JBL

The JBL PRX815XLFW is a self-powered extended low-frequency subwoofer system. Featuring a JBL 15-inch woofer powered by a 1500-watt class-D amplifier, PRX815XLFW delivers incredible output in a lightweight and compact form factor.The PRX800W series integrates embedded ioSYS technology which enables easier setup and control when used with the HARMAN Connected PA app and compatible products. Connected PA delivers seamless plug-and-play operation with a variety of HARMAN equipment and enables you to control your entire live sound system with one app. Products within the Connected PA system self-identify and retain presets for effortless setup, and setup wizards help you quickly optimize speaker levels, configuration settings and EQ.Current products with embedded ioSYS technology and HARMAN Connected PA compatibility include the Ui24R mixer, JBL PRX800W loudspeakers, dbx Di1 direct boxes, and AKG P5i microphones.Features:Built-in Wi-Fi for wireless control of your system from anywhere in the venueFree PRX Connect mobile app for iOS and Android provides wireless control over volume levels, 8-band parametric EQ and up to 50ms of speaker delay to fine-tune your soundClass-leading 1500-watt amplifier delivers ample power to fill your venueJBL Differential Drive® transducers for higher SPL in a lightweight designNext-generation JBL neodymium compression driversRedesigned Crown input technology, including XLR, 1/4” and RCA inputs plus XLR loop-throughIntelligent variable-speed fan activates only when needed to reduce noiseUpdated tuning delivers flat frequency response and smooth off-axis behaviorDurable wooden cabinets, tour-proven DuraFlex™ finish and dent-resistant 16-gauge grillesUniversal power supply for worldwide compatibilitydbx Type IV™ limiting ensures clear, accurate sound at high volumesBrutal testing regimen—including the famous JBL 100-hour power test—ensures reliable performanceSpecifications:System Type: Self Powered 15” subwooferMaximum SPL Output: 131 dB peakFrequency Range (-10 dB): 36 Hz - 98 HzFrequency Response (±3 dB): 40 Hz – 87 HzInput Connectors: Two Balanced female XLR/ 1/4” combo connectorsInput Impedance: 20K Ohms (balanced)Signal Indicators: Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting Signal: Green LED indicates signal presentPower: Blue indicates system has power and ready to pass audio.Dynamic Control (Input): dbx Type IV™ limiter circuitInternal Crossover Frequency: 80 Hz DSPLoop out Crossover Frequency: 120 Hz analog 24 dB filter slope 

The PRX812W two-way, 12” portable powered PA speaker is a member of the most advanced loudspeaker family in its class. Wi-Fi technology and sophisticated DSP give you complete control over the tuning and performance of your system—from anywhere in the venue—via the free PRX Connect app.An efficient 1500- watt class-D amplifier and patented JBL Differential Drive technology provide best-in-class power handling while greatly reducing system weight. And the rugged all-wood cabinets feature a redesigned input panel and universal power supply for easy, reliable operation at gigs worldwide. Thoughtfully designed from the ground up to deliver legendary JBL sound, PRX800W represents the next generation in smart live sound reinforcement.Features:Built in Wi-Fi for wireless control of your system from anywhere in the venueFree PRX Connect mobile app provides wireless control over levels, parametric EQ, user presets, and up to 50ms of user delay to fine-tune your sound\Class-leading 1500-watt amplifier delivers ample power to fill your venueJBL Differential Drive® transducers for higher SPL in a lightweight designNext-generation JBL neodymium compression driversCrown-designed input panel with XLR, 1/4”, andRCA inputs, plus XLR loop-throughDurable construction with wooden cabinets, tour-proven DuraFlex™ finish, and dent-resistant cloth-backed 16-gauge grillesUniversal power supply for worldwide compatibilityDemanding 100-hour test regimen ensures reliable performanceIntelligent variable-speed fan activates only when needed to reduce noiseScalable system that integrates with other JBL portable powered PAs Specifications:Bluetooth: YesImpedance: OhmLow Speaker Size: 12"Freq From (Hz): 50Freq Up to (Hz): 20000Shell Material: Birch-PlywoodPower Rating Continuous Watt/Ohm: 750Max SPL Output (dB): 135Coverage Pattern: 90x50Speaker Type: ActiveSpeaker System: Two WayWidth (cm): 38.5Color: BlackDepth (cm): 34.1High (cm): 59.9Βάρος (Kg): 19.4High Speaker Size: 1.5"

The Control® 25-1 is a two-way 5” speaker with rich sonic character, wide coverage, consistent dispersion, versatile mounting, and a contemporary high-design look that fits into a wide range of decors. This makes Control 25-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.Features:Components: 5-¼” woofer with woven fiberglass cone,  3/4” PEI diaphragm tweeter with fluid coolingContemporary, high-design appearanceBuilt-in InvisiBall® mounting hardware*, plus available U-bracketWeather resistant enclosure and transducersWide 100° x 100° coverage100 Watt power handling (200 Watt program) in direct 8Ω setting, plus built-in 30 Watt 70V/100V multi-tap transformer.High fidelity sound character with broad frequency response of 60 Hz – 20 kHz. Specifications:Type: Frequency Range (-10 dB)Frequency Response (+/-3 dB): 85Hz - 17 kHzPower Rating: 200 W Continuous Program (2 hrs) 100 W (400W peak), Continuous Pink Noise (2 hrs) : Aluminium/Synthetic Resin75 W (300W peak) Continuous Pink Noise (100 hrs): 27dB (1kHz)Maximum Input Voltage: 25.3 V RMS (2 hrs), 50.6 V peakMaximum SPL: 110 dB ave. Continuous Pink Noise (116 dB peak)Sensitivity: 90 dB, 1W/1m (ave. 100 Hz – 10 kHz)Coverage Angle: 100° x 100°Directivity Factor (Q): 6.04 (averaged 1kHz – 16kHz)Directivity Index (DI): 7.6dB (averaged 1kHz – 16kHz)Nominal Impedance: 8 ohms (THRU setting)Crossover Type: 2nd order low-pass, 3rd order high-passTransformer Taps: 70V: 30W, 15W, 7.5W, 3.7W 100V: 30W, 15W, 7.5W : 25µH (1kHz)Insertion Loss

