Moving Magnet Cartridges

Concorde Music BlackExperience transparent and articulate sound quality with the Concorde Music Black. The Concorde Music Black features a Nude Shibata stylus on Aluminium cantilever, offers an upgrade from the Concorde Music Bronze and can be upgraded with the Stylus Concorde Music Black LVB 250.The Concorde Music seriesDeveloped by music lovers, for music lovers, the Concorde Music HiFi cartridges blend premium performance with an iconic design. Concorde Music, not just a cartridge, but a dedication to the profound impact music has on our lives, turning every listening session into a captivating journey.Installing a Concorde Music cartridge on a turntable is easy and straightforward, no tools required making it hassle free and convenient.Iconic designBuilding upon a rich legacy which began when we launched the original Concorde, the Concorde Music holds a storied history as one of the most famous cartridges in the world of audio.Originally developed as a solution to the challenge of easy mounting on a tonearm without screws or wires, the Concorde's unique design earned the Danish Industrial Design Award and became an icon inthe audio industry.StylusThe Concorde Music Black, featuring a Nude Shibata stylus on an Aluminum cantilever, offers an upgrade from the Concorde Music Bronze.The shape of the Shibata distinguish itself by having a narrow and long contact surface. The Shibata is very close to the original cutting stylus which ensures the most accurate reproduction, low distortion and exteded frequency range.Rubber suspensionA crucially important and vital part of a phono cartridge overall performance is the stylus rubber suspension.Exclusive Ortofon rubber compounds are used for the stylus suspensions in the Concorde Music Blue, carefully produced at the inhouse rubber production, and developed by the research and engineering team at Ortofon for brilliant performance.Coil systemThe Concorde Music features Ortofon's quad-coil generating system with four split pole pins. Silver-plated oxygen-free copper is chosen for the quad-coil system, along with four Ortofon split pole pins.This results in exceptional channel balance and separation, delivering precise and dynamic sound. With a 6 mV output, it offers lifelike sound with exceptional clarity and fidelity, capturing every detail.

Concorde Music BronzeThe Concorde Music Bronze features a Nude Fine Line stylus on Aluminium cantilever, offers an upgrade from the Concorde Music Blue. Enjoy seamless upgrades throughout the series, from your Concorde Music Bronze to the Concorde Music Black LVB 250, simply by replacing the stylus. Experience insightful, high-resolution sound reproduction! The Concorde Music seriesDeveloped by music lovers, for music lovers, the Concorde Music HiFi cartridges blend premium performance with an iconic design. Concorde Music, not just a cartridge, but a dedication to the profound impact music has on our lives, turning every listening session into a captivating journey.Installing a Concorde Music cartridge on a turntable is easy and straightforward, no tools required making it hassle free and convenient.Iconic designBuilding upon a rich legacy which began when we launched the original Concorde, the Concorde Music holds a storied history as one of the most famous cartridges in the world of audio.Originally developed as a solution to the challenge of easy mounting on a tonearm without screws or wires, the Concorde's unique design earned the Danish Industrial Design Award and became an icon inthe audio industry.StylusThe Concorde Music Bronze, featuring a Nude Fine Line stylus on an Aluminum cantilever, offers an upgrade from the Concorde Music Blue.The shape of the Nude Fine Line diamond provides more faithful tracking of the groove. Unlike the Elliptical shape, the Fine Line has a narrower profile, yet its prolonged shape ensures sufficient contact with a wide area of the groove. Experience your music with a whole new dimension of precision.Rubber suspensionA crucially important and vital part of a phono cartridge overall performance is the stylus rubber suspension.Exclusive Ortofon rubber compounds are used for the stylus suspensions in the Concorde Music Blue, carefully produced at the inhouse rubber production, and developed by the research and engineering team at Ortofon for brilliant performance.Coil systemThe Concorde Music features Ortofon's quad-coil generating system with four split pole pins. Silver-plated oxygen-free copper is chosen for the quad-coil system, along with four Ortofon split pole pins.This results in exceptional channel balance and separation, delivering precise and dynamic sound. With a 6 mV output, it offers lifelike sound with exceptional clarity and fidelity, capturing every detail.

