Cyber Week

The Duo seems to exude an air of accomplishment. It’s a solid, lightweight piece of tech that just looks plain good... A rich and rewarding listening experience I just can’t tear myself away from... Few other options out there can match this kind of listening experience, which to put it mildly, is pretty amazing.Whether you’re dusting off your record collection or embracing analogue through the vinyl revival, there’s a unique experience to be had from the moment you drop the needle on your favourite album. To preserve the unique warmth of the vinyl sound, the Duo phono preamplifier has been carefully designed with a state-of-the-art switch mode power supply and a new surface mounted circuit board layout to reduce unwanted noise.Due to the low-level signals created by a turntable, not all hi-fi amplifiers will let you connect directly to a record player. The phono preamplifier boosts this signal to something a power amplifier can work with. The challenge at this stage though is that noise can easily be added.This is why we’ve designed the Duo around exceptional components that deliver the warm and detailed sound that’s synonymous with vinyl, all without distorting the signal from your moving magnet cartridge turntable. The switch mode power supply improves performance by switching outside of audible frequency to drastically reduce hum and new circuit board layout uses surface-mount components to reduce noise.Enjoy the warmth of vinyl privately thanks to Duo’s integrated headphone output. Uniquely, we integrated a 6.35mm headphone jack directly into the phono stage, so you can still enjoy your records when there’s no option to play out loud.The integrated headphone output also means no need to turn on your amplifier just to power your headphones, resulting in a more eco-friendly listening experience.If some records in your collection are a little worse for wear, the subsonic filter will help to eliminate low frequency rumbles that can be caused by imperfections within your vinyl. Combine this with the balance control for handling potential cartridge imbalances in your record player (that can cause a difference between the left and right channels) and the result is a detailed experience with accurate soundstage.The Duo phono preamplifier is green at heart with less than half a watt standby power consumption and auto power down feature if the unit isn’t used after a 20 minute period. This in turn gives the unit the same worldwide voltage for compatibility wherever you are in the world.Specifications:MAX POWER CONSUMPTION: 10WCARTRIDGE SUPPORT: Moving Magnet | Moving CoilGAIN @ 1KHZ: MM: 39dB | MC: 60dBNOMINAL OUTPUT: 300mVSENSITIVITY FOR NOMINAL OUTPUT: MM: 3.35mV | MC: 305uVEQUIVALENT INPUT NOISE (A-WEIGHTED): MM: ~0.09uV | MC: ~0.08uVRIAA CURVE ACCURACY: +/- 0.3dB 30Hz-50HzSIGNAL TO NOISE RATIO GROUNDED INPUTS REF. 1V OUTPUT (20HZ-20KHZ BW): MM: >90dB | MC: >70dBTHD+N 1KHZ (20-20KHZ BW): MM: 85dB | MC: 75dBDIMENSIONS (H X W X D): 48 x 215 x 159 mm (1.9 x 8.5 x 6.2")WEIGHT: 0.95kg (2.1lbs)

Enjoy every last detail from your vinyl collection with our highest quality moving magnet phono stage, the Solo Phono Preamplifier. Whether you’re dusting off your record collection or embracing analogue through the vinyl revival, there’s a unique experience to be had from the moment you drop the needle on your favourite album. To preserve the unique warmth of the vinyl sound, the Solo phono preamplifier has been carefully designed with a state-of-the-art switch mode power supply and a new surface mounted circuit board layout to reduce unwanted noise. Due to the low-level signals created by a turntable, not all hi-fi amplifiers will let you connect directly to a record player. The phono preamplifier boosts this signal to something a power amplifier can work with. The challenge at this stage though is that noise can easily be added. This is why we’ve designed the Solo around exceptional components that deliver the warm and detailed sound that’s synonymous with vinyl, all without distorting the signal from your moving magnet cartridge. The switch mode power supply improves performance by switching outside of audible frequency to drastically reduce hum and new circuit board layout uses surface-mount components to reduce noise. If some records in your collection are a little worse for wear, the subsonic filter will help to eliminate low frequency rumbles that can be caused by imperfections within your vinyl. Combine this with the balance control for handling potential cartridge imbalances in your record player (that can cause a difference between the left and right channels) and the result is a detailed experience with accurate soundstage. The Solo phono preamplifier is green at heart with less than half a watt standby power consumption and auto power down feature if the unit isn’t used after a 20 minute period. This in turn gives the unit the same worldwide voltage for compatibility wherever you are in the world. Specifications: MAX POWER CONSUMPTION: 10W GAIN @ 1KHZ: 39dB NOMINAL OUTPUT: 300mV SENSITIVITY FOR NOMINAL OUTPUT: 3.35mV EQUIVALENT INPUT NOISE (A-WEIGHTED): ~0.09uV RIAA CURVE ACCURACY: +/- 0.65dB 30Hz-20kHz SIGNAL TO NOISE RATIO GROUNDED INPUTS REF. 1V OUTPUT (20HZ-20KHZ BW): >90dB THD+N 1KHZ (20-20KHZ BW): 30dB CROSSTALK @10KHZ: >85dB DIMENSIONS (H X W X D): 48x176x132 (1.9x6.9x5.2”) WEIGHT: 0.68kg/1.5lbs

