Pro-Ject

1Xpression III Comfort is now the 5th generation of the hi-fi classic Pro-Ject 1 which was presented for the first time 18 years ago. No other entry-level turntable is more audiophile and the current version includes an improved main bearing, acrylic platter, carbon tonearm with aluminum head-shell and effective decoupling of the drive motor. The 1Xpression III is now available in a comfort version including electronic speed change and limit stop.   Specification:Fitted cartridge Ortofon 2M RedBelt drive design with low noise AC motor Type Select 2  Plinth out of MDF with high gloss anthracite surface  Acrylic 0,9 kg platter  Platter bearing Type Block 2: Low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass bearing housing  Motor decoupled to reduce vibration  Integrated Speed Box allows electronically switchable speed between 33 and 45 Upm  Automatic cutoff at the end of the record  Height adjustable rubber-damped aluminum cones  Gold-plated RCA phono sockets  8.6 Carbon fiber arm with aluminum headshell  Conical arm tube avoids standing wave reflections  Inverted tonearm bearing comprises inverted hardened stainless-steel and sapphire thrust-pads  Solid arm base permits accurate height adjustment of armtube and VTA (vertical tracing angle)  Single-screw fixing of armtubarm tubes rotation for easy adjustment of needle azimuth despite fixed headshell  Highly flexible top-grade copper internal wiring  Resonance optimized counterweight construction  

This turntable makes use of traditional frame design which was established by the famous turntable manufacturers of the 50's and 60's. It uses a compact simple and elegant form factor. The Classic incorporates a combination of approved belt drive design using a low noise AC motor with an ultra-precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability. Advanced technology is used for decoupling and the completely new designed tone-arm Specifications:Belt drive with manual speed control 33/45 rpmHeight adjustable decoupling feetPrecision balanced TPE*-damped aluminium-platter / felt matMetal/MDF sandwich chassis floating on TPE* suspension9” carbon/aluminium tonearm with MM & MC capabilityJapanese ball bearing (base of tonearm)Integrated central vertical cable outlet for unhindered arm movementUltra low friction Zircon pin-point cardan bearings (top & side)Azimuth and VTA fully adjustableTPE damped counterweightOptionally available with 2M Silver phono cartridgeClassic wooden chassis in 3 matt finishes (walnut, rose nut, eucalyptus)Dustcover included

This turntable makes use of traditional frame design which was established by the famous turntable manufacturers of the 50's and 60's. It uses a compact simple and elegant form factor. The Classic incorporates a combination of approved belt drive design using a low noise AC motor with an ultra-precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability. Advanced technology is used for decoupling and the completely new designed tone-arm Specifications:Belt drive with manual speed control 33/45 rpmHeight adjustable decoupling feetPrecision balanced TPE*-damped aluminium-platter / felt matMetal/MDF sandwich chassis floating on TPE* suspension9” carbon/aluminium tonearm with MM & MC capabilityJapanese ball bearing (base of tonearm)Integrated central vertical cable outlet for unhindered arm movementUltra low friction Zircon pin-point cardan bearings (top & side)Azimuth and VTA fully adjustableTPE damped counterweightAvailable with 2M Silver phono cartridgeClassic woodn chassis in 3 matt finishes (walnut, rose nut, eucalyptus)Dustcover included

This turntable makes use of traditional frame design which was established by the famous turntable manufacturers of the 50's and 60's. It uses a compact simple and elegant form factor. The Classic incorporates a combination of approved belt drive design using a low noise AC motor with an ultra-precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability. Advanced technology is used for decoupling and the completely new designed tone-arm Specifications:Belt drive with manual speed control 33/45 rpmHeight adjustable decoupling feetPrecision balanced TPE*-damped aluminium-platter / felt matMetal/MDF sandwich chassis floating on TPE* suspension9” carbon/aluminium tonearm with MM & MC capabilityJapanese ball bearing (base of tonearm)Integrated central vertical cable outlet for unhindered arm movementUltra low friction Zircon pin-point cardan bearings (top & side)Azimuth and VTA fully adjustableTPE damped counterweightAvailable with 2M Silver phono cartridgeClassic woodn chassis in 3 matt finishes (walnut, rose nut, eucalyptus)Dustcover included

This turntable makes use of traditional frame design which was established by the famous turntable manufacturers of the 50's and 60's. It uses a compact simple and elegant form factor. The Classic incorporates a combination of approved belt drive design using a low noise AC motor with an ultra-precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability. Advanced technology is used for decoupling and the completely new designed tone-arm Specifications:Belt drive with manual speed control 33/45 rpmHeight adjustable decoupling feetPrecision balanced TPE*-damped aluminium-platter / felt matMetal/MDF sandwich chassis floating on TPE* suspension9” carbon/aluminium tonearm with MM & MC capabilityJapanese ball bearing (base of tonearm)Integrated central vertical cable outlet for unhindered arm movementUltra low friction Zircon pin-point cardan bearings (top & side)Azimuth and VTA fully adjustableTPE damped counterweightAvailable with 2M Silver phono cartridgeClassic woodn chassis in 3 matt finishes (walnut, rose nut, eucalyptus)Dustcover included

