ATC SCM20A Pro MkII (Pair)

ATC SCM25A Pro mk II (Pair)

The ATC SCM25A Pro Mk2 are compact active 3-way studio monitors for demanding near-field monitoring. They deliver clear midrange, high output and extended bass from a cabinet that fits on a desk or console.3-way design with the ATC midrange domeThe SM75-150 soft-dome midrange handles the critical 380 Hz to 3.5 kHz region where voices and most instruments sit. The 164 mm woofer extends bass to 47 Hz (-6 dB), and a pair reaches 109 dB continuous and 115 dB peak SPL.New tweeter in the Mk2The Mk2 adds the ATC SH25-76S dual-suspension tweeter, extending response to 25 kHz and reducing distortion. Wide dispersion keeps the stereo image stable across a large listening area.MOSFET class A/B amplificationThe built-in MOSFET class A/B amplifier delivers 150 W to the bass, 60 W to the mid and 32 W to the high section, with THD+N below 0.003%. 4th-order Linkwitz-Riley filters include all-pass phase compensation. Input sensitivity and bass lift (0 to +3 dB) are adjustable. Hand-built in England with a 6-year warranty.

10.500 €

ATC SCM45A Pro (Pair)

The ATC SCM45A Pro are mid-size active 3-way monitors in a horizontal cabinet. They are designed for critical near-field monitoring in any control room, LCR monitoring in medium rooms and surround channels in medium to large rooms.Twin 6.5″ woofersBass comes from two hand-built 164 mm short-coil woofers with carbon-paper cones. Response extends to 42 Hz (-6 dB) with up to 112 dB continuous SPL, from a cabinet that fits on the console.75 mm midrange dome and «S-Spec» tweeterThe ATC 75 mm soft-dome midrange sits at the centre of the cabinet with the 25 mm dual-suspension «S-Spec» tweeter. The symmetrical layout gives consistent ±80° horizontal dispersion and a clear centre image.MOSFET class A/B tri-ampThe built-in amplifier delivers 150 W to the bass, 60 W to the mid and 25 W to the high section. 4th-order filters at 380 Hz and 3.5 kHz include phase compensation. Rear-panel controls adjust input sensitivity (0 to -6 dB) and bass boost (0 to +3 dB at 40 Hz).

13.100 €

Barefoot Footprint 01 Gen2 (Pair)

The Footprint®01 Gen2 is a complete reinvention of one of Barefoot Sound’s most acclaimed monitors, redesigned from the ground up to deliver even greater precision, power, and transparency. While the original Footprint®01 set a high standard for compact professional monitors, the Gen2 surpasses it in every meaningful way, both technically and sonically. This next generation model introduces a fully tri-amplified 3-way architecture, providing dedicated Class D amplification for each driver to ensure optimal performance, headroom, and efficiency across the frequency spectrum. At the heart of the Footprint®01 Gen2 is a suite of newly developed Barefoot drivers, including a 1-inch dual ring radiator tweeter, a 5-inch aluminum cone midrange driver, and dual 8-inch aluminum cone woofers integrated into the cabinet using the proprietary Dual-Force™ Technology coupling system. Engineered for extended linear excursion, reduced distortion, and improved transient response, these custom drivers deliver tighter imaging and a more revealing soundstage. The new DSP platform features SPOC™ (SPectrally Optimized Conversion), Barefoot’s patented technology that introduces analog crossover filtering before digital conversion, preserving high frequency detail and significantly improving signal to noise ratio. This allows the Gen2 to achieve higher resolution, improved clarity, and ultra low latency for an unmatched mixing and monitoring experience. To support all this technological advancement, the cabinet itself has been acoustically refined with increased internal volume, optimized bracing, and enhanced damping, housed in a sealed enclosure with a sleek industrial finish. Together, these innovations make the Footprint®01 Gen2 not just a worthy successor but a truly next level monitor that brings flagship performance to a wider range of studios and creators. Whether you’re mixing in stereo or building a 7.1.4 immersive studio, the Barefoot Sound Footprint®01 Gen2 delivers elite performance in a footprint that’s right-sized for today’s production environments. It’s the perfect fusion of next-generation engineering, real-world versatility, and Barefoot’s legendary sonic signature.

