Focal

In order to feed your amplifiers with an appropriate and qualitative audio signal, keeping your original head-units and the associated OEM controls, you can choose the converter HILO.V2.HILO.V2 converts a stereo amplified signal in two low-level line outputs, eliminates parasitic interferences and generates separated grounds. You can now use an amplifier very simply, without any interference. It is now very easy to create a quality hi-fi install in your car. Entirely developed by Focal, HILO is now available under generation 2. It is 100% rethought to match any OEM head-unit thanks to its DC and AC voltage detection, and providing a full compatibility with FPX range.Features:Converts a stereo amplified signal in two low-level line outputs for an amplifier.Eliminates parasitic interferences - separated groundsSelectable DC and AC voltages detection – full compatibility with any original manufacturer head-units.Automatically generates a remote control signal to activate the associated amplifierCan be used in passive mode without 12V power supply (In that case the remote output doesn’t work) 

The two-way coaxial speaker drivers kit IC 690TOY is designed with elliptical suited for the front or rear factory locations in Toyota® vehicles. The IC 690TOY has been designed respecting the factory acoustic of the brand’s vehicles and allows thus to benefit from an optimal musicality in a few steps only. Forget the factory sound of your car, discover the neutral and precise Focal sound on the road and 100% « Plug & Play »..Features:Easy installationRespect of the original TOYOTA® connectorsBetter precision in high frequenciesCompact tweeter for better adaptation in factory locationHigh density rubber ring for acoustic sealing with the door panelSpecifications:Woofer : 6x9" (165x230mm)Diamètre bobine : 13/16" (30mm)Moteur : 31/3" (85mm)Aluminum inverted dome compact tweeterMax. power: 150 WattsNominal power: 75 Watts RMSSensitivity (2.83V/1m): 92dBImpedance: 4 OhmsFrequency response: 50Hz - 20kHz

The car audio kit ES 165 K is composed of two 6,5" (165 mm) woofers and two 025/32" (20mm) TKM tweeters. This is a compact solution that’s easy to install. The K2 Power Kevlar® cones used for the speaker drivers of the ES 165 K component kit deliver extremely dynamic sound and perfect definition. These cones endowed with all the ideal qualities, lightness, rigidity and excellent damping, have also been given the new TMD suspension. Initially developed for Sopra high-fidelity loudspeakers, the exclusive design of the suspension removes unwanted resonances and reduces the effects of distortion.The two TKM inverted dome tweeters are composed of aramid fibres. Their exclusive “M”-shaped profile is designed to control deformation of the dome, and to perfectly reproduce high frequencies up to 22 kHz smoothly and with precision. Their compact crossovers are quick to install and easy to set up. Various accessories are supplied for assembling the tweeters, which can be installed in the factory locations, on tilting frames or flush-mounted.The kit is supplied with aluminum and mesh grillesFeatures:Inverted dome "M"-shaped tweeterTweeter easy to install (supplied with accessories)11/4" (32mm) VC diameter for higher performanceSpecifications:2-way component kitDiameter: 6½" (165mm)Voice coil diameter: 11/4" (32mm)Voice coil height: 09/16"(15mm)Motor: MagnetTweeter: TKM ("M" profile aramid fiber inverted dome)Cone: Composite K2 Power "W" sandwich coneSurround: Tuned Mass Damper (TMD®)Separated crossover: 6-12/12dB (3kHz)Tweeter Adjustable level: +3; 0; -3dB/octMax. power: 200WNom.power: 100W RMSSensitivity (2.83V/1m): 90.8dBFrequency response: 60Hz- 22kHzImpedance: 4 ΩAccessories: Supplied grilles 

The ES 165 KX2 component kit is composed of two 6½" (165 mm) woofers with Kevlar® cones providing an extremely rich and punchy sound. The centre of the cone is equipped with a phase plug for improved sound dispersion around the vehicle.The two 'M'-shaped aramid-fibre TKMX inverted dome tweeters are equipped with bi-amplified crossovers. This enables perfect control over the high end for providing very smooth treble with perfect definition.Thanks to its excellent power handling, this kit is the reference product of the K2 Power range. It even won over the hearts of the experts when it was officially revealed at the CES in Las Vegas, and received the CES Innovation 2016 award.The kit is supplied with aluminium and mesh grilles.Features:Inverted dome "M"-shaped tweeter19/16" (40mm) VC diameterHigh power handlingBi-Amp crossoverPhase plug for better dispersionAluminum and mesh grilleSpecifications:​​2-way component kitDiameter: 6½" (165mm)Voice coil diameter: 19/1" (40mm)Voice coil height: 02/3" (16.5mm)Motor: MagnetTweeter: TKMX ("M" profile aramid fiberinverted dome)Cone: Composite K2 Power "W" sandwich coneSurround: Tuned Mass Damper (TMD®)Separated crossover: 6-12/12-18dB (3kHz)Tweeter Adjustable level: +3; 0; -3dB/octMax. power: 240WNom. power: 120W RMSSensitivity (2.83V/1m): 92.5dBFrequency response: 55Hz- 22kHzImpedance: 2 ΩAccessories: Supplied grilles​ 

The ES 165 KX3 is a very complete kit offering remarkably extensive frequency response (45 Hz - 22 kHz). Its main advantages are the excellent power handling and the very realistic soundstage.Composed of two 6½" (165 mm) woofers and two 3" (80 mm) mid-range speaker drivers with Kevlar® cones, it offers a very rich and dynamic mid-range and very low frequency response (45 Hz). The two bi-amped 'M'-shaped tweeters guarantee a precise high end with perfect definition.This kit is composed with two 6,5” woofers and two 3” speakers. The ES 165 KX3 is supplied with aluminum and mesh grilles.Features:Inverted dome "M"-shaped tweeterBi-Amp crossoverHigh power handling3" compact medium sizeAluminum and mesh grilleSafe impedanceSpecifications:Diameter: 6½" (165mm)Voice coil diameter: 19/16"(40mm)Voice coil height: 02/3"(16.5mm)Motor: MagnetTweeter: TKMX ("M" profile aramid fiberinverted dome)Cone: Composite K2 Power "W" sandwich coneSurround: Tuned Mass Damper (TMD®)Separated crossover: 6-12/12/12dB(3/4/500Hz/3.5kHz)Tweeter Adjustable level: +3; 0; -3dB/octMax.power: 240WNom.power: 120W RMSSensitivity (2.83V/1m): 93dBFrequency response: 45Hz- 22kHzImpedance: 4 Ω

The 165W-RC car audio kit is packed with Focal’s renowned technologies. The 2 Ohm voice coil is only 1/2 inch in diameter (12mm) and 13/8 inches high (35mm) to ensure low distortion and improved sensitivity. The ‘W’ sandwich cone and the beryllium tweeter provide extraordinary rigidity.Specifications:Tweeter: TB 872, Pure Beryllium inverted domeChassis: Coated ZAMAKCrossover: 12-18 dB/octave 2-WayMax power: 160WNominal power: 80WSensitivity: 93 dBFrequency response: 60 Hz – 30 kHz

Unbelievable musicality, a beautiful design and easy to install, Scala Utopia Evo has retained all the qualities of the previous version which has been unanimously acclaimed by the most discerning audiophiles world wide.The Scala Εωο takes you closer to the music with enhanced emotion and listening pleasure.

