Audio Technica

Ειδικά σχεδιασμένο για υψηλής πιστότητας αναπαραγωγή φωνητικών ευρέως φάσματος. Υπερκαρδιοειδές πολικό διάγραμμα που μειώνει την επιλογή ήχων από τις πλευρές και πίσω, βελτιώνοντας την απομόνωση της επιθυμητής πηγής ήχου. Ανθεκτική απόδοση για επαγγελματικές εφαρμογές. Ειδική ταλαντούμενη κατασκευή διπλού τοιχώματος που μειώνει το θόρυβο και εξασφαλίζει ομοιόμορφη απόδοση μεταξύ διαφορετικών μικροφώνων της σειράς. High ENERGY μαγνήτης νεοδυμίου για καθαρή αναπαραγωγή φωνητικών. Πολυεπίπεδη σχεδίαση πλέγματος που προσφέρει άριστη προστασία από τους ήχους που προκαλούνται από φθόγγους όπως «π», «μπ» και «σ», χωρίς συμβιβασμούς στην καθαρότητα των υψηλών συχνοτήτων. Quiet-Flex κολάρο βάσης που παρέχει σιωπηρή, ευέλικτη τοποθέτηση μικροφώνου.Χαρακτηριστικά:Κάψα:  ΔυναμικήΠολικό Διάγραμμα: ΥπερκαρδιοειδέςΣυχνοτική Απόκριση: 40-16,000 HzΕυαισθησία: 55 dB (1.7 mV) re 1V at 1 PaΠρόσθετα Χαρακτηριστικά: High ENERGY μαγνήτης νεοδυμίου για καθαρή αναπαραγωγή φωνητικώνΧρήση: υψηλής πιστότητας αναπαραγωγή φωνητικών ευρέως φάσματος

The Audio Technica AT8031 microphone is ideal for close-up interviews, vocals, overheads, piano, and strings. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source. The mic's proximity effect provides added warmth when used close up. Features include a large protective screen that reduces "popping" and sibilant distortion. It operates on battery or phantom power.Χαρακτηριστικά:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 30-20,000 HzLow Frequency Roll-off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: Phantom —44 dB (11.2 mV) re 1V at 1 Pa; Battery —45 dB (10.0 mV) re 1V at 1 PaImpedance: Phantom 250 ohms; Battery 300 ohmsMaximum Input Sound Level: Phantom 137 dB, 1 kHz at 1% T.H.D.; Battery 123 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range (Typical): Phantom 113 dB, 1 kHz at Max SPL; Battery 99 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 70 dB, 1 kHz at 1 PaPhantom Power Requirements: 11-52V DC, 2 mA typicalBattery Type: 1.5V AA/UM3Battery Current/Life: 0.4 mA / 1200 hours typical (alkaline)Switch: Flat, roll-offWeight: 7.2 oz (205 g)Dimensions: 7.60" (193.0 mm) long, 1.98" (50.3 mm) head diameterOutput Connector: Integral 3-pin XLRM-typeAccessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8114 windscreen; battery; soft protective pouchAudio Technica Case Style: S7

Audio Technica  AM3 μικρόφωνο πέτου. Ρight-angle 3.5 mm connector (compatible with Audio-Technica M2 & M3 Wireless Monitor Systems)Includes clothing clip and windscreen  

Τερματισμένο με βύσμα που κλειδώνει και υποδοχή 4 ακίδων για AT UniPak® pody-pack ασύρματων πομπών. Περιλαμβάνει 1,4 m καλώδιο. Δείτε AT831R.

Miniature cardioid condenser microphone only, terminated for use with PRO 88W transmitter. 55" (1.4 m) cable. Includes clothing clip and windscreen.

Επιδόσεις επιπέδου στούντιο.Το πλήρες πακέτο μικροφώνων για ντραμς MB / Dk7 Drum Pack περιλαμβάνει ότι και το MB/Dk5 Drum Pack, με την προσθήκη δύο καρδιοειδών πυκνωτικών μικροφώνων MB4k που είναι ιδανικά για overheads τύμπανα.Χαρακτηριστικά:Κάψα ΔυναμικήΠολικό διάγραμμα ΚαρδιοειδέςΑπόκριση συχνότητας 60-12.000 HzΕυαισθησία σε ελέυθερο πεδίο –59 dB (1.1 mV) re 1V σε 1 Pa*Αντίσταση 500ΩΒάρος 317 γρ. (11.2 oz )Διαστάσεις Μήκος: 116.5 χιλ. (4.59”)Διάμετρος κεφαλής 53.5 χιλ. (2.11”)Ενιαίο 3-pin τύπου XLRM

