MENU
We will notify you as soon as the product is in stock in our warehouse! The orders will be placed in priority order and we do not guarantee that the price will remain the same.
Musical Fidelity M8xTT
SKU: APA2026-01463
-
Free Shipping -
6
Interest FreeInstalments
-
2 Years Warranty
-
Free Shipping
-
6
Interest FreeInstalments
-
2 Years Warranty
9.300 €
Available for shipping within 2-3 days
Collect from our store within 2-3 days
Add to cart
1.550,00 € / month
The denoted price refers to ordering with instalment and paying via credit card (Visa, Mastercard). VAT is factored in in instalment prices.
List
Related products
Musical Fidelity M6xTT
The Musical Fidelity M6xTT is a high-end belt-drive turntable with a 9" tonearm that brings the design principles of the flagship M8xTT to a more accessible price. Hand-made in Europe, it combines clear acrylic and aluminium in a striking construction. Supplied with tonearm, without cartridge.Design philosophyIt is based on the legendary M1 by Antony Michaelson and Heinz Lichtenegger: inert metal mass combined with non-resonant acrylic plates. The motor is mechanically isolated from the tonearm and platter thanks to the dual chassis.9" tonearmThe tonearm follows the M8xTT design, with a shorter tube and 5P DIN output. It features an acrylic bearing ring and tapered aluminium tube, full VTA and azimuth adjustment, and two TPE-damped counterweights.Motor and platterThe motor sits in special foam in the lower acrylic plinth. Speed change between 33 and 45 rpm is electronic and, as frequency and voltage are generated electronically, speed is independent of mains quality. The 6.6 kg aluminium platter is TPE-damped and runs on an inverted bearing with ceramic ball.Feet and accessoriesFour heavy aluminium feet with magnetic isolation and height adjustment. Supplied with an aluminium record puck, leather mat and phono cable with gold-plated plugs. Dust cover available separately.
5.680 €
Rega Naia
The Naiad in production formThe Naia is Rega's flagship turntable and the production version of the Naiad, the laboratory turntable on which the company tested its most advanced ideas. Rega describes it as a design without compromise, aimed at a new level of vinyl playback. It combines a graphene-impregnated carbon fibre plinth, ceramic braces, a ceramic platter, a ZTA bearing and the RB Titanium tonearm. It comes with the Naia reference power supply, without a cartridge, and is hand-built in England.Reference power supply and triple beltThe reference power supply uses a DSP generator with a high-stability crystal and drives the 24 V low-noise motor with a near-sinusoidal waveform. It offers electronic 33⅓/45 rpm switching and fine speed adjustment, while vibration and speed are tuned at the factory. Drive is transferred through three Reference EBLT belts, and the turntable stands on aluminium feet.Cartridge and systemRega recommends the Aphelion 2 moving coil cartridge, the Aura MC phono stage and amplifiers such as the Aethos and Osiris. The Naia was named Best High-End Turntable 2024/25 by AV Forums and received an Editor's Choice from The Ear.
13.499 €
Technics SL-12100GME Master Edition Black
Technics SL-1200GME Master Edition BlackThe Technics SL-1200GME turntable is a manual, direct-drive model. It is available in two finishes: silver for the SL-1200GME and black for the SL-1210GME. This limited and numbered edition crowns the legendary Technics SL-1200 series. This Master Edition builds upon the renowned foundations of the SL-1200G turntable, enhancing its performance through 10 years of innovation. The Technics SL-1200GME therefore incorporates cutting-edge technologies such as ΔΣ-Drive signal modulation, a triple-layer platter, an exclusive chassis, and insulating feet incorporating αGEL.A limited and numbered collector's editionThe Technics SL-1200GME turntable represents the pinnacle of the brand's expertise, a specialist in direct-drive models. This Master Edition is limited to just 1200 units in its silver version and 1210 in its black finish. Each turntable features a patch that authenticates its uniqueness. A true showcase of its expertise, Technics has succeeded in combining all of its major innovations to present an exceptional audiophile turntable.Triple layer trayThe Technics SL-1200GME / SL-1210GME turntable features a triple-layer platter. This platter is made of die-cast aluminum topped with a brass plate. This assembly combines rigidity and lightness to optimize platter rotation. All of this is supported by a layer of rubber positioned beneath the platter. This layer dampens resonances and vibrations from the motor, resulting in improved inertia and optimal rotational stability.Magnesium tonearmThe Technics SL-1200GME turntable features an ultra-lightweight, cold-drawn magnesium tonearm. This material provides excellent damping for the tonearm. At 230 mm long, the S-shaped tonearm ensures optimal alignment with the vinyl record groove. It utilizes a gimbal suspension system, similar to those found on other Technics turntables, and ultra-precise bearings to guarantee unprecedented sensitivity to even the slightest groove variations.