This special collaboration between Pro-Ject Audio Systems and the Universal Music Group features one of the most influencing artists of modern history, former Beatles member George Harrison! The turntable used is Essential III, the evolution of a milestone. It features high quality and audiophile components, such as an Ortofon OM10 cartridge, a precision diamond cut aluminum pulley, top notch MDF chassis, an acrylic platter or a completely redesigned motor control. Its sound is both lively and relaxing, musical and detailed just like the music from George Harrison, therefore they are perfect partners in crime.  The artwork on the turntable was created by Studio Number One. The original design was created by Shepard Fairey, one of the most respected street artists around, for the Harrison family. It features a distinctive portrait of George Harrison and forms together with the Indian patterns and the analog mixing console (below the acrylic platter) with a unique look.  This one of a kind masterpiece is limited to 2500 pieces worldwide.  Features:Special edition of Essential III  Limited to 2500 pieces worldwide!  Acrylic platter  Artwork by respected street artist Shepard Fairey!  Belt drive with synchronous motor and silicone belt  Diamond cut aluminum drive pulley  Chassis made of resonance in-sensitive MDF  Integrated DC-powered motor control minimizes motor vibration and guarantees speed stability  Low tolerance platter bearing with stainless steel spindle  8,6” aluminum tonearm with sapphire bearings  Ortofon OM10 cartridge pre-mounted  High-quality semi-balanced Connect it E phono interconnect With gold-plated RCA connectors included  Special decoupling feet  Dust cover included   Specifications:Speed: 33, 45 (manual speed change)Principle: belt driveSpeed variance: 33: 0,70% 45: 0,60%Wow & flutter: 33: 0,21% 45: 0,19%Platter: 300mm acrylic with felt mat (0,8kg)Main bearing: stainless steelEffective arm length: 218,5 mmOverhang: 22,0mmEffective tonearm mass: 8,0grCounterweight for mass: 3 - 5,5g (included)Tracking force range: 0 - 25mn (OM5 18mn recommended)Included accessory: power supply, dust coverPower consumption: 4,5 watts maxDimensions: 420 x 112 x 330mm (WxHxD)Weight: 5,0 kg net 

Essential III offers a variety of enhancements compared to its successful predecessors, such as a diamond-cut aluminum drive pulley, a resonance-optimized MDF main platter, and MDF chassis. The refined, high-precision platter bearing has significantly lower tolerances than Essential II. Essential III is the audiophile entry turntable! The setup is very simple, the included Phono RCA cable, Connect it E, sounds far above its price range. Equipped with the high-quality pickup OM10 by the phonographic cartridge pioneer Ortofon, Essential III delivers lively, balanced and highly involving sound that will delight every vinyl lover.   Essential III comes in the aesthetic high gloss colors black, red and white.   Specifications:Belt drive with synchronous motor and silicone belt  Diamond cut aluminium drive pulley  Chassis & platter made of resonance in-sensitive MDF  Integrated DC-powered motor control minimizes motor vibration and guarantees speed stability  Low tolerance platter bearing with strainless steel spindle  8,6” aluminum with sapphire bearings  Ortofon OM10 cartridge pre-mounted  High-quality semi-balanced Connect it E phono interconnect with gold-plated RCA connectors included  Special decoupling feet  Dust cover included  High-gloss colour options: black, red, white  Counterweight for mass : 3 - 5,5g (included)Tracking force range: 0 - 25mn (OM5 18mn recommended)Included accessory: power supply, dust coverPower consumption: 4,5 watts maxDimensions: 420 x 112 x 330mm (WxHxD)Weight: 5,0 kg net

Essential III offers a variety of enhancements compared to its successful predecessors, such as a diamond-cut aluminum drive pulley, a resonance-optimized MDF main platter, and MDF chassis. The refined, high-precision platter bearing has significantly lower tolerances than Essential II. Essential III is the audiophile entry turntable! The setup is very simple, the included Phono RCA cable, Connect it E, sounds far above its price range. Equipped with the high-quality pickup OM10 by the phonographic cartridge pioneer Ortofon, Essential III delivers lively, balanced and highly involving sound that will delight every vinyl lover.   Essential III comes in the aesthetic high gloss colors black, red and white.   Specifications:Phono and Ortofon OM10eBelt drive with synchronous motor and silicone belt  Diamond cut aluminum drive pulley  Chassis & platter made of resonance in-sensitive MDF  Integrated DC-powered motor control minimizes motor vibration and guarantees speed stability  Low tolerance platter bearing with stainless steel spindle  8,6” aluminum with sapphire bearings  Ortofon OM10 cartridge pre-mounted  High-quality semi-balanced Connect it E phono interconnect with gold-plated RCA connectors included  Special decoupling feet  Dust cover included  High-gloss colour options: black, red, white  Counterweight for mass : 3 - 5,5g (included)Tracking force range: 0 - 25mn (OM5 18mn recommended)Included accessory: power supply, dust coverPower consumption: 4,5 watts maxDimensions: 420 x 112 x 330mm (WxHxD)Weight: 5,0 kg net

The transparent acrylic plinth stands on three individually height-adjustable TPE-damped aluminium cones and carries the motor and the sub-chassis. The sub-chassis, made of Corian, rests on three magnetic fields. A magnetic subchassis suspension system avoids parasitic noise normally caused by con-ventional spring mechanism.A supplied spirit level allows easy adjustment of the sub-chassis. A quiet running AC motor unit drives the platter's outside edge via a belt. It does incorporate an advanced DC-driven motor control, that ensures perfect speed stability and electronic speed change.  The resonance-optimised platter is a sandwich construction utilising a fine-balanced medium density fibre platter and a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp. It runs on an inverted bearing with stainless-steel axle carrying a ceramic ball/plate bearing. The headshell and armtube of high-end tonearm 9cc Evolution are fashioned from a single piece of carbon-fibre. A conical armtube avoids standing wave reflections.Features:Acrylic Plinth  Sub-chassis made from Corian with magnetic suspension  Acoustically inert sandwich construction of platter with combination of MDF and vinyl layer as mat  Inverted main bearing with ceramic ball/plate  Belt drive with AC motor with DC driven AC generator  Electronic speed control with 33/45 rpm switching  Pre-mounted 9" tonearm 9 cc Evolution  Tonearm bearings with ABEC 7 ballraces  5P Connect it Phono CC cable with RCA plugs  

This turntable makes use of traditional frame design which was established by the famous turntable manufacturers of the 50's and 60's. It uses a compact simple and elegant form factor. The Classic incorporates a combination of approved belt drive design using a low noise AC motor with an ultra-precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability. Advanced technology is used for decoupling and the completely new designed tone-arm Specifications:Belt drive with manual speed control 33/45 rpmHeight adjustable decoupling feetPrecision balanced TPE*-damped aluminium-platter / felt matMetal/MDF sandwich chassis floating on TPE* suspension9” carbon/aluminium tonearm with MM & MC capabilityJapanese ball bearing (base of tonearm)Integrated central vertical cable outlet for unhindered arm movementUltra low friction Zircon pin-point cardan bearings (top & side)Azimuth and VTA fully adjustableTPE damped counterweightOptionally available with 2M Silver phono cartridgeClassic wooden chassis in 3 matt finishes (walnut, rose nut, eucalyptus)Dustcover included

