio-Technica 5000 Series provides incredible audio quality and proven, critically acclaimed performance for artists, broadcasters and presenters worldwide. “Comprehensive tuning bandwith” For maximum versatility in ever-congested RF environment the dual-channel receiver provides a tuning bandwidth of 230 MHz (DG1: 470–700 MHz.). Both transmitters (HH/ATW-T5202 and BP/ATW-T5201) are available in two different frequency ranges – DE1 (470–590 MHz) and EG1 (580–700 MHz) – to provide complete coverage of the receiver’s bandwidth. “Cascade output saves using an antenna distributor” The two antenna cascade outputs on the back of the unit can connect up to eight receivers, allowing a single pair of antennas to power up to 16 wireless channels. Wide Bandwidth Dual-channel receiver provides a tuning bandwidth of 230 MHz (DG1: 470–700 MHz) or 120 MHz (GH1: 700–820 MHz). IR-Sync IR-Sync functionality for a quick transfer of settings between transmitter and receiver. Dante Optional Receiver is available with two balanced XLR outputs (ATW-R5220) or with two balanced XLR outputs and a Dante output (ATW-R5220DAN). OLED screens Dual-mode, highly visible OLED receiver screen can switch between standard view or a performance view that highlights key metering

Hypercardioid Dynamic Instrument Microphone ATM250 A natural with high SPLs, the ATM250 hypercardioid dynamic is tailored for kick drum, percussion, brass and other highly dynamic instruments. Its rich, warm low-frequency response gives the microphone excellent presence. The microphone is equipped with a rare earth neodymium magnet and a tight hypercardioid polar pattern. Includes a professional isolation clamp to provide secure mounting, versatile positioning and effective dampening of unwanted mechanical noise. Handles very high SPL at close range Big, warm low-frequency response with excellent presence Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source Durable, proven performance for professional applications Hi-ENERGY® neodymium magnet for improved output and transient response Superior off-axis rejection for maximum gain before feedback Corrosion-resistant contacts from gold-plated XLRM-type connector Rugged, all-metal design and construction for years of trouble-free use

ATW-1102 System 10 Wireless Handheld Microphone System ATW-R1100 receiver and ATW-T1002 handheld dynamic unidirectional microphone/transmitter. Includes AT8456a Quiet-Flex stand clamp.

With its half-space unidirectional polar pattern, low-profile design, and outstanding sound quality, the PRO44 is ideal for conference tables, podiums, lecterns and other installed-sound uses. This versatile boundary mic's self-contained electronics eliminate the need for external power modules. The PRO44 is equipped with a wide-range condenser element with low-mass diaphragm for superior performance. Low-profile design for minimum visibility Wide-range condenser element with low-mass diaphragm for superior performance Self-contained electronics eliminate need for external power modules Rugged design and construction 25' (7.6 m) detachable cable (TA3F to XLRM-type)

The PRO42's low-profile design assures inconspicuous appearance for surface-mount use in boardroom, school, government, house of worship and other installed applications. Designed for sound reinforcement, broadcasting and recording applications, the PRO42 brings crisp, intelligible audio reproduction to the podium, stage, conference table and beyond. With a wide-range condenser element and low-mass diaphragm for superior performance, the microphone is equipped with self-contained electronics, eliminating the need for external power modules. Very low-profile design for minimum visibility Wide-range condenser element with low-mass diaphragm for superior performance Uniform polar pattern for maximum rejection of unwanted sounds Rugged design and construction 25' (7.6 m) cable permanently attached between microphone and XLRM-type connector

ATW-1101 System 10 Wireless Body-Pack System. ATW-R1100 receiver and ATW-T1001 body-pack transmitter. Select a microphone or cable with a cW-style locking 4-pin connector to complete the system.

