MENU
We will notify you as soon as the product is in stock in our warehouse! The orders will be placed in priority order and we do not guarantee that the price will remain the same.
Audio Technica AT-ART9XA
SKU: APA2021-00649
-
Free Shipping -
36 Instalments
-
2 Years Warranty
An update of the AT-ART7, the AT-ART9XA non-magnetic core MC cartridge features a Shibata stylus on a 0.28 mm diameter solid boron cantilever....more
-
Free Shipping
-
36 Instalments
-
2 Years Warranty
1.799 €
VAT included and Free Shipping
Upon Order
Notify me when the product is available
Add to cart
Add to Wishlist
Related products
Audio Technica AT-OC9XML
Dual moving coil stereo cartridge with Microlinear stylus
AT-OC9XML Dual moving coil stereo cartridge with Microlinear stylus - Features nude Microlinear stylus and boron cantilever , Neodymium magnet and permendur yoke for increased magnetic energy and Features threaded inserts in the cartridge body
The next Generation of the legendary OC9 cartridge series
Since its introduction more than 30 years ago, Audio-Technica’s pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. Microlinear complex diamond profile enabling higher frequency response, detail like never before experienced and limiting inner groove distortion. Microlinear diamond profile provides low record and stylus wear.
Features nude Microlinear stylus and boron cantilever which provides lower distortion and high transient response
A neodymium magnet and permendur yoke provides dramatically increased magnetic energy
Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required
Aluminium body minimizes unwanted vibration for reduced resonance and a superior audio reproduction
Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer
Microlinear Stylus
Microlinear diamond profile offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.
Easy mounting
Threaded holes in the cartridge body enable the cartridge to be mounted on to the headshell, or integral tonearm, with just two screws M2.6 – no nuts or bolts required.
Aluminium Body
Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction
699 €
Lyra Delos
While vinyl records played back with an MC cartridge can sound exceptionally good, it is a surprising fact that the design of conventional MCs restricts the sound quality that can be achieved from LPs. An essential factor for proper operation of an MC cartridge is the angle between the magnetic circuit, signal coils and core. Performance is optimal when the angles are all aligned, but any significant difference in the angles will cause the formation of a strong and directional flux that will flow constantly from the magnetic circuit into the signal core. This directional magnetic flux will orient the core toward a specific direction and make it impossible for the core to move with equal ease in all directions, which is necessary for proper cartridge performance. Unfortunately, conventional MC cartridges have been designed so that the angles between magnetic circuit, signal coils and core become aligned only when tracking force is not applied. The result is that during playback, the required tracking force causes the angle between magnetic circuit, signal coils and core to become misaligned. This limits the cartridge’s resolution, tracking ability and dynamic range.The new Lyra Delos is designed to conquer this problem. Compared to conventional cartridges, the Delos has a new body structure with an unusually shallow angle, and this has been paired with a unique asymmetrical damping system. When no tracking force is applied, the shape of the asymmetrical dampers forces the signal coils and core into a more upright angle than the magnetic circuit.However, no tracking force applied means that the cartridge is not operating, and therefore any angular discrepancies between magnetic circuit, signal coils and core will have no effect on performance. When tracking force is applied, however, the force of the stylus pushing on the LP causes the asymmetrical dampers to be deformed into a symmetrical shape, and when this happens the angular discrepancies between magnetic circuit, signal coils and core all disappear. Since tracking force applied means that the cartridge is now operating, it should be clear that the design of the Delos is able to keep the angles between the magnetic circuit, signal coils and core aligned during playback.Keeping the proper angular alignment prevents the formation of any strong and directional flux that could otherwise flow constantly from the magnetic circuit into the signal core, and enables the Delos’ core to move with equal ease in all directions, for optimal performance.The Delos also has a microridge stylus on a boron cantilever for outstanding tracking, a non-parallel solid machined metal body for low resonances, and 6-N high-purity copper coils and nude construction for greater clarity. The result is clearly improved sound quality, particularly resolution, tracking ability, dynamic range, transient impact and immediacy.Feel free to audition the Lyra Delos, and hear how good a New Angle can make your LPs sound.