5.490 €
Thorens TD 124 DD Exclusive Walnut
The TD 124 DD Exclusive is a special edition of Thorens’s iconic turntable. This walnut-finished version blends the Swiss brand’s traditional design with high-end components, including a 12-inch tonearm and extensive compatibility with EMT Tondose professional cartridges.A 12-inch tonearmThe most distinctive feature of this Exclusive version lies in its specially designed TP 124 tonearm configured at 12 inches (309 mm effective length). This extended geometry, usually reserved for professional broadcast equipment, fundamentally alters the groove-tracking parameters. The tracking error angle is significantly reduced compared with conventional 9-inch arms, thereby minimizing harmonic distortion across the entire surface of the record.The pure silver internal wiring sets this special version apart from the standard model. This noble conductor ensures absolutely pure signal transmission from the cartridge to the outputs, preserving the most subtle micro-details of the recording. The anti-skating system incorporates ruby bearings, a refined technical solution that provides consistently precise counterforce with no parasitic friction. The 23.6° offset angle and 17.8 mm overhang have been calculated to optimize groove tracking with this specific arm length.The 20-gram effective mass is particularly well suited to low-compliance moving-coil cartridges, notably Ortofon SPU models and the renowned EMT Tondose. The SME-type connector maintains universal compatibility while ensuring a rigid mechanical coupling between the cartridge and the arm.
12.500 €
SME Model 8 Black | 309 Tonearm
The Model 8 is more than just a turntable; it’s a masterpiece of engineering. Featuring an impressive 40% increase in mass from the Model 6 series, this turntable offers extreme stability and resonance control in its category. Every enhancement in the Model 8 demonstrates SME’s unwavering commitment to performance and design.
9.990 €
Pro-Ject Audio Xtension 10 Evolution Black Piano
The Pro-Ject Xtension 10 Evolution is a mass-loaded high-end turntable. Its 10 kg TPE-damped aluminium platter runs on an inverted bearing with ceramic ball, while three powerful magnetic feet decouple it from the surface so it practically floats.With wow & flutter of just ±0.01% and 73 dB signal-to-noise, it delivers absolutely stable, silent playback. A record puck and Connect it 5P cable are included.10 kg platterThe precision aluminium platter has a TPE damping ring inside and a vinyl top layer, the ideal surface for your records.Magnetic feetThree powerful magnetic feet effectively decouple the turntable from its surface, keeping vibrations away from the stylus.10" tonearmThe 10" tonearm with 254 mm effective length accepts 4–14 g cartridges, with four counterweights included. Speeds of 33, 45 and 78 rpm change electronically.
4.299 €
Pro-Ject Audio Signature 10 Real Wood Walnut
The Pro-Ject Signature 10 is an uncompromising high-end turntable combining mass-loading with magnetic floating principles. It has a 10.4 kg TPE-damped aluminium platter, an inverted, magnetically decoupled ceramic bearing and a 10" S-shape tonearm.The motor is driven by a precision generator, and 33 and 45 rpm change electronically. It comes in high gloss and real wood finishes.10" S-shape tonearmThe 10" single-pivot aluminium tonearm has a non-magnetic, low-resonance build, minimal bearing friction and an SME headshell. Several counterweights are included for 4–10 g cartridges.10.4 kg platterThe aluminium platter is TPE damped with a vinyl top layer. It sits on an inverted, magnetically decoupled ceramic bearing, while the 405 g puck holds the record firmly.Precision generatorThe motor is powered by a precision generator for absolutely stable speed. A Connect it 5P phono cable is included.
6.199 €
The Musical Fidelity M8xTT is Musical Fidelity's flagship turntable, with belt drive, a heavy 10 kg aluminium platter and a new 10" tonearm with RCA and XLR outputs. Hand-made in Europe, it evolves the ideas of the legendary M1. Supplied with tonearm, without cartridge.
Design philosophy
It combines inert metal alloys with non-resonant acrylic, while the dual chassis isolates the motor from the platter and tonearm.
10" tonearm
A new low-resonance 10" tonearm with acrylic bearing ring and tapered aluminium tube. It offers full VTA and azimuth adjustment and comes with two counterweights for cartridges from 6 to 20 g. It has RCA and balanced XLR outputs.
Motor and platter
The motor sits on isolating foam in the lower acrylic plinth, with electronic 33/45 rpm selection. The 10 kg aluminium sandwich platter, with inserts and TPE damping on both layers, gives an excellent flywheel effect and runs on an inverted bearing with ceramic ball.
Feet and accessories
Four heavy aluminium feet with magnetic isolation and height adjustment. Supplied with a heavy record puck, leather mat and phono cable with gold-plated plugs.
Specifications
- Drive: belt drive with electronic speed control
- Speeds: 33 and 45 rpm (electronic switching)
- Platter: 10 kg aluminium sandwich with TPE damping, inverted bearing with ceramic ball
- Tonearm: Musical Fidelity 10", RCA and XLR outputs, for 6–20 g cartridges
- Effective tonearm mass / length: 17 g / 254 mm
- Overhang: 16 mm
- Wow & flutter: ±0.05% (33), ±0.04% (45)
- Speed drift: ±0.11% (33), ±0.10% (45)
- Signal-to-noise ratio: -78 dB
- Dimensions (WxHxD): 533 x 245 x 413 mm
- Weight: 31.5 kg
In the box
- Turntable with 10" tonearm (no cartridge)
- Record puck
- Leather mat
- Phono cable
Write your Review
How would you rate this product?
Follow us on Social Media
Don't miss out on new products and events by Athens Pro Audio.
Stock Notice
Musical Fidelity M8xTT
