Audio Technica AT85EP

Audio Technica AT81CP

The Audio-Technica AT81CP is a Dual Magnet phono cartridge with a P-mount (T4P) connector and a 0.6 mil conical stylus. It is the affordable way to bring a turntable with a P-mount tonearm back to life, such as many linear-tracking turntables from Technics, Pioneer and others.Stable, reliable trackingThe conical stylus with a carbon fibre reinforced ABS cantilever tracks records with stability and a warm, full sound, with 3.5 mV output and a 20 – 20,000 Hz response.Installation without adjustmentThe P-mount cartridge plugs straight into the tonearm and is secured with a single screw, with no geometry or tracking force adjustment. With the AT-PMA1 adapter it can also be fitted to a 1/2-inch headshell.

36 ,5 €

Audio Technica AT-VM95E

The Audio-Technica AT-VM95E is a Dual Moving Magnet phono cartridge from the VM95 Series, with a 0.3 × 0.7 mil elliptical stylus and an aluminium pipe cantilever. It succeeds the legendary AT95E and is one of the most popular upgrades from a turntable’s stock cartridge.It fits any tonearm with a standard 1/2-inch headshell and, like every cartridge in the series, accepts any VM95 stylus, so you can upgrade the sound later by changing only the stylus.

59 €

Audio Technica AT-VM95C

The Audio-Technica AT-VM95C is a Dual Moving Magnet phono cartridge from the VM95 Series, with a 0.6 mil conical stylus and an aluminium pipe cantilever. It is the entry model of the series, successor to the legendary AT91 and AT91R, and the cartridge Audio-Technica fits to turntables such as the AT-LP70XBT.It fits any tonearm with a standard 1/2-inch headshell and, like every cartridge in the series, accepts any VM95 stylus, so you can upgrade the sound later by changing only the stylus.

42 ,5 €

Audio Technica AT-VM95EN

The Audio-Technica AT-VM95EN is a Dual Moving Magnet phono cartridge from the VM95 Series, with a 0.3 × 0.7 mil nude elliptical stylus and an aluminium pipe cantilever. The diamond is a single solid piece (nude) mounted directly in the cantilever, for a lighter and stiffer transmission than the bonded tip of the AT-VM95E, with a clear difference in high-frequency detail and transients.It fits any tonearm with a standard 1/2-inch headshell and, like every cartridge in the series, accepts any VM95 stylus, so you can upgrade the sound later by changing only the stylus.

139 €

Ortofon 2M Red

With the 2M Red you will hear the music come to life on its own terms. It is like taking a step into music itself. This is our entry-level cartridge in the series, but what an entry.Featues:The 2M Red features a tipped Elliptical diamond and split pole pins with a copper wire. The engine provides an increased output of 5.5 mV and an optimized sound reproduction and a high level of sonic accuracy. Designed for easy mounting of the cartridge, and for the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps. 2M Red delivers an open, dynamic sound with a slight touch of warmth.

109 €

Nagaoka MP-110

Nagaoka MP-110 the successor to the highly acclaimed and classic Nagaoka MP11 phono cartridge, the new Nagaoka MP-110 phono cartridge extends and strengthens its predecessor's prowess and talents to a new level of radiance. You'll hear more music, more detailed refinement to enjoy and savor. The Nagaoka MP-110 is the cartridge to start with and to keep for a long time.Features:Superfine polished eliptical diamond bonded stylusPowerfull samarium cobalt magnetLightweight aluminum alloy cantilever for high fidelityCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Type: Moving magnetCantilever: Aluminum alloyStylus type: Superfine polished elliptical bonded diamond with 0.4 x 0.7 mil radiiWeight: 6.5 gOutput voltage: 1kHz,5cm/sec: 5mVFrequency response: 20Hz-20kHzChannel balance: 1kHz: > 1.5dBChannel separation: 1kHz: > 23dBRecommended loading: 47k ohmsDynamic compliance: 6.0 x 10-6 cm/dyneStatic compliance: 18 x 10-6 cm/dyneTracking force range: 1.5 - 2.0 g

165 €

Grado Prestige Green 3

Color me awesomeBoth the Black3 and Green3 use a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing. The Green3 are hand selected from Black3 production runs which meet higher test specifications. Approximately 15% of the run usually exhibits these specs and become a Green3.Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.The Black3 & Green3 are all hand assembled by our team in Brooklyn, with some builders having over 25 years of experience. With the recent development of the highly received Lineage Series of cartridges, we were able to have a trickle down of technology and bring a new technique to the Black3 & Green3. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. Our coil winding techniques, using ultra high purity copper wire which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.As in all Grado phono cartridges the Black3 & Green3 are powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Black3 & Green3 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.The development of the Epoch in the Lineage Series gave us an in-depth experience with using an outer housing as a damping device. This led to the creation of a process which de-stresses the chassis and dissipates unwanted energy & resonant frequencies, allowing the desired signal to travel freely.

163 €

Rega Elys 2

Rega's classic MM cartridgeThe Elys 2 is a hand-built stereo moving magnet (MM) cartridge, made in England, and the successor to the popular Super Elys. Every unit is assembled by hand by Rega's skilled technicians with one simple aim: to retrieve as much detail and music from the record as possible. It combines an elliptical stylus, an aluminium cantilever and Rega's three-point mounting, and is easy to recognise by its blue body.Upgrade and factory-fitted optionRega recommends it as an upgrade for the Planar 2 and as an ideal match for the Planar 3 and Planar 6, and it suits every Rega turntable. In Greece the Planar 3 is also available with the Elys 2 factory-fitted. With an output of 6.8 to 7.2 mV it works comfortably with any MM phono stage, from the Fono Mini A2D MK2 and Fono MM MK5 to the phono stages of Rega amplifiers. On turntables from other makers it requires a headshell with three-point mounting.Rebuild and warrantyThrough the Rega rebuild scheme, a worn or damaged cartridge can be returned to a Rega dealer and exchanged for a rebuilt unit with a new cantilever, stylus and pivot pad at a reduced price. The Elys 2 is covered by Rega's Lifetime Limited Warranty against manufacturing defects.

209 €