Το πακέτο μικροφώνων για ντραμς MB/Dk5 Drum Pack περιλαμβάνει μία βασική επιλογή από πέντε μικρόφωνα ειδικά σχεδιασμένα για εφαρμογές τυμπάνων. Τα τέσσερα συμπεριλαμβανόμενα μικρόφωνα MB5k για ταμπούρα / τύμπανα τομ και το ένα μικρόφωνο MB6k για μπότες χαρακτηρίζονται από μία σχεδίαση χαμηλού προφίλ για ελάχιστη ορατότητα και πληθώρα επιλογών τοποθέτησης γύρω από το σετ τυμπάνων. Στο πακέτο περιλαμβάνονται τέσσερεις βάσεις μικροφώνων AT8665 για τις στεφάνες των τυμπάνων και μία ανθεκτική τσάντα μεταφοράς.Χαρακτηριστικά:Κάψα ΔυναμικήΠολικό διάγραμμα ΚαρδιοειδέςΑπόκριση συχνότητας 100-12.000 HzΕυαισθησία σε ελέυθερο πεδίο –58 dB (1.2 mV) re 1V σε 1 Pa*Αντίσταση 500ΩΒάρος 324 γρ. (11.4 oz )Διαστάσεις Μήκος: 113.2 χιλ. (4.46”)Διάμετρος κεφαλής 41.5 χιλ. (1.63”)Ενιαίο 3-pin τύπου XLRM

Καρδιοειδές δυναμικό μικρόφωνο για φωνητικά. Ειδικά σχεδιασμένο για ομαλή φυσική αναπαραγωγή φωνητικών.Χαρακτηριστικά:Κάψα: ΔυναμικήΠολικό Διάγραμμα: καρδιοειδέςΣυχνοτική Απόκριση: 90-16.000 ΗzΕυαισθησία: 55 dB (1.7 mV) re 1V at 1 PaΧρήση: για ομαλή φυσική αναπαραγωγή φωνητικών

Audio Technica ATM710 πυκνωτικό μικρόφωνο φωνής.Χαρακτηριστικά:   Element: Fixed-charge back plate permanently polarized condenser   Polar Pattern: Cardioid   Frequency Response: 40-20,000 Hz   Low Frequency Roll Off: 80 Hz, 12 dB/octave   Open Circuit Sensitivity: 40 dB (10.0 mV) re 1V at 1 Pa   Impedance: 200 ohms   Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.   Dynamic Range: 127 dB, 1 kHz at Max SPL   Signal to Noise Ratio: 73 dB, 1 kHz at 1 Pa   Phantom Power Requiremens: 11-52V DC, 3.5 mA typical   Weight: 274 g (9.7 oz)   Dimensions: 179.0 mm (7.05") long, 50.0 mm (1.97") diameter   Output Connector: Integral 3-pin XLRM-type

Ίδιο με το AT831R αλλά εκτός από τροφοδοσία phantom, μπορεί να λειτουργήσει και με μπαταρία. Καλώδιο 1.8 μέτρων που συνδέεται στη μονάδα τροφοδοσίας. Περιλαμβάνει μονάδα τροφοδοσίας AT8531 (off/on/roll/off), παρέχονται τα ίδια αξεσουάρ με το AT831R.

The AT803 provides excellent yet unobtrusive sound pickup for lecturers and stage/TV performers. Designed for clip-on lavalier and musical instrument use, it features an integral 80 Hz high-pass filter that provides easy switching from a flat frequency response to a low-end roll-off. The microphone operates on battery or phantom power.

Audio-Technica’s omnidirectional AT899 is engineered for intelligible, accurate voice reproduction. Its low-profile design (a mere 5 mm in diameter) assures minimum visibility. The mic may be worn as a lavalier and is easily hidden in clothing or hair. It offers the convenience of battery or phantom power; its switchable low-frequency roll-off reduces popping.