Stream Box DS net is Pro-Ject Audio‘s fully equipped audio streaming client & internet radio, that is able to play music stored in network servers (computers, NAS drives, etc) connected to your home network. Stream Box DS net includes powerful audiophile features. Ready for use with streaming service Spotify and LOSSLESS audio music platform TIDAL. Other streaming services like Deezer, Grooveshark etc, can be implemented using 3rd party applications.  Superb audio playback including 24bit HD music is self-evident, like outstanding technical data for distortion and noi-se levels. Navigation can be done via IR remote (which is included) and/or free Android / iOS App.  Features:24 bit/192kHz Hires Audio streaming client  Spotify Connect support (firmware 4.0.61.83 or higher)  LOSSLESS-Streaming with TIDAL  Top-grade Highend Cirrus Logic CS4344 DAC  WAV, AIFF, FLAC, WMA9 lossless, ALAC & AAC  FLAC decoding for all 9 compression levels including Level 0  (data rate up to approximately 9 mbit/s)  Gapless playback of all audio formats  Fixed analogue & digital coax outputs (RCA)  Search functionality fast forward and back  Alphanumeric search  3,5“ colour display shows cover art and metadata  Multiple display languages  Wifi 802.11 b/g allowing real 24/192 with Wifi  Solid metal casework prevents from interference  Special proprietary NetAPI implemented for fast access  Free Control APP (iOS & Android)  Specifications:Internetradio: vTuner includedGapless: all audio formats (using IR control)Input: Network & USB 2.0Output: RCA (analogue, fixed volume level) Coax S/PDIF (digital)Network: Wi-Fi IEEE 802.11 b/g & Ethernet RJ45Faceplate: black or silverDimensions: 72 x 206 x 194 mm (HxWxD) without antennaWeight: 2,60 kg  

Stream Box RS is Pro-Ject Audio‘s reference-class audio streamer, that goes far beyond the AWARD WINNING audiophile grade highend audio streaming client Stream Box DSnet, Ready for use with streaming service Spotify and LOSSLESS audio music platform TIDAL. Other streaming services like Deezer, Grooveshark etc, can be implemented using 3rd party applications.Additional to the streaming functionality. Stream Box RS also acts as D/A converter for other digital sources, that use USB, coax and optical connection and as highend pre-amplifier with 1 additional analogue sound source! The audio circuitry is using E88CC tubes for ultimate fidelity and components, that guarantee extremely low noise and distortion levels. Volume control is done by a motor-driven ultra highend ALPS potentiometer via IR remote and/or the new and advanced Android or iOS Apps.  Features:24 bit/192kHz Hires Audio streaming client  Spotify Connect support (firmware 4.0.61.83 or higher)  LOSSLESS-Streaming with TIDAL  XLR & RCA output  Volume control via analogue alps potentiometer  Fully balanced double mono triode tube output stage  Top of the notch Highend PCM 1792A DAC  WAV, AIFF, FLAC, WMA9 lossless, ALAC & AAC  FLAC decoding for all 9 compression levels including Level 0  (data rate up to approximately 9 mbit/s)  1x digital coax & 1x digital poptic inputs  Gapless playback of all audio formats  Fixed analogue & digital coax outputs (RCA)  Search functionality fast forward back & alphanumeric  3,5“ colour display shows cover art and metadata  Multiple display languages  Wifi 802.11 b/g allowing real 24/192 over Wifi  Superlative rigid luxury alu cabinet  Specifications:Audio: MP3, FLAC (up to 24bit/192kHz including 24/176), WMA9-lossless, AIFF, AAC, ALAC, LPCM (WAV, up to 24bit/192kHz), Ogg Vorbis 1.0Internetradio: vTuner includedGapless: all audio formats (using IR control)Inputs: Network, 1x digital coax, 1x digitaloptic, 2x USB 2.0 (24/96, Type A), supports,  Flash- & Harddisc drives (FAT16&FAT32)Output: XLR, RCA (analogue) Coax S/PDIF (digital)Network: Wi-Fi IEEE 802.11 b/g/n & Ethernet (10/100 BaseT)Faceplate: black or silverDimensions: 72 x 206 x 200 (240) mm (HxWxD) without antennaWeight: 3.25 kg

Stream Box DSA is Pro-Ject Audio‘s fully equipped integrated amplifier; streaming client & internet radio, that is able to play music stored in network servers (computers, NAS drives, etc) connected to your home network. Additional to streaming and pre-/power amplification functionality Stream Box DSA also acts as D/A converter for other digital sources (USB, coax, Toslink). 2 additional analogue sources also can be connected to form a complete system. The built-in high quality power amplifier stage easily drives high-quality speakers!  Stream Box DSA is ready for use with streaming service Spotify and LOSSLESS audio music platform TIDAL. Other streaming services like Deezer, Grooveshark etc can be implemented using 3rd party applications. Superb audio playback including 24bit HD music is self-evident, like outstanding technical data for distortion and noise levels. Navigation can be done via IR remote (which is included) and/or free Android / iOS App.  Features:24 bit/192kHz Hires Audio streaming client  Spotify Connect support (firmware 4.0.61.83 or higher)  LOSSLESS-Streaming with TIDAL  Volume control using IR remote, front buttons, App  Top-grade Highend PCM 1796 DAC  WAV, AIFF, FLAC, WMA9 lossless, ALAC & AAC playback  FLAC decoding for all 9 compression levels including Level 0  (data rate up to approximately 9 mbit/s)  Gapless playback of all audio formats  Built-in audiophile amplifier 2x 60 watts (4 ohms)  Fixed & variable analogue audio outputs (RCA)  2x analogue inputs (RCA)  2x USB & 2x digital inputs (coax & optical Toslink)  Search functionality fast forward and back  Alphanumeric search  3,5“ colour display shows cover art and metadata  Multiple display languages  Wifi 802.11 b/g/n allowing real 24/192 with Wifi  Solid metal casework prevents from interference  Specifications:Audio: MP3, FLAC (up to 24bit/192kHz including 24/176), WMA9-lossless, AIFF, AAC, ALAC, LPCM (upto 24bit/192kHz), Ogg Vorbis 1.0, ASXInternetradio: vTuner includedGapless: all audio formats (using IR remote or Box Control App)Inputs: Network 1x digital coax, 1x digital optic, 2x analogue 2x USB 2.0 (24/192, type A), supportsOutput: RCA (analogue, fixed volume level) Coax S/PDIF (digital)Network: Wi-Fi IEEE 802.11 b/g/n & Ethernet (10/100 BaseT)Faceplate: black Dimensions: 72 x 206 x 230 mm (HxWxD) without antennaWeight: 2,90 kg 