AT-One Handheld Transmitter System ATW-13 AT-One Handheld Transmitter System - Simple to set up and use, 2 x 4 channel frequency plan for enhanced flexibility, Rack mountable for easy installation and Intuitive receiver and transmitter controls. ATw-13 the At-One Entry Level Uhf System, The Best Equipped On The Market AT-One, Audio-Technica’s entry level UHF wireless system. With a 2 x 4 channel frequency plan for enhanced flexibility, sturdy but stylish build quality and a simple user interface, AT-One is ready to become your perfect wireless companion. AT-One is designed with simplicity and ease-of-use in mind. Equipped with a practical carrying case, rack-mount kit and detachable antennae, AT-One is the perfect balance of price and performance, ideal for those looking for accurate, reliable performance at an entry level price. The AT-One’s frequency plan is divided into two groups with 4 available channels in each group split between the Europe wide license free frequency range and the LTE duplex gap. Users can choose up to 4 channels within one group. Available in three configurations, AT-One can be purchased with a beltpack or handheld transmitter. The ATW-13 handheld system features the ATW-T3 cardioid condenser handheld transmitter, again with 10mW RF output and 10 hour battery life. Designed for quick and easy use Perfect balance between price and performance, the AT-One is ideal for those looking for reliable results at low prices The frequency plan of AT-One is divided into two groups with 4 channels available in each group, one in the range of authorized European frequencies and the other in the duplex Gap Users can choose up to 4 channels in a group The ATW-13 system is equipped with a cardioid condenser handheld transmitter RF transmission power 10mW Up to 10 hours' battery life with 2 x 1.5V AA batteries RF Indicator light Robust construction from high quality components Delivered in a transport case with a rack mount kit and detachable antennas “2 X 4 Channels” AT-One's frequency plan is divided into two groups, each with 4 channels available, one in the range of authorized European frequencies and the other in the duplex gap. Users can choose up to 4 channels in a group. “rf light indicator” The display on the half-rack receiver clearly indicates both the RF and AF levels. “12v power” The ATW-R1 receiver delivers a voltage of 12V / 100 mA for powering an ATW-B80 booster antenna, active splitters, an antenna combiner or any other active component. Delivered in a case The AT-One comes with an ATW-R1 receiver, an ATW-T1 pocket transmitter, detachable antennas, a rack-mount kit, and a power supply, all in a hard carrying case. Easy to use The AT-One has been conceived and designed for quick and easy use. Simply open the carrying case, connect, and your UHF wireless system is immediately operational. Cardioid condenser mic The ATW-T3 cardioid condenser handheld microphone is included. This microphone prevents interference when used in places equipped with induction loops. Removable antennae The antennae of the AT-One wireless system are detachable, which alternatively allows remote operation via a single BNC cable.

At-One Beltpack System ATW-11 AT-One Beltpack System - Simple to set up and use, 2 x 4 channel frequency plan for enhanced flexibility Rack mountable for easy installation and Intuitive receiver and transmitter controls. Atw-11 The At-One Entry Level Uhf System, The Best Equipped On The Market AT-One, Audio-Technica’s entry level UHF wireless system. With a 2 x 4 channel frequency plan for enhanced flexibility, sturdy but stylish build quality and a simple user interface, AT-One is ready to become your perfect wireless companion. AT-One is designed with simplicity and ease-of-use in mind. Equipped with a practical carrying case, rack-mount kit and detachable antennae, AT-One is the perfect balance of price and performance, ideal for those looking for accurate, reliable performance at an entry level price. The AT-One’s frequency plan is divided into two groups with 4 available channels in each group split between the Europe wide license free frequency range and the LTE duplex gap. Users can choose up to 4 channels within one group. Available in three configurations, AT-One can be purchased with a beltpack or handheld transmitter. The ATW-11 comes equipped with a sturdy, discreetly designed beltpack, providing 10mW RF output power, damping switch and a battery life of 10 hours. Designed for quick and easy use Perfect balance between price and performance, the AT-One is ideal for those looking for reliable results at low prices The frequency plan of AT-One is divided into two groups with 4 channels available in each group, one in the range of authorized European frequencies and the other in the duplex Gap Users can choose up to 4 channels in a group The ATW-11 system is equipped with a discreet and robust pocket transmitter RF transmission power 10mW The bodypack transmitter has a 4-pin HRS connector, which is able to connect to all Audio-Technica wireless microphones Up to 10 hours' battery life with 2 x 1.5V AA batteries RF Indicator light Robust construction from high quality components Delivered in a transport case with a rack mount kit and detachable antennas “2 X 4 Channels” AT-One's frequency plan is divided into two groups, each with 4 channels available, one in the range of authorized European frequencies and the other in the duplex gap. Users can choose up to 4 channels in a group. “rf light indicator” The display on the half-rack receiver clearly indicates both the RF and AF levels. “12v power” The ATW-R1 receiver delivers a voltage of 12V / 100 mA for powering an ATW-B80 booster antenna, active splitters, an antenna combiner or any other active component. Delivered in a case The AT-One comes with an ATW-R1 receiver, an ATW-T1 pocket transmitter, detachable antennas, a rack-mount kit, and a power supply, all in a hard carrying case. Easy to use The AT-One has been conceived and designed for quick and easy use. Simply open the carrying case, connect, and your UHF wireless system is immediately operational. Hrs connector The ATW-T1 bodypack transmitter (included) is equipped with a 4-pin HRS connector, so you can plug in any Audio-Technica wireless microphone, as and when required. Removable antennae The antennae of the AT-One wireless system are detachable, which alternatively allows remote operation via a single BNC cable.

