. go to top icon

ATC SCS140iW Pro

SKU: APA2026-01407
  • free shipping icon
    Free Shipping
  • 36  Instalments
  • 2 years warranty
    2 Years Warranty
  • free shipping icon
    Free Shipping
  • 36  Instalments
  • 2 years warranty
    2 Years Warranty
11.000 €
Upon Order
Add to cart
apa support icon
NEED HELP?

Our expert advisors can help you.

Dual 12″ in-wall active studio subwoofer

The ATC SCS140iW Pro is a high-performance active subwoofer with twin 12″ drivers, for in-wall (soffit) installation in large control rooms. It pairs with in-wall SCM200AiW Pro for stereo, multichannel and immersive systems, and also complements smaller monitors where extended bass and high SPL are required.

Twin 12″ drivers for large control rooms

With twin 314 mm drivers and two 300 W amplifiers, the SCS140iW Pro reaches 116 dB continuous, 121 dB peak and extends to 22 Hz. It is designed for large control rooms and Dolby Atmos systems, where the low end needs energy without distortion.

ATC SCS140iW Pro
ATC SCS140iW Pro

Matches the main monitors

The cabinet width matches the SCM200AiW Pro, so subwoofer and main monitors can be installed together in the wall with a uniform look. The R1-300 amplifiers sit in a rack or on the wall, away from the cabinet, and cool without fans.

Hand-built in England

ATC hand-builds its drivers and amplifiers in Stroud, England, from voice-coil winding to the final test of every unit. That is why its subwoofers are covered by a 6-year warranty.

ATC SCS140iW Pro
Specifications

Features

  • Active subwoofer with twin 12″/314 mm drivers for in-wall installation
  • Hand-built ATC SS75-314SC drivers
  • Ideal partner for the SCM200AiW Pro, with matching cabinet width
  • Two external ATC R1-300 7U/19″ amplifiers per cabinet, for rack or wall mounting
  • Connection via NL4 and 5-pin XLR LED cables (sold separately)
  • Stereo balanced inputs and link outputs, level, low-pass and phase controls
  • Remote muting via footswitch
  • Hand-built in England, 6-year manufacturer warranty

Specifications

  • LF cut-off: 22 Hz
  • Max SPL: 116 dB continuous, 121 dB peak (1 m, half-space, 80 Hz low-pass)
  • Electronic data refer to each R1-300 amplifier (two per cabinet):
  • Low-pass filters: 50, 65, 80, 320 Hz (−6 dB, 4th-order Linkwitz-Riley)
  • Inputs: 2 x female XLR (pin 2 hot), approx. 20 kΩ impedance, CMRR 90 dB at 200 Hz
  • Link outputs: stereo balanced
  • Input sensitivity: 1.12 Vrms for full power
  • Controls: gain 0 / +6 / +10 dB, level 0 to −11 dB in 1 dB steps, phase 0 – 180°, polarity
  • Amplifier: grounded-source MOSFET class A/B, convection cooled, 300 W into 8 Ω
  • THD+N: < 0.003% (100 Hz, 300 W)
  • Protection: active FET momentary gain reduction, DC offset and over-temperature protection
  • Mute via footswitch (latching, 6.35 mm jack, sold separately)
  • Power consumption: 16 W idle, 500 W full power
  • Dimensions (H x W x D): 784 x 925 x 460 mm
  • Weight: 69.7 kg
Write your Review

How would you rate this product?