Today, many amplifiers do not have a specific phono cartridge input. Phono Box E is an ideal phono preamplifier for these hifi systems. Phono Box E accepts MM cartridges and offers an audiophile music experience at an entry-level price. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Phono Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Phono Box E can be connected easily to a line-input (AUX etc) of your amplifier.   Features:Amplification and RIAA equalisation for MM cartridges  Design principle inspired by Dr. Sykora  SMD circuitry  Special low noise components  Internal metal shielding  Small size allows installation close to record player  Gold plated RCA connection sockets  Outboard power supply included​​Specifications:Input impedance: 47kohmsInput capacitance: 120pFGain: 40dBOutput voltage(typically): 500mV @ 1KhZ with 5mV inputNoise floor: 88dB (A weighted)THD:

Today, many amplifiers do not have a specific phono cartridge input. Phono Box E is an ideal phono preamplifier for these hifi systems. Phono Box E accepts MM cartridges and offers an audiophile music experience at an entry-level price. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Phono Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Phono Box E can be connected easily to a line-input (AUX etc) of your amplifier.   Features:Amplification and RIAA equalisation for MM cartridges  Design principle inspired by Dr. Sykora  SMD circuitry  Special low noise components  Internal metal shielding  Small size allows installation close to record player  Gold plated RCA connection sockets  Outboard power supply included  ​Specifications:Input impedance: 47kohmsInput capacitance: 120pFGain: 40dBOutput voltage(typically): 500mV @ 1KhZ with 5mV inputNoise floor: 88dB (A weighted)THD:

Record Box E is an high-quality phono preamplifier, that offers the possibility to convert your valuable vinyls into computer music data. Re-cord Box E accepts both MM & MC cartridges and gives audiophile music experience at an entry-level price. The integrated A/D converter operates with Windows and MAC operating systems and connects via USB to your computer. Therefore your valuable vinyl collection can be digitised, especially for use in portable music players. Advanced circuitry and SMD construction keep noise and distortion at a surprisin-gly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Record Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Record Box E can be connected easily to a line-input (AUX etc) of your amplifier.   Features:Amplification and RIAA equalisation for MM & MC  Design principle inspired by Dr. Sykora  Digitalisation of vinyl for recording direct to USB with suitable recording programs  Automatic recognition, no additional drivers needed  Runs on Windows®, Mac OS® & Linux operating systems  SMD circuitry with special low noise components  Internal metal shielding  Small size allows installation close to record player  Gold plated RCA connection sockets  Outboard power supply included  Black casing  ​Specifications:Input capacitance/input impedance: MC: 100ohms/120pF (low output MC)-MM: 47kohms/120pF (MM or high output MC)Gain, MM / MC: 40dB / 60dBOutput voltage typically: 300mV/1kHz at 3mV/1kHz (MM) or 0,3mV/1kHz (MC)Max. output: 9,5V (1kHz)Noise floor MM / MC: 94dB (A weighted) / 75dB (A weighted)THD MM / MC:

The entry-level DAC Box E is an excellent D/A converter for digital sound sources using optical and coaxial connections. Despite the low price, it sounds outstanding and supports HD music data up to 24/192kHz. DAC Box E uses high quality components like precision D/A converter chips and a low noise output stage. It will act as a perfect upgrade for any digital stereo audio source, especially for best-buy CD-players, Bluray or DVD players with CD playback, set-top boxes etc!  The whole audio circuitry design is perfectly linear with low output impedance to avoid any negative interference with cables or pre-amps. Its class-leading audio performance makes DAC Box E an outstanding low-cost audio bargain!  Features:24bit / 192kHz D/A conversion  Co-axial (RCA) & optical (Toslink) S/PDIF input  SMD circuitry  Special low noise components  Internal metal shielding  Small size allows installation close to source  Gold plated RCA connection sockets  Outboard power supply included Specifications:Line-level output: 1 pair RCA/phono socketsOutput voltage: 0,7VrmsDigital inputs: 1x coaxial (S/PDIF), 1x optical (TOSlink®)D/A converter: Texas Instruments TLV320DAC23 Cirrus Logic CS4344. 24Bit/192kHzSupported audio format: PCM (LPCM) (Stereo only, no support for multi-channel formats)Sampling rates Optical and coaxial input: 44,1kHz, 48kHz, 96kHz and 192kHz (coaxial only)Outboard power supply: 18V/500mA DCPower consumption: 200mA DC,Dimensions W x H x D (D with sockets): 120 x 32 x 100 (106)mmWeight: 250g without power supply

The entry-level DAC Box E is an excellent D/A converter for digital sound sources using optical and coaxial connections. Despite the low price, it sounds outstanding and supports HD music data up to 24/192kHz. DAC Box E uses high quality components like precision D/A converter chips and a low noise output stage. It will act as a perfect upgrade for any digital stereo audio source, especially for best-buy CD-players, Bluray or DVD players with CD playback, set-top boxes etc!  The whole audio circuitry design is perfectly linear with low output impedance to avoid any negative interference with cables or pre-amps. Its class-leading audio performance makes DAC Box E an outstanding low-cost audio bargain!  Features:24bit / 192kHz D/A conversion  Co-axial (RCA) & optical (Toslink) S/PDIF input  SMD circuitry  Special low noise components  Internal metal shielding  Small size allows installation close to source  Gold plated RCA connection sockets  Outboard power supply included Specifications:Line-level output: 1 pair RCA/phono socketsOutput voltage: 0,7VrmsDigital inputs: 1x coaxial (S/PDIF), 1x optical (TOSlink®)D/A converter: Texas Instruments TLV320DAC23 Cirrus Logic CS4344. 24Bit/192kHzSupported audio format: PCM (LPCM) (Stereo only, no support for multi-channel formats)Sampling rates Optical and coaxial input: 44,1kHz, 48kHz, 96kHz and 192kHz (coaxial only)Outboard power supply: 18V/500mA DCPower consumption: 200mA DC,Dimensions W x H x D (D with sockets): 120 x 32 x 100 (106)mmWeight: 250g without power supply