Supplied with Audio-Technica's versatile UniMount® clip and new violin mount, the low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, reeds, piano, snare, toms, and violin. The microphone offers a crisp, clear, well-balanced response, even at high SPLs. It features an integral 80 Hz hi-pass filter and is also equipped with a new in-line power module. Its cardioid polar pattern reduces pickup of sounds from the side and rear for effective protection against feedback.Features:Low-profile design for minimum visibilityUniMount® clip permits accurate positioning, provides shock resistance and protects elementUnique violin mount permits unobtrusive placement of microphone between the instrument's bridge and tailpieceCrisp, clear, well-balanced response, even at high SPLsCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceInterchangeable elements available for hypercardioid and omnidirectional polar patternsCorrosion-resistant contacts from gold-plated XLRM-type connectorRugged, all-metal design and construction for years of trouble-free use Specifications:Element: Fixed-charge back plate permanently polarized condenserPolar Pattern: CardioidFrequency Response: 40-20,000 HzLow Frequency Roll Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: 49 dB (3.5 mV) re 1V at 1 PaImpedance: 50 ohmsMaximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 122 dB, 1 kHz at Max SPLSignal to Noise Ratio: 67 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 3.5 mA typicalSwitch: Flat, roll-offCable: 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with TA3F-type connectorAccessories: AT8542 power module; AT8418 UniMount® microphone instrument mount; AT8468 violin mount; soft protective pouch 

ATW-R3210 receiver and ATW-T3202 handheld transmitter with ATW-C710 cardioid condenser microphone capsule

The Audio-Technica fourth-generation 3000 Series wireless systems give you the power and flexibility to operate within the congested UHF spectrum. 3000 Series systems have an operating range of 300' (100 m) and are available in two frequency bands – DE2 (470–530 MHz) and EE1 (530–590 MHz) – that provide a class-leading 60 MHz tuning range, which is more than twice that offered by the previous 3000 Series models. Navigate Today’s Congested RF Environment This feature-rich wireless system boasts a class-leading 60 MHz tuning range, giving you the power to operate unimpeded. Easily Accessible Backup Frequency The transmitter’s multifunction button can be used to switch to a preset backup frequency if interference is encountered. Extremely wide 60 MHz UHF tuning bandwidth for maximum versatility in an increasingly congested RF environment; available in several frequency bands: DE2 (470–530 MHz), EE1 (530–590 MHz), EF1 (590-650 MHz), FG1 (650-700 MHz), GH2 (794-806 MHz) and HH2 (821-832 and 863-865 MHz) Unique multifunction button on the handheld and body-pack transmitters can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered Network-enabled system, featuring the ATW-R3210N receiver*, offers network monitoring and control via Wireless Manager software True Diversity operation reduces dropouts Auto Squelch feature automatically adjusts squelch setting to maximize range while minimizing potential interference Frequency scan and IR sync functionality for ease of setup - Dual-mode receiver display can switch between standard view or a performance view that highlights key metering Transmitters and receivers include OLED screens for optimal readout of key settings and alerts Handheld transmitter offers extremely low handling noise and includes an industry-standard thread mount for use with six interchangeable A-T microphone capsules, as well as other compatible capsules New rugged cH-style connector on body-pack transmitter provides secure connection to lavalier mics, headworn mics, and cables with cH-style screw-down 4-pin connector Body-pack transmitter features tactile mute toggle switch (defeatable) for physical confirmation of mute status when transmitter display is not visible Charging terminals on transmitters work with optional ATW-CHG3 and ATW-CHG3N smart charging docks to recharge NiMH batteries Antenna power available for powered antennas and other in-line RF devices Ground-lift switch helps eliminate audible hum caused by ground loops Balanced and unbalanced audio output jacks *Not available in all frequency bands, please check the configurable selection or contact your local Audio-Technica contact for further information.

ATW-R3210 receiver and ATW-T3201 body-pack transmitter with cH-style screw-down 4-pin connector. Select a microphone or cable with a cH-style screw-down 4-pin connector to complete the system. Available separately, the AT-cWcH Adapter Cable enables wireless microphones with a cW-style locking 4-pin connector to be used with body-pack transmitters that have a cH-style screw-down 4-pin connector.

5000 Series handheld microphone/transmitter body (handle only, capsule sold separately) with industry-standard thread mount for use with ATW-C510, ATW-C710, ATW-C4100, ATW-C6100, ATW-C3300, and ATW-C5400 interchangeable wireless microphone capsules (or other compatible capsules). Includes AT8456a Quiet-Flex stand clamp. Unique multifunction button can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered Rugged, ergonomic metal body, highly visible OLED displays, programmable features, soft-touch controls, and switchable 2/10/50 mW RF power Features high-pass filter and accepts six interchangeable microphone capsules (based on best-selling Audio-Technica models) that use industry-standard thread mount and provide low-handling noise