The legend is growing…  Undisputed musicality Unbelievable musicality, a beautiful design and easy to install, Scala Utopia Evo has retained all the qualities of the previous version which has been unanimously acclaimed by the most discerning audiophiles world wide.The Scala V2 takes you closer to the music with enhanced emotion and listening pleasure. Evo stands for evolution... Since 2008, when Utopia III was launched, Focal’s technological heritage has grown enormously. Therefore it was essential to integrate the most recent innovations into this exceptional collection.The sound architecture of Utopia III has been preserved, with the constant intention of reducing harmonic distortion in the fragile mid-range register, which is so very crucial for revealing the artist’s emotions. The two loudspeakers are equipped with Focal’s latest innovations, the NIC (Neutral Inductance Circuit) and the TMD (Tuned Mass Damping) suspension. The three-way floor standing loudspeaker Scala Utopia Evo now offers bi‑amplification, just like Grande Utopia EM and Stella. Discerning music lovers will be able to fine-tune the type of sound, depending on the timbre and the power they’re looking to achieve. The best components from their generation have also found their way into the Utopia III Evo line: cables made in France, denser acoustic materials inside the subwoofer, double terminal boards and separate crossovers. New finishes with distinctive colour-ways offer many options for today’s contemporary spaces. The 2017 edition of Utopia III Evo is an iconic line. They integrate a whole range of innovations and essential detailing, making them completely unique. They are still way ahead of any other line.                                    

Give your head unit a breath of fresh air. Head unit amplifiers (whether OEM or aftermarket) soon reveal their limits in terms of power and dynamics. At high volume, they soon saturate and ruin the listening pleasure. To compensate for this and to enable you to get the best out of your speaker drivers, Impulse 4.320 is the ideal solution. It will give your installation a boost without you having to embark on a difficult installation process. Semi “Plug&Play”, Impulse 4.320 is a miniature 4-channel digital amplifier delivering 4 x 55 Watts. Impulse 4.320 is the perfect complement for your Focal Integration speaker drivers.Features:Ultra-compact – Easy to installCompatible with all head units (OEM and after-market)Automatic start-up with your original head unitISO compatible via cable accessories sold separatelySpecifications:CEA power (4 Ohms): 4x55WrmsPower max (2 Ohms): 4x80WrmsPower bridged (4 Ohms): 2x160WrmsBandwidth: 10Hz / 20KHzMinimum THD: 0.02%SNR: 80dBAWeight: 1.2lbsDimensions: 67/8x25/8x17/8" (175x66.5x47mm) 

Kanta Center is the perfect way to complete a multichannel system from the line. It provides the exact same level of performance, whether at low or very high volume. It is therefore an excellent addition when combined with Kanta N°1 floor standing loudspeakers or the bookshelf loudspeaker, whatever the front and back configuration. The extreme definition of the higher mid-range register and its tonal balance make this a formidable weapon in any Home Cinema set-up. Film fans will be surprised by the sound clarity and speech intelligibility, which are far superior to the norm. The remarkable neutrality lends itself to thrilling emotion for an unparalleled Home Cinema experience. The Sub 1000F subwoofer is the complementary solution to make an ultra high level Home Cinema configuration. And, when it is then linked with the 300 ICW 4 in-ceiling loudspeakers, even the most exacting film fans will enjoy an incredible 3D audio experience in Dolby Atmos, DTS X or Auro-3D.Optional stand available for optimal integration under the screen.For the very first time, a Flax sandwich cone speaker has been combined with a Beryllium tweeter. Flax is the answer to the low mass/rigidity/damping equation, leading to sound clarity and precision.  This unique Flax/Beryllium combination gives music incredible warmth and musicality. Made in France, this patented flax membrane has already proven itself in Focal home and in-car speakers. The midrange speaker uses TDM Tuned Mass Damping) suspension, and every Kanta speaker is also equipped with an NIC (Neutral Inductance Circuit) driver, which stabilises the magnetic field for perfectly defined sound and better controlled bass. Everything is designed and made to create acoustic softness and warmth: the density and stiffness of the baffle and shell materials, softened angles and double vents. The baffle is made of a new material to suit the acoustic parameters. It is moulded in one piece from high density polymer (HDP). This material has excellent performance: it is 70% denser than MDF, 15% stiffer and provides 25% more damping. The one-piece baffle totally eliminates any sound diffraction. Kanta incorporates Power Flow technology with two vents, on the front and rear faces, to limit bass compression.Focal's research is geared towards reducing distortion in every register. With Kanta, the treble register is reproduced by a new pure Beryllium tweeter. This IAL3 tweeter combines the principles of IAL (Infinite Acoustic Loading) and IHL (Infinite Horn Loading) tweeters, both of which help with the absorption of waves, thus lowering the tweeter frequency. Our engineers have revisited their choice of ‘Focus Time’, which corrects speaker alignment, making them the same distance from the ear.The rear shell is made in one-piece integrally moulded wood. The Zamac base also brings out masses of character. With its spikes and cups, the base provides great stability from a very small footprint. Final details: the glass-covered top and magnetic grille fixings. When these are removed, they reveal the speakers' flax cones, the final design touch that gives Kanta its unique look.A wide range of combinations are available to fit into every interior space.The back cover is available in High Gloss black lacquer and Walnut veneer. For each of these there are four baffle colours, in two finishes.With the High Gloss black shell there are four baffles available: High Gloss Carrara White, Gauloise Blue,Solar Yellow and Black Lacquer.With the wood finish shell there are four baffles available: Matt Finish Ivory, Warm Taupe, Gauloise Blue and Dark Grey.  

This bookshelf loudspeaker from the Kanta N°1 line will discreetly blend into any unit or stand: it is the perfect solution for rooms under 270 ft2 (25 m²). Entirely dedicated to acoustic performance and with a resolutely personal aesthetic: that, in a nutshell, is the Kanta DNA! After three years of research, Focal offers a new combination of exclusive technologies: the marriage of Beryllium, in the next generation IAL3 tweeter, and Flax, for the midrange and bass speaker drivers.

The Kanta stand is available, as an option, the larger size stand (adjustable height of 24 to 25 inches - 615 to 641 mm) is available as an option for a classic installation of Kanta N°1.Finish: Graphite Black