Record Box E is an high-quality phono preamplifier, that offers the possibility to convert your valuable vinyls into computer music data. Re-cord Box E accepts both MM & MC cartridges and gives audiophile music experience at an entry-level price. The integrated A/D converter operates with Windows and MAC operating systems and connects via USB to your computer. Therefore your valuable vinyl collection can be digitised, especially for use in portable music players. Advanced circuitry and SMD construction keep noise and distortion at a surprisin-gly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Record Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Record Box E can be connected easily to a line-input (AUX etc) of your amplifier.   Features:Amplification and RIAA equalisation for MM & MC  Design principle inspired by Dr. Sykora  Digitalisation of vinyl for recording direct to USB with suitable recording programs  Automatic recognition, no additional drivers needed  Runs on Windows®, Mac OS® & Linux operating systems  SMD circuitry with special low noise components  Internal metal shielding  Small size allows installation close to record player  Gold plated RCA connection sockets  Outboard power supply included  White casing  ​Specifications:Input capacitance/input impedance: MC: 100ohms/120pF (low output MC)-MM: 47kohms/120pF (MM or high output MC)Gain, MM / MC: 40dB / 60dBOutput voltage typically: 300mV/1kHz at 3mV/1kHz (MM) or 0,3mV/1kHz (MC)Max. output: 9,5V (1kHz)Noise floor MM / MC: 94dB (A weighted) / 75dB (A weighted)THD MM / MC:

A turntable set-up does not need to be complicated like rocket-science, our VTE turntable proves that. This good sounding belt-driven deck offers 2 versions for left– and right-handed users.The VTE turntable can be positioned on a table or mounted on a wall. The fastest installation process is made possible, because it comes pre-adjusted out of the box. No further set-up is needed. Tracking force and anti-skating are carefully set.Features:Vertical standing or wall mount option included  Choose “R” (right-handed) or “L” (left-handed) version  Instant playback with super-easy setup  Record clamp for secure record fixing  Belt drive with silicone belt  Low vibration synchronous motor & DC power supply  8,6” aluminium tonearm  Ortofon OM5e cartridge, pre-mounted  Pre-adjusted tracking force & anti-skating force  Special mechanism for perfect tracking in vertical position  Pre-mounted gold-plated RCA interconnect cable  Specifications:Speed: 33, 45 (manual speed change)Principle: belt driveSpeed variance: 33: 0,8% 45: 0,7%Wow & flutter: 33: 0,29% 45: 0,27%Signal to noise: - 65dBPlatter: 300mm MDF with felt mat (0,8kg)Main bearing: stainless steelEffective arm length: 218,5 mmOverhang: 22,0mmEffective tonearm mass: 8,0grCounterweight for mass: 3 - 5,5g (included)Tracking force range: 0 - 25mN (OM5 18mN pre-adjusted)Included accessory: power supply, record clampPower consumption: 4,5 wattsDimensions (standing on table): 430 x 345 x 245mm (WxHxD)Dimensions (mounted on wall): 430 x 310 x 130mm (WxHxD)Weight: 2,8 kg net 

A turntable set-up does not need to be complicated like rocket-science, our VTE turntable proves that. This good sounding belt-driven deck offers 2 versions for left– and right-handed users.The VTE turntable can be positioned on a table or mounted on a wall. The fastest installation process is made possible, because it comes pre-adjusted out of the box. No further set-up is needed. Tracking force and anti-skating are carefully set.Features:Vertical standing or wall mount option included  Choose “R” (right-handed) or “L” (left-handed) version  Instant playback with super-easy setup  Record clamp for secure record fixing  Belt drive with silicone belt  Low vibration synchronous motor & DC power supply  8,6” aluminium tonearm  Ortofon OM5e cartridge, pre-mounted  Pre-adjusted tracking force & anti-skating force  Special mechanism for perfect tracking in vertical position  Pre-mounted gold-plated RCA interconnect cable  Specifications:Speed: 33, 45 (manual speed change)Principle: belt driveSpeed variance: 33: 0,8% 45: 0,7%Wow & flutter: 33: 0,29% 45: 0,27%Signal to noise: - 65dBPlatter: 300mm MDF with felt mat (0,8kg)Main bearing: stainless steelEffective arm length: 218,5 mmOverhang: 22,0mmEffective tonearm mass: 8,0grCounterweight for mass: 3 - 5,5g (included)Tracking force range: 0 - 25mN (OM5 18mN pre-adjusted)Included accessory: power supply, record clampPower consumption: 4,5 wattsDimensions (standing on table): 430 x 345 x 245mm (WxHxD)Dimensions (mounted on wall): 430 x 310 x 130mm (WxHxD)Weight: 2,8 kg net 

