Cables and Plugs
Lower-Dispersion Higher Purity Fiber - Low-Jitter (Digital Timing Errors) - Finely Polished Optical Interface - 3.0m & Longer - In-Wall Rated PVCWhile, thanks to HDMI, Toslink is not so often used to connect a DVD player to an A/V receiver, Toslink connectors are common on cable-boxes, TV sets, subwoofers, all sorts of products. And now, the 3.5mm Mini Optical connector, also somewhat incorrectly known as Mini-Toslink, is everywhere … from the 3.5mm dual-purpose headphone jack on a Mac laptop, to inputs on some of the finest portables.For these many reasons, AudioQuest has refined and renewed our line of serious high performance OptiLink cables. All models and all lengths are now available Toslink to Toslink and Toslink to 3.5mm Mini Optical. LOWER-DISPERSION HIGHER-PURITY FIBER CONDUCTORSThe problem with optical fiber transmission is that dispersed light does get through the Toslink cable, but only after it has taken a longer path, like a pool ball bouncing off the side-rails, causing it to arrive later. This delayed part of the signal prevents the computer charged with decoding the information from being decoded properly, or even at all. This reduced bandwidth is a measurable signature of light being dispersed by a fiber. The punch line: The less dispersion in the fiber, the less distortion in the final analog audio signal presented to our ears.
Instrument cable - 2*6,3 mm right angle mono plug - Cotton covered flexible PVC jacket - Black/White color finishing - 7mm external diameter - 2 pcs set - Length: 15 cm
Top notch 1m. balanced Mic/Line cable Mogami MOD. 2549-00, with excellent shielding combined with very low capacitance values.The capacitance value between Hot and Cold conductors is 11 pF/m (much lower than the vast majority of single channel microphone - line cables), while the capacitance value between each signal conductor and shield lies at 76 pF/m. The connectors used are Neutrik gold plated.
Top notch 3m. balanced Mic/Line cable Mogami MOD. 2549-00, with excellent shielding combined with very low capacitance values.The capacitance value between Hot and Cold conductors is 11 pF/m (much lower than the vast majority of single channel microphone - line cables), while the capacitance value between each signal conductor and shield lies at 76 pF/m. The connectors used are Neutrik gold plated.
Cable for electronic devices - Ø 6,3 mm stereo jack - Ø 3,5 mm stereo jack
Cable for electronic devices - Ø 6,3 mm stereo jack - Ø 3,5 mm stereo jack -3m
Top notch 5m. balanced Mic/Line cable Mogami MOD. 2549-00, with excellent shielding combined with very low capacitance values.The capacitance value between Hot and Cold conductors is 11 pF/m (much lower than the vast majority of single channel microphone - line cables), while the capacitance value between each signal conductor and shield lies at 76 pF/m. The connectors used are Neutrik gold plated.
The superior quality of Wireworld’s exclusive Gold-Tube™ RCA plugs and oxygen-free copper conductors produce real improvements in sound quality. BNC's are an optional termination.DESIGN: CoaxialSIGNAL CONDUCTORS: 24AWG | 0.2 sq. mmCONDUCTOR MATERIAL: Oxygen-Free CopperINSULATION: Gas Injected PEPLUG CONTACTS: Silver + gold platedIf you need custom termination, please specify in the shopping cart comment box what plugs you require at the beginning and at the end of the cable.