1.680 €
Dynavector DV-20 X2H
For more than 35 years Dynavector have established an enviable reputation for producing affordable high quality moving coil cartridges. Notably high output models that are designed to work with MM inputs negating the necessity for equipment change or the use of setup devices required for low output cartridges. The outstanding performance of the Dynavector high output moving coil cartridges can be attributed to the exclusively Dynavector designed coil winding machine capable of utilizing extremely fine coil wire providing a high output to mass ratio.Features and ImprovementsDV-20X has a solid aluminum alloy body and a rigid magnet construction similar to XX-2MKII. The cantilever is a 6mm length of hard aluminum pipe with a Micro-Ridge stylus. The magnetic flux damping and softened magnetism along with powerful neodymium magnets gives the 20X2H a healthy 2.8 mV output - suitable for most MM inputs. The high output model is well suited to valve preamplifiers or electronics that only offer MM inputs.
1.150 €
Hana SL
Hana SL is the most reviewed and awarded Hana cartridge to date. It is distinguished by its black body and a Shibata stylus expertly mounted to its aluminum cantilever. The Hana SL features tighter channel balance, greater channel separation, and improved high-frequency extension. “A first-class MC cartridge” – STEREO (Germany) “Remarkably smooth frequency response…terrific value for the money.” – HiFi World (UK) “In the same class as a cartridge costing 10x the price.” – TNT Audio (France) Stereophile Recommended Component USA The Absolute Sound USA Golden Ear Award 2017Rocky Mountain International HiFi Press Award winner 2018 and 2019
750 €
Deal
Hana EH - high output
The Hana EH high-output moving coil cartridge represents the best way to upgrade from “starter” MM cartridges that typically come packaged with most entry-level turntables. Weighing in at only 5 grams, and possessing great tracking ability, the Hana EH cartridge’s distinctive moss green body houses a special cross-coil generator, reproducing great bass and dynamics. The elliptical stylus mounted to an aluminum cantilever easily extracts the music in the groove as it effortlessly traces you LPs.The EH is plug-and-play compatible with MM phono stages found in integrated amplifiers and AV receivers.
480 €
Denon DL-103
The DL-103 is a living legend in audio product history. Denon collaborated with the Japan Broadcasting Corporation Technical Research Laboratories in 1963 to make this extremely reliable, high performance low-output phono cartridge. As the first moving coil cartridge, the DL-103 will always be the standard of reliability in every aspect, even the price. From quality inspectors at EMI and Decca, to recording studios, broadcasters, and music lovers around the world, the DL-103 is synonymous with great sound. The mark of the Denon is excellent tracking, as pops and ticks are pushed farther into the sonic background.Widely used in the past for broadcasting , the Denon DL-103 uses a high-quality nude, square shank meticulously mounted to Denon's own conical aluminum cantilever with a cross-shaped armature. This reduces mass such that rich tonal qualities are natural and convincing. This cartridge boasts independent moving coils, a flat frequency response, and a single-point suspension system.Specifications:Frequency response (Hz): 20-45,000Output@1khz, 50mm/sec: .3mVOutput impedance: 40 ohmsLoad impedance: 100ohmsChannel seperation at 1kHz: over 25dbChannel sensitivity: 1dB or lessTracking tip: 16.5 micron special round solid diamondCopliance: 5x10-6cm/dyne (100Hz)Tracking force- 2.3~2.7gCantilever: aluminum, conicalMass: 8.5g
295
,9 €
Denon DL-110
To get the maximum enjoyment out of your vinyl collection, check out the DL-110 phono cartridge. Its high output allows you to use it interchangeably with a moving magnet phono input. The DL-110 has a way of getting into the grooves and extracting the information contained therein with total authority.Specifications:Type: MC Weight: 4.8 Output impedance:160 ohmsFrequency range: 20 Hz - 45 Output voltage: 1.6 m
302
,92 €
Dynavector DV-10X5 mkII - high output
First released in 1978 and recipient of the prestigious (at the time) Design and Engineering Award at the Chicago CES in both 1978 and 1981. The new Dynavector 10X5 MKII MC cartridge presents a new benchmark in High Output MC cartridge performance not requiring a step-up device or MC phono preamplifier.ImprovementsAlong with several exclusive Dynavector technologies that include Magnetic Flux Damping, Softened Magnetism (Patent) and powerful neodymium magnets that provide the smooth treble response Dynavector are renowned for.The Dynavector 10X5 MKII also features an improved stylus assembly with the nude diamond “Shibata III” line contact stylus and improved hardened cantilever material. These improvements ensure secure tracking ability over even the most torturous of record grooves whilst achieving extended high frequency response and enhanced musical resolution.The legendary Dynavector coil winding technology using the finest of wire has enabled the Dynavector 10X5 MKII to minutely increase the coil windings and achieve a reduction in impedance to 150 ohms whilst retaining a healthy 2.8mV output.Mounting the cartridge to the tonearm is achieved by a rigid red aluminium head block that provides a stable platform for the cartridge along with easy and secure fixing to the tonearm.
