Thorens TD 201 Black High Gloss

Music Hall mmf-5.3se Walnut

mmf-5.3se TurntableThe Music Hall mmf-5.3se turntable is 2-Speed belt driven audiophile turntable employing the unique dual-plinth construction originated by Music Hall. It features a gorgeous and classic-looking rosenut real wood veneer finish.Distinctive DesignThe distinctive design isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the motor, switch, wiring, and feet which are mounted on the bottom platform.A Complete PackageViso-elastic cones separate the two platforms and provide vibration damping. The mmf-5.3se comes complete with an Ortofon 2M Blue cartridge.Feature List:Music Hall’s unique dual-plinth constructiontop tier 9” carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damperDC synchronous motor for superior speed stability, separately isolated on the lower platformtwo-speed stepped motor pulley for 33 1/3 and 45rpmOrtofon 2M Blue cartridge with replaceable nude elliptical diamond stylusthe cartridge supplied is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free fluid operationalloy platter with soft felt mat screw-on record clamphigh quality gold RCA connectorsdetachable phono cablespecial vibration damping adjustable feetbuilt-in round spirit level for proper levelinglow noise fully manual belt-drive designexcellent instruction manual and easy assemblydust cover and 45rpm adaptor included

1.099 €

Music Hall mmf-3.3 Black

mmf-3.3 TurntableOur first entry-level table utilizing the unique dual-plinth technology!Focus on ComponentsThe 3-speed belt driven table was developed for those seeking a perfectly matched set of features with an uncompromising focus on sound performance.The Complete PackageThe mmf-3.3 comes complete with a tonearm and Ortofon 2M Red cartridge precision mounted.We are pleased to introduce our first entry-level table utilizing the unique dual-plinth technology originated by music hall. The mmf-3.3 embodies the culmination of over 30 years of research, development, and most important of all, listening. The 3-speed belt driven table was developed for those seeking a perfectly matched set of features with an uncompromising focus on sound performance. The 3.3 is constructed using high quality components and comes complete with a tonearm, cartridge mounted, and dust cover.Speed ControlThe 3.3 has a built-in electronic speed control for 33/45/and 78. The platter speed switches from 33 to 45 rpm at the touch of a button. 78 rpm requires the movement of the belt to a different location on the motor pulley, and the use of a different belt, included with the turntable.Carbon Fiber Arm with Bonded Alloy HeadshellThis tonearm is unique to music hall. Bonding the alloy headshell to the carbon arm-tube stiffens and dampens the carbon fiber tube. This construction significantly improves the sound and performance over similar looking one-piece carbon arms. The alloy headshell allows you to securely mount the cartridge to the tonearm without the twist and flex that is common in lesser one-piece carbon arms. Tonearms should not twist/flex as this negatively impacts the cartridge and tonearm’s ability to properly track the record groove. On many one-piece carbon tonearms, you can literally pinch the cartridge end of arm between your thumb and forefinger and twist/flex the arm-tube. Try this with the music hall and the tonearm remains rigid as your fingers begin to ache. The arm itself is housed in a 4-point gimbal bearing construction using Swiss ABEC bearings. This is superior to many of music hall’s competitors who use a lesser 2-point bearing system.Feature List:Music Hall’s unique dual-plinth design – isolating the electronics and motor from the main bearing and tonearm33⅓, 45, or 78rpm speeds at the touch of a buttonElectronic speed controlled DC motor for superior speed stability, isolated on lower plinthCustom carbon fiber tonearm with alloy headshell for superb tracking abilityFlexible internal tonearm wire drawn from high purity copperCounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperHighly regarded Ortofon 2M Red cartridge with replaceable elliptical stylusThe cartridge supplied is properly aligned and mountedHigh precision stainless steel and bronze main bearing assembly for quiet fluid operationSpecial vibration damping adjustable feetHigh quality gold RCA connectors with detachable phono cableFull-size alloy platter and felt matQuick and easy to assembleDust cover and 45rpm adaptor included

