Pro-Ject

Do you have a turntable, but no phono input on your receiver, integrated amp, or shelf system? Or, does your system's built-in phono stage sound flat and lifeless? No problem — just hook up the Pro-Ject Phono Box DC preamplifer in-line between your record player and any of your receiver's line-level inputs, and you're ready to enjoy your LP collection all over again. Pro-Ject's clean, simple design uses premium quality parts to deliver the warm, relaxed sound that vinyl is famous for. Its compact all-metal body rejects interference to ensure clean sound, and the gold-plated inputs and outputs resist corrosion for the best possible signal transfer. This preamp is compatible with both moving magnet and moving coil cartridges, so you can count on proper matching with virtually any turntable and cartridge combination.Specifications:compatible with moving magnet and moving coil phono cartridgesexternal power supply for reduced noise and interferencegold-plated input and output jacks for solid, corrosion-free connectionsdual-mono circuitry for optimal channel separationsmall size allows placement near turntableinput impedance: 47 kohms/120pF (MM); 100ohms/120pF (MC)gain: 40dB (MM); 60dB (MC)signal-to-noise ratio: 86dB (MM); 68dB (MC)THD: 0.01% (MM); 0.05% (MC)RIAA response accuracy: 0.5dB (20-20,000 Hz)4-1/8"W x 1-1/2"H x 5-3/8"D

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours ​​

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in.  The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.  Belt drive system with low vibration DC motor   Central gravity mass point made from artificial stone   Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom   Low resonance MDF platter with felt mat   8,6” ultra low mass tonearm with straight arm tube   Pre-adjusted tracking force & antiskating   Gold-plated RCA contacts & cartridge pins   Colour options: red-black, white-black, silver-black  Specifications:speed : 33, 45 (manual speed change)Speed variance: 33: 0,2% 45: 0,18%Wow & flutter: 33: 0,14% 45: 0,13%platter: 300mm MDFtonearm: 8,6” metal tubeeffective arm length: 218,5 mmoverhang: 22,0 mmeffective tonearmmass: 8,0grcounterweight for cartridge mass: 3 - 5,5g (included)tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)output: RCA to phono inputincluded accessory: RCA cable, 15V DC power supplypower consumption: 4,0 wattsdimensions: 430 x 90 x 300mm (WxHxD)weight: 2,7 kg net

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in.  The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.  Belt drive system with low vibration DC motor   Central gravity mass point made from artificial stone   Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom   Low resonance MDF platter with felt mat   8,6” ultra low mass tonearm with straight arm tube   Pre-adjusted tracking force & antiskating   Gold-plated RCA contacts & cartridge pins   Colour options: red-black, white-black, silver-black  Specifications:speed : 33, 45 (manual speed change)Speed variance: 33: 0,2% 45: 0,18%Wow & flutter: 33: 0,14% 45: 0,13%platter: 300mm MDFtonearm: 8,6” metal tubeeffective arm length: 218,5 mmoverhang: 22,0 mmeffective tonearmmass: 8,0grcounterweight for cartridge mass: 3 - 5,5g (included)tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)output: RCA to phono inputincluded accessory: RCA cable, 15V DC power supplypower consumption: 4,0 wattsdimensions: 430 x 90 x 300mm (WxHxD)weight: 2,7 kg net

RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability.  A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look!  Features:Precision belt drive using free-standing synchronous motor  Central mass point optimizes vibrancy behaviour  Ultra precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Platter made from MDF using vinyl mat  10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments  Magnetic antiskating  Counterweight with TPE damping  Available with or without Ortofon 2M Silver cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm MDFMains bearing:    stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise    - 71dBTonearm    10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force:    0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net​

Audiophile 24bit/96kHz D/A-conversion  Precision D/A chip from Texas Instruments  8 times oversampling  3 Inputs; 1x USB, 1x optical (Toslink), 1 x coax (SPDIF)  Gold-plated RCA line level output sockets  Input selector on front  New stylish S-design  Faceplate in silver or black TECHNICAL SPECIFICATIONS: D/A-converterTexas Instruments TLV320DAC23 8 x Oversampling designSampling rates32kHz, 44,1kHz, 48kHz, 96 kHz (opt & coax)THD95dBDigital inputs1 x coax (S/PDIF) 1 x optical (TOSlink®) 1 x Mini-USBAnalogue out1 pair RCA/CinchOutput voltage1,0VeffDimensions W x H x D103 x 36 x 103 103 x 36 x 115 mm (including sockets)Power supply9V DC / 300mAWeight680g without power supply Software  • To take full advantage of the DAC Box S USB features you have to downlod and install: foobar2000, ASIO support andProJect_asio.dllAthensProAudio is not responsible for any programs downloaded.Make sure your computer is equiped with antivirus programs for its safety.