This bookshelf loudspeaker from the Kanta N°1 line will discreetly blend into any unit or stand: it is the perfect solution for rooms under 270 ft2 (25 m²). Entirely dedicated to acoustic performance and with a resolutely personal aesthetic: that, in a nutshell, is the Kanta DNA! After three years of research, Focal offers a new combination of exclusive technologies: the marriage of Beryllium, in the next generation IAL3 tweeter, and Flax, for the midrange and bass speaker drivers.The result? A precise, detailed sound,brimming with warmth and musicality. It is the start of a new era for those who love sound... There’s a surprise in store right from the start of your listening experience, in the form of the extent of the bass frequency response for its dimensions. When positioned in an enclosed space such as this, or near to a wall, a piece of foam can be slid into the vent to optimise the bass even further.Another strong point of the line is its bold look that puts the finishing touch on this acoustic masterpiece with a resolutely modern and disruptive design!With eight front panel finishes, gloss or matt, there are several possible combinations. So many styles, each one so different from the next, means there’s something for everyone.Kanta has become a veritable, ultra stylish, designer object that will become the star of your interior. For the very first time, a Flax sandwich cone speaker has been combined with a Beryllium tweeter. Flax is the answer to the low mass/rigidity/damping equation, leading to sound clarity and precision.This unique Flax/Beryllium combination gives music incredible warmth and musicality. Made in France, this patented flax membrane has already proven itself in Focal home and in-car speakers. The midrange speaker uses TDM Tuned Mass Damping) suspension, and every Kanta speaker is also equipped with an NIC (Neutral Inductance Circuit) driver, which stabilises the magnetic field for perfectly defined sound and better controlled bass. Everything is designed and made to create acoustic softness and warmth: the density and stiffness of the baffle and shell materials, softened angles and double vents. The baffle is made of a new material to suit the acoustic parameters. It is moulded in one piece from high density polymer (HDP). This material has excellent performance: it is 70% denser than MDF, 15% stiffer and provides 25% more damping. The one-piece baffle totally eliminates any sound diffraction. Kanta incorporates Power Flow technology with two vents, on the front and rear faces, to limit bass compression. Focal's research is geared towards reducing distortion in every register. With Kanta, the treble register is reproduced by a new pure Beryllium tweeter. This IAL3 tweeter combines the principles of IAL (Infinite Acoustic Loading) and IHL (Infinite Horn Loading) tweeters, both of which help with the absorption of waves, thus lowering the tweeter frequency. Our engineers have revisited their choice of ‘Focus Time’, which corrects speaker alignment, making them the same distance from the ear.The rear shell is made in one-piece integrally moulded wood. The Zamac base also brings out masses of character. With its spikes and cups, the base provides great stability from a very small footprint. Final details: the glass-covered top and magnetic grille fixings.When these are removed, they reveal the speakers' flax cones, the final design touch that gives Kanta its unique look.A wide range of combinations are available to fit into every interior space. The back cover is available in High Gloss black lacquer and Walnut veneer. For each of these there are four baffle colours, in two finishes.With the High Gloss black shell there are four baffles available:High Gloss Carrara White, Gauloise Blue,Solar Yellow and Black Lacquer.  

Kanta N°3 is the reference product for the line: this Hi-Fi loudspeaker superbly combines depth, impact and articulation of the bass register. The definition and neutrality of the midrange are incredible. The next generation IAL tweeter reproduces the tiniest details with clinical precision. The result? A precise, detailed sound, brimming with warmth and musicality. It is the start of a new era for those who love sound...This acoustic masterpiece performs at its best in large rooms, from 430 to 860 ft² (40 to 80 m²). Entirely dedicated to acoustic performance and with an incredibly original look: that, in a nutshell, is the Kanta DNA! After three years of research, Focal offers a new combination of exclusive Hi-Fi technologies: the marriage of Beryllium, in the next generation IAL3 tweeter, and Flax, for the midrange and bass speaker drivers. Another strong point of the line is its bold look that puts the finishing touch on this acoustic masterpiece with a resolutely modern and disruptive design! With eight front panel finishes, gloss or matt, there are several possible combinations. So many different styles, each one so different from the next, means there’s something for everyone. Kanta has become a veritable, ultra stylish, designer object that will become the star of your interior. For the very first time, a Flax sandwich cone speaker has been combined with a Beryllium tweeter. Flax is the answer to the low mass/rigidity/damping equation, leading to sound clarity and precision. This unique Flax/Beryllium combination gives music incredible warmth and musicality. Made in France, this patented flax membrane has already proven itself in Focal home and in-car speakers. The midrange speaker uses TDM Tuned Mass Damping) suspension, and every Kanta speaker is also equipped with an NIC (Neutral Inductance Circuit) driver, which stabilises the magnetic field for perfectly defined sound and better controlled bass. Everything is designed and made to create acoustic softness and warmth: the density and stiffness of the baffle and shell materials, softened angles and double vents. The baffle is made of a new material to suit the acoustic parameters. It is moulded in one piece from high density polymer (HDP). This material has excellent performance: it is 70% denser than MDF, 15% stiffer and provides 25% more damping. The one-piece baffle totally eliminates any sound diffraction. Kanta incorporates Power Flow technology with two vents, on the front and rear faces, to limit bass compression. Focal's research is geared towards reducing distortion in every register. With Kanta, the treble register is reproduced by a new pure Beryllium tweeter. This IAL3 tweeter combines the principles of IAL (Infinite Acoustic Loading) and IHL (Infinite Horn Loading) tweeters, both of which help with the absorption of waves, thus lowering the tweeter frequency. Our engineers have revisited their choice of ‘Focus Time’, which corrects speaker alignment, making them the same distance from the ear. The rear shell is made in one-piece integrally moulded wood. The Zamac base also brings out masses of character. With its spikes and cups, the base provides great stability from a very small footprint.  Final details: the glass-covered top and magnetic grille fixings. When these are removed, they reveal the speakers' flax cones, the final design touch that gives Kanta its unique look. A wide range of combinations are available to fit into every interior space. The back cover is available in High Gloss black lacquer and Walnut veneer. For each of these there are four baffle colours, in two finishes. With the High Gloss black shell there are four baffles available: High Gloss Carrara White, Gauloise Blue,Solar Yellow and Black Lacquer. With the wood finish shell there are four baffles available: Matt Finish Ivory, Warm Taupe, Gauloise Blue and Dark Grey.

Be surprised by Kanta, highly original speakers that will reconnect you with your music. Entirely dedicated to acoustic performance and with a resolutely disruptive aesthetic: that, in a nutshell, is the Kanta DNA! It took three years of research and development to create this model, Kanta No. 2, the first in the range. With their new materials and effectiveness-focused design that give them their powerful identity, they come straight from our engineers' hearts.

Be surprised by Kanta, highly original speakers that will reconnect you with your music. Entirely dedicated to acoustic performance and with a resolutely disruptive aesthetic: that, in a nutshell, is the Kanta DNA! It took three years of research and development to create this model, Kanta No. 2, the first in the range. With their new materials and effectiveness-focused design that give them their powerful identity, they come straight from our engineers' hearts.

Maestro Utopia Evo has become a three-way floorstanding loudspeaker in order to make it more versatile and easier to install in your listening room. The bass is very consistent but it still retains Maestro’s characteristic dynamic range and punch. The mid-range register hasn’t been neglected: we have integrated our latest technical innovations. In conclusion, each register reproduced by Maestro Utopia Evo has been enhanced for even more precision and dynamic range. Evo stands for evolution... Since 2008, when Utopia III was launched, Focal’s technological heritage has grown enormously. Therefore it was essential to integrate the most recent innovations into this exceptional collection. The sound architecture of Utopia III has been preserved, with the constant intention of reducing harmonic distortion in the fragile mid-range register, which is so very crucial for revealing the artist’s emotions. The two loudspeakers are equipped with Focal’s latest innovations, the NIC (Neutral Inductance Circuit) and the TMD (Tuned Mass Damping) suspension. Maestro Utopia Evo now offers bi amplification, just like Grande Utopia EM and Stella. Discerning music lovers will be able to fine-tune the type of sound, depending on the timbre and the power they’re looking to achieve. The best components from their generation have also found their way into the Utopia III Evo line: cables made in France, denser acoustic materials inside the subwoofer, double terminal boards and separate crossovers. New finishes with distinctive colour-ways offer many options for today’s contemporary spaces. The 2017 edition of Utopia III Evo is an iconic line. They integrate a whole range of innovations and essential detailing, making them completely unique. They are still way ahead of any other line.