Audio-Technica’s third-generation 5000 Series wireless Body-Pack Transmitter Designed for use on professional tours, in stadiums, concert halls, festivals, houses of worship and other demanding audio environments, the Audio-Technica 5000 Series provides incredible audio quality and proven, critically acclaimed performance for artists, broadcasters and presenters worldwide. ATW-T5201 body-pack transmitter for use with the 5000 Series offers the highest-quality wireless live sound, with dual-compander circuitry that processes high and low frequencies separately. The transmitter features rugged, ergonomic metal body, highly visible OLED screen (switchable between standard and performance views to highlight key metering), programmable features, soft-touch controls, and switchable RF power (2 mW/10 mW/50 mW). Available in three different frequency ranges – DE1 (470–590 MHz), EG1 (580–700 MHz) and GH1 (700–820) – to provide complete coverage of the receiver’s bandwidth. The compact ATW-T5201 is equipped with Audio-Technica’s new rugged cH-style screw-down 4-pin connector for secure connection to A-T’s cH-style lavalier and headworn microphones, or cables. More features are the auto squelch function which automatically adjusts the squelch setting to maximize operating range while minimizing potential interference and a backup frequency that can be quickly swapped by pressing the transmitter’s multifunction button in the event of unexpected interference. Software enables remote monitoring and control of the wireless system. Two receivers are available for use with the 5000 Series: ATW-R5220 with two balanced XLR outputs and ATW-R5220DAN that also includes a Dante output. 5000 Series components and compatible accessories are offered as individual, à la carte products to give you the greatest possible flexibility in constructing a system that fits your needs. Please note that some frequency bands might not be available in your territory or could come with limited tuning bandwidth / transmitting power due to local regulations. For assistance with frequency coordination, please contact your regional Audio-Technica customer service representative. Body-pack transmitter provides 120 MHz UHF tuning bandwidth (DE1: 470–590 MHz, EG1: 580–700 MHz, GH1: 700–820) for maximum versatility in an ever-congested RF environment Unique multifunction button can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered Auto squelch feature automatically adjusts squelch setting to maximize range while minimizing potential interference Dual compander circuitry processes high and low frequencies separately for unmatched audio quality Highly visible OLED transmitter screen Highest possible wearing comfort due to small size - 64 mm × 70 mm × 17 mm (W × D × H) Robust, ergonomic full metal body with concealed soft-touch controls and IR sync functionality Programmable features and switchable 2/10/50 mW RF power Rugged cH-style connector provides secure connection to lavalier mics, headworn mics, and cables with cH-style screw-down 4-pin connector Advanced digital Tone Lock™ squelch effectively blocks stray RF; the digitally encoded tone also communicates transmitter data for receiver display Wireless network monitoring and control software 5000 Series components are offered individually – not as preconfigured systems – for greater flexibility “Dual compander for incredible audio quality” Designed for use on professional tours, in stadiums, concert halls, festivals, houses of worship and other demanding audio environments, the Audio-Technica 5000 Series provides incredible audio quality and proven, critically acclaimed performance for artists, broadcasters and presenters worldwide. “Comprehensive tuning bandwith” For maximum versatility in ever-congested RF environment the dual-channel receiver provides a tuning bandwidth of 230 MHz (DG1: 470–700 MHz.). Both transmitters (HH/ATW-T5202 and BP/ATW-T5201) are available in two different frequency ranges – DE1 (470–590 MHz) and EG1 (580–700 MHz) – to provide complete coverage of the receiver’s bandwidth. “Designed for professionals” The transmitter provides highest possible wearing comfort due to small size - 64 mm × 70 mm × 17 mm (W × D × H), robust and ergonomic full metal body with concealed soft-touch controls, rugged cH-style connector for secure connection - just to name a few features that meet the needs of professional users. 4-pin connector The compact ATW-T5201 is equipped with Audio-Technica’s new rugged cH-style screw-down 4-pin connector for secure connection to A-T’s cH-style lavalier and headworn microphones, or cables Wide Bandwidth Body-pack transmitter provides 120 MHz UHF tuning bandwidth (DE1: 470–590 MHz, EG1: 580–700 MHz, GH1: 700–820). Backup frequency Unique multifunction button on the handheld and body-pack transmitters can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered Small Size Highest possible wearing comfort due to small size - 64 mm × 70 mm × 17 mm (W × D × H).