The AXA35 boasts 35 watts of power per channel, an integrated moving magnet phono stage for turntable enthusiasts, a white display screen, and a ¼ inch headphone socket for private listening sessions. Specifications: POWER OUTPUT: 35 Watts (into 8 Ohms) THD (UNWEIGHTED):  50 MAX. POWER CONSUMPTION: 260W BASS/TREBLE CONTROLS: Shelving, ultimate boost/cut +/- 10dB @ 100Hz and 10kHz STANDBY POWER CONSUMPTION: 

Whether you play guitar, bass, keyboards or another stringed instrument, you'll need a direct box that won't diminish your instrument's tone, like the Direct Box Active and Direct Box Passive from Warm Audio.  Built around world-famous CineMag USA Transformer topology and engineering, like no other DI Boxes in the world. Constructed with top-tier discrete components housed in rugged aluminum chassis' that include switches, knobs and connectors that are all designed to withstand heavy abuse on the road or in the studio. Made With USA Custom CineMag Transformers Every aspect of our direct boxes are designed for maximum sonic integrity, from the custom-wound CineMag USA transformer to the rugged metal knob and switches.  You can expect warm, rich tone even after long cable runs, and the extruded aluminum enclosure ensures a long life span.  When you need to convert an instrument-level signal to mic-level, with sonic quality as your top priority, you'll be well-served with the Direct Box Active and Direct Box Passive from Warm Audio. New DI Box Experience Warm Audio DI boxes offer the rare versatility of having an onboard variable pad knob which attenuates your input signal all the way from -3dB to -30dB, which will easily tame any instrument input source. Both of our Direct Boxes offer a Thru-put jack that is jumpered to the input jack. It is a convenience jack allowing you to send your instrument's signal to a second place in addition to the live mixer or recording device. Our Direct Boxes can also take a recorded signal at line level and send it to another line input while simultaneously sending signal out of the XLR mic level output of the Direct Box. Typical Applications For A DI Box Connecting electronic instruments such as guitar, bass, keyboard, or drum machines directly to a PA or recording system. Simply put, a DI box converts the high impedance, unbalanced output signals to low impedance, balanced output signals. By doing so, the instrument signals are now converted to the proper voltage level for the PA or recording system - which greatly reduces and/or eliminates connections which could cause tonal shifts and distortion. Passive Or Active? Direct Box Active is best for instruments with passive pickups, especially acoustic instruments.  The Direct Box Active can also operate in "passive" mode. Direct Box Passive is best for balancing the signal of instruments with active electronics, but still performs extremely well on passive pickups by producing a frequency range that exceeds the bandwidth of most passive DI boxes on the market. Passive Specifications CUSTOM-WOUND CINEMAG USA OUTPUT TRANSFORMER CONVERTS INSTRUMENTS TO MIC-LEVEL SIGNALS WITHOUT SIGNAL DEGRADATION IDEAL SOLUTION FOR PLUGGING YOUR INSTRUMENT DIRECT INTO ANY MIC PRE TOP-QUALITY CLASS A COMPONENTS WITH GOLD-PLATED TRACES ON CIRCUIT BOARD RUGGED ALUMINUM CONSTRUCTION PAD: VARIABLE FROM -3DB TO -30DB BALANCED OUTPUTS: 600 OHMS, MIC LEVEL INPUT IMPEDANCE: 1 MEG OHMS  THD: .01% FROM 20HZ TO 50HZ. LESS THAN .003% FROM 50HZ TO 20KHZ FREQUENCY RESPONSE: 10HZ TO 90KHZ +/- 0.5DB