Concorde Music BlueExperience unveiled and clear sound reproduction with the Concorde Music Blue, featuring a Nude Elliptical stylus on an Aluminum cantilever, and offers an upgrade from the Concorde Music Red. Enjoy seamless upgrades throughout the series, from the Concorde Music Blue to the Concorde Music Black LVB 250, simply by replacing the stylus.The Concorde Music seriesDeveloped by music lovers, for music lovers, the Concorde Music HiFi cartridges blend premium performance with an iconic design. Concorde Music represents a dedication to the profound impact music has on our lives, turning every listening session into a captivating journey.Installing a Concorde Music cartridge on a turntable is easy and straightforward, requiring no tools, making it hassle-free and convenient.Iconic designBuilding upon a rich legacy which began when we launched the original Concorde, the Concorde Music holds a storied history as one of the most famous cartridges in the world of audio.Originally developed as a solution to the challenge of easy mounting on a tonearm without screws or wires, the Concorde's unique design earned the Danish Industrial Design Award and became an icon inthe audio industry.StylusThe Concorde Music Blue, featuring a Nude Elliptical stylus on an Aluminum cantilever, offers an upgrade from the Concorde Music Red. Nude diamonds, weighing less than their tipped counterparts, enhance responsiveness, detail, and reduce distortion.Enjoy seamless upgrades throughout the series, from the Concorde Music Blue to the Concorde Music Black LVB 250, simply by replacing the stylus.Rubber suspensionA crucially important and vital part of a phono cartridge overall performance is the stylus rubber suspension. Exclusive Ortofon rubber compounds are used for the stylus suspensions in the Concorde Music Blue, carefully produced at the inhouse rubber production, and developed by the research and engineering team at Ortofon for brilliant performance.Coil systemThe Concorde Music features Ortofon's quad-coil generating system with four split pole pins. Silver-plated oxygen-free copper is chosen for the quad-coil system, along with four Ortofon split pole pins.This results in exceptional channel balance and separation, delivering precise and dynamic sound. With a 6 mV output, it offers lifelike sound with exceptional clarity and fidelity, capturing every detail.

Concorde Music RedExperience balanced and dynamic sound quality with the Concorde Music Red. The Concorde Music Red features an Elliptical stylus on an Aluminium cantilever and can be upgraded through the entire series to Concorde Music Black LVB 250, simply by replacing the stylus.The Concorde Music seriesDeveloped by music lovers, for music lovers, the Concorde Music HiFi cartridges blend premium performance with an iconic design. Concorde Music, not just a cartridge, but a dedication to the profound impact music has on our lives, turning every listening session into a captivating journey.Installing a Concorde Music cartridge on a turntable is easy and straightforward, no tools required making it hassle free and convenient.Iconic designBuilding upon a rich legacy which began when we launched the original Concorde, the Concorde Music holds a storied history as one of the most famous cartridges in the world of audio.Originally developed as a solution to the challenge of easy mounting on a tonearm without screws or wires, the Concorde's unique design earned the Danish Industrial Design Award and became an icon inthe audio industry.StylusThe Concorde Music Red features an Elliptical diamond polished to the highest standards of the industry, mounted on a premium aluminum cantilever. This ensures the best possible transmission of the vinyl record groove modulations picked up by the diamond.Rubber suspensionThe Concorde Music Red utilizes an exclusive Ortofon rubber compound for its stylus suspension. Developed and produced in our unique in-house rubber production, this suspension is a crucial and vital component contributing to the overall performance of the phono cartridge.Coil systemThe Concorde Music features Ortofon's quad-coil generating system with split pole pins. Silver-plated oxygen-free copper is chosen for the quad-coil system, along with four Ortofon split pole pins.This results in exceptional channel balance and separation, delivering precise and dynamic sound. With a 6 mV output, it offers lifelike sound with exceptional clarity and fidelity, capturing every detail.

Rega's classic MM cartridgeThe Elys 2 is a hand-built stereo moving magnet (MM) cartridge, made in England, and the successor to the popular Super Elys. Every unit is assembled by hand by Rega's skilled technicians with one simple aim: to retrieve as much detail and music from the record as possible. It combines an elliptical stylus, an aluminium cantilever and Rega's three-point mounting, and is easy to recognise by its blue body.Upgrade and factory-fitted optionRega recommends it as an upgrade for the Planar 2 and as an ideal match for the Planar 3 and Planar 6, and it suits every Rega turntable. In Greece the Planar 3 is also available with the Elys 2 factory-fitted. With an output of 6.8 to 7.2 mV it works comfortably with any MM phono stage, from the Fono Mini A2D MK2 and Fono MM MK5 to the phono stages of Rega amplifiers. On turntables from other makers it requires a headshell with three-point mounting.Rebuild and warrantyThrough the Rega rebuild scheme, a worn or damaged cartridge can be returned to a Rega dealer and exchanged for a rebuilt unit with a new cantilever, stylus and pivot pad at a reduced price. The Elys 2 is covered by Rega's Lifetime Limited Warranty against manufacturing defects.

The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club.The CLUB features a Special-Elliptic stylus that allows for detailed sound quality: Special-Elliptic stylus fits better in the groove and therefore has more contact area with the groove itself, extracting more intricate details, than is possible with a spherical diamond.The CLUB’s 8 mV output voltage requires less gain from the preamps, providing cleaner sound reproduction and less susceptibility to feedback in live environments.The CLUB offers an outstanding platform for archival and sampling.

The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club.The CLUB features a Special-Elliptic stylus that allows for detailed sound quality: Special-Elliptic stylus fits better in the groove and therefore has more contact area with the groove itself, extracting more intricate details, than is possible with a spherical diamond.The CLUB’s 8 mV output voltage requires less gain from the preamps, providing cleaner sound reproduction and less susceptibility to feedback in live environments.The CLUB offers an outstanding platform for archival and sampling.