Sopra Center allows you to extend the Sopra experience to your Home Cinema. Sopra Center uses all the design aspects of Sopra loudspeakers in order to optimise integration into your home. The center loudspeaker is an essential component of home cinema systems because its role goes beyond reproducing just the dialogue. The mid-range must provide precision and coherence between the visuals and the soundstage. If the centre loudspeaker reproduces the majority of voices in the centre of the image, its spectrum is much broader and also includes music, sound effects and other sounds.The Sopra Center loudspeaker is the ideal complement for the other loudspeakers in the Sopra line: Sopra N°1 bookshelf loudspeakers and Sopra N°2 or Sopra N°3 floorstanding loudspeakers. Each model in the line offers high performance and consistency in terms of output, rendering and scale. Each speaker driver benefits from the same technologies: ‘W’ cones and pure Beryllium inverted dome tweeters. The soundstage therefore, is perfectly dispersed: the sound emanating from either side of the image is reproduced without variation of the timbre.Like all products in the Sopra line, Sopra Center is available in the Black Lacquer finish.The center loudspeaker is composed of:3" (8cm) 'W' cone midrange2 x 61/2" (16.5cm) 'W' cone woofers11/16" (27mm) pure Beryllium IAL tweeter. 

The Access 690 AC coaxial kit has been designed to reproduce deep bass throughout your vehicle. It will be equally at home in your car's doors or parcel shelf *. As with the other products in this range, its built-in filter means you can quickly connect your kit to a car stereo or power amplifier from our Performance range.Features:Cone DFS® (Dual fiberglass Structure),(climatic and power) high resistanceHigh power handling and heavy bassRotativ tweeterSpecification:Woofer: 6x9" (164x235mm)Voice-coil diameter: 13/16" (30mm)Voice-coil height: 07/16" (11mm)Magnet: 39/16" (90mm)Tweeter: Aluminum inverted domeCrossover: (4,7Khz) 6dB/octMax. power: 150 WattsNom. power: 75 Watts RMSSensitivity (2.83V/1m): 91.3dBFrequency response: 50Hz – 20kHzAccessories: Supplied grilles 

The Access 570 AC kit is specially designed to replace Ford®, Jaguar® and Mazda® oem audio installations. Its 5x7" dimensions, specially designed for these vehicles, mean that installation is simplified. And its integral filter simplifies speaker connections: all that is needed is a simple connection to your car stereo.Features:Cone DFS® (Dual fiberglass Structure), (climatic and power) high resistanceSpecific for Ford Jeep and Dodge carsHigh dynamique - deep bassRotativ tweeteSpecification:Woofer: 5x7" (130x180mm)Voice-coil diameter: 1" (25mm)Voice-coil height: 07/16" (11mm)Magnet: 31/3" (85mm)Tweeter: Aluminum inverted domeCrossover: (4,7Khz) 6dB/octMax. power: 120 WattsNom. power: 60 Watts RMSSensitivity (2.83V/1m): 88.65dBFrequency response: 65Hz – 20kHzAccessories: Without grille

The coaxial Access 130 AC kit offers real dynamism for your sounds. With their 130mm diameter, these speakers develop a rated power of 50 W and can be fitted into your car both front and back. This car audio kit marks access to the performance world: remarkable power handling, deep bass and extremely dynamic sound. All this is possible thanks to numerous Focal technical innovations and a new choice of specific materials.Features:Cone DFS® (Dual fiberglass Structure), (climatic and power) high resistanceExtremely dynamic soundRotativ tweeterSpecification:Woofer: 5" (130mm)Voice-coil diameter: 1" (25mm)Voice-coil height: 07/16" (11mm)Magnet: 31/3" (85mm)Tweeter: Aluminum inverted domeCrossover: (4,7Khz) 6dB/octMax. power: 100 WattsNom. power: 50 Watts RMSSensitivity (2.83V/1m): 89.3dBFrequency response: 70Hz – 20kHzAccessories: Supplied grilles 

The Access 100 AC car audio  produces very good results in your car's original speaker fitting locations. This means you benefit from Focal sound in a most impressive value-for-money package. The woofer's woven fibre glass DFS® cone gives you dynamic bass and a precise mid-range while being unaffected by damp. The aluminum inverted dome tweeter provides excellent spatial separation and a very wide sound stage.Features:Cone DFS® (Dual fiberglass Structure) (climatic and power) high resistanceCompact basketRotativ tweete​Specification:Woofer: 4" (100mm)Voice-coil diameter: 1" (25mm)Voice-coil height: 07/16" (11mm)Magnet: 213/16" (72mm)Tweeter: Aluminum inverted domeCrossover: (4,7Khz) 6dB/octMax. power: 80 WattsNom. power: 40 Watts RMSSensitivity (2.83V/1m): 87.2dBFrequency response: 70Hz – 20kHzAccessories: Supplied grilles

8" (21cm ) subwoofer, Multiferrite magnet. 21 WX combines smaller dimensions and limited inner volume for deep, high-impact bass reproduction.Features:8’’ reference subwooferW sandwich composite woofer coneFor small sealed box (15 to 30 liters)Multiferrite magnetVery high power handlingSpecifications:Type 8" (21cm) "W" subwooferFrequency response: (+/- 3dB) 29HzSensitivity (2.83V/1M) 86.5dBPower handling 250W/500WNominale impedance 4 ohmsVoice-coil diameter 2" (50mm)Voice-coil height 1" (25mm)Xmax 1/3" (8.5mm)

The IFBMW-S is a 2-way component kit with 4’’ woofers, and tweeters. Designed and Made in France, the IFBMW-S allows BMW® owners to enjoy Focal musicality, which is natural, rich and aerated, while respecting the aesthetics of the car! This kits are suitable for the German manufacturer’s best-selling models: 1 Series, 3 Series, 5 Series and X1 !Features:100% plug and play (original connectors)Quick installationImproving systems not equipped with tweetersSignificant results even without changing the OEM systemScalability in case of amplification or replacement of the head unitComplete pack (tools and clips supplied)Specifications:Woofer: 315/16" (100mm)Voice coil diameter: 1" (25mm)Voice coil height: 07/16" (11mm)Magnet: 213/16" (72mm)Aluminium/magnesium inverted dometweeterCrossover: 18 dB/oct (4 kHz)Max. power: 80WRms. power: 40WSensitivity (2.83V/1m): 90.5dBFrequency response: 85Hz – 22kHzNominal impedance: 4Ω 

By guaranteeing installation in less than an hour, keeping the original car radio, the IFP 207 brings a solution to all the Peugeot 207 owners who whish to discover the best of the audiophile sound. All the tools are supplied and a video shows the different steps of the installation. It couldn't be easier!Features:100% plug and playOriginal installation upgradeSignificant results without changing the car radioQuick and easy installation (less than 1h)Full pack (tools and staples supplied)Demonstration videoIC130 / IC165 coaxial speaker kits can be mountedat the back: PSA connection to buyShallow mounting that permitsImprovement of the original acousticsSpecifications:Diameter: 6 1/2" (165mm)Voice-coil diameter: 1" (25mm)Voice-coil height: 0 7/16" (11.6mm)Magnet: 3 1/3" (85mm)Aluminum/magnesium inverted dome TNB tweeterCrossover: 6 / 18dB/octMax. power: 140 WattsRMS power: 70 WattsSensitivity (2.83V/1m): 92.7dBKit bandwidth: 70Hz – 25kHzWoofer resistance: 2.6 Ohms 