649 €

Music Hall mmf-2.3 Black

mmf-2.3 TurntableThe Music Hall mmf-2.3 turntable is a 2-speed belt driven audiophile turntable at a budget price.Focus on ComponentsConstructed using high quality components, the mmf-2.3 has been simplified to focus on the critical components: bearing, motor, and tonearm.The Complete PackageThe mmf-2.3 comes complete with a tonearm and music hall spirit cartridge precision mounted. Feature List:special vibration damping adjustable feettop tier 8.6” carbon fiber tonearm with aluminum headshellfully adjustable VTA, azimuth, and dampened arm lift mechanismtonearm features a 4-point gimbal bearing assembly using ultra-precision ABEC bearingslow noise fully manual belt-drive designseparately isolated DC synchronous motor for superior speed stabilitytwo-speed stepped motor pulley for 33 1⁄3 and 45rpmmusic hall Spirit moving-magnet cartridge with replaceable elliptical stylusthe cartridge supplied is properly aligned and mountedhigh precision stainless steel and bronze bearing assembly for quiet, fluid operationhigh quality gold RCA connectors with detachable phono cablefull-size alloy platter and felt matexcellent instruction manualquick and easy to assembledust cover and 45rpm adaptor

499 €

Music Hall mmf Mark1 Walnut

mmf Mark1 Turntable Sophisticated Sound at an Entry-Level PriceAlthough the Music Hall Mark1 occupies a lower price point than our famous mmf 2.3, the engineering is substantially the same. Roy Hall’s signature sound can be heard in the entire Music Hall range, and the Mark1 is no exception!All-New TonearmOur new all-aluminum, S-shaped design, with a precision aluminum headshell, allows us to achieve the highest possible level of rigidity and internal damping. The tonearm flange is CNC-machined, which allows for accurate mounting of the tonearm to the heavy chassis. VTA is fully adjustable, and it’s a feature almost never seen in this price-range.This no-compromises solution enables us to achieve that signature Music Hall sound. The magnetic anti-skating feature is quite a luxurious one. And the factory-set pre-adjusted and fixed counterweight makes setup a breeze.CartridgeWe have taken care to mount a cartridge that perfectly matches the characteristics of the tonearm. The Mark1 uses a high quality, super fast and dynamic low mass cartridge from one of the leading cartridge manufacturers in Europe, the Ortofon OM 5E. This creates a beautiful, full-bodied sound, which until now has been impossible to achieve in a budget turntable.Feature List:extremely quiet belt drive, 2-speed turntablealuminum die-cast platter33 1⁄3 and 45rpmstatic balanced S-shaped tonearm w/detachable headshellAudio Technica AT3600L moving-magnet cartridge suppliedanti-skating control for increased stereo balance+/- 10% adjustable pitch controldust cover includeddesigned and developed in the US and Francew17.7 x d13.8 x h5.7in12lbs (package)low noise, belt-drive designhigh-gloss piano lacquer finish or walnut veneerhigh quality 8.6” S-shape aluminium tonearmprecision aluminium headshell and VTA adjustmentdynamically balanced and damped counterweightmagnetic anti-skatingAC synchronous motor for superior speed stabilityhigh quality Ortofon OM 5E cartridge properly aligned and mountedprecision stainless steel main bearing sheathed in Tef-lon® for noise-free fluid operationdynamically balanced alloy platter with soft felt mathigh quality gold RCA connectorsspecial vibration-damping adjustable feetdust cover and 45rpm adaptor included