Uni-directional dynamic microphone for harmonica with volume ♦ Delivered with an impedance transformer The Saint Louis Prodipe microphone was designed with and for harmonica players. Its perfect ergonomics offer a greater comfort of play. The Saint Louis MIC offers a warm and dynamic sound that the harmonica players are looking for. This microphone comes with an impedance transformer to use a Jack cable directly into an amp or into effects pedals About the Saint Louis mic by Marko Balland, harmonicist "We went on tour with my friend Ronan Onemanband and on this tour we have sounded our stuff (our guitars acoustic, our amps, harmonica clear sound, vocals, our bass drum and our snare drum) on two speakers PRODIPE NATURAL 6 (140w) I also played on a microphone SAINT LOUIS PRODIPE. The result is fantastic, the sound of two speakers that still cash six instruments with a very good quality and a microphone harmonica that restores the clean sound .. thank PRODIPE for the quality of your products, Ronan and I thank you for your confidence...

The PRODIPE GUITARS ST80MA series follows the greatest tradition of SOLID BODY guitar manufacture.  The best craftsmen for an unmatched result: a good density basswood body, a neck in vintage varnished maple, a maple fingerboard for more brilliance and edge. We have also chosen to fit ALNICO V pickups, and a set of nickel-coated D'ADDARIO 9-42 strings for an exceptional result in this price range.  ALNICO V pickups are made with an aluminium-nickel-cobalt alloy, which offers several advantages :  Lower magnetic field than a ceramic pickup, for optimum string vibration giving more sustain. Unlike ceramic pickups, ALNICO pickups contain 6 separate magnets. This allows us to choose the perfect configuration for each string during manufacture, thus achieving better balance. The aluminium-nickel-cobalt alloy is also ideal for a palette of warm, full, precise sounds. Finally, the ST80MA/RA range has a pickup configuration consisting of three single coils, in the perfect tradition for faultless versatility. Available in Black, Sunburst, Candy Red, Sonic Blue and Fiesta Red. Brand : Prodipe Guitars Series : ST Model : ST80MA Body : basswood Neck : maple traditional varnish radius 9.5 inch Nut and saddle : ABS fitted Pickguard : three-ply ivory Pickups : ALNICO V, three single coils Fingerboard : maple Finition : traditional varnish Tuning machine : die-cast chrome Strings : D'ADDARIO EXL-120 - tension 9-42 Electronic : 5-way switch, 1 volume and 2 tone Bridge : standard vintage, six saddles

Prodipe clamp for CL21 Cello mic This clamp is only compatible with CL21 Cello mic

Prodipe is the permanent commitment to make professional products accessible to all. Designed with the help of Ludovic Lanen, the new IEM 5120 does not escape this rule: A reliable product that meets ANFR standards. A very stable UHF signal. A flawless return for only 249 € The IEM 5120 in detail: The Prodipe IEM5120 UHF personal monitor wireless system includes an audio transmitter and receiver built with the highest quality components to maintain a link between the audio source (mixing desk, front mix, soundtracks, etc.) and your ears via the IEM3 earphones and bodypack receiver. Boasting a set of professional in-ear monitors that offers comfort and discretion, the system provides on-stage singers, musicians and public speakers with excellent personal audio quality and complete freedom of movement. The Prodipe earphones have been ergonomically designed to ensure that no external noise can interfere with the listening experience for musicians on stage, on the road or in the studio. They offer perfect neutrality and an impeccable balance between lows and highs. They come with a carrying case and rubberized tips of different sizes.   In-ear monitor IEM3 Prodipe Earphone diameter: Ø 10mm Impedance: 16Ω Sensibility: 92dB±3 dB Frequency response: 10Hz at 22kHz Cable length: environ 1.2 m Connector type: Ø3.5mm stereo   IEM5120 (transmitter and bodypack): Transmission type: UHF UHF frequency range: 630MHz at 680 MHz Number of channels: 100 channels Dynamic: >90dB THD: ＜0.1% Frequency range: 30Hz～20KHz Operating range: 60m (optimum conditions outside) S/N ratio: ＞105dB   IEM5120 transmitter: Output power: 10mW Audio input: Combo XLR/Jack 6.35mm (x2) Audio input: Jack 3.5mm (left+right) Audio output : Jack 6.35mm (left+right) Audio headphone output headphonet: Jack 6.35mm Dimensions (W x H x D) : 220mm x 47mm x 186mm Weight: 780g   Bodypack receiver: Audio output: Jack 3.5mm (casque audio stéréo) Battery: two AA batteries (not included) Battery life: about 8 hours (optimum conditions outside) Sensibility :

It is one of the most talented compact speakers of its generation. Awarded the famous 5-star label What Hi-Fi, the Eltax Monitor III shines with a thousand qualities. The serious product is prodigious considering its small size. Two speakers drive this compact speaker, one 13 cm bass midrange speaker loaded in Bass-reflex through a lower tubular vent, as well as a soft dome tweeter, for a response from 50 Hz to 22 kHz. The tweeter is solidly motorized and offers a very detailed high-midrange register, synonymous with relief and precision. The Eltax Monitor III is equally at home in hi-fi and home cinema. Best of all, the speaker has decoupling pins and a bi-amplification terminal block.