A turntable set-up does not need to be complicated like rocket-science, our VTE turntable proves that. This good sounding belt-driven deck offers 2 versions for left– and right-handed users.The VTE turntable can be positioned on a table or mounted on a wall. The fastest installation process is made possible, because it comes pre-adjusted out of the box. No further set-up is needed. Tracking force and anti-skating are carefully set.Features:Vertical standing or wall mount option included  Choose “R” (right-handed) or “L” (left-handed) version  Instant playback with super-easy setup  Record clamp for secure record fixing  Belt drive with silicone belt  Low vibration synchronous motor & DC power supply  8,6” aluminium tonearm  Ortofon OM5e cartridge, pre-mounted  Pre-adjusted tracking force & anti-skating force  Special mechanism for perfect tracking in vertical position  Pre-mounted gold-plated RCA interconnect cable  Specifications:Speed: 33, 45 (manual speed change)Principle: belt driveSpeed variance: 33: 0,8% 45: 0,7%Wow & flutter: 33: 0,29% 45: 0,27%Signal to noise: - 65dBPlatter: 300mm MDF with felt mat (0,8kg)Main bearing: stainless steelEffective arm length: 218,5 mmOverhang: 22,0mmEffective tonearm mass: 8,0grCounterweight for mass: 3 - 5,5g (included)Tracking force range: 0 - 25mN (OM5 18mN pre-adjusted)Included accessory: power supply, record clampPower consumption: 4,5 wattsDimensions (standing on table): 430 x 345 x 245mm (WxHxD)Dimensions (mounted on wall): 430 x 310 x 130mm (WxHxD)Weight: 2,8 kg net 

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from laminated particle board. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction. The main chassis is made from lightweight, but very stiff particle board.  Essential II Phono USB utilises a straight 8,6“ aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play“ solution, than it‘s predecessor. Special feet effectively decouples the turntable from the surface.  Because Essential II Phono USB comes with pre-mounted cartridge and built-in phono preamplifier with USB output, connection to both line-level input of your hifi system and PC/Mac easily can be used simultaneously! Open-Source recording software Audacity® is not based on a specific platform, is available for free and the perfect solution for recording and processing of your audio data.  Χαρακτηριστικά:Belt drive with silicone belt  Low vibration synchronous motor  Integrated motor control with DC power supply secures silent running  Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom  8,6” aluminium tonearm with sapphire bearings  Ortofon OM5e cartridge, pre-mounted  Pre-mounted gold-plated RCA interconnect cable  Built-in MM phono stage  Connections: line-level RCA to amp & USB to PC/Mac (simultaneously)  Special turntable feet for effective decoupling  Colour options: Black, Red, White   

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from laminated particle board. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction. The main chassis is made from lightweight, but very stiff particle board.  Essential II Phono USB utilises a straight 8,6“ aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play“ solution, than it‘s predecessor. Special feet effectively decouples the turntable from the surface.  Because Essential II Phono USB comes with pre-mounted cartridge and built-in phono preamplifier with USB output, connection to both line-level input of your hifi system and PC/Mac easily can be used simultaneously! Open-Source recording software Audacity® is not based on a specific platform, is available for free and the perfect solution for recording and processing of your audio data.  Χαρακτηριστικά:Belt drive with silicone belt  Low vibration synchronous motor  Integrated motor control with DC power supply secures silent running  Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom  8,6” aluminium tonearm with sapphire bearings  Ortofon OM5e cartridge, pre-mounted  Pre-mounted gold-plated RCA interconnect cable  Built-in MM phono stage  Connections: line-level RCA to amp & USB to PC/Mac (simultaneously)  Special turntable feet for effective decoupling  Colour options: Black, Red, White   

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from laminated particle board. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction. The main chassis is made from lightweight, but very stiff particle board.  Essential II Phono USB utilises a straight 8,6“ aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play“ solution, than it‘s predecessor. Special feet effectively decouples the turntable from the surface.  Because Essential II Phono USB comes with pre-mounted cartridge and built-in phono preamplifier with USB output, connection to both line-level input of your hifi system and PC/Mac easily can be used simultaneously! Open-Source recording software Audacity® is not based on a specific platform, is available for free and the perfect solution for recording and processing of your audio data.  Χαρακτηριστικά:Belt drive with silicone belt  Low vibration synchronous motor  Integrated motor control with DC power supply secures silent running  Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom  8,6” aluminium tonearm with sapphire bearings  Ortofon OM5e cartridge, pre-mounted  Pre-mounted gold-plated RCA interconnect cable  Built-in MM phono stage  Connections: line-level RCA to amp & USB to PC/Mac (simultaneously)  Special turntable feet for effective decoupling  Colour options: Black, Red, White   

Many new audio systems, like home cinema receivers, soundbars, multiroom audio, TVs and Bluetooth speakers only offer digital optic input connections: So up to now vinyl lovers using such systems had no chance to play their records on those systems. The perfect solution is: Essential II DIGITAL An unique belt-drive turntable with built-in MM pre-amplifier that features digital optic as well as analogue amplifier connection options. Delivered with acrylic lid and in white.Features:Ideal for connection to multiroom systems (SONOS, HEOS etc) or TVs, soundbars and portable audio  Perfect solution if only a digital input is available  Easy set-up  Belt drive with silicone belt and low vibration motor  8,6” aluminium tonearm with sapphire bearings  Ortofon OM5e cartridge pre-mounted  Built-in phono pre-amplifier with analogue & digital out  Gold-plated RCA interconnect cable included  Special turntable feet for effective decoupling  Specifications:Speed: 33, 45 (manual speed change)Principle: belt driveSpeed variance: 33: 0,80% 45: 0,70%Wow & flutter: 33: 0,29% 45: 0,27%Platter: 300mm particle board with felt mat (0,8kg)Main bearing: stainless steelEffective arm length: 218,5 mmOverhang: 22,0mmEffective tonearm mass: 8,0grCounterweight for mass: 3 - 5,5g (included) 

Many new audio systems, like home cinema receivers, soundbars, multiroom audio, TVs and Bluetooth speakers only offer digital optic input connections: So up to now vinyl lovers using such systems had no chance to play their records on those systems. The perfect solution is: Essential II DIGITAL An unique belt-drive turntable with built-in MM pre-amplifier that features digital optic as well as analogue amplifier connection options. Delivered with acrylic lid and in black.Features:Ideal for connection to multiroom systems (SONOS, HEOS etc) or TVs, soundbars and portable audio  Perfect solution if only a digital input is available  Easy set-up  Belt drive with silicone belt and low vibration motor  8,6” aluminium tonearm with sapphire bearings  Ortofon OM5e cartridge pre-mounted  Built-in phono pre-amplifier with analogue & digital out  Gold-plated RCA interconnect cable included  Special turntable feet for effective decoupling  Specifications:Speed: 33, 45 (manual speed change)Principle: belt driveSpeed variance: 33: 0,80% 45: 0,70%Wow & flutter: 33: 0,29% 45: 0,27%Platter: 300mm particle board with felt mat (0,8kg)Main bearing: stainless steelEffective arm length: 218,5 mmOverhang: 22,0mmEffective tonearm mass: 8,0grCounterweight for mass: 3 - 5,5g (included) 