The Concorde ELITE is a premium Moving Magnet cartridge, based on the legacy of the Ortofon Concorde MkII Series. Owing to the number of components' upgrades, the ELITE achieves a new level of sound quality, not previously found in the DJ categorized cartridges.

DescriptionThe AT-XP5 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 5.5 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.

The Audio-Technica AT-XP3 is a Dual Moving Magnet cartridge from the XP Series for DJs who will not compromise on sound. It offers everything a DJ cartridge needs, with durability and high output, but with the clean sound of a hi-fi cartridge, ideal for stage and club.Conical stylus and robust cantileverThe conical stylus with a carbon fibre reinforced ABS cantilever and nylon wire suspension ensures precise, stable tracking, even when scratching and back-cueing.Output for pro DJ setupsWith 5.5 mV output and impedance characteristics suited to professional DJ mixers. It fits a standard 1/2-inch headshell.

DescriptionThe AT-XP7 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 6.0 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables. The E3 cartridge, representing the top of the range features the same aluminium cantilever as the E2, but benefits from a superior, bonded, super-elliptical (0.3 x 0.7 mil) stylus. This gives it better high frequency detail retrieval over ordinary elliptical (0.4 x 0.7 mil) or spherical (0.6 mil) types due to its smaller front-to-back radius. The main effect is the reduction of sibilance, especially in high level vocal recordings Magnetic Duplex Technology™ All cartridges in the range feature Magnetic Duplex Technology™-a 'dual magnet' generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage. Expert Adjustment The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product. Stylus/Cantilever Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables. The E2 cartridge, the middle in the range, features the same spherical stylus profile as the E1 but with the additional benefit of an upgraded aluminium cantilever. This is both stiff and light weight allowing the stylus to more accurately trace medium to high frequencies offering more detail and reducing distortion and mis-tracking during loud passages. Magnetic Duplex Technology™ All cartridges in the range feature Magnetic Duplex Technology™-a 'dual magnet' generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage. Expert Adjustment The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product. Stylus/Cantilever Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables. The E1 cartridge, the first in the range, utilises a carbon-fibre reinforced cantilever and bonded, spherical (0.6 mil) stylus with a round shank. Carbon is an effective alternative to more premium aluminium or boron materials, producing comparable results in most entry level hi-fi applications. Magnetic Duplex Technology™ All cartridges in the range feature Magnetic Duplex Technology™-a 'dual magnet' generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage. Expert Adjustment The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product. Stylus/Cantilever Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

Genuine Denon replacement stylus for Denon MM turntable cartridges. Replacing the stylus in time keeps sound quality high and protects your records from wear.The role of the stylusThe stylus is the only point of contact between the turntable and the record. Its condition determines how faithfully the information cut into the groove is conveyed, and how well your records are preserved over the years. That is why replacing it in good time is one of the simplest and most effective care steps for any vinyl system.Small part, big responsibilityThe stylus tip moves within the groove and turns its tiny modulations into motion, which the cartridge converts into an electrical signal. Any deviation in the shape of the tip directly affects sound quality.Normal wearLike any part that works through friction, the stylus wears gradually with use. Wear is slow and often not noticed straight away, so its condition is worth checking at regular intervals.Replacement without changing the cartridgeIn moving magnet (MM) cartridges, such as those supplied with many Denon turntables, the stylus is a separate, removable part. You can renew the most delicate part of the cartridge without changing the whole cartridge and without re-adjusting the tonearm.Why genuine mattersA genuine Denon spare part is designed for the specific cartridge body, so it fits correctly and preserves the sound the manufacturer intended. Correct fit also ensures the tip sits in the right position within the groove, avoiding needless wear on your records.When to replace itThere is no single number of hours that applies to everyone, as stylus wear depends on how often you listen, how clean your records are and how well the turntable is set up. There are, however, clear signs that it is time for a new one, as well as simple habits that extend its life. Paying attention to them protects your collection.Audible signsIf the sound becomes dull or veiled, the treble loses its sparkle, or distortion appears in loud passages and on vocals, especially towards the end of a side, the stylus has most likely worn.Mechanical signsA stylus that skips grooves, slides across the record, or looks bent or crooked when viewed up close needs replacing immediately. Continued use can cause permanent damage to the grooves, which no new stylus can undo.Proper careClean the stylus regularly with a soft brush designed for the purpose, always moving it from back to front, and keep your records free of dust. Fit the stylus guard whenever you move or clean the turntable, when accidental knocks are most likely.Regular checksAn occasional check with a magnifying glass, or by your technician, helps spot wear early. It is a good idea to keep a spare stylus on hand, so listening is not interrupted when the time comes to change it. A worn stylus costs far less than a damaged record.Choosing and fittingDenon offers different replacement styli, each designed for a specific cartridge body. Choosing the correct code is the most important step. Once you have the right part, fitting is a simple process that takes a few minutes, needs no tools and restores your turntable's sound quality to how it was on the first day.Find the correct codeThe replacement stylus code is listed in the specifications and owner's manual of your turntable or cartridge. Compare it with the product code before buying. If in doubt, our team can help you confirm compatibility.Removing the old stylusBefore you start, lock the tonearm in its rest and switch the turntable off. Then gently pull the old stylus assembly forwards, without putting pressure on the cartridge body.Fitting the new oneSlide the new stylus into place, holding it by its plastic body, until it is fully seated. Then check the tracking force according to the manufacturer's instructions, so it reads the groove correctly and wears evenly. Finally, give the new tip a gentle clean before playing your first record.Ready to listenWith a new stylus, detail and clarity return and your records are protected. Make a note of the date you changed it, so you know when the next check is due, and keep the stylus guard fitted whenever the turntable is not in use.