Ένα μικρό ηχείο με ιδιαίτερα καλό ήχο για την κατηγορία και το μέγεθος του. Hi-Fi σε πολύ λογική τιμή ! 2-way bass reflex system Max. power 60W Max. power 90W Frequency range +/- 4 dB 60-22.000Hz Impedance 4-8 Ohm 25 mm soft dome tweeter Woofer 130 mm, shielded Dimensions (HxWxD) 245 x 155 x 195mm Weight 3.2Kg Calvados finish, Light beech, Black and white

The DALI OBERON VOKAL is designed to be the perfect match with any of the speakers in the OBERON series to form a complete surround system. Delivering a precise, clear and detailed sound performance for both your movie as well concert sound track. The placement of the front-facing bass port on the front baffle supports different placement options in your TV furniture.  We have united the best elements from our current speakers and brought them together in the OBERON VOKAL to deliver on audio quality, looks and versatility. The OBERON VOKAL houses an oversized 29 mm soft dome tweeter together with 2 x 5.25" SMC based wood fibre woofers - supported by the front-facing bass port, which makes the center speaker easy to place. For these reasons, it's the perfect choice for surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 89.5 Nominal Impedance [ohms]: 4 Maximum SPL [dB]: 109 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,600 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 46 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 0 - 50 Dimensions With Base (HxWxD) [mm]: 161 x 441 x 295 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 7.45

The DALI OBERON VOKAL is designed to be the perfect match with any of the speakers in the OBERON series to form a complete surround system. Delivering a precise, clear and detailed sound performance for both your movie as well concert sound track. The placement of the front-facing bass port on the front baffle supports different placement options in your TV furniture.  We have united the best elements from our current speakers and brought them together in the OBERON VOKAL to deliver on audio quality, looks and versatility. The OBERON VOKAL houses an oversized 29 mm soft dome tweeter together with 2 x 5.25" SMC based wood fibre woofers - supported by the front-facing bass port, which makes the center speaker easy to place. For these reasons, it's the perfect choice for surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 89.5 Nominal Impedance [ohms]: 4 Maximum SPL [dB]: 109 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,600 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 46 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 0 - 50 Dimensions With Base (HxWxD) [mm]: 161 x 441 x 295 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 7.45

The DALI OBERON VOKAL is designed to be the perfect match with any of the speakers in the OBERON series to form a complete surround system. Delivering a precise, clear and detailed sound performance for both your movie as well concert sound track. The placement of the front-facing bass port on the front baffle supports different placement options in your TV furniture.  We have united the best elements from our current speakers and brought them together in the OBERON VOKAL to deliver on audio quality, looks and versatility. The OBERON VOKAL houses an oversized 29 mm soft dome tweeter together with 2 x 5.25" SMC based wood fibre woofers - supported by the front-facing bass port, which makes the center speaker easy to place. For these reasons, it's the perfect choice for surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 89.5 Nominal Impedance [ohms]: 4 Maximum SPL [dB]: 109 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,600 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 46 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 0 - 50 Dimensions With Base (HxWxD) [mm]: 161 x 441 x 295 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 7.45

The DALI OBERON VOKAL is designed to be the perfect match with any of the speakers in the OBERON series to form a complete surround system. Delivering a precise, clear and detailed sound performance for both your movie as well concert sound track. The placement of the front-facing bass port on the front baffle supports different placement options in your TV furniture.  We have united the best elements from our current speakers and brought them together in the OBERON VOKAL to deliver on audio quality, looks and versatility. The OBERON VOKAL houses an oversized 29 mm soft dome tweeter together with 2 x 5.25" SMC based wood fibre woofers - supported by the front-facing bass port, which makes the center speaker easy to place. For these reasons, it's the perfect choice for surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 89.5 Nominal Impedance [ohms]: 4 Maximum SPL [dB]: 109 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,600 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 46 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 0 - 50 Dimensions With Base (HxWxD) [mm]: 161 x 441 x 295 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 7.45

