Chandler Limited Little Devil Preamp 500 Series Module

Chandler Limited TG2-500 Series Microphone Preamp

The TG2-500 recreates the rare EMI TG12428 preamp from the EMI and Abbey Road recording and mastering consoles of the late ’60s and early ’70s, the sound heard on albums such as The Beatles’ “Abbey Road” and Pink Floyd’s “The Dark Side of the Moon”. For the first time, the legendary TG2 sound is available in 500 Series format.Chandler Limited took the mic preamp and line amplifier of the TG2 Pre Amp/DI, with the same discrete amplifiers and transformers of the TG series, and fitted them into a 500 Series module without changing the sound: creamy and smooth, with warmth, punch and a surprisingly open top end.

1.194 €

Chandler Limited Germ 500 MKII 500 Series Microphone Preamp

The Germ 500 MKII is Chandler Limited’s well-known Germanium preamp adapted for 500 Series racks. It uses classic germanium transistors in class A, transformer-balanced circuits, with the same transformers and amplifier blocks as the rack version, so the sound is the same: thick and creamy.The MKII updates the original Germ 500 with an improved faceplate layout and a new look. The power section was also upgraded, so the module starts up without issues in current lunchboxes and racks. Chandler has tested it in racks from API, BAE, A-Designs, Purple and Empirical Labs.

1.124 ,22 €

Heritage Audio 1073

The Heritage Audio 1073 has been engineered to fill input module slots in the restoration process of vintage 80 Series sound mixing consoles. In case outboard fitting is preferred, the HA1073 can be installed into the Heritage Audio Frame 8 and Rack 2 powered enclosures. Special care has been taken in sourcing the correct components that ensure performance will be as close to a 1070s unit as it is possible nowadays. Custom polystyrene and polypropylene film tone capacitors have been developed to closely match the Siemens Styroflex and Mullard Mustard types of the late 60s and early 70s. Custom input transformers have also been co designed with Carnhill Transformers´ Oxford factory to our special requirements, which ensure correct harmonic distortion content and saturation points. The Heritage Audio 1073 is entirely handmade in our facilities in Spain, employing the same old-fashioned wiring and soldering techniques of the 70s. Manufacturing a single module takes several days of one of our master builders. All its circuitry is held into four plug-in cards. Specifications: Microphone input impedance: HI, 1200 Ohm minimum, LO, 300 Ohm minimum. Higher gain positions gradually have greater impedances, optimum for low gain ribbon mics. Input is transformer balanced and floating. Line input impedance: 10KOhms bridging, transformer balanced and floating. Output impedance: Less than 75 Ohms, transformer balanced and floating, to drive a load of 600 Ohms. Maximum output: Greater than +26dBu into 600 Ohms, THD: Less than 0.025% at 1Khz, Less than 0.05% at 100Hz. Frequency response :20Hz (+0.3dB) to 20Khz (-0.2dB). Maximum Gain: Slightly greater than 80dB. Noise: Less than -100dBu. Power consumption: Less than 110 mA @24VDC.

2.223 €

Heritage Audio 6673

The  6673 module is a Heritage Audio´s new design which has been engineered to fill input module slots in the restoration process of vintage 80 Series sound mixing consoles. It is also compatible with the Heritage Audio Frame 8 and Rack 2 powered enclosures. The 6673 is a 4 band equalizer in a 1073 sized module, combining the mid band of the vintage 1066 module and an expanded 1073 mid band. This fact allows a more complex equalizing whilst at the same time maintaining the same sonic qualities. Vintage connoisseurs already know how sweet the 1066 mid band sounds and how well it complements the 1073´s one. Additionally the 6673 features three frequency´s options for the high shelf, as opposed to the fixed ones on both the 1073 and 1066, covering both. Special care has been taken in sourcing the correct components that ensure performance will be as close to a 1070s unit as it is possible nowadays. Custom polystyrene and film tone capacitors have been developed to closely match the Siemens Styroflex and Mullard Mustard types of the late 60s and early 70s. Custom input transformers have also been co designed with Carnhill Transformers´ Oxford factory to our special requirements. The Heritage Audio 6673 is entirely handmade in our facilities in Spain, employing the same old-fashioned wiring and soldering techniques of the 70s. All its circuitry is held into five plug in cards. Specifications: Microphone input impedance: HI, 1200 Ohm minimum, LO, 300 Ohm minimum. Higher gain positions gradually have greater impedances, optimum for lo gain ribbon mics. Input is transformer balanced and floating. Line input impedance: 10KOhms bridging, transformer balanced and floating. Output impedance: Less than 75 Ohms, transformer balanced and floating, to drive a load of 600 Ohms. Maximum output: Greater than +26dBu into 600 Ohms, THD: Less than 0.025% at 1Khz, Less than 0.05% at 100Hz. Frequency response :20Hz (+0.3dB) to 20Khz (-0.2dB). Maximum Gain: Slightly greater than 80dB. Noise: Less than -100dBu. Power consumption: Less than 110 mA @24VDC.