Instrument cable - 2*6,3 mm right angle mono plug - Cotton covered flexible PVC jacket - Black/White color finishing - 7mm external diameter - 2 pcs set - Length: 15 cm
The DIGI-COUPLER 75 Ohm is our top level SPDIF digital audio interconnect cable, though is equally suited for Video and HF signal transport at a maximum performance level.The DIGI-COUPLER 75 Ohm has been specially designed bearing the highest possible transmission quality of 75 Ohm impedance level SPDIF consumer format digital audio in mind, and is aimed at the critical audiophile as well as the professional.The DIGI-COUPLER 75 Ohm’s special design covers all aspects required for a flawless and reliable transmission of SPDIF digital audio at short range as well as across large studio distances and allows for notable improvements in your audio quality.The cable’s strict HF design likewise benefits the transport of Video and HF signals well into the GigaHertz range.Features:The DIGI-COUPLER 75 Ohm features a very constant and precise 75 Ohm impedance: 75 Ohm ± 0.5 Ohm up to 3 GHz.materialSilverplated Copper OFCproduct categoryaudio video - 75 Ohmproduct categoryinterconnect - Unbalanced, Digitalproduct categoryvideocable typeTriaxial, Superscreenedconductor materialCore: High purity Matched Crystal OFCIntermediate conductor and Screen: High purity dense Silver coated high purity Matched Crystal OFCdesign purposeHighest quality level: Digital audio (SPDIF) interconnect; Interconnect for Video and HF signal transport; Unbalanced measuring equipment interconnect; General purpose and hometheatre unbalanced interlinkeff conductorCore: 0.283 mm² / Core: AWG 22.6 / Core: 1; Intermediate conductor: Al foil + 128 + Al foil + 128; Screen: Al foil + 192external diameter8.2 mm.jacket colorsGold toneresistanceCore: 5.92 Ohm/100 m.; Intermediate conductor: 0.814 Ohm/100 m.; Screen: 0.747 Ohm/100 m.capacitanceCore-Intermediate conductor: 56.2 pF/m.;Intermediate conductor-Screen: 470 pF/m.characteristic impedance75 OhminsulationCore: PE foam; Intermediate conductor: PE; Jacket: HULLIFLEX ® / 300 Vrms min.connector typesOur BNC type BNC - 9.0 and our RCA type C - 8.4; Custom mountable on ordered lengths.standard sales units100 m. reels; Single packed with RCA or BNC (unbalanced) connectors in 0.8, 1.0, 1.2 and 1.5 m. lengths; Other lengths: please consult your van den Hul dealer or the van den Hul distributor in your country.remarksIs a technically extended version of our The TRIAXIAL Professional 75 Ohm.RCA and BNC connector terminated units are equipped with a ground-end marking sticker.
The DIGI-COUPLER 75 Ohm is our top level SPDIF digital audio interconnect cable, though is equally suited for Video and HF signal transport at a maximum performance level.The DIGI-COUPLER 75 Ohm has been specially designed bearing the highest possible transmission quality of 75 Ohm impedance level SPDIF consumer format digital audio in mind, and is aimed at the critical audiophile as well as the professional.The DIGI-COUPLER 75 Ohm’s special design covers all aspects required for a flawless and reliable transmission of SPDIF digital audio at short range as well as across large studio distances and allows for notable improvements in your audio quality.The cable’s strict HF design likewise benefits the transport of Video and HF signals well into the GigaHertz range.Features:The DIGI-COUPLER 75 Ohm features a very constant and precise 75 Ohm impedance: 75 Ohm ± 0.5 Ohm up to 3 GHz.materialSilverplated Copper OFCproduct categoryaudio video - 75 Ohmproduct categoryinterconnect - Unbalanced, Digitalproduct categoryvideocable typeTriaxial, Superscreenedconductor materialCore: High purity Matched Crystal OFCIntermediate conductor and Screen: High purity dense Silver coated high purity Matched Crystal OFCdesign purposeHighest quality level: Digital audio (SPDIF) interconnect; Interconnect for Video and HF signal transport; Unbalanced measuring equipment interconnect; General purpose and hometheatre unbalanced interlinkeff conductorCore: 0.283 mm² / Core: AWG 22.6 / Core: 1; Intermediate conductor: Al foil + 128 + Al foil + 128; Screen: Al foil + 192external diameter8.2 mm.jacket colorsGold toneresistanceCore: 5.92 Ohm/100 m.; Intermediate conductor: 0.814 Ohm/100 m.; Screen: 0.747 Ohm/100 m.capacitanceCore-Intermediate conductor: 56.2 pF/m.;Intermediate conductor-Screen: 470 pF/m.characteristic impedance75 OhminsulationCore: PE foam; Intermediate conductor: PE; Jacket: HULLIFLEX ® / 300 Vrms min.connector typesOur BNC type BNC - 9.0 and our RCA type C - 8.4; Custom mountable on ordered lengths.standard sales units100 m. reels; Single packed with RCA or BNC (unbalanced) connectors in 0.8, 1.0, 1.2 and 1.5 m. lengths; Other lengths: please consult your van den Hul dealer or the van den Hul distributor in your country.remarksIs a technically extended version of our The TRIAXIAL Professional 75 Ohm.RCA and BNC connector terminated units are equipped with a ground-end marking sticker.