Designed and Made in France, the IFBMW-C is a 4’’ 2-way coaxial speaker for cars which only have speakers in the doors.This is a simple, efficient and quick way to transform the OEM system. The sound from original simple wideband loudspeakers doesn’t even compare with the quality of the sound achieved thanks to the precise treble with wide dispersion and the aerated midrange.Features:100% plug and play (original connectors)Quick installationCompatibility and improvement of the original acoustics at the front or the rearSignificant results even without changing the OEM systemScalability in case of amplification or replacement of the head unitComplete pack (tools and clips supplied)Specifications:Woofer: 315/16" (100mm)Voice coil diameter: 1" (25mm)Voice coil height: 07/16" (11mm)Magnet: 213/16" (72mm)Aluminium/magnesium inverted dometweeterCrossover: 18 dB/oct (4 kHz)Max. power: 80WRms. power: 40WSensitivity (2.83V/1m): 90.5dBFrequency response: 85Hz – 22kHzNominal impedance: 4Ω

With a 61/2'' (165mm) woofer and an 80mm midrange, you can configure an installation to suit your desires and constraints. As with the other models in the range, this 3-way kit is a product of the Focal tradition. Very solidly built, this quality kit brings you high power handling, even after prolonged listening at high volume.With these 6x9" speakers and their rated power of 75W RMS, you can enjoy quality sound in your vehicle. The Kapton-mounted dual-layer 30mm coil guarantees high power handling and distortion-free sound reproduction. Power handling, great bass and acoustic performance remain the common denominators of the Access philosophy, which has marked its users from all over the world for more than the last ten years….Features:Cone DFS® (Dual fiberglass Structure),(climatic and power) high resistanceHigh sensitivity (Direct headunit using)Compact midrange 31/8 (80mm) (easy to install)Tweeter level adjustment - Extented in low frequenciesPower handlingSpecifications:Woofer diameter: 61/2" (165mm)Midrange diameter: 3" (80mm)Voice-coil diameter: 1" (25mm)Voice-coil height: 09/16" (15mm)Magnet: 31/3" (85mm)Tweeter: Aluminum inverted domeSeparate crossover: 12dB/OctAjustable Tweeter level: 3 positions (-3/0/+3dB)Max. power: 160WNom. power: 80WSensitivity (2.83V/1m): 90dBFrequency response: 55Hz – 20kHzAccessories: Supplied grilles

Be surprised by Kanta, highly original speakers that will reconnect you with your music. Entirely dedicated to acoustic performance and with a resolutely disruptive aesthetic: that, in a nutshell, is the Kanta DNA! It took three years of research and development to create this model, Kanta No. 2, the first in the range. With their new materials and effectiveness-focused design that give them their powerful identity, they come straight from our engineers' hearts.

Be surprised by Kanta, highly original speakers that will reconnect you with your music. Entirely dedicated to acoustic performance and with a resolutely disruptive aesthetic: that, in a nutshell, is the Kanta DNA! It took three years of research and development to create this model, Kanta No. 2, the first in the range. With their new materials and effectiveness-focused design that give them their powerful identity, they come straight from our engineers' hearts.

The legend is growing…  Undisputed musicality Unbelievable musicality, a beautiful design and easy to install, Scala Utopia Evo has retained all the qualities of the previous version which has been unanimously acclaimed by the most discerning audiophiles world wide.The Scala V2 takes you closer to the music with enhanced emotion and listening pleasure. Evo stands for evolution... Since 2008, when Utopia III was launched, Focal’s technological heritage has grown enormously. Therefore it was essential to integrate the most recent innovations into this exceptional collection.The sound architecture of Utopia III has been preserved, with the constant intention of reducing harmonic distortion in the fragile mid-range register, which is so very crucial for revealing the artist’s emotions. The two loudspeakers are equipped with Focal’s latest innovations, the NIC (Neutral Inductance Circuit) and the TMD (Tuned Mass Damping) suspension. The three-way floor standing loudspeaker Scala Utopia Evo now offers bi‑amplification, just like Grande Utopia EM and Stella. Discerning music lovers will be able to fine-tune the type of sound, depending on the timbre and the power they’re looking to achieve. The best components from their generation have also found their way into the Utopia III Evo line: cables made in France, denser acoustic materials inside the subwoofer, double terminal boards and separate crossovers. New finishes with distinctive colour-ways offer many options for today’s contemporary spaces. The 2017 edition of Utopia III Evo is an iconic line. They integrate a whole range of innovations and essential detailing, making them completely unique. They are still way ahead of any other line.                                    

The longest standing loudspeaker of the line, Sopra N°3 perfectly combines dynamics, space optimisation and harmonic richness. With its two 8¼" (21cm) woofers, this loudspeaker offers solid, rich and perfectly defined bass for music lovers looking for optimum performance. Despite its reasonable size, it will reveal its full potential in rooms measuring up to 860 ft2 (80 m2).Sopra clearly inaugurates a new era for the “Premium High End” by taking into account new performance criteria. Compact, modern, a pure design, character... all these are essential factors to ensure perfect integration into your interior. Equipped with best midrange drivers ever developed by Focal, with the NIC and TMD technologies, Sopra pushes back the limits of sound reproduction in terms of transparency in a very compact enclosure. Indeed, unlike Utopia, which is extravagant by essence and where size is by no means a constraint, Sopra aims for maximal compactness to ensure easy integration into reasonably sized rooms. Since the beginning, we have always had a great interest in the magnetic circuit, an essential aspect of a speaker drive unit. The precision and detail of audio reproduction depends on the stability of the magnetic field. NIC technology (Neutral Inductance Circuit) permits to control the magnetic field and finally enables to master it in order to limit distortion. It decreases the effects of distortion and give the sound a very high-definition and an unprecedented dynamic. The main theme of Sopra is deliberately uncluttered, though it still offers connoisseurs the opportunity to enjoy all the small details. The grille with an incremental meshing motif protects the Beryllium tweeter and gives it a strong identity. This motif is repeated for sealing the curved back panel of the middle section. The terminal board, the thumb nuts and the adjustable spikes have all been specially designed for Sopra, as have the few visible screws, all of which were manufactured by watchmaking experts. Made in France Sopra’s cabinet was designed in our cabinet-making facility in Bourbon-Lancy (Burgundy, France) using the same manufacturing process as for Utopia The 69mm sandwich-machined front panel uses the same principle as ‘Gamma Structure’ to provide inertia and damping. Its density gives it the inertia necessary to provide a stable mechanical reference for optimal definition. The inside of the cabinet has no parallel side panels, and small Helmholtz resonators have been added to the lower section to prevent vertical standing waves. We chose glass as th e material for the base of the loudspeaker to provide floor coupling, using spikes, which enabled the fastest propagation time possible, thus eliminating all halo effects in the bass.