The Control® 25-1 is a two-way 5” speaker with rich sonic character, wide coverage, consistent dispersion, versatile mounting, and a contemporary high-design look that fits into a wide range of decors. This makes Control 25-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.Features:Components: 5-¼” woofer with woven fiberglass cone,  3/4” PEI diaphragm tweeter with fluid coolingContemporary, high-design appearanceBuilt-in InvisiBall® mounting hardware*, plus available U-bracketWeather resistant enclosure and transducersWide 100° x 100° coverage100 Watt power handling (200 Watt program) in direct 8Ω setting, plus built-in 30 Watt 70V/100V multi-tap transformer.High fidelity sound character with broad frequency response of 60 Hz – 20 kHz. Specifications:Type: Frequency Range (-10 dB)Frequency Response (+/-3 dB): 85Hz - 17 kHzPower Rating: 200 W Continuous Program (2 hrs) 100 W (400W peak), Continuous Pink Noise (2 hrs) : Aluminium/Synthetic Resin75 W (300W peak) Continuous Pink Noise (100 hrs): 27dB (1kHz)Maximum Input Voltage: 25.3 V RMS (2 hrs), 50.6 V peakMaximum SPL: 110 dB ave. Continuous Pink Noise (116 dB peak)Sensitivity: 90 dB, 1W/1m (ave. 100 Hz – 10 kHz)Coverage Angle: 100° x 100°Directivity Factor (Q): 6.04 (averaged 1kHz – 16kHz)Directivity Index (DI): 7.6dB (averaged 1kHz – 16kHz)Nominal Impedance: 8 ohms (THRU setting)Crossover Type: 2nd order low-pass, 3rd order high-passTransformer Taps: 70V: 30W, 15W, 7.5W, 3.7W 100V: 30W, 15W, 7.5W : 25µH (1kHz)Insertion Loss

The Control 23-1 is a two-way 3" speaker with rich sonic character, wide coverage, consistent dispersion, versatile mounting, and a contemporary high-design look that fits into a wide range of decors. This makes Control 23-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality compact indoor/outdoor foreground/background music (and/or paging) speaker is required.Features:3” woofer with woven fiberglass cone1/2” PEI diaphragm tweeter with fluid coolingContemporary, high-design appearanceBuilt-in InvisiBall® mounting hardware*, plus available U-bracketWeather resistant enclosure and transducersWide 100° x 100° coverage50 Watt power handling (100 Watt program) in direct 8Ω setting, plus built-in 15 Watt 70V/100V multi-tap transformer.High fidelity sound character with broad frequency response of 70 Hz – 20 kHz.Specifications:Type: Frequency Range (-10 dB)Frequency Response (+/-3 dB): 95 Hz - 19 kHzPower Rating: 100W Continuous Program (2 hrs)50 W (200W peak), Continuous Pink Noise (2 hrs) : Aluminium/Synthetic Resin40 W (160W peak) Continuous Pink Noise (100 hrs): 27dB (1kHz)Maximum Input Voltage: 17.2 V RMS (2 hrs), 34.4 V peakMaximum SPL: 103 dB ave. Continuous Pink Noise (109 dB peak)Sensitivity: 86 dB, 1W/1m (ave. 100 Hz – 10 kHz)Coverage Angle: 100° x 100°Directivity Factor (Q): 5.8 (averaged 1kHz – 16kHz)Directivity Index (DI): 7.2 dB (averaged 1kHz – 16kHz)Nominal Impedance: 8 ohms (THRU setting)Crossover Type: 2nd order low-pass, 2nd order high-passTransformer Taps: 70V: 15W, 7.5W, 3.7W, 1.8W100V: 15W, 7.5W, 3.7W : 25µH (1kHz)Insertion Loss

The Control® 28-1 is a two-way 8” speaker with rich sonic character, wide coverage, consistent coverage, versatile mounting, and a contemporary high-design look that fits into a wide range of decors,This makes Control 28-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.Features:Components: 8” woofer with woven fiberglass cone, 1” PEI diaphragm tweeter with fluid coolingContemporary, high-design appearanceBuilt-in InvisiBall® mounting hardware*, plus available U-bracketWeather resistant enclosure and transducersWide 100° x 100° coverage120 Watt power handling (240 Watt program) in direct 8Ω setting, plus built-in 60 Watt 70V/100V multi-tap transformer.High fidelity sound character with broad frequency response of 45 Hz – 20 kHz.Specifications:Frequency Range (-10 dB): 45 Hz to 20 kHzFrequency Response (+/-3 dB): 62Hz - 16 kHzPower Rating: 240 W Continuous Program (2 hrs) 120 W (480W peak), Continuous Pink Noise (2 hrs) : 90 W (360W peak) Continuous Pink Noise (100 hrs): Maximum Input Voltage: 27.5 V RMS (2 hrs), 55.0 V peakMaximum SPL: 112 dB ave. Continuous Pink Noise (118 dB peak)Sensitivity: 91 dB, 1W/1m (ave. 100 Hz – 10 kHz)Coverage Angle: 100° x 100°Directivity Factor (Q): 7.3 (averaged 1kHz – 16kHz)Directivity Index (DI): 8.3dB (averaged 1kHz – 16kHz)Nominal Impedance: 8 ohms (THRU setting)Crossover Type: 2nd order low-pass, 1st order high-pass, plus conjugate shapingTransformer Taps: 70V: 60W, 30W, 15W, 7.5W100V: 60W, 30W, 15W , Insertion Loss:

The Control® 28-1 is a two-way 8” speaker with rich sonic character, wide coverage, consistent coverage, versatile mounting, and a contemporary high-design look that fits into a wide range of decors,This makes Control 28-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.Features:Components: 8” woofer with woven fiberglass cone, 1” PEI diaphragm tweeter with fluid coolingContemporary, high-design appearanceBuilt-in InvisiBall® mounting hardware*, plus available U-bracketWeather resistant enclosure and transducersWide 100° x 100° coverage120 Watt power handling (240 Watt program) in direct 8Ω setting, plus built-in 60 Watt 70V/100V multi-tap transformer.High fidelity sound character with broad frequency response of 45 Hz – 20 kHz.Specifications:Frequency Range (-10 dB): 45 Hz to 20 kHzFrequency Response (+/-3 dB): 62Hz - 16 kHzPower Rating: 240 W Continuous Program (2 hrs) 120 W (480W peak), Continuous Pink Noise (2 hrs) : 90 W (360W peak) Continuous Pink Noise (100 hrs): Maximum Input Voltage: 27.5 V RMS (2 hrs), 55.0 V peakMaximum SPL: 112 dB ave. Continuous Pink Noise (118 dB peak)Sensitivity: 91 dB, 1W/1m (ave. 100 Hz – 10 kHz)Coverage Angle: 100° x 100°Directivity Factor (Q): 7.3 (averaged 1kHz – 16kHz)Directivity Index (DI): 8.3dB (averaged 1kHz – 16kHz)Nominal Impedance: 8 ohms (THRU setting)Crossover Type: 2nd order low-pass, 1st order high-pass, plus conjugate shapingTransformer Taps: 70V: 60W, 30W, 15W, 7.5W100V: 60W, 30W, 15W , Insertion Loss:

Bringing extended low-frequency performance to music recording and post-production clients, HARMAN’s JBL Professional today introduced the new LSR310S powered studio subwoofer optimized for use with the highly successful JBL 3 Series studio monitors.