The DIGI-COUPLER 75 Ohm is our top level SPDIF digital audio interconnect cable, though is equally suited for Video and HF signal transport at a maximum performance level.The DIGI-COUPLER 75 Ohm has been specially designed bearing the highest possible transmission quality of 75 Ohm impedance level SPDIF consumer format digital audio in mind, and is aimed at the critical audiophile as well as the professional.The DIGI-COUPLER 75 Ohm’s special design covers all aspects required for a flawless and reliable transmission of SPDIF digital audio at short range as well as across large studio distances and allows for notable improvements in your audio quality.The cable’s strict HF design likewise benefits the transport of Video and HF signals well into the GigaHertz range.Features:The DIGI-COUPLER 75 Ohm features a very constant and precise 75 Ohm impedance: 75 Ohm ± 0.5 Ohm up to 3 GHz.materialSilverplated Copper OFCproduct categoryaudio video - 75 Ohmproduct categoryinterconnect - Unbalanced, Digitalproduct categoryvideocable typeTriaxial, Superscreenedconductor materialCore: High purity Matched Crystal OFCIntermediate conductor and Screen: High purity dense Silver coated high purity Matched Crystal OFCdesign purposeHighest quality level: Digital audio (SPDIF) interconnect; Interconnect for Video and HF signal transport; Unbalanced measuring equipment interconnect; General purpose and hometheatre unbalanced interlinkeff conductorCore: 0.283 mm² / Core: AWG 22.6 / Core: 1; Intermediate conductor: Al foil + 128 + Al foil + 128; Screen: Al foil + 192external diameter8.2 mm.jacket colorsGold toneresistanceCore: 5.92 Ohm/100 m.; Intermediate conductor: 0.814 Ohm/100 m.; Screen: 0.747 Ohm/100 m.capacitanceCore-Intermediate conductor: 56.2 pF/m.;Intermediate conductor-Screen: 470 pF/m.characteristic impedance75 OhminsulationCore: PE foam; Intermediate conductor: PE; Jacket: HULLIFLEX ® / 300 Vrms min.connector typesOur BNC type BNC - 9.0 and our RCA type C - 8.4; Custom mountable on ordered lengths.standard sales units100 m. reels; Single packed with RCA or BNC (unbalanced) connectors in 0.8, 1.0, 1.2 and 1.5 m. lengths; Other lengths: please consult your van den Hul dealer or the van den Hul distributor in your country.remarksIs a technically extended version of our The TRIAXIAL Professional 75 Ohm.RCA and BNC connector terminated units are equipped with a ground-end marking sticker.
Construction of the OPT-1 begins with medical-grade light conducting fiber. The fiber is then encapsulated in a thermal barrier that inhibits heat warping of the light-carrying fiber. A mechanical damping outer barrier is also applied to further protect the cable from damage. The ends are then cold-polished helping to further reduce the incidence of reflections. With such excellent light transfer characteristics, the result is a sound which is full, relaxed and transparent.
Microphone cable XLR-XLR, length 20 meters
Microphone cable XLR-XLR, length 10 meters
Microphone cable XLR-XLR, length 15 meters
Microphone cable XLR-XLR, length 5 meters
Microphone cable XLR-XLR, length 3 meters
Cable line 2 rca male - 2 XLR male 5 meters
Καλώδιο XLR male σε TRS
Microphone cable XLR-XLR, length 0.5 meters
Cable line 2 rca male - 2 XLR male 3 meters
Microphone cable XLR-XLR, Neutrik, length 1 meter
Καλώδιο line 2xXLR Male σε 2xJACK mono 5 μέτρα
Cable XLR M - XLR F with Neutrik connectors and cable Cordial CMFLEX 222 with dimension 5m.
Cable XLR M - XLR F White in color with Neutrik connectors and cable Cordial White with dimension 2.5m.
Cable XLR M - XLR F with Neutrik connectors and cable Cordial upholstered with dimension 5m.
