Audac

The CEP series are professional 70/100V multi-channel energy-efficient amplifiers. The one unit height device comes into two models. The CEP408 offers four channels and has an output power of 80 Watt. Both low impedance as 70/100V, deliver high-quality amplification distributed over multiple zones in various applications. With its compact and lightweight design, the CEP series is designed with high efficiency and reliability by providing input linking through miniature switches at the back of the device in combination with Class-D amplifier technology. These switches allow daisy linking inputs from one channel to another by simply pressing the switch.The highly efficient Class-D amplifier technology delivers an uncompromised sound experience in the most effective way. The input connections are performed with 3-Pin Terminal block connectors while the output connections are performed with a 4-pin Terminal block connector.The multi-channel amplifier is Energy Star compliant yet can be enabled or disabled with a standby switch on the back of the device. This amplifier is an HE (1RU) 19” unit. In order to ensure maximum installer/maintenance convenience, the CEP is passively cooled.Same power, less energy usageThese multi-channel amplifiers are ENERGY STAR® compliant yet can be enabled or disabled with a standby switch on the back of the device, which enables or disables the 'Auto standby mode’.Silent passive coolingIn order to reach maximum installer and maintenance convenience all CEP series devices are fully passively cooled. This is an energy-efficient and silent solution for its cooling needs.Uncompromised sound experienceThe highly efficient Class-D amplifier technology delivers an uncompromised sound experience in the most effective way. Miniature switches at the back allow you to daisy link inputs from one channel to another by just a single press on the switch.Amplification for any applicationThese both low impedance as 70/100V amplifiers are designed to deliver high-quality amplification, distributed over multiple zones, like small offices, retail or a school environment.

The CEP series are professional 70/100V multi-channel energy-efficient amplifiers. The one unit height device comes into two models. The CEP408 offers four channels and has an output power of 80 Watt. Both low impedance as 70/100V, deliver high-quality amplification distributed over multiple zones in various applications. With its compact and lightweight design, the CEP series is designed with high efficiency and reliability by providing input linking through miniature switches at the back of the device in combination with Class-D amplifier technology. These switches allow daisy linking inputs from one channel to another by simply pressing the switch.The highly efficient Class-D amplifier technology delivers an uncompromised sound experience in the most effective way. The input connections are performed with 3-Pin Terminal block connectors while the output connections are performed with a 4-pin Terminal block connector.The multi-channel amplifier is Energy Star compliant yet can be enabled or disabled with a standby switch on the back of the device. This amplifier is an HE (1RU) 19” unit. In order to ensure maximum installer/maintenance convenience, the CEP is passively cooled.Same power, less energy usageThese multi-channel amplifiers are ENERGY STAR® compliant yet can be enabled or disabled with a standby switch on the back of the device, which enables or disables the 'Auto standby mode’.Silent passive coolingIn order to reach maximum installer and maintenance convenience all CEP series devices are fully passively cooled. This is an energy-efficient and silent solution for its cooling needs.Uncompromised sound experienceThe highly efficient Class-D amplifier technology delivers an uncompromised sound experience in the most effective way. Miniature switches at the back allow you to daisy link inputs from one channel to another by just a single press on the switch.Amplification for any applicationThese both low impedance as 70/100V amplifiers are designed to deliver high-quality amplification, distributed over multiple zones, like small offices, retail or a school environment.

Uncommon strength, common senseThe SCP series is a range of extremely powerful compact dual-channel power amplifiers for commercial use. These half 19” devices can be used in stereo low impedance or 70/100V bridge mode. There are 3 different models to serve a wide range of applications with power ratings that vary between 240W up to 600W in a half 19” rack space housing.The compact and elegant design of the half 19” rack space enclosure allows for single installation in a 10.5” equipment rack, or side-by-side (two devices) in a 19” equipment rack. Of course, desktop installation or mounting in an equipment rack using the MBS310 series mounting adapters is possible.You may wonder if so much power in such a small enclosure could cause some heating issues? Not at all, the SCP series is designed in a unique way so that optimal cooling is established, this by active cooling on the SCP224 and SCP230 in order to improve thermal comfort without the need for additional actions.A connection to the WP2xx series input wall panels or volume controllers can be made via the RJ45 connector on the back of the SCP. This allows for a cost-effective plug & play solution to extend or introduce brand new input possibilities and control options.Equipped with a standby mode switch, the SCP series will enter an energy-saving standby mode after a period of inactivity making him unique in the market. This feature together with the overall energy-efficient design makes the SCP meet the high standards of the Energy Star certification.When you combine the SCP series with a suitable pre-amplifier or wall-mounted input panel you create a relatively powerful and complete solution for background music installations.WP2xx & VC seriesThese input wall panels or volume controllers can be connected via a RJ45 connector on the back of the SCP. A cost-effective plug & play solution to extend or introduce brand new input possibilities and control options.Optimal coolingSo much power in such a small enclosure could cause some heating issues? Not at all, the SCP series are designed in a unique way so that optimal cooling is established, passive cooling on the SCP212 and active cooling on the SCP224 and SCP230.Same power, less energyOptimal power consumption with ENERGY STAR® compliant standby-functionality, easy controllable with a switch on the back of the device. Enable or disable the 'Auto standby mode' whenever you like.

Uncommon strength, common senseThe SCP series is a range of extremely powerful compact dual-channel power amplifiers for commercial use. These half 19” devices can be used in stereo low impedance or 70/100V bridge mode. There are 3 different models to serve a wide range of applications with power ratings that vary between 240W up to 600W in a half 19” rack space housing.The compact and elegant design of the half 19” rack space enclosure allows for single installation in a 10.5” equipment rack, or side-by-side (two devices) in a 19” equipment rack. Of course, desktop installation or mounting in an equipment rack using the MBS310 series mounting adapters is possible.You may wonder if so much power in such a small enclosure could cause some heating issues? Not at all, the SCP series is designed in a unique way so that optimal cooling is established, this by active cooling on the SCP224 and SCP230 in order to improve thermal comfort without the need for additional actions.A connection to the WP2xx series input wall panels or volume controllers can be made via the RJ45 connector on the back of the SCP. This allows for a cost-effective plug & play solution to extend or introduce brand new input possibilities and control options.Equipped with a standby mode switch, the SCP series will enter an energy-saving standby mode after a period of inactivity making him unique in the market. This feature together with the overall energy-efficient design makes the SCP meet the high standards of the Energy Star certification.When you combine the SCP series with a suitable pre-amplifier or wall-mounted input panel you create a relatively powerful and complete solution for background music installations.WP2xx & VC seriesThese input wall panels or volume controllers can be connected via a RJ45 connector on the back of the SCP. A cost-effective plug & play solution to extend or introduce brand new input possibilities and control options.Optimal coolingSo much power in such a small enclosure could cause some heating issues? Not at all, the SCP series are designed in a unique way so that optimal cooling is established, passive cooling on the SCP212 and active cooling on the SCP224 and SCP230.Same power, less energyOptimal power consumption with ENERGY STAR® compliant standby-functionality, easy controllable with a switch on the back of the device. Enable or disable the 'Auto standby mode' whenever you like.