Audio-Technica’s third-generation 5000 Series wireless system Designed for use on professional tours, in stadiums, concert halls, festivals, houses of worship and other demanding audio environments, the Audio-Technica 5000 Series provides incredible audio quality and proven, critically acclaimed performance for artists, broadcasters and presenters worldwide. Audio-Technica’s third-generation, dual-receiver 5000 Series offers the highest-quality wireless live sound, with dual-compander circuitry that processes high and low frequencies separately and True Diversity operation. The receiver features a tuning bandwidth of 230 MHz (DG1): 470–700 MHz or a tuning bandwidth of 120 MHz (GH1): 700–820 MHz. You have the option of selecting a standard receiver (ATW-R5220) with two balanced XLR outputs or a receiver (ATW-R5220DAN) that also includes a Dante output. An antenna cascade output connects up to eight receivers, so a single pair of antennas can feed up to 16 channels of wireless. More features are the auto squelch function which automatically adjusts the squelch setting to maximize operating range while minimizing potential interference and a backup frequency that can be quickly swapped by pressing the transmitter’s multifunction button in the event of unexpected interference. Software enables remote monitoring and control of the wireless system. Two transmitters are available for use with the 5000 Series: ATW-T5201 body-pack transmitter and ATW-T5202 handheld transmitter. 5000 Series components and compatible accessories are offered as individual, à la carte products to give you the greatest possible flexibility in constructing a system that fits your needs. Please note that some frequency bands might not be available in your territory or could come with limited tuning bandwidth / transmitting power due to local regulations. For assistance with frequency coordination, please contact your regional Audio-Technica customer service representative. Dual-channel receiver provides 230 MHz (DG1: 470–700 MHz) or 120 MHz (GH1: 700–820 MHz) UHF tuning bandwidth for maximum versatility in an ever-congested RF environment Antenna cascade output allows 8 receivers to be connected so that a single pair of antennas can feed up to 16 channels of wireless. These connectors also provide a simple RF cable check feature to aid in RF troubleshooting Auto squelch feature automatically adjusts squelch setting to maximize range while minimizing potential interference Dual compander circuitry processes high and low frequencies separately for unmatched audio quality The full-rack receiver chassis holds two independent receivers, and offers antenna power, frequency scan and IR sync functionality, a ground-lift switch, and a front-panel headphone jack Dual-mode, highly visible OLED receiver screen can switch between standard view or a performance view that highlights key metering Receiver is available with two balanced XLR outputs (ATW-R5220) or with two balanced XLR outputs and a Dante output (ATW-R5220DAN) Advanced digital Tone Lock™ squelch effectively blocks stray RF; the digitally encoded tone also communicates transmitter data for receiver display Wireless network monitoring and control software 5000 Series components are offered individually – not as preconfigured systems – for greater flexibility “Dual compander for incredible audio quality” Designed for use on professional tours, in stadiums, concert halls, festivals, houses of worship and other demanding audio environments, the Audio-Technica 5000 Series provides incredible audio quality and proven, critically acclaimed performance for artists, broadcasters and presenters worldwide. “Comprehensive tuning bandwith” For maximum versatility in ever-congested RF environment the dual-channel receiver provides a tuning bandwidth of 230 MHz (DG1: 470–700 MHz.). Both transmitters (HH/ATW-T5202 and BP/ATW-T5201) are available in two different frequency ranges – DE1 (470–590 MHz) and EG1 (580–700 MHz) – to provide complete coverage of the receiver’s bandwidth. “Cascade output saves using an antenna distributor” The two antenna cascade outputs on the back of the unit can connect up to eight receivers, allowing a single pair of antennas to power up to 16 wireless channels. Wide Bandwidth Dual-channel receiver provides a tuning bandwidth of 230 MHz (DG1: 470–700 MHz) or 120 MHz (GH1: 700–820 MHz). IR-Sync IR-Sync functionality for a quick transfer of settings between transmitter and receiver. Dante Optional Receiver is available with two balanced XLR outputs (ATW-R5220) or with two balanced XLR outputs and a Dante output (ATW-R5220DAN). OLED screens Dual-mode, highly visible OLED receiver screen can switch between standard view or a performance view that highlights key metering

Hypercardioid Dynamic Instrument Microphone ATM250 A natural with high SPLs, the ATM250 hypercardioid dynamic is tailored for kick drum, percussion, brass and other highly dynamic instruments. Its rich, warm low-frequency response gives the microphone excellent presence. The microphone is equipped with a rare earth neodymium magnet and a tight hypercardioid polar pattern. Includes a professional isolation clamp to provide secure mounting, versatile positioning and effective dampening of unwanted mechanical noise. Handles very high SPL at close range Big, warm low-frequency response with excellent presence Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source Durable, proven performance for professional applications Hi-ENERGY® neodymium magnet for improved output and transient response Superior off-axis rejection for maximum gain before feedback Corrosion-resistant contacts from gold-plated XLRM-type connector Rugged, all-metal design and construction for years of trouble-free use

ATW-1102 System 10 Wireless Handheld Microphone System ATW-R1100 receiver and ATW-T1002 handheld dynamic unidirectional microphone/transmitter. Includes AT8456a Quiet-Flex stand clamp.