Genuine Denon replacement stylus for Denon MM turntable cartridges. Replacing the stylus in time keeps sound quality high and protects your records from wear.The role of the stylusThe stylus is the only point of contact between the turntable and the record. Its condition determines how faithfully the information cut into the groove is conveyed, and how well your records are preserved over the years. That is why replacing it in good time is one of the simplest and most effective care steps for any vinyl system.Small part, big responsibilityThe stylus tip moves within the groove and turns its tiny modulations into motion, which the cartridge converts into an electrical signal. Any deviation in the shape of the tip directly affects sound quality.Normal wearLike any part that works through friction, the stylus wears gradually with use. Wear is slow and often not noticed straight away, so its condition is worth checking at regular intervals.Replacement without changing the cartridgeIn moving magnet (MM) cartridges, such as those supplied with many Denon turntables, the stylus is a separate, removable part. You can renew the most delicate part of the cartridge without changing the whole cartridge and without re-adjusting the tonearm.Why genuine mattersA genuine Denon spare part is designed for the specific cartridge body, so it fits correctly and preserves the sound the manufacturer intended. Correct fit also ensures the tip sits in the right position within the groove, avoiding needless wear on your records.When to replace itThere is no single number of hours that applies to everyone, as stylus wear depends on how often you listen, how clean your records are and how well the turntable is set up. There are, however, clear signs that it is time for a new one, as well as simple habits that extend its life. Paying attention to them protects your collection.Audible signsIf the sound becomes dull or veiled, the treble loses its sparkle, or distortion appears in loud passages and on vocals, especially towards the end of a side, the stylus has most likely worn.Mechanical signsA stylus that skips grooves, slides across the record, or looks bent or crooked when viewed up close needs replacing immediately. Continued use can cause permanent damage to the grooves, which no new stylus can undo.Proper careClean the stylus regularly with a soft brush designed for the purpose, always moving it from back to front, and keep your records free of dust. Fit the stylus guard whenever you move or clean the turntable, when accidental knocks are most likely.Regular checksAn occasional check with a magnifying glass, or by your technician, helps spot wear early. It is a good idea to keep a spare stylus on hand, so listening is not interrupted when the time comes to change it. A worn stylus costs far less than a damaged record.Choosing and fittingDenon offers different replacement styli, each designed for a specific cartridge body. Choosing the correct code is the most important step. Once you have the right part, fitting is a simple process that takes a few minutes, needs no tools and restores your turntable's sound quality to how it was on the first day.Find the correct codeThe replacement stylus code is listed in the specifications and owner's manual of your turntable or cartridge. Compare it with the product code before buying. If in doubt, our team can help you confirm compatibility.Removing the old stylusBefore you start, lock the tonearm in its rest and switch the turntable off. Then gently pull the old stylus assembly forwards, without putting pressure on the cartridge body.Fitting the new oneSlide the new stylus into place, holding it by its plastic body, until it is fully seated. Then check the tracking force according to the manufacturer's instructions, so it reads the groove correctly and wears evenly. Finally, give the new tip a gentle clean before playing your first record.Ready to listenWith a new stylus, detail and clarity return and your records are protected. Make a note of the date you changed it, so you know when the next check is due, and keep the stylus guard fitted whenever the turntable is not in use.

The AT-VM95SH, features a Nude Shibata stylus, one of the most acclaimed stylus format by high end audiophiles. The Shibata stylus produces mid and bass sounds strong and rich in addition to offer a frequency response up to 25,000 Hz. Aluminium cantilever 3.5mV output voltage Compatible body with all VM95 Series stylus assemblies 20 to 25,000Hz frequency response VM95 Series - Styli compatibility Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus. Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible. AT-VMN95C, AT-VMN95E, AT-VMN95EN, AT-VMN95ML, AT-VMN95SH, AT-VMN95SP AT-VM9E Series compatibility with the AT-XP Series DJ Cartridges The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers. VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers. Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli. The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing. The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction. ATN-XP7, ATN-XP5, ATN-XP3 Shibata Stylus Provides a beautiful mid-high range Shibata-signature sound and strong mid-range volume. No use of nuts VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

The Audio-Technica AT-VM95EN is a Dual Moving Magnet phono cartridge from the VM95 Series, with a 0.3 × 0.7 mil nude elliptical stylus and an aluminium pipe cantilever. The diamond is a single solid piece (nude) mounted directly in the cantilever, for a lighter and stiffer transmission than the bonded tip of the AT-VM95E, with a clear difference in high-frequency detail and transients.It fits any tonearm with a standard 1/2-inch headshell and, like every cartridge in the series, accepts any VM95 stylus, so you can upgrade the sound later by changing only the stylus.