Many new audio systems, like home cinema receivers, soundbars, multiroom audio, TVs and Bluetooth speakers only offer digital optic input connections: So up to now vinyl lovers using such systems had no chance to play their records on those systems. The perfect solution is: Essential II DIGITAL An unique belt-drive turntable with built-in MM pre-amplifier that features digital optic as well as analogue amplifier connection options. Delivered with acrylic lid and in red.Features:Ideal for connection to multiroom systems (SONOS, HEOS etc) or TVs, soundbars and portable audio  Perfect solution if only a digital input is available  Easy set-up  Belt drive with silicone belt and low vibration motor  8,6” aluminium tonearm with sapphire bearings  Ortofon OM5e cartridge pre-mounted  Built-in phono pre-amplifier with analogue & digital out  Gold-plated RCA interconnect cable included  Special turntable feet for effective decoupling  Specifications:Speed: 33, 45 (manual speed change)Principle: belt driveSpeed variance: 33: 0,80% 45: 0,70%Wow & flutter: 33: 0,29% 45: 0,27%Platter: 300mm particle board with felt mat (0,8kg)Main bearing: stainless steelEffective arm length: 218,5 mmOverhang: 22,0mmEffective tonearm mass: 8,0grCounterweight for mass: 3 - 5,5g (included) 

Pure CD player are in contrast to DVD or Blu-ray Disc player frequently better in playback of stereo CDs. The CD Box DS (as well as CD Box S) is designed exclusively for playing audio CDs on the "Red Book standard" by Philips and is in this discipline, a true master of his trade. In addition to a high-quality, durable drive is essential for the perfect CD playback as well as a servo control optimized for audio playback. Our servo system allows real-time scanning with minimal jitter. Together with advanced D/A converter blocks a real highend reproduction is achieved, as it can not be found in this price range. Visually the CD Box DS is adapted to the new DS line with a thicker front panel, no screws in the front and a smaller uniform LED.  Specifications:24bit/192kHz Burr Brown DAC (PCM1796)  4-layer suspended CD drive  Excellent only-CD transport  Blue tiger“ servo board for 1:1 CD playback  Slot-in mechanism  DC power supply (< 1 watt standby power)  3mm aluminium faceplate  High contrast dot-matrix display  IR remote control with volume level adjustment of Pro-Ject amplifiers  Solid cabinet protects against vibration and interference  Faceplate silver or black  

Pure CD player are in contrast to DVD or Blu-ray Disc player frequently better in playback of stereo CDs. The CD Box DS (as well as CD Box S) is designed exclusively for playing audio CDs on the "Red Book standard" by Philips and is in this discipline, a true master of his trade. In addition to a high-quality, durable drive is essential for the perfect CD playback as well as a servo control optimized for audio playback. Our servo system allows real-time scanning with minimal jitter. Together with advanced D/A converter blocks a real highend reproduction is achieved, as it can not be found in this price range. Visually the CD Box DS is adapted to the new DS line with a thicker front panel, no screws in the front and a smaller uniform LED.  Specifications:24bit/192kHz Burr Brown DAC (PCM1796)  4-layer suspended CD drive  Excellent only-CD transport  Blue tiger“ servo board for 1:1 CD playback  Slot-in mechanism  DC power supply (< 1 watt standby power)  3mm aluminium faceplate  High contrast dot-matrix display  IR remote control with volume level adjustment of Pro-Ject amplifiers  Solid cabinet protects against vibration and interference  Faceplate silver or black  

RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability.  A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look!  Features:Precision belt drive using free-standing synchronous motor  Central mass point optimizes vibrancy behaviour  Ultra precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Platter made from MDF using vinyl mat  10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments  Magnetic antiskating  Counterweight with TPE damping  Available with or without Ortofon 2M Silver cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm MDFMains bearing:    stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise    - 71dBTonearm    10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force:    0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net​

RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability.  A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look!  Features:Precision belt drive using free-standing synchronous motor  Central mass point optimizes vibrancy behaviour  Ultra precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Platter made from MDF using vinyl mat  10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments  Magnetic antiskating  Counterweight with TPE damping  Available with or without Ortofon 2M Silver cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm MDFMains bearing:    stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise    - 71dBTonearm    10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force:    0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net​

RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability.  A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look!  Features:Precision belt drive using free-standing synchronous motor  Central mass point optimizes vibrancy behaviour  Ultra precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Platter made from MDF using vinyl mat  10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments  Magnetic antiskating  Counterweight with TPE damping  Available with or without Ortofon 2M Silver cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm MDFMains bearing:    stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise    - 71dBTonearm    10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force:    0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net​

RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability.  A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look!  Features:Precision belt drive using free-standing synchronous motor  Central mass point optimizes vibrancy behaviour  Ultra precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Platter made from MDF using vinyl mat  10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments  Magnetic antiskating  Counterweight with TPE damping  Available with or without Ortofon 2M Silver cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm MDFMains bearing:    stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise    - 71dBTonearm    10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force:    0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net​

RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability.  A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look!  Features:Precision belt drive using free-standing synchronous motor  Central mass point optimizes vibrancy behaviour  Ultra precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Platter made from MDF using vinyl mat  10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments  Magnetic antiskating  Counterweight with TPE damping  Available with or without Ortofon 2M Silver cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm MDFMains bearing:    stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise    - 71dBTonearm    10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force:    0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net​