Uncommon strength, common senseThe SCP series is a range of extremely powerful compact dual-channel power amplifiers for commercial use. These half 19” devices can be used in stereo low impedance or 70/100V bridge mode. There are 3 different models to serve a wide range of applications with power ratings that vary between 240W up to 600W in a half 19” rack space housing.The compact and elegant design of the half 19” rack space enclosure allows for single installation in a 10.5” equipment rack, or side-by-side (two devices) in a 19” equipment rack. Of course, desktop installation or mounting in an equipment rack using the MBS310 series mounting adapters is possible.You may wonder if so much power in such a small enclosure could cause some heating issues? Not at all, the SCP series is designed in a unique way so that optimal cooling is established, this by passive cooling on the SCP212 in order to improve thermal comfort without the need for additional actions.A connection to the WP2xx series input wall panels or volume controllers can be made via the RJ45 connector on the back of the SCP. This allows for a cost-effective plug & play solution to extend or introduce brand new input possibilities and control options.Equipped with a standby mode switch, the SCP series will enter an energy-saving standby mode after a period of inactivity making him unique in the market. This feature together with the overall energy-efficient design makes the SCP meet the high standards of the Energy Star certification.When you combine the SCP series with a suitable pre-amplifier or wall-mounted input panel you create a relatively powerful and complete solution for background music installations.WP2xx & VC seriesThese input wall panels or volume controllers can be connected via a RJ45 connector on the back of the SCP. A cost-effective plug & play solution to extend or introduce brand new input possibilities and control options.Optimal coolingSo much power in such a small enclosure could cause some heating issues? Not at all, the SCP series are designed in a unique way so that optimal cooling is established, passive cooling on the SCP212 and active cooling on the SCP224 and SCP230.Same power, less energyOptimal power consumption with ENERGY STAR® compliant standby-functionality, easy controllable with a switch on the back of the device. Enable or disable the 'Auto standby mode' whenever you like.

The BAE100 Bluetooth antenna extender kit, allows increasement of reception range for a Bluetooth (2.4 GHz) receiver when installed to a 19" equipment rack or any other (shielded) enclosure. The kit includes a 7 dBi (279 mm) antenna with a higher gain and reception range compared to most standard antenna's. It consists of a special multifunctional mounting bracket that offers the possibility to mount to a single 19" rack space enclosure.Mounting of the antenna on front of a 19" device (e.g. preamplifier with Bluetooth functionality) can also be done with the included 1 meter connection cable (SMA Male - Female), while the included 5 meter cable allows placement outside of the enclosure (e.g. wall mounting). Connections are made by SMA type connectors.

The BMP42 receiver offers wireless connection possibilities for audio playback from any Bluetooth-compatible portable device including laptops, smartphones, tablets or any other. A long-range transmission distance (up to 30 meters) is possible depending on the installed environment.Device discovery and pairing protection with storage of up to 8 authorized devices shall prevent playback from unauthorized users in public areas. All media information such as track and artist information can be retrieved from the BMP42 (if supported by the connected device), while playback control is possible from the connected device or remote control.

The VC3xx2 Series are 100 Volt wall volume controllers whereby the volume for 100 V loudspeakers can be adjusted in 11 steps of 3 dB. They feature a slim and good looking design and are constructed out of sturdy ABS, making them suitable for big projects in industrial environments as well as standard home interiors. An integrated 24 Volt relay allows bypassing of the volume controller in priority situations, making sure the message is always clearly heard at maximum volume. Connections are made using screw terminal blocks, and flush and surface mount boxes (WB3102) are separately available.

The WP225 is a remote wall mixer that can be used in combination with various AUDAC hardware (ARES5A, MTX series, AMP523 and more). It converts the signal coming from a stereo line-level audio source (such as a tuner, mobile devices, ... ) or balanced microphone to the level corresponding to the differential signal input making it possible to transfer high-quality audio over long distances between the wall panel and the loudspeaker, by just using inexpensive twisted-pair CAT5e or better cabling. On the front side of the wall panel, there is a 3.5 mm jack stereo line input connection available together with a balanced XLR microphone input, both provided with their own knob which allows the signals to be mixed together.It also features a Bluetooth receiver and pair button with a handy LED indicator to check if its in pairing mode or already connected to a device. Bluetooth pair name can be customized as desired. The Bluetooth receiver works with iPhones, iPads, iOS & Android smartphones, tablets, PC, Laptops, Desktops, etc...The WP225 is available in 2 colours (White - RAL9003 & Black - RAL9005) and is compatible with most standard EU (80x80 mm) style in-wall boxes for solid and hollow walls. With the Elegant ABS front panel with glass, it will blend into any environment.

The XMP44 is a professional modular audio system with 4 SourceCon™ interface card slots where to a wide variation of optional modules can be installed. The variety of available modules ranges from FM tuners to DAB&DAB+ tuners, internet radio tuners, voice file interfaces and many more. The flexible architecture allows any project combination up to four sources, resulting in a truly versatile solution that will live up the needs for any user taking high regard of crystal clear audio reproduction. Simultaneous operation for all four modules makes it a compact multi-source system which is the perfect expansion for any multi-zone audio system. The front panel of the system accommodates a 2.8” TFT display in combination with a push rotary function dial and 4 tactile pushbuttons. The controls and indicators on the front panel of the unit are guaranteeing an intuitive and user friendly operation, allowing hassle free operation and configuration to even unexperienced users. Four USB interfaces (one for each module) are enabling playback or storage of media and voice file, while pre-listening for each output is possible through a built-in PFL speaker with individual volume control. Both RS-232 and TCP/IP communication ports are implemented, allowing system integration with any home or industrial automation system. Using the freely available AUDAC Touch™ application for smart devices guarantees total system control and configuration from any device on any location and at any time. An optional Dante™ interface is available for the XMP44. The installation of this network interface allows receiving and sending of low latency, high quality audio over a standard Ethernet network. 

The WX502 is a powerful 2-way performance speaker suitable for a wide variety of applications, ensuring true-to-nature, high fidelity reproduction of music and speech. It is fitted with a 1” dome tweeter and a 5 1/4”low-frequency loudspeaker, capable of delivering a power of 50 Watt. It can be used in standard 8 Ohm systems but also in 70/100V PA systems with power taps for 40 Watt, 20 Watt and 10 Watt.The elegant shaped synthetic enclosure is available in two different colours (black & white), making it blend into any environment, going from standard indoor home to special indoor design interiors. The included steel mounting bracket allows horizontal and vertical mounting as well as focusing of the speaker and an integrated advanced protection network protects the tweeter against overload. This new series retains all its strengths but has also been upgraded in a few specific areas with installer convenience and durability in mind.The connection of the indoor loudspeakers is changed to a terminal block, which makes it easier to install and connect the WX MK2 series wall speaker, while daisy-chaining is made more convenient through additional connection terminals (4-pin).. Both indoor and outdoor versions are now equipped with an elegant rotatable AUDAC logo.