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. The 29 mm ultra light-weight soft dome tweeter integrates seamlessly with the 7” wood fibre (SMC based) woofer for impressive highs, detailed and crisp mids and a surprising coherent and well-timed bass. The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 87 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 5 - 50 Dimensions With Base (HxWxD) [mm]: 350 x 200 x 315 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 6.3

The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. The 29 mm ultra light-weight soft dome tweeter integrates seamlessly with the 7” wood fibre (SMC based) woofer for impressive highs, detailed and crisp mids and a surprising coherent and well-timed bass. The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 87 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 5 - 50 Dimensions With Base (HxWxD) [mm]: 350 x 200 x 315 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 6.3

The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. The 29 mm ultra light-weight soft dome tweeter integrates seamlessly with the 7” wood fibre (SMC based) woofer for impressive highs, detailed and crisp mids and a surprising coherent and well-timed bass. The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 87 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 5 - 50 Dimensions With Base (HxWxD) [mm]: 350 x 200 x 315 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 6.3

The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. The 29 mm ultra light-weight soft dome tweeter integrates seamlessly with the 7” wood fibre (SMC based) woofer for impressive highs, detailed and crisp mids and a surprising coherent and well-timed bass. The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 87 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 5 - 50 Dimensions With Base (HxWxD) [mm]: 350 x 200 x 315 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 6.3

Given its ultra-compact size, the OBERON 1 is the smallest addition to the OBERON line-up. The cabinet size enables an optimal balance between inner volume optimised for bass performance, and a compact cabinet design suited for smaller rooms, discreet audio setups or wall mounting.  Like its larger siblings, the OBERON 1 makes use of the oversized 29 mm ultra light-weight soft dome tweeter to handle the highs and detailed mids, while the SMC based 5.25" wood fibre woofer renders the lower midrange and well-timed bass. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.  The compactness of the OBERON 1 makes it easy to integrate into any room. To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied in the OBERON 1 have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 51 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 106 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,800 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 1 - 50 Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234 Weight [kg]: 4.2

Given its ultra-compact size, the OBERON 1 is the smallest addition to the OBERON line-up. The cabinet size enables an optimal balance between inner volume optimised for bass performance, and a compact cabinet design suited for smaller rooms, discreet audio setups or wall mounting.  Like its larger siblings, the OBERON 1 makes use of the oversized 29 mm ultra light-weight soft dome tweeter to handle the highs and detailed mids, while the SMC based 5.25" wood fibre woofer renders the lower midrange and well-timed bass. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.  The compactness of the OBERON 1 makes it easy to integrate into any room. To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied in the OBERON 1 have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 51 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 106 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,800 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 1 - 50 Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234 Weight [kg]: 4.2

Given its ultra-compact size, the OBERON 1 is the smallest addition to the OBERON line-up. The cabinet size enables an optimal balance between inner volume optimised for bass performance, and a compact cabinet design suited for smaller rooms, discreet audio setups or wall mounting.  Like its larger siblings, the OBERON 1 makes use of the oversized 29 mm ultra light-weight soft dome tweeter to handle the highs and detailed mids, while the SMC based 5.25" wood fibre woofer renders the lower midrange and well-timed bass. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.  The compactness of the OBERON 1 makes it easy to integrate into any room. To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied in the OBERON 1 have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 51 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 106 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,800 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 1 - 50 Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234 Weight [kg]: 4.2

Given its ultra-compact size, the OBERON 1 is the smallest addition to the OBERON line-up. The cabinet size enables an optimal balance between inner volume optimised for bass performance, and a compact cabinet design suited for smaller rooms, discreet audio setups or wall mounting.  Like its larger siblings, the OBERON 1 makes use of the oversized 29 mm ultra light-weight soft dome tweeter to handle the highs and detailed mids, while the SMC based 5.25" wood fibre woofer renders the lower midrange and well-timed bass. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.  The compactness of the OBERON 1 makes it easy to integrate into any room. To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied in the OBERON 1 have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 51 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 106 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,800 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 1 - 50 Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234 Weight [kg]: 4.2

Capture every detail, every time  Designed for musicians and performers who demand outstanding audio quality, the PreSonus PX-1 cardioid condenser microphone is an ideal solution for recording vocals, guitar, podcasts, and much more. A true large-diaphragm condenser microphone, the PX-1 features a 25mm, gold-sputtered capsule designed to provide exceptional clarity throughout its frequency response range. Rugged construction and top-quality performance specifications make the PX-1 large diaphragm microphone an excellent addition for any home recording or streaming studio.