The Audio-Technica AT-VM95C is a Dual Moving Magnet phono cartridge from the VM95 Series, with a 0.6 mil conical stylus and an aluminium pipe cantilever. It is the entry model of the series, successor to the legendary AT91 and AT91R, and the cartridge Audio-Technica fits to turntables such as the AT-LP70XBT.It fits any tonearm with a standard 1/2-inch headshell and, like every cartridge in the series, accepts any VM95 stylus, so you can upgrade the sound later by changing only the stylus.

The Audio-Technica AT-VM95ML is a Dual Moving Magnet phono cartridge from the VM95 Series, with a 2.2 × 0.12 mil nude microlinear stylus and an aluminium pipe cantilever. Its line-contact stylus delivers high resolution in the mid and high frequencies and reduces inner-groove distortion.It fits any tonearm with a standard 1/2-inch headshell and, like every cartridge in the series, accepts any VM95 stylus, so you can upgrade the sound later by changing only the stylus.

The Audio-Technica AT85EP is a Dual Magnet phono cartridge with a P-mount (T4P) connector, designed for linear-tracking turntables from Technics, Hitachi, Pioneer and similar models. With a 0.3 × 0.7 mil elliptical stylus and an aluminium cantilever, it brings Audio-Technica’s clear sound to these turntables.Dual Magnet and para-toroidal coilsThe dual magnet construction is combined with para-toroidal coils for excellent clarity and good channel separation (20 dB at 1 kHz).Installation without adjustmentThe P-mount cartridge plugs straight into the tonearm and is secured with a single screw, with no geometry or tracking force adjustment. With the AT-PMA1 adapter it can also be fitted to a tonearm with a 1/2-inch headshell.

The OM 5S is a moving magnet cartridge for general purpose applicationIf your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate. If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5 g. Styli types and interchangeabilityBy adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application and budget. In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Specifications : Output voltage at 1000 Hz, 5cm/sec. - 4.5 mV Channel balance at 1 kHz - 2 dB Channel separation at 1 kHz - 20 dB Channel separation at 15 kHz - 12 dB Frequency range at - 3dB - 20-20.000 Hz Frequency response - 20-22.000 Hz Tracking ability at 315Hz at recommended tracking force *) - 60 µm Compliance, dynamic, lateral - 20 µm/mN Stylus type - Spherical Stylus tip radius - R 18 µm Tracking force range - 1.5-2.0 g (15-20 mN) Tracking force, recommended - 1.75 g (17.5 mN) Tracking angle - 20° Internal impedance, DC resistance - 750 Ohm Internal inductance - 450 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-500 pF Cartridge colour, body/stylus - Black/Black Cartridge weight incl. extra weight - 5 g Cartridge weight excl. extra weight - 2.5 g

The Audio-Technica AT-VM95E is a Dual Moving Magnet phono cartridge from the VM95 Series, with a 0.3 × 0.7 mil elliptical stylus and an aluminium pipe cantilever. It succeeds the legendary AT95E and is one of the most popular upgrades from a turntable’s stock cartridge.It fits any tonearm with a standard 1/2-inch headshell and, like every cartridge in the series, accepts any VM95 stylus, so you can upgrade the sound later by changing only the stylus.

The VM510CB conical stylus cartridge is the entry-level 500 Series model in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM510CB is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s 0.6 mil conical bonded stylus tracks the center of the record groove for reliable performance and excellent fidelity. Includes mounting hardware. Specifications:VM dual magnet cartridge with 0.6 mil conical stylusAluminum cantileverParatoroidal coils improve generating efficiencyCenter shield plate between the left and right channels reduces crosstalkDurable low-resonance polymer housingFrequency Response: 20-20,000 HzChannel Separation: 25 dB (1 kHz)Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)Stylus Construction: Bonded round shankRecommended Load Impedance: 47,000 ohms

The Audio-Technica AT81CP is a Dual Magnet phono cartridge with a P-mount (T4P) connector and a 0.6 mil conical stylus. It is the affordable way to bring a turntable with a P-mount tonearm back to life, such as many linear-tracking turntables from Technics, Pioneer and others.Stable, reliable trackingThe conical stylus with a carbon fibre reinforced ABS cantilever tracks records with stability and a warm, full sound, with 3.5 mV output and a 20 – 20,000 Hz response.Installation without adjustmentThe P-mount cartridge plugs straight into the tonearm and is secured with a single screw, with no geometry or tracking force adjustment. With the AT-PMA1 adapter it can also be fitted to a 1/2-inch headshell.