4.675 €

New

PMC 6

The PMC6 is packed with innovation and providing the same sonic signature as our renowned larger monitors, it’s ideal for smaller control rooms or for use in larger immersive systems, where its astounding resolution allows critical mix decisions to be made with absolute confidence.With 20mm of excursion, the bespoke 6-inch bass driver is designed specifically to integrate with our latest ATL™ bass-loading and Laminair™ airflow technologies. The combination outperforms most 8-inch monitors, offering unparalleled bass extension, headroom, dynamics, and low distortion at all levels. The high end is courtesy of a one-inch precision-built fabric soft-dome tweeter, with a shallow waveguide that creates wide, tonally consistent dispersion and rock-solid imaging. Both the bass and treble drivers are precisely and individually controlled by a pair of 200W ultra-low-distortion, high-damping-factor Class-D amplifiers.

6.590 €

Genelec 8351 B

The upgraded 8351B now offers increased SPL, additional room compensation EQs, equalised delay and enhanced HF response. Offering the same extraordinary imaging and uncoloured precision of its smaller 8331A and 8341A siblings, the 8351B provides even greater LF extension, while its higher maximum SPL enables longer listening distances.

4.033 €

Focal Trio 11 Be

As well as new speaker drivers (a 5” midrange and a 10” subwoofer) with high efficiency and power handling, the Trio11 Be monitor enjoys all of Focal's very latest technologies when it comes to acoustics and electronics: TDM and NIC technologies; optimized vents that promote dynamic control and perfect bass definition; high excursion, enabling even more linearity of the subwoofer...Thanks to its class G amplification, Trio11 Be delivers a high SPL (118dB at 1m) and offers great versatility of use and installation configurations in nearfield AND midfield applications. A key asset, always coming along with extremely precise sound reproduction and stereo image. With an extended bandwidth (30 Hz-40 kHz), this loudspeaker is also composed of a 3-way monitor and a 2-way monitor, just like Trio 6 Be which lets you check the mix transfer sound quality thanks to FOCUS mode.With Trio11 Be, power and versatility are waiting for you! Feel the difference!Key PointsHigh SPL: 118 dB @ 393/8'' (1m).FOCUS Mode: two monitors in one with the remote switchover.Pure Beryllium inverted dome tweeterVery low directivity, linearity, dynamics.‘W’ composite sandwich cone on woofer and subwoofer:Neutral sound, no distortion.Bass, mid-bass and treble settings on rear panel: optimum acoustical integration.Optimized decoupling of the midrange speaker driver thanks to silent blocks.Ultra-low distortion and noise.Meticulous Finishes The cabinet developed and manufactured by Focal in its cabinetry workshop in Bourbon-Lancy in France, consists of two side panels and a body in MDF measuring between 13/16” (21mm) and 13/16” (30mm) thick: an indicator of the quality of each material chosen, combined with careful attention to the finishes.Trio11 Be has two side panels in a natural dark red burr ash veneer and a black central body, for an aesthetic rendering that is also discreet and hard-wearing.FOCUS mode 2 MONITORS IN 1 Trio11 Be combines two monitors in a single enclosure. The 3-way monitor provides a flawless control of the entire audio spectrum (30 Hz – 40 kHz). The 2-way monitor, with a frequency response of 90 Hz to 20 kHz, makes it possible to check the transfer quality of mixes on systems with a limited frequency response in the bass (televisions, computers, cars, etc.).

3.399 €

Adam S3H

The S3H builds on the successes of ADAM Audio’s most popular studio monitors, the S3A and S3X-H, and, like its predecessors, sets new standards in terms of technical innovation and design. The dual 7-inch bass drivers, powered by a 500 W Class D amplifier, offer flawless reproduction of frequencies all the way down to 30 Hz. ADAM Audio’s newly developed DCH, a 4-inch hybrid dome/cone mid-range driver, is powered by a 300 W Class D amplifier and handles audio above 250 Hz and below 3 kHz, its leading-edge hybrid design offering the sonic advantages of both cone and soft-dome drivers in a single, one-piece unit. Frequencies above 3 kHz are routed to the innovative combination of the S-ART treble driver (each handmade at ADAM Audio’s Berlin factory), the new precision HPS waveguide, and a 50 W Class A/B amplifier. The result of all this innovation is a beautifully transparent three-dimensional soundscape, with an extensive sweet spot. The S Series’ custom-designed DSP optimizes the loudspeaker crossovers to create linear responses for the entire range, as well as providing user equalization and in-room tuning/voicing functions. A unique feature of the S3H’s DSP options is a built-in factory EQ preset that emulates the response of ADAM Audio’s legendary S3A monitor. The DSP also handles the limiter-based high-frequency driver protection, processes the signals from the AES3 digital inputs, and will in time facilitate various expansion options. Software updates can be carried out with ease via the associated USB port, which also allows users to connect computers and control the speakers’ DSP functions via a software front-end. With its massively powerful amplification and three-way design (optimally configured for use horizontally), the S3H was conceived as a midfield monitor, but can be employed equally well in more compact listening environments. As with all ADAM Audio designs, the sound is punchy but musical, with crystal-clear reproduction of the all-important mid-range. The S3H’s wide-ranging frequency response, its power amps’ instantly available, plentiful headroom, and the lack of need for additional subwoofers should appeal to any audio professional looking for a stand-alone, full-frequency active solution for their recording studio, one which provides equally detailed audio information at any volume setting, loud or quiet. Whatever your preferred output level, the S3H’s vibrant authenticity is a spur to creativity for producers, engineers and musicians everywhere, and its sound remains remarkably unfatiguing, even when working uninterrupted for extended periods.