Get brilliant sound anywhere with the weatherproof and drop-resistant Move. Control with your voice, the Sonos app, and Apple AirPlay 2 at home, and stream via Bluetooth when WiFi isn't available. Experience surprisingly deep bass, a wide soundscape, and automatic Trueplay™ tuning that perfectly balances the sound for where you are and what you're listening to. WiFi at home, Bluetooth everywhere else: Stream over WiFi and connect Move to the rest of your Sonos system at home. Switch to Bluetooth when you're away and offline. Weather-resistant: With an IP56 rating, Move stands up to humidity, rain, snow, dust, salt spray, UV rays, and extreme heat and cold. Battery that lasts: Enjoy up to 10 hours of continuous play time and deep, powerful sound. Easily recharge Move on the included base, or get power on the go with the USB-C travel charger. Grab and go: Move fits seamlessly into the included charging base and features an ergonomic handle, making it easy to pick up and carry. Ultra-durable: Don't worry about accidental drops or bumps. Move's components are protected by a hardwearing, shock-resistant case.Simple recharging: No need to plug Move in. Set the speaker on the included indoor charging base for quick power while you listen. Features: Two Class-D digital amplifiers perfectly tuned to match the speaker drivers and acoustic architecture. Responsive audio chime lets you know Sonos Move has heard you and is working on a response. Far-field microphone array uses smart voice capture and noise cancellation. One downward-firing tweeter creates a crisp, clear high-frequency response that disperses evenly for an ultra-wide soundscape. One mid-woofer integrated into the cabinet ensures faithful playback of mid-range vocal frequencies plus deep, rich bass.

The PF6ATM compact speaker was specifically designed to be placed atop a floorstanding speaker. Facing the ceiling, it reproduces surround effects present in the Dolby Atmos audio tracks offered by new Blu-ray movies. It adds a vertical dimension to the sound of a traditional 5.1 system to offer the viewer more realism and greater immersion. With the Elipson Prestige Facet 6ATM, the home cinema experience is more intense than ever before. These speakers handle the full range of immersive multichannel formats and add a vertical dimension to the listening experience. They have inherited all the trademarks of the Prestige Facet range: an elegant design, high-quality materials, a meticulous finish... As for their sonic performance, it is certified Dolby Atmos and meets a demanding set of criteria. The speaker is equipped with a 14 cm driver installed in a sealed enclosure for the reproduction of lows and mids. A bullet-shaped phase plug is installed in the center of the driver to limit vibrations and, consequently, reduce distortion. The driver's multifaceted, sculpted silicone surround ring serves to reduce the baffle effect and limit diffractions. At the front, a 25 mm soft dome tweeter offers ultra-efficient sound directivity, which is required for sound waves to reflect off the ceiling properly and for mid-highs to be kept from reaching the side walls. The result is a frequency response ranging from 65 Hz to 25 kHz (± 3 dB). Its 15° angle allows it to be placed atop a floorstanding speaker in order to obtain optimal reproduction of surround sound effects and live the intense experience of total immersion. Specifications : Speaker Atmos Number of way 2 Power 70 W RMS Tweeter 25 mm Mid-bass driver 140 mm Frequency Response (±3 dB)65 Hz - 25 kHz Sensitivity 90 dB/1W/1m Impedance 6 Ohms Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)207 x 181 x 290 mm Weight4,8 kg Weight with packaging, pair (W x H x D)370 x 300x 370 mm Weight with packaging, pair10,5 kg

The little sister of the Prestige Facet range has been equipped with an integrated amplifier to connect to today's world. With the PF6B BT, Elipson has created what it calls Connected High-Fidelity. With a true stereo sound broadcast through high-quality speakers, streaming enthusiasts will rediscover the world's most well-loved tracks. The Prestige Facet 6B BT allow the Facet family to count itself among a new generation of connected speakers. Standing at the crossroads of high fidelity and connected speakers, this model offers the best of both worlds. From the hi-fi universe, it inherits its precise and extremely musical sound, all while offering wireless connectivity and compatibility with any Bluetooth device. Benefiting from the same quality of manufacturing as the Prestige Facet 6B, the Prestige Facet 6B BT additionally feature a Class-D amplifier and relies on energy efficient components for its power supply. Easy to install, they simply need to be plugged into the mains supply and paired with a smartphone, tablet or Bluetooth-enabled computer, thus guaranteeing you a simplified user experience on a daily basis. The APTX Bluetooth receiver handles high-res files.. Also equipped with several analog inputs, including a phono input, and featuring a digital optical input, the Prestige Facet 6B BT are highly versatile and can be connected to all your personal audio devices (turntable, CD player, TV, Blu-ray player…). Specifications : Speaker Active bookshelf Bass-reflex Number of way 2 Power2 x 70 W RMS Tweeter 1 " Mid-bass driver5 " Amplifier Classe D, integrated Frequency Response (±3 dB) 57 Hz - 25 kHz Standby after sixty minutes Sensitivity 90 dB/1W/1m Impedance 6 Ohms Input RCA line, RCA Phono, 3,5mm jack, Optical S/PDIF Output Sub out (20-220 Hz at ± 3dB) Bluetooth Yes aptX Yes Remote control Include Custom-made loudspeakers Rubber edge Loudspeakers On specifications Reinforcement Internals Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)176 x 298 x 225 mm Weight Active : 7 kg / Passive : 5,6 kg Weight with packaging, pair (W x H x D) 400 x 460 x 300 mm Weight with packaging, pair 14 kg