Handheld/Stand Cardioid Condenser Microphone. A price/performance leader, the MB4k cardioid condenser microphone is the Midnight Blues Series' introductory studio-quality microphone. With a condenser design for studio vocal and instrument applications, the microphone features: battery/phantom operation; rugged all-metal construction; soft-touch finish; extended response for smooth, natural sonic characteristics; corrosion-resistant contacts from gold-plated XLRM-type connector; on/off switch. Introductory studio-quality microphone - the clear price/performance leader Condenser design for studio-quality vocal and instrument applications Extended response for smooth, natural sonic characteristics Rugged all-metal construction and on/off switch Soft-touch finish for a secure, comfortable grip and reduced mechanical noise Battery/phantom operation for maximum versatility Corrosion-resistant gold-plated XLRM-type connector

Handheld/Stand Hypercardioid Dynamic Instrument Microphone. The industry standard for affordable instrument microphones, the MB2k features a hypercardioid dynamic element design for outstanding off-axis rejection and feedback control. Its frequency response is tailored for optimal instrument pickup. This rugged, all-metal mic is equipped Audio-Technica's Hi-Energy® neodymium magnet structure for maximum output and fast transient response, with noise-reducing soft-touch finish, MagnaLock™ switch design for silent on/off operation, and a corrosion-resistant gold-plated XLRM-type connector. Smart-priced introductory microphone for amplified and acoustic instruments Tailored frequency response for optimal instrument reproduction Hypercardioid dynamic element design Rugged all-metal construction Hi-Energy® neodymium magnet for improved output and transient response Soft-touch finish reduces mechanical noise Silent on-off operation thanks to MagnaLock™ switch design Corrosion-resistant gold-plated XLRM-type connector

Omnidirectional Condenser Lavalier Microphone, for A-T Wireless System. Audio-Technica’s newscaster-style omnidirectional ATR35cW wireless lavalier is engineered for intelligible, accurate voice reproduction. This high-quality condenser is ideal for video use, and is a favorite choice for aerobics/dance/sports instructors. Its low-profile design assures minimum visibility. Newscaster-style miniature mic is perfect for video use Ideal for aerobics/dance/sports instructors 55" (1.4 m), terminated for use with Audio-Technica wireless transmitter Omni pickup pattern offers full coverage Includes tie clip, battery, foam windscreen

Designed for use with brass, saxophone and other instruments, the ATM350U UniMount® mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument. When teamed with the included AT8491U universal clip-on mount and strong, flexible AT8490 5" gooseneck, the mic can be clipped securely to the bell of your instrument and positioned to stay where you want it – the gooseneck won’t flop around no matter how aggressively you move the instrument as you play. The microphone’s cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case. Features: Low-profile mic design for minimum visibility Crisp, clear, well-balanced microphone response, even at high SPLs Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source UniMount® universal clip-on mount attaches securely to instrument bell and provides excellent shock resistance for the microphone Rugged UniMount® 5" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise Interchangeable elements available for hypercardioid and omnidirectional polar patterns Included violin mount with hook-and-loop fastener provides an additional mounting option