399 €

Rega Planar 3 Black

Replacing the multi award winning and five times What Hi-Fi? Product of the Year (RP3) was never going to be an easy task. It took our team of designers headed up by Rega's Roy Gandy, two years to develop the all new 'Planar 3' following the biggest re-design of the iconic 'Three' model ever seen.Our team have worked tirelessly to improve every aspect of this turntable offering improved ergonomics, usability and first and foremost, sonic performance.The new ‘Planar 3’ is truly a new turntable for 2016 carrying over just two components from the previous model.RB330 tonearm - Designed using the latest 3D CAD & CAM technology, the new RB330 is the culmination of more than 35 years of tonearm design experience.  Featuring a brand new bearing housing, and our latest tonearm tube designed using intelligent redistribution of mass ensure this arm will exhibit fewer points of possible resonance. Extreme stability with almost friction free movement from the new high precision bearing assemblies guarantees to gather more information from your vinyl than ever before. Features:Featuring a new bias assembly, re-designed stiffer vertical bearing housing, integrated arm clip and an improved spring housing with easier to read numbers.Rega made, new low capacitance phono cable with Neutrik plugs,Improved lower friction, precision horizontal and vertical bearingsNew design 100g mild steel balance weight.Plinth - High gloss acrylic, laminated plinth, stiffer and vastly improved appearance, ergonomically positioned power switch.Two plinth finishes at launch: gloss black & gloss whiteDouble braces - Improved thicker 3mm phenolic bottom brace and new metalised skin phenolic top brace.Bearing housing – Re-designed brass main hub central bearing, improved fit and construction reducing stress on the bearing itself.Sub platter - Re-designed sub platter, improved accuracy and improved stiffness.Platter - New float glass ‘Optiwhite’ polished rim 12mm – Improved accuracy in manufacture and stunning looks.Re-designed foot - New improved foot to increase stability and reduce vibration transfer.24V motor - Improved new motor control PCB with integration for the addition of TT-PSU for electronic speed change and improved advanced anti-vibration circuit (sold separately).​​

989 €

Rega Planar 2 White

The new Planar 2 was developed over the past two years alongside the recently released Planar 3. Featuring the brand new RB220 tonearm which is packed with groundbreaking new features.A new 24v, low noise motor, acrylic laminated plinth, newly designed central bearing and so much more. Every feature of this innovative new turntable is designed to extract the maximum amount of information and detail from your vinyl collection. Features:Tonearm - Featuring the brand new RB220 tonearm which is packed with groundbreaking new features. Incorporating new ultra low friction, Rega designed, bespoke, zero play ball bearings (Patent Pending), housed within a brand new, stiffer and lightweight bearing housing which was developed with a new automatic bias setting negating the need for the user to set bias, making it almost completely plug and play apart from simple arm balancing. The new housing also includes an integrated arm clip and uses Rega's latest custom aluminium arm tube.Hub bearing - The Planar 2 has a new 11mm self securing brass bearing (Patent Pending) offering improved fit and less stress on the bearing preventing the transfer of potential energy.Plinth - High gloss acrylic laminated plinth, stiffer and vastly improved appearance with ergonomically positioned power switch. Two plinth finishes at launch: gloss black & gloss whiteMotor - New 24v low noise, low vibration motor assembly and new PCB.Platter - New float glass ‘Optiwhite’ 10mm – Improved accuracy platter.Re-designed feet - New improved foot assembly to increase stability and reduce vibration transfer.Carbon cartridge - supplied as standard on all Planar 2’s for simple plug and play convenience.Motor cover tray - with integrated cooling.Optional lid / plinth protectors - supplied to prevent marks on the plinth and keep it looking its best.Instructions - Easy to use multi-lingual quick start guide for easy set up.Packaging - New improved packaging.​​

669 €

Music Hall Classic

Classic TurntableInspired by turntables of the past, built with the best of today’s technology. The Music Hall classic turntable features a built-in phono pre-amp & phono cartridge, semi-automatic operation (auto-lift and power off), and a dark walnut wood veneer finish.A Complete PackageA 2-speed belt driven turntable that comes complete with a tonearm, mounted music hall spirit cartridge, and built-in phono amp.—The included music hall spirit cartridge has been precision aligned.Spirit CartridgeA quality music hall spirit cartridge is pre-mounted and precision-aligned.Speed ControlA built-in speed control circuit ensures the accuracy of the classic’s 2 speeds.Built-In Phono Pre-amplifierA built-in phono preamplifier allows you to connect directly to your current system.Vibration DampingThe classic features adjustable vibration- damping feet.Feature List:semi-automatic (auto lift & shut off)factory mounted music hall spirit cartridge included aluminum platter with felt matremovable head shelladjustable vibration damping feettouch sensitive electronic speed control 33/45 rpmbuilt-in by-passable phono ampunique uni-pivot tonearm designaccurate line for perfect counterweight positiondust cover