The VM530EN is a top-end elliptical stylus cartridge in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM530EN is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s lightweight 0.3 x 0.7 mil elliptical nude stylus reduces the execution mass of the vibration system, enabling fuller frequency reproduction and less tracking distortion than a bonded stylus. Includes mounting hardware.Specifications:Frequency Response: 20-25,000 HzChannel Separation: 27 dB (1 kHz)Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)Stylus Construction: Nude round shankRecommended Load Impedance: 47,000 ohmsOutput: 4.5 mV (at 1 kHz, 5 cm/sec)Channel Balance: 1.5 dB (1 kHz)Stylus Shape: 0.3 x 0.7 mil ellipticalCantilever: Aluminum pipeMount: Half-inchReplacement Stylus: VMN30EN

The VM540ML MicroLine® stylus cartridge is the premier 500 Series model in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM540ML is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response.The cartridge’s MicroLine® stylus allows it to trace the record groove with incredible accuracy, resulting in nuanced audio reproduction that elliptical and conical styli simply can’t match. The stylus’s multilevel shape also wears better than other styli, while reducing the wear on your records. Includes mounting hardware. Specifications:Frequency Response: 20-27,000 HzChannel Separation: 28 dB (1 kHz)Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)Stylus Construction: Nude square shankRecommended Load Impedance: 47,000 ohmsOutput: 4.0 mV (at 1 kHz, 5 cm/sec)Channel Balance: 1.0 dB (1 kHz)Stylus Shape: 2.2 x 0.12 mil MicroLine®Cantilever: Aluminum tapered pipeMount: Half-inchReplacement Stylus: VMN40M 

The cartridge of the Planar 1 and Planar 2The Rega Carbon is a high-quality moving magnet (MM) cartridge designed for easy fitting and setup, with accurate music reproduction as its main goal. It is the cartridge factory-fitted to the Planar 1 and Planar 2 turntables and Rega's most affordable MM cartridge. The company presents it as one of the best-performing cartridges in its class relative to its price.Standard mounting for any tonearmThe Carbon uses the established half-inch, two-screw mounting, so it can be fitted not only to Rega tonearms but also to arms from other manufacturers. Its wide tracking force range, from 2 to 3 g, makes it forgiving to set up and ideal for anyone taking their first steps into vinyl. An output of 2.5 mV at 1 kHz suits any MM phono stage.WarrantyIt is covered by Rega's Lifetime Limited Warranty against confirmed manufacturing defects. The stylus, as a consumable part, is easily replaced by the user.

The Nagaoka MP-150 phonograph cartridge offers superior clarity, detail and dynamic contrast and offers fine solid bass, superb fluidity across the frequency spectrum, and sweet highs.Features:Superfine polished special eliptical diamond stylusPowerfull samarium cobalt magnetHardened low-mass, tapered aluminum alloy cantilever for very high fidelityCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Type: Moving magnetCantilever: Hardened, low-mass taperedStylus type: Superfine elliptical diamondWeight: 6.5 gOutput voltage: 1kHz,5cm/sec: 4.5mVFrequency response: 20Hz-20kHzChannel balance 1kHz: > 1.5dBChannel separation: 1kHz: > 24dBRecommended loading: 47k ohmsDynamic compliance: 6.0 x 10-6 cm/dyneStatic compliance: 18 x 10-6 cm/dyneTracking force range: 1.5 - 2.0 g

The Nagaoka MP-200 phonograph cartridge offers superior clarity, detail and dynamic contrast.Features:Superfine polished special eliptical diamond stylusPowerfull samarium cobalt magnetHardened low-mass, tapered aluminum alloy cantilever for very high fidelityCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Type: Moving magnetCantilever: High-strength BoronStylus type: Superfine elliptical diamondWeight: 6.5 gOutput voltage: 1kHz,5cm/sec: 4mVFrequency response: 20Hz-23kHzChannel balance: 1kHz: > 1.5dBChannel separation: 1kHz: > 25dBRecommended loading: 47k ohmsDynamic compliance: 7.2 x 10-6 cm/dyneStatic compliance: 20 x 10-6 cm/dyne Tracking force range: 1.5 - 2.0 g

The Nagaoka MP-300 phonograph cartridge offers sophistication, refinement and high-definition at all audible frequencies thus making it one of our favorite phonograph cartridges. It is nimble on the grooves and easy on the ears so you keep on wanting to listen. The Nagaoka MP300 is an advanced technology cartridge that is destined to become a classic out of the box.Features:Exclusive super rigid body for ultra resonance and superb fidelitySuperfine polished special eliptical bonded diamond stylusPowerfull samarium cobalt magnetHardened low-mass, high strenght boron cantileverCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Output voltage: 3mVFrequency response: 20 to 25,000HzChannel separation: 27dBChannel balance: 1.0dB or lessLoad resistance: 47K ohmsCantilever: boronStylus tip: 0.4 x 0.7 mil, diamondStylus pressure: 1.3 to 1.8gCartridge weight: 8gHeadshell weight: 13.5g