The Elipson SUB8 is the element which brings breadth and depth to your films. Compact, it blends in harmoniously with your interior and delivers all the intensity you'll need.Subwoofers are a fundamental part of a home cinema installation. The Elipson SUB8 is the element of choice to bring breadth and depth to your films. It is equipped with a 26 cm driver installed in a bass-reflex configuration. As such, it is designed to produce a considerable amount of sound pressure and offer a physical listening experience.The Elipson SUB8's elegantly designed cabinet inherits exclusive technologies from the Prestige Facet family and is available in black, white or walnut.The subwoofer's very linear frequency response ranges from 35 Hz to 150 Hz (± 3 dB). Its multifaceted, sculpted silicone surround ring limits diffractions and minimizes the baffle effect. The frequency response curve is thus more gradual and the listening experience more comfortable. The bass-reflex port situated beneath the subwoofer improves the diffusion of low and infrabass frequencies throughout the entire listening room regardless of where the subwoofer is placed. The integrated Class D amplifier develops 150 watts of power.The diameter of its driver and its performance make the Elipson SUB8 an element of choice to complete your home cinema installation and bring it all the intensity required by the Seventh Art.Specifications :Speaker SubwooferPower 150 W RMSWoofer 8 "Class D Frequency Response (±3 dB)35 Hz - 150 HzSubsonic filter 24 dB à 20 HzVariable cut-off frequency 50 Hz à 150 HzStandby Auto Input Stereo line level, LFECustom-made loudspeakers Rubber edgeLoudspeakers On specificationsFinish Lacquered front panel, MDF box & vinyl veneerColors Black, White, Black/WalnutDimensions (W x H x D)350 x 374 x 383 mmWeight15,5 kgDimensions packaging (W x H x D)445 x 500 x 435 mmWeight with packaging, unit16,7 kg

The PRODIPE GUITARS ST83RA series follows the greatest tradition of SOLID BODY guitar manufacture. The best craftsmen for an unmatched result: a good density basswood body, a neck in vintage varnished maple, a rosewood fingerboard for a warmer, less percussive sound. We have also chosen to fit ALNICO V pickups, and a set of nickel-coated D'ADDARIO 9-42 strings for an exceptional result in this price range. ALNICO V pickups are made with an aluminium-nickel-cobalt alloy, which offers several advantages : Lower magnetic field than a ceramic pickup, for optimum string vibration giving more sustain. Unlike ceramic pickups, ALNICO pickups contain 6 separate magnets. This allows us to choose the perfect configuration for each string during manufacture, thus achieving better balance. The aluminium-nickel-cobalt alloy is also ideal for a palette of warm, full, precise sounds. Finally, the pickup configuration of the ST83RA range comprises a double coil pickup and two single coils; the double pickup provides a high output level, ideal for heavy saturations and without parasite sound. Specifications : Brand : PRODIPE GUITARS Series : ST83RA Model : ST83RA Body : Basswood Neck : Maple traditional varnish radius 9.5 inch Nut and saddle : ABS fitted Pickguard : Three-ply ivory Pickups : ALNICO V, 1 double and 2 single coils Fingerboard : Artificial rosewood Finition : Traditional varnish Tuning machine : Die-cast chrome Strings : D'ADDARIO EXL-120 - Tension 9-42 Electronic : 5-way switch, 1 volume and 2 tone Bridge : Standard vintage, six saddles