The COM108 is a compact but versatile public address mixing amplifier which offers solutions for small to medium size audio systems in commercial installations. Typical application are background music systems in retail stores, bars, restaurants and office buildings. The compact and simple design allows installation in any location and operation through any possible user. The amplifier is designed using Class-D amplifier technology and delivers an output power of 80 Watt to constant voltage (100V and 70V) or low impedance (4 Ohm) audio systems. A switch mode power supply allows compatibility with a wide variation of mains voltages for global compatibility. A stereo line input allows connection for a wide variation of audio sources such as media players, radio tuners, internet audio players, ... and many more. A balanced mic / line input allows connection for an announcement microphone with compatibility for condenser microphones using the integrated phantom power supply (15V). A priority switch overrides the background music when enabled, and compatibility with voice file players is guaranteed by the wide gain adjustment possibility (0 dB - +50 dB). The COM108 is a table-top standing device, while rack mounting in 10.5" or 19" equipment racks is possible using an optionally available mounting set (MBS310).

The COM104 is a compact but versatile public address mixing amplifier which offers solutions for small to medium size audio systems in commercial installations. Typical applications are background music systems in retail stores, bars, restaurants and office buildings. The compact and simple design allows installation in any location and operation through any possible user. The amplifier is designed using Class-D amplifier technology and delivers an output power of 40 Watt to constant voltage (100V and 70V) or low impedance (4 Ohm) audio systems. A switch mode power supply allows compatibility with a wide variation of mains voltages for global compatibility. A stereo line input allows connection for a wide variation of audio sources such as media players, radio tuners, internet audio players, ... and many more. A balanced mic/line input allows connection for an announcement microphone with compatibility for condenser microphones using the integrated phantom power supply (15V). A priority switch overrides the background music when enabled, and compatibility with voice file players is guaranteed by the wide gain adjustment possibility (0 dB - +50 dB). The COM104 is a table-top standing device, while rack mounting in 10.5" or 19" equipment racks is possible using an optionally available mounting set (MBS310).

The unbeatable one. The CENA series are full-range ceiling speakers, designed to offer an unmatched solution for large scale public address projects. The SpringFit™ fixation offers the fastest possible installation time of any speaker available on the market, while the borderless grill design is absolutely unseen for any ceiling speaker in this segment. With the selection of high-quality cone materials, exceptional intelligibility and background music performance are guaranteed. The CENA Series are equipped with SnapConnect™, a faster, more reliable and safer choice for fixed installations, accepting solid and stranded wires with sections up to 4.0 mm². The CENA506 features a 5” broadband driver with a continuous power handling of 10 Watt (RMS) and maximum power handling of 20 Watt. They are fitted by multi-tapping 100V line transformers with tappings for 6W and 3W.

The unbeatable one. The CENA series are full-range ceiling speakers, designed to offer an unmatched solution for large scale public address projects. The SpringFit™ fixation offers the fastest possible installation time of any speaker available on the market, while the borderless grill design is absolutely unseen for any ceiling speaker in this segment. With the selection of high-quality cone materials, exceptional intelligibility and background music performance are guaranteed. The CENA Series are equipped with SnapConnect™, a faster, more reliable and safer choice for fixed installations, accepting solid and stranded wires with sections up to 4.0 mm². The CENA706 features a 6.5” broadband driver with a continuous power handling of 10 Watt (RMS) and maximum power handling of 20 Watt. It is fitted with a multi-tapping 100V line transformer with tappings for 6W and 3W.

The ARES5A is a 2-way active speaker system consisting of an active and passive unit to be linked with each other. It offers an easy and flexible solution for a wide variety of applications.The 2-way loudspeaker is carefully constructed out of high quality components resulting in a 5 ¼” woofer and a ½” high frequency tweeter. This craftmanship in combination with an integrated DSP is creating an extremely clear and powerful sound experience for a wide range of applications. The integrated amplifier can deliver a power of 2 x 40 Watt and includes a stereo line input which is implemented balanced and unbalanced, allowing convenient connection to any kind of audio source. Unbalanced audio sources are connected through a 3.5 mm jack connector, while balanced sources can be connected to the terminal block input connection allowing long signal runs without interference. A volume potentiometer allows the user to adjust the level of loudness while the two-band tone control allows equalization of treble and bass. The auto-standby mode reduces power consumption when no input signal is detected. The active speaker includes a stereo amplifier module, also delivering the input signal to the passive unit. SYSTEM SPECIFICATIONS RMS Power 2 x 20 W Dynamic power 2 x 40 W Sensitivity (1W/1m) 89 dB Sound Pressure (Max. W/1m) 105 dB Frequency Response (± 3 dB) 80 Hz - 20 kHz Auto Standby mode (ENERGY STAR® compliant) Standby time 20 minutes Power Supply 100 ~ 240 V AC / 50 ~ 60 Hz Connector IEC C7/C8 power inlet Connectors Remote control RJ45 Outputs Passive loudspeaker 2-pin Euro Terminal Block (Pitch - 5.08 mm) Drivers HF 13 mm (PEI tweeter) LF 5 1/4" (Polypropylene) Dispersion Horizontal 210° (Average -6 dB / 100 Hz – 10 kHz) Vertical 205° (Average -6 dB / 100 Hz – 10 kHz) Power Consumption Nominal (1/8 MUP) 11.3 W Standby < 0.35 W Inputs Balanced Stereo Connector 2 x 3-pin Euro Terminal Block (Pitch - 3.81 mm) Unbalanced Stereo Connector 3.5 mm Jack (2x) Remote Connector RJ45 PRODUCT FEATURES Dimensions 150 x 240 x 146 mm (W x H x D) (excl bracket) & 150 x 240 x 194 mm (incl bracket) Weight 3.5 kg (pair) Colours Black (RAL9003) White (RAL9005) Construction ABS Front finish Powder coated steel grill with lining Bracket Powder Coated steel Construction Impact & UV resistant ABS Colours White (RAL9003) (ARES5A/W) Black (RAL9005) (ARES5A/B) Accessories Included Mounting bracket Power cable 3.5 m connection cable speaker Wall screws and plugs

Designed to offer the best value for money ratio. The CIRA series are coaxial 2-way ceiling speakers featuring exceptional intelligibility and musical performance. The TwistFix™ borderless grill design offers easy but solid assembly and a completely seamless transition from grill to ceiling. This results in a perfect blend in to its environment. The QuickFit™ installation system combined with FastCon™ connector offers lifetime stability and great installers convenience.The CIRA7 features a 6.5” driver using polypropylene cone material, combined with a 1” Mylar tweeter fitted with a phase plug for excellent off axis performance. The selected materials guarantee a low distortion performance with smooth and flat frequency response. A continuous power handling of 30 Watt (RMS) and maximum power handling of 60 watt is achieved, while fitted with a multi-tapping 100V line transformer with tappings for 24W, 12W, 6W and an 8 Ohm or 16 Ohm bypass connection.Specifications:Max. Power: 60 WRMS Power: 30 WSensitivity (1W/1m): 88 dBSpeaker type: 2-way coaxialImpedance: 8 Ω Connectors: Multi-tap Fast-con™ connectionsSound Pressure (Max. W/1m): @ 100 V: 103 dBFrequency: Response (± 3 dB): 55 Hz - 20 kHzRange (-10 dB): 45 Hz - 20 kHzDispersion: Conical: 150°​​