The Control 23-1 is a two-way 3" speaker with rich sonic character, wide coverage, consistent dispersion, versatile mounting, and a contemporary high-design look that fits into a wide range of decors. This makes Control 23-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality compact indoor/outdoor foreground/background music (and/or paging) speaker is required.Features:3” woofer with woven fiberglass cone1/2” PEI diaphragm tweeter with fluid coolingContemporary, high-design appearanceBuilt-in InvisiBall® mounting hardware*, plus available U-bracketWeather resistant enclosure and transducersWide 100° x 100° coverage50 Watt power handling (100 Watt program) in direct 8Ω setting, plus built-in 15 Watt 70V/100V multi-tap transformer.High fidelity sound character with broad frequency response of 70 Hz – 20 kHz.Specifications:Type: Frequency Range (-10 dB)Frequency Response (+/-3 dB): 95 Hz - 19 kHzPower Rating: 100W Continuous Program (2 hrs)50 W (200W peak), Continuous Pink Noise (2 hrs) : Aluminium/Synthetic Resin40 W (160W peak) Continuous Pink Noise (100 hrs): 27dB (1kHz)Maximum Input Voltage: 17.2 V RMS (2 hrs), 34.4 V peakMaximum SPL: 103 dB ave. Continuous Pink Noise (109 dB peak)Sensitivity: 86 dB, 1W/1m (ave. 100 Hz – 10 kHz)Coverage Angle: 100° x 100°Directivity Factor (Q): 5.8 (averaged 1kHz – 16kHz)Directivity Index (DI): 7.2 dB (averaged 1kHz – 16kHz)Nominal Impedance: 8 ohms (THRU setting)Crossover Type: 2nd order low-pass, 2nd order high-passTransformer Taps: 70V: 15W, 7.5W, 3.7W, 1.8W100V: 15W, 7.5W, 3.7W : 25µH (1kHz)Insertion Loss

JBL Professional's SRX828SP active loudspeaker provides great sound and rugged durability to those who depend on portable PA systems. The SRX828SP is a dual 18" subwoofer that features powerful onboard DSP making it a great solution for main PA or monitoring applications. Ethercon connectivity provides full HiQnet network-ability so you'll have extensive system tunability to get the best sound possible out of your PA no matter where you're mixing. Never compromise sound or durability in your PA again with JBL Professional's SRX828SP active loudspeaker. Features:Purposeful Design: Rugged, Intuitive to Use, Easy to TransportJBL Premium TransducersDrivecore Amplification By CrownFull User Configurable DSPNetwork ControlJBL Engineered Application PresetsLCD Screen and Glow in the Dark Ink on Back PanelAccepts JBL WK-45 Caster KitSpecifications:System Type: Self powered dual 18”, subwoofer systemMax SPL Output: 141 dBFrequency Range (-10 dB): 29 Hz - 150 HzFrequency Response (-3 dB): 35 Hz - 120 HzAmplifier Design: Class DPower Rating: 2000 W PeakDimensions (H x W x D): 574 x 1205 x 681 (mm)Net Weight: 65.9 kg

The JBL SRX818SP 18" Self-Powered Subwoofer System is suitable for live performance, mobile and fixed DJ, sound system rental, touring, and permanent installation applications. Using JBL Premium Transducers, 1000W Peak of Crown Class-D Drivecore Amplification, and a full user configurable DSP system with HiQnet network control (via Ethercon connection to third party router) and 50 JBL engineered application presets, the system can deliver a frequency response of 35 to 150 Hz (-3 dB) and a maximum SPL of 135 dB. Features:Purposeful Design: Rugged, Intuitive to Use, Easy to TransportJBL Premium TransducersDrivecore Amplification By CrownFull User Configurable DSP18" SubwooferNetwork ControlJBL Engineered Application PresetsLCD Screen and Glow in the Dark Ink on Back PanelAccepts JBL WK-45 Caster KitM20 Threaded Pole MountSpecifications:System Type: Self powered 18”, subwoofer systemMax SPL Output: 135 dBFrequency Range (-10 dB): 29 Hz - 150 HzFrequency Response (-3 dB): 35 Hz - 120 HzAmplifier Design: Class DPower Rating: 1000 W PeakDimensions (H x W x D): 575 x 684 x 683 (mm)Net Weight: 39.5 kg

The SRX800 Series is the next generation high performance powered loudspeaker system comprising three full range and two subwoofer models with an array of features that elevate the SRX800 Series to the best in class of all competitive systems. The full range 12" two-way, SRX812P features legendary JBL Drivers, proprietary 2,000 Watt Crown amplification, Crown Front-End DriveCore Technology, premium JBL user-configurable DSP, V5 Tunings compatible with Vertec and VTX touring systems, and HiQnet Network control options via iOS and Android applications. Drawing on JBL’s long history of groundbreaking technology and loudspeaker design, the SRX800 Series meets the needs of touring houses, installations, and the most demanding live sound applications ensuring they can deploy a no-compromise, all-in-one solution featuring legendary JBL sound and performance, a wide array of configurability, and compatibility with JBL’s flagship touring systems. Features:Purposeful Design: Rugged, Intuitive to Use, Easy to TransportJBL Premium TransducersDrivecore Amplification By CrownFull User Configurable DSPNetwork ControlJBL Engineered Application PresetsLCD Screen and Glow in the Dark Ink on Back PanelM10 Suspension PointsStandard 35mm Pole CupSpecifications:System Type: Self powered 12”, two-way, bass-reflexMax SPL Output: 136 dBFrequency Range (-10 dB): 40 Hz - 21 kHzFrequency Response (-3 dB): 48 Hz - 20 kHzCoverage Pattern: 90° x 50°Amplifier Design: Class DPower Rating: 2000 W PeakDimensions (H x W x D): 638 x 415 x 429 (mm)Net Weight: 26.4 kg