3.380 €

Barefoot MicroMain 45 (Pair)

As a 3-way active monitor, the Barefoot MicroMain45 utilizes the same amplifier, signal path and driver technology of the MiniMain12. Downsizing the hefty 130+ lbs size of the original to a tight 35+ lbs package, the MicroMain45 features an 8” aluminum woofer, two x 2.5” aluminum midranges and a 1” tweeter. With a bass response of -3dB @ 40Hz, frequency response of 40Hz – 45 kHz (±3dB) and 53Hz – 40kHz (±1dB), this is the sound that Barefoot enthusiasts have come to know and love.Founded on the idea of creating a new type of audio monitor, Barefoot Sound was started by Thomas Barefoot to meet the growing needs of small to mid-sized project studios. By offering well-designed monitors that could take the space of several sets of speakers, audio enthusiasts are able to have more room for other types of gear, while still having an impeccable monitoring system. The Barefoot Sound MM45 monitors follow in this lineage of incredible speakers like the MicroMain27 and MicroMain35.MEME™ Technology: Despite the advantages of high resolution monitors, Thomas Barefoot realizes that many engineers still use their NS10M’s † and mix cubes as secondary references. These speakers have long traditions and people find them familiar and useful for focusing in on certain aspects of their mix. However, crowding one’s console with those extra boxes degrades the sound field of the primary reference monitors. Not to mention, they are no longer manufactured, they need amplifiers, cable runs, and they consume more studio space.The solution is to make the MM45 sound and translate like those speakers. With the turn of a knob one can switch from the MicroMain45′s brutally revealing “Flat” response to the warmer and sweeter “Hi-Fi” setting, generically emulating the sound of some high end consumer audio gear. More specifically the “Old School” setting closely emulates the sound of the NS10M nearfield, while the “Cube” setting emulates the mid-centric sound of classic mix cubes The idea is not to perfectly replicate every subtle quirk of these venerable old speakers.That would be impossible. But the MM45 can capture the essence of how they behave and translate, modeling their frequency, phase and transient responses, dynamic compression and even specific distortion components. If you know how to work on these speakers you will feel very comfortable working on the new MM45′s emulation settings.Specifications:Controls:: Input level stepped attenuator, Equalization contourInput Impedance:: 50k OhmFrequency Response:: 40Hz – 45kHz (±3dB),53Hz – 40kHz (±1dB)Bass Response:: -3 dB @ 35Hz, Q = 0.707Slope = 12 dB/octaveCabinet:: 14 liters total internal volume, Sealed woofer and midrange enclosures, Machined aluminum baffle plate, Long fiber wool acoustic damping throughoutCrossover Frequencies:: 600 / 3600 HzTweeter:: 1″ ring radiator, Advanced geometry motor, Rear waveguide chamberAmplifier: 180W HypexMidranges:: 2 x 2.5″ aluminum cones, Advanced geometry motor, +/- 2 mm linear excursionAmplifier: 180W HypexSubwoofers:: 8″ aluminum cone with high linearity motor, +/- 13 mm linear excursionAmplifier: 250W HypexAC Power Input:: Nominal 115 VAC or 230 VAC selectablePower Consumption:: Idle: 18W, Maximum: 400WWeight:: Speaker: 37.5 lbs each (17 kg)Shipping: 47 lbs each (21 kg)Dimensions HxWxD:: Cabinet: 11.0 x 15.5 x 10.75 inches (279 x 394 x 273 mm)Overall: 11.0 x 15.5 x 11.0 inches (279 x 394 x 279 mm) 

7.825 ,21 €