549 €

Music Hall mmf-3.3 Red

mmf-3.3 TurntableOur first entry-level table utilizing the unique dual-plinth technology!Focus on ComponentsThe 3-speed belt driven table was developed for those seeking a perfectly matched set of features with an uncompromising focus on sound performance.The Complete PackageThe mmf-3.3 comes complete with a tonearm and Ortofon 2M Red cartridge precision mounted.We are pleased to introduce our first entry-level table utilizing the unique dual-plinth technology originated by music hall. The mmf-3.3 embodies the culmination of over 30 years of research, development, and most important of all, listening. The 3-speed belt driven table was developed for those seeking a perfectly matched set of features with an uncompromising focus on sound performance. The 3.3 is constructed using high quality components and comes complete with a tonearm, cartridge mounted, and dust cover.Speed ControlThe 3.3 has a built-in electronic speed control for 33/45/and 78. The platter speed switches from 33 to 45 rpm at the touch of a button. 78 rpm requires the movement of the belt to a different location on the motor pulley, and the use of a different belt, included with the turntable.Carbon Fiber Arm with Bonded Alloy HeadshellThis tonearm is unique to music hall. Bonding the alloy headshell to the carbon arm-tube stiffens and dampens the carbon fiber tube. This construction significantly improves the sound and performance over similar looking one-piece carbon arms. The alloy headshell allows you to securely mount the cartridge to the tonearm without the twist and flex that is common in lesser one-piece carbon arms. Tonearms should not twist/flex as this negatively impacts the cartridge and tonearm’s ability to properly track the record groove. On many one-piece carbon tonearms, you can literally pinch the cartridge end of arm between your thumb and forefinger and twist/flex the arm-tube. Try this with the music hall and the tonearm remains rigid as your fingers begin to ache. The arm itself is housed in a 4-point gimbal bearing construction using Swiss ABEC bearings. This is superior to many of music hall’s competitors who use a lesser 2-point bearing system.Feature List:Music Hall’s unique dual-plinth design – isolating the electronics and motor from the main bearing and tonearm33⅓, 45, or 78rpm speeds at the touch of a buttonElectronic speed controlled DC motor for superior speed stability, isolated on lower plinthCustom carbon fiber tonearm with alloy headshell for superb tracking abilityFlexible internal tonearm wire drawn from high purity copperCounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperHighly regarded Ortofon 2M Red cartridge with replaceable elliptical stylusThe cartridge supplied is properly aligned and mountedHigh precision stainless steel and bronze main bearing assembly for quiet fluid operationSpecial vibration damping adjustable feetHigh quality gold RCA connectors with detachable phono cableFull-size alloy platter and felt matQuick and easy to assembleDust cover and 45rpm adaptor included

649 €

Music Hall mmf-2.3 White

mmf-2.3 TurntableThe Music Hall mmf-2.3 turntable is a 2-speed belt driven audiophile turntable at a budget price.Focus on ComponentsConstructed using high quality components, the mmf-2.3 has been simplified to focus on the critical components: bearing, motor, and tonearm.The Complete PackageThe mmf-2.3 comes complete with a tonearm and music hall spirit cartridge precision mounted. Feature List:special vibration damping adjustable feettop tier 8.6” carbon fiber tonearm with aluminum headshellfully adjustable VTA, azimuth, and dampened arm lift mechanismtonearm features a 4-point gimbal bearing assembly using ultra-precision ABEC bearingslow noise fully manual belt-drive designseparately isolated DC synchronous motor for superior speed stabilitytwo-speed stepped motor pulley for 33 1⁄3 and 45rpmmusic hall Spirit moving-magnet cartridge with replaceable elliptical stylusthe cartridge supplied is properly aligned and mountedhigh precision stainless steel and bronze bearing assembly for quiet, fluid operationhigh quality gold RCA connectors with detachable phono cablefull-size alloy platter and felt matexcellent instruction manualquick and easy to assembledust cover and 45rpm adaptor

499 €