The SRX800 Series is the next generation high performance powered loudspeaker system comprising three full range and two subwoofer models with an array of features that elevate the SRX800 Series to the best in class of all competitive systems. The full range 15" three-way, SRX835P features legendary JBL Drivers, proprietary 2,000 Watt Crown amplification, Crown Front-End DriveCore Technology, premium JBL user-configurable DSP, V5 Tunings compatible with Vertec and VTX touring systems, and HiQnet Network control options via iOS and Android applications. Drawing on JBL’s long history of groundbreaking technology and loudspeaker design, the SRX800 Series meets the needs of touring houses, installations, and the most demanding live sound applications ensuring they can deploy a no-compromise, all-in-one solution featuring legendary JBL sound and performance, a wide array of configurability, and compatibility with JBL’s flagship touring systems. Features:Purposeful Design: Rugged, Intuitive to Use, Easy to TransportJBL Premium TransducersDrivecore Amplification By CrownFull User Configurable DSPNetwork ControlJBL Engineered Application PresetsLCD Screen and Glow in the Dark Ink on Back PanelM10 Suspension PointsStandard 35mm Pole CupSpecifications:System Type: Self powered 15”, three-way, bass-reflexMax SPL Output: 137 dBFrequency Range (-10 dB): 33 Hz - 21 kHzFrequency Response (-3 dB): 41 Hz - 20 kHzCoverage Pattern: 60° x 40°Amplifier Design: Class DPower Rating: 2000 W PeakDimensions (H x W x D): 984 x 544 x 476 (mm)Net Weight: 38.6 kg

The SRX800 Series is the next generation high performance powered loudspeaker system comprising three full range and two subwoofer models with an array of features that elevate the SRX800 Series to the best in class of all competitive systems. The full range 15" two-way, SRX815P features legendary JBL Drivers, proprietary 2,000 Watt Crown amplification, Crown Front-End DriveCore Technology, premium JBL user-configurable DSP, V5 Tunings compatible with Vertec and VTX touring systems, and HiQnet Network control options via iOS and Android applications. Drawing on JBL’s long history of groundbreaking technology and loudspeaker design, the SRX800 Series meets the needs of touring houses, installations, and the most demanding live sound applications ensuring they can deploy a no-compromise, all-in-one solution featuring legendary JBL sound and performance, a wide array of configurability, and compatibility with JBL’s flagship touring systems. Features:Purposeful Design: Rugged, Intuitive to Use, Easy to TransportJBL Premium TransducersDrivecore Amplification By CrownFull User Configurable DSPNetwork ControlJBL Engineered Application PresetsLCD Screen and Glow in the Dark Ink on Back PanelM10 Suspension PointsStandard 35mm Pole CupSpecifications:System Type: Self powered 15”, two-way, bass-reflexMax SPL Output: 137 dBFrequency Range (-10 dB): 36 Hz - 21 kHzFrequency Response (-3 dB): 44 Hz - 20 kHzCoverage Pattern: 90° x 50°Amplifier Design: Class DPower Rating: 2000 W PeakDimensions (H x W x D): 691 x 458 x 478 (mm)Net Weight: 28.6 kg

15-inch Powered PA Speaker with Bluetooth.Launched in 1995, JBL’s best-selling EON family of PAs set the benchmark for how great a powered loudspeaker system can be.The JBL EON715 15-inch loudspeaker is part of JBL’s new EON700 Series of powered PAs, which represents a major step forward in innovation and technology by delivering truly intelligible, clearly consistent coverage at any volume level.The EON700 Series leverages the latest acoustic science, transducer designs, cabinet materials and advanced DSP and control technologies to deliver extraordinary performance in a fully professional, highly flexible, easy to use, portable system.With four models available, including the 10-inch EON710, the 12-inch EON712 and the 15-inch EON715 powered PA speakers and the 18-inch EON718S subwoofer, EON700 systems cover the needs of today’s working musicians and sound providers.

JBL JRX 212. JBL 12 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.  JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver improves high frequency performance as well as system reliability.The advanced network topology crossover design shapes frequency response and delivers "coherent summation" in the crossover region.  High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.  Progressive Transition high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.  SonicGuard protects the high frequency driver from excess power without interrupting the performance.Non-resonant, all-steel handles are used. Attractive 18-gauge hexagon perforated, steel grille protects components from damage.  Dual-angle pole-mount socket allows the speaker to tilt 10°for more uniform audience coverage. Specifications:Power Rating250 / 1,000 WFrequency RangeAt -10 dB : 60 Hz to 20 kHzFrequency ResponseAt ±3 dB : 70 Hz to 19 kHzSensitivity99 dB SPL (1 W / 1 m) (1m)Nominal Impedance8 ΩAmplifier Power250 to 500 W into 8 ΩMaximum SPL129 dBNominalDispersion: 90 x 50ºCrossover Frequency1.8 kHzHigh Frequency DriverJBL 2414H-C 1" (25 mm) polymer diaphragm compression driver mounted on Progressive Transition WaveguideLow Frequency DriverJBL M112-8Input Connectors1 x Neutrik Speakon NL-4; 0.25" (6.35 mm)1 x TS phone jack; parallelDimensions (H x W x D)23.0 x 15.7 x 12.8" (584.0 x 399.0 x 325.0 mm)Weight43.0 lb (19.5 kg)  

JBL JRX 218S. 18 in. compact subwoofer. - 350 W (continuous), 1400 W (peak) power capacity. The rugged enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for durability and improved low-frequency performance.The enclosure is covered in black carpet.  A top mounted, cast aluminum 36 mm pole mount receptacle can receive an optional SS3BK pole to facilitate use of the JRX218S as a base for a midhigh speaker cabinet.  Non-resonant, all steel handles are used.  Attractive 18-gauge perforated steel grille protects components from damage.  Specifications:Power Rating350 / 1400 WFrequency RangeAt -10 dB: 38 to 300 HzFrequency ResponseAt ±3 dB: 55 to 300 HzSensitivity96 dB SPL (1m)Nominal Impedance4ΩAmplifier Power350 to 700 W into 4ΩCrossover Adjustment30 Hz HPF, 24 dB / octave; 80 to 100 Hz LPF, 24 dB / octaveMaximum SPL127 dBLow Frequency DriverJBL 2043-GInput Connectors1 x Neutrik Speakon NL-41 x 0.25" (6.35 mm) TS phone jack; parallelDimensions (H x W x D)23.5 x 20.3 x 22.0" (605.0 x 508.0 x 551.0 mm)Weight89.0 lb (40.4 kg) 

JBL JRX 215. JBL 15 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling. - JBL 2414H-C 25 mm (1 in ) polymer diaphragm compression driver improves high frequency performance as well as system reliability.The advanced network topology crossover design shapes the frequency response to deliver coherent summation in the crossover region. - High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating. - Progressive Transition high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in ) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance. - SonicGuard? protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles are used. - Attractive 18-gauge hexagon perforated, steel grille protects components from damage. - Dual-angle pole-mount socket allows the speakers to tilt 10° for more uniform audience coverage. Specifications:Power Rating250 / 1000 WFrequency RangeAt -10 dB: 38 Hz to 19 kHzFrequency ResponseAt ±3 dB: 50 Hz to 16 kHzSensitivity98 dB SPL (1w/1m) (1m)Nominal Impedance8ΩAmplifier Power250 to 500 W into 8ΩMaximum SPL128 dBNominalDispersion: 90 x 50ºCrossover Frequency1.6 kHzHigh Frequency DriverJBL 2414H-C 1" (25 mm) polymer diaphragm compression driver mounted on Progressive Transition WaveguideLow Frequency DriverJBL M115-8AInput Connectors1 x Neutrik Speakon NL-41 x 0.25" (6.35 mm) TS phone jack; parallelDimensions (H x W x D)27.5 x 18.1 x 17.0 (699.0 x 460.0 x 432.0 mm)Weight60.5 lb (27.4 kg) 