Designed to offer the best value for money ratio. The CIRA series are coaxial 2-way ceiling speakers featuring exceptional intelligibility and musical performance. The TwistFix™ borderless grill design offers easy but solid assembly and a completely seamless transition from grill to ceiling. This results in a perfect blend in to its environment. The QuickFit™ installation system combined with FastCon™ connector offers lifetime stability and great installers convenience.The CIRA5 features a 5 ¼” driver using polypropylene cone material, combined with a 1” Mylar tweeter fitted with a phase plug for excellent off axis performance. The selected materials guarantee a low distortion performance with smooth and flat frequency response. A continuous power handling of 30 Watt (RMS) and maximum power handling of 60 watt is achieved, while fitted with a multi-tapping 100V line transformer with tappings for 6W, 3W, 1.5W and an 8 Ohm or 16 Ohm bypass connection.Specifications:Max. Power: 60 WRMS Power: 30 WSensitivity (1W/1m): 87 dBSpeaker type: 2-way coaxialImpedance: 16ΩConnectors: Multi-tap Fast-con™ connectionsSound Pressure (Max. W/1m): @ 100 V: 102 dBFrequency: Response (± 3 dB): 60 Hz - 20 kHz 

Designed to offer the best value for money ratio. The CIRA series are coaxial 2-way ceiling speakers featuring exceptional intelligibility and musical performance. The TwistFix™ borderless grill design offers easy but solid assembly and a completely seamless transition from grill to ceiling. This results in a perfect blend in to its environment. The QuickFit™ installation system combined with FastCon™ connector offers lifetime stability and great installers convenience.The CIRA8 features a 8” driver using polypropylene cone material, combined with a 1” Mylar tweeter fitted with a phase plug for excellent off axis performance. The selected materials guarantee a low distortion performance with smooth and flat frequency response. A continuous power handling of 40 Watt (RMS) and maximum power handling of 80 watt is achieved, while fitted with a multi-tapping 100V line transformer with tappings for 24W, 12W, 6W and an 8 Ohm & 16 Ohm bypass connection.Specifications:Max. Power: 80 WRMS Power: 40 WSensitivity (1W/1m): 89 dBSpeaker type: 2-way coaxialImpedance: 8 ΩConnectors: Multi-tap Fast-con™ connectionsSound Pressure (Max. W/1m): @ 100 V: 105 dBFrequency: Response (± 3 dB): 40 Hz - 20 kHzRange (-10 dB): 33 Hz - 20 kHzDispersion: Conical: 140° 

The PRE116 is a 6 channel stereo preamplifier containing a variety of input possibilities for microphone and line level audio signals, offering a possibility for a wide range of small to medium sized audio installations in various kinds of applications. It features two balanced mono inputs with phantom power and three band tone control allowing connection of microphones or line level signal sources. The switchable talkover function suppresses background music if a priority signal is present, making it suitable for paging or voice file announcements. The four stereo line level inputs are implemented as a balanced one fitted with XLR connectors and three unbalanced ones fitted with RCA connectors. Hereby, connection possibilities for a wide variety of line level sources is guaranteed. Additionally, an integrated Bluetooth receiver (mixed with Ch 3) and 3.5 mm jack connection on its front panel (mixed with Ch 4) are offering convenient wired or wireless connection possibilties for portable and handheld devices including laptops, smartphones and tablets. A priority mute contact suppresses all (nonpriority) music sources in case of contact closure, allowing to link autonomous alarm systems. Input volume control is done using the corresponding rotary dials on the front panel, while the output section features a 6-segment LED VU bar, a master volume control and 2-band tone control. Connections and input or output configurations such as gain adjustment and mono/stereo switching can be done through the provided controls on the back of the device.SYSTEM SPECIFICATIONSInputs Bluetooth receiver (mixed with Ch 3)Front 3.5mm Jack (mixed with Ch )Priority mute contactSignal / Noise > 90 dBTHD+N (@ 1 kHz) < 0.05%Crosstalk (@ 1 kHz) > 70 dBFrequency Response (± 3 dB) 20 Hz - 20 kHzPower Supply 100 ~ 240 V AC / 50 ~ 60 HzConsumption 12 WInputs Balanced Microphone Type 2 x Balanced MicrophoneBalanced Stereo Type 2 x Stereo Balanced LineUnbalanced Stereo Type 3 x Stereo Unbalanced LineOutputs Balanced Stereo Type 1 x Balanced Stereo outputsInputs Microphone Sensitivity (1W/1m) -6 dB ~ -50 dBLine Sensitivity (1W/1m) -20 dB ~ +4 dBBalanced Microphone Phantom Power 15 V DCOutputs EQ Treble 15 dB (2.5~20 kHz)Bass 15 dB (100 Hz)Inputs Balanced Microphone EQ High 15 dB (12.5 kHz)Mid 15 dB (2.5 kHz)Low 15 dB (80 Hz)PRODUCT FEATURESDimensions 482 x 44 x 335 mm (W x H x D)Weight 4,10 kgUnit height 1 HE

The MTX48 is the four-zone version of the MTX series, containing two balanced microphone inputs with priority function, phantom power possibility and three-band tone control. Four stereo line-level inputs are provided to which any line-level music source such as a CD-player, tuner or MP3 player can be connected. The other two inputs of the matrix are the additional wall panel inputs for both line and microphone signals. The MTX can be controlled by means of additional control panels, its fully functional web based interface or the AUDAC Touch app. Using the freely available AUDAC Touch™ application for smart devices guarantees total system control and configuration from any device on any location and at any time. The RS232 port makes the MTX compatible with any home & industrial automation systems supporting RS232. The front panel of the MTX shows a rotary button per zone with indication LEDs for accessing controls and settings. A built-in PFL loudspeaker makes it possible to pre-listen every channel without the need for a headphone. The balanced line-level zone output connections are performed using 3-pin Euro-terminal block connectors, each of them accompanied with an RJ45 connector for connecting additional wall panels for that zone. A 24 volts’ power connection makes it possible to keep the MTX running on emergency power, even if the main power is shut down. Download the AUDAC system manager software here.Get the AUDAC Touch™ app.SYSTEM SPECIFICATIONSCrosstalk (@ 1 kHz) -85 dBControl Front panelRS-232TCP/IP (RJ45)Wall panel (RS-485)Audac Touch™Web (HTML5)Web (Flash)Outputs Impedance 51 ΩLevel -70 dB ~ 0 dBFrequency Response (± 3 dB) 20 Hz - 20 kHzPower Consumption 12 WSupply 100 ~ 240 V AC / 50 ~ 60 Hz24 V DC (emergency Power)Inputs Balanced Microphone Type 2 x Balanced MicrophoneConnector XLRSensitivity (1W/1m) 0 dBV ~ 50 dBVPhantom Power 15 V DCSignal / Noise > 80 dBTHD+N (@ 1 kHz) < 0.05 dBUnbalanced Stereo Type 4 x Stereo Unbalanced LineConnector RCASensitivity (1W/1m) -14 dB ~ +9 dBSignal / Noise > 100 dBTHD+N (@ 1 kHz) < 0.01 dBWall Panel Type 4 x Wall panel inputConnector RJ45Other Type Priority mute contactOutputs Balanced Stereo Type 3-pin Euro Terminal Block (Pitch - 3.81 mm)EQ Treble ± 14 dB (2.5~20 kHz)Bass ± 14 dB (100 Hz)Inputs Balanced Microphone EQ High ± 15 dB (12.5 kHz)Mid ± 15 dB (2.5 kHz)Low ± 15 dB (80 Hz)PRODUCT FEATURESDimensions 482 x 88 x 335 mm (W x H x D)Weight 4.750 kgUnit height 2 HE