752
,85 €
Audio Technica AT-OC9XSL
Dual moving coil stereo cartridge with Special Line Contact stylus
AT-OC9XSL Dual moving coil stereo cartridge with Special Line Contact stylus - Features a Nude Special Line Contact stylus and boron cantilever , Neodymium magnet and permendur yoke for increased magnetic energy and Features threaded inserts in the cartri.
The next Generation of the legendary OC9 cartridge series
Since its introduction more than 30 years ago, Audio-Technica’s pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. Special Line Contact as featured in our flagship ART1000, this diamond profile offers the ultimate in accurate sonic reproduction with a sense of space and realism to all instruments that few other configuration can achieve.
Features Nude Special Line Contact stylus and boron cantilever with accurate tracking ability and high transient response
A neodymium magnet and permendur yoke provides dramatically increased magnetic energy
Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required
Aluminium body minimizes unwanted vibration for reduced resonance and a superior audio reproduction
Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer
Special Line Contact Stylus
Special Line Contact diamond profile offers the ultimate in accurate sonic reproduction
Easy mounting
Threaded holes in the cartridge body enable the cartridge to be mounted on to the headshell, or integral tonearm, with just two screws M2.6 – no nuts or bolts required.
Aluminium Body
Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction
929 €
An update of the AT-ART7, the AT-ART9XA non-magnetic core MC cartridge features a Shibata stylus on a 0.28 mm diameter solid boron cantilever.
The “ART” in the model number stands for Audio-Technica Reference Transducer, a designation that we give only to our flagship phono cartridges. Compared with the magnetic core used in most MC cartridges, non-magnetic core cartridges are free from magnetic distortion, allowing for natural timbre and a precise sound field. Although conventional non-magnetic cores struggle with output voltage, the AT-ART9XA features a newly designed coil armature with an improved output voltage of 0.2 mV (1 kHz, 5 cm/sec).
The dual moving coils (fashioned from high-performance PCOCC wire) are aligned in an inverted V shape to provide high separation and wide response. Threaded cartridge mounting holes make installation to a headshell or integrated tonearm incredibly easy.
Specifications
-
Non-magnetic core moving coil cartridge offers superior spatial representation
- Dual moving coils are aligned in an inverted V shape, providing high separation and wide response for clear sound localization and minimal distortion
- Shibata stylus ensures accurate high and mid-low range reproduction, and the 0.28 mm diameter solid boron cantilever provides excellent response characteristics
- Neodymium magnet and permendur yoke significantly increase magnetic energy
- Redesigned coil armature provides an output voltage of 0.2 mV (1 kHz, 5 cm/sec)
- PCOCC coils ensure high-fidelity transmission
- Machined aluminum base supports both the magnetic circuit and the vibration system, ensuring excellent playback stability
- Hybrid body of machined aluminum and high-rigidity plastic reduces undesirable parasitic resonance
- Threaded cartridge mounting holes allow easy installation to a headshell or integrated tonearm
Cartridge & Stylus
- Frequency Response: 20-50,000 Hz
- Channel Separation: 30 (dB at 1 kHz)
- Vertical Tracking Angle: 20°
- Vertical Tracking Force: 1.6-2.0 g (1.8 g standard)
- Stylus Construction Nude
- Recommended Load Impedance Min. 100 ohms (when head amplifier connected)
- Coil Impedance: 12 ohms (1 kHz)
- DC Resistance: 12 ohms
- Coil Inductance: 2.5 µH (1 kHz)
- Output Voltage: 0.2 mV (1 kHz, 5 cm/sec.)
- Output Channel Balance: 0.5 dB (1 kHz)
- Stylus Shape Shibata
- Cantilever: 0.28 mm diameter solid boron
- Static Compliance: 20 x 10-6 cm/dyne
- Dynamic Compliance: 10 x 10-6 cm/dyne (100 Hz)
- Mounting Half-inch
- Cartridge Weight: 8.5 g (0.30 oz)
- Dimensions: 17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.0 mm (0.98") D
- Accessories: Included Non-magnetic screwdriver; 2 washers; cartridge installation screws (M2.6) (5.0 mm × 2, 8.0 mm × 2, 10.0 mm x 2, 12.0 mm x 2); protector; brush
- Threaded Hole: M2.6 x 2
- Notes Note: moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable.
Write your Review
How would you rate this product?
Follow us on Social Media
Don't miss out on new products and events by Athens Pro Audio.
Stock Notice
Audio Technica AT-ART9XA