RPM 5 Carbon utilises a radical concept with a lot of innovations, that originate from its big brother RPM 9 Carbon: A low resonance chassis holds a newly designed inverted platter bearing with ceramic ball for further reduced rumble.The acoustically inert platter is made from acrylic. An outboard 15V AC motor is smoothly driven using an ultra-precision AC generator with DC power supply for further enhanced speed stability. The classy 9“ cc Evo tonearm, which is made from carbon fibre is suitable for any high-quality MM or MC cartridge.A TPE-damped counterweight eliminates unwanted resonances. All ingredients add up to a miracle in sound for the price. Its ultra-stylish look is available in 3 exclusive high-gloss finish versions.  Features:Precision belt drive principle using synchronous motor  Ultra-precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Acoustical inert acrylic platter  9” cc EVO tonearm made from carbon  Counterweight with TPE damping  Adjustable aluminium tip-toe feet  Available with or without Ortofon Quintet red cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm acrylicMains bearing: stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,12% I 45: +/- 0,10%Speed drift: 33: +/- 0,17% I 45: +/- 0,08%Signal to noise    - 73dBTonearm    9” cc EVO carbonEffective arm length: 230 mmEffective arm mass: 8 gOverhang: 18mmTracking force: 0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption:5 watt max / < 0,3 watt standbyDimensions: 430 x 150 x 323 mm (WxHxD)Weight: 8,0 kg net

RPM 5 Carbon utilises a radical concept with a lot of innovations, that originate from its big brother RPM 9 Carbon: A low resonance chassis holds a newly designed inverted platter bearing with ceramic ball for further reduced rumble.The acoustically inert platter is made from acrylic. An outboard 15V AC motor is smoothly driven using an ultra-precision AC generator with DC power supply for further enhanced speed stability. The classy 9“ cc Evo tonearm, which is made from carbon fibre is suitable for any high-quality MM or MC cartridge.A TPE-damped counterweight eliminates unwanted resonances. All ingredients add up to a miracle in sound for the price. Its ultra-stylish look is available in 3 exclusive high-gloss finish versions.  Features:Precision belt drive principle using synchronous motor  Ultra-precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Acoustical inert acrylic platter  9” cc EVO tonearm made from carbon  Counterweight with TPE damping  Adjustable aluminium tip-toe feet  Available with or without Ortofon Quintet red cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm acrylicMains bearing: stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,12% I 45: +/- 0,10%Speed drift: 33: +/- 0,17% I 45: +/- 0,08%Signal to noise    - 73dBTonearm    9” cc EVO carbonEffective arm length: 230 mmEffective arm mass: 8 gOverhang: 18mmTracking force: 0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption:5 watt max / < 0,3 watt standbyDimensions: 430 x 150 x 323 mm (WxHxD)Weight: 8,0 kg net

RPM 5 Carbon utilises a radical concept with a lot of innovations, that originate from its big brother RPM 9 Carbon: A low resonance chassis holds a newly designed inverted platter bearing with ceramic ball for further reduced rumble.The acoustically inert platter is made from acrylic. An outboard 15V AC motor is smoothly driven using an ultra-precision AC generator with DC power supply for further enhanced speed stability. The classy 9“ cc Evo tonearm, which is made from carbon fibre is suitable for any high-quality MM or MC cartridge.A TPE-damped counterweight eliminates unwanted resonances. All ingredients add up to a miracle in sound for the price. Its ultra-stylish look is available in 3 exclusive high-gloss finish versions.  Features:Precision belt drive principle using synchronous motor  Ultra-precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Acoustical inert acrylic platter  9” cc EVO tonearm made from carbon  Counterweight with TPE damping  Adjustable aluminium tip-toe feet  Available with or without Ortofon Quintet red cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm acrylicMains bearing: stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,12% I 45: +/- 0,10%Speed drift: 33: +/- 0,17% I 45: +/- 0,08%Signal to noise    - 73dBTonearm    9” cc EVO carbonEffective arm length: 230 mmEffective arm mass: 8 gOverhang: 18mmTracking force: 0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption:5 watt max / < 0,3 watt standbyDimensions: 430 x 150 x 323 mm (WxHxD)Weight: 8,0 kg net

The Clean it carbon fibre stylus cleaning brush is suitable for daily cleaning of the stylus. The stylus brush is the best tool for quick maintenance and daily cleaning of your needle tip. Clean it gently removes dust and crustification with thousands of the finest carbon fibres. The result is a clean and good sounding diamond stylus that ensures a perfect reproduction of your records.  Specifications: Smooth cleaner for diamant stylus   Conductive carbon fibers   Eliminates static charges   Removes finest dust particles   

Turntable mats have been always a big discussion how they influence the sound. The interaction between the record and the surface can be tracked very easily by the supersensitivity of a good pick up cartridge.  Common felt mats give a smooth contact between record and platter but has the disadvantage with static. That means that feltmats often collect a lot of dust which can be then transfered to the record. Also the damping ability is very limited which can be a problem with metal platters. Thick rubbermats overdamp the record and have an isolation effect which leaves the static on the record and hearable noise clicks are the result.  Leather and Cork are 2 different but very interesting options to upgrade the sound quality. Resonances Are damped more effectively than felt, they keep dust away and they have also enough contactivity to avoid static.  What is better depends on taste and the actual platter design.A very costeffectiv way to improve the sound and have less noise by static and dust. You can hear a difference!  

Individual colours give your turntable a very special appearance. 

Carbon-fibre brush for record cleaning.

Dust protection cover. Crystal clear acrylic cover for turntables   4 models protect turntable and needle  Weight: 4,3kg Outside dimensions: 525 x 290 x 425mmInside dimensions: 515 x 285 x 415mm

Clear acrylic dust cover, suitable for smaller Pro-Ject turntables.Weight: 2,9kg Outside dimensions: 460 x 225 x 365mmInside dimensions: 450 x 220 x 355mm

Clean your valuable vinyls gentle, but efficient! Clean records sound much better and help to protect the  stylus from dust. Spin Clean clears manually and is suitable for all kinds of records: LP‘s, 45‘s, 78‘s  Spin Clean Record washer system includes all necessary parts: 4 oz. (118ml) washer fluid, 2 brushes and dryer cloths. The cleaning process is extremely simple! First you fill distlled water into the basin, than you add washer fluid and insert the record you want to clean.  Both sides of the record are clarified in one go and dust remains at the bottom of the basin. Of course all components of Spin-Clean are available as accessory!