2.645 €

Heritage Audio 8173

The 8173 module is a Heritage Audio´s new design, which has been engineered to fill input module slots in the restoration process of vintage 80 Series sound mixing consoles. It is also compatible with the Heritage Audio Frame 8 and Rack 2 powered enclosures. The 8173 could be easily described as a 1073 with the mid bands of a 1081. We´ve decided to keep the 1073 Baxandall shelving lo and hi eq bands as they sound amazing, but have implemented a choice of 3 hi shelving frequencies, a la 1084. Special care has been taken in sourcing the correct components that ensure performance will be as close to a 1070s unit as it is possible nowadays. Custom polystyrene and film tone capacitors have been developed to closely match the Siemens Styroflex and Mullard Mustard types of the late 60s and early 70s. Custom input transformers have also been co designed with Carnhill Transformers´ Oxford factory to our special requirements. The Heritage Audio 8173 is entirely handmade in our facilities in Spain, employing the same old-fashioned wiring and soldering techniques of the 70s. All its circuitry is held into five plug in cards. Specifications: Microphone input impedance: HI, 1200 Ohm minimum, LO, 300 Ohm minimum. Higher gain positions gradually have greater impedances, optimum for lo gain ribbon mics. Input is transformer balanced and floating. Line input impedance: 10KOhms bridging, transformer balanced and floating. Output impedance: Less than 75 Ohms, transformer balanced and floating, to drive a load of 600 Ohms. Maximum output: Greater than +26dBu into 600 Ohms, THD: Less than 0.025% at 1Khz, Less than 0.05% at 100Hz. Frequency response :20Hz (+0.3dB) to 20Khz (-0.2dB). Maximum Gain: Slightly greater than 80dB. Noise: Less than -100dBu. Power consumption: Less than 110 mA @24VDC.

2.645 €

API Audio 512C

The API 512C is a mic/line/instrument preamp designed to provide a low noise, unusually good sounding front end for all types of audio systems. Sonically, it is at the top of the "Mic Preamp List", regardless of price. Offering low noise (-129 EIN) and 65 dB of gain, the 512C includes phantom power, switchable polarity, -20 dB pad and Mic/Line or Instrument selector.  Front panel XLR and 1/4 inch connectors combined with rear panel mic access allows for additional flexibility when installed in an API LunchBox, Six Pack, 10 position vertical rack, a 2 position horizontal rack, or an API console. What makes the API 512C unique is its long evolution from the original 1967 era 512, the first modular mic pre, to the current full featured 512C, while preserving the original sound character that made it so much a part of the early days of recording. Offering high headroom and a wide variety of inputs and input access ponts, it is ideal for unusual and demanding applications.        FEATURESMic Preamp with 65 dB of gainFront and Back Panel Mic Input AccessLine/Instrument Preamp with 50 dB of gainFront and Back Panel Line/Instrument InputLED VU meter for monitoring output level20 dB pad switch, applies to mic/line/instrument48v Phantom switchable powerTraditional API fully discrete circuit designUses the famous API 2520 Op-Amp

999 €

API Audio 512v

The API 512v is a mic / line / instrument preamp, world famous for its ability to provide a low noise (-129 EIN) and unusually good sounding front end for all types of audio applications. Sonically, it delivers the instantly recognizable API sound at an affordable price, and in the scalable API 500 Series format. Offering an impressive 65 dB of gain, the 512v includes front panel Variable Output control, switchable 3:1 output transformer selection, phantom power, switchable polarity, -20 dB pad, and Mic or Instrument/Line selector. The front panel Combo-style XLR and 1/4 inch connector combined with rear panel mic access allows for additional flexibility when installed into an API lunchbox®, API's 10 position 500V vertical rack, or into an API console.The API 512v remains faithful to the circuit designs of API's founder Saul Walker. Artfully combining those circuits with API's proprietary transformers and the incomparable 2520 op-amp, the 512v is a highly musical and rich-sounding analog mic pre, equally at home in commercial recording spaces as it is in smaller home studios. Fully featured and still hand assembled, the 512v exhibits the reliability, long life, and uniformity which are characteristic of all API products. SpecificationsMic Preamp with 65 dB of gainVariable Output Level Control3:1 Output Transformer Tap SelectionFront and Back Panel Mic Input AccessLine/Instrument Preamp with 45 dB of gainFront Panel Combo-style XLR + 1/4 inch Line/Instrument InputLED VU meter for Gain Level indication20 dB pad switch, applies to mic/line/instrument48v Phantom switchable powerTraditional API fully discrete circuit design with 2520 Op AmpFeatures API's unique Five Year Warranty

1.168 €

SSL 500-Series VHD+ Preamp

Ultra-clean to heavy distortion...You decideThe VHD+ Pre Module for the popular 500 format modular rack platform makes the uniquely versatile VHD based preamp technology from Duality, SSL's industry leading large format studio console, available for studios of all sizes. The VHD+ Pre module is an immensely versatile recording and processing device. It can deliver ultra clean SSL SuperAnalogueTM grade recordings but also features a switchable VHD mode. SSL's patented Variable Harmonic Drive (VHD) system uses a 100% analogue signal path to generate rich harmonic distortion.Increase VHD input gain and the Variable Harmonic Drive process introduces either 2nd or 3rd harmonic distortion or a blend of the two to your source material. At lower gain settings it adds gentle valve-style warmth or a touch of transistor edge. As the gain is increased the more extreme the distortion becomes, until at high gain settings it delivers fierce trashy transistoresque grunge.The VHD+ Pre module gives the user ultimate versatility from a studio grade preamp. Whether it's ultra-clean traditional SSL, subtle warming or totally trashy transistor distortion, VHD will change your expectations of what a preamplifier should deliver.Key featuresSSL SuperAnalogueTM grade preamp2nd order harmonics (valve warmth to extreme distortion)3rd order harmonics (transistor edge to totally trashed)Absolute control via 2nd and 3rd order harmonic blendVariable Harmonic Drive (VHD) in/out switchSwitch-able LF Filter+48V phantom powerPhase invert switchPAD switchHi-Z switch

666 €