The CAP Series are professional 100V multi-channel power amplifiers, containing various models with different channels and different output power configuration. The CAP424 is a four channel version with an output power 240 Watt. This way, a flexible solution is created for multi-zone audio distribution systems with four zones. They are designed as no-nonsense amplifiers with only the necessary controls and connections which creates great simplicity in use and installation. A high efficiency and reliability of the devices is achieved by using switching power supplies in combination with Class-D amplifier technology. A temperature controlled FAN constantly keeps all parts within the right operation range, while avoiding excessive buzz. A built-in multipurpose protection circuit protects against DC malfunction, Short circuit, overheating, overload and limits the signal when necessary. The input connections are performed using balanced XLR connectors and Link output connectors are provided for link through to other amplifiers. Besides, a high-pass filter switch (400 Hz) and a gain adjustment potentiometer are provided for each channel. The output connections are performed using reliable terminal block connectors and this all is housed into a solid constructed, double rack space (2 HE) 19” rack mounting housing.Specifications: RMS Power: 4 x 240 WOutput Voltage / Impedance: 100V (42 Ohm)THD+N: 100 dBPower Supply: 230 - 240V AC / 50 HzDimensions: 482 x 88 x 420 mmWeight: 8.35 kg 

The CAP series are professional 100V multi-channel power amplifiers. The CAP224 offers two channels and has an output power of 240 Watt. This way, a flexible solution is created for multi-zone audio distribution systems with two independent zones. They are designed as no-nonsense amplifiers with only the necessary controls and connections which creates great simplicity in use and installation. A high efficiency and reliability of the device is achieved by using switching power supplies in combination with Class-D amplifier technology. A temperature controlled fan constantly keeps all parts within the right operation range while avoiding excessive buzz.A built-in multipurpose protection circuit protects against DC malfunction, short circuit, overheating, overload and limits the signal when necessary. The input connections are performed using balanced XLR connectors and link output connectors are provided for link through to other amplifiers. Besides, a high-pass filter switch (400 Hz) and a gain adjustment potentiometer are provided for each channel. The output connections are performed using reliable terminal block connectors and this all is housed into a solid constructed, double rack space (2 HE) 19” rack mounting housing.Specifications: RMS Power: 2 x 240 WOutput Voltage / Impedance: 100 V (42 Ohm)THD+N: 100 dBPower Supply: 230 - 240V AC / 50 HzDimensions (W x H x D): 482 x 88 x 420 mmWeight: 7.2 kg 

This energy efficient stereo amplifier will automatically switch to a standby mode when no audio signals are detected (less than 1Watt power consumption in standby mode).Their weight and compact size makes these single rack space amplifiers ideal for both fixed and mobile installations. Their use of Class-D technology ensures excellent efficiency as well as outstanding sound quality. Thanks to the complete passively cooled entity only a minimal of maintenance is needed, while ensuring maximum reliability. The quad channel construction consists of four channels with the possibility to use two independent stereos. In combination with the integrated active crossover network, it offers a complete solution for compact stereo applications with a bass cabinet. Various specific functions and advanced circuitry guarantees an optimal protection against DC malfunctioning, short circuit, overheating and overload.Signal input connections are integrated with balanced XLR connectors, and signal link through is possible using the XLR output connectors. Outputs are connected using terminal block connectors.Specifications:RMS power @ 4 Ohm Stereo: 4 x 250WRMS power @ 8 Ohm Stereo: 4 x 130WRMS power @ 8 Ohm Bridge: 2 x 500WFrequency Response: 20 Hz - 20 kHzSignal / Noise: > 90 dBTHD+N by 1 kHz (1/2 Rated Power): < 0.1%Crosstalk: > 70 dBTechnology: Class - DPower supply: Switching modePower supply range: 230-240V AC - 50/60 HzInput Sensitivity: 0 dB (1V RMS)Input Impedance: 12 k Ohm balancedProtection: DC Short-circuit, Over heating, Over load, Signal limitingCooling system: Convection cooledOperation temperature: 0° ~ 40° at 95% humidityConnectors - input: XLR inputConnectors - output: 2-pin terminal block (5.08 mm)Power consumption: 438 Watt (1/3 MOP at 1 kHz)Dimensions: 482 x 44 x 330 mmWeight: 4.7 kg

This energy efficient stereo amplifier will automatically switch to a standby mode when no audio signals are detected (less than 1Watt power consumption in standby mode).Their weight and compact size makes these single rack space amplifiers ideal for both fixed and mobile installations. Their use of Class-D technology ensures excellent efficiency as well as outstanding sound quality. Thanks to the complete passively cooled entity only a minimal of maintenance is needed, while ensuring maximum reliability. Various specific functions and advanced circuitry guarantees an optimal protection against DC malfunctioning, short circuit, overheating and overload. Signal input connections are integrated with balanced XLR connectors, and signal link through is possible using the XLR output connectors. Outputs are connected using terminal block connectors.Specifications:RMS power @ 4 Ohm Stereo: 2 x 500WRMS power @ 8 Ohm Stereo: 2 x 250WRMS power @ 8 Ohm Bridge: 1000WFrequency Response: 20 Hz - 20 kHzSignal / Noise: > 90 dBTHD+N by 1 kHz (1/2 Rated Power): < 0.1% Crosstalk > 70 dBCrosstalk: > 70 dBTechnology: Class - DPower supply: Switching modePower supply range: 230-240V AC - 50/60 HzInput Sensitivity: 0 dB (1V RMS)Input Impedance: 12 k Ohm balancedProtection: DC Short-circuit, Over heating, Over load, Signal limitingCooling system: Convection cooledOperation temperature: 0° ~ 40° at 95% humidityConnectors - input: XLR input & signal linkthroughConnectors - output: Speakon compatible & 2-pin terminal block (5.08 mm)Operating Temperature: 0° ~ 40° C at 95% humidityPower consumption: 426 Watt (1/3 MOP at 1 kHz)Dimensions: 482 x 44 x 330 mmWeight: 4.7 kg

This energy efficient stereo amplifier will automatically switch to a standby mode when no audio signals are detected (less than 1Watt power consumption in standby mode).Their weight and compact size makes these single rack space amplifiers ideal for both fixed and mobile installations. Their use of Class-D technology ensures excellent efficiency as well as outstanding sound quality. Thanks to the complete passively cooled entity only a minimal of maintenance is needed, while ensuring maximum reliability. Various specific functions and advanced circuitry guarantees an optimal protection against DC malfunctioning, short circuit, overheating and overload. Signal input connections are integrated with balanced XLR connectors, and signal link through is possible using the XLR output connectors. Outputs are connected using terminal block connectors.Specifications:RMS power @ 4 Ohm Stereo: 2 x 250WRMS power @ 8 Ohm Stereo: 2 x 130WRMS power @ 8 Ohm Bridge: 500WFrequency Response: 20 Hz - 20 kHzSignal / Noise: > 90 dBTHD+N by 1 kHz (1/2 Rated Power): < 0.1%Crosstalk: > 70 dBTechnology: Class - DPower supply: Switching modePower supply range: 100-240V AC - 50/60 HzInput Sensitivity: 0 dB (1V RMS)Input Impedance: 12 k Ohm balancedProtection: DC Short-circuit, Over heating, Over load, Signal limitingCooling system: Convection cooledOperation temperature: 0° ~ 40° at 95% humidityConnectors - input: XLR input & signal linkthroughConnectors - output: Speakon compatible & 2-pin terminal block (5.08 mm)Power consumption: 224 Watt (1/3 MOP at 1 kHz)Dimensions: 482 x 44 x 330 mmWeight: 4.4 Kg