d+ series bring the highest quality and a cool designed in your sound system such as DJ gears, audio interface, speaker, mixer, effector, synthesizer and all sound gears.About the product planning for the d+ series, we contemplated the best combination of materials and the structure for today’s music and situations.You might already have seen d+ class B series somewhere. That’s why they always have a desire to improve the sound quality and the cable’s transmission influences the total sounds. Many professionals are using the d+ series and you can easily get the goodness on your sound system.Specifications:Structure: Flat (Inverted concentric structure) Conductor: 18AWG high purity oxygen-free copperInsulator: Polyolefin Exterior sheath: Flex PVC Housing: PBT + Glass FiberTerminal: RCA plug , 1 /4 inch phone plug , 1/4TRS plug , XLR plug (24K gold-plated bronze alloy coating )
d+ series bring the highest quality and a cool designed in your sound system such as DJ gears, audio interface, speaker, mixer, effector, synthesizer and all sound gears.About the product planning for the d+ series, we contemplated the best combination of materials and the structure for today’s music and situations.You might already have seen d+ class B series somewhere. That’s why they always have a desire to improve the sound quality and the cable’s transmission influences the total sounds. Many professionals are using the d+ series and you can easily get the goodness on your sound system.Specifications:Structure: Flat (Inverted concentric structure) Conductor: 18AWG high purity oxygen-free copperInsulator: Polyolefin Exterior sheath: Flex PVC Housing: PBT + Glass FiberTerminal: RCA plug , 1 /4 inch phone plug , 1/4TRS plug , XLR plug (24K gold-plated bronze alloy coating )
Cable XLR M - XLR F with Neutrik connectors and cable Cordial CMFLEX 222 with dimension 3m.
d+ series bring the highest quality and a cool designed in your sound system such as DJ gears, audio interface, speaker, mixer, effector, synthesizer and all sound gears.About the product planning for the d+ series, we contemplated the best combination of materials and the structure for today’s music and situations.You might already have seen d+ class B series somewhere. That’s why they always have a desire to improve the sound quality and the cable’s transmission influences the total sounds. Many professionals are using the d+ series and you can easily get the goodness on your sound system.Specifications:Structure: Flat (Inverted concentric structure) Conductor: 18AWG high purity oxygen-free copperInsulator: Polyolefin Exterior sheath: Flex PVC Housing: PBT + Glass FiberTerminal: RCA plug , 1 /4 inch phone plug , 1/4TRS plug , XLR plug (24K gold-plated bronze alloy coating )
Cable Jack Stereo Male 6.3mm - XLR Female to Neutrik connectors and Cordial CMX222 cable 5m dimension.
Microphone cable XLR-5 M -> XLR-3F with 3P Female XLR -> 3P Male XLR PROEL metal housing connectors, 3 metres.
Cable Jack Stereo Male 6.3mm-XLR Male to Neutrik connectors and cable Cordial CMX222 with dimension 2.50m.
d+ series bring the highest quality and a cool designed in your sound system such as DJ gears, audio interface, speaker, mixer, effector, synthesizer and all sound gears.About the product planning for the d+ series, we contemplated the best combination of materials and the structure for today’s music and situations.You might already have seen d+ class B series somewhere. That’s why they always have a desire to improve the sound quality and the cable’s transmission influences the total sounds. Many professionals are using the d+ series and you can easily get the goodness on your sound system.Specifications:Structure: Flat (Inverted concentric structure) Conductor: 18AWG high purity oxygen-free copperInsulator: Polyolefin Exterior sheath: Flex PVC Housing: PBT + Glass FiberTerminal: RCA plug , 1 /4 inch phone plug , 1/4TRS plug , XLR plug (24K gold-plated bronze alloy coating )
Cable Jack Stereo Male 6.3mm - XLR Female to Neutrik connectors and Cordial CMX222 cable 2.50m dimension.
Cable Jack Stereo Male 6.3mm - Jack Stereo Male 6.3mm with Neutrik connectors and cable Cordial CMX222 with dimension 2.50m.
Cable Jack Stereo Male 6.3mm-XLR Male to Neutrik connectors and cable Cordial CMX222 with dimension 5m.
Cable XLR M - XLR F with Neutrik connectors and cable Cordial CMFLEX 222 with dimension 1,5 m.
Kimber's D-60 has proven to be the worldwide reference for digital cables. Featuring a unique Hyper-pure silver conductor contained in an air-articulated fluorocarbon dielectric with twin helically wound shields to protect it from RF interference. The remaining layers and technology are proprietary. Termination options include BNC and RCA type connectors. Composite, component, and RGB+HV formats are available. (Cp) parallel capacitance: 55.20 pF 20 kHz(Ls) series inductance: 0.502 µH 20 kHz(Rdc) dc loop resistance: 0.115 Ω(Xt) total reactance: 0.0032 Ω 20 kHzFrequency response ± 0.5 dB dc - 40 MHz
XLR male to 6.3 mm Jack male stereo.
Μicrophone Cable 1XLR3M->1J3P63M 0.6m.
Cable 1XLR3M->1J3P63M 1m.
Μicrophone Cable 1XLR3M->1J3P63M 5m.
Μicrophone Cable 1XLR3M->1XLR3F 1m.