The Nagaoka MP-500 phonograph cartridge offers the highest musical and creative expression of the new MP series. It expertly extracts and reproduces with vivid, colorful and dimensional clarity what others miss. Meet our little friend - the Nagaoka MP-500 phonograph cartridge - the master of the grooves.Features:Exclusive super rigid body for ultra resonance and superb fidelitySuperfine line contact diamond stylusPowerfull samarium cobalt magnetLow-mass, high strenght boron cantileverCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casing  Specifications:Type: Moving magnetCantilever: High-strength boronStylus type: Superfine line contact diamondOutput voltage: 1kHz,5cm/sec: 3mVFrequency response: 20Hz-25kHzChannel balance: 1kHz: > 1dBChannel separation: 1kHz: > 27dBRecommended loading: 47k ohmsDynamic compliance: 8.5 x 10-6 cm/dyneTracking force range: 1.3 - 1.8 gWeight: 8 g

The Nagaoka MP-100H  phonograph cartridge offers musical clarity and expression beyond its price and competitors splendid upward start toward long term musical enjoyment.Features:Superfine polished conical diamond bonded stylusPowerfull samarium cobalt magnetLightweight aluminum alloy cantileverCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Type: Moving permalloyCantilever: Lightweight aluminum alloyStylus Type: Conical diamond with .0006 inch radiusCartridge weight: 6.5gHead shell's weight: 9.5Output Voltage: 1kHz, 5cm/sec: 5mVFrequency response: 20Hz-20 kHzChannel Balance: 1kHz: > 2dBChannel separation: 1kHz: > 22dBRecommended loading: 47k ohmsDynamic compliance: 5.5 x 10-6 cm/dyneStatic compliance: 18 x 10-6 cm/dyneTracking force range: 1.8 - 2.3g

The Nagaoka MP-110H the successor to the highly acclaimed and classic Nagaoka MP11 phonograph cartridge, the new Nagaoka MP-110 H phonograph cartridge extends and strengthens its predecessor's prowess and talents to a new level of radiance. You'll hear more music, more detail  refinement to enjoy and savor. The Nagaoka MP-110 is the cartridge to start with and to keep for a long time.Features:Superfine polished eliptical diamond bonded stylusPowerfull samarium cobalt magnetLightweight aluminum alloy cantilever for high fidelityCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Type: Moving permalloyCantilever: Aluminum alloyStylus Type: Superfine polished elliptical bonded diamond with 0.4 x 0.7 mil radiusCartridge weight: 6.5gHead shell's weight: 9.5Output Voltage: 1kHz, 5cm/sec: 5mVFrequency response: 20Hz-20 kHzChannel Balance: 1kHz: > 1.5dBChannel separation: 1kHz: > 23dBRecommended loading: 47k ohmsDynamic compliance: 6.0 x 10-6 cm/dyneStatic compliance: 18 x 10-6 cm/dyneTracking force range: 1.5 - 2.0g

The Nagaoka MP-150H phonograph cartridge offers superior clarity, detail and dynamic contrast.Features:Superfine polished special eliptical diamond stylusPowerfull samarium cobalt magnetHardened low-mass, tapered aluminum alloy cantilever for very high fidelityCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Type: Moving permalloyCantilever: Hardened, low-mass tapered aluminum alloyStylus Type: Superfine elliptical diamond with 0.4 x 0.7 mil Cartridge weight: 6.5gHead shell's weight: 9.5Output Voltage: 1kHz, 5cm/sec: 4.5mVFrequency response: 20Hz-20 kHzChannel Balance: 1kHz: > 1.5dBChannel separation: 1kHz: > 24dBRecommended loading: 47k ohmsDynamic compliance: 6.0 x 10-6 cm/dyneStatic compliance: 18 x 10-6 cm/dyneTracking force range: 1.5 - 2.0g

The Nagaoka MP-200H phonograph cartridge offers superior clarity, detail and dynamic contrast.Features:Superfine polished special eliptical diamond stylusPowerfull samarium cobalt magnetHardened low-mass, tapered aluminum alloy cantilever for very high fidelityCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Type: Moving permalloyCantilever: High-strength Boron Stylus Type: Superfine elliptical diamond with 0.4 x 0.7 mil Cartridge weight: 6.5gHead shell's weight: 9.5Output Voltage: 1kHz, 5cm/sec: 4mVFrequency response: 20Hz-23 kHzChannel Balance: 1kHz: > 1.5dBChannel separation: 1kHz: > 25dBRecommended loading: 47k ohmsDynamic compliance: 7.2 x 10-6 cm/dyneStatic compliance: 20 x 10-6 cm/dyneTracking force range: 1.5 - 2.0g

The Nagaoka MP-300H phonograph cartridge offers sophistication, refinement and high-definition at all audible frequencies thus making it one of our favorite phonograph cartridges. It is nimble on the grooves and easy on the ears so you keep on wanting to listen. The Nagaoka MP-300H is an advanced technology cartridge that is destined to become a classic out of the box.Features:Exclusive super rigid body for ultra resonance and superb fidelitySuperfine polished special eliptical bonded diamond stylusPowerfull samarium cobalt magnetHardened low-mass, high strenght boron cantileverCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Type: Moving permalloyCantilever: High-strength Boron Stylus Type: Superfine polished elliptical bonded diamond with 0.4 x 0.7 mil Cartridge weight: 8gHead shell's weight: 13.5gOutput Voltage: 1kHz, 5cm/sec: 3mVFrequency response: 20Hz-25 kHzChannel Balance: 1kHz: > 1dBChannel separation: 1kHz: > 25dBRecommended loading: 47k ohmsDynamic compliance: 7.2 x 10-6 cm/dyneStatic compliance: 20 x 10-6 cm/dyneTracking force range: 1.3 - 1.8g