This energy efficient stereo amplifier will automatically switch to a standby mode when no audio signals are detected (less than 1Watt power consumption in standby mode).Their weight and compact size makes these single rack space amplifiers ideal for both fixed and mobile installations. Their use of Class-D technology ensures excellent efficiency as well as outstanding sound quality. Thanks to the complete passively cooled entity only a minimal of maintenance is needed, while ensuring maximum reliability.Various specific functions and advanced circuitry guarantees an optimal protection against DC malfunctioning, short circuit, overheating and overload. Signal input connections are integrated with balanced XLR connectors, and signal link through is possible using the XLR output connectors. Outputs are connected using terminal block connectors.Specifications:RMS power @ 4 Ohm Stereo: 2 x 150WRMS power @ 8 Ohm Stereo: 2 x 80WRMS power @ 8 Ohm Bridge: 300WFrequency Response: 20 Hz - 20 kHzSignal / Noise: > 90 dBTHD+N by 1 kHz (1/2 Rated Power): < 0.1%Crosstalk: > 70 dBTechnology: Class - DPower supply: Switching modePower supply range: 100-240V AC - 50/60 HzInput Sensitivity: 0 dB (1V RMS)Input Impedance: 12 k Ohm balancedProtection: DC Short-circuit, Over heating, Over load, Signal limitingCooling system: Convection cooledOperation temperature: 0° ~ 40° at 95% humidityConnectors - inputs: XLR input & signal linkthroughConnectors - outputs: Speakon compatible & 2-pin terminal block (5.08 mm)Power consumption: 145 Watt (1/3 MOP at 1 kHz)Dimensions: 482 x 44 x 330 mm​ 

This energy efficient stereo amplifier will automatically switch to a standby mode when no audio signals are detected (less than 1Watt power consumption in standby mode).Their weight and compact size makes these single rack space amplifiers ideal for both fixed and mobile installations. Their use of Class-D technology ensures excellent efficiency as well as outstanding sound quality. Thanks to the complete passively cooled entity only a minimal of maintenance is needed, while ensuring maximum reliability. The quad channel construction consists of four channels with the possibility to use two independent stereos. In combination with the integrated active crossover network, it offers a complete solution for compact stereo applications with a bass cabinet. Various specific functions and advanced circuitry guarantees an optimal protection against DC malfunctioning, short circuit, overheating and overload. Signal input connections are integrated with balanced XLR connectors, and signal link through is possible using the XLR output connectors. Outputs are connected using terminal block connectorsSpecifications:RMS power @ 4 Ohm Stereo: 4 x 100WRMS power @ 8 Ohm Stereo: 4 x 50WRMS power @ 8 Ohm Bridge: 2 x 200WFrequency Response: 20 Hz - 20 kHzSignal to Noise ratio: > 90 dBTHD+N by 1 kHz (1/2 Rated Power): < 0.1%Crosstalk: > 70 dBTechnology: Class - DPower supply: Switching modePower supply range: 100-240V AC - 50/60 HzInput Sensitivity: 0 dB (1V RMS)Input Impedance: 12 k Ohm balancedProtection: DC Short-circuit, Over heating, Over load, Signal limitingCooling system: Convection cooledOperation temperature: 0° ~ 40° at 95% humidityConnectors - input: XLR inputConnectors - output: 2-pin terminal block (5.08 mm)Power consumption: 188 Watt (1/3 MOP at 1 kHz)Dimensions: 482 x 44 x 330 mm 

The CMX726 is an headset condenser microphone with an omnidirectional pickup pattern, designed for a wide variation of vocal and speech applications. The back-electret condenser capsule with flat frequency response guarantees a pristine audio quality true to the speakers voice and intonation. The high SPL capabilities guarantee a true reporoduction without distortion even while exposed to hard and vigurous sounds. The construction is lightweight and ergonomically designed, guaranteeing a comfortable fit with minimum visual impact. The dual-ear construction allows it for being used for even the most energetic performances. A drop stopper on the microphone boom avoids humidity to reach the microphone cell, while bending and position adjustment allows optimal positioning. A connector splits the cable from the microphone, allowing quick exchange which is valuable for both service use or when used in combination with different types of transmitters. The microphone comes with 4 types of connectors included, making it suitable for use with different major systems manufacturers. Additional connector types are optionally available.Available in dark (black) and light skin colour and comes with windscreen and cable clip for anchoring to clothing included. Features:Pristine audio qualityMinimum visual impactFlat frequency responseOmni-directional pick-up patternComfortable lightweight design with adjustabe boomDual ear design for use in active situationsAdapts to various wireless systemsReplaceable / serviceable cable & connectors4 Connector types includedSpecifications:Microphone type: Back electret condenserFrequency Response: 20 Hz – 20 kHzPolar pattern: Omni-directionalSensitivity: 42 dB ± 3 dBImpedance: 2 k Ω ± 30%Max. SPL: 135 dBSupply range: 1.5 ~ 9 V DCConnection cable: 1.2 meter

he APM is a microphone base, designed to be used with the CMX series gooseneck microphones (or any other gooseneck microphone with XLR connector) on any amplifier with microphone inputs.

The COM12 is a public address amplifier, with a power up to 120 W. It contains a wide variation of input possibilities for all kinds of connection purposes, such as 2 unbalanced stereo line level inputs which are switchable between Line and Microphone level, 2 balanced inputs which are switchable between Line and Microphone level, and two balanced inputs which are selectable between Line and Microphone level with priority settings and phantom power.

The COM24 is a public address amplifier, with a power up to 240 W. It contains a wide variation of input possibilities for all kinds of connection purposes, such as 2 unbalanced stereo line level inputs which are switchable between Line and Microphone level, 2 balanced inputs which are switchable between Line and Microphone level, and two balanced inputs which are selectable between Line and Microphone level with priority settings and phantom power.

The CAP412 is a professional four channel 100V power amplifier which is capable of providing 120 Watt to each of the four separate output channels. This creates a great flexibility and new possibilities for installed Multi-Zone audio distribution systems.