Focal invents Dôme, miniature speakers with exceptional performance. Dôme has been designed and declined in two models with specific technologies to make rediscover true sound, without encroaching upon your living space. This high-end mini speaker succeeds in everything: refined design, sophisticated materials,  « Made in France » high-quality design and 100% Focal technologies from prestigious and renowned loudspeakers. In wall, in ceiling, on furniture or standing, Dôme comes to your place naturally and embodies brilliantly and eloquentlythe true Focal sound.Dôme speaker is available in two models with different Focal cone technologies. Dôme Polyglass, the original satellite loudspeaker of the range, is made of a Polyglass® cone Medium woofer which ensures neutrality, excellent dynamics and a precise sound image. The more recent addition to the family, Dôme Flax, benefits from the innovative composite sandwich cone made with natural flax. It has already proved its worth with the high-fidelity Aria 900 loudspeakers and the Car Audio kits in the Performance range. The Flax technology offers a distinct improvement in definition and better linearity in frequency response. Both versions are made of an aluminium/magnesium inverted dome tweeter, other technology developed by Focal.Dôme design is functional, sophisticated but refined. Dôme is the balance between aesthetic and technology. Its round shape is ideal to avoid internal resonances that distort the purity of timbers. Observe it well, everything is smooth, no visible screw, even the complicated system of joints on pivot is perfectly integrated and beyond suspicion. Imagined as a swivelling « sound spot », Dôme becomes an ideal music source for each and every room from 320ft2 to 430ft2.F cones are made of high-quality flax fibers core enclosed by two thin layers of glass fiber. They satisfy the key criteria of a high performance diaphragm : high internal damping, high velocity of sound and high flexural rigidity.Key points Dôme FlaxHigh-fidelity speaker, patented Flax technologyFocal sound with advanced technologiesIntegrated speaker: in wall, in ceiling, on furniture or standingHigh-gloss lacquered Aluminium bodyMade in France   Specifications:Type 2-way compact sealed speakerDrivers: 4" (10cm) Flax mid-bass, 1" (25mm) Al/Mg inverted dome tweeterFrequency response: (±3dB) 80Hz - 28kHzLow frequency point: (-6dB) 72HzSensitivity: (2.83V/1m) 88dBNominale impedance: 8 OhmsMinimum impedance: 4 OhmsCrossover frequency: 2500HzRecommended amplifier power: 25 - 100WDimensions: (HxWxD) 63/4x511/16x55/8" (172x144x143mm)Net weight: 1,9 kg 

Compact and powerful, Sopra N°1 is a concentration of technological innovation. It features "NIC" magnetic circuit,  TDM"" surrounds for the midrange woofer and Infinite Horn Loading (IHL) of the tweeter. It is a true "demonstrator", corroborating the contribution of the new technologies implemented on Sopra.First, the very low distortion gives it incredible clarity and very high definition combined with the spectacular spatialisation typical of bookshelf loudspeakers... Beyond this attractive first impression, what's astonishing is the texture and smoothness of its sound. It provides a solid, "fleshy" sound with full and articulated bass. Precious is by no means artificial, nor is the limited to the treble. The overall coherence and harmonic richness gives the listener a surprising understanding of the music. The Sopra line is destined for the most passionate sound enthusiasts. Its design favours performance, whilst bringing together the qualities expected of an object which will be integrated into very elegant interiors and décors. Lacquered or bloodwood finishes are associated to noble materials to create an elegant line. Substantial efforts were made to give the front a tidy appearance, particularly around the speaker drivers, to iron out any aspects which could afflict the acoustics or the appearance. Ideal for small rooms up to 270ft2 (25m2), Sopra n°1 is also ideal for spaces up to 550ft2 (50m2). Providing high sensitivity and excellent power handling, Sopra N°1 is a true little monitor for the home. Sopra N°1 is supplied with a special stand which has been designed to expel interfering vibrations from the enclosure towards the floor to avoid any colouration. The steel frame inside the floorstander, coupled with the 03⁄4" (19mm) thick glass base using four adjustable stainless steel spikes, provides very high transmission speeds. This is what guarantees an extremely sharp reproduction.NIC (Neutral Inductance Circuit)Since the beginning, we have always had a great interest in the magnetic circuit, an essential aspect of a speaker drive unit. The precision and detail of audio reproduction depends on the stability of the magnetic field. After having pushed back the limits in electromagnetic technology with the Grande Utopia EM and the Stella Utopia EM, our engineer discovered that the magnetic field varies regardless of its intensity. Indeed, it is not stable because it is modulated by three factors: the movement of the voice coil (Lenz's law), the current passing through it (Foucault current) and the frequency. Consequently, the voice coil, the moving part, is in the magnetic field which becomes too variable, and this leads to loss of precision.The NIC technology lies in a Faraday ring whose dimensions, materials and positioning we were able to optimise to make the magnetic field be no longer affected by the position of the voice coil, by the amperage or the frequency of the current passing through it. This solution permits to control the magnetic field to decrease the effects of distortion and give the sound a very high-definition and an unprecedented dynamic.TMD (Tuned Mass Damper)The midrange register is no doubt the most complicated to control in a sound system.Thanks to the power of finite element analysis, our teams have revealed resonances which alter definition in the suspension which connects the cone to the basketThe solutions already known for increasing the damping properties of the suspension all result in an increase of the mass which consequently alters definition. The answer came from a technology used in earthquake-resistant skyscrapers and which is also used for the suspension on racing cars. This technology is called a  " Tuned MAss Damper" : an additional mass oscillates in opposition to the resonance frequency to control it.Our Tuned Mass Damper consists in simply two tubular rings on the suspension to avoid deformation of the cone without afflicting the dynamics. It reduces drastically the distortion and increase the definition.IHL (Infinite Horn Loading)Our Beryllium tweeter features an incredibly light and extremely rigid dome, that deliver a transparent and dynamic sound. Its main limitation comes from the compression of air in the cavity behind it, that create interference with the incredible definition. To overcome this, the ideal would be to have a nearly infinite volume. But the requirement for Sopra to be compact meant that as much of the cabinet as possible had to be used for the bass. We had to explore other options for loading the tweeter, which led us to come up with the IHL system.The rear of the Beryllium tweeter is loaded via a small cavity which is connected to the exterior of the enclosure by a horn. whom inside is filled with a damping material. Sound waves from the rear of the tweeter are delicately and gradually absorbed. Its acoustic impedance approaches zero so that no resistance alters the movement of the dome. This reduces distortion by 30% and pushes definition to its maximum. 

The SW 1000 Be subwoofer is the redesigned version of the Electra Be subwoofer to ensure compatibility with the other loudspeakers in the Sopra line.It is equipped with a 13" (33cm) "W" cone speaker driver (high rigidity for no distortion, even at high volumes), a high-power 600 W RMS BASH® amplifier and a front laminar port (no dynamic bass compression).The 24-bit digital processor (DSP) offers a large control panel with settings for adapting the sub to various listening rooms. The SW 1000 Be offers very high performance with a bass cut-off frequency of 18 Hz and an SPL of 118 dB.Several SW 1000 Be subwoofers can be linked up. ΤECHNICAL SPECIFICATIONS: TypeActive bass-reflex subwoofer. Standard finishesBasalt - Champagne - Slate Grey On demand finishesOther finishes subject to estimate Drivers33cm woofer Frequency response (+or-3dB)20Hz - 150Hz Low frequency point18Hz Recommended amplifier power600W (750W max.) BASH® amplifier. Subwoofer featuresAdjustable LPF: 50Hz to 150Hz (24dB/oct.), 48dB/oct. adjustable subsonic filter, adjustable phase, Boost mode, Night mode, 3 user memories, LFe/Stereo/Digital enter. Dimensions (HxWxD)21-1/16x19-11/16x17" Net weight92.4Ibs (42kg) 