The Nagaoka MP-500H phonograph cartridge offers the highest musical and creative expression of the new MP series. It expertly extracts and reproduces with vivid, colorful and dimensional clarity what others miss. Meet our little friend - the Nagaoka MP-500 phonograph cartridge - the master of the grooves.Features:Exclusive super rigid body for ultra resonance and superb fidelitySuperfine line contact diamond stylusPowerfull samarium cobalt magnetLow-mass, high strenght boron cantileverCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casing  Specifications:Type: Moving permalloyCantilever: High-strength Boron Stylus Type: Superfine line contact diamondCartridge weight: 8.0gHead shell's weight: 13.5gOutput Voltage: 1kHz, 5cm/sec: 3mVFrequency response: 20Hz-25 kHzChannel Balance: 1kHz: > 1dBChannel separation: 1kHz: > 27dBRecommended loading: 47k ohmsDynamic compliance: 8.5 x 10-6 cm/dyneTracking force range: 1.3 - 1.8g

The Nagaoka MP-100 phonograph cartridge offers musical clarity and expression beyond its price and competitors splendid upward start toward long term musical enjoyment.Half-inch system with conical diamond on lightweight aluminum cantilver. The Nagaoka MP-100 phone cartridge offers musical clarity and expression beyond its price and competitors - a plendid upwards start toward long term musical enjoymentFeatures:Superfine polished conical diamond bonded stylusPowerfull samarium cobalt magnetLightweight aluminum alloy cantileverCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Type: Moving magnetCantilever: Lightweight aluminum alloyStylus type: Conical diamond with .0006 inch radiusWeight: 6.5 gOutput voltage: 1kHz,5cm/sec: 5mVFrequency response: 20Hz-20kHzChannel balance  1kHz: > 2dBChannel separation: 1kHz: > 22dBRecommended loading: 47k ohmsDynamic compliance: 5.5 x 10-6 cm/dyneStatic compliance: 18 x 10-6 cm/dyneTracking force range: 1.5 - 2.3 g

Κεφαλή ΜΜ(κινητού μαγνήτη)Προδιαγραφές:Output voltage at 1000 Hz, 5cm/sec.5 mVChannel balance at 1 kHz1 dBChannel separation at 1 kHz26 dBChannel separation at 15 kHz15 dBFrequency range at - 3dB20-29.000 HzFrequency response20-20.000 + 2 / - 0 dBTracking ability at 315Hz at recommended tracking force80 µmCompliance, dynamic, lateral22 µm/mNStylus typeNude Fine LineStylus tip radiusr/R 8/40 µmTracking force range1,4-1,7g (14-17 mN)Tracking force, recommended1,5 g (15 mN)Tracking angle20°Internal impedance, DC resistance1,2 kOhmInternal inductance630 mHRecommended load resistance47 kOhmRecommended load capacitance150-300 pFCartridge colour, body/stylusBlack/BronzeCartridge weight 7,2 g 

Κεφαλή ΜΜ(κινητού μαγνήτη)Προδιαγραφές:Output voltage at 1000 Hz, 5cm/sec.5,5 mVChannel balance at 1 kHz 1,5 dBChannel separation at 1 kHz25 dBChannel separation at 15 kHz15 dBFrequency range at - 3dB20-25.000 HzFrequency response20-20.000 Hz + 2 / - 1 dBTracking ability at 315Hz at recommended tracking force80 µmCompliance, dynamic, lateral20 µm/mNStylus typeNude EllipticalStylus tip radiusr/R 8/18 µmTracking force range1,6-2,0g (16-20 mN)Tracking force, recommended1,8 g (18 mN)Tracking angle20°Internal impedance, DC resistance1,3 kOhmInternal inductance700 mHRecommended load resistance47 kOhmRecommended load capacitance150-300 pFCartridge colour, body/stylusBlack/BlueCartridge weight7,2 g 

Κεφαλή ΜΜ(κινητού μαγνήτη)Προδιαγραφές:Output voltage at 1000 Hz, 5cm/sec.4 mVChannel balance at 1 kHz2 dBChannel separation at 1 kHz22 dBChannel separation at 15 kHz15 dBFrequency range at - 3dB20-25.000 HzFrequency response20-20.000 Hz ± 2 dBTracking ability at 315Hz at recommended tracking force *)65 µmCompliance, dynamic, lateral20 µm/mNStylus typeEllipticalStylus tip radiusr/R 8/18 µmTracking force range1,5-2,0 g (15-20 mN)Tracking force, recommended1,75 g (17,5 mN)Tracking angle20°Internal impedance, DC resistance750 OhmInternal inductance450 mHRecommended load resistance47 kOhmRecommended load capacitance200-600 pFCartridge colour, body/stylusBlack/BlackCartridge weight5 g