The CMX382 is a hanging condenser microphone with a slim and miniature design. It is designed for offering versatile solutions for sound reinforcement or recording systems in a wide variation of applications. Typical applications range from speech in meeting or conference rooms to music in houses of worship, orchestra’s, choirs and many others. The tailored frequency response guarantees a rich, clear and sensitive sound reproduction while the cardioid directivity characteristic eliminates feedback and unwanted noise. The included spiral hanging bracket makes overhead suspension possible above conference tables, choirs, orchestra’s, ... while the flexing gooseneck structure allows a highly accurate positioning. The microphone comes delivered with a fixed connection cable with a total length of 3 meters which is fitted with a 4-pin Mini-XLR connector. An included phantom power adapter with standard 3-pin XLR connector converts the supplied phantom voltage and allows connection to standard pre-amplifiers or mixers. The included windscreen reduces unwanted and popping sounds. In comparison with the already known CMX380 microphone, the CMX382 contains an improved spiral hanging bracket and a flexing gooseneck structure which makes highly accurate positioning possible. The included phantom power adapter with low-noise characteristics guarantees improved overall signal/noise performance.Specifications:Type: Back electret condenserPolar Pattern: Cardioid (Uni-directional)Frequency Response: 50 Hz - 18 kHzSensitivity: 42 dB ±3 dB / Pa (at 1 kHz)Impedance: 200 Ohm ± 30 %Max. SPL: 130 dBSignal-to-noise ratio: 75 dBPower supply: 10 - 52 V DC Phantom powerDimensions: Ø13.5 (head Ø) x 160 (length) mmWeight net: 100 g  

The ATEO6 is the 6” version, with a 1” dome tweeter and a 6” Mid / Low frequency driver, ensuring a true-to-nature, high-fidelity reproduction of music and speech. It features a stunningly designed and elegant looking ABS housing which is fitted with high-quality components.What makes this loudspeaker range so exceptional is the especially designed mounting bracket using the Clevermount™ technology, making the loudspeakers cabinet flow together with the mounting bracket providing a great ease for installing the loudspeaker in one good-looking entity. The mounting and connection of the loudspeaker simply happens by attaching the included metal wall-plate to the desired location. When mounted, the wires must be connected to the desired terminal of the custom connection block. The desired power tap for 100 Volt or 8 Ohm can be selected by picking the right terminal. After this is done, only five seconds of work is left for clipping the loudspeaker onto the wall-plate, tightening the safety screw and you’re ready to rock! This way, it’s really child’s play to install a large number of loudspeakers in no-time. Even if you’re working all alone while people are watching your fingers or when installing the speakers up high, when you’re standing on a ladder. All ATEO series speakers are available in black (/B) or white (/W).Specifications:RMS power: 60 WMax Power: 120 WPower Taps / Impedance: 50 / 25 / 12.5 / 6.25 W 8 OhmSensitivity (1W / 1m): 89 dBSPL W/1m @ 8 Ohm: 106 dBSPL W/1m @ 100V: 105 dBFrequency response (±3dB): 65 Hz - 20 kHzFrequency range (-10dB): 55 Hz - 20 kHzDimensions (W x H x D): 194 x 350 x 220 mmWeight: 3.82 kgColor: white  

The WX302 is a powerful 2-way performance speaker suitable for a wide variety of applications, ensuring true-to-nature, high fidelity reproduction of music and speech. It is fitted with a 1” dome tweeter and a 3” low-frequency loudspeaker, capable of delivering a power of 30 Watt. It can be used in standard 8 Ohm systems but also in 70/100V PA systems with power taps for 20 Watt, 10 Watt and 5 Watt. The elegant shaped synthetic enclosure is available in two different colours (black and white), making it blend into any environment going from standard indoor home to special indoor design interiors. The included steel mounting bracket allows horizontal and vertical mounting as well as focusing of the speaker and an integrated advanced protection network protects the tweeter against overload.This new series retains all its strengths but has also been upgraded in a few specific areas with installer convenience and durability in mind. The connection of the indoor loudspeakers is changed to a terminal block, which makes it easier to install and connect the WX MK2 series wall speaker, while daisy-chaining is made more convenient through additional connection terminals (4-pin).. Both indoor and outdoor versions are now equipped with an elegant rotatable AUDAC logo.

The ATEO4 is the 4” version with a 1” dome tweeter and a 4” Mid / Low frequency driver, ensuring a true to- nature, high-fidelity reproduction of music and speech. It features a stunningly designed and elegant looking ABS housing which is fitted with high-quality components.What makes this loudspeaker range so exceptional is the especially designed mounting bracket using the Clevermount™ technology, making the loudspeakers cabinet flow together with the mounting bracket providing a great ease for installing the loudspeaker in one good-looking entity. The mounting and connection of the loudspeaker simply happens by attaching the included metal wall-plate to the desired location.When mounted, the wires must be connected to the desired terminal of the custom connection block. The desired power tap for 100 Volt or 8 Ohm can be selected by picking the right terminal. After this is done, only five seconds of work is left for clipping the loudspeaker onto the wall-plate, tightening the safety screw and you’re ready to rock! This way, it’s really child’s play to install a large number of loudspeakers in no-time. Even if you’re working all alone while people are watching your fingers or when installing the speakers up high, when you’re standing on a ladder. All ATEO series speakers are available in black (/B) or white (/W).Specifications:MS Power: 35 WMax Power: 70 WPower Taps / Impedance: 24 / 12 / 6 / 3 W 4 OhmSensitivity (1W / 1m): 86 dBSPL W/1m @ 8 Ohm: 101 dBSPL W/1m @ 100V: 100 dBFrequency response (±3dB): 100 Hz - 20 kHzFrequency Range (-10 dB): 65 Hz - 20 kHzDimensions (W x H x D): 137 x 244 x 154 mmWeight: 2.05 kgColor: black

The ATEO4 is the 4” version with a 1” dome tweeter and a 4” Mid / Low frequency driver, ensuring a true to- nature, high-fidelity reproduction of music and speech. It features a stunningly designed and elegant looking ABS housing which is fitted with high-quality components.What makes this loudspeaker range so exceptional is the especially designed mounting bracket using the Clevermount™ technology, making the loudspeakers cabinet flow together with the mounting bracket providing a great ease for installing the loudspeaker in one good-looking entity. The mounting and connection of the loudspeaker simply happens by attaching the included metal wall-plate to the desired location.When mounted, the wires must be connected to the desired terminal of the custom connection block. The desired power tap for 100 Volt or 8 Ohm can be selected by picking the right terminal. After this is done, only five seconds of work is left for clipping the loudspeaker onto the wall-plate, tightening the safety screw and you’re ready to rock! This way, it’s really child’s play to install a large number of loudspeakers in no-time. Even if you’re working all alone while people are watching your fingers or when installing the speakers up high, when you’re standing on a ladder. All ATEO series speakers are available in black (/B) or white (/W).Specifications:MS Power: 35 WMax Power: 70 WPower Taps / Impedance: 24 / 12 / 6 / 3 W 4 OhmSensitivity (1W / 1m): 86 dBSPL W/1m @ 8 Ohm: 101 dBSPL W/1m @ 100V: 100 dBFrequency response (±3dB): 100 Hz - 20 kHzFrequency Range (-10 dB): 65 Hz - 20 kHzDimensions (W x H x D): 137 x 244 x 154 mmWeight: 2.05 kgColor: white​

The ATEO 2 is the ultra-compact model of this series which smoothly integrates into any interior like no other loudspeaker. The sound originates from a 2” aluminum cone driver which provides a full-range, warm and detailed sound, with an improved response in the low frequencies due to the ported design.This way, a smooth sound reproduction with clear and crisp sound is guaranteed. The internal self-resetting network provides an optimal overload protection. It features a stunningly designed and elegant looking ABS housing which is fitted with high quality components.What makes this loudspeaker range so exceptional is the specially designed mounting bracket using Clevermount™ technology, making the loudspeakers cabinet flow together with the mounting bracket providing a great ease for installing the loudspeaker in one good-looking entity. Specifications:RMS Power: 10 WattMax Power: 20 WattImpedance: 8 OhmSensitivity (1 W / 1 m): 83 dBMax SPL: 93 dBFrequency Response (±3 dB): 120 Hz - 20 kHzFrequency Range (-10 dB): 100 Hz - 20 kHzDimensions (W x H x D): 80 x 136 x 111.5 mmWeight: 0.39 KgColor: black