Kanta N°3 is the reference product for the line: this Hi-Fi loudspeaker superbly combines depth, impact and articulation of the bass register. The definition and neutrality of the midrange are incredible. The next generation IAL tweeter reproduces the tiniest details with clinical precision. The result? A precise, detailed sound, brimming with warmth and musicality. It is the start of a new era for those who love sound...This acoustic masterpiece performs at its best in large rooms, from 430 to 860 ft² (40 to 80 m²). Entirely dedicated to acoustic performance and with an incredibly original look: that, in a nutshell, is the Kanta DNA! After three years of research, Focal offers a new combination of exclusive Hi-Fi technologies: the marriage of Beryllium, in the next generation IAL3 tweeter, and Flax, for the midrange and bass speaker drivers. Another strong point of the line is its bold look that puts the finishing touch on this acoustic masterpiece with a resolutely modern and disruptive design! With eight front panel finishes, gloss or matt, there are several possible combinations. So many different styles, each one so different from the next, means there’s something for everyone. Kanta has become a veritable, ultra stylish, designer object that will become the star of your interior. For the very first time, a Flax sandwich cone speaker has been combined with a Beryllium tweeter. Flax is the answer to the low mass/rigidity/damping equation, leading to sound clarity and precision. This unique Flax/Beryllium combination gives music incredible warmth and musicality. Made in France, this patented flax membrane has already proven itself in Focal home and in-car speakers. The midrange speaker uses TDM Tuned Mass Damping) suspension, and every Kanta speaker is also equipped with an NIC (Neutral Inductance Circuit) driver, which stabilises the magnetic field for perfectly defined sound and better controlled bass. Everything is designed and made to create acoustic softness and warmth: the density and stiffness of the baffle and shell materials, softened angles and double vents. The baffle is made of a new material to suit the acoustic parameters. It is moulded in one piece from high density polymer (HDP). This material has excellent performance: it is 70% denser than MDF, 15% stiffer and provides 25% more damping. The one-piece baffle totally eliminates any sound diffraction. Kanta incorporates Power Flow technology with two vents, on the front and rear faces, to limit bass compression. Focal's research is geared towards reducing distortion in every register. With Kanta, the treble register is reproduced by a new pure Beryllium tweeter. This IAL3 tweeter combines the principles of IAL (Infinite Acoustic Loading) and IHL (Infinite Horn Loading) tweeters, both of which help with the absorption of waves, thus lowering the tweeter frequency. Our engineers have revisited their choice of ‘Focus Time’, which corrects speaker alignment, making them the same distance from the ear. The rear shell is made in one-piece integrally moulded wood. The Zamac base also brings out masses of character. With its spikes and cups, the base provides great stability from a very small footprint.  Final details: the glass-covered top and magnetic grille fixings. When these are removed, they reveal the speakers' flax cones, the final design touch that gives Kanta its unique look. A wide range of combinations are available to fit into every interior space. The back cover is available in High Gloss black lacquer and Walnut veneer. For each of these there are four baffle colours, in two finishes. With the High Gloss black shell there are four baffles available: High Gloss Carrara White, Gauloise Blue,Solar Yellow and Black Lacquer. With the wood finish shell there are four baffles available: Matt Finish Ivory, Warm Taupe, Gauloise Blue and Dark Grey.

The Dôme Focal stands are available in pair in order to install your Dôme loudspeakers in stereo or Home Cinema configuration.Features:High BrillianceLarge base for stabilityAluminum StructureAvailable in pairHeight: 33inchesWeight: 8lb

Sopra n°2 clearly inaugurates a new era for the “Premium High End” by taking into account new performance criteria. Compact, modern, a pure design, character... all these are essential factors to ensure perfect integration into your interior.It features "NIC" magnetic circuit,  TDM"" surrounds for the midrange woofer and Infinite Horn Loading (IHL) of the tweeter. It is a true "demonstrator", corroborating the contribution of the new technologies implemented on Sopra.First, the very low distortion gives it incredible clarity and very high definition combined with the spectacular spatialisation typical of bookshelf loudspeakers... Beyond this attractive first impression, what's astonishing is the texture and smoothness of its sound. It provides a solid, "fleshy" sound with full and articulated bass. Precious is by no means artificial, nor is the limited to the treble. The overall coherence and harmonic richness gives the listener a surprising understanding of the music.The Sopra line is destined for the most passionate sound enthusiasts. Its design favours performance, whilst bringing together the qualities expected of an object which will be integrated into very elegant interiors and décors. Lacquered or bloodwood finishes are associated to noble materials to create an elegant line. Substantial efforts were made to give the front a tidy appearance, particularly around the speaker drivers, to iron out any aspects which could afflict the acoustics or the appearance. Ideal for small rooms up to 270ft2 (25m2), Sopra n°1 is also ideal for spaces up to 550ft2 (50m2). Providing high sensitivity and excellent power handling, Sopra N°1 is a true little monitor for the home. Sopra N°1 is supplied with a special stand which has been designed to expel interfering vibrations from the enclosure towards the floor to avoid any colouration. The steel frame inside the floorstander, coupled with the 03⁄4" (19mm) thick glass base using four adjustable stainless steel spikes, provides very high transmission speeds. This is what guarantees an extremely sharp reproduction.NIC (Neutral Inductance Circuit)Since the beginning, we have always had a great interest in the magnetic circuit, an essential aspect of a speaker drive unit. The precision and detail of audio reproduction depends on the stability of the magnetic field. After having pushed back the limits in electromagnetic technology with the Grande Utopia EM and the Stella Utopia EM, our engineer discovered that the magnetic field varies regardless of its intensity. Indeed, it is not stable because it is modulated by three factors: the movement of the voice coil (Lenz's law), the current passing through it (Foucault current) and the frequency. Consequently, the voice coil, the moving part, is in the magnetic field which becomes too variable, and this leads to loss of precision.The NIC technology lies in a Faraday ring whose dimensions, materials and positioning we were able to optimise to make the magnetic field be no longer affected by the position of the voice coil, by the amperage or the frequency of the current passing through it. This solution permits to control the magnetic field to decrease the effects of distortion and give the sound a very high-definition and an unprecedented dynamic.TMD (Tuned Mass Damper)The midrange register is no doubt the most complicated to control in a sound system.Thanks to the power of finite element analysis, our teams have revealed resonances which alter definition in the suspension which connects the cone to the basketThe solutions already known for increasing the damping properties of the suspension all result in an increase of the mass which consequently alters definition. The answer came from a technology used in earthquake-resistant skyscrapers and which is also used for the suspension on racing cars. This technology is called a  " Tuned MAss Damper" : an additional mass oscillates in opposition to the resonance frequency to control it.Our Tuned Mass Damper consists in simply two tubular rings on the suspension to avoid deformation of the cone without afflicting the dynamics. It reduces drastically the distortion and increase the definition.IHL (Infinite Horn Loading)Our Beryllium tweeter features an incredibly light and extremely rigid dome, that deliver a transparent and dynamic sound. Its main limitation comes from the compression of air in the cavity behind it, that create interference with the incredible definition. To overcome this, the ideal would be to have a nearly infinite volume. But the requirement for Sopra to be compact meant that as much of the cabinet as possible had to be used for the bass. We had to explore other options for loading the tweeter, which led us to come up with the IHL system.The rear of the Beryllium tweeter is loaded via a small cavity which is connected to the exterior of the enclosure by a horn. whom inside is filled with a damping material. Sound waves from the rear of the tweeter are delicately and gradually absorbed. Its acoustic impedance approaches zero so that no resistance alters the movement of the dome. This reduces distortion by 30% and pushes definition to its maximum. 