JBL JRX 225. Dual JBL low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more crosssectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.  JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver improves high frequency performance as well as system reliability.Attractive 18-gauge hexagon perforated, steel grille protects components from damage. The advanced network topology crossover design shapes frequency response and delivers coherent summation in the crossover region. - High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.  Progressive Transition? high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance. - SonicGuard? protects the highfrequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles are used.Specifications:Power Rating500 / 2,000 WFrequency RangeAt -10 dB : 36 Hz to 19 kHzFrequency ResponseAt ±3 dB : 45 Hz to 16 kHzSensitivity100 dB SPL (1 W / 1 m) (1m)Nominal Impedance4 ΩAmplifier Power500 to 1000 W into 4 ΩMaximum SPL133 dBNominalDispersion: 90 x 50ºCrossover Frequency2 kHzHigh Frequency DriverJBL 2414H-C 1" (25 mm) polymer diaphragm compression driver mounted on Progressive Transition WaveguideLow Frequency Driver2 x JBL M128Input Connectors1 x Neutrik Speakon NL-4; 0.25" (6.35 mm)1 x TS phone jack; parallelDimensions (H x W x D)43.0 x 18.3 x 16.8" (1,092.0 x 464.0 x 426.0 mm)Weight94 lb (42.6 kg) 

Legendary JBL Professional performance housed in a compact form-factor. The Control 1 Pro features a professional crossover network coupled with professional drivers making it ideal for even the most demanding near-field audio applications. The Control 1 Pro's updated crossover network design provides steeper crossover slopes for exceptional sonic performance and improved consistency throughout the listening area. The included wall- mount bracket enables the unit to be secured against a wall or other flat surface. Moreover, the rugged molded enclosure houses magnetically shielded transducers, making the Control 1 Pro well-suited for use with video and computer monitors, or other magnetically sensitive equipment. Features150 Watts Continuous Power HandlingProfessional Drivers and Crossover NetworkIncluded Mounting BracketTransparent and Faithful Sonic PerformanceMagnetically Shielded TransducersSonicGuard™ Overload ProtectionAvailable in Black or White Finishes SpecificationsFrequency Range (-10 dB) 80 Hz to 20 kHzFrequency Response (± 3 dB) I00 Hz - 18 kHzPower Capacity I50 WSensitivity 87 dB SPL, 1 W, 1 m (3.3 ft)Maximum SPL 108 dB continuous, 114 dB peakDirectivity Factor (Q) 6.0Directivity Index (DI) 7.8Nominal Impedance 4 ohmsCrossover Frequency 4.2 kHzFull-range SonicGuard™ power limiting to protect network and transducersLF Drivers 135 mm (5.25 in) low frequency loudspeakerHF Drivers 19 mm (.75 in) polycarbonate dome tweeterInput Connectors Spring-loaded terminalsPolypropylene Structural FoamDimensions 235 mm x 159 mm x 143 mm (9.3 in x 6.3 in x 5.6 in)Net Weight (each) 1.8 kg (4 lb)Shipping Weight (pair) 4.6 kg (10 lb)Included Accessories: Mounting Bracket AssemblyOptional Accessories: MTC-1A ultra-duty mount bracket MTC-8 heavy-dutymounting bracket The price is for 1 speaker.Mounting Bracket Included. Priced as each, Sold in Pairs.

PRX418S is an eighteen inch subwoofer which, when combined with the two-way models, provides a sub/sat system capable of generating 135 dB of full-range, high quality audio. Features : Tough DuraFlexT finish enclosure Heavy Duty 16 gauge protective screen backed steel grille.Specifications:Handles 800W Continuous / 1,600W Program3,200W Peak Handling8Ω Nominal Impedance80Hz Low-Pass Crossover35Hz Hi-Pass FilterSpeakon NL-2 and 1/4" Combo InputsDurable Design Protects WooferPole Mount Cup for Full-Range Speaker

The PRX425 Two-Way Dual 15" Passive Speaker by JBL is a powerful option for touring or installed FOH mains. The PRX425 houses dual 15" woofers and a 1" polymer diaphragm compression driver for 600W of continuous power capacity. The compression driver is mounted to a 90 x 50° horn, providing even coverage. The 90° coverage angle is wide enough to provide coverage of an audience when used one-per-side, yet narrow enough to allow splaying of multiple enclosures without excessive coverage overlap. The PRX425 features combo connectors that accept both Speakon NL-2 and 1/4" TS connectors. A passive crossover network provides accurate sound reproduction. The enclosure is constructed of birch/poplar multi-laminate hardwood and coated in JBL's rugged DuraFlex finish. The distinctive 16-gauge steel grille is CNC-machined for precision. The grilles are internally lined with an acoustically transparent screen to provide additional driver protection and give a professional appearance. The PRX425 has twelve M10 suspension points, allowing it to be elevated above the audience.Specifications:Active or PassivePassiveFrequency Range48 Hz to 19 kHz (-10 db)Frequency Response61 Hz to 16 kHz ±3 dBCoverage Pattern90 x 50 °Crossover TypePassiveCrossover Frequency2.2 kHzPower Handling600W continuous1,200W program2,400W peakMaximum SPL128 dB SPL continuous, 134 dB SPL peakSensitivity100 dB SPL (1W  1 m)Low Frequency DriverDual 15" (380 mm) JBL MB115-8A woofersHigh Frequency Driver1" (25 mm) JBL 2414H-C polymer diaphragm compression driverNominal Impedance4ΩEnclosureTrapezoidal 0.71" (18 mm) birch/poplar plywoodMounting OptionsTwelve M10 Suspension PointsHandle or Carrying TypeTwo glass-filled handle with rubber gripFinishBlack DuraFlex finishGrillePowder coated, black, 16-gauge perforated steel with acoustically transparent black screen backingInput Connectors2 x Neutrik Speakon NL-2 and 1/4" combo jacks in parallelDimensions (H x W x D)41.1 x 16.9 x 20.5" (1,044 x 429 x 521 mm)Weight74 lb (33.5 kg) 