The ATEO 2 is the ultra-compact model of this series which smoothly integrates into any interior like no other loudspeaker. The sound originates from a 2” aluminum cone driver which provides a full-range, warm and detailed sound, with an improved response in the low frequencies due to the ported design.This way, a smooth sound reproduction with clear and crisp sound is guaranteed. The internal self-resetting network provides an optimal overload protection. It features a stunningly designed and elegant looking ABS housing which is fitted with high quality components.What makes this loudspeaker range so exceptional is the specially designed mounting bracket using Clevermount™ technology, making the loudspeakers cabinet flow together with the mounting bracket providing a great ease for installing the loudspeaker in one good-looking entity. Specifications:RMS Power: 10 WattMax Power: 20 WattImpedance: 8 OhmSensitivity (1 W / 1 m): 83 dBMax SPL: 93 dBFrequency Response (±3 dB): 120 Hz - 20 kHzFrequency Range (-10 dB): 100 Hz - 20 kHzDimensions (W x H x D): 80 x 136 x 111.5 mmWeight: 0.39 KgColor: white

The WX302 is a powerful 2-way performance speaker suitable for a wide variety of applications, ensuring true-to-nature, high fidelity reproduction of music and speech. It is fitted with a 1” dome tweeter and a 3” low-frequency loudspeaker, capable of delivering a power of 30 Watt. It can be used in standard 8 Ohm systems but also in 70/100V PA systems with power taps for 20 Watt, 10 Watt and 5 Watt. The elegant shaped synthetic enclosure is available in two different colours (black and white), making it blend into any environment going from standard indoor home to special indoor design interiors. The included steel mounting bracket allows horizontal and vertical mounting as well as focusing of the speaker and an integrated advanced protection network protects the tweeter against overload.This new series retains all its strengths but has also been upgraded in a few specific areas with installer convenience and durability in mind. The connection of the indoor loudspeakers is changed to a terminal block, which makes it easier to install and connect the WX MK2 series wall speaker, while daisy-chaining is made more convenient through additional connection terminals (4-pin).. Both indoor and outdoor versions are now equipped with an elegant rotatable AUDAC logo.

The ATEO6 is the 6” version, with a 1” dome tweeter and a 6” Mid / Low frequency driver, ensuring a true-to-nature, high-fidelity reproduction of music and speech. It features a stunningly designed and elegant looking ABS housing which is fitted with high-quality components.What makes this loudspeaker range so exceptional is the especially designed mounting bracket using the Clevermount™ technology, making the loudspeakers cabinet flow together with the mounting bracket providing a great ease for installing the loudspeaker in one good-looking entity. The mounting and connection of the loudspeaker simply happens by attaching the included metal wall-plate to the desired location. When mounted, the wires must be connected to the desired terminal of the custom connection block. The desired power tap for 100 Volt or 8 Ohm can be selected by picking the right terminal. After this is done, only five seconds of work is left for clipping the loudspeaker onto the wall-plate, tightening the safety screw and you’re ready to rock! This way, it’s really child’s play to install a large number of loudspeakers in no-time. Even if you’re working all alone while people are watching your fingers or when installing the speakers up high, when you’re standing on a ladder. All ATEO series speakers are available in black (/B) or white (/W).Specifications:RMS power: 60 WMax Power: 120 WPower Taps / Impedance: 50 / 25 / 12.5 / 6.25 W 8 OhmSensitivity (1W / 1m): 89 dBSPL W/1m @ 8 Ohm: 106 dBSPL W/1m @ 100V: 105 dBFrequency response (±3dB): 65 Hz - 20 kHzFrequency range (-10dB): 55 Hz - 20 kHzDimensions (W x H x D): 194 x 350 x 220 mmWeight: 3.82 kgColor: black  

The CMX200-series is a 360° revolving pipe-neck condenser microphone, designed to be used for conferences, sound reinforcements, translations and studio applications. It has a high sensitive condenser element with a unidirectional cardioid polar pattern which ensures an excellent sound quality and reduces the feedback to a strict minimum, even when exposed to vigorous, hard sound.Thanks to its flat frequency characteristic, the CMX200 ensures a permanent high-fidelity sound, true to the user’s voice and intonation. The dark grey color and slimline design permit a discreet blending with every possible interior or background. The 35 cm version can be used for most general speech applications where the microphone is placed on tables or desks, while the 55 cm version is mainly used for placing on altars

The Baso cabinets are universally useable passive bass cabinets. Their bass reflex design is engineered to be as compact as possible while giving the maximum performance in terms of sound quality and pressure. Their enclosures are crafted out of sturdy high-quality plywood while their elegant design enables them to be placed in any environment.The Baso15 is loaded with a 15” high-performance woofer with an RMS power rating of 700 Watt and maximum power of 1400 Watt. The strength of this loudspeaker originates from a 4” voice coil which is allowed to extra long excursions. Displacements are precisely controlled by the dual low-loss suspension resulting in a superior linear behaviour.These carefully selected high-grade materials in collaboration with accurate acoustical craftmanship results in an impressive combination of punch and low frequency extension without compromises. The highly efficient design results in a sensitivity of 99 dB with a capability of continuous sound pressure production up to 127 dB. The frequency response ranges from 38 Hz up to 300 Hz while going down to 34 Hz at -10 dB.Besides these acoustical aspects, a lot of attention has been paid to all other aspects making it as versatile as possible. The enclosure is compact designed without any sacrifice to robustness due to the 18 mm high-quality plywood material finished with structured coating. The integrated carry handles and possibility to add an optional 35 mm pole adapter improve its mobility.Connections are made using two speakon compatible connectors located in a recessed connector dish, allowing link-through to other cabinets. This also allows close placement to any wall or corner.

The Baso cabinets are universally useable passive bass cabinets. Their bass reflex design is engineered to be as compact as possible while giving the maximum performance in terms of sound quality and pressure. Their enclosures are crafted out of sturdy high-quality plywood while their elegant design enables them to be placed in any environment.The Baso12 is loaded with a 12” high-performance woofer with an RMS power rating of 500 Watt and maximum power of 1000 Watt. The strength of this loudspeaker originates from a 4” voice coil which is allowed to extra long excursions. Displacements are precisly controlled by the dual low-loss suspension resulting in a superior linear behaviour.These carefully selected high-grade materials in collaboration with accurate acoustical craftmanship results in an impressive combination of punch and low frequency extension without compromises. The highly-efficient design results in a sensitivity of 98 dB with capability of continuous sound pressure production up to 125 dB. The frequency response ranges from 40 Hz up to 300 Hz while going down to 35 Hz at -10 dB.Besides these acoustical aspects, a lot of attention has been paid to all other aspects making it as versatile as possible. The enclosure is compact designed without any sacrifice to robustness due to the 18 mm high-quality plywood material finished with structured coating.Connections are made using two speakon compatible connectors located in a recessed connector dish, allowing link-through to other cabinets. This also allows close placement to any wall or corner.