PRO44 πυκνωτικό μικρόφωνο boundary από την Audio Technica. Είναι χαμηλού προφίλ για διακριτική παρουσία στο χώρο, είναι εφοδιασμένο με διάφραγμα half-space μονής κατεύθυνσης, κατάλληλο για επιτραπέζια χρήση σε συνέδρια, περιλαμβάνει καλώδιο μήκους 7.6m.

PRO42 πυκνωτικό μικρόφωνο boundary από την Audio Technica κατάλληλο για ηχογραφήσεις, broadcasting. Είναι ιδιαίτερα διακριτικό, προορίζεται για επιτραπέζια χρήση, διαθέτει ενιαίο πολικό διάγραμμα, ανθεκτική κατασκευή με σταθερό καλώδιο μήκους 7.6m σε βύσμα XLR.

ATW-1101 ψηφιακό ασύρματο σετ μικροφώνου 2,4 GHz 24-bit / 48 kHz από την Audio-Technica. Εύκολο στη χρήση με αυτόματη επιλογή συχνότητας, δυνατότητα ρύθμισης βάσει συχνότητας, χρόνου και χώρου, αυτόματη επλογή συχνότητας, υποδοχείς εξόδου jack 6.3mm, XLR με επιλογή θορύβου.

ATW-13 ασύρματο σετ χειρός από την Audio-Technica. Ανήκει στην κατηγορία οικονομικών ασύρματων συστημάτων UHF AT-ONE, είναι ιδιαίτερα εύχρηστο, διαθέτει 2x 4κανάλια συχνοτήτων, ευανάγνωστη οθόνη δέκτη, δυνατότητα προσαρμογής σε rack.

ATW-11 ασύρματο σετ μικροφώνου πέτου από την Audio Technica. Χαρακτηρίζεται από μεγάλη ευχρηστία, διαθέτει 2x4 κανάλια συχνοτήτων, αυτονομία λειτουργίας μέχρι και 10 ώρες, εμβέλεια λειτουργίας εως και 10m, 10mW, antenna switching diversity, περιλαμβάνει AC adapter, κεραίες, θήκη.

MB4K πυκνωτικό μικρόφωνο για εφαρμογές studio από την Audio-Technica.  Διαθέτει καρδιοειδές πολικό διάγραμμα, αντικραδασμική ανάρτηση που μειώνει το θόρυβο χειρισμού, phantom power 11-52V DC 2 Ma, περιλαμβάνει κολάρο βάσης AT8405a.

MB2K δυναμικό μικρόφωνο χειρός κατάλληλο για όργανα και ενισχυτές από την Audio Technica.  Διαθέτει δυναμική κάψα νεοδυμίου, υπερκαρδιοειδές πολικό διάγραμμα, διακόπτη MagnaLock on/off, 3-pin βύσμα ενιαίο επιχρυσωμένο XLRM, 60-14000Hz, 600Ω.

ATR35CW πυκνωτικό μικρόφωνο πέτου από την Audio-Technica. Διαθέτει παντεκατευθυντικό πολικό διάγραμμα, είναι τερματισμένο με βύσμα HRS 4-pin για χρήση με AT UniPACK pody-pack ασύρματων πομπών.

Designed for use with brass, saxophone and other instruments, the ATM350U UniMount® mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument. When teamed with the included AT8491U universal clip-on mount and strong, flexible AT8490 5" gooseneck, the mic can be clipped securely to the bell of your instrument and positioned to stay where you want it – the gooseneck won’t flop around no matter how aggressively you move the instrument as you play. The microphone’s cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case. Features: Low-profile mic design for minimum visibility Crisp, clear, well-balanced microphone response, even at high SPLs Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source UniMount® universal clip-on mount attaches securely to instrument bell and provides excellent shock resistance for the microphone Rugged UniMount® 5" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise Interchangeable elements available for hypercardioid and omnidirectional polar patterns Included violin mount with hook-and-loop fastener provides an additional mounting option