In-wallI/In-Ceiling Loudspeakers with a 4" flax woofer.The 300 ICW 4 is an in-wall/in-ceiling loudspeaker which blends in perfectly with your décor. It is ideal for listening to stereo sound or for enjoying your favourite film soundtracks as part of a home cinema system. It is also appropriate for reproducing surround sound or even as part of a multi-channel system (5.1, 7.1, 5.1.2 etc.). Thanks to the natural and well-defined mid-range of these loudspeakers, they really enhance the voice of singers and film dialogues.The 300 ICW 4 In-wall/In-ceiling loudspeaker is the most compact model in the 300 Series line. Its discreet design gives it a great size/sensitivity ratio.This 2-way component loudspeaker is composed of a 4″ (10cm) woofer with a Flax cone and an aluminium/magnesium alloy inverted dome tweeter. Focal’s exclusive Flax technology is based on a flax-based eco-textile. The Flax cone is composed of a flax structure sandwiched between two sheets of glass fibres, giving it impressive rigidity considering its lightness. They’re worthy of the famous W cones used in the Utopia III, Sopra and Electra 1000 Be 2 lines, and produce sound with remarkable neutrality and definition. Technical Specifications:Type 2-WayDrivers 4" (10cm) Flax Mid-bass1" (25mm) Al/Mg inverted dome TweeterSensitivity (2.83 V/1m) 88dBFrequençy response (+/-3dB) 80Hz - 28kHzLow frequençy point (-6dB) 72HzNominal impedance 8 OhmsMinimal impedance 4.5 OhmsRecommended amplifier power 25 - 100WDimensions (Ø/Depth) 79⁄16 x 355/64" (192x98mm)Cut-Out diameter 627/64" (163mm)Depth behind surface 321⁄32" (93mm)Net weight (with grille) 2.6 lbs (1.3kg)Box dimensions (WxDxH) 1015⁄64 x 1015⁄64 x 927⁄32" (260x260x250mm)Total weight in box 5.07 lbs (2.3kg)​

The 100ICLCR5 in-ceiling loudspeakers can be highlighted for their acoustics performances and compact design. Here is the masterpiece for your Home Cinema system (in dedicated rooms or living rooms), installed in the ceiling which reinforces classic Hi-Fi loudspeakers or in-wall loudspeakers. It is also ideal for very large rooms without any rear wall nearby. Five possible applications: front left, center or right channels, rear left and rear right channels. This in-ceiling loudspeaker has a new aluminum inverted dome adjustable tweeter, more compact, improving the sound dispersion. Its two drive units are also equipped with a new Polyglass cone (5” – 13 cm).  A new crossover improves the off-axis listening and avoids the “shower effect”. Its three position switch allows choosing the left, center or right channels to adjust the treble level.This product can be installed everywhere thanks to a compact design with the speaker driver’s basket and chassis being redesigned as one only piece, frameless square and circular front grilles.The 100 Series brings an unexpected musicality to your home with ease.  Let yourself be surprised by the technology behind this product, an efficient design and ideal features for an easy use at this price.Specifications:Type 2-way in-ceilingDrivers 2 x 5" (13cm) Polyglass woofers, 1" (25mm) inverted dome tweeter, 8" (21cm) Polyglass passive radiatorSensitivity (2.83V/1m) 92dBFrequency response (+/-3dB) 65Hz - 23kHzLow frequency point (-6dB) 55HzNominal impedance 8 ΩMinimal impedance 4.6 ΩRecommended amplifier power 25 - 120WExternal dimensions (HxWxD) 1315/16" x 1315/16" x 55/16" (354 x 354 x 150mm)Cut-Out diameter (HxW) 1215/16" x 1215/16" (328 x 328mm)Depth from wall 6" (152mm)Net weight (with front grille) 11.6lbs (5.3kg)Packing dimensions (WxDxH) 161/16" x 161/16" x 71/2" (408 x 408 x 190mm)Total weight (with packaging) 15.8 lbs (7.2kg)

The Aria 936 is a 3-way loudspeaker featuring an elegant design and a small footprint. Very linear and with impressive dynamics, thanks to these 3 woofers, it is naturally intended for listening in stereo for monitoring-type activities. This loudspeaker is also ideal for setting up a spectacular Home Cinema system.Appropriate for rooms measuring from 270ft2 (25m2) and from a listening distance of 10-12ft (3m - 3.5m).Features:New Flax coneNew TNF tweeterSpeaker drivers developed and manufactured in France by FocalBlack High Gloss and Walnut finishesLeather-finished body

The Cub Evo is an iconic subwoofer, designed to provide high-quality 5.1 sound. The Cub3 is a compact product that incorporates only those functions strictly necessary for the purpose. This makes it extremely simple to install and use, and there is no need to compromise on acoustic performance. For optimal output, the Cub3 has a 21cm bassreflex woofer and modern 150 watt BASH amplification, allowing it to reproduce every nuance of the bass register. SPECS Exceptional performances in ultra compact size 8" high power High efficiency, high power, 150 W BASH amplifier Aerodynamic port for optimal performance

The Universal Wireless Receiver enables wireless connection of all your Bluetooth-compatible devices to your amplifier or multimedia system.More freedom for your mobile devices without impairing audio reproduction quality. The apt-X codec achieves a 4:1 compression ratio, allowing for near-CD quality listening. Features:Wireless transmission with near-CD qualityCompatible with all smartphones and tablet PCs equipped with Bluetooth technologyNo dongle required for the mobile deviceEasy to install and useAudio-visual use: low latencyRange of approximately 10 meters without obstaclesRCA extension cable supplied – compatible with all amplifiers equipped with stereo RCA inputCompatible with XS Book Music System

Be surprised by Kanta, highly original speakers that will reconnect you with your music. Entirely dedicated to acoustic performance and with a resolutely disruptive aesthetic: that, in a nutshell, is the Kanta DNA! It took three years of research and development to create this model, Kanta No. 2, the first in the range. With their new materials and effectiveness-focused design that give them their powerful identity, they come straight from our engineers' hearts.

The Dôme Focal stands are available in pair in order to install your Dôme loudspeakers in stereo or Home Cinema configuration.Features:High BrillianceLarge base for stabilityAluminum StructureAvailable in pairHeight: 33inchesWeight: 8lb

Sopra N°2 is the new epitome of today’s premium loudspeakers. It perfectly combines dynamics, space optimisation and harmonic richness. Sopra n°2 clearly inaugurates a new era for the “Premium High End” by taking into account new performance criteria. Compact, modern, a pure design, character... all these are essential factors to ensure perfect integration into your interior. Equipped with best midrange drivers ever developed by Focal, with the NIC and TMD technologies, Sopra n°2 pushes back the limits of sound reproduction in terms of transparency in a very compact enclosure. Indeed, unlike Utopia, which is extravagant by essence and where size is by no means a constraint, Sopra aims for maximal compactness to ensure easy integration into reasonably sized rooms. Sopra n°2 is perfectly at ease in rooms measuring up to 320ft2 (30m2), and is even ideal for larger rooms measuring up to 750ft2 (70m2).