ALTAMIRA is produced by great luthiers who are recognised worldwide. This new collaboration with PRODIPE GUITARS enables us to offer you a faultless instrument in the tradition of the great luthiers of the past. Soundboard of solid German cedar and bone nut and bridge on a guitar costing only 319 €! Apart from its sound quality, the finish is remarkable: a superb traditional gloss varnish and double maple binding. The attractive price at this level of excellence makes the PRODIPE GUITARS RECITAL 200 a world reference in music conservatories. Specifications : Brand : Classical guitar Prodipe Guitars by Altamira Series : Recital by Altamira Model : Recital 200 Top : Solid german cedar Back and sides : African mahogany Binding filets : Double maple Neck : African mahogany Nut and saddle : Fitted bone Veneer : Mahogany Fingerboard : Rosewood Finition : Gloss varnish Tuning machine : Top of the range nickel-plated Strings : D'ADDARIO EXP J44/J46 or SAVAREZ Cantiga Alliance

The most requested range of PRIMERA guitars is evolving. Because everyone has the right to the best and whatever their budget, PRODIPE GUITARS launches the PRIMERA EQ. Designed for musicians and their comfort, the new EQ model incorporates the same characteristics as the acoustic model: Spruce top, back and sides in Mahogany Fitted bone for the Nut and saddle Double carbon reinforcements inserted in the neck for an optimal comfort, a thinner handle, a better balance and a reduced weight. Because we build instruments with the needs of the musician in mind, the new PRIMERA EQ is built with a 48 mm width at nut, always more comfort and a simplified access for acoustic guitarists looking for nylon feelings. Always equipped with our preamp EC1 - PRODIPE, extremely powerful and easy to use, it is already a reference thanks to its respect of the acoustic sound of the guitar and its bluffing presence. The EC1 pre-amplifier was conceived for a single purpose: to give a very natural, balanced sound rich in harmonics.

With Prodipe, as per usual, it's all about the music and the musician. At unbeatable value for money, the Studio22+ USB audio interface faithfully carries on the Prodipe tradition.Whether you use it for recording, home studio work or live performances, at only €89, the Studio22+ is absolutely essential for music lovers, amateur musicians, and professional musicians.The new Prodipe Studio22+ is a first-rate audio interface for Mac and PC. It comes with a USB DAC (digital to analog converter) and the Prodipe driver, ASIO 2, for near-zero latency (less than 1 millisecond).Features:Equipped with combined XLR/Jack input, stereo USB input and output, stereo output for monitoring and separate headphone output.Included is a high-quality audio chipset for creating recordings that are ultra smooth and exceptionally warm.But the Studio22+ is also self-contained, so your mics, instruments, monitor speakers and headphones can all be plugged in directly.Specifications:Power LED  (green)Mac OS compatible (CoreAudio)Windows compatible (Prodipe ASIO 2.0)USB power (USB A to B cable supplied)External power supply possible: DC 5Volts/500mA (via USB: USB charger, smartphone charger, etc non supplied )3 pin XLR connector (IEC 60268 standard), pin 1: ground, pin 2: hot (+), and pin 3: cold (-)Power consumption: 2.5 Watts (max)Dimensions: (W x H x D) 109mm x 52mm x104 mmWeight: 0.5kg  

The Elipson RAIN speakers are the ideal solution to bring sound to your indoor and outdoor living areas without compromising on sound quality. This range of state-of-the-art speakers is suitable for any environment, no matter the weather conditions. The Elipson RAIN two-way speakers are veritable all-terrain models that are just as suited to intense cold or hot temperatures as they are to extreme humidity. These weatherproof speakers will be at home by the poolside, in the garden, in a sunroom or under a porch, but also in bars, restaurants, kitchens, spas or outdoor terraces. The RAIN speakers are meticulously assembled and come with an ultra-rigid, anti-UV case and a rustproof grill, all of which contribute to their extensive lifespan. Each RAIN model has an integrated wall mount system. Easy to install, this system provides a 180° dispersion angle, ensuring optimal sound quality that fills the entire area. Three sizes are available depending on the amount of power needed: the RAIN 4, RAIN 6 and RAIN 8 which feature a mid-bass driver of 4”, 6.5” and 7.9” respectively. The Elipson RAIN speakers are available in a white or black finish.   Specifications : Type 2-way outdoor speaker Power 150W Frequency Response (±3 dB) 70Hz - 20KHz Crossover frequency 3200 Hz Sensitivity 90 dB/1W/1m Impedance 8 Ohms Loudspeakers Tweeter : 1" Mid-bass : 8" Dimensions W244 x H355 x D230 mm Indice de protection IPX4 Température min -25°C Température max +70°C (25% humidity) Résistance à l'humidité +40°C under 95% Traitements Anti-rust, anti-UV