PRX415M is a portable, fifteen-inch, two-way speaker system designed for either main sound reinforcement or monitoring applications. Features : 90° x 50° coverage Dual-angle pole socket for applications requiring tripod mounting Heavy Duty 16 gauge protective screen backed steel grille Tough DuraFlex enclosure finish SonicGuard protects the highfrequency driver from excess power without interrupting the performance. Specifications:Handles 300W Continuous / 600W Program1,200W Peak Handling8Ω Nominal Impedance90 x 50° Sound CoveragePassive Crossover NetworkSpeakon NL-2 and 1/4" Combo InputsPole and M10 Suspension Mounting OptionsDurable Enclosure Design

The PRX412M Two-Way 12" Passive Speaker by JBL has an asymmetrical enclosure shape, allowing it to be used as an FOH main or a wedge monitor. The PRX412M houses a 12" woofer and a 1" polymer diaphragm compression driver for 300W of continuous power capacity. The 90 x 50° horn provides smooth, even coverage in both vertical and horizontal orientations.The PRX412M features combo connectors that accept both Speakon NL-2 and 1/4" TS connectors. A passive crossover network provides accurate sound reproduction. For use on a tripod or over a subwoofer, JBL's dual angle pole mount socket is integrated into the cabinet design. The socket can tilt down by 10°, allowing a mounted speaker to still obtain optimum audience coverage.The enclosure is constructed of birch/poplar multi-laminate hardwood and coated in JBL's rugged DuraFlex finish. The distinctive 16-gauge steel grille is CNC-machined for precision. The grilles are internally lined with an acoustically transparent screen to provide additional driver protection and give a professional appearance.Specifications:Active or PassivePassiveFrequency Range50 Hz to 20 kHz (-10 db)Frequency Response62 Hz to 19 kHz ±3 dBCoverage Pattern90 x 50 °Crossover TypePassiveCrossover Frequency2.0 kHzPower Handling300W continuous600W program1,200W peakMaximum SPL120 dB SPL continuous, 126 dB SPL peakSensitivity95 dB SPL (1W  1 m)Low Frequency Driver12" (305 mm) JBL MB112-8 wooferHigh Frequency Driver1" (25 mm) JBL 2414H-C polymer diaphragm compression driverNominal Impedance8ΩEnclosureAsymmetrical stage monitor0.71" (18 mm) birch/poplar plywoodMounting OptionsDual angle, 0° or -10° 35 mm pole socketTwelve M10 Suspension PointsHandle or Carrying TypeGlass-filled handle with rubber gripFinishBlack DuraFlex finishGrillePowder coated, black, 16-gauge perforated steel with acoustically transparent black screen backingInput ConnectorsParallel Neutrik Speakon NL-2 and 1/4" combo jacksDimensions (H x W x D)22.6 x 13.9 x 15.7" (574 x 353 x 399 mm)Weight35 lb (16 kg) 

JBL Control 62P.  Ideal for visually sensitive applications, Control 62 P’s 2" driver is great for speech and mid-high music applications (external high-pass required). For full-range, wide bandwidth performance, up to 4 pieces can be driven from a Control 50 S / T or 40 CS / T subwoofer.

JBL Control 62P White. Ideal for visually sensitive applications, Control 62 P’s 2" driver is great for speech and mid-high music applications (external high-pass required). For full-range, wide bandwidth performance, up to 4 pieces can be driven from a Control 50 S / T or 40 CS / T subwoofer.

The CSS8004 from JBL is a professional-quality 4" in-ceiling speaker that provides full, clear audio in an unobtrusive design. The speaker has a wide 175° coverage pattern to reach a large area. It also has a 5W multi-tap transformer that supports 25, 70, and 100V distributed lines for connecting to virtually any pro sound system.Specifications:Driver4" (102mm)Sensitivity90dBTransformer5W with 25/70/100V TapsCoverage175° 

The CSS8008 from JBL is a professional-quality 8" in-ceiling speaker that provides full, clear audio in an unobtrusive design. The speaker has a 120° conical coverage pattern to provide excellent clarity and intelligibility. It also has a 5W multi-tap transformer that supports 25, 70, and 100V distributed lines for connecting to virtually any pro sound system.Specifications:Driver8" (203mm)Sensitivity96dBTransformer5W with 25/70/100V TapsCoverage120° Conical 

The CSS8018 from JBL is a high-output 8" in-ceiling speaker that provides full, clear audio in an unobtrusive design. The speaker has a 10W multi-tap transformer that supports 25, 70, and 100V distributed lines for connecting to virtually any pro sound system.Specifications:Driver8" (203mm)Sensitivity97dBTransformer10W with 25/70/100V TapsCoverageNot Specified by Manufacturer 

The Control 52 from JBL is a stylish installation loudspeaker that produces high-quality audio from a compact enclosure. The speaker is ideal for use with the C50 subwoofer, and can be set up with 2 or 4 speakers per system. The loudspeaker can also be mixed and matched with Contractor 40 series ceiling speakers.The speaker has a 2.5" driver with an efficient magnet structure, as well as a rubber half roll surround for enhanced bass performance. The copper-clad aluminum wire voice coil is on a vented Nomex former to provide high fidelity and reliability, while the copper-capped pole piece provides consistent impedance and extended HF response. The speaker can work with 70/100V distributed lines and low impedance systems for terrific versatility, and the included wall mounting bracket lets you angle the speaker up to 45° off-axis.Stylish and compact enclosureIdeal for use with the C50 subwoofer, and can be set up with 2 or 4 speakers per systemCan be mixed and matched with Contractor 40 series ceiling speakers2.5" driver with an efficient magnet structure, as well as a rubber half roll surround for enhanced bass performanceCopper-clad aluminum wire voice coil is on a vented Nomex former to provide high fidelity and reliabilityCopper-capped pole piece provides consistent impedance and extended HF responseWorks with 70/100V distributed lines and low impedance systems for terrific versatilityIncluded wall mounting bracket lets you angle the speaker up to 45° off-axisSpecifications:Driver2.5" (60mm) Polypropylene Cone with Butyl Rubber Surround, Copper-Clad Aluminum Voice Coil, and Vented Nomex FormerFrequency Response140Hz - 20kHz (-10dB)Power Capacity50W Continuous Program Power (2 Hours)25W Continuous Pink Noise (2 Hours)30W Continuous Program Power (100 Hours)15W Continuous Pink Noise (100 Hours)Sensitivity85dB (4.0V/1 m = 1W)82dB (2.83V, 1 m)SPL94dB, Average100dB PeakConnectorsRemovable Locking 2-pin Connector with Screw-Down TerminalsEnclosureHigh-Impact PolystyrenePainted Zinc-Plated Metal GrilleDimensions (HxWxD)4.5 x 3.3 x 3.75" (115 x 84 x 96mm)Weight1.5 lbs (0.7kg) 

The AM7215/64 is a high power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap 2265H 380 mm (15 in) low-frequency driver and 2432H high-frequency 38 mm (1.5 in) exit, 75 mm (3 in) voice-coil compression driver.The large format Progressive Transition waveguide provides excellent 60° x 40° coverage. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability.Features : 60° x 40° Coverage 2265H Differential Drive Low- Frequency Driver 2432H High-Frequency Compression Driver Large PT Progressive Transition waveguide for excellent pattern control and low distortion Rotatable waveguide for vertical or horizontal orientation Bi-Amp/Passive Switchable.

The 8138 is an 8" ceiling speaker designed for use with a pre-install inceiling backcan, resulting in highfidelity performance at a costeffective price point. The 8138 is ideal for a wide variety of commercial sound applications from restaurant and retail to professional offices and reception areas.

The stylish Control 52 satellite loudspeaker produces superb high fidelity sound via a lowdistortion 60 mm (2.5 in) driver, which features a secondary bucking magnet for high efficiency, rubber half roll surround for enhanced bass performance, 19 mm (0.75 in) copper clad aluminum wire voice coil on a vented Nomex, former for high fidelity and reliability, and a copper-capped pole piece for more consistent impedance and extended high frequency response. The wall bracket allows each speaker to be angled up to 45° off-axis. Specifications:Driver2.5" (60mm) Polypropylene Cone with Butyl Rubber Surround, Copper-Clad Aluminum Voice Coil, and Vented Nomex FormerFrequency Response140Hz - 20kHz (-10dB)Power Capacity50W Continuous Program Power (2 Hours)25W Continuous Pink Noise (2 Hours)30W Continuous Program Power (100 Hours)15W Continuous Pink Noise (100 Hours)Sensitivity85dB (4.0V/1 m = 1W)82dB (2.83V, 1 m)SPL94dB, Average100dB PeakConnectorsRemovable Locking 2-pin Connector with Screw-Down TerminalsEnclosureHigh-Impact PolystyrenePainted Zinc-Plated Metal GrilleDimensions (HxWxD)4.5 x 3.3 x 3.75" (115 x 84 x 96mm)Weight1.5 lbs (0.7kg) 

JBL Control 40CS/T-PL. Direct-Radiating In-Ceiling Subwoofer with long-throw 8 driver, 30 Hz - 280 Hz, 200W program 100W pink noise, 70V/100V taps at 60W, 30W 15W (and 7.5W  70V) plus 8 bypass. Built-in crossover network with outputs for 2 or 4 Control 42C satellite speakers.

The 8124 is a 4-inch, full-range, cost-effective loudspeaker for commercial applications. The 8124 features high-fidelity performance in an easy to install package. The system’s high sensitivity drivers deliver maximum sound levels using minimal amplifier power. Features:Clear, High-Fidelity PerformanceDog-ears for easy Blind Mount InstallationsHigh Sensitivity (93 dB, 1W, 1m) for Maximum Power Efficiency6W Transformer for use of 70V / 100V Distributed LinesSpecifications:Component: 4 in (100 mm), Full-range DriverFrequency Range: 60 Hz – 18 kHzSensitivity: 93 dB (1 kHz – 8 kHz), 1W, 1MCoverage: 130° conical70V/100V Taps: 6W, 3W, 1.5W (0.75W at 70V only)Termination: Bare wiresDimensions (Diameter x Depth): 8.1 in (206mm) x 3.5 in (89mm)Weight: 2.5lb (1.2kg)Included Accessories: Sculpted GrilleOptional Accessories: MTC-8124C C-ring, MTC- Rail tile rails

The 8128 is a 8-inch, full-range, cost-effective loudspeaker for commercial applications. The 8128 features high-fidelity performance in an easy to install package. The system’s high sensitivity drivers deliver maximum sound levels using minimal amplifier power.

JBL AC 26. Compact 2-Way Loudspeaker with 2 x 6.5" LF. 90° x 90° Coverage, Passive. Compact PT Progressive Transition Waveguide. Suspension Eyebolts Not Included. Optional U-Bracket Model MTU-26. Specifications:Active or PassivePassiveFrequency Response55Hz-20KHzPower Capacity300W Cont. Pink Noise600W Program1200W PeakMaximum Sound Pressure Level (SPL)Not specified by the manufacturerNominal SensitivityNot specified by the manufacturerImpedance8 OhmsCrossoverNot specified by the manufacturerLow Frequency Driver6.5" x 2High Frequency Driver1" Dome TweeterEnclosure MaterialMulti-Ply HardwoodInput ConnectionsDual Neutrik NL4 connectors plus screw terminalDimensions21.3 x 7.8 x 8.9" (539.8 x 199.4 x 226.1mm)Weight24.3 lbs (11kg) 

JBL AC 28/26. Compact 2-Way Loudspeaker with 2 x 8" LF. 120° x 60° Coverage, Passive. Compact PT Progressive Transition Waveguide, Rotatable. Suspension Eyebolts Not Included. Optional U-Bracket Model MTU-28. Specifications:Active or PassivePassiveFrequency Response47Hz-20KHzPower Capacity375W Cont. Pink Noise750W Program1500W PeakMaximum Sound Pressure Level (SPL)Not specified by the manufacturerNominal SensitivityNot specified by the manufacturerImpedance8 OhmsCrossoverNot specified by the manufacturerLow Frequency Driver8" x 2High Frequency Driver1" Dome TweeterEnclosure MaterialMulti-Ply HardwoodInput ConnectionsDual Neutrik NL4 connectors plus screw terminalDimensions26.8 x 9.4 x 10" (679.5 x 237.5 x 254mm)Weight40.9 lbs (18.6kg) 

JBL AC 28/95. Compact 2-Way Loudspeaker with 2 x 8" LF. 90° x 50° Coverage, Passive. Compact PT Progressive Transition Waveguide, Rotatable. Suspension Eyebolts Not Included. Optional U-Bracket Model MTU-28. Specifications:Active or PassivePassiveFrequency Response47Hz-20KHzPower Capacity375W Cont. Pink Noise750W Program1500W PeakMaximum Sound Pressure Level (SPL)Not specified by the manufacturerNominal SensitivityNot specified by the manufacturerImpedance8 OhmsCrossoverNot specified by the manufacturerLow Frequency Driver8" x 2High Frequency Driver1" Dome TweeterEnclosure MaterialMulti-Ply HardwoodInput ConnectionsDual Neutrik NL4 connectors plus screw terminalDimensions26.8 x 9.4 x 10" (679.5 x 237.5 x 254mm)Weight40.9 lbs (18.6kg) 

JBL AC 18/95. Compact 2-Way Loudspeaker with 1 x 8" LF. 90° x 50° Coverage, Passive. Compact PT Progressive Transition Waveguide, Rotatable. Suspension Eyebolts Not Included. Optional U-Bracket Model MTU-18. Specifications:Active or PassivePassiveFrequency Response47Hz-20KHzPower Capacity250W Cont. Pink Noise500W Program1000W PeakMaximum Sound Pressure Level (SPL)Not specified by the manufacturerNominal SensitivityNot specified by the manufacturerImpedance8 OhmsCrossoverNot specified by the manufacturerLow Frequency Driver8"High Frequency Driver1" Dome TweeterEnclosure MaterialMulti-Ply HardwoodInput ConnectionsDual Neutrik NL4 connectors plus screw terminalDimensions18.5 x 9.4 x 10" (470 x 237.5 x 254mm)Weight28.2 lbs (12.8kg) 

JBL AC 25. Ultra-Compact 2-Way Loudspeaker with 2 x 5.25" LF. 90° x 90° Coverage, Passive. Suspension Eyebolts Not Included. Optional U-Bracket Model MTU-25. Specifications:Active or PassivePassiveFrequency Response80Hz-20KHzPower Capacity225W Cont. Pink Noise450W Program900W PeakMaximum Sound Pressure Level (SPL)Not specified by the manufacturerNominal SensitivityNot specified by the manufacturerImpedance16 OhmsCrossoverNot specified by the manufacturerLow Frequency Driver5.25" x 2High Frequency Driver1" Dome TweeterEnclosure MaterialMulti-Ply HardwoodInput ConnectionsDual Neutrik NL4 connectors plus screw terminalDimensions14.9 x 5.9 x 7" (377.8 x 150.3 x 177.8mm)Weight16.5 lbs (7.5kg) 

The black AC15  from JBL is a pair of 2-way loudspeakers with 5.25" LF drivers. These speakers have broad dispersion angles, making them easy to set up appropriately in performing arts facilities, auditoriums, houses of worship, clubs, and entertainment venues. The speakers can each handle up to 300W of program power and have 90 x 90° bandwidth. Each speaker has dual Neutrik NL4 connectors plus screw terminals, making them simple to add to your system. The AC15 B has attachment points for the optional U-bracket. Ultra-Compact 2-Way Loudspeaker with 1 x 5.25" LF. 90° x 90° Coverage, Passive. Suspension Eyebolts Not Included. Optional U-Bracket Model MTU-15. Specifications:NoteThe following specs are per speakerActive or PassivePassiveFrequency Response80Hz-20KHzPower Capacity150W Cont. Pink Noise300W Program600W PeakMaximum Sound Pressure Level (SPL)Not specified by the manufacturerNominal SensitivityNot specified by the manufacturerImpedance16ΩCrossoverNot specified by the manufacturerLow Frequency Driver5.25"High Frequency Driver1" Dome TweeterEnclosure MaterialMulti-Ply HardwoodInput ConnectionsDual Neutrik NL4 connectors plus screw terminalDimensions9.5 x 5.9 x 7" (241.3 x 150.3 x 177.8 mm)Weight10.5 lb (4.7 kg) 

The AC16 B  from JBL is a 2-Way loudspeaker with a 6.5" LF driver. These speakers have broad dispersion angles making them easy to set up appropriately in performing arts facilities, theatrical sound design, auditoriums, houses of worship, clubs, and themed entertainment venues. This speaker can handle up to 400W of program power and has 90x90° bandwidth. Dual Neutrik NL4 connectors plus screw terminals make it simple to add this speaker to your system. The AC16 B has attachment points for the optional U-bracket or OmniMount. Ultra-Compact 2-Way Loudspeaker with 1 x 6.5" LF. 90° x 90° Coverage, Passive. Compact PT Progressive Transition Waveguide. Suspension Eyebolts Not Included. Optional U-Bracket Model MTU-16. 90x90° coverageHandles up to 400W program powerSpecifications:Active or PassivePassiveFrequency Response55Hz-20KHzPower Capacity200W Cont. Pink Noise400W Program800W PeakMaximum Sound Pressure Level (SPL)Not specified by the manufacturerNominal SensitivityNot specified by the manufacturerImpedance16 OhmsCrossoverNot specified by the manufacturerLow Frequency Driver6.5"High Frequency Driver1" Dome TweeterEnclosure MaterialMulti-Ply HardwoodInput ConnectionsDual Neutrik NL4 connectors plus screw terminalDimensions15 x 7.8 x 8.9" (381 x 199.4 x 226.1mm)Weight15.8 lbs (7.2kg) 

JBL VRX 918SP. Powered 18 flying subwoofer, 2268H Differential Drive LF, Crown DPC-2 amplifier module with system DSP; integral rigging hardware compatible with VRX932LAP; top mounted M20 threaded pole socket  black DuraFlex finish. Specifications:Driver1 x JBL 2268H 18" 457 mm (18 in) Differential Drive wooferCrossover80 or 120Hz selectableFrequency Range31-220HzImpedance2 x 2 OhmsPower Output1500W Peak LF: Dual-Bridged Technology Class DMaximum Sound Pressure Level (SPL)126dBConnectorsXLR with loop throughControlsInput Attenuator (0-16 dB)Selectable 80 Hz or 120 Hz Low Pass80 Hz High-Pass enable/disable for XLR loop thruEnclosure Material18mm, 13ply Baltic Birch plywoodDimensions20 x 23.5 x 29.5" (508 x 297 x 749mm)Weight85 lbs (38.5kg) 

JBL VRX 932LAP. Powered 12" two-way line-array system with 1 x 2262H Differential Drive LF, 3 x 2408J HF on Constant Curvature waveguide Crown DPC-2 amplifier module with system DSP; dual angle pole socket and integral rigging hardware black DuraFlex finish. Specifications:Active or PassiveActiveFrequency Response75 Hz - 20 kHzPower Capacity1750W Peak, 875 ContinuousMaximum Sound Pressure Level (SPL)136 dBNominal SensitivityNot Specified by ManufacturerImpedanceLF: 2 x 2 ohmsHF: 4 ohmsCrossoverNot Specified by ManufacturerLow Frequency DriverJBL 2262FF 12" Dual Voice CoilHigh Frequency Driver3 x JBL 2408J 1.5" Voice Coil Neodymium Compression DriverEnclosure MaterialBirch Plywood with Black DuraFlex FinishInput ConnectionsNeutrik PowerConDimensions13.75 x 23.5 x 17.5" (34.9 x 59.7 x 44.4 cm)